Q8025LH5TP [LITTELFUSE]
TRIAC ALTERNISTOR 800V 25A TO220;
| 型号： | Q8025LH5TP |
| 厂家： | 
LITTELFUSE |
| 描述： | TRIAC ALTERNISTOR 800V 25A TO220 LTE 三端双向交流开关 |
| 文件： | 总11页 (文件大小：990K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
RoHS
Qxx25xx & Qxx25xHx Series
Description
This 25 Amp bi-directional solid state switch series is
designed for AC switching and phase control applications
such as motor speed and temperature modulation controls,
lighting controls, and static switching relays.
Standard alternistor triac components operate with in-
phase signals in Quadrants I or III and ONLY unipolar
negative gate pulses for Quadrant II or III. The alternistor
triac will not operate in Quadrant IV.
Features & Benefits
• RoHS compliant
• Surge capability up
to 250A at 60 Hz
half cycle
• Glass – passivated
junctions
Agency Approval
• Voltage capability up
to 1000 V
Agency
Agency File Number
E71639*
* - Only Package Types TO-220L, TO-218K and TO-218J
Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Typical applications are AC solid-state switches, industrial
power tools, exercise equipment, white goods and
commercial appliances.
Main Features
Symbol
Value
Unit
Alternistor Triacs (no snubber required) are used in
applications with high inductive loads requiring the highest
commutation performance.
IT(RMS)
25
A
V
DRM/VRRM
IGT
1000
V
50 or 80
mA
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
Additional Information
MT2
MT1
ꢀꢁtꢁshꢂꢂt
ꢀꢁsoꢂrꢃꢁs
ꢀꢁꢂꢃꢄꢅs
G
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Absolute Maximum Ratings – StandardTriac
Symbol
Parameter
Test Conditions
Tc = 65°C
Value
Unit
Qxx25R5
Qxx25N5
Qxx25L5
IT(RMS)
RMS on-state current
25
A
TC = 95°C
full cycle; f = 50Hz;
TJ (initial) = 25°C
167
200
Qxx25R5
Qxx25N5
Qxx25L5
ITSM
Peak non-repetitive surge current
I2t Value for fusing
A
full cycle; f = 60Hz;
TJ (initial) = 25°C
Qxx25R5
Qxx25N5
Qxx25L5
I2t
tp = 8.3ms
166
A2s
di/dt
IGTM
Critical rate-of-rise of on-state current
Peak gate current
f = 60Hz;TJ =125°C
100
4
A/μs
A
tp=20μs, TJ =125°C
TJ = 125°C
PG(AV)
Tstg
Average gate power dissipation
0.5
W
Storage temperature range
-40 to 125
°C
Qxx25R5
Qxx25N5
Qxx25L5
TJ
Operating junction temperature range
-40 to 125
°C
Absolute Maximum Ratings – AlternistorTriac
Symbol
Parameter
Test Conditions
Value
Unit
Qxx25LH5
Qxx25L6
TC = 65°C
Qxx25K6
Qxx25J6
TC = 85°C
TC = 95°C
IT(RMS)
RMS on-state current
25
A
Qxx25RH5
Qxx25NH5
Qxx25R6
Qxx25NH6
full cycle; f = 50Hz;
TJ (initial) = 25°C
208
250
ITSM
Peak non-repetitive surge current
A
full cycle; f = 60Hz;
TJ (initial) = 25°C
I2t
I2t Value for fusing
Critical rate-of-rise of on-state current
Peak gate current
tp = 8.3ms
f = 60Hz;TJ =125°C
tp=20μs, TJ =125°C
TJ = 125°C
260
100
A2s
A/μs
A
di/dt
IGTM
4
PG(AV)
Average gate power dissipation
0.5
W
Tstg
TJ
Storage temperature range
-40 to 125
-40 to 125
°C
Operating junction temperature range
°C
Note: xx = voltage/10
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — StandardTriac
Value
Qxx25R5
Qxx25N5
Qxx25L5
Symbol
Test Conditions
Quadrant
Unit
I – II – III
IV
MAX.
TYP.
50
120
1.3
IGT
VD = 12V; RL = 60 Ω
VD = 12V; RL = 60 Ω
mA
V
I – II – III
IV
MAX.
TYP.
VGT
2.5
VGD
IH
VD = VDRM; RL = 3.3 kΩ ; TJ = 125°C
IT = 400mA (initial)
ALL
MIN.
0.2
V
MAX.
100
mA
400V
600V
800V
275
225
200
VD = VDRM; Gate Open; TJ = 125°C
dv/dt
MIN.
V/μs
VD = VDRM; Gate Open; TJ = 100°C
(di/dt)c = 13.3 A/ms; TJ = 125°C
IG = 2 x IGT; PW = 15µs; IT = 35.4 A
1000V
200
5
(dv/dt)c
tgt
MIN.
TYP.
V/μs
μs
4
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — AlternistorTriac
Value
Qxx25R6
Qxx25L6
Qxx25NH6
Qxx25K6
Qxx25J6
Qxx25RH5
Qxx25LH5
Qxx25NH5
Symbol
Test Conditions
Quadrant
Unit
IGT
VGT
VGD
IH
VD = 12V; RL = 60 Ω
VD = 12V; RL = 60 Ω
I – II – III
I – II – III
I – II – III
MAX.
MAX.
MIN.
MAX.
50
80
mA
V
1.3
VD = VDRM; RL = 3.3 kΩ ; TJ = 125°C
IT = 400mA (initial)
0.2
V
50
575
500
400
-
100
600
600
475
400
30
mA
400V
600V
800V
1000V
VD = VDRM; Gate Open; TJ = 125°C
dv/dt
MIN.
V/μs
VD = VDRM; Gate Open; TJ = 100°C
(di/dt)c = 13.3 A/ms; TJ = 125°C
IG = 2 x IGT; PW = 15µs; IT = 35.4 A
(dv/dt)c
tgt
MIN.
TYP.
20
3
V/μs
μs
5
Static Characteristics
Value
Qxx25R5
Qxx25N5
Qxx25xH5
Qxx25x6
Qxx25NH6
Qxx25L5
Symbol
Test Conditions
Unit
VTM
IT = 35.4A; tp = 380 μs
MAX.
MAX.
1.8
10
V
400 - 800V
1000V
TJ = 25°C
20
I
DRM / IRRM
VDRM / VRRM
400 - 800V
1000V
500
1000
2000
μA
TJ = 100°C
TJ = 125°C
400 - 800V
Note: xx = voltage/10, x = package
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Thermal Resistances
Symbol
Parameter
Value
Unit
Qxx25R5 / Qxx25N5
Qxx25R6 / Qxx25NH6
Qxx25RH5 / Qxx25NH5
0.89
RƟ(J-C)
Junction to case (AC)
Junction to ambient
°C/W
Qxx25L6 / Qxx25LH5 /Qxx25L5
Qxx25K6 / Qxx25J6
2.0
1.32
45
Qxx25Ry
RƟ(J-A)
°C/W
Qxx25L6 / Qxx25LH5 /Qxx25L5
50
Note: xx = voltage/10, y = sensitivity
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
2.5
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
125
-40
-15
10
35
60
85
110
Junction Temperature (TJ) -- (ºC)
Junction Temperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
2.0
1.5
1.0
0.5
0.0
90
TJ = 25°C
80
70
60
50
40
30
20
10
0
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
Qxx25R5
Qxx25N5
Qxx25L5
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
-40
-15
10
35
60
85
110
125
Instantaneous On-state Voltage (vT) – Volts
Junction Temperature (TJ) -- (ºC)
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Figure 5: Power Dissipation (Typical) vs. RMS
Figure 6: Maximum Allowable CaseTemperature
vs. RMS On-State Current
On-State Current
130
35
30
25
20
15
10
5
Qxx25R6
Qxx25NH6
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
120
Qxx25RH5
Qxx25NH5
Qxx25R5
Qxx25N5
Qxx25R5
Qxx25N5
Qxx25L5
Qxx25K6
Qxx25J6
110
100
90
Qxx25L6
Qxx25LH5
Qxx25L5
80
Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
70
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
60
0
50
0
5
10
15
20
25
0
5
10
15
20
25
30
RMS On-State Current [IT(RMS)] -- Amps
RMS On-State Current [IT(RMS)] - Amps
Figure 7: Maximum Allowable AmbientTemperature vs. RMS On-State Current (TO-220 packages only)
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
100
FREE AIR RATING
80
60
40
20
0
0.0
0.5
1.0
1.5
2.0
2.5
RMS On-State Current [IT(RMS)] -- Amps
Figure 8: Surge Peak On-State Current vs. Number of Cycles
1000
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified
Case Temperature
100
Notes:
1. Gate control may be lost during and immediately following surge current interval.
2. Overload may not be repeated until junction temperature has returned to steady-state
Qxx25R5
rated value.
Qxx25N5
Qxx25L5
10
1
10
100
1000
Surge Current Duration -- Full Cycles
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
)
150°C
TP
Pre Heat
)
200°C
Ramp-up
60 – 180 secs
TL
TS(max)
tL
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
5°C/second max
Ramp-down
Preheat
TS(max) toTL - Ramp-up Rate
TS(min)
-Temperature (TL) (Liquidus) 217°C
Reflow
tS
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
PeakTemperature (TP)
25
time to peak temperature
Time
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated
Test
Specifications and Conditions
UL Recognized compound meeting flammability
rating V-0
HighTemperature
Voltage Blocking
MIL-STD-750: Method 1040, Condition A
Rated VRRM, 125°C, 1008 hours
Copper Alloy
MIL-STD-750: Method 1051
-40°C to 125°C, 15-minute dwell,
100 cycles
Temperature Cycling
BiasedTemp &
Humidity
EIA/JEDEC: JESD22-A101
320VDC, 85°C, 85%RH, 1008 hours
Design Considerations
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75%
of the device rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
MIL-STD-750: Method 1031
150°C, 1008 hours
HighTemp. Storage
Low-Temp Storage
-40°C, 1008 hours
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability
Lead Bend
ANSI/J-STD-002, Category 3, Test A
MIL-STD-750: Method 2036, Condition E
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions —TO-220AB (R Package) — Non-isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
Dimension
O
8.13
.320
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
A
Ø
E
P
MT2
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7.01
.276
F
G
H
J
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
K
L
H
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
K
N
J
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
MT1 MT2
GATE
R
0.97
1.22
Dimensions —TO-220AB (L Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Millimeters
Inches
Dimension
O
Min
9.65
2.66
5.85
14.98
3.61
2.80
13.71
0.63
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.60
0.89
5.21
2.67
1.91
Min
Max
8.13
.320
A
Ø
E
P
A
B
C
D
E
0.380
0.420
B
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
C
13.36
.526
D
7.01
.276
F
F
G
H
J
R
G
L
H
K
L
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
MT1 MT2
M
GATE
M
N
O
P
1.78
2.16
0.61
4.78
1.53
0.45
4.52
1.14
R
0.97
1.22
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions —TO-263 (N Package) — D2Pak Surface Mount
TC MEASURING POINT
AREA: 0.11 IN2
Inches
Millimeters
C
B
V
Dimension
E
MT2
Min
Max
Min
Max
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
9.14
9.65
4.52
0.64
1.14
9.40
10.67
4.78
0.89
1.52
8.41
.331
7. 01
.276
A
S
W
U
J
K
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
1.91
GATE
MT1
G
H
J
2.67
2.59
0.61
2.79
15.88
1.14
8.13
.320
G
H
D
F
11.68
.460
2.16
.085
K
S
V
U
W
0.25
1.78
7. 01
.276
7. 01
.276
16.89
.665
8.89
.350
1.40
.055
3.81
.150
2.03
.080
6.60
.260
Dimensions —TO-218AC (K Package) — Isolated MountingTab
TC Measurement Point
Inches
Millimeters
U (diameter)
C
Dimension
B
Min
Max
Min
Max
D
A
B
C
D
E
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.211
0.422
0.058
0.045
0.095
0.008
0.008
0.164
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.219
0.437
0.068
0.055
0.115
0.016
0.016
0.165
0.095
20.57
15.49
4.52
1.40
21.21
16.00
4.78
1.78
A
F
E
W
12.37
16.13
0.56
1.91
12.62
16.64
0.74
Gate
F
J
P
G
H
J
MT1
MT2
2.41
15.88
5.56
11.10
1.73
H
M
Q
14.61
5.36
10.72
1.47
G
K
L
R
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
N
P
K
1.14
1.40
L
2.41
0.20
0.20
4.10
2.92
0.41
0.41
4.20
2.42
Q
R
U
W
2.17
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions —TO-218X (J Package) — Isolated MountingTab
C
Inches
Millimeters
Min
Dimension
D
B
Min
Max
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.264
0.228
0.088
0.177
0.042
0.121
0.096
0.166
0.165
0.618
0.005
0.012
0.032
0.095
Max
21.21
16.00
4.78
1.78
U (diameter)
A
B
C
D
E
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.256
0.220
0.080
0.169
0.034
0.113
0.086
0.156
0.164
0.603
0.000
0.003
0.028
0.085
20.57
15.49
4.52
1.40
T
c
Measurement
Point
A
F
Z
12.37
16.13
0.56
1.91
12.62
16.64
0.74
E
F
G
H
J
MT1
2.41
15.88
6.71
5.79
2.24
4.49
1.07
X
W
14.61
6.50
5.58
2.03
4.29
0.86
2.87
2.18
3.96
0.410
15.31
0.00
0.07
0.71
2.17
J
K
L
Gate
R
N
T
S
P
MT2
M
N
P
G
H
M
Y
K
L
R
S
T
3.07
2.44
4.22
0.420
15.70
0.13
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs . (0.904 Nm).
V
U
V
W
X
Y
Z
0.30
0.81
2.42
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Product Selector
Voltage
Gate Sensitivity Quadrants
Part Number
Package
400V
600V
800V
1000V
I - II - III
50 mA
50 mA
50 mA
50 mA
50 mA
50 mA
80 mA
80 mA
80 mA
80 mA
80 mA
IV
Qxx25R5
Qxx25N5
Qxx25L5
Qxx25RH51
Qxx25LH5
Qxx25NH5
Qxx25R6
Qxx25L6
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
120 mA (TYP)
TO-220R
TO-263 D2-Pak
TO-220L
120 mA (TYP)
120 mA (YTP)
-
-
-
-
-
-
-
-
TO-220R
-
TO-220L
TO-263 D2-Pak
-
X
X
X
-
TO-220R
TO-220L
TO-263 D2-Pak
Qxx25NH6
Qxx25J6
TO-218X
Qxx25K6
X
TO-218AC
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Qxx25R5TP
Qxx25N5TP
Qxx25N5RP
Qxx25RH5TP
Qxx25LH5TP
Qxx25NH5TP
Qxx25NH5RP
Qxx25R6TP
Qxx25L6TP
Qxx25NH6TP
Qxx25NH6RP
Qxx25J6TP
Qxx25R5
Qxx25N5
Qxx25N5
Qxx25RH5
Qxx25LH5
Qxx25NH5
Qxx25NH5
Qxx25R6
Qxx25L6
2.20g
1.60g
1.60g
2.20g
2.20g
1.60g
1.60g
2.20g
2.20g
1.60g
1.60g
5.23g
4.40g
2.20g
Tube
1000 (50 per tube)
1000 (50 per tube)
500
Tube
Embossed Carrier
Tube
1000 (50 per tube)
1000 (50 per tube)
1000 (50 per tube)
500
Tube
Tube
Embossed Carrier
Tube
1000 (50 per tube)
1000 (50 per tube)
1000 (50 per tube)
500
Tube
Qxx25NH6
Qxx25NH6
Qxx25J6
Tube
Embossed Carrier
Tube
250 (25 per tube)
250 (25 per tube)
1000 (50 per tube)
Qxx25K6TP
Qxx25L5TP
Qxx25K6
Qxx25L5
Tube
Tube
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
Thyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
0.059
(1.5)
DIA
MT1 / Cathode
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
MT2 / Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
ꢀꢁ 2ꢂ
Part Marking System
TO-22ꢇ Aꢉ - (L anꢊ R Pacꢂaꢃe)
TO-2ꢆꢋ Aꢉ - (N Pacꢂaꢃe)
TO-21ꢀAC - (ꢁ Pacꢂaꢃe)
TO-21ꢀꢄ - (ꢅ Pacꢂaꢃe)
Q
N
ꢃꢀ
SENSITIꢄITY
Standard Triac
5: 50mA
Alternistor
H5: 50mA
6: 80mA
COMPONENT TYPE
Q: Triac or Alternistor
Qꢆꢇ2ꢈRꢈ
YMꢄꢄꢄ
Qꢆꢇ2ꢈꢁꢆ
ꢄOLTAꢅE RATINꢅ
40: 400V
60: 600V
80: 800V
K0: 1000V
®
H6: 80mA
YMLXX
®
PACꢆAꢅE TYPE
L
: TO-220AB Isolated
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
R
N
K
J
: TO-220AB Non-Isolated
: TO-263 (D2 -Pak)
CURRENT RATINꢅ
25: 25A
: TO-218AC Isolated
: TO-218X Isolated
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
XX: Lot Serial Code
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.
©2019 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: BO.12/10/20
相关型号：
Q8025NH6RP
Alternistor TRIAC, 800V V(DRM), 25A I(T)RMS, TO-263AB, ROHS COMPLIANT, TO-263, D2PAK-3
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明