S6055N56TP [LITTELFUSE]
Silicon Controlled Rectifier, 55A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3;型号: | S6055N56TP |
厂家: | LITTELFUSE |
描述: | Silicon Controlled Rectifier, 55A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3 栅 栅极 |
文件: | 总9页 (文件大小:826K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Teccor® brandThyristors
55 Amp Standard SCRs
Sxx55x Series
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
• RoHS compliant
• Voltage capability up
to 1000 V
• Glass – passivated
junctions
• Surge capability up to
650 A
Applications
Main Features
Typical applications are AC solid-state switches, industrial
power tools, exercise equipment, white goods and
commercial appliances.
Symbol
Value
55
Unit
A
IT(RMS)
VDRM/VRRM
IGT
400 to 1000
40
V
Schematic Symbol
mA
A
K
G
Absolute Maximum Ratings
Symbol
Parameter
Test Conditions
Value
Unit
IT(RMS)
IT(AV)
RMS on-state current
TC = 90°C
55
A
Average on-state current
TC = 90°C
35.0
A
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
550
650
ITSM
Peak non-repetitive surge current
single half cycle; f = 60Hz;
TJ (initial) = 25°C
I2t
I2t Value for fusing
tp = 8.3 ms
1750
175
A2s
di/dt
Critical rate of rise of on-state current
A/μs
f = 60Hz ;TJ = 125°C
TJ = 125°C
PW = 10µS
IGM
Peak gate current
4.0
A
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
0.8
W
°C
°C
TJ = 125°C
-40 to 150
-40 to 125
Operating junction temperature range
Sxx55x Series
©2011 Littelfuse, Inc
295
Revised: June 24, 2011 04:57 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
55 Amp Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol Test Conditions
Value
40
Unit
mA
V
MAX.
MIN.
MAX.
IGT
VD = 12V; RL = 30 Ω
5
VGT
1.5
650
600
500
250
550
500
475
0.2
60
400V
600V
800V
1000V
400V
600V
800V
VD = VDRM; gate open;TJ = 100°C
VD = VDRM; gate open;TJ = 125°C
dv/dt
MIN.
V/μs
VGD
IH
VD = VDRM; RL = 3.3 kΩ; TJ = 125°C
IT = 400mA (initial)
MIN.
MAX.
MAX.
TYP.
V
mA
μs
tq
(1)
35
tgt
IG = 2 x IGT; PW = 15µs; IT = 110A
2.5
μs
Note :
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Static Characteristics
Symbol
Test Conditions
IT = 110A; tp = 380μs
Value
1.8
Unit
VTM
MAX.
V
400 – 600V
800 V
10
20
TJ = 25°C
1000 V
30
400 – 600V
800V
1000
1500
5000
2000
3000
IDRM / IRRM
VDRM / VRRM
MAX.
μA
TJ = 100°C
TJ = 125°C
1000V
400 – 600V
800V
Thermal Resistances
Symbol
Parameter
Value
Unit
Sxx55R
Sxx55N
Sxx55W
Sxx55M
0.5
Junction to case (AC)
Junction to ambient
°C/W
°C/W
Rθ(J-C)
0.53
40
Sxx55R
Rθ(J-A)
Note: xx = voltage
Sxx55x Series
©2011 Littelfuse, Inc
296
Revised: June 24, 2011 04:57 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
55 Amp Standard SCRs
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
-40
-15
10
35
60
85
110
125
1.6
60
JunctionTemperature (TJ) -- (°C)
JunctionTemperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: On-State Current vs. On-StateVoltage
(Typical)
2.0
1.5
1.0
0.5
0.0
120
TJ = 25°C
100
80
60
40
20
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
125
-40
-15
10
35
60
85
110
Instantaneous On-stateVoltage (vT) –Volts
JunctionTemperature (TJ) -- (°C)
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. RMS On-State Current
130
60
50
40
30
20
10
0
The "R" or "M" package rating is intended
for high surge condition use only and not
recommended for >50A rms continuous
current use since narrow pin leads depend-
ing on lead length can exceed PCB solder
melting temperature. "W" package is
recommended for >50A rms continuous
current requirements.
125
120
115
110
105
100
95
90
85
80
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
75
0
5
10
15
20
25
30
35
40
45
50
55
70
0
5
10
15
20
25
30
35
40
45
50
55
RMS On-State Current [IT(RMS)] - (Amps)
RMS On-State Current [IT(RMS)] - Amps
Note: xx = voltage
Sxx55x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
297
Revised: June 24, 2011 04:57 PM
Teccor® brandThyristors
55 Amp Standard SCRs
Figure 7: Maximum Allowable CaseTemperature
vs. Average On-State Current
Figure 8: Maximum Allowable AmbientTemperature
vs. RMS On-State Current
130
125
120
115
110
105
100
95
120
The "R" or "M" package rating is intended for high
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
surge condition use only and not recommended
for >32A (AV) continuous current use since narrow
pin leads depending on lead length can exceed
PCB solder melting temperature. "W" package is
recommended for >32A (AV) continuous current
requirements.
100
FREE AIR RATING
80
60
40
20
0
90
85
80
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
75
70
0.0
0.5
1.0
1.5
2.0
2.5
0
5
10
15
20
25
30
35
40
RMS On-State Current [IT(RMS)] - Amps
Average On-State Current [IT(AVE)] - Amps
Figure 9: Maximum Allowable AmbientTemperature
vs. Average On-State Current
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
100
80
60
40
20
0
0.0
0.5
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
Figure 10: Peak Capacitor Discharge Current
Figure 11: Peak Capacitor Discharge Current Derating
10000
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1000
ITRM
tW
100
0.5
1.0
10.0
50.0
0
25
50
75
100
125
150
CaseTemperature (TC) - °C
Pulse Current Duration (tw) - ms
Note: xx = voltage
Sxx55x Series
©2011 Littelfuse, Inc
298
Revised: June 24, 2011 04:57 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
55 Amp Standard SCRs
Figure 12: Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
10
1
10
100
1000
Surge Current Duration -- Full Cycles
Soldering Parameters
tP
Reflow Condition
Pb – Free assembly
150°C
TP
-Temperature Min (Ts(min)
)
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Sxx55x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
299
Revised: June 24, 2011 04:57 PM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
55 Amp Standard SCRs
Physical Specifications
Environmental Specifications
Test
Specifications and Conditions
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
AC Blocking
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
Temperature Cycling 100 cycles; -40°C to +150°C;
15-min dwell-time
Copper Alloy
EIA / JEDEC, JESD22-A101
Temperature/
1008 hours; 320V - DC: 85°C;
Humidity
85% rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Design Considerations
Low-Temp Storage
Thermal Shock
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime
at each temperature; 10 sec (max) transfer
time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Autoclave
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
ANODE
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Sxx55x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
300
Revised: June 24, 2011 04:57 PM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
55 Amp Standard SCRs
Dimensions –TO-263AB (N-package) — D2-Pak Surface Mount
TC MEASURING POINT
2
Inches
Millimeters
Min
AREA: 0.11 in
C
B
V
Dimension
E
ANODE
Min
Max
0.370
0.420
0.188
0.035
0.055
0.075
0.105
0.093
0.024
0.110
0.625
0.045
0.010
0.070
Max
9.40
10.67
4.78
0.89
1.40
8.41
.331
A
B
C
D
E
0.360
0.380
0.178
0.025
0.048
0.060
0.095
0.083
0.018
0.090
0.590
0.035
0.002
0.040
9.14
9.65
4.52
0.63
1.22
1.52
2.41
2.11
0.46
2.29
14.99
0.89
0.05
1.02
7. 01
.276
A
S
W
U
J
K
GATE
CATHODE
8.13
.320
F
1.91
G
H
D
F
G
H
J
2.67
2.36
0.61
2.79
15.87
1.14
11.68
.460
2.16
.085
K
7. 01
.276
7. 01
.276
S
16.89
.665
V
8.89
.350
1.40
.055
U
W
0.25
1.78
3.81
.150
2.03
.080
6.60
.260
Dimensions –TO-218X (W Package) — Non-Isolated MountingTab Common with Center Lead
C
Inches
Millimeters
Dimension
ANODE
D
B
Min
Max
Min
Max
U (diameter)
A
B
C
D
E
F
G
H
J
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.256
0.220
0.080
0.169
0.034
0.113
0.086
0.156
0.164
0.603
0.000
0.003
0.028
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.264
0.228
0.088
0.177
0.042
0.121
0.096
0.166
0.165
0.618
0.005
0.012
0.032
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
6.50
5.58
2.03
4.29
0.86
2.87
2.18
3.96
4.10
15.31
0.00
0.07
0.71
2.17
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
6.71
5.79
2.24
4.49
1.07
3.07
2.44
4.22
4.20
15.70
0.13
0.30
0.81
2.42
T
c
Measurement
Point
A
F
Z
E
CATHODE
X
W
J
GATE
R
K
L
N
M
N
P
R
S
T
U
V
W
X
Y
Z
T
M
S
P
G
H
ANODE
Y
K
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
V
Sxx55x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
301
Revised: June 24, 2011 04:57 PM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
55 Amp Standard SCRs
Dimensions –TO-218AC (M Package) — Non-isolated MountingTab Common with Center Lead
T
c
Measurement Point
Inches
Millimeters
Dimension
C
B
U (diameter)
ANODE
Min
Max
Min
Max
D
A
B
C
D
E
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.211
0.422
0.058
0.045
0.095
0.008
0.008
0.164
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.219
0.437
0.068
0.055
0.115
0.016
0.016
0.165
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
5.36
10.72
1.47
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
5.56
11.10
1.73
A
F
E
W
F
GATE
J
G
H
J
K
L
M
N
P
Q
R
U
W
P
CATHODE
ANODE
H
M
Q
G
R
N
K
L
1.14
1.40
Note: Maximum torque
to be applied to mounting
tab is 8 in-lbs. (0.904 Nm).
2.41
0.20
0.20
4.10
2.92
0.41
0.41
4.20
2.42
2.17
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
400V
600V
800V
1000V
Sxx55R
Sxx55N
X
X
X
X
X
X
X
X
X
X
X
40mA
40mA
40mA
40mA
Standard SCR
Standard SCR
Standard SCR
Standard SCR
TO-220R
TO-263
X
X
X
Sxx55W
TO-218X
TO-218AC
Sxx55M
X
Note: xx = Voltage
Packing Options
Part Number
Sxx55R
Marking
Weight
Packing Mode
Base Quantity
Sxx55R
Sxx55R
Sxx55N
Sxx55N
Sxx55W
Sxx55M
2.2g
2.2g
1.6g
Bulk
Tube
500
Sxx55RTP
Sxx55NTP
Sxx55NRP
Sxx55WTP
500 (50 per tube)
500 (50 per tube)
500
Tube
1.6g
Embossed Carrier
Tube
5.23g
4.40g
250 (25 per tube)
250 (25 per tube)
Sxx55MTP
Tube
Note: xx = Voltage
Sxx55x Series
©2011 Littelfuse, Inc
302
Revised: June 24, 2011 04:57 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
55 Amp Standard SCRs
TO-263 Embossed Carrier Reel Pack (RP) Specification
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
0.059
(1.5)
DIA
Cathode
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
Part Marking System
TO-218AC - (M Package)
TO-218X - (W Package)
S 6055 R
56
DEVICETYPE
S: SCR
Lead Form Dimensions
xx: Lead Form Option
S6055M
S6055R
SENSITIVITY &TYPE
YM
VOLTAGE RATING
40: 400V
60: 600V
[blank]: 40mA
®
YMLXX
®
80: 800V
K0: 1000V
PACKAGETYPE
CURRENT RATING
55: 55A
R: TO-220 (Non-isolated)
2
N: TO-263 (D
- Pak)
M: TO-218AC (Non-isolated)
W: TO-218X (Non-isolated)
Sxx55x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
303
Revised: June 24, 2011 04:57 PM
Please refer to http://www.littelfuse.com for current information.
相关型号:
S6055NRP
Silicon Controlled Rectifier, 55A I(T)RMS, 35000mA I(T), 600V V(DRM), 600V V(RRM), 1 Element, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3
LITTELFUSE
S6055NTP
Silicon Controlled Rectifier, 55A I(T)RMS, 35000mA I(T), 600V V(DRM), 600V V(RRM), 1 Element, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3
LITTELFUSE
S6055R51V
Silicon Controlled Rectifier, 55A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, TO-220AB, 3 PIN
LITTELFUSE
S6055R52V
Silicon Controlled Rectifier, 55A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, TO-220AB, 3 PIN
LITTELFUSE
S6055R53V
Silicon Controlled Rectifier, 55A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, TO-220AB, 3 PIN
TECCOR
S6055R56TP
Silicon Controlled Rectifier, 55A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
S6055R59V
Silicon Controlled Rectifier, 55A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, TO-220AB, 3 PIN
LITTELFUSE
S6055R67V
Silicon Controlled Rectifier, 55A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-220AB, TO-220AB, 3 PIN
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明