S8065J81TP [LITTELFUSE]
Silicon Controlled Rectifier, 65A I(T)RMS, 800V V(DRM), 800V V(RRM), 1 Element, TO-218, ROHS COMPLIANT, PLASTIC, TO-218X, 3 PIN;型号: | S8065J81TP |
厂家: | LITTELFUSE |
描述: | Silicon Controlled Rectifier, 65A I(T)RMS, 800V V(DRM), 800V V(RRM), 1 Element, TO-218, ROHS COMPLIANT, PLASTIC, TO-218X, 3 PIN 局域网 栅 栅极 |
文件: | 总8页 (文件大小:772K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Teccor® brandThyristors
65 / 70 Amp Standard SCRs
Sxx65x & Sxx70x Series
®
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
• RoHS compliant
• Voltage capability up
to 1000 V
• Glass – passivated
junctions
• Surge capability up to
950 A
Applications
Agency Approval
Typical applications are AC solid-state switches, industrial
power tools, exercise equipment, white goods and
commercial appliances.
Agency
Agency File Number
J & K Packages: E71639
®
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Main Features
Schematic Symbol
Symbol
IT(RMS)
Value
65 & 70
400 to 1000
50
Unit
A
A
K
VDRM/VRRM
IGT
V
mA
G
Absolute Maximum Ratings
Symbol
Parameter
Test Conditions
Value
Unit
Sxx65J
Sxx65K
TC = 75°C
TC = 80°C
TC = 75°C
TC = 80°C
65
70
IT(RMS)
RMS on-state current
A
Sxx70W
Sxx65J
Sxx65K
41.0
45.0
800
A
A
IT(AV)
Average on-state current
Sxx70W
single half cycle; f = 50Hz;
TJ (initial) = 25°C
ITSM
Peak non-repetitive surge current
A
single half cycle; f = 60Hz;
950
TJ (initial) = 25°C
I2t
I2t Value for fusing
tp = 8.3 ms
3745
200
A2s
di/dt
Critical rate of rise of on-state current
A/μs
f = 60Hz ;TJ = 125°C
TJ = 125°C
PW = µS
IGM
Peak gate current
5.0
A
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
1.0
W
°C
°C
TJ = 125°C
-40 to 150
-40 to 125
Operating junction temperature range
Sxx65x & Sxx70x Series
©2011 Littelfuse, Inc
305
Revised: June 21, 2011 04:14 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
65 / 70 Amp Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol Test Conditions
Value
50
Unit
mA
V
MAX.
MIN.
MAX.
IGT
VD = 12V; RL = 30 Ω
5
VGT
2.0
650
600
500
250
550
500
475
0.2
80
400V
600V
800V
1000V
400V
600V
800V
VD = VDRM; gate open;TJ = 100°C
VD = VDRM; gate open;TJ = 125°C
dv/dt
MIN.
V/μs
VGD
IH
VD = VDRM; RL = 3.3 kΩ; TJ = 125°C
IT = 400mA (initial)
MIN.
MAX.
MAX.
TYP.
V
mA
μs
tq
(1)
35
tgt
IG = 2 x IGT; PW = 15µs; IT = 140A
2.5
μs
Note :
(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
Static Characteristics
Symbol
Test Conditions
65A Device IT = 130A; tp = 380μs
70A Device IT = 140A; tp = 380μs
Value
Unit
VTM
MAX.
1.8
V
400 – 800V
1000 V
20
TJ = 25°C
TJ = 100°C
TJ = 125°C
30
400 – 600V
800V
1500
2000
5000
3000
5000
I
DRM / IRRM
VDRM / VRRM
MAX.
μA
1000V
400V – 600V
800V
Thermal Resistances
Symbol
Parameter
Value
Unit
Sxx65J
Sxx65K
0.86
0.6
Junction to case (AC)
°C/W
Rθ(J-C)
Sxx70W
Note: xx = voltage
Sxx65x & Sxx70x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
306
Revised: June 21, 2011 04:14 PM
Teccor® brandThyristors
65 / 70 Amp Standard SCRs
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
-40
-15
10
35
60
85
110
125
JunctionTemperature (TJ) -- (°C)
JunctionTemperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
200
2.0
1.5
1.0
0.5
0.0
TJ = 25°C
180
160
140
120
100
80
60
40
20
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
-40
-15
10
35
60
85
110
125
JunctionTemperature (TJ) -- (°C)
Instantaneous On-stateVoltage (vT) –Volts
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. RMS On-State Current
60
50
40
30
20
10
0
130
The "K" package rating with its narrow leads is intended
for high surge condition use only and not recom-
mended for >50A rms continuous current use since lead
temperature depending on lead length can exceed PCB
solder melting temperature. "J" or "W" packages are
recommended for >50A rms continuous current require-
ments.
125
120
115
110
105
100
95
Sxx70W
Sxx65K
Sxx65J
90
85
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
80
75
70
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
80
RMS On-State Current [IT(RMS)] - Amps
RMS On-State Current [IT(R MS)] - (Am ps)
Note: xx = voltage
Sxx65x & Sxx70x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
307
Revised: June 21, 2011 04:14 PM
Teccor® brandThyristors
65 / 70 Amp Standard SCRs
Figure 7: Maximum Allowable CaseTemperature vs. Average On-State Current
130
The "K" package rating with its narrow leads is
125
120
115
110
105
100
95
intended for high surge condition use only and not
recommended for >32A (AV) continuous current use
since lead temperature depending on lead length can
exceed PCB solder melting temperature. "J" or "W"
packages are recommended for >32A (AV) continu-
ous current requirements.
Sxx70W
Sxx65K
Sxx65J
90
85
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
75
70
0
5
10
15
20
25
30
35
40
45
50
Average On-State Current [IT(AVE)] - Amps
Figure 8: Peak Capacitor Discharge Current
Figure 9: Peak Capacitor Discharge Current Derating
1.2
1.0
0.8
0.6
0.4
0.2
0.0
10000
1000
ITRM
tW
100
0
25
50
75
100
125
150
0.5
1.0
10.0
50.0
Pulse Current Duration (tw) - ms
CaseTemperature (TC) - °C
Figure 10: Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Sxx70W
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
Sxx65K
Sxx65J
100
10
1
10
100
1000
Surge Current Duration -- Full Cycles
Note: xx = Voltage
Sxx65x & Sxx70x Series
©2011 Littelfuse, Inc
308
Revised: June 21, 2011 04:14 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
65 / 70 Amp Standard SCRs
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Test
Specifications and Conditions
Terminal Finish
Body
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
AC Blocking
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
Temperature Cycling 100 cycles; -40°C to +150°C;
15-min dwell-time
Lead Material
Copper Alloy
EIA / JEDEC, JESD22-A101
Temperature/
1008 hours; 320V - DC: 85°C;
Humidity
85% rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Design Considerations
Low-Temp Storage
Thermal Shock
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime
at each temperature; 10 sec (max) transfer
time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Autoclave
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Sxx65x & Sxx70x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
309
Revised: June 21, 2011 04:14 PM
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
65 / 70 Amp Standard SCRs
Dimensions –TO-218X (W Package) — Non-Isolated MountingTab
Inches
Millimeters
C
Dimension
ANODE
Min
Max
Min
Max
D
B
U (diameter)
A
B
C
D
E
F
G
H
J
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.256
0.220
0.080
0.169
0.034
0.113
0.086
0.156
0.164
0.603
0.000
0.003
0.028
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.264
0.228
0.088
0.177
0.042
0.121
0.096
0.166
0.165
0.618
0.005
0.012
0.032
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
6.50
5.58
2.03
4.29
0.86
2.87
2.18
3.96
4.10
15.31
0.00
0.07
0.71
2.17
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
6.71
5.79
2.24
4.49
1.07
3.07
2.44
4.22
4.20
15.70
0.13
0.30
0.81
2.42
T
c
Measurement
Point
A
F
Z
E
CATHODE
X
W
J
K
L
GATE
R
N
M
N
P
R
S
T
U
V
W
X
Y
Z
T
S
P
ANODE
G
H
M
Y
K
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
V
Dimensions –TO-218AC (K Package) — Isolated MountingTab
T
c
Measurement Point
Inches
Millimeters
U (diameter)
Dimension
C
B
Min
Max
Min
Max
D
A
B
C
D
E
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.211
0.422
0.058
0.045
0.095
0.008
0.008
0.164
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.219
0.437
0.068
0.055
0.115
0.016
0.016
0.165
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
5.36
10.72
1.47
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
5.56
11.10
1.73
A
F
E
W
F
GATE
P
G
H
J
K
L
M
N
P
Q
R
U
W
J
CATHODE
H
M
Q
ANODE
R
G
N
K
Note: Maximum torque
to be applied to mounting
tab is 8 in-lbs. (0.904 Nm).
1.14
1.40
L
2.41
0.20
0.20
4.10
2.92
0.41
0.41
4.20
2.42
2.17
Sxx65x & Sxx70x Series
©2011 Littelfuse, Inc
310
Revised: June 21, 2011 04:14 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
65 / 70 Amp Standard SCRs
Dimensions –TO-218X (J Package) — Isolated MountingTab Common with Center Lead
C
Inches
Millimeters
Dimension
D
B
Min
Max
Min
Max
U (diameter)
A
B
C
D
E
F
G
H
J
0.810
0.610
0.178
0.055
0.487
0.635
0.022
0.075
0.575
0.256
0.220
0.080
0.169
0.034
0.113
0.086
0.156
0.164
0.603
0.000
0.003
0.028
0.085
0.835
0.630
0.188
0.070
0.497
0.655
0.029
0.095
0.625
0.264
0.228
0.088
0.177
0.042
0.121
0.096
0.166
0.165
0.618
0.005
0.012
0.032
0.095
20.57
15.49
4.52
1.40
12.37
16.13
0.56
1.91
14.61
6.50
5.58
2.03
4.29
0.86
2.87
2.18
3.96
4.10
15.31
0.00
0.07
0.71
2.17
21.21
16.00
4.78
1.78
12.62
16.64
0.74
2.41
15.88
6.71
5.79
2.24
4.49
1.07
3.07
2.44
4.22
4.20
15.70
0.13
0.30
0.81
2.42
T
c
Measurement
Point
A
F
Z
E
CATHODE
X
W
J
GATE
K
L
N
R
M
N
P
R
S
T
U
V
W
X
Y
Z
T
M
S
P
G
H
Y
ANODE
K
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
V
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
400V
600V
800V
1000V
Sxx65K
Sxx65J
X
X
X
X
X
X
X
X
X
X
50mA
50mA
50mA
Standard SCR
Standard SCR
Standard SCR
TO-218AC
TO-218X
TO-218X
Sxx70W
Note: xx = Voltage
Packing Options
Part Number
Sxx65KTP
Marking
Sxx65K
Sxx65J
Sxx70W
Weight
Packing Mode
Tube
Base Quantity
4.40g
5.23g
5.23g
250 (25 per tube)
250 (25 per tube)
250 (25 per tube)
Sxx65JTP
Tube
Sxx70WTP
Tube
Note: xx = Voltage
Sxx65x & Sxx70x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
311
Revised: June 21, 2011 04:14 PM
Teccor® brandThyristors
65 / 70 Amp Standard SCRs
Part Numbering System
Part Marking System
TO-218AC - (K Package)
TO-218X - (J Package)
TO-218X - (W Package)
S 6065 K
81
DEVICE TYPE
S: SCR
Lead Form Dimensions
xx: Lead Form Option
S6065K
SENSITIVITY & TYPE
VOLTAGE RATING
40: 400V
60: 600V
[blank]: 50mA
YMLXX
®
80: 800V
K0: 1000V
PACKAGE TYPE
K: TO-218AC (Isolated)
J: TO-218X (Isolated)
CURRENT RATING
65: 65A
70: 70A
W: TO-218X (Non-isolated)
Sxx65x & Sxx70x Series
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
312
Revised: June 21, 2011 04:14 PM
Please refer to http://www.littelfuse.com for current information.
相关型号:
S8065JTP
Silicon Controlled Rectifier, 65A I(T)RMS, 41000mA I(T), 800V V(DRM), 800V V(RRM), 1 Element, TO-218, ROHS COMPLIANT, PLASTIC, TO-218X, 3 PIN
LITTELFUSE
S8065K81
Silicon Controlled Rectifier, 65A I(T)RMS, 41000mA I(T), 800V V(DRM), 800V V(RRM), 1 Element, TO-218AC, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
S8065K81TP
Silicon Controlled Rectifier, 65A I(T)RMS, 800V V(DRM), 800V V(RRM), 1 Element, TO-218AC, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明