SJ4006VS2TP [LITTELFUSE]
Thyristors 6 Amp High Temperature Sensitive & Standard SCRs;型号: | SJ4006VS2TP |
厂家: | LITTELFUSE |
描述: | Thyristors 6 Amp High Temperature Sensitive & Standard SCRs |
文件: | 总9页 (文件大小:2081K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
RoHS
SJxx06xSx & SJxx06xx Series
Description
This SJxx06xx high temperature SCR series is ideal for
uni-directional switch applications such as phase control,
heating, motor speed controls, converters/rectifiers and
capacitive discharge ignitions.
These SCRs have a low gate current trigger level of 6mA
or 15mA maximum at approximately 1.5V, with a sensitive
version of this series having a gate trigger current less than
200µA.
Features & Benefits
• Voltage capability up
to 600V
• 150°C maximum junction
temperature
Main Features
• Surge capability up
to 100A at 60Hz half cycle
• Halogen free and RoHS
compliant
Symbol
IT(RMS)
Value
6
Unit
A
Applications
VDRM/VRRM
IGT
400 or 600
0.2 to 15
V
mA
Typical applications includes capacitive discharge system
for motorcycle engine CDI, portable generator engine
ignition, strobe lights and nailers, as well as generic
rectifiers, battery voltage regulators and converters. Also
controls for power tools, home/brown goods and white
goods appliances.
Schematic Symbol
A
K
G
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 08/08/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
IT(RMS)
IT(AV)
Parameter
Test Conditions
TC = 120°C
Value
6
Unit
A
RMS on-state current
Average on-state current
TC = 120°C
3.84
A
single half cycle; f = 50Hz;
83
TJ (initial) = 25°C
ITSM
Peak non-repetitive surge current
A
single half cycle; f = 60Hz;
100
TJ (initial) = 25°C
I2t
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3ms
f = 60Hz, TJ = 150°C
Pw=20μs, TJ = 150°C
TJ = 150 °C
41
70
A2s
A/μs
A
di/dt
IGM
0.5
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
0.1
W
-40 to 150
-40 to 150
°C
Operating junction temperature range
°C
VDSM/VRSM
Peak non-repetitive blocking voltage
Pw=100μs
VDRM/VRRM+100
V
Absolute Maximum Ratings — Standard SCRs
Symbol
IT(RMS)
IT(AV)
Parameter
Test Conditions
TC = 125°C
Value
6
Unit
A
RMS on-state current
Average on-state current
TC = 125°C
3.84
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
single half cycle; f = 60Hz;
TJ (initial) = 25°C
83
ITSM
Peak non-repetitive surge current
A
100
I2t
I2t Value for fusing
tp = 8.3 ms
f = 60HzTJ = 150°C
Pw=20μs, TJ = 150°C
TJ = 150°C
41
100
A2s
A/μs
A
di/dt
IGM
Critical rate-of-rise of on-state current
Peak gate current
0.5
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
0.1
W
-40 to 150
-40 to 150
VDRM/VRRM+100
°C
°C
V
Operating junction temperature range
Peak non-repetitive blocking voltage
VDSM/VRSM
Pw=100μs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs
Value
Symbol
Test Conditions
Unit
SJxx06xS2
MIN.
MAX.
MAX.
MIN.
MIN.
MIN.
MIN.
MAX.
MAX.
TYP.
20
200
0.8
15
0.2
0.1
6
μA
μA
V
IGT
VD = 6V, RL = 100Ω
VGT
dv/dt
VD = VDRM; RGK = 220Ω ; TJ = 125°C
VD = VDRM; RL = 3.3kΩ; TJ = 125°C
VD = VDRM; RL = 3.3kΩ; TJ = 150°C
IGR = 10μA
V/μs
V
VGD
V
VGRM
IH
V
IT = 20mA (initial)
6
mA
μs
μs
tq
tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT; PW = 15µs; IT = 8A
130
6
tgt
NOTE: xx = voltage
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs
Value
Symbol
Test Conditions
Unit
SJxx06x1
SJxx06x
15
IGT
MAX.
MAX.
6
mA
V
VD = 12V RL = 60Ω
VGT
1.5
100
50
1.5
VD = VDRM; gate open; TJ = 125°C
VD = VDRM; gate open; TJ = 150°C
VD = VDRM; RL = 3.3kΩ; TJ = 125°C
VD = VDRM; RL = 3.3kΩ; TJ = 150°C
IT = 200mA (initial)
200
120
0.2
0.1
30
dv/dt
VGD
MIN.
V/μs
V
MIN.
MIN.
MAX.
MAX.
TYP.
0.2
0.1
20
IH
tq
mA
μs
IT=0.5A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT; PW = 15µs; IT = 8A
30
35
tgt
0.5
2
μs
NOTE: xx = voltage
Static Characteristics
Symbol
Test Conditions
IT = 12A; tp = 380 µs
Value
1.6
Unit
VTM
MAX.
MAX.
V
TJ = 25°C
TJ = 125°C, RGK = 220Ω
TJ = 150°C, RGK = 220Ω
TJ = 25°C
400 - 600V
400 - 600V
400 - 600V
400 - 600V
400 - 600V
400 - 600V
5
SJxx06xS2
SJxx06xx
1000
3000
10
I
DRM / IRRM
@ VDRM / VRRM
μA
TJ = 125°C
1000
3000
TJ = 150°C
Thermal Resistances
Symbol
Parameter
Value
Unit
°C/W
SJxx06xS2
SJxx06xx
1.2
1.2
Junction to case (AC)
Rθ(J-C)
Note: xx = voltage
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature (Sensitive SCR)
Figure 2: Normalized DC GateTrigger Current
vs. JunctionTemperature (Standard SCR)
1.8
1.8
1.6
1.4
1.2
1
1.6
RGK=1K
1.4
1.2
1
RGK=220Ω
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
150
-40
-15
10
35
60
85
110
135
-40
-15
10
35
60
85
110
135 150
JunctionTemperature (TJ) -- (°C)
JunctionTemperature (TJ) -- (°C)
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 08/02/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Figure 3: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
Figure 4: Normalized DC Holding Current
vs. JunctionTemperature
2.5
1.4
1.2
1
SJxx06xS2
SJxx06xS2
2
1.5
1
SJxx06xx
0.8
0.6
0.4
0.2
0
SJxx06xx
0.5
0
150
135
-40
-15
10
35
60
85
110
150
135
-40
-15
10
35
60
85
110
JunctionTemperature (TJ) -- (°C)
JunctionTemperature (TJ) -- (°C)
Figure 5: On-State Current vs. On-State
Voltage (Typical)
Figure 6: Power Dissipation (Typical) vs. RMS
On-State Current
6
35
30
J
SJxx06xx
4
25
20
15
10
5
SJxx06xS2
SJxx06xx
SJxx06xS2
2
0
0
2
4
6
0
0.7 0.8 0.9
1
1.1 1.2 1.3 1.4 1.5 1.6 1.7
RMS On-State Current [I T(RMS)] - (Amps)
Instantaneous On-state Voltage (VT) – Volts
Figure 7: Maximum Allowable CaseTemperature
vs. RMS On-State Current
Figure 8: Maximum Allowable CaseTemperature
vs. Average On-State Current
160
150
160
150
SJxx06xx
140
130
120
110
100
90
SJxx06xx
140
130
SJxx06xS2
SJxx06xS2
120
110
100
90
80
80
0
1
2
3
4
5
6
0
1
2
3
4
RMS On-State Current [IT (RMS)] - (Amps)
Average On-State Current [AV ] - (Amps)
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Figure 9: Peak Capacitor Discharge Current
1000
100
10
ITRM
tW
0.5
1.0
10.0
50.0
Pulse Current Duration (tW) - ms
Figure 10: Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
100
10
1
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
1
10
100
1000
Surge Current Duration -- Full Cycles
Figure 11:Typical DC GateTrigger Current with RGK vs.
JunctionTemperature (Sensitive SCR)
Figure 12:Typical DC Holding Current with RGK vs.
JunctionTemperature (Sensitive SCR)
10
RGK=100Ω
RGK=220Ω
10
RGK=100Ω
RGK=470Ω
1
0.1
RGK=220Ω
RGK=470Ω
RGK=1KΩ
1
No RGK
No RGK
RGK=1KΩ
0.01
0.1
-40 -20
0
20 40 60 80 100 120 140
-40 -20
0
20
40
60
80 100 120 140
(°C)
Junction Temperature (T ) --
(°C)
Junction Temperature (T ) --
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Figure 13:Typical Static dv/dt with RGK vs. Junction
Temperature (Sensitive SCR)
10000
1000
100
10
R
GK=100Ω
RGK=220Ω
RGK=470Ω
RGK=1KΩ
1
25
45
65
85
105
125
Junction Temperature (T ) --
(°C)
Soldering Parameters
Reflow Condition
Pb – Free assembly
150°C
tP
-Temperature Min (Ts(min)
)
TP
Ramp-up
Pre Heat -Temperature Max (Ts(max)
)
200°C
TL
TS(max)
-Time (min to max) (ts)
60 – 180 secs
tL
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
Ramp-down
Preheat
TS(min)
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
tS
-Temperature (TL) (Liquidus)
Reflow
-Time (tL)
60 – 150 seconds
260+0/-5 °C
25
time to peak temperature
PeakTemperature (TP)
Time
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage for 1008 hours
UL Recognized epoxy meeting
flammability rating V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature Cycling
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 160V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Moisture Sensitivity
Level
Level 1, JEDEC-J-STD-020
Product Selector
Voltage
Part Number
SJxx06VS2
Gate Sensitivity
Type
Package
400V
600V
X
X
X
X
X
X
X
X
X
X
X
X
0.2mA
0.2mA
15mA
15mA
6mA
Sensitive SCR
Sensitive SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
TO-251
TO-252
TO-251
TO-252
TO-251
TO-252
SJxx06DS2
SJxx06V
SJxx06D
SJxx06V1
SJxx06D1
Note: xx = Voltage
6mA
Packing Options
Part Number
SJxx06DS2TP
SJxx06DS2RP
SJxx06VS2TP
SJxx06DTP
Marking
Weight
0.3 g
0.3 g
0.4 g
0.3 g
0.3 g
0.4 g
0.3 g
0.3 g
0.4 g
Packing Mode
Base Quantity
750 (75 per tube)
SJxx06DS2
SJxx06DS2
SJxx06VS2
SJxx06D
Tube
Embossed Carrier
Tube
2500
750 (75 per tube)
750 (75 per tube)
2500
Tube
SJxx06DRP
SJxx06VTP
SJxx06D
Embossed Carrier
Tube
SJxx06V
750 (75 per tube)
750 (75 per tube)
2500
SJxx06D1TP
SJxx06D1RP
SJxx06D1
SJxx06D1
SJxx06V1
Tube
Embossed Carrier
Tube
SJxx06V1TP
750 (75 per tube)
Note: xx = Voltage
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
Dimensions —TO-251AA (V/I-Package) —V/I-PAKThrough Hole
TC MEASURING POINT
AREA: 0.040 IN2
Inches
Typ
Millimeters
Typ
Dimension
Min
Max
0.043
0.245
0.375
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.039
0.023
0.052
0.044
0.044
0.084
Min
0.94
5.97
8.89
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.90
0.46
1.06
0.86
0.86
1.86
Max
1.09
6.22
9.53
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.00
0.58
1.32
1.11
E
H
J
5.28
.208
Anode
A
D
A
B
C
D
E
F
0.037
0.235
0.350
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.035
0.018
0.042
0.034
0.034
0.074
0.040
0.242
0.361
0.208
0.262
0.031
0.090
0.092
0.180
0.020
0.037
0.020
0.047
0.039
0.039
0.079
1.01
6.15
9.18
5.29
6.66
0.80
2.28
2.34
4.57
0.51
0.95
0.52
1.20
5.34
.210
B
R
P
Q
S
G
H
I
K
C
J
K
L
Cathode
L
F
Anode
GATE
G
P
Q
R
S
I
1.00
1.00
1.11
2.00
2.11
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount
E
6.71
.264
Anode
5.28
.208
TC MEASURING POINT
Inches
Typ
Millimeters
Typ
D
Dimension
Min
0.037
0.235
0.106
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.035
0.018
0.000
0.021
0°
Max
0.043
0.245
0.113
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.039
0.023
0.004
0.027
5°
Min
0.94
5.97
2.69
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.90
0.46
0.00
0.53
0°
Max
1.09
6.22
2.87
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.00
0.58
0.10
0.69
5°
A
B
6.71
.264
5.34
.210
A
B
C
D
E
F
0.040
0.243
0.108
0.208
0.262
0.031
0.090
0.092
0.179
0.020
0.037
0.020
0.000
0.026
0°
1.01
6.16
2.74
1.60
.063
P
Q
C
1.80
.071
5.29
6.65
0.80
2.28
2.33
4.55
0.51
0.95
0.51
0.00
0.67
0°
GATE
F
AREA: 0.040 IN2
Cathode
Anode
3
.118
4.60
.181
G
I
G
H
I
L
O
H
K
J
M
N
J
K
L
M
N
O
P
Q
0.042
0.034
0.047
0.039
0.052
0.044
1.06
0.86
1.20
1.32
1.11
1.00
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 07/31/17
Thyristors
6 Amp High Temperature Sensitive & Standard SCRs
TO-252 Embossed Carrier Reel Pack (RP) Specifications
0.157
(4.0)
Meets all EIA-481-2 Standards
0.059
(1.5)
Dia
Gate
Cathode
0.63
(16.0)
0.524
(13.3)
*
0.315
(8.0)
*
Cover tape
Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Part Numbering System
SJ 60 06 D S2
Part Marking System
SJxx06DS2
SENSITIVITY & TYPE
Sensitive SCR:
S2: 0.2mA
COMPONENT TYPE
SJ : SCR
VOLTAGE RATING
40 : 400V
Standard SCR:
1: 6mA
(blank): 15mA
YMLDD
®
60 : 600V
CURRENT
06: 6A
PACKAGE TYPE
V : TO-251 (VPAK)
D : TO-252 (DPAK)
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
Disclaimer Noꢀce - Informaꢀon furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applicaꢀons. Liꢁelfuse products are not designed for, and may not be used in, all applicaꢀons.
Read complete Disclaimer Noꢀce at www.liꢁelfuse.com/disclaimier-electronics.
©2017 Littelfuse, Inc
Specifications are subject to change without notice.
SJxx06xSx & SJxx06xx Series
Revised: 07/31/17
相关型号:
SJ4245
Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, HERMETIC SEALED, GLASS, 103, 2 PIN
SENSITRON
SJ4245US
Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, HERMETIC SEALED, GLASS, MELF-1, 2 PIN
SENSITRON
SJ4246
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, HERMETIC SEALED, GLASS, 103, 2 PIN
SENSITRON
SJ4246US
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, HERMETIC SEALED, GLASS, MELF-1, 2 PIN
SENSITRON
SJ4247
Rectifier Diode, 1 Element, 1A, 600V V(RRM), Silicon, HERMETIC SEALED, GLASS, 103, 2 PIN
SENSITRON
SJ4247US
Rectifier Diode, 1 Element, 1A, 600V V(RRM), Silicon, HERMETIC SEALED, GLASS, MELF-1, 2 PIN
SENSITRON
SJ4248
Rectifier Diode, 1 Element, 1A, 800V V(RRM), Silicon, HERMETIC SEALED, GLASS, 103, 2 PIN
SENSITRON
SJ4248US
Rectifier Diode, 1 Element, 1A, 800V V(RRM), Silicon, HERMETIC SEALED, GLASS, MELF-1, 2 PIN
SENSITRON
SJ4249
Rectifier Diode, 1 Element, 1A, 1000V V(RRM), Silicon, HERMETIC SEALED, GLASS, 103, 2 PIN
SENSITRON
©2020 ICPDF网 联系我们和版权申明