Q6012RH256 [LITTELFUSE]
Alternistor TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3;
| 型号： | Q6012RH256 |
| 厂家： | 
LITTELFUSE |
| 描述： | Alternistor TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3 局域网 LTE 栅 三端双向交流开关 栅极 |
| 文件： | 总8页 (文件大小：685K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Thyristors
12 Amp Alternistor (High Commutation) Triacs
RoHS
Qxx12xHx Series
Description
This 12 Amp bidirectional solid state switch series is
designed for AC switching and phase control applications
such as motor speed and temperature modulation controls,
lighting controls, and static switching relays.
Standard alternistor triac components operate with in-phase
signals in Quadrants I or III and ONLY unipolar negative gate
pulses for Quadrant II or III. The alternistor triac will not
operate in Quadrant IV. These are used in circuit applications
requiring a high dv/dt capability.
Features & Benefits
• RoHS Compliant
• No contacts to wear
out from reaction of
switching events
Agency Approval
• Glass – passivated
junctions
Agency
Agency File Number
• Restricted (or limited) RFI
generation, depending
on activation point sine
wave
• Voltage capability up to
1000 V
E71639*
* - L Package Only
• Surge capability up to
120 A
• Requires only a small
gate activation pulse in
each half-cycle
Main Features
• The L-package has
an isolation rating of
2500VRMS
Symbol
Value
Unit
• Recognized to UL 1557
as an Electrically Isolated
Semiconductor Device
IT(RMS)
12
A
V
• Solid-state switching
eliminates arcing or
contact bounce that
create voltage transients
VDRM/VRRM
400, 600, 800 or 1000
10 or 50
IGT (Q1)
mA
Schematic Symbol
Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
MT2
MT1
Typical applications are AC solid-state switches, light
dimmers, power tools, lawn care equipment, home/brown
goods and white goods appliances.
G
AlternistorTriacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Additional Information
Datasheet
Resources
Samples
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 10/29/19
Thyristors
12 Amp Alternistor (High Commutation) Triacs
Absolute Maximum Ratings — Alternistor (3 Quadrants)
Symbol
Parameter
Value
Unit
Qxx12LHy
TC = 90°C
IT(RMS)
RMS on-state current (full sine wave)
12
A
Qxx12RHy
Qxx12NHy
TC = 105°C
f = 50 Hz
f = 60 Hz
t = 20 ms
t = 16.7 ms
tp = 8.3 ms
TJ = 125°C
TJ = 125°C
TJ = 125°C
110
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
ITSM
A
120
I2t
I2t Value for fusing
60
70
A2s
A/μs
A
di/dt
Critical rate of rise of on-state current
Peak gate trigger current
f = 120 Hz
tp=20μs
IGTM
4
PG(AV)
Average gate power dissipation
Storage temperature range
0.5
W
Tstg
-40 to 150
-40 to 125
°C
TJ
Operating junction temperature range
°C
Note: xx = voltage/10, y = sensitivity
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — AlternistorTriac (3 Quadrants)
Symbol
Test Conditions
Quadrant
Qxx12xH2
Qxx12xH5
Unit
IGT
VGT
VGD
IH
VD = 12V RL = 60 Ω
VD = 12V RL = 60 Ω
I – II – III
I – II – III
I – II – III
MAX.
MAX.
MIN.
MAX.
10
1.3
0.2
15
50
1.3
0.2
50
mA
V
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 100mA
V
mA
400V
600V
800V
1000V
300
200
150
150
2
750
650
500
300
30
VD = VDRM Gate Open TJ = 125°C
dv/dt
MIN.
V/μs
V
D = VDRM Gate Open TJ = 100°C
(di/dt)c = 6.5 A/ms TJ = 125°C
IG = 2 x IGT PW = 15μs IT = 17.0 A(pk)
(dv/dt)c
tgt
MIN.
TYP.
V/μs
μs
4
4
Static Characteristics
Symbol
Test Conditions
Value
Unit
VTM
ITM = 17.0A tp = 380 µs
MAX.
MAX.
1.60
10
2
V
TJ = 25°C
TJ = 125°C
TJ = 100°C
400-1000V
400-800V
1000V
μA
IDRM
IRRM
VD = VDRM / VRRM
mA
3
Thermal Resistances
Symbol
Parameter
Value
Unit
Qxx12RHy
1.2
Qxx12NHy
Qxx12LHy
Qxx12RHy
Qxx12LHy
RƟ(J-C)
Junction to case (AC)
°C/W
°C/W
2.3
45
90
RƟ(J-A)
Junction to ambient (AC)
Note: xx = voltage/10, y = sensitivity
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 10/29/19
Thyristors
12 Amp Alternistor (High Commutation) Triacs
Figure 2: Normalized DC GateTrigger Current for
All Quadrants vs. JunctionTemperature
Figure 1: Definition of Quadrants
ALL POLARITIES ARE REFERENCED TO MT1
4.0
MT2 POSITIVE
(Positive Half Cycle)
+
MT2
MT2
3.0
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
MT1
2.0
1.0
0.0
REF
MT2
REF
MT2
QII QI
QIII QIV
I
-
+ I
GT
GT
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
REF
MT1
REF
-65
-40
-15
10
35
60
85
110
-
Junction Temperature (TJ) - C
MT2 NEGATIVE
(Negative Half Cycle)
Note: Alternistors will not operate in QIV
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: Normalized DC GateTriggerVoltage for
All Quadrants vs. JunctionTemperature
4.0
3.0
2.0
1.0
0.0
2.0
1.5
1.0
0.5
0.0
-65
-40
-15
10
35
60
85
110
-65
-40
-15
10
35
60
85
110
Junction Temperature (TJ) - ºC
Junction Temperature (TJ) - ºC
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. On-State Current
130
14
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
Qxx12RH5
Qxx12NH5
12
120
10
8
110
100
Qxx12LH5
6
90
4
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
2
70
60
0
0
2
4
6
8
10
12
14
0
2
4
6
8
10
12
14
RMS On-State Current [IT(RMS)] -- Amps
RMS On-State Current [IT(RMS)] - Amps
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 10/29/19
Thyristors
12 Amp Alternistor (High Commutation) Triacs
Figure 7: Maximum Allowable AmbientTemperature
vs. On-State Current
Figure 8: On-State Current vs. On-StateVoltage
(Typical)
20
18
16
14
12
10
120
110
100
90
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
TC = 25ºC
FREE AIR RATING - No HEAT SINK
80
70
8
60
6
4
2
0
50
40
30
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
20
0.
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Positive or Negative Instantaneous On-State Voltage
(VT) - Volts
RMS On-State Current [IT(RMS)] - AMPS
Figure 9: Surge Peak On-State Current vs. Number of Cycles
1000
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State Current [I T(RMS) : Maximum]
Rated Value at Specific Case Temperature
100
10
1
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
1
10
100
1000
Surge Current Duration - Full Cycles
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 10/29/19
Thyristors
12 Amp Alternistor (High Commutation) Triacs
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
Average ramp up rate (LiquidusTemp) (TL) to peak 5°C/second max
)
150°C
TP
Pre Heat
)
200°C
Ramp-up
60 – 180 secs
TL
TS(max)
tL
Ramp-down
T
S(max) toTL - Ramp-up Rate
5°C/second max
217°C
Preheat
-Temperature (TL) (Liquidus)
-Time (min to max) (ts)
TS(min)
Reflow
60 – 150 seconds
260+0/-5 °C
tS
PeakTemperature (TP)
25
Time within 5°C of actual peakTemperature (tp)
Ramp-down Rate
20 – 40 seconds
5°C/second max
8 minutes Max.
280°C
time to peak temperature
Time
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Terminal Finish
Body Material
100% MatteTin-plated
UL Recognized compound meeting flammability
rating V-0
Test
AC Blocking
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied Peak
AC voltage @ 125°C for 1008 hours
Terminal Material
Copper Alloy
MIL-STD-750, M-1051,
Temperature Cycling
100 cycles; -40°C to +150°C; 15-min dwell time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/Humidity
Design Considerations
MIL-STD-750, M-1031,
1008 hours; 150°C
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
HighTemp Storage
Low-Temp Storage
1008 hours; -40°C
Resistance to Solder Heat MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 10/29/19
Thyristors
12 Amp Alternistor (High Commutation) Triacs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
TC MEA SURING POIN
T
AREA (REF .) 0. 17 IN 2
Inches
Millimeters
Min
Dimension
O
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
8.13
.320
A
Ø
E
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
MT2
B
C
13.36
.526
D
7.01
.276
F
G
H
J
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
K
L
R
G
L
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
H
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
M
R
0.97
1.22
MT1 MT2
GA TE
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
AREA (REF .) 0. 17 IN 2
Inches
Millimeters
TC MEA SURING POI NT
Dimension
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
O
8.13
.320
A
Ø
E
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
B
C
13.36
.526
D
7.01
.276
F
G
H
J
F
K
L
R
G
L
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
H
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
MT1 MT2
M
R
0.97
1.22
GA TE
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 10/29/19
Thyristors
12 Amp Alternistor (High Commutation) Triacs
Dimensions —TO-263AB (N-Package) — D2Pak Surface Mount
TC MEASURING POINT
C
AREA: 0. 11 IN2
Inches
Millimeters
Min
B
V
Dimension
E
Min
Max
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
Max
9.40
10.67
4.78
0.89
1.52
MT2
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
9.14
9.65
4.52
0.64
1.14
8.41
.331
7. 01
.276
A
S
W
U
J
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
1.91
K
GATE
MT1
G
H
J
2.67
2.59
0.61
2.79
15.88
1.14
8.13
.320
G
H
D
F
K
S
V
U
W
11 68
.460
2.16
.085
0.25
1.78
7.01
.276
7. 01
.276
16.89
.665
8.89
.350
1.40
.055
3.81
.150
2.03
.080
6.60
.260
Product Selector
Voltage
Gate Sensitivity Quadrants
Part Number
Type
Package
400V
600V
800V
1000V
I – II – III
10 mA
10 mA
10 mA
50 mA
50 mA
50 mA
Qxx12LH2
Qxx12RH2
Qxx12NH2
Qxx12LH5
Qxx12RH5
Qxx12NH5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
TO-220L
TO-220R
TO-263 D²-PAK
TO-220L
X
X
X
TO-220R
TO-263 D²-PAK
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Qxx12L/RHyTP
Qxx12NHyTP
Qxx12NHyRP
Qxx12L/RHy
Qxx12NHy
Qxx12NHy
2.2 g
1.6 g
1.6 g
Tube Pack
Tube
500 (50 per tube)
500 (50 per tube)
500
Embossed Carrier
Note: xx = Voltage/10; y = Sensitivity
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 10/29/19
Thyristors
12 Amp Alternistor (High Commutation) Triacs
TO-263 Embossed Carrier Reel Pack (RP)
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
MT1
0.059
(1.5)
DIA
0.945
(24.0)
0.827
(21.0)
*
*
Co ver tape
MT2
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
Part Marking System
TO-220 AB - (L and R Package)
Q 60 12 L H5 56
TO-263 AB - (N Package)
Device Type
Q: Alternistor
Lead Form Dimensions
xx: Lead Form Option
Voltage Rating
40: 400V
60: 600V
Sensitivity & type
H2: 10mA (QI, II, III)
H5: 50mA (QI, II, III)
Q6012RH5
YMXXX
80: 800V
®
K0: 1000V
Current Rating
12: 12A
Package Type
L : TO-220 Isolated
R : TO-220 Non-Isolated
N : TO-263 (D2Pak)
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimier-electronics.
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 10/29/19
相关型号：
Q6012RH2TP
Alternistor TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明