QXX25NH5RP [LITTELFUSE]
25 Amp bi-directional solid state switch series is designed for AC switching; 25安培双向固态开关系列是专为AC开关型号: | QXX25NH5RP |
厂家: | LITTELFUSE |
描述: | 25 Amp bi-directional solid state switch series is designed for AC switching |
文件: | 总11页 (文件大小:273K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
tꢀ7PMUBHFꢀDBQBCJMJUZꢀVQꢀ
to 1000 V
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Qxx25xx & Qxx25xHx Series
®
Description
25 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Alternistor type devices only operate in quadrants I, II, & III
and are used in circuits requiring high dv/dt capability.
Features & Benefits
tꢀ
tꢀ
3P)4ꢀDPNQMJBOU
tꢀ
4VSHFꢀDBQBCJMJUZꢀVQꢀ
to 250 A
(MBTTꢀoꢀQBTTJWBUFEꢀ
junctions
Agency Approval
Agency
Agency File Number
TO-220L, TO-218K, TO-218J &
Fastpak Packages: E71639
®
Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Main Features
Typical applications are AC solid-state switches, industrial
power tools, exercise equipment, white goods and
commercial appliances.
Symbol
IT(RMS)
Value
25
Unit
A
V
AlternistorTriacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
VDRM/VRRM
IGT
1000
50 to 80
mA
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
MT2
MT1
G
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
117
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Absolute Maximum Ratings – StandardTriac
Symbol
Parameter
Test Conditions
TC = 85°C
Value
Unit
Qxx25R5
Qxx25N5
IT(RMS)
RMS on-state current
25
A
Qxx25P5
TC = 57°C
single half cycle; f = 50Hz;
167
200
220
250
166
T (initial) = 25°C
Qxx25R5
Qxx25N5
J
single half cycle; f = 60Hz;
T (initial) = 25°C
J
ITSM
Peak non-repetitive surge current
A
single half cycle; f = 50Hz;
T (initial) = 25°C
J
Qxx25P5
single half cycle; f = 60Hz;
T (initial) = 25°C
J
Qxx25R5
Qxx25N5
I2t
I2t Value for fusing
tp = 8.3ms
A2s
Qxx25P5
260
100
di/dt
IGTM
Critical rate-of-rise of on-state current
Peak gate current
f = 60Hz;T =125°C
A/μs
A
J
2
T = 125°C
J
PG(AV)
Tstg
Average gate power dissipation
Storage temperature range
0.5
W
T = 125°C
J
-40 to 125
°C
Qxx25R5
Qxx25N5
-40 to 125
-25 to 125
T
Operating junction temperature range
°C
J
Qxx25P5
Absolute Maximum Ratings – AlternistorTriac
Symbol
Parameter
Test Conditions
Value
Unit
Qxx25LH5
Qxx25L6
TC = 65°C
Qxx25K6
Qxx25J6
TC = 85°C
TC = 95°C
IT(RMS)
RMS on-state current
25
A
Qxx25RH5
Qxx25NH5
Qxx25R6
Qxx25NH6
single half cycle; f = 50Hz;
208
250
T (initial) = 25°C
J
ITSM
Peak non-repetitive surge current
A
single half cycle; f = 60Hz;
T (initial) = 25°C
J
I2t
I2t Value for fusing
Critical rate-of-rise of on-state current
Peak gate current
tp = 8.3ms
260
100
A2s
A/μs
A
di/dt
IGTM
PG(AV)
Tstg
f = 60Hz;T =125°C
J
T = 125°C
2
J
Average gate power dissipation
Storage temperature range
T = 125°C
0.5
W
J
-40 to 125
-40 to 125
°C
T
Operating junction temperature range
°C
J
Note: xx = voltage
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
118
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Electrical Characteristics (T = 25°C, unless otherwise specified) — StandardTriac
J
Value
Symbol
Test Conditions
Quadrant
I – II – III
Unit
Qxx25R5
Qxx25P5
Qxx25N5
MAX.
TYP.
50
120
1.3
IGT
mA
V
IV
I – II – III
IV
VD = 12V; RL = 60 8
MAX.
TYP.
VGT
2.5
0.2
VGD
IH
VD = VDRM; RL = 3.3 k8 ; T = 125°C
ALL
MIN.
MAX.
V
J
IT = 400mA (initial)
100
50
mA
400V
600V
800V
1000V
275
225
200
200
—
475
400
—
VD = VDRM; Gate Open; T = 125°C
J
dv/dt
MIN.
V/μs
VD = VDRM; Gate Open; T = 100°C
J
(dv/dt)c
tgt
(di/dt)c = 13.3 A/ms; T = 125°C
MIN.
TYP.
5
V/μs
μs
J
IG = 2 x IGT; PW = 15ꢀs; IT = 35.4 A
4
3
Electrical Characteristics (T = 25°C, unless otherwise specified) — AlternistorTriac
J
Value
Qxx25R6
Qxx25L6
Qxx25NH6
Qxx25K6
Qxx25J6
Qxx25RH5
Qxx25LH5
Qxx25NH5
Symbol
Test Conditions
Quadrant
Unit
IGT
I – II – III
MAX.
MAX.
MIN.
MAX.
50
80
mA
V
VD = 12V; RL = 60 8
VGT
VGD
IH
I – II – III
I – II – III
1.3
0.2
VD = VDRM; RL = 3.3 k8 ; T = 125°C
V
J
IT = 400mA (initial)
50
100
mA
400V
600V
800V
1000V
575
500
400
—
600
600
475
400
VD = VDRM; Gate Open; T = 125°C
J
dv/dt
MIN.
V/μs
VD = VDRM; Gate Open; T = 100°C
J
(dv/dt)c
tgt
(di/dt)c = 13.3 A/ms; T = 125°C
MIN.
TYP.
20
3
30
5
V/μs
μs
J
IG = 2 x IGT; PW = 15ꢀs; IT = 35.4 A
Static Characteristics
Value
Qxx25R5
Qxx25N5
Qxx25xH5
Qxx25x6
Symbol
Test Conditions
Unit
Qxx25P5
Qxx25NH6
VTM
IT = 35.4A; tp = 380 μs
MAX.
1.8
10
1.4
100
—
V
600 – 800V
1000V
T = 25°C
J
20
IDRM / IRRM
VDRM / VRRM
MAX.
μA
600 – 800V
1000V
500
1000
2000
—
T = 100°C
J
—
T = 125°C
600 – 800V
5000
J
Note: xx = voltage, x = package
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
119
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Thermal Resistances
Symbol
Parameter
Value
Unit
Qxx25R5 / Qxx25N5
Qxx25R6 / Qxx25NH6
Qxx25RH5 / Qxx25NH5
0.89
Qxx25P5
1.6
2.0
1.32
45
Junction to case (AC)
Junction to ambient
°C/W
RR(J-C)
Qxx25L6 / Qxx25LH5
Qxx25K6 / Qxx25J6
Qxx25Ry
°C/W
RR(J-A)
Qxx25L6 / Qxx25LH5
50
Note: xx = voltage, y = sensitivity
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
2.5
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
125
-40
-15
10
35
60
85
110
Junction Temperature (TJ) -- (ºC)
Junction Temperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
2.0
1.5
1.0
0.5
0.0
90
TJ = 25°C
80
70
60
50
40
30
20
10
0
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
Qxx25R5
Qxx25N5
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
-40
-15
10
35
60
85
110
125
Instantaneous On-state Voltage (vT) – Volts
Junction Temperature (TJ) -- (ºC)
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
120
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Figure 5: Power Dissipation (Typical) vs. RMS
Figure 6: Maximum Allowable CaseTemperature
On-State Current
vs. RMS On-State Current
130
120
110
100
90
35
30
25
20
15
10
5
Qxx25R6
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
Qxx25NH6
Qxx25RH5
Qxx25NH5
Qxx25R5
Qxx25N5
Qxx25K6
Qxx25J6
Qxx25R5
Qxx25N5
Qxx25L6
Qxx25LH5
80
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
Qxx25P5
70
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
60
0
50
0
5
10
15
20
25
0
5
10
15
20
25
30
RMS On-State Current [IT(RMS)] -- Amps
RMS On-State Current [IT(RMS)] - Amps
Figure 7: Maximum Allowable AmbientTemperature vs. RMS On-State Current (TO-220 packages only)
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
100
FREE AIR RATING
80
60
40
20
0
0.0
0.5
1.0
1.5
2.0
2.5
RMS On-State Current [IT(RMS)] -- Amps
Figure 8: Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated Value at
Specified Case Temperature
Qxx25P5/Qxx25R6
Qxx25L6/Qxx25NH6
Qxx25K6/Qxx25J6
Qxx25RH5/Qxx25LH5
Qxx25NH5
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
Qxx25R5
Qxx25N5
10
1
10
100
1000
Surge Current Duration -- Full Cycles
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
121
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Soldering Parameters
Reflow Condition
-Temperature Min (Ts(min)
Pb – Free assembly
tP
TP
)
150°C
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
-Time (min to max) (ts)
)
200°C
tL
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
-Temperature (TL) (Liquidus) 217°C
25
Reflow
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Test
Specifications and Conditions
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated
HighTemperature
Voltage Blocking
MIL-STD-750: Method 1040, Condition A
Rated VRRM, 125°C, 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750: Method 1051
-40°C to 125°C, 15-minute dwell,
100 cycles
Temperature Cycling
Copper Alloy
BiasedTemp &
Humidity
EIA/JEDEC: JESD22-A101
320VDC, 85°C, 85%RH, 1008 hours
MIL-STD-750: Method 1031
150°C, 1008 hours
HighTemp. Storage
Low-Temp Storage
Design Considerations
-40°C, 1008 hours
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750: Method 1056
0°C to 100°C, 5-minute dwell,
10-second transfer, 10 cycles
Thermal Shock
Autoclave
EIA/JEDEC: JESD22-A102
(Pressure CookerTest) 121°C, 100%RH, 2atm, 168 hours
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability
Lead Bend
ANSI/J-STD-002, Category 3, Test A
MIL-STD-750: Method 2036, Condition E
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
122
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions —TO-220AB (R Package) — Non-isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
Ø
E
P
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
MT2
B
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
R
G
G
H
J
L
H
K
N
K
J
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
MT1 MT2
GATE
L
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO-220AB (L Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Dimension
O
8.13
.320
A
Ø
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Min
9.65
2.66
5.85
14.98
3.61
2.80
13.71
0.63
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.60
0.89
5.21
2.67
1.91
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
B
C
13.36
.526
D
7.01
.276
F
F
R
G
G
H
J
L
H
K
N
K
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
MT1 MT2
M
GATE
L
M
N
O
P
1.78
2.16
0.61
4.78
1.53
0.45
4.52
1.14
R
0.97
1.22
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
123
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions —TO-263 (N Package) — D2Pak Surface Mount
T
C MEASURING POINT
AREA: 0.11 IN2
Inches
Millimeters
C
B
V
Dimension
E
MT2
Min
Max
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
Min
Max
9.40
10.67
4.78
0.89
1.52
8.41
.331
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
9.14
9.65
4.52
0.64
1.14
7. 01
.276
A
S
W
U
J
K
GATE
MT1
8.13
.320
G
H
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
1.91
D
F
G
H
J
2.67
2.59
0.61
2.79
15.88
1.14
11.68
.460
2.16
.085
K
7. 01
.276
7. 01
.276
S
16.89
.665
8.89
.350
1.40
.055
V
U
W
0.25
1.78
3.81
.150
2.03
.080
6.60
.260
Dimensions —TO-218AC (K Package) — Isolated MountingTab
TC Measurement Point
U (diameter)
Inches
Millimeters
C
Dimension
B
Min
Max
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.219
0.437
0.068
0.055
0.115
0.016
0.016
0.165
0.095
Min
20.57
15.49
4.52
1.40
Max
21.21
16.00
4.78
1.78
D
A
B
C
D
E
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.211
0.422
0.058
0.045
0.095
0.008
0.008
0.164
0.085
A
F
E
W
Gate
12.37
16.13
0.56
1.91
12.62
16.64
0.74
J
P
F
MT1
MT2
H
M
Q
G
H
J
G
2.41
15.88
5.56
11.10
1.73
R
N
14.61
5.36
10.72
1.47
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
K
K
L
L
M
N
P
1.14
1.40
2.41
0.20
0.20
4.10
2.92
0.41
0.41
4.20
2.42
Q
R
U
W
2.17
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
124
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Dimensions —TO-218X (J Package) — Isolated MountingTab
C
Inches
Millimeters
D
Dimension
B
U (diameter)
Min
Max
Min
Max
A
B
C
D
E
F
G
H
J
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.256
0.220
0.080
0.169
0.034
0.113
0.086
0.156
0.164
0.603
0.000
0.003
0.028
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.264
0.228
0.088
0.177
0.042
0.121
0.096
0.166
0.165
0.618
0.005
0.012
0.032
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
6.50
5.58
2.03
4.29
0.86
2.87
2.18
3.96
0.410
15.31
0.00
0.07
0.71
2.17
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
6.71
5.79
2.24
4.49
1.07
3.07
2.44
4.22
0.420
15.70
0.13
0.30
0.81
2.42
T
c
Measurement
Point
A
F
Z
E
MT1
X
W
J
Gate
R
N
K
L
T
M
S
P
MT2
G
H
M
N
P
R
S
T
U
V
W
X
Y
Z
Y
K
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
V
Dimensions —TO-3 (P Package) Fastpak — Isolated MountingTab
A
Inches
Millimeters
Dimension
B
Min
Max
Min
Max
D
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
1.531
1.177
0.843
0.780
0.783
0.874
0.161
0.386
0.508
0.079
0.047
0.307
0.372
0.043
0.315
0.098
0.846
0.244
0.106
0.321
0.321
0.220
0.246
0.246
0.183
0.120
0.175
1.543
1.185
0.850
0.795
0.791
0.906
0.169
0.465
0.587
0.087
0.055
0.319
0.396
0.059
0.331
0.106
0.886
0.256
0.130
0.329
0.329
0.228
0.254
0.254
0.191
0.130
0.185
38.90
29.90
21.40
19.80
19.90
22.20
4.10
9.80
12.90
2.00
1.20
39.20
30.10
21.60
20.20
20.10
23.00
4.30
11.80
14.90
2.20
1.40
MT2
H
F
MT1
Gate
ꢀ G
E
C
TC MeasuringPoint
I
T
ꢀ J (MT1, MT2)
U
7.80
9.45
1.10
8.10
10.05
1.50
V
W
R
L
M
ꢀ K (Gate)
Q
8.00
2.50
21.50
6.20
2.70
8.15
8.15
5.60
6.25
6.25
4.65
3.05
4.45
8.40
2.70
22.50
6.50
3.30
8.35
8.35
5.80
6.45
6.45
4.85
3.30
4.70
5 - ꢀ N
S
O
P
R
S
Thickness off all three copper-alloy terminals is .032" (0.81 mm).
T (MT1)
T (MT2)
T (Gate)
U (MT1)
U (MT2)
U (Gate)
V
W
Maximum torque to be applied to mounting tab is 8 in-lbs (0.904Nm).
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
125
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
Product Selector
Voltage
Gate Sensitivity Quadrants
Part Number
Package
400V
600V
800V
X
1000V
I - II - III
50 mA
50 mA
50 mA
50 mA
50 mA
50 mA
80 mA
80 mA
80 mA
80 mA
80 mA
IV
Qxx25R5
Qxx25N5
Qxx25P5
Qxx25RH5
Qxx25LH5
Qxx25NH5
Qxx25R6
Qxx25L6
Qxx25NH6
Qxx25J6
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
120 mA (TYP)
120 mA (TYP)
120 mA (TYP)
TO-220R
TO-263 D2-Pak
Fastpak
X
X
X
X
X
X
X
X
X
X
X
TO-220R
X
TO-220L
TO-263 D2-Pak
X
X
X
X
X
TO-220R
X
TO-220L
TO-263 D2-Pak
X
X
TO-218X
Qxx25K6
X
X
TO-218AC
Packing Options
Part Number
Qxx25R5
Marking
Weight
Packing Mode
Base Quantity
Qxx25R5
Qxx25R5
Qxx25N5
Qxx25N5
2.20g
2.20g
1.60g
1.60g
2.20g
2.20g
2.20g
2.20g
1.60g
1.60g
21.4g
2.20g
2.20g
2.20g
2.20g
1.60g
1.60g
5.23g
4.40g
Bulk
500
500 (50 per tube)
500 (50 per tube)
500
Qxx25R5TP
Qxx25N5TP
Qxx25N5RP
Qxx25RH5
Qxx25RH5TP
Qxx25LH5
Tube
Tube
Embossed Carrier
Qxx25RH5
Qxx25RH5
Qxx25LH5
Qxx25LH5
Qxx25NH5
Qxx25NH5
Qxx25P5
Bulk
500
Tube
500 (50 per tube)
500
Bulk
Qxx25LH5TP
Qxx25NH5TP
Qxx25NH5RP
Qxx25P5
Tube
500 (50 per tube)
500 (50 per tube)
500
Tube
Embossed Carrier
Bulk
Bulk
200
Qxx25R6
Qxx25R6
Qxx25R6
Qxx25L6
500
Qxx25R6TP
Qxx25L6
Tube
500 (50 per tube)
500
Bulk
Qxx25L6TP
Qxx25NH6TP
Qxx25NH6RP
Qxx25J6TP
Qxx25K6TP
Qxx25L6
Tube
500 (50 per tube)
500 (50 per tube)
500
Qxx25NH6
Qxx25NH6
Qxx25J6
Tube
Embossed Carrier
Tube
250 (25 per tube)
250 (25 per tube)
Qxx25K6
Tube
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
126
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised: May 10, 2010 09:33 PM
Teccor® brandThyristors
25 Amp Standard & Alternistor (High Commutation) Triacs
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
0.059
(1.5)
DIA
MT1 / Cathode
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
MT2 / Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
Part Marking System
Q 60 25 N H6
TO-220AB (R & L Packages)
TO-263 (N Package)
TO-218AC (K Package)
TO-218X (J Package)
SENSITIVITY
DEVICE TYPE
Q: Triac or Alternistor
Standard Triac
5: 50mA
Alternistor
H5: 50mA
6: 80mA
Q6025K6
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
Q6025L5
H6: 80mA
yxxxx
®
PACKAGE TYPE
yxxxx
®
L
: TO-220AB Isolated
R
N
K
J
: TO-220AB Non-Isolated
: TO-263 (D2 -Pak)
: TO-218AC Isolated
: TO-218X Isolated
: Fastpak
CURRENT RATING
25: 25A
P
Fastpak (P Package)
Q6025P5
yxxxx
®
Qxx25xx & Qxx25xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
127
Revised: May 10, 2010 09:33 PM
相关型号:
©2020 ICPDF网 联系我们和版权申明