P4KE110C [LITTELFUSE]
Trans Voltage Suppressor Diode, 400W, 94V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AL, DO-41, 2 PIN;型号: | P4KE110C |
厂家: | LITTELFUSE |
描述: | Trans Voltage Suppressor Diode, 400W, 94V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AL, DO-41, 2 PIN |
文件: | 总6页 (文件大小:1079K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TransientVoltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Pb e3
RoHS
P4KE Series
Description
Bi-directional
The P4KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Uni-directional
Features
• 400W peak pulse
• Typical IR less than 1μA
when VBR min>12V
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in DO-41 Package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• VBR @TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Plastic package is
flammability rated V-0 per
Underwriters Laboratories
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
PPPM
Value
400
Unit
W
Peak Pulse Power Dissipation by
10/1000μsTest Waveform (Fig.2)
(Note 1), (Note 4)
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
Steady State Power Dissipation on
Infinite Heat Sink atTL=75ºC
PD
1.5
60
W
A
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
30kV(Air), 30kV (Contact) • Pb-free E3 means 2nd
IFSM
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
• ESD protection of data
lines in accordance with
IEC 61000-4-2
• EFT protection of data
lines in accordance with
IEC 61000-4-4
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional
Only (Note 3)
VF
3.5/5.0
V
Operating Junction and Storage
Temperature Range
TJ, TSTG -55 to 175 °C
TypicalThermal Resistance Junction
to Lead
°C/W
RθJL
RθJA
60
• Low incremental surge
resistance
TypicalThermal Resistance Junction
to Ambient
°C/W
100
Notes:
Applications
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
TVS devices are ideal for the protection of I/O interfaces,
CC bus and other vulnerable circuits used in telecom,
V
3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
computer, industrial and consumer electronic applications.
4. The PPPM of stacked-die parts is 600W and please contact littelfuse for the detail
stacked-die parts.
Functional Diagram
Additional Infomarion
Bi-directional
Datasheet
Samples
Resources
Cathode
Anode
Uni-directional
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Electrical Characteristics (TA=25°C unless otherwise noted)
Maximum
Clamping
Voltage
V @ Ipp
C (V)
Breakdown
Voltage
VBR@ IT (V)
Test
Current
IT
Reverse
Stand off
Voltage VR
(Volts)
Maximum
Peak
Pulse Current
Ipp (A)
Maximum
Reverse
Agency
Approval
Part
Number
(Uni)
Part
Number
(Bi)
Leakage
IR @ VR(µA)
(mA)
MIN
MAX
P4KE6.8A
P4KE7.5A
P4KE8.2A
P4KE9.1A
P4KE10A
P4KE11A
P4KE12A
P4KE13A
P4KE15A
P4KE16A
P4KE18A
P4KE20A
P4KE22A
P4KE24A
P4KE27A
P4KE30A
P4KE33A
P4KE36A
P4KE39A
P4KE43A
P4KE47A
P4KE51A
P4KE56A
P4KE62A
P4KE68A
P4KE75A
P4KE82A
P4KE91A
P4KE100A
P4KE110A
P4KE120A
P4KE130A
P4KE150A
P4KE160A
P4KE170A
P4KE180A
P4KE200A
P4KE220A
P4KE250A
P4KE300A
P4KE350A
P4KE400A
P4KE440A
P4KE480A
P4KE510A
P4KE530A
P4KE540A
P4KE550A
P4KE6.8CA
P4KE7.5CA
P4KE8.2CA
P4KE9.1CA
P4KE10CA
P4KE11CA
P4KE12CA
P4KE13CA
P4KE15CA
P4KE16CA
P4KE18CA
P4KE20CA
P4KE22CA
P4KE24CA
P4KE27CA
P4KE30CA
P4KE33CA
P4KE36CA
P4KE39CA
P4KE43CA
P4KE47CA
P4KE51CA
P4KE56CA
P4KE62CA
P4KE68CA
P4KE75CA
P4KE82CA
P4KE91CA
P4KE100CA
P4KE110CA
P4KE120CA
P4KE130CA
P4KE150CA
P4KE160CA
P4KE170CA
P4KE180CA
P4KE200CA
P4KE220CA
P4KE250CA
P4KE300CA
P4KE350CA
P4KE400CA
P4KE440CA
P4KE480CA
P4KE510CA
P4KE530CA
P4KE540CA
P4KE550CA
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17. 10
6.45
7. 13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17. 10
19.00
20.90
22.80
25.70
28.50
31.40
7. 14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.5
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
39.00
36.30
33.90
30.60
28.30
26.30
24.60
22.50
19.30
18.20
16.10
14.80
13.40
12.30
10.90
9.90
9.00
8.20
7.60
6.90
6.30
5.80
5.30
4.80
4.50
4.00
3.60
3.30
3.00
2.70
2.50
2.30
2.00
1.90
1.80
1.70
1.50
1.30
1.20
1.00
0.85
0.75
0.68
0.61
0.57
0.55
0.54
0.52
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
451.00
460.00
468.00
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is 10% and VC is 5% higher than with A parts
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 400W > P4KE series
I-V Curve Characteristics
Bi-directional
Uni-directional
Ipp
IT
IR
Vc VBR
VR
V
Vc VBR
VR
IR
IT
V
VRVBR Vc
IR
IT
VF
Ipp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to theTVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though theTVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across theTVS at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 -TVSTransients ClampingWaveform
Figure 2 - Peak Pulse Power Rating Curve
Voltage Transients
100
T
initial =T
J
amb
Voltage Across TVS
10
1
stacked-die, 600W
at 10x1000µs, 25°C
Current Through TVS
Single die,400W
at 10x1000µs, 25°C
0.1
0.001
0.01
0.1
td-Pulse Width (ms)
1
10
Time
continues on next page.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)
Figure 3 - Peak Pulse Power Derating Curve
Figure 4 - PulseWaveform
150
100
75
50
25
0
t =10µsec
r
T
=25°C
J
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
Peak Value
I
100
PPM
Half Value
I
PPM
I
PPM
( )
2
50
0
10/1000µsec. Waveform
as defined by R.E.A
t
d
0
25
50
75
100
125
150
175
200
1.0
2.0
t-Time (ms)
3.0
4.0
0
TJ - Initial Junction Temperature (ºC)
Figure 5 -Typical Junction Capacitance
Figure 6 -TypicalTransientThermal Impedance
100
10000
Uni-direcꢀonal V=0V
Bi-direcꢀonal V=0V
1000
10
1
100
10
1
Uni/Bi-direcꢀonal
V=VR
0.1
1
10
100
1000
0.01
0.1
1
10
100
1000
T
- Pulse Duration (s)
P
VBR - Reverse Breakdown Voltage (V)
Figure 7 - Maximum Non-Repetitive Forward Surge
Current Uni-Directional Only
Figure 8 - Peak ForwardVoltage Drop vs Peak Forward
Current (TypicalValues)
100.0
70
60
50
40
30
20
10
0
Single die
Stacked-die
10.0
1.0
0.1
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
1
10
100
V
- Peak Forward Voltage(V)
F
Number of Cycles at 60 Hz
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Soldering Parameters
Lead–free
tp
Reflow Condition
assembly
TP
Ramp-up
Critical Zone
to T
-Temperature Min (Ts(min)
)
150°C
T
L
P
TL
tL
Pre Heat -Temperature Max (Ts(max)
-Time (min to max) (ts)
)
200°C
Ts(max)
60 – 180 secs
Ramp-down
Ts(min)
Average ramp up rate (LiquidusTemp (TA)
to peak
ts
3°C/second max
Preheat
TS(max) toTA - Ramp-up Rate
3°C/second max
217°C
25˚C
t 25˚C to Peak
-Temperature (TA) (Liquidus)
Reflow
Time (t)
-Time (min to max) (ts)
60 – 150 seconds
260+0/-5 °C
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
Flow/Wave Soldering (Solder Dipping)
20 – 40 seconds
PeakTemperature :
DippingTime :
Soldering :
260OC
Ramp-down Rate
6°C/second max
8 minutes Max.
260°C
5 seconds
1 time
Time 25°C to peakTemperature (TP)
Do not exceed
Environmental Specifications
Physical Specifications
Weight
Case
0.012oz., 0.3g
HighTemp. Storage
HTRB
JESD22-A103
JEDEC DO-204AL (DO-41) molded
plastic body over passivated junction.
JESD22-A108
JESD22-A104
JESD22-A101
JESD22-B106
Color band denotes the cathode except
Bipolar.
Temperature Cycling
H3TRB
Polarity
MatteTin axial leads, solderable per
JESD22-B102.
Terminal
RSH
Dimensions
Inches
Millimeters
Min Max
Dimensions
Cathode Band
(for Uni-directional products only)
Min
Max
D
A
B
C
D
1.000
0.160
0.028
0.080
-
25.40
4.10
-
C
0.205
0.034
0.107
5.20
0.86
2.70
0.71
2.00
A
A
B
DO-204AL (DO-41)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
TransientVoltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Part Numbering System
Part Marking System
P4KE xxxXXX
OPTION CODE:
BLANK ReelTape
-B Bulk Packaging
Cathode Band
(for Uni-directional
products only)
YYWW
TYPE CODE:
A
Uni-Directional (5% VBR VoltageTolerance)
Trace Code Marking
YY:Year Code
WW: Week Code
CA Bi-Directional (5% VBR VoltageTolerance)
Littelfuse Logo
V
BR VOLTAGE CODE
P4KEXXX
(Refer to the Electrical Characteristics table)
Product Type
SERIES CODE
Packaging
Component
Quantity
Packaging
Option
Part Number
P4KExxxXX
Packaging Specification
EIA STD RS-296
Package
DO-204AL
DO-204AL
5000
500
Tape & Reel
BOX
P4KExxxXX-B
Littelfuse Spec.
Tape and Reel Specification
Off Center
either side
0.028(0.7)
2.56
(65.0)
2.063+0.079/-0.039
(53.0+2.0/-1.0)
0.236
(6.0)
0.047
(1.2)
0.197+/-0.020
(5.0+/- 0.5)
Dimensions are in
inches/mm
13.0
(330.2)
3.0
(76.2)
0.68
(17. 27)
2.75
(69.85)
Direction of Feed
Recess Depth Max. 0.75 (19.05)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
相关型号:
P4KE110C-BP
Trans Voltage Suppressor Diode, 400W, 94V V(RWM), Bidirectional, 1 Element, Silicon, DO-41, PLASTIC PACKAGE-2
MCC
P4KE110C-GT3
Trans Voltage Suppressor Diode, 400W, 89.2V V(RWM), Bidirectional, 1 Element, Silicon, DO-41, LEAD FREE, PLASTIC PACKAGE-2
SENSITRON
P4KE110C-T3
Trans Voltage Suppressor Diode, 400W, 89.2V V(RWM), Bidirectional, 1 Element, Silicon, DO-41, PLASTIC PACKAGE-2
SENSITRON
P4KE110C-T3-LF
Trans Voltage Suppressor Diode, 400W, 89.2V V(RWM), Bidirectional, 1 Element, Silicon, DO-41, ROHS COMPLIANT, PLASTIC PACKAGE-2
WTE
P4KE110C-TB
Trans Voltage Suppressor Diode, 400W, 89.2V V(RWM), Bidirectional, 1 Element, Silicon, DO-41, PLASTIC PACKAGE-2
WTE
P4KE110CA
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State)
PANJIT
©2020 ICPDF网 联系我们和版权申明