SL1003A230C [LITTELFUSE]
Surge Protection Circuit, PACKAGE-3;
| 型号： | SL1003A230C |
| 厂家： | 
LITTELFUSE |
| 描述： | Surge Protection Circuit, PACKAGE-3 电信 电信集成电路 |
| 文件： | 总5页 (文件大小：677K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Gas DischargeTubes
SL1003A Series
RoHS
SL1003A Series
Description
The SL1003A series has been especially developed
for Broadband equipment. Special design features
provide high levels of protection against fast rising
transients in the 100V/μs to 1kV/μs range usually
caused by lightning disturbances.
These devices have ultra low capacitance 1.5pF and
present insignificant signal losses up to 1.5GHz.
These devices are extremely robust and are able to
divert a 5000A pulse without destruction. For AC
Power Cross of long duration, over-current protection
is recommended.
Agency Approvals
Features
• RoHS compliant
• Low insertion loss
• Surface mountable
• Can be used to meet
Telcordia GR1089
without series
AGENCY
AGENCY FILE NUMBER
E128662
resistance
• 5kA surge capability
tested with 8/20/μs
pulse as defined by IEC
61000-4-5
• 10/700 6kV capability,
as per ITU-Tk.21,
enhanced test level
3 Electrode GDT Graphical Symbol
• 2000 Amp 2/10μs surge
rating
• GHz working frequency
• Excellent response to
fast rising transients
Additional Information
Applications
• Broadband equipment
• ADSL equipment
• XDSL equipment
• Satellite and CATV
equipment
• General telecom
equipment
Datasheet
ꢀesꢁurces
ꢀaꢁꢂꢃes
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
Gas DischargeTubes
SL1003A Series
Electrical Characteristics
Device Specifications (at 25°C)
Impulse Impulse Insulation Capaci-
Life Ratings
DC Breakdown
Arc
Voltage
(on state
Voltage)
@1Amp Min
Surge
Life
Nominal
Impulse
Discharge
Current
Nominal
AC
DC
Max Impulse
Discharge
Current
in Volts1,2,3
Breakdown Breakdown Resistance tance
AC
Discharge
Holdover
in Volts2,3
In Volts2,3
Discharge
Current
Current
(9 Cycles @
50Hz)
Voltage4
Part Number
(@100V/s)
(@1MHz
0V Bias)
(@200A
10/1000µs)
(@100V/µs)
(@1kV/µs)
(1 Application)
(10x1s
@50Hz)
(8/20µs)
MIN TYP MAX
MAX
MIN
MAX
TYP
TYP
@ 10/350µs
109Ω
(at 50V)
SL1003A090 72 90 108
700
750
50 V
SL1003A230 184 230 276
SL1003A250 200 250 300
SL1003A260 210 260 310
SL1003A300 240 300 360
SL1003A350 280 350 420
SL1003A400 320 400 480
SL1003A450 360 450 540
SL1003A500 400 500 600
600
~10 to
35 V
300
shots
10 shots
(@10kA)
1.5 pF
10 A
30 A
2 kA
109Ω
(at 100V)
750
800
850
900
1100
850
900
135 V
950
1000
1400
Notes:
1. At delivery AQL 0.65 level II, DIN ISO 2859
2. In ionized mode, tested according to ITU-T Rec. K.12
3. Comparable to the silicon measurement Switching Voltage (Vs)
4. Reference REA PE-80, 0.2A. Tested to ITU-T Rec. K.12 and REA PE-80 < 150 msecs.
Product Characteristics
Leaded Device:
Glow to Arc
~1 Amp
Materials
Tin-plated copper wire
Transition Current
Core and Surface Mount: DullTin-plated
GlowVoltage
~60 to 200 Volts
-40 to +90°C
Littelfuse 'LF' Mark, voltage and date
code
Product Marking
Storage and
Operational
Temperature
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
Gas DischargeTubes
SL1003A Series
Device Dimensions
Dimensions are in millimeters [and inches]
For SL1003A series:
'R' Type Radial Lead Devices (SL1003AxxxR-001)
'C' Type Core Devices
PROFILE VIEW
TOP VIEW
12.2 - 0.2
[0.480 - 0.07ꢀ]
Ø6.0 0.1
[0.236 0.03ꢀ]
PROFILE VIEW
TOP VIEW
8.1 0.2
[0.236 0.03ꢀ]
8.ꢀ 0.2
[0.3ꢀꢁ 0.00ꢂꢁ]
Ø6.0 0.ꢀ
[0.236 0.003ꢁ]
4.3 + 1.5
[0.16ꢀ + 0.05ꢀ]
6.0 0.5
[0.236 0.020]
4.4 0.3
[0.173 0.012]
4.4 0.3
[0.173 0.012]
0.8 DIA.
[0.031]
'R' Type Radial Lead Devices (SL1003AxxxR and SL1003AxxxRF)
'SM' Type Surface Mount Devices
PROFILE VIEW
TOP VIEW
TOP VIEW
12.2 - 2
[ꢀ.48ꢀ - ꢀ.ꢀ7ꢁ9
PROFILE VIEW
6.ꢀ ꢀ.1
[ꢀ.236 ꢀ.ꢀ3ꢁ9
6.0 0.ꢀ
8.1 0.2
[0.319 0.0079]
3.20
8.1 ꢀ.2
[ꢀ.236 ꢀ.ꢀ3ꢁ9
[0.126]
2.8
[0.110]
2.8
[0.110]
1.5
[0.059]
Ø
0
0
4.3 + 1.5
[ꢀ.16ꢁ + ꢀ.ꢀ5ꢁ9
6.ꢀ ꢀ.5
[ꢀ.236 ꢀ.ꢀ2ꢀ9
0.5
[0.019]
3.ꢁ ꢀ.3
[ꢀ.154 ꢀ.ꢀ129
3.ꢁ ꢀ.3
[ꢀ.154 ꢀ.ꢀ129
ꢀ.8 DIA.
[ꢀ.ꢀ319
TOP VIEW
2.20
[0.087]
1.20
[0.04]
1.20
[0.047]
PROFILE VIEW
TOP VIEW
12.2 - 2
[ꢀ.48ꢀ - ꢀ.ꢀ7ꢁ9
6.ꢀ ꢀ.1
[ꢀ.236 ꢀ.ꢀ3ꢁ9
1.2 Max
[ꢀ.ꢀ479
8.1 ꢀ.2
[ꢀ.236 ꢀ.ꢀ3ꢁ9
7.00
[0.275]
6.000
[0.236]
allow space
for product
clearance
6.7 ꢀ.5
[ꢀ.263 ꢀ.ꢀ2ꢀ9
2.10
2.10
[0.083] [0.083]
6.40
[0.252]
4.3 + 1.5
[ꢀ.16ꢁ + ꢀ.ꢀ5ꢁ9
6.ꢀ ꢀ.5
[ꢀ.236 ꢀ.ꢀ2ꢀ9
7.60
[0.299]
8.80
[0.346]
3.ꢁ ꢀ.3
[ꢀ.154 ꢀ.ꢀ129
3.ꢁ ꢀ.3
[ꢀ.154 ꢀ.ꢀ129
ꢀ.8 DIA.
[ꢀ.ꢀ319
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
Gas DischargeTubes
SL1003A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
tP
Reflow Condition
-Temperature Min (Ts(min)
Pb-free assembly
TP
Critical Zone
L to TP
Ramp-up
T
)
150°C
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (Min to Max) (ts)
60 – 180 seconds
Ramp-down
Average Ramp-up Rate (LiquidusTemp
(TL) to peak)
Preheat
3°C/second max.
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max.
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
(t 25ºC to peak)
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of Actual Peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max.
8 minutes max.
260°C
Time 25°C to PeakTemperature (TP)
Do not exceed
Soldering Parameters -Wave Soldering (Thru-Hole Devices)
300
280
260
240
220
200
180
160
140
120
100
80
Recommended Process Parameters:
Wave Parameter
Lead-Free Recommendation
Preheat:
(Typical Industry Recommendation)
(Depends on Flux ActivationTemperature)
Temperature Minimum:
Temperature Maximum:
PreheatTime:
100° C
150° C
60-180 seconds
Solder PotTemperature:
Solder DwellTime:
280° C Maximum
2-5 seconds
60
40
20
0
Time (Seconds)
Preheat Time
Cooling Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder IronTemperature: 350° C +/- 5°C
HeatingTime: 5 seconds max.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
Gas DischargeTubes
SL1003A Series
Packaging
'C' Type Core Items: Package bulk pack in polybag, 500 pcs/bag
'R' and ‘RF’ Type Radial Lead Items: Packed in tray, 100 pcs/tray
'SM' Type Surface Mount Items: Packaged tape and reel carrier, 700 pcs/reel (specifications below)
Dimensions are in millimeters [and inches]
Dimensions are in millimeters [and inches]
ꢀ0x4 0.ꢀ ꢁ 40 0.1
[ꢀ0x0.ꢀ57 0.004 ꢁ ꢀ.575 0.00ꢂ2
Øꢀ.5 +0.ꢀ
[0.059 +0.00392
Øꢀ.5 +0.ꢀ
[0.059 +0.00392
Ø4 0.ꢀ
Ø1 0.ꢀ
0.4 0.05
[0.016 0.0020]
275.0
[10.83]
[0.ꢀ57 0.00392 [0.079 0.00392
3 [0.118]
100.0
[3.94]
76.0
[2.99]
25.0
[0.98]
17.7
[0.697]
Direction of Feed
ꢀ1 0.ꢀ
[0.471 0.00392
7.4 0.1
[0.291 0.0039]
3
9
[0.ꢀꢀꢂ2
[0.3542
6.ꢀ 0.ꢀ
[0.140 0.00392
R0.3 typical
[0.012]
SMD-tape according to IEC 601ꢂ6-3
Part Numbering System and Ordering Information
SL1003 A XXX XX
Type 3 Pole Arrestor
Voltage
Pin Configuration
C
R
= Core type (Packed in polybag, 500pcs/bag)
= Radial Lead without Failsafe (Packed in tray, 100pcs/tray)
RF = Radial Lead with Failsafe (Packed in tray, 100pcs/tray)
SM= Surface Mount (Packed in carrier and tape, 700pcs/reel)
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete
Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/12/17
相关型号：
©2020 ICPDF网 联系我们和版权申明