SE-485-PP [LITTELFUSE]
PORT-POWERED SERIAL CONVERTER;型号: | SE-485-PP |
厂家: | LITTELFUSE |
描述: | PORT-POWERED SERIAL CONVERTER |
文件: | 总2页 (文件大小:160K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Accessories
Tꢂꢀꢅꢆꢇꢃtꢆꢁꢇꢄ, adꢃptꢂꢀꢄ
TerminaTions anD aDaPTers
TerminaTions anD aDaPTers
Pꢀꢁduct
Fꢂꢃtuꢀꢂꢄ
accꢂꢄꢄꢁꢀy Fꢁꢀ
1N5339B
Termination Device
5 W axial-lead ground-check termination. Included with SE-105 and
SE-107.
SE-105
SE-107
SE-TA6-SM
Stud-Mount Termination
Assembly
50 W ground-check termination that is robust and compact for
submersible pumps. Wire lead simplifies installation.
(Replacement for 1N4553B)
SE-105
SE-107
SE-TA6
Termination Assembly
50 W ground-check termination with convenient mounting holes and
screw terminals.
SE-105
SE-107
SE-TA6A
SE-105
SE-107
SE-134C
Temperature compensated 50 W ground-check termination with
convenient mounting holes and screw terminals.
(PGA-0T6A)
Termination Assembly
SE-105
SE-107
SE-134C
SE-TA6A-WL
Termination Assembly
Temperature compensated 50 W ground-check termination with
convenient mounting holes and screw terminals.
SE-TA6ASF-WL
Small-Format Termination
Assembly with Wire Leads
Temperature compensated 12 W ground-check termination, ideal
for use in cable-coupler end caps and submersible pumps. Mounting
holes and wire leads.
SE-105
SE-107
SE-134C
SE-TA12A
Termination Assembly
Temperature compensated 50 W ground-check termination with
convenient mounting holes and screw terminals.
SE-135
SE-145
SE-TA12ASF-WL
Small-Format Termination
Assembly with Wire Leads
Temperature compensated 12 W ground-check termination, ideal
for use in cable-coupler end caps and submersible pumps. Mounting
holes and wire leads.
SE-135
SE-145
SE-TA12A-WL
Termination Assembly
Temperature compensated 50 W ground-check termination with
convenient mounting holes and screw terminals.
SE-135
SE-145
SE-TA12A
SE-TA12B
Termination Assemblies
Used together to allow an SE-134C to monitor a splitter box and two
cables.
SE-134C
Parallel ground-path rejection for ground-check monitors. Eliminates
intermachine arcing and prevents stray DC currents from flowing in
a monitored ground wire.
PPI-600V
Parallel Path Isolator
SE-105 SE-107
SE-134C SE-135
Separate ground-fault and ground-check indication contacts for the
SE-105, and separate ground-fault and resistor-fault contacts for the
SE-325. Used to provide output to a PLC and operate standard pilot
lights. Complete with conformally coated circuit boards.
RK-13
Relay Interface Module
SE-105 SE-107
SE-325
SE-485-DIN
Industrial RS-485 to RS-232
Converter
Industrial network quality RS-485 to RS-233 serial converter.
DIN-rail mounted, 24 Vdc required.
MPS
FPS
SE-485-PP
Port-Powered Serial
Converter
Converts an RS-485 signal to an RS-232 signal. Used for set-point
programming and updating flash memory. 115.2 kbit/s maximum
transfer rate.
MPU-32 MPS
FPU-32
FPS
CA-945
Serial Connector Adapter Kit
Connects an RJ45 to a 9-pin serial connector. Includes 1.5 m cable
and plug-in adapter.
MPU-32
FPU-32
SE-330
SE-330AU
SE-485-PP
CA-945
SE-ICUSB232
USB to RS-232 Converter
Connects a 9-pin serial cable to a USB port.
SE-330HV
SE-485-DIN
www.littelfuse.com/relayscontrols
© May 2012 Littelfuse Protection Relays & Controls
Accessories
Tꢂꢀꢅꢆꢇꢃtꢆꢁꢇꢄ, adꢃptꢂꢀꢄ
TerminaTions anD aDaPTers
TerminaTions anD aDaPTers
Pꢀꢁduct
Fꢂꢃtuꢀꢂꢄ
accꢂꢄꢄꢁꢀy Fꢁꢀ
A0033
Detector Cable
Extension cable for the A0200 and A0300 sensors.
D0900
Optical network-interface and firmware-upgrade communication
adapter. Field-installed.
AC700-CUA
EL731
D0900
Communications Adapter
Junction box without indication, for parallel connection of more than
2 sensors for one relay. Designed to connect up to 8 sensors.
D0400
Junction Box (No Indication)
Junction box with indication, for parallel connection of more than
2 sensors for one relay. Designed to connect up to 8 sensors.
D0500
D0900
E5000
Junction Box (Indication)
E5540
USB Cable
USB Cable with A/Mini-B plug (2 m).
G0100
Programming Kit
Connects to RS232 port. Includes blank front-plate labels and
permanent pen for texting scales.
G2000 G3000 G3300
K 3452 &K3450
For configuration from PC.
M2000
M2500
T4900
RS232 Cable
K1025
USB A-B Cable
USB A to B cable.
For external power factor setting. External contact between
terminals 12 (COM) and 28 (PF ON). Included.
T4910
Potentiometer with Cable
www.littelfuse.com/relayscontrols
© May 2012 Littelfuse Protection Relays & Controls
相关型号:
SE-5A015CF
Solid State Relay, TRIGGER OUTPUT SOLID STATE RELAY, 2500 V ISOLATION-MAX, 20 X 5 MM, 17 MM HEIGHT, SIP-4
FUJITSU
©2020 ICPDF网 联系我们和版权申明