SA30ARLG [LITTELFUSE]
Trans Voltage Suppressor Diode, 500W, 30V V(RWM), Unidirectional, 1 Element, Silicon, LEAD FREE, PLASTIC, CASE 59AA-01, MINIMOSORB, 2 PIN;
| 型号： | SA30ARLG |
| 厂家： | 
LITTELFUSE |
| 描述： | Trans Voltage Suppressor Diode, 500W, 30V V(RWM), Unidirectional, 1 Element, Silicon, LEAD FREE, PLASTIC, CASE 59AA-01, MINIMOSORB, 2 PIN 二极管 |
| 文件： | 总5页 (文件大小：386K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SA5.0A Series
500 Watt Peak Power
Littelfuse Zener
Transient Voltage
Suppressors
Littelfuse.com
Unidirectional
The SA5.0A series is designed to protect voltage sensitive
components from high voltage, high energy transients. They have
excellent clamping capability, high surge capability, low zener
impedance and fast response time. The SA5.0A series is supplied in
Cathode
Anode
the Littelfuse exclusive,
cost-effective, highly reliable
axial leaded package and is ideally-suited for use in
communication systems, numerical controls, process controls,
medical equipment, business machines, power supplies and many
other industrial/consumer applications.
AXIAL LEAD
CASE 59AA
PLASTIC
Features
• Working Peak Reverse Voltage Range − 5.0 to 170 V
• Peak Power − 500 Watts @ 1.0 ms
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• Maximum Clamp Voltage @ Peak Pulse Current
• Low Leakage < 1 mA above 8.5 V
MARKING DIAGRAM
• UL 497B for Isolated Loop Circuit Protection
• Maximum Temperature Coefficient Specified
• Response Time is typically < 1.0 ns
A
SAxxxA
YYWWG
G
• Pb−Free Packages are Available
Mechanical Characteristics:
CASE: Void-free, Transfer-molded, Thermosetting Plastic
FINISH: All external surfaces are corrosion resistant and leads are
readily solderable
MAXIMUM LEAD TEMPERATURE FOR SOLDERING:
260°C, 1/16 in. from the case for 10 seconds
POLARITY: Cathode indicated by polarity band
MOUNTING POSITION: Any
A
= Assembly Location
SAxxxA = Device Number
(Refer to Table on Page 3)
= Year
YY
WW
G
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
SAxxxAG
Package
Shipping
Axial Lead
(Pb−Free)
1000 Units / Box
SAxxxARLG
Axial Lead 5000 / Tape & Reel
(Pb−Free)
SAxxxALFG**
Axial Lead
(Pb−Free)
2000 Units / Box
**Lead formed device.
Specifications subject to change without notice. © 2016 Littelfuse, Inc.
1
Publication Order Number:
September 19, 2016 − Rev. 13
SA5.0A/D
SA5.0A Series
MAXIMUM RATINGS
Rating
Peak Power Dissipation (Note 1) @ T ≤ 25°C
Symbol
Value
Unit
P
PK
500
W
L
Steady State Power Dissipation @ T ≤ 25°C, Lead Length = 3/8 in
P
D
3.0
30
W
mW/°C
L
Derated above T = 50°C
L
Thermal Resistance, Junction−to−Lead
R
33.3
70
°C/W
A
q
JL
Forward Surge Current (Note 2) @ T = 25°C
I
FSM
A
Operating and Storage Temperature Range
T , T
− 55 to +150
°C
J
stg
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Nonrepetitive current pulse per Figure 4 and derated above T = 25°C per Figure 5.
A
2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute.
ELECTRICAL CHARACTERISTICS (T = 25°C unless
I
A
otherwise noted, V = 3.5 V Max. @ I (Note 6) = 35 A)
F
F
I
F
Symbol
Parameter
I
Maximum Reverse Peak Pulse Current
Clamping Voltage @ I
PP
V
C
PP
V
C
V
V
BR RWM
V
Working Peak Reverse Voltage
RWM
V
I
V
F
R
T
I
I
R
Maximum Reverse Leakage Current @ V
RWM
V
Breakdown Voltage @ I
Test Current
BR
T
I
T
QV
Maximum Temperature Variation of V
Forward Current
I
BR
BR
PP
I
F
Uni−Directional TVS
V
F
Forward Voltage @ I
F
Specifications subject to change without notice. © 2016 Littelfuse, Inc.
Publication Order Number:
2
September 19, 2016 − Rev. 13
SA5.0A/D
SA5.0A Series
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted, V = 3.5 V Max. @ I (Note 6) = 35 A)
A
F
F
Breakdown Voltage
V
C
@ I (Note 5)
PP
V
RWM
V
BR
(Note 4) (Volts)
@ I
V
C
I
PP
(Note 3)
I
R
@ V
QV
BR
T
RWM
Device
Volts
mA
Min
Nom
Max
mA
Volts
A
mV/°C
Marking
Device*
SA5.0A, G
SA6.0AG
SA7.0ARLG
SA5.0A
SA6.0A
SA7.0A
5
6
7
600
600
150
6.4
6.67
7.78
6.7
7.02
8.19
7
7.37
8.6
10
10
10
9.2
10.3
12
54.3
48.5
41.7
5
5
6
SA10AG
SA12AG
SA13AG
SA10A
SA12A
SA13A
10
12
13
1
1
1
11.1
13.3
14.4
11.7
14
15.15
12.3
14.7
15.9
1
1
1
17
19.9
21.5
29.4
25.1
23.2
10
12
13
SA15AG
SA16AG
SA17ARLG
SA18ARLG
SA15A
SA16A
SA17A
SA18A
15
16
17
18
1
1
1
1
16.7
17.8
18.9
20
17.6
18.75
19.9
18.5
19.7
20.9
22.1
1
1
1
1
24.4
26
27.6
29.2
20.6
19.2
18.1
17.2
16
17
19
20
21.05
SA20ARLG
SA24AG
SA26ARLG
SA20A
SA24A
SA26A
20
24
26
1
1
1
22.2
26.7
28.9
23.35
28.1
30.4
24.5
29.5
31.9
1
1
1
32.4
38.9
42.1
15.4
12.8
11.9
23
28
30
SA28ARLG
SA30ARLG
SA33ARLG
SA36AG
SA28A
SA30A
SA33A
SA36A
28
30
33
36
1
1
1
1
31.1
33.3
36.7
40
32.75
35.05
38.65
42.1
34.4
36.8
40.6
44.2
1
1
1
1
45.4
48.4
53.3
58.1
11
10.3
9.4
31
36
39
41
8.6
SA51AG
SA64ALFG
SA51A
SA64A
51
64
1
1
56.7
71.1
59.7
74.85
62.7
78.6
1
1
82.4
103
6.1
4.9
61
76
SA100AG
SA170ARLG
SA100A
SA170A
100
170
1
1
111
189
117
199
123
209
1
1
162
275
3.1
1.8
123
208
3. The transients suppressor is normally selected according to the maximum working peak reverse voltage (V
), which should be
RWM
equal to or greater than the dc or continuous peak operating voltage level.
4. V measured at pulse test current I at an ambient temperature of 25°C.
BR
T
5. Surge current waveform per Figure 4 and derate per Figures 1 and 2.
6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute
*The “G’’ suffix indicates Pb−Free package or Pb−Free Packages available.
100
NONREPETITIVE PULSE
WAVEFORM SHOWN IN
FIGURE 4
°
100
10
80
60
1
40
20
0
0.1
0.1 ms
1 ms
10 ms
100 ms
10 ms
1 ms
0
25 50 75 100 125 150 175 200
T , AMBIENT TEMPERATURE (°C)
A
t , PULSE WIDTH
p
Figure 1. Pulse Rating Curve
Figure 2. Pulse Derating Curve
Specifications subject to change without notice. © 2016 Littelfuse, Inc.
Publication Order Number:
SA5.0A/D
3
September 19, 2016 − Rev. 13
SA5.0A Series
PULSE WIDTH (t ) IS
p
DEFINED AS THAT POINT
WHERE THE PEAK
CURRENT DECAYS TO
t ≤ 10 ms
r
10,000
100
PEAK VALUE − I
50% OF I
.
PP
PP
MEASURED @
ZERO BIAS
1000
100
10
I
PP
2
HALF VALUE −
50
0
MEASURED @
t
P
(V
RWM
)
0.1
1
10
100
1000
0
1
2
3
4
V , BREAKDOWN VOLTAGE (VOLTS)
BR
t, TIME (ms)
Figure 3. Capacitance versus Breakdown Voltage
Figure 4. Pulse Waveform
5
4
3/8″
3/8″
3
2
1
0
0
25 50 75 100 125 150 175 200
T , LEAD TEMPERATURE (°C)
L
Figure 5. Steady State Power Derating
UL RECOGNITION*
The entire series including the bidirectional CA suffix has
Underwriters Laboratory Recognition for the classification
of protectors (QVGQ2) under the UL standard for safety
Breakdown test, Endurance Conditioning, Temperature test,
Dielectric Voltage-Withstand test, Discharge test and
several more.
#E128662
497B and File
. Many competitors only have one
Whereas, some competitors have only passed a
flammability test for the package material, we have been
recognized for much more to be included in their protector
category.
*Applies to SA5.0A − SA170A.
or two devices recognized or have recognition in a
non-protective category. Some competitors have no
recognition at all. With the UL497B recognition, our parts
successfully passed several tests including Strike Voltage
Specifications subject to change without notice. © 2016 Littelfuse, Inc.
Publication Order Number:
4
September 19, 2016 − Rev. 13
SA5.0A/D
SA5.0A Series
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 59AA−01
ISSUE A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
B
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY.
4. POLARITY DENOTED BY CATHODE BAND.
5. LEAD DIAMETER NOT CONTROLLED WITHIN
F DIMENSION.
D
6. REPLACES CASE 59−09.
K
INCHES
DIM MIN MAX
MILLIMETERS
MIN
5.80
2.60
0.71
MAX
7.60
3.60
0.86
−−−
A
A
B
D
K
0.228 0.299
0.102 0.142
0.028 0.034
1.000
−−− 25.44
POLARITY INDICATOR
OPTIONAL AS NEEDED
(SEE STYLES)
K
Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military,
aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or
any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property
damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be
deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be
liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in
applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale,
unless otherwise agreed by Littelfuse.
Littelfuse.com
Specifications subject to change without notice. © 2016 Littelfuse, Inc.
Publication Order Number:
5
September 19, 2016 − Rev. 13
SA5.0A/D
相关型号：
SA30AT
Trans Voltage Suppressor Diode, 500W, 30V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN
LITTELFUSE
SA30B
Trans Voltage Suppressor Diode, 500W, 30V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC, ROHS COMPLIANT, PLASTIC, DO-15, 2 PIN
LITTELFUSE
SA30C
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power)
PANJIT
SA30C-51-E3
Trans Voltage Suppressor Diode, 500W, 30V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
SA30C-54-E3
Trans Voltage Suppressor Diode, 500W, 30V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC, PLASTIC, DO-15, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明