MDSR-7-10-25 [LITTELFUSE]
Dry Reed Switch, SPST, 0.5A, 200VDC, Through Hole-straight,;型号: | MDSR-7-10-25 |
厂家: | LITTELFUSE |
描述: | Dry Reed Switch, SPST, 0.5A, 200VDC, Through Hole-straight, |
文件: | 总2页 (文件大小:365K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Axial Lead Reed Switches
Low Power > MDSR-7
MDSR-7 12.7mm Sub-miniature Reed Switch
RoHS
Description
The MDSR-7 Reed Switch is a sub-miniature, normally open switch with a
12.70mm long x 1.80mm diameter (0.500” x 0.071”) glass envelope, capable of
switching 200Vdc at 10W. It has high insulation resistance of 10¹² ohms
minimum and low contact resistance of less than 100 milli-ohms.
Features
• Sub-miniature normally open
switch
• Available sensitivity range
10-25 AT
• Capable of switching 200V or 0.5A
at up to 10W
Agency Approvals
Benefits
• Hermetically sealed switch
contacts are not affected by and
have no effect on their external
environment
• Zero operating power required
for contact
• Excellent for switching micro-
controller logic level loads
Agency
Agency File Number
Ampere-Turns Range
E47258
E471070
10-25 AT
10-25 AT
• Low, stable contact resistance
DEMKO 14 ATEX 1393U
Applications
• Reed Relays (particularly suited
to ATE type applications)
• Security Systems
• Limit Switching
• Office Equipment
Dimensions
Dimensions in mm (inch)
20.19
(.795) REF.
0.47
1.80
Switch Type
CL OF OVERLAP
(0.185) DIA. REF.
(.071) MAX.
Contact Form
A (SPST-NO)
13.46
(.530) MIN.
12.70
(.500) MAX.
Body: Glass
Leads: Tin-plated Ni-Fe wire
Materials
40.38
(1.590) NOM.
Note: SPST-NO = Single-pole, single-throw, normally open
Electrical Ratings
Contact Rating 1
W/VA - max.
10
Switching 2
Vdc - max.
Vac - max.
Vdc - min.
200
140
250
Voltage 3
Current 3
Breakdown 4
Switching 2
Adc - max.
Aac - max.
Adc - max.
0.5
0.35
0.80
Carry
Contact, Initial
Insulation
Ω - max.
Ω - min.
0.100
1012
Resistance
Capacitance
Temperature
Notes:
Contact
pF - typ.
0.3
Operating
Storage 5
°C
°C
-40 to +125
-65 to +125
1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information.
2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details.
3. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load.
4. Breakdown Voltage - per MIL-STD-202, Method 301.
5. Storage Temperature - Long time exposure at elevated temperature may degrade solderability of the leads.
© 2015 Littelfuse
Revised: 10/09/15
littelfuse.com
Specifications are subject to change without notice.
Axial Lead Reed Switches
Low Power > MDSR-7
MDSR-7 12.7mm Sub-miniature Reed Switch
Product Characteristics
Operating Characteristics
Operate Time 1
Release Time 1
0.6ms - max.
0.2ms - max.
100G - max.
30G - max.
Shock 2
11ms 1∕2 sine wave
50-2000 Hertz
Vibration 2
Resonant Frequency
5.5kHz - typ.
Magnetic Characteristics
Pull-In Range 3
Ampere Turns
Ampere Turns
10-25
Rating Sensitivity 4
Test Coil
20
L4989
Notes:
1. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A,diode suppressed coil (Coil II).
2. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202.
3. Pull-In Range - Contact Littelfuse for narrower AT ranges available.
4. Rating Sensitivity - The value at which contact ratings and operating characteristics are determined. Derating may be required below this value.
5. Custom modifications of forming and/or cutting of reed switches are available. Please contact Littelfuse.
Drop-Out vs. Pull-In Chart
Part Numbering System
25
MDSR-7-10-15
20
15
10
Max.
Min.
Series
AT Range
10-25 AT
10-15 AT
15-20 AT
20-25 AT
Example:
10-15 AT product is
MDSR-7-10-15
5
0
Note: These AT values are the before-modification values of the bare reed switch.
0
5
10
15
20
25
30
35
Pull-In (AT, L4989 Coil)
Note: Chart represents the range of Drop-Out, min to max for a given Pull-In value.
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity & Packaging Code
Taping Width
Bulk
Bulk
1000
N/A
N/A
© 2015 Littelfuse
Revised: 10/09/15
littelfuse.com
Specifications are subject to change without notice.
相关型号:
MDSS-5DLS
Circular DIN Connector, 5 Contact(s), Female, Board Mount, Solid Lead Terminal, Socket
BEL
MDSS-65DLS
Circular DIN Connector, 6 Contact(s), Female, Board Mount, Solder Terminal, Receptacle,
BEL
MDSS-65S
Circular DIN Connector, 6 Contact(s), Female, Board Mount, Solder Terminal, Receptacle,
BEL
MDSS-7DLS
Circular DIN Connector, 7 Contact(s), Female, Board Mount, Solder Terminal, Receptacle
BEL
©2020 ICPDF网 联系我们和版权申明