SK010VRP [LITTELFUSE]
Silicon Controlled Rectifier, TO-251AA, ROHS COMPLIANT, PLASTIC, TO-251, VPAK-3;
| 型号： | SK010VRP |
| 厂家： | 
LITTELFUSE |
| 描述： | Silicon Controlled Rectifier, TO-251AA, ROHS COMPLIANT, PLASTIC, TO-251, VPAK-3 |
| 文件： | 总10页 (文件大小：228K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Sxx10xSx & Sxx10x Series
Description
Excellent unidirectional switches for phase control and
general switching applications such as heating and motor
speed controls.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
tꢀ
tꢀ
3P)4ꢀDPNQMJBOU
tꢀ
7PMUBHFꢀDBQBCJMJUZꢀVQꢀ
to 1000 V
(MBTTꢀoꢀQBTTJWBUFEꢀ
junctions
tꢀ
4VSHFꢀDBQBCJMJUZꢀVQꢀ
to 100 A
Agency Approval
Agency
Agency File Number
Applications
TO-220L Package : E71639
®
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also
controls for power tools, home/brown goods and white
goods appliances.
Main Features
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Symbol
IT(RMS)
Value
10
Unit
A
V
VDRM/VRRM
IGT
400 to 1000
0.2 to 15
Schematic Symbol
mA
A
K
G
Absolute Maximum Ratings — Sensitive SCRs
Symbol
Parameter
Test Conditions
Value
Unit
Sxx10LSy
TC = 80°C
Sxx10RSy
Sxx10DSy
Sxx10VSy
IT(RMS)
RMS on-state current
10
A
TC = 95°C
single half cycle; f = 50Hz;
83
T (initial) = 25°C
J
ITSM
Peak non-repetitive surge current
A
single half cycle; f = 60Hz;
100
T (initial) = 25°C
J
I2t
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3 ms
41
100
A2s
A/μs
A
di/dt
IGM
f = 60 Hz ;T = 110°C
J
1
T = 110°C
J
PG(AV)
Tstg
Average gate power dissipation
Storage temperature range
0.1
W
T = 110°C
J
-40 to 150
-40 to 110
°C
T
Operating junction temperature range
°C
J
Note: xx = voltage, y = sensitivity
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
239
Revised: July 9, 2008
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Standard SCRs
Symbol
Parameter
Test Conditions
Sxx10L
Value
Unit
TC = 100°C
TC = 110°C
Sxx10R
Sxx10D
Sxx10V
IT(RMS)
RMS on-state current
10
A
single half cycle; f = 50Hz;
T (initial) = 25°C
83
singleJhalf cycle; f = 60Hz;
ITSM
Peak non-repetitive surge current
A
100
T (initial) = 25°C
J
I2t
I2t Value for fusing
Critical rate-of-rise of on-state current
Peak gate current
tp = 8.3 ms
41
100
A2s
A/μs
A
di/dt
IGM
f = 60 HzT = 125°C
J
2
T = 125°C
J
PG(AV)
Tstg
Average gate power dissipation
Storage temperature range
0.5
W
T = 125°C
J
-40 to 150
-40 to 125
°C
T
Operating junction temperature range
°C
J
Note: xx = voltage
Electrical Characteristics (T = 25°C, unless otherwise specified) – Sensitive SCRs
J
Value
Symbol
Test Conditions
Unit
Sxx10xS2
Sxx10xS3
IGT
MAX.
MAX.
TYP.
200
500
μA
V
VD = 6V RL = 100 8
VGT
dv/dt
VGD
VGRM
IH
0.8
8
VD = VDRM; RGK = 1k8 ; T = 110°C
V/μs
V
J
VD = VDRM; RL = 3.3 k8; T = 110°C
MIN.
MIN.
MAX.
MAX.
TYP.
0.2
6
J
IGR = 10μA
V
IT = 20mA (initial)
6
50
4
8
45
5
mA
μs
μs
tq
(1)
tgt
IG = 2 x IGT; PW = 15ꢀs; IT = 12A
NOTE: xx = voltage, x = package
(1) IT=2A; tp=50ꢀs; dv/dt=5V/ꢀs; di/dt=-30A/ꢀs
Electrical Characteristics (T = 25°C, unless otherwise specified) – Standard SCRs
J
Value
Sxx10x
15
Symbol
Test Conditions
Unit
IGT
MAX.
MAX.
mA
V
VD = 12V RL = 60 8
VGT
1.5
400V
600V
800V
1000V
400V
600V
800V
350
300
250
100
250
225
200
0.2
VD = VDRM; gate open; T = 100°C
J
dv/dt
MIN.
V/μs
VD = VDRM; gate open; T = 125°C
J
VGD
IH
VD = VDRM; RL = 3.3 k8; T = 125°C
MIN.
MAX.
MAX.
TYP.
V
mA
μs
J
IT = 200mA (initial)
30
tq
(1)
35
tgt
IG = 2 x IGT; PW = 15ꢀs; IT = 20A
2
μs
NOTE: xx = voltage, x = package
(1) IT=2A; tp=50ꢀs; dv/dt=5V/ꢀs; di/dt=-30A/ꢀs
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
240
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised: July 9, 2008
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Static Characteristics
Symbol
Test Conditions
Value
1.6
Unit
VTM
IT = 20A; tp = 380 ꢀs
MAX.
MAX.
V
T = 25°C
400 - 600V
400 - 600V
400 - 800V
1000V
5
J
Sxx10xyy
T = 110°C
250
10
J
T = 25°C
J
IDRM / IRRM
VDRM / VRRM
20
μA
Sxx10x
400 - 800V
1000V
200
3000
500
T = 100°C
J
T = 125°C
400 - 800V
J
Note: xx = voltage, x = package, yy = sensitivity
Thermal Resistances
Symbol
Parameter
Value
1.6
Unit
Sxx10RSy
Sxx10LSy
Sxx10VSy
Sxx10DSy
Sxx10R
3.0
1.7
1.45
1.6
Junction to case (AC)
°C/W
RR(J-C)
Sxx10L
3.0
1.7
Sxx10V
Sxx10D
1.45
40
Sxx10RSy
Sxx10LSy
Sxx10VSy
Sxx10R
65
85
Junction to ambient
°C/W
RR(J-A)
40
Sxx10L
50
Sxx10V
70
Note: xx = voltage, y = sensitivity
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
241
Revised: July 9, 2008
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature (Sensitive SCR)
Figure 2: Normalized DC GateTrigger Current
vs. JunctionTemperature (Standard SCR)
4.0
3.0
2.0
1.0
0.0
4.0
3.0
2.0
1.0
0.0
-40
-15
10
35
60
85
110
125
-40
-15
10
35
60
85
110
125
1.6
JunctionTemperature (TJ) -- (°C)
JunctionTemperature (TJ) -- (°C)
Figure 3: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
Figure 4: Normalized DC Holding Current
vs. JunctionTemperature
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
-40
-15
10
35
60
85
110
JunctionTemperature (TJ) -- (°C)
JunctionTemperature (TJ) -- (°C)
Figure 5: On-State Current vs. On-State
Voltage (Typical)
Figure 6: Power Dissipation (Typical) vs. RMS
On-State Current
10
9
8
7
6
5
4
3
2
1
0
32
TJ = 25ºC
28
24
20
16
12
8
4
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0
1
2
3
4
5
6
7
8
9
10
Instantaneous On-stateVoltage (vT) –Volts
RMS On-State Current [IT(RMS)] -- (Amps)
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
242
Revised: July 9, 2008
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Figure 7: Maximum Allowable CaseTemperature
vs. RMS On-State Current
Figure 8: Maximum Allowable CaseTemperature
vs. Average On-State Current
130
125
120
115
110
105
100
95
130
125
120
Sxx10R
Sxx10R
Sxx10D
Sxx10V
Sxx10L
Sxx10D
Sxx10V
Sxx10L
115
110
105
Sxx10RSy
Sxx10DSy
Sxx10VSy
100
Sxx10RSy
Sxx10DSy
95
Sxx10VSy
90
90
Sxx10LSy
Sxx10LSy
85
85
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
80
80
75
75
70
70
0
1
2
3
4
5
6
7
8
9
10
11
0
1
2
3
4
5
6
7
RMS On-State Current [IT(RMS)] - Amps
Average On-State Current [IT(AVE)] - Amps
Figure 9: Maximum Allowable AmbientTemperature
vs. RMS On-State Current
Figure 10: Maximum Allowable AmbientTemperature
vs. Average On-State Current
120
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx10R
Sxx10R
100
100
80
60
40
20
0
Sxx10L
Sxx10L
80
Sxx10V
Sxx10RSy
Sxx10RSy
Sxx10LSy
Sxx10V
Sxx10LSy
60
40
Sxx10VSy
Sxx10VSy
20
0
0.0
0.5
1.0
1.5
0.0
0.5
1.0
1.5
2.0
2.5
Average On-State Current [IT(AVE)] - Amps
Average On-State Current [IT(AVE)] - Amps
Note: xx = voltage, y = sensitivity
Figure 11: Peak Capacitor Discharge Current
Figure 12: Peak Capacitor Discharge Current Derating
1.2
1.0
0.8
0.6
1000
100
0.4
Standard SCR
Sensitive SCR
ITRM
0.2
0.0
tW
10
0
25
50
75
100
125
150
0.5
1.0
10.0
50.0
Pulse Current Duration (tW) - ms
CaseTemperature (TC) - °C
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
243
Revised: July 9, 2008
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Figure 13: Surge Peak On-State Current vs. Number of Cycles
1000
100
10
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
1
1
10
100
1000
Surge Current Duration -- Full Cycles
Soldering Parameters
Reflow Condition
Pb – Free assembly
150°C
tP
TP
-Temperature Min (Ts(min)
)
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
-Time (min to max) (ts)
)
200°C
tL
60 – 190 secs
Ramp-down
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
-Temperature (TL) (Liquidus) 217°C
25
Reflow
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
244
Revised: July 9, 2008
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature Cycling
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Thermal Shock
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
400V
X
600V
X
800V
1000V
Sxx10RS2
Sxx10LS2
Sxx10VS2
Sxx10DS2
Sxx10RS3
Sxx10LS3
Sxx10VS3
Sxx10DS3
Sxx10R
0.2mA
0.2mA
0.2mA
0.2mA
0.5mA
0.5mA
0.5mA
0.5mA
15mA
15mA
15mA
15mA
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
TO-220R
TO-220L
TO-251
TO-252
TO-220R
TO-220L
TO-251
TO-252
TO-220R
TO-220L
TO-251
TO-252
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Sxx10L
X
X
Sxx10V
X
X
Sxx10D
X
X
Note: xx = Voltage
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
245
Revised: July 9, 2008
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Dimensions —TO-251AA (V/I-Package) —V/I-PAKThrough Hole
AREA: 0.040 IN2
Inches
Millimeters
Min
TC MEASURING POINT
Dimension
Min
Max
0.050
0.245
0.375
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
Max
1.27
6.22
9.53
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
E
H
J
5.28
.208
D
A
B
C
D
E
F
G
H
I
0.040
0.235
0.350
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
1.02
5.97
8.89
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
ANODE
A
B
5.34
.210
K
C
J
ANODE
GATE
CATHODE
L
F
K
L
G
I
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount
E
D
5.28
.208
TC MEASURING POINT
L
O
ANODE
H
K
J
A
B
5.34
.210
M
N
C
Inches
Millimeters
Min
GATE
F
CATHODE
Dimension
AREA: 0.040 IN2
Min
0.040
0.235
0.106
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
0.000
0.021
0°
Max
0.050
0.245
0.113
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
0.004
0.027
5°
Max
1.27
6.22
2.87
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
0.10
0.69
5°
G
A
B
C
D
E
F
1.02
5.97
2.69
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
0.00
0.53
0°
I
Pad Layout forTO-252AA (D-Package)
6.71
.264
6.71
.264
G
H
I
1.60
.063
1.80
.071
J
K
L
3
.118
4.60
.181
M
N
O
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
246
Revised: July 9, 2008
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
ANODE
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
B
C
13.36
.526
D
7. 01
.276
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
247
Revised: July 9, 2008
Teccor® brandThyristors
10 Amp Sensitive & Standard SCRs
Packing Options
Part Number
Sxx10L/Ryy
Sxx10L/RyyTP
Sxx10DyyTP
Sxx10DyyRP
Sxx10VyyTP
Sxx10VyyRP
Sxx10L/R
Marking
Sxx10L/Ryy
Sxx10L/Ryy
Sxx10Dyy
Sxx10Dyy
Sxx10Vyy
Sxx10Vyy
Sxx10L/R
Sxx10L/R
Sxx10D
Weight
2.2 g
2.2 g
0.3 g
0.3 g
0.4 g
0.4 g
2.2 g
2.2 g
0.3 g
0.3 g
0.4 g
0.4 g
Packing Mode
Base Quantity
500
Bulk
Tube
500
Tube
750
Embossed Carrier
Tube
2500
750
Embossed Carrier
Bulk
2500
500
Sxx10L/RTP
Sxx10DTP
Tube
500
Tube
750
Sxx10DRP
Sxx10D
Embossed Carrier
Tube
2500
750
Sxx10VTP
Sxx10V
Sxx10VRP
Sxx10V
Embossed Carrier
2500
Note: xx = Voltage; yy = Sensitivity
TO-252 Embossed Carrier Reel Pack (RP) Specifications
0.157
(4.0)
Meets all EIA-481-2 Standards
0.059
Dia
(1.5)
Gate
MT1 / Cathode
0.63
(16.0)
0.524
(13.3)
*
0.315
(8.0)
*
Cover tape
MT2 / Anode
12.99
(330.0)
0.512 (13.0) Arbor
Dimensions
are in inches
Hole Dia.
(and millimeters).
0.64
(16.3)
Direction of Feed
Part Numbering System
S 60 10 L S2 56
Part Marking System
TO-251AA – (V Package)
TO-252AA – (D Package)
TO-220AB - (R & L Packages)
DEVICE TYPE
S : SCR
LEAD FORM DIMENSIONS
xx Lead Form Option
:
Sxx10L
VOLTAGE RATING
40 : 400V
60 : 600V
80: 800V
K0 : 1000V
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200μA
S3: 500μA
Standard SCR:
(blank): 15mA
yxxxx
®
PACKAGE TYPE
CURRENT
10: 10A
L : TO-220 Isolated
R : TO-220 Non-Isolated
V : TO-251 (VPAK)
D : TO-252 (DPAK)
Sxx10xSx & Sxx10x Series
©2008 Littelfuse, Inc.
248
Revised: July 9, 2008
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
相关型号：
SK010VTP
Silicon Controlled Rectifier, 10A I(T)RMS, 6400mA I(T), 1000V V(DRM), 1000V V(RRM), 1 Element, TO-251AA, ROHS COMPLIANT, PLASTIC, VPAK-3
LITTELFUSE
SK012DRP
Silicon Controlled Rectifier, 12A I(T)RMS, 1000V V(DRM), 1000V V(RRM), 1 Element, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
LITTELFUSE
SK012DTP
Silicon Controlled Rectifier, 12A I(T)RMS, 1000V V(DRM), 1000V V(RRM), 1 Element, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
LITTELFUSE
SK012DTP56
Silicon Controlled Rectifier, 12A I(T)RMS, 1000V V(DRM), 1000V V(RRM), 1 Element, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明