LF31134TMR [LITTELFUSE]

Magnetic Field Sensor,;
LF31134TMR
型号: LF31134TMR
厂家: LITTELFUSE    LITTELFUSE
描述:

Magnetic Field Sensor,

文件: 总6页 (文件大小:660K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
High Sensitivity Low Power TMR Switch  
Position Sensing > LF11115TMR  
TMR Bipolar Switch 17 Gauss 200nA Push Pull Sensor  
Description  
The LF11115TMR TMR Switch is a digital bipolar magnetic switch that integrates  
TMR and CMOS technology in order to provide a magnetically triggered digital  
switch with high sensitivity, high speed, and low power consumption.  
It contains a TMR magnetic sensor and CMOS signal processing circuitry within  
the same package, including an on-chip TMR voltage generator for precise  
magnetic sensing, a TMR voltage amplifier and comparator plus a Schmitt  
trigger to provide switching hysteresis for noise rejection, CMOS push-pull  
output and X axis sensing direction.  
An internal band gap regulator is used to provide a temperature compensated  
supply voltage for internal circuits, permitting a wide range of supply voltages.  
It draws only 200nA (see Features below) resulting in low power operation,  
additionally it has fast response, accurate switching points, excellent thermal  
stability, and immunity to stray field interference. It is available in the SOT23-3  
package. The output of the LF11115TMR switches low (turns on) when the  
magnetic field parallel to the sensing axis exceeds the operate point threshold,  
BOP. When the magnetic field is reduced below the release point BRP device  
output switches high (turns off). The difference between the BOP and the BRP is  
the hysteresis BH of the device.  
Functional Block Diagram  
Vcc  
Power regulator  
with temperature  
compensation  
Offset  
TMR  
Sensor  
Features  
Vout  
Latch  
cancellation  
• X axis sensing direction  
• Tunneling Magnetoresistance (TMR)  
technology  
• Ultra low power consumption at  
200nA  
• High frequency up to 50Hz  
• Operation with north and south pole  
• 1.8V to 5.5V operating range  
GND  
Benefits  
• Low switching points for high  
sensitivity  
TMR Switch Typical Applications Circuit  
• Wider airgap capability  
• Operates with smaller magnets for  
cost reduction  
• Excellent thermal stability  
• High tolerance to external magnetic  
field interference  
• RoHS compliant  
Vcc  
Vcc  
Out  
TMR  
0.1µF  
Applications  
Out  
• Proximity detection  
• Utility meters including gas and  
water meters  
• Speed sensing  
• Battery powered applications  
• Rotary sensing  
GND  
Output Behavior Versus Magnetic Pole  
GND  
Parameter  
Test Conditions  
Output (volts)  
Note: It is strongly recommended that an external bypass capacitor be connected in-close-  
proximity to the device between the supply and ground pins to reduce noise. The recommended  
value for the external bypass capacitor is 0.1μF.  
South Pole  
North Pole  
B > BOPS  
Low (On)  
High (Off)  
0 < B < BRPS  
Note:  
The output is “High” when power is turned on under zero magnetic field.  
When a S Pole approaches the pin 1 side, Vout will transition to Low.  
When a N Pole approaches the pin 1 side, Vout will transition to High  
© 2020 Littelfuse  
Revised: 02/20/20  
littelfuse.com  
Specifications are subject to change without notice.  
High Sensitivity Low Power TMR Switch  
Position Sensing > LF11115TMR  
Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified)  
Symbol  
Characteristics  
Values  
Unit  
VCC  
VRCC  
IOUTSINK  
B
Supply Voltage  
Reverse Supply Voltage  
Output Current  
7.0  
0.3  
V
V
9.0  
mA  
Gauss  
kV  
Magnetic Flux Density  
ESD level(HBM)  
4000  
4
VESD  
TA  
Operating Temperature  
Storage Temperature  
-40 ~ 125  
-50 ~ 150  
°C  
Tstg  
°C  
Note: Stresses greater than the ‘Absolute Maximum Ratings’ specified above may cause permanent damage to the device. These are stress ratings only; functional operation of the device at these or any  
other conditions exceeding those indicated in this specification is not implied. Device reliability may be affected by exposure to absolute maximum rating conditions for extended periods of time.  
Electrical Characteristics (@TA = +25°C, Vcc = 3.0V)  
Symbol  
Characteristics  
Min.  
Typ.  
Max.  
Unit  
Conditions  
VCC  
Supply Voltage  
1.8  
3
5.5  
V
V
Operating  
VOH  
VOL  
Output High Voltage  
Vcc -0.3  
Output Low Voltage  
0.2  
V
ICC  
Supply Current  
200  
50  
nA  
Hz  
Output Open  
Freq  
Response Frequency  
Magnetic Characteristics (@TA = +25°C, Vcc = 3.0V)  
Symbol  
Characteristics  
Min.  
Typ.  
Max.  
Unit  
BOP  
BRP  
BH  
Operation Point  
Release Point  
Hysteresis  
9
17  
-17  
34  
25  
-9  
Gauss  
Gauss  
Gauss  
-25  
© 2020 Littelfuse  
Revised: 02/20/20  
littelfuse.com  
Specifications are subject to change without notice.  
High Sensitivity Low Power TMR Switch  
Position Sensing > LF11115TMR  
Pin Configuration and Sensing Direction of Magnetic Field  
OUT  
V
OH  
V
SOT23-3  
GND  
3
Part Marking Code  
H
B
Exxxꢀ  
OL  
V
1
2
0
ꢀB  
RP  
B
OP  
B
N Pole  
S Pole  
Vcc  
VOUT  
Part Marking Code:  
Magnetic Flux  
Exxxy: E = LF11115TMR; xxx = Julian manufactured date; y = manufactured year  
Moisture Sensitivity Level: Rating is 3  
Pick and Place Nozzle: Samsung CN140 or equivalent  
Pin Name  
Pin No. SOT23-3  
Pin Function  
VOUT  
2
3
1
Output  
Ground  
GND  
VCC  
Supply Voltage  
Part Numbering System  
LF - X - X - X - X - X TMR  
Littelfuse Brand  
Tunneling  
Magnetoresistance  
Technology Switch  
SwitchType  
Type 1 = Bipolar  
2 = Omnipolar  
3 = Unipolar  
Sensitivity Gauss  
1 = 5 Gauss  
2 = 7 Gauss  
3 = 10 Gauss  
4 = 14 Gauss  
5 = 17 Gauss  
Output  
1 = PushPull  
2 = Open Drain  
Quiescent Current  
1 = 200nA  
2 = 1.5uA  
3 = 0.6mA  
Sensing Axis  
1 = X axis  
2 =Y axis  
Example: LF11115 is Bipolar, Push Pull, 200nA, X axis, 17Gauss  
Note: Every combination is NOT offered. Contact Littelfuse for availability.  
3 = Z axis  
© 2020 Littelfuse  
Revised: 02/20/20  
littelfuse.com  
Specifications are subject to change without notice.  
High Sensitivity Low Power TMR Switch  
Position Sensing > LF11115TMR  
Soldering Profile for Lead-free packages  
Tape and Reel  
ØA  
ØN  
ØB  
C
W1  
W2  
W3  
178 2  
54 2  
13.2 0.3  
2.2 0.3  
8.4 1.5ꢀ0.0  
12 MAX  
1.4 0.4  
© 2020 Littelfuse  
Revised: 02/20/20  
littelfuse.com  
Specifications are subject to change without notice.  
High Sensitivity Low Power TMR Switch  
Position Sensing > LF11115TMR  
SOT23-3 Package Information  
Dimensions in Millimeters  
Dimensions in Inches  
Symbol  
Min  
Nom  
Max  
1.45  
0.15  
1.30  
0.70  
0.49  
0.19  
3.05  
3.00  
1.75  
1.05  
2.00  
0.60  
Min  
-
Nom  
-
Max  
A
-
-
-
0.057  
0.006  
0.051  
0.028  
0.019  
0.007  
0.120  
0.118  
0.069  
0.041  
0.079  
0.024  
A1  
A2  
A3  
b
0.00  
0.90  
0.60  
0.39  
0.12  
2.85  
2.60  
1.55  
0.85  
1.80  
0.35  
0.000  
0.035  
0.024  
0.015  
0.005  
0.112  
0.102  
0.061  
0.033  
0.071  
0.014  
-
1.10  
0.65  
-
0.043  
0.026  
-
c
-
-
D
2.95  
2.80  
1.65  
0.95  
1.90  
0.45  
0.59REF  
0.25BSC  
-
0.116  
0.110  
0.065  
0.037  
0.075  
0.018  
0.023REF  
0.01BSC  
-
E
E1  
e
e1  
L
L1  
L2  
Ø
00  
80  
00  
80  
© 2020 Littelfuse  
Revised: 02/20/20  
littelfuse.com  
Specifications are subject to change without notice.  
High Sensitivity Low Power TMR Switch  
Position Sensing > LF311115TMR  
TMR Sensor Position (SOT23-3 Elements)  
Important Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive,  
military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or  
any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage)  
other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for  
products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or  
damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation.  
The sale and use of Littelfuse products is subject to LittelfuseTerms and Conditions of Sale, unless otherwise agreed by Littelfuse.  
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the  
suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all  
applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics.  
© 2020 Littelfuse  
Revised: 02/20/20  
littelfuse.com  
Specifications are subject to change without notice.  

相关型号:

LF31135TMR

Magnetic Field Sensor,
LITTELFUSE

LF311H

Voltage Comparators
NSC

LF311RU

Very Wide Input, 3W SMT Single & Dual Output DC/DC Converters
MPD

LF311RW

Wide Input, 3W SMT Single & Dual Output DC/DC Converters
MPD

LF31212TMR

Magnetic Field Sensor,
LITTELFUSE

LF31213TMR

Magnetic Field Sensor,
LITTELFUSE

LF312RU

Very Wide Input, 3W SMT Single & Dual Output DC/DC Converters
MPD

LF312RW

Wide Input, 3W SMT Single & Dual Output DC/DC Converters
MPD

LF31313TMR

Magnetic Field Sensor,
LITTELFUSE

LF31333TMR

Magnetic Field Sensor,
LITTELFUSE

LF313RU

Very Wide Input, 3W SMT Single & Dual Output DC/DC Converters
MPD

LF313RW

Wide Input, 3W SMT Single & Dual Output DC/DC Converters
MPD