QXX16RH4 [LITTELFUSE]
15 Amp and 16 Amp bi-directional solid state switch series is designed for AC; 15安培和16安培双向固态开关系列是专为AC型号: | QXX16RH4 |
厂家: | LITTELFUSE |
描述: | 15 Amp and 16 Amp bi-directional solid state switch series is designed for AC |
文件: | 总9页 (文件大小:946K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series
®
Description
15 Amp and 16 Amp bi-directional solid state switch series
is designed for AC switching and phase control applications
such as motor speed and temperature modulation controls,
lighting controls, and static switching relays.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Alternistor type devices only operate in quadrants I, II, & III
and are used in circuits requiring high dv/dt capability.
Features & Benefits
• RoHS Compliant
contact bounce that
create voltage transients
• Glass – passivated
junctions
Agency Approval
• No contacts to wear
out from reaction of
switching events
• Voltage capability up to
1000 V
Agency
Agency File Number
L Package : E71639
®
• Restricted (or limited) RFI
generation, depending
on activation point in sine
wave
• Surge capability up to
200 A
• Electrically isolated
“L-Package” is UL
recognized for 2500Vrms
Main Features
• Requires only a small
gate activation pulse in
each half-cycle
Symbol
IT(RMS)
Value
15 & 16
Unit
A
• Solid-state switching
eliminates arcing or
VDRM/VRRM
IGT (Q1)
400 to 1000
10 to 80
V
mA
Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Schematic Symbol
Typical applications are AC solid-state switches, light
dimmers, power tools, lawn care equipment, home/brown
goods and white goods appliances.
MT2
MT1
AlternistorTriacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
G
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
107
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Absolute Maximum Ratings — StandardTriac
Symbol
IT(RMS)
Parameter
RMS on-state current (full sine wave)
Value
Unit
Qxx15Ly
TC = 80°C
15
A
Qxx15Ry
Qxx15Ny
TC = 90°C
f = 50 Hz
f = 60 Hz
t = 20 ms
t = 16.7 ms
tp = 8.3 ms
TJ = 125°C
167
200
166
100
Non repetitive surge peak on-state current
ITSM
A
(full cycle, TJ initial = 25°C)
I2t
I2t Value for fusing
A2s
di/dt
Critical rate of rise of on-state current
f = 120 Hz
A/μs
tp ≤ 10 μs
IGTM
Peak gate trigger current
2.0
A
TJ = 125°C
TJ = 125°C
IGT ≤ IGTM
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
0.5
W
ºC
ºC
-40 to 150
-40 to 125
Operating junction temperature range
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — AlternistorTriac (3 Quadrants)
Symbol
IT(RMS)
Parameter
RMS on-state current (full sine wave)
Value
Unit
Qxx16LHy
TC = 80°C
16
A
Qxx16RHy
Qxx16NHy
TC = 90°C
f = 50 Hz
f = 60 Hz
t = 20 ms
t = 16.7 ms
tp = 8.3 ms
TJ = 125°C
167
200
166
100
Non repetitive surge peak on-state current
ITSM
A
(full cycle, TJ initial = 25°C)
I2t
I2t Value for fusing
A2s
di/dt
Critical rate of rise of on-state current
f = 120 Hz
A/μs
tp ≤ 10 μs;
IGTM
Peak gate trigger current
2.0
A
TJ = 125°C
TJ = 125°C
I
GT ≤ IGTM
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
0.5
W
ºC
ºC
-40 to 150
-40 to 125
Operating junction temperature range
Note: xx = voltage, y = sensitivity
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — StandardTriac
Symbol
IGT
Test Conditions
Quadrant
Value
Unit
I – II – III
I – II – III
I – II – III
MAX.
50
2.0
0.2
70
mA
V
VD = 12V RL = 60 Ω
VGT
VGD
IH
MAX.
MIN.
MAX.
VD = VDRM RL = 3.3 kΩ TJ = 125°C
V
IT = 100mA
mA
400V
600V
800V
1000V
275
225
200
200
4
VD = VDRM Gate Open TJ = 125°C
dv/dt
MIN.
V/μs
VD = VDRM Gate Open TJ = 100°C
(di/dt)c = 8.1 A/ms TJ = 125°C
(dv/dt)c
tgt
MIN.
V/μs
μs
IG = 2 x IGT PW = 15μs IT = 22.6 A(pk)
TYP.
4
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
108
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — AlternistorTriac (3 Quadrants)
Symbol
Test Conditions
VD = 12V RL = 60 Ω
Quadrant
I – II – III
Qxx16xH2
Qxx16xH3
Qxx16xH4
Qxx16xH6
Unit
IGT
MAX.
MAX.
MIN.
MAX.
10
20
35
80
mA
VGT
VGD
IH
I – II – III
I – II – III
1.3
V
V
VD = VDRM RL = 3.3 kΩ TJ = 125°C
0.2
IT = 100mA
15
35
50
70
mA
400V
600V
800V
200
150
100
350
250
200
475
400
350
925
850
475
VD = VDRM Gate Open TJ = 125°C
dv/dt
MIN.
V/μs
VD = VDRM Gate Open TJ = 100°C
(di/dt)c = 8.6 A/ms TJ = 125°C
1000V
100
2
200
20
3
300
25
3
350
30
5
(dv/dt)c
tgt
MIN.
V/μs
μs
IG = 2 x IGT PW = 15μs IT = 22.6 A(pk)
TYP.
3
Static Characteristics
Symbol
Test Conditions
Value
Unit
15A Device IT = 21.2A tp = 380μs
16A Device IT = 22.6A tp = 380μs
VTM
MAX
1.60
V
TJ = 25°C
TJ = 125°C
TJ = 100°C
400-1000V
5
2
3
μA
IDRM
IRRM
VD = VDRM / VRRM
400-800V
1000V
MAX
mA
Thermal Resistances
Symbol
Parameter
Value
Unit
Qxx15Ry
Qxx15Ny
Qxx16RHy
Qxx16NHy
1.1
Junction to case (AC)
°C/W
°C/W
Rθ(J-C)
Qxx15Ly
Qxx16LHy
Qxx15Ry
Qxx16RHy
Qxx15Ly
2.1
45
50
Junction to ambient
Rθ(J-A)
Qxx16LHy
Note: xx = voltage; y = sensitivity
Figure 2: Normalized DC GateTrigger Current for All
Quadrants vs. JunctionTemperature
Figure 1: Definition of Quadrants
ALL POLARITIES ARE REFERENCED TO MT1
4.0
3.0
2.0
1.0
0.0
MT2 POSITIVE
(Positive Half Cycle)
+
MT2
MT2
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
MT1
REF
MT2
REF
MT2
QII QI
QIII QIV
I
-
+ I
GT
GT
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
REF
+125
100
MT1
REF
-65
-40
-15
10
35
60
85
-
Junction Temperature (TJ) - ºC
MT2 NEGATIVE
(Negative Half Cycle)
Note: Alternistors will not operate in QIV
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
109
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: Normalized DC GateTriggerVoltage for
All Quadrants vs. JunctionTemperature
4.0
3.0
2.0
1.0
0.0
2.0
1.5
1.0
0.5
0.0
+125
+125
-65
-40
-15
10
35
60
85
100
-65
-40
-15
10
35
60
85
100
Junction Temperature (TJ) - ºC
Junction Temperature (TJ) - ºC
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. On-State Current (15A devices)
130
120
18
16
14
12
10
8
110
Qxx15R5
Qxx15N5
100
90
80
70
60
Qxx15L5
6
CURRENT WAVEFORM: Sinusoidal
4
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
CASE TEMPERATURE: Measured as shown
on dimensional drawing
2
0
0
2
4
6
8
10
12
14
16
18
0
5
10
15
RMS On-State Current [IT(RMS)] - AMPS
RMS On-State Current [IT(RMS)] - AMPS
Figure 7: Maximum Allowable CaseTemperature
vs. On-State Current (16A devices)
Figure 8: Maximum Allowable AmbientTemperature
vs. On-State Current
120
110
130
120
Qxx15Ry
Qxx15L
Qxx16RHy
Qxx16LHy
100
Qxx16RHy
Qxx16NHy
110
90
80
70
60
100
Qxx16LHy
90
50
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
CASETEMPERATURE: Measured as shown
on dimensional drawing
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
CASETEMPERATURE: Measured as shown
80
40
70
60
on dimensional drawing
30
20
0
5
10
15
20
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
RMS On-State Current [IT(RMS)] - AMPS
RMS On-State Current [IT(RMS)] - AMPS
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
110
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Figure 9: On-State Current vs. On-StateVoltage (Typical)
70
TJ = 25ºC
60
50
40
30
20
10
0
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Positive or Negative Instantaneous On-State Voltage (vT) - Volts
Figure 10: Surge Peak On-State Current vs. Number of Cycles
1000
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State [IT(RMS)]: Max Rated Value at
Specific Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
10
1
10
100
1000
Surge Current Duration - Full Cycles
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
Pre Heat -Temperature Max (Ts(max)
)
200°C
TL
TS(max)
-Time (min to max) (ts)
60 – 180 secs
tL
Average ramp up rate (LiquidusTemp)
(TL) to peak
Ramp-down
Preheat
5°C/second max
TS(min)
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
tS
-Temperature (TL) (Liquidus)
Reflow
-Temperature (tL)
60 – 150 seconds
260+0/5°C
25
time to peak temperature
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
111
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell time
Temperature Cycling
Terminal Material
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell
time at each temperature; 10 sec (max)
transfer time between temperature
Thermal Shock
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
Dimension
O
8.13
.320
Min
Max
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
A
E
P
MT2
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
9.65
2.66
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7.01
.276
F
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
G
H
J
R
G
L
H
K
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
K
N
J
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
MT1 MT2
GATE
R
0.97
1.22
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
112
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
TC MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
Dimension
O
8.13
.320
Min
Max
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.60
0.89
5.21
2.67
1.91
A
E
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7.01
.276
F
F
G
H
J
R
G
L
H
K
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
J
MT1 MT2
M
GATE
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO-263AB (N-Package) — D2Pak Surface Mount
TC MEASURING POINT
AREA: 0.11 IN2
Inches
Millimeters
C
B
V
Dimension
E
MT2
Min
Max
Min
9.14
9.65
4.52
0.64
1.14
Max
9.40
10.67
4.78
0.89
1.52
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
8.41
.331
7.01
.276
A
S
W
U
J
K
GATE
MT1
8.13
.320
G
H
D
F
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
1.91
G
H
J
2.67
2.59
0.61
2.79
15.88
1.14
1168
.460
2.16
.085
7.01
.276
7.01
.276
K
16.89
.665
S
8.89
.350
1.40
.055
V
3.81
.150
U
W
0.25
1.78
2.03
.080
6.60
.260
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
113
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Product Selector
Voltage
Gate Sensitivity Quadrants
Part Number
Type
Package
400V 600V 800V 1000V
I – II – III
50 mA
50 mA
50 mA
10 mA
10 mA
10 mA
20 mA
20 mA
20 mA
35 mA
35 mA
35 mA
80 mA
80 mA
80 mA
Qxx15L5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
StandardTriac
StandardTriac
StandardTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
TO-220L
TO-220R
Qxx15R5
Qxx15N5
TO-263 D²-PAK
TO-220L
Qxx16LH2
Qxx16RH2
Qxx16NH2
Qxx16LH3
Qxx16RH3
Qxx16NH3
Qxx16LH4
Qxx16RH4
Qxx16NH4
Qxx16LH6
Qxx16RH6
Qxx16NH6
TO-220R
TO-263 D²-PAK
TO-220L
TO-220R
TO-263 D²-PAK
TO-220L
TO-220R
TO-263 D²-PAK
TO-220L
TO-220R
TO-263 D²-PAK
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Qxx15L/Ry
Qxx15L/RyTP
Qxx15NyTP
Qxx15NyRP
Qxx16L/RHy
Qxx16L/RHyTP
Qxx16NHyTP
Qxx16NHyRP
Note: xx = Voltage; y = Sensitivity
Qxx15L/Ry
Qxx15L/Ry
Qxx15Ny
2.2 g
2.2 g
1.6 g
1.6 g
2.2 g
2.2 g
1.6 g
1.6 g
Bulk
Tube Pack
Tube
500
500 (50 per tube)
500 (50 per tube)
500
Qxx15Ny
Embossed Carrier
Bulk
Tube Pack
Tube
Embossed Carrier
Qxx16L/RHy
Qxx16L/RHy
Qxx16NHy
Qxx16NHy
500
500 (50 per tube)
500 (50 per tube)
500
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
114
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
TO-263 Embossed Carrier Reel Pack (RP)
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
MT1
0.059
(1.5)
DIA
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
MT2
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
Q 60 16 L H4 56
Part Marking System
LEAD FORM DIMENSIONS
xx: Lead Form Option
DEVICE TYPE
Q: Triac or Alternistor
SENSITIVITY & TYPE
Standard Triac
VOLTAGE RATING
40: 400V
60: 600V
5: 50mA (QI, II, III)
80: 800V
Alternistor Triac
K0: 1000V
H2: 10mA (QI, II, III)
H3: 20mA (QI, II, III)
H4: 35mA (QI, II, III)
H6: 80mA (QI, II, III)
CURRENT RATING
15: 15A
16: 16A
Q6016RH4
M
Y
PACKAGE TYPE
®
L: TO-220 Isolated
R: TO-220 Non-Isolated
N: TO-263 (D2-Pak)
Qxx15xx & Qxx16xHx Series
©2010 Littelfuse, Inc
115
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
相关型号:
©2020 ICPDF网 联系我们和版权申明