SJ6016N1RP [LITTELFUSE]
Silicon Controlled Rectifier,;
| 型号： | SJ6016N1RP |
| 厂家： | 
LITTELFUSE |
| 描述： | Silicon Controlled Rectifier, |
| 文件： | 总8页 (文件大小：449K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Thyristors
16 Amps High Junction Temperature SCRs
RoHS
SJxx16xx Series
Description
This SJxx16xx high junction temperature SCR series is
ideal for uni-directional switch applications such as phase
control in heating, motor speed controls, converters/
rectifiers and inrush current controllers.
These SCRs offer low gate current trigger levels of 6 mA,
10 mA, or 30 mA at approximately 1.5V.
Features & Benefits
• Halogen free and RoHS
compliant
• Surge capability up to
225A at 60 Hz half cycle
• 150°C maximum junction
temperature
Applications
Agency Approvals
Typical applications include AC Generator (ACG) rectifiers,
battery voltage regulators, generic converters and inrush
current controller in various AC and DC applications.
Additional applications include controls for power tools,
home/brown good and white goods appliances.
AGENCY
AGENCY FILE NUMBER
E71639*
* - L Package Only
Internally constructed isolated packages are offered for
ease of heat sinking with high isolation voltage.
Schematic Symbol
Main Features
Symbol
IT(RMS)
Value
16
Unit
A
A
K
VDRM/VRRM
400 or 600
6, 10 or 30
V
IGT
mA
G
Absolute Maximum Ratings — Standard SCRs
Symbol
VDRM/VRSM
Parameter
Test Conditions
Pw=100 μs
Value
Unit
Peak non-repetitive blocking voltage
VDRM/VRRM+100
V
SJxx16Lx
TC = 110°C
16
IT(RMS)
RMS on-state current
A
SJxx16Rx
SJxx16Nx
TC = 135°C
TC = 110°C
TC = 135°C
16
10
10
SJxx16Lx
IT(AV)
Average on-state current
A
A
SJxx16Rx
SJxx16Nx
single half cycle; f = 50Hz;
188
225
TJ (initial) = 25°C
ITSM
Peak non-repetitive surge current
single half cycle; f = 60Hz;
TJ (initial) = 25°C
I2t
di/dt
IGM
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3 ms
f = 60 Hz ;TJ = 150°C
TJ = 150°C
210
125
A2s
A/μs
A
3
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
TJ = 150°C
0.6
W
-40 to 150
-40 to 150
°C
Operating junction temperature range
°C
Note: xx=voltage/10, x=sensitivity
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 12/11/18
Thyristors
16 Amps High Junction Temperature SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
Test Conditions
SJxx16x
SJxx16x1
SJxx16x2
Unit
mA
V
MIN.
MAX.
MAX.
8
2
6
5
IGT
30
1.5
10
1.5
VD = 12V; RL = 60 Ω
VGT
1.5
VD = 67%VDRM; gate open;TJ = 125°C
VD = 67% VDRM; gate open;TJ = 150°C
800
400
70
-
500
200
dv/dt
MIN.
V/μs
VGD
IH
VD = VDRM RL = 3.3 kΩ TJ = 110°C
IT = 200mA (initial)
MIN.
MAX.
MAX.
TYP.
0.2
75
40
2
0.2
15
40
2
0.2
35
40
2
V
mA
μs
tq
IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT PW = 15µs IT = 32A
tgt
μs
Note: xx=voltage/10, x=package
Static Characteristics
Symbol
VTM
Test Conditions
Component IT = 32A; tp = 380 µs
Value
Unit
V
MAX.
MAX.
1.6
10
TJ = 25°C
TJ = 125°C
TJ = 150°C
1000
3000
IDRM / IRRM
VDRM = VRRM
μA
Thermal Resistances
Symbol
Parameter
Value
1.0
Unit
SJxx16Rx
SJxx16Nx
RƟ(JC)
Junction to case (AC)
°C/W
SJxx16Lx
2.5
Note: xx=voltage/10, x=sensitivity
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
1.6
1.4
1.2
1
2.5
2.0
1.5
1.0
0.5
0.0
0.8
0.6
0.4
0.2
0
-40
-15
10
35
60
85
110
135 150
-40
-15
10
35
60
85
110
135 150
JunctionTemperature (TJ) -- (ºC)
JunctionTemperature (TJ) -- (°C)
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 12/11/18
Thyristors
16 Amps High Junction Temperature SCRs
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
45
40
35
30
25
20
15
10
2.5
2
1.5
1
0.5
0
5
0
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
-40
-15
10
35
60
85
110
135 150
Instantaneous On-stateVoltage (VT) –Volts
JunctionTemperature (TJ) - (°C)
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. RMS On-State Current
155
150
15
12
9
145
SJxx16Rx
SJxx16Nx
140
135
130
125
120
115
110
105
SJxx16Lx
6
3
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
0
0
2
4
6
8
10
12
14
16
0
2
4
6
8
10
12
14
16
18
RMS On-State Current [IT(RMS)] - Amps
RMS On-State Current [I T(RMS) ] - (Amps)
Figure 7: Maximum Allowable CaseTemperature
vs. Average On-State Current
Figure 8: Peak Capacitor Discharge Current
1000
150
145
SJxx16Rx
SJxx16Nx
140
135
130
100
SJxx16Lx
125
120
115
ITRM
110
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
tW
105
100
10
0.5
1.0
10.0
50.0
0
1
2
3
4
5
6
7
8
9
10
11
Pulse Current Duration (tw) - ms
Average On-State Current [IT(AVG) ] - Amps
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 12/11/18
Thyristors
16 Amps High Junction Temperature SCRs
Figure 9: Peak Capacitor Discharge Current Derating
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
25
50
75
100
125
150
CaseTemperature (TC) - ºC
Figure 10: Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
SJx16Rx
SJxx16Nx
100
SJxx16Lx
10
1
10
100
1000
Surge Current Duration -- Full Cycles
SJxx16xx Series
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 12/11/18
Thyristors
16 Amps High Junction Temperature SCRs
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
)
150°C
Ramp-up
Pre Heat
)
200°C
TL
TS(max)
tL
60 – 180 secs
Average ramp up rate (LiquidusTemp) (TL) to
peak
Ramp-down
5°C/second max
Preheat
TS(min)
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
tS
-Temperature (TL) (Liquidus)
Reflow
-Time (tL)
60 – 150 seconds
260+0/-5 °C
25
time to peak temperature
Time
PeakTemperature (TP)
Time within 5°C of actual peakTemperature
(tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Test
Specifications and Conditions
Terminal Finish
Body Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied Peak
AC voltage @ 150°C for 1008 hours
AC Blocking
UL recognized compound meeting flammability
rating V-0.
MIL-STD-750, M-1051,
100 cycles; -55°C to +150°C;
15-min dwell-time
Temperature Cycling
Lead Material
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 160V - DC: 85°C;
85% rel humidity
Temperature/Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Moisture Sensitivity
Level
Level 1, JEDEC-J-STD-020D
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 12/11/18
Thyristors
16 Amps High Junction Temperature SCRs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
TC MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
O
Dimension
8.13
.320
A
E
Min
Max
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
P
ANODE
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
B
C
13.36
.526
D
7. 01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
L
K
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min Max
O
Dimension
8.13
.320
A
E
Min
Max
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
B
C
13.36
.526
D
7. 01
.276
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 12/11/18
Thyristors
16 Amps High Junction Temperature SCRs
Dimensions —TO- 263AB (N-package) — D2-Pak Surface Mount
C
2
AREA: 0.11 in
C
B
V
Inches
Millimeters
E
ANODE
Dimension
Min
Max
Min
Max
9.40
8.41
.331
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
9.14
9.65
4.52
0.64
1.14
7. 01
.276
A
10.67
4.78
0.89
1.52
1.91
2.67
2.59
0.61
2.79
15.88
1.14
S
W
U
J
K
GATE
CATHODE
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
8.13
.320
G
H
D
G
H
J
F
11.68
.460
2.16
.085
K
S
7. 01
.276
7. 01
.276
V
16.89
.665
U
W
0.25
1.78
8.89
.350
1.40
.055
3.81
.150
2.03
.080
6.60
.260
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
400V
X
600V
X
SJxx16L
SJxx16R
30mA
30mA
30mA
6mA
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
TO-220L
TO-220R
TO-263
X
X
SJxx16N
X
X
SJxx16L1
X
X
TO-220L
TO-220R
TO-263
SJxx16R1
X
X
6mA
SJxx16N1
X
X
6mA
SJxx16L2
X
X
10mA
10mA
10mA
TO-220L
TO-220R
TO-263
SJxx16R2
X
X
SJxx16N2
X
X
Note: xx = Voltage/10
Packing Options
Part Number
SJxx16LxTP
SJxx16RxTP
SJxx16NxTP
SJxx16NxRP
Marking
SJxx16Lx
SJxx16Rx
SJxx16Nx
SJxx16Nx
Weight
2.2g
2.2g
1.6g
Packing Mode
Base Quantity
500 (50 per tube)
500 (50 per tube)
500 (50 per tube)
500
Tube
Tube
Tube
1.6g
Embossed Carrier
Note: xx=voltage/10, x=sensitivity
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 12/11/18
Thyristors
16 Amps High Junction Temperature SCRs
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
0.059
(1.5)
DIA
Cathode
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
Part Marking System
TO-220 AB - (L and R Package)
TO-263 AB - (N Package)
SJ 60 16 L 1
TP
PACKING TYPE
COMPONENT TYPE
SJ: high temperature SCR
TP:Tube Pack
RP: Reel Pack
SENSITIVITY &TYPE
[blank]: 30mA
VOLTAGE RATING
SJ6016R1
YM
Sxx16R
40: 400V
60: 600V
1: 6mA
2: 10mA
®
PACKAGETYPE
CURRENT RATING
16: 16A
L:TO-220 Isolated
R:TO-220 Non-Isolated
N:TO-263 (D2-Pak)
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each
product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at
http://www.littelfuse.com/disclaimer-electronics.
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 12/11/18
相关型号：
UL1042
UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowegoWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV201
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14
IC-SM-VIDEO AMPWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TA
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TC
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV302N16
IC-SM-4:1 MUX SWITCHWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV4089
VIDEO AMPLIFIER WITH DC RESTORATIONWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
©2020 ICPDF网 联系我们和版权申明