L6004V8RP [LITTELFUSE]
4 Quadrant Logic Level TRIAC, 600V V(DRM), 4A I(T)RMS, TO-251AA, VPAK-3;型号: | L6004V8RP |
厂家: | LITTELFUSE |
描述: | 4 Quadrant Logic Level TRIAC, 600V V(DRM), 4A I(T)RMS, TO-251AA, VPAK-3 栅极 触发装置 可控硅 三端双向交流开关 |
文件: | 总10页 (文件大小:905K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
®
Description
4 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Sensitive type devices guarantee gate control in Quadrants
I & IV needed for digital control circuitry.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Features & Benefits
• RoHS Compliant
contact bounce that
create voltage transients
Agency Approval
• Glass – passivated
junctions
• No contacts to wear out
from reaction of switching
events
Agency
Agency File Number
• Voltage capability up to
1000 V
L Package : E71639
®
• Restricted (or limited) RFI
generation, depending on
activation point of
• Surge capability up to
55 A
Main Features
• Electrically isolated
“L-Package” is UL
recognized for 2500Vrms
sine wave
Symbol
IT(RMS)
Value
Unit
A
• Requires only a small gate
activation pulse in each
half-cycle
4
• Solid-state switching
eliminates arcing or
VDRM/VRRM
IGT (Q1)
400 to 1000
3 to 25
V
mA
Applications
Schematic Symbol
Typical applications are AC solid-state switches, power
tools, home/brown goods and white goods appliances.
Sensitive gateTriacs can be directly driven by
microprocessor or popular opto-couplers/isolators.
MT2
MT1
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
G
Absolute Maximum Ratings — SensitiveTriacs (4 Quadrants)
Symbol Parameter
IT(RMS)
Value
Unit
Lxx04Ly / Lxx04Dy
Lxx04Ry / Lxx04Vy
f = 50 Hz
TC = 85°C
TC = 75°C
t = 20 ms
t = 16.7 ms
RMS on-state current
(full sine wave)
4
A
33
40
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
ITSM
A
f = 60 Hz
I2t
I2t Value for fusing
tp = 8.3 ms
6.6
A2s
Critical rate of rise of on-state current
(IG = 50mA with ≤ 0.1μs rise time)
di/dt
f = 120 Hz
50
A/μs
TJ = 110°C
IGTM
PG(AV)
Tstg
TJ
Peak gate trigger current
Average gate power dissipation
Storage temperature range
tp ≤ 10 μs
1.2
A
TJ = 110°C
TJ = 110°C
0.3
W
°C
°C
-40 to 150
-40 to 110
Operating junction temperature range
Note: xx = voltage, y = sensitivity
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
51
Revised: June 24, 2011 04:57 PM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Absolute Maximum Ratings — StandardTriacs
Symbol
Parameter
Value
Unit
Qxx04Ly / Qxx04Dy
TC = 95°C
RMS on-state current
(full sine wave)
IT(RMS)
4
A
Qxx04Ry / Qxx04Vy
f = 50 Hz
TC = 85°C
t = 20 ms
t = 16.7 ms
46
55
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
ITSM
A
f = 60 Hz
I2t
I2t Value for fusing
tp = 8.3 ms
12.5
A2s
Critical rate of rise of on-state current
(IG = 50mA with ≤ 0.1μs rise time)
di/dt
f = 120 Hz
50
A/μs
TJ = 125°C
tp ≤ 10 μs;
IGTM
Peak gate trigger current
1.2
A
TJ = 125°C
TJ = 125°C
IGT ≤ IGTM
PG(AV)
Tstg
Average gate power dissipation
0.3
W
°C
°C
Storage temperature range
Operating junction temperature range
-40 to 150
-40 to 125
TJ
Note: xx = voltage, y = sensitivity
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — SensitiveTriac (4 Quadrants)
Symbol
Test Conditions
Quadrant
I – II – III
Lxx04x3
Lxx04x5
Lxx04x6
Lxx04x8
Unit
3
3
5
5
5
10
20
IGT
MAX.
mA
VD = 12V RL = 60 Ω
IV
10
VGT
VGD
IH
ALL
ALL
MAX.
MIN.
MAX.
1.3
V
V
VD = VDRM RL = 3.3 kΩ TJ = 110°C
0.2
IT = 100mA
5
10
25
15
1
10
30
20
1
15
35
25
1
mA
400V
600V
25
15
dv/dt
VD = VDRM Gate Open TJ = 100°C
(di/dt)c = 2.16 A/ms TJ = 110°C
TYP.
V/μs
(dv/dt)c
tgt
TYP.
TYP.
0.5
2.8
V/μs
μs
IG = 2 x IGT PW = 15μs IT = 5.6 A(pk)
3.0
3.0
3.2
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — StandardTriac
Symbol
Test Conditions
Quadrant
I – II – III
Qxx04x3
Qxx04x4
Unit
MAX.
TYP.
10
25
1.3
0.2
20
40
30
25
50
1.3
0.2
30
75
50
40
50
2
IGT
mA
VD = 12V RL = 60 Ω
IV
VGT
VGD
IH
I – II – III
ALL
MAX.
MIN.
MAX.
V
V
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 200mA
mA
400V
600V
800V
1000V
VD = VDRM Gate Open TJ = 125°C
dv/dt
MIN.
V/μs
VD = VDRM Gate Open TJ = 100°C
(di/dt)c = 2.16 A/ms TJ = 125°C
IG = 2 x IGT PW = 15μs IT = 5.6 A(pk)
(dv/dt)c
tgt
TYP.
TYP.
2
V/μs
μs
2.5
3.0
Note: xx = voltage, x = package
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
52
Revised: June 24, 2011 04:57 PM
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Static Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
VTM
Test Conditions
Value
1.60
5
Unit
V
ITM = 5.6A tp = 380 µs
MAX.
TJ = 25°C
TJ = 110°C
TJ = 25°C
TJ = 125°C
TJ = 100°C
400-600V
400-600V
400-1000V
400-800V
1000V
μA
μA
μA
Lxx04xy
200
10
IDRM
IRRM
VDRM = VRRM
MAX.
Qxx04xy
2
mA
3
Thermal Resistances
Symbol
Parameter
Value
3.5
Unit
L/Qxx04Dy
L/Qxx04Ly
L/Qxx04Ry
3.6
Junction to case (AC)
°C/W
°C/W
Rθ(J-C)
3.6
L/Qxx04Vy
L/Qxx04Ly
L/Qxx04Ry
L/Qxx04Vy
6.0
50
45
70
Junction to ambient
Rθ(J-A)
Note: xx = voltage, x = package, y = sensitivity
Figure 2: Normalized DC GateTrigger Current for
All Quadrants vs. JunctionTemperature
Figure 1: Definition of Quadrants
ALL POLARITIES ARE REFERENCED TO MT1
4.0
3.0
2.0
1.0
0.0
MT2 POSITIVE
(Positive Half Cycle)
+
MT2
MT2
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
MT1
REF
MT2
REF
MT2
QII QI
QIII QIV
I
-
+ I
GT
GT
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
REF
MT1
REF
-65
-40
-40
10
35
60
85
110
125
-
Junction Temperature (TJ)- ºC
MT2 NEGATIVE
(Negative Half Cycle)
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
53
Revised: June 24, 2011 04:57 PM
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: Normalized DC GateTriggerVoltage for
All Quadrants vs. JunctionTemperature
4.0
3.0
2.0
1.0
0.0
2.0
1.5
1.0
0.5
0.0
-65
-40
-40
10
35
60
85
110
125
-65
-40
-40
10
35
60
85
110
125
Junction Temperature (TJ)- ºC
Junction Temperature (TJ)- ºC
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. On-State Current
4.0
110
CURRENTWAVE FORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASETEMPERATURE: Measured as shown
on Dimensional Drawing
105
100
95
90
85
80
75
70
65
60
CURRENTWAVE FORM: Sinusoidal
3.0
2.0
1.0
0.0
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
Lxx04Ly
Lxx04Dy
Lxx04Vyz
Lxx04Ry
LXX04Vy
0
1
2
3
4
5
6
0.0
1.0
2.0
3.0
4.0
5.0
RMS On-State Current (IT(RMS)) - Amps
RMS On-State Current (IT(RMS)) - Amps
Figure 7: Maximum Allowable CaseTemperature
vs. On-State Current
Figure 8: Maximum Allowable AmbientTemperature
vs. On-State Current
120
110
CURRENTWAVE FORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASETEMPERATURE: Measured as shown
on Dimensional Drawing
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
105
100
95
90
85
80
75
70
65
60
CONDUCTION ANGLE: 360°
100
FREE AIR RATING – NO HEATSINK
Lxx04Ly
Lxx04Dy
80
Qxx04Ly
Qxx04Ry
Lxx04Vyz
60
Lxx04Ry
LXX04Vy
L/Qxx04Vy
40
Lxx04Ly
20
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
0
1
2
3
4
5
6
RMS On-State Current (IT(RMS)) - Amps
RMS On-State Current [IT(RMS)] - Amps
Note: xx = voltage, y = sensitivity
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
54
Revised: June 24, 2011 04:57 PM
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Figure 9: On-State Current vs. On-StateVoltage (Typical)
20
18
16
14
12
10
8
TJ = 25°C
6
4
2
0
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Positive or Instantaneous
On-StateVoltage (VT) -Volts
Figure 10: Surge Peak On-State Current vs. Number of Cycles
100
Qxx04Ry
Qxx04Ly
Qxx04Dy
Qxx04Vy
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State [IT(RMS)]: Max Rated Value at
Specific Case Temperature
Notes:
Lxx04Ry
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
10
Lxx04Ly
Lxx04Dy
Lxx04Vy
1
1
10
100
1000
Surge Current Duration – Full Cycles
Note: xx = voltage, y = sensitivity
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
55
Revised: June 24, 2011 04:57 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260°C +0/-5
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell time
Temperature Cycling
Terminal Material
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell
time at each temperature; 10 sec (max)
transfer time between temperature
Thermal Shock
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
56
Revised: June 24, 2011 04:57 PM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
MT2
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
K
N
L
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
MT1 MT2
GATE
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
B
C
13.36
.526
D
7. 01
.276
F
F
G
H
J
R
G
L
H
K
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
J
MT1 MT2
M
GATE
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
57
Revised: June 24, 2011 04:57 PM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Dimensions —TO-251AA (V-Package) —V-PAKThrough Hole
TC MEASURING POINT
AREA: 0.040 IN2
Inches
Typ
Millimeters
Typ
Dimension
E
H
J
5.28
.208
MT2
A
Min
Max
0.050
0.245
0.375
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
0.052
0.044
0.044
0.084
Min
1.02
5.97
8.89
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
1.06
0.86
0.86
1.86
Max
1.27
6.22
9.53
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
1.32
1.11
D
A
B
C
D
E
F
0.040
0.235
0.350
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
0.042
0.034
0.034
0.074
0.044
0.242
0.361
0.208
0.262
0.031
0.090
0.092
0.180
0.020
0.040
0.020
0.047
0.039
0.039
0.079
1.11
6.15
9.18
5.29
6.66
0.80
2.28
2.34
4.57
0.51
1.01
5.34
.210
B
R
P
Q
S
K
C
G
H
I
MT1
L
F
MT2
GATE
G
J
I
K
L
0.52
1.20
P
Q
R
S
1.00
1.00
1.11
2.00
2.11
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount
E
6.71
.264
MT2
A
5.28
.208
Inches
Typ
Millimeters
Typ
TC MEASURING POINT
D
Dimension
Min
0.040
0.235
0.106
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
0.000
0.021
0°
Max
0.050
0.245
0.113
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
0.004
0.027
5°
Min
1.02
5.97
2.69
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
0.00
0.53
0°
Max
1.27
6.22
2.87
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
0.10
0.69
5°
6.71
.264
5.34
.210
A
B
C
D
E
F
0.043
0.243
0.108
0.208
0.262
0.031
0.090
0.092
0.179
0.020
0.040
0.020
0.000
0.026
0°
1.09
B
6.16
2.74
1.60
.063
P
Q
C
1.80
.071
5.29
6.65
0.80
2.28
2.33
4.55
0.51
1.02
GATE
F
AREA: 0.040 IN2
MT1
MT2
3
.118
4.60
.181
G
I
G
H
I
L
O
H
K
J
M
N
J
K
L
0.51
0.00
0.67
0°
M
N
O
P
Q
0.042
0.034
0.047
0.039
0.052
0.044
1.06
0.86
1.20
1.32
1.11
1.00
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
58
Revised: June 24, 2011 04:57 PM
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
Product Selector
Voltage
Gate Sensitivity Quadrants
Part Number
Type
Package
400V
X
600V
800V
1000V
I – II – III
3 mA
3 mA
3mA
IV
Lxx04L3
Lxx04D3
Lxx04R3
Lxx04V3
Lxx04L5
Lxx04D5
Lxx04R5
Lxx04V5
Lxx04L6
Lxx04D6
Lxx04R6
Lxx04V6
Lxx04L8
Lxx04D8
Lxx04R8
Lxx04V8
Qxx04L3
Qxx04D3
Qxx04V3
Qxx04R3
Qxx04L4
Qxx04D4
Qxx04R4
Qxx04V4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3 mA
3 mA
3mA
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
SensitiveTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
StandardTriac
TO-220L
TO-252 D-PAK
TO-220R
X
X
X
3 mA
5 mA
5 mA
5mA
3 mA
5 mA
5 mA
5mA
TO-251 V-PAK
TO-220L
X
X
TO-252 D-PAK
TO-220R
X
X
5 mA
5 mA
5 mA
5mA
5 mA
10 mA
10 mA
10mA
10 mA
20 mA
20 mA
20mA
20 mA
TO-251 V-PAK
TO-220L
X
X
TO-252 D-PAK
TO-220R
X
X
5 mA
10 mA
10 mA
10mA
10 mA
10 mA
10 mA
10 mA
10mA
25 mA
25 mA
25mA
25 mA
TO-251 V-PAK
TO-220L
X
X
TO-252 D-PAK
TO-220R
X
X
TO-251 V-PAK
TO-220L
X
X
TO-252 D-PAK
TO-251 V-PAK
TO-220R
X
X
X
X
X
X
X
X
X
X
X
TO-220L
X
TO-252 D-PAK
TO-220R
X
X
TO-251 V-PAK
Packing Options
Part Number
Marking
Weight
2.2 g
2.2 g
0.3 g
0.3 g
0.4 g
Packing Mode
Base Quantity
L/Q004L/Ry/TP
L/Qxx04L/Ry
L/Qxx04Ly
L/Qxx04Dy
L/Qxx04Dy
L/Qxx04Vy
Bulk
Tube
500
L/Qxx04LyTP
L/Qxx04DyRP
500 (50 per tube)
2500
Embossed Carrier
Tube Pack
L/Qxx04DyTP
750 (75 per tube)
750 (75 per tube)
L/Qxx04VyTP
Tube Pack
Note: xx = Voltage; y = Sensitivity
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
59
Revised: June 24, 2011 04:57 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
4 Amp Sensitive & Standard Triacs
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.157
(4.0)
0.059
(1.5)
DIA
Gate
MT1
0.63
(16.0)
0.524
(13.3)
*
0.315
(8.0)
*
Cover tape
MT2
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Part Numbering System
Q60 04 L 4 xx
Part Marking System
TO-251AA &
TO-252AA
(V and D Packages)
LEAD FORM DIMENSIONS
xx : Lead Form Option
DEVICE TYPE
L : Sensitive Triac
Q : Standard Triac
Q6004R4
YM
®
SENSITIVITY & TYPE
Sensitive Triac:
VOLTAGE RATING
3 : 3 mA (QI, II, III, IV)
5 : 5 mA (QI, II, III, IV)
6 : 5 mA (QI, II, III)
10 mA (QIV)
8 : 10 mA (QI, II, III)
20 mA (QIV)
40 : 400V
60 : 600V
80 : 800V
K0 : 1000V
Standard Triac:
3 : 10 mA (QI, II, III)
4 : 25 mA (QI, II, III)
Q6004L4
CURRENT RATING
04 : 4A
PACKAGE TYPE
MY
L :TO-220 Isolated
R :TO-220 Non-Isolated
V :TO-251 (V-Pak)
D :TO-252 (D-Pak)
®
Lxx04xx & Qxx04xx Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
60
Revised: June 24, 2011 04:57 PM
Please refer to http://www.littelfuse.com for current information.
相关型号:
©2020 ICPDF网 联系我们和版权申明