SJ6004VS2TP [LITTELFUSE]

4 Amp High Temperature Sensitive SCRs;
SJ6004VS2TP
型号: SJ6004VS2TP
厂家: LITTELFUSE    LITTELFUSE
描述:

4 Amp High Temperature Sensitive SCRs

文件: 总7页 (文件大小:1852K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Thyristors  
4 Amp High Temperature Sensitive SCRs  
RoHS  
SJxx04xSx Series  
Description  
This SJxx04x high temperature SCR series is ideal for  
uni-directional switch applications such as phase control  
in heating, motor speed controls, converters/rectifiers and  
capacitive discharge ignitions  
These SCRs have a low gate current trigger level of 20μA  
maximum at approximately 1.5V.  
Features & Benefits  
• Voltage capability up  
to 600V  
• 150°C maximum junction  
temperature  
Main Features  
• Surge capability up  
to 100A at 60Hz half cycle  
• Halogen free and RoHS  
compliant  
Symbol  
Value  
Unit  
A
IT(RMS)  
4
Applications  
VDRM/VRRM  
IGT  
400 or 600  
0.2  
V
Typical applications includes capacitive discharge system  
for motorcycle engine CDI, portable generator engine  
ignition, strobe lights and nailers, as well as generic  
rectifiers, battery voltage regulators and converters. Also  
controls for power tools, home/brown goods and white  
goods appliances.  
mA  
Schematic Symbol  
A
K
G
Absolute Maximum Ratings — Sensitive SCRs  
Symbol  
IT(RMS)  
IT(AV)  
Parameter  
Test Conditions  
TC = 130°C  
Value  
4
Unit  
A
RMS on-state current  
Average on-state current  
TC = 130°C  
2.56  
A
single half cycle; f = 50 Hz;  
25  
30  
TJ (initial) = 25°C  
ITSM  
Peak non-repetitive surge current  
A
single half cycle; f = 60 Hz;  
TJ (initial) = 25°C  
I2t  
I2t Value for fusing  
tp = 8.3 ms  
f = 60 Hz, TJ = 150 °C  
Pw=20 μs, TJ = 150 °C  
TJ = 150 °C  
3.7  
50  
A2s  
A/μs  
A
di/dt  
IGM  
Critical rate of rise of on-state current  
Peak gate current  
0.5  
PG(AV)  
Tstg  
TJ  
Average gate power dissipation  
Storage temperature range  
0.1  
W
-40 to 150  
-40 to 150  
VDRM/VRRM+100  
°C  
°C  
V
Operating junction temperature range  
Peak non-repetitive blocking voltage  
VDSM/VRSM  
Pw=100 μs  
©2017 Littelfuse, Inc  
Specifications are subject to change without notice.  
SJxx04xSx Series  
Revised: 08/02/17  
Thyristors  
4 Amp High Temperature Sensitive SCRs  
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs  
Symbol  
Test Conditions  
VD = 6V RL = 100 Ω  
Value  
20  
200  
0.8  
45  
0.2  
0.1  
6
Unit  
μA  
μA  
V
MIN.  
MAX.  
MAX.  
MIN.  
MIN.  
MIN.  
MIN.  
MAX.  
MAX.  
TYP.  
IGT  
VGT  
dv/dt  
VD = VDRM; RGK = 220Ω ; TJ = 125°C  
VD = VDRM; RL = 3.3 kΩ; TJ = 125°C  
VD = VDRM; RL = 3.3 kΩ; TJ = 150°C  
IGR = 10μA  
V/μs  
V
VGD  
V
VGRM  
IH  
V
IT = 20mA (initial)  
6
mA  
μs  
μs  
tq  
tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs  
IG = 2 x IGT; PW = 15µs; IT = 8A  
60  
3
tgt  
Static Characteristics  
Symbol  
Test Conditions  
IT = 8A; tp = 380 µs  
Value  
1.6  
Unit  
VTM  
MAX.  
MAX.  
V
TJ = 25°C  
400 - 600V  
400 - 600V  
400 - 600V  
5
IDRM / IRRM  
@ VDRM / VRRM  
= 125°C, RGK = 220Ω  
1000  
3000  
μA  
TJ  
TJ = 150°C, RGK = 220Ω  
Thermal Resistances  
Symbol  
Parameter  
Junction to case (AC)  
Value  
Unit  
°C/W  
1.5  
Rθ(J-C)  
Figure 1: Normalized DC GateTrigger Current  
vs. JunctionTemperature (Sensitive SCR)  
Figure 2: Normalized DC GateTriggerVoltage  
vs. JunctionTemperature  
1.4  
1.2  
1
1.8  
1.6  
RGK=1K  
1.4  
1.2  
0.8  
0.6  
0.4  
0.2  
0
1
RGK=220Ω  
0.8  
0.6  
0.4  
0.2  
0
150  
135  
-40  
-15  
10  
35  
60  
85  
110  
-40  
-15  
10  
35  
60  
85  
110  
135 15  
JunctionTemperature (TJ) -- (°C)  
JunctionTemperature (TJ) -- (°C)  
©2017 Littelfuse, Inc  
Specifications are subject to change without notice.  
SJxx04xSx Series  
Revised: 08/02/17  
Thyristors  
4 Amp High Temperature Sensitive SCRs  
Figure 3: Normalized DC Holding Current  
vs. JunctionTemperature  
Figure 4: On-State Current vs. On-State  
Voltage (Typical)  
15  
12  
9
1.6  
1.4  
1.2  
1
0.8  
0.6  
0.4  
0.2  
0
6
3
0
0.7 0.8 0.9  
1
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9  
2
15  
135  
-40  
-15  
10  
35  
60  
85  
110  
Instantaneous On-state Voltage (VT) – Volts  
Junction Temperature (TJ) -- (°C)  
Figure 5: Power Dissipation (Typical) vs. RMS  
On-State Current  
Figure 6: Maximum Allowable CaseTemperature  
vs. RMS On-State Current  
5
4.5  
4
160  
150  
140  
130  
120  
110  
100  
90  
3.5  
3
2.5  
2
1.5  
1
0.5  
0
80  
0
1
2
3
4
5
0
1
2
3
4
RMS On-State Current [IT (RMS)] - (Amps)  
RMS On-State Current [I T(RMS)] - (Amps)  
Figure 7: Maximum Allowable CaseTemperature  
vs. Average On-State Current  
Figure 8: Peak Capacitor Discharge Current  
1000  
160  
150  
140  
130  
120  
110  
100  
90  
100  
ITRM  
tW  
80  
10  
0.5  
1.0  
10.0  
50.0  
0
0.5 1.0  
1.5  
2.0  
2.5  
3.0  
3.5  
Pulse Current Duration (tW) - ms  
Average On-State Current [AV ] - (Amps)  
©2017 Littelfuse, Inc  
Specifications are subject to change without notice.  
SJxx04xSx Series  
Revised: 08/02/17  
Thyristors  
4 Amp High Temperature Sensitive SCRs  
Figure 9: Surge Peak On-State Current vs. Number of Cycles  
1000  
100  
10  
SUPPLY FREQUENCY: 60 Hz Sinusoidal  
LOAD: Resistive  
RMS On-State Current: [IT(RMS)]: Maximum Rated  
Value at Specified Case Temperature  
Notes:  
1. Gate control may be lost during and immediately  
following surge current interval.  
2. Overload may not be repeated until junction  
temperature has returned to steady-state  
rated value.  
1
1
10  
100  
1000  
Surge Current Duration -- Full Cycles  
Figure 10:Typical DC GateTrigger Current with RGK vs.  
JunctionTemperature  
Figure 11:Typical DC Holding Current with RGK vs.  
JunctionTemperature  
10.00  
10.0E+00  
RGK=100Ω  
R
GK=100Ω  
RGK=220Ω  
RGK=220Ω  
RGK=470Ω  
RGK=1KΩ  
1.00  
RGK=470Ω  
1.0E+00  
RGK=1KΩ  
0.10  
100.0E-03  
-40  
-15  
10  
35  
60  
85  
110  
(°C)  
135  
150  
-40 -15  
10  
35  
60  
85  
110 135 150  
Junction Temperature (T ) --  
Junction Temperature (T ) --  
(°C)  
Figure 12:Typical Static dv/dt with RGK vs. Junction  
Temperature  
1000  
R
GK=100Ω  
100  
10  
1
RGK=220Ω  
RGK=470Ω  
RGK=1KΩ  
25  
75  
125  
©2017 Littelfuse, Inc  
Specifications are subject to change without notice.  
SJxx04xSx Series  
Revised: 08/02/17  
Thyristors  
4 Amp High Temperature Sensitive SCRs  
Soldering Parameters  
Reflow Condition  
Pb – Free assembly  
tP  
-Temperature Min (Ts(min)  
)
150°C  
TP  
Pre Heat -Temperature Max (Ts(max)  
)
200°C  
Ramp-up  
TL  
TS(max)  
-Time (min to max) (ts)  
60 – 180 secs  
tL  
Average ramp up rate (LiquidusTemp)  
(TL) to peak  
5°C/second max  
Ramp-down  
Preheat  
TS(max) toTL - Ramp-up Rate  
5°C/second max  
217°C  
TS(min)  
tS  
-Temperature (TL) (Liquidus)  
Reflow  
-Time (tL)  
60 – 150 seconds  
260+0/-5 °C  
25  
time to peak temperature  
PeakTemperature (TP)  
Time  
Time within 5°C of actual peak  
Temperature (tp)  
20 – 40 seconds  
Environmental Specifications  
Ramp-down Rate  
5°C/second max  
8 minutes Max.  
280°C  
Time 25°C to peakTemperature (TP)  
Do not exceed  
Test  
AC Blocking  
Specifications and Conditions  
MIL-STD-750, M-1040, Cond A Applied  
Peak AC voltage for 1008 hours  
Physical Specifications  
MIL-STD-750, M-1051,  
100 cycles; -40°C to +150°C; 15-min  
dwell-time  
Temperature Cycling  
Terminal Finish  
Body Material  
Lead Material  
100% MatteTin-plated  
EIA / JEDEC, JESD22-A101  
1008 hours; 160V - DC: 85°C; 85%  
rel humidity  
UL Recognized epoxy meeting  
Temperature/  
Humidity  
flammability rating V-0  
Copper Alloy  
MIL-STD-750, M-1031,  
1008 hours; 150°C  
HighTemp Storage  
Low-Temp Storage  
1008 hours; -40°C  
Design Considerations  
Resistance to  
Solder Heat  
MIL-STD-750 Method 2031  
Careful selection of the correct component for the  
application’s operating parameters and environment will  
go a long way toward extending the operating life of the  
Thyristor. Good design practice should limit the maximum  
continuous current through the main terminals to 75% of  
the component rating. Other ways to ensure long life for  
a power discrete semiconductor are proper heat sinking  
and selection of voltage ratings for worst case conditions.  
Overheating, overvoltage (including dv/dt), and surge  
currents are the main killers of semiconductors. Correct  
mounting, soldering, and forming of the leads also help  
protect against component damage.  
Solderability  
Lead Bend  
ANSI/J-STD-002, category 3, Test A  
MIL-STD-750, M-2036 Cond E  
Moisture Sensitivity  
Level  
Level 1, JEDEC-J-STD-020  
©2017 Littelfuse, Inc  
Specifications are subject to change without notice.  
SJxx04xSx Series  
Revised: 08/02/17  
Thyristors  
4 Amp High Temperature Sensitive SCRs  
Dimensions TO-251AA (V/I-Package) V/I-PAKThrough Hole  
TC MEASURING POINT  
AREA: 0.040 IN2  
Inches  
Typ  
Millimeters  
Typ  
Dimension  
Min  
Max  
0.043  
0.245  
0.375  
0.213  
0.265  
0.033  
0.093  
0.095  
0.184  
0.023  
0.039  
0.023  
0.052  
0.044  
0.044  
0.084  
Min  
0.94  
5.97  
8.89  
5.21  
6.48  
0.69  
2.21  
2.16  
4.47  
0.46  
0.90  
0.46  
1.06  
0.86  
0.86  
1.86  
Max  
1.09  
6.22  
9.53  
5.41  
6.73  
0.84  
2.36  
2.41  
4.67  
0.58  
1.00  
0.58  
1.32  
1.11  
E
H
J
5.28  
.208  
Anode  
A
D
A
B
C
D
E
F
0.037  
0.235  
0.350  
0.205  
0.255  
0.027  
0.087  
0.085  
0.176  
0.018  
0.035  
0.018  
0.042  
0.034  
0.034  
0.074  
0.040  
0.242  
0.361  
0.208  
0.262  
0.031  
0.090  
0.092  
0.180  
0.020  
0.037  
0.020  
0.047  
0.039  
0.039  
0.079  
1.01  
6.15  
9.18  
5.29  
6.66  
0.80  
2.28  
2.34  
4.57  
0.51  
0.95  
0.52  
1.20  
5.34  
.210  
B
R
P
Q
S
G
H
I
K
C
J
K
L
Cathode  
L
F
Anode  
GATE  
G
P
Q
R
S
I
1.00  
1.00  
1.11  
2.00  
2.11  
Dimensions TO-252AA (D-Package) — D-PAK Surface Mount  
E
6.71  
.264  
Anode  
5.28  
.208  
TC MEASURING POINT  
Inches  
Typ  
Millimeters  
Typ  
D
Dimension  
Min  
0.037  
0.235  
0.106  
0.205  
0.255  
0.027  
0.087  
0.085  
0.176  
0.018  
0.035  
0.018  
0.000  
0.021  
0°  
Max  
0.043  
0.245  
0.113  
0.213  
0.265  
0.033  
0.093  
0.095  
0.184  
0.023  
0.039  
0.023  
0.004  
0.027  
5°  
Min  
0.94  
5.97  
2.69  
5.21  
6.48  
0.69  
2.21  
2.16  
4.47  
0.46  
0.90  
0.46  
0.00  
0.53  
0°  
Max  
1.09  
6.22  
2.87  
5.41  
6.73  
0.84  
2.36  
2.41  
4.67  
0.58  
1.00  
0.58  
0.10  
0.69  
5°  
A
B
6.71  
.264  
5.34  
.210  
A
B
C
D
E
F
0.040  
0.243  
0.108  
0.208  
0.262  
0.031  
0.090  
0.092  
0.179  
0.020  
0.037  
0.020  
0.000  
0.026  
0°  
1.01  
6.16  
2.74  
1.60  
.063  
P
Q
C
1.80  
.071  
5.29  
6.65  
0.80  
2.28  
2.33  
4.55  
0.51  
0.95  
0.51  
0.00  
0.67  
0°  
GATE  
F
AREA: 0.040 IN2  
Cathode  
Anode  
3
.118  
4.60  
.181  
G
I
G
H
I
L
O
H
K
J
M
N
J
K
L
M
N
O
P
Q
0.042  
0.034  
0.047  
0.039  
0.052  
0.044  
1.06  
0.86  
1.20  
1.32  
1.11  
1.00  
©2017 Littelfuse, Inc  
Specifications are subject to change without notice.  
SJxx04xSx Series  
Revised: 08/02/17  
Thyristors  
4 Amp High Temperature Sensitive SCRs  
TO-252 Embossed Carrier Reel Pack (RP) Specifications  
0.157  
(4.0)  
Meets all EIA-481-2 Standards  
0.059  
(1.5)  
Dia  
Gate  
Cathode  
0.63  
(16.0)  
0.524  
(13.3)  
*
0.315  
(8.0)  
*
Cover tape  
Anode  
12.99  
(330.0)  
0.512 (13.0) Arbor  
Hole Dia.  
Dimensions  
are in inches  
(and millimeters).  
0.64  
(16.3)  
Direction of Feed  
Product Selector  
Voltage  
Part Number  
Gate Sensitivity  
Type  
Package  
400V  
600V  
SJxx04VS2  
X
X
X
X
0.2mA  
0.2mA  
Sensitive SCR  
Sensitive SCR  
TO-251  
TO-252  
SJxx04DS2  
Note: xx = Voltage  
Packing Options  
Part Number  
SJxx04DS2TP  
SJxx04DS2RP  
Marking  
Weight  
0.3 g  
Packing Mode  
Base Quantity  
SJxx04DS2  
SJxx04DS2  
SJxx04VS2  
Tube  
Embossed Carrier  
Tube  
750 (75 per tube)  
2500  
0.3 g  
SJxx04VS2TP  
0.4 g  
750 (75 per tube)  
Note: xx = Voltage  
Part Numbering System  
SJ 60 04 D S2  
Part Marking System  
SJxx04DS2  
YMLDD  
SENSITIVITY  
COMPONENT TYPE  
SJ: SCR  
S2:0.2mA  
VOLTAGE RATING  
40 : 400V  
PACKAGE TYPE  
V : TO-251 (VPAK)  
D : TO-252 (DPAK)  
®
60 : 600V  
CURRENT  
04: 4A  
Date Code Marking  
Y:Year Code  
M: Month Code  
L: Location Code  
DD: Calendar Code  
Disclaimer Noꢀce - Informaꢀon furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and  
test each product selected for their own applicaꢀons. Liꢁelfuse products are not designed for, and may not be used in, all applicaꢀons.  
Read complete Disclaimer Noꢀce at www.liꢁelfuse.com/disclaimier-electronics.  
©2017 Littelfuse, Inc  
Specifications are subject to change without notice.  
SJxx04xSx Series  
Revised: 08/02/17  

相关型号:

UL1042

UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowego

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV201

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14

IC-SM-VIDEO AMP

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14TA

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14TC

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV302N16

IC-SM-4:1 MUX SWITCH

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV4089

VIDEO AMPLIFIER WITH DC RESTORATION

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX