SL1011A230A [LITTELFUSE]
Gas Discharge Tube (GDT) Products;
| 型号： | SL1011A230A |
| 厂家： | 
LITTELFUSE |
| 描述： | Gas Discharge Tube (GDT) Products 电信 电信集成电路 |
| 文件： | 总6页 (文件大小：420K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Gas DischargeTube (GDT) Products
SL1011A/B and SL1411A Series
®
SL1011A/B and SL1411A Series
Description
The SL1011A/B and SL1411A series provides high
levels of protection against fast rising transients
in the 100V/ꢀs to 1kV/ꢀs range usually caused by
lightning disturbances.
The SL1011A/B and SL1411A series offers low
capacitance (< 1.5pf) which provides low insertion
loss at high frequencies.
SL1011A offers 5kA protection without destruction
whereas the SL1011B and SL1411A offer 10kA surge
protection without destruction (maximum single
surge of 12kA @ 8/20ꢀs).
Agency Approvals
Features
AGENCY
AGENCY FILE NUMBER
• RoHS compliant
• 5kA (SL1011A) or 10kA
(SL1011B & SL1411A)
surge capability tested
with 8/20μs
pulse as defined by
IEC 61000-4-5
®
E128662
• Low insertion loss
• Excellent response to
fast rising transients
2 Electrode GDT Graphical Symbol
• Ultra low capacitance
Applications
• Broadband equipment
• ADSL equipment
• XDSL equipment
• Satellite and CATV
equipment
• General telecom
equipment
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
47
Revised: June 28, 2010
SL1011A/B and SL1411A Series
Customer should verify actual device performance in their specific applications.
Gas DischargeTube (GDT) Products
SL1011A/B and SL1411A Series
Electrical Characteristics
Device Specifications (at 25°C)
Impulse Impulse Insulation Capaci-
Life Ratings
DC Breakdown
in Volts1,2
Arc
Voltage
(on state
Voltage)
@1Amp Min
Surge
Life
Nominal
Impulse
Discharge
Current
Nominal
AC
Discharge
Current
(10x1s
AC
DC
Max Impulse
Discharge Current
Breakdown Breakdown Resistance tance
Dischage Holdover
in Volts3
In Volts
Current
(9 Cycles @
50Hz)
Voltage4
Part Number
(@100V/s)
(@1MHz)
(1 Application)
(@100A
10/1000ꢀs)
(@100V/ꢀs)
(@1kV/ꢀs)
(8/20ꢀs)
@50-60Hz)
MIN TYP MAX
MAX
MIN
MAX
TYP
TYP
@ 8/20μs
@ 10/350μs
6/ꢀꢁꢀꢀ$ꢁꢂꢃ
6/ꢀꢁꢀꢀ%ꢁꢂꢃ ꢄꢁ ꢂꢃ ꢅꢁ
6/ꢀꢎꢀꢀ$ꢁꢂꢃ
ꢃꢁꢁ
ꢂꢁꢁ
ꢄꢁꢁ
ꢀꢁꢀꢁꢆȍ
ꢇDWꢆꢃꢁ9ꢈ
6/ꢀꢁꢀꢀ$ꢁꢅꢁ
6/ꢀꢁꢀꢀ%ꢁꢅꢁ ꢂꢊ ꢅꢁ ꢀꢁꢏ
6/ꢀꢎꢀꢀ$ꢁꢅꢁ
ꢃꢁꢁ
ꢃꢁꢆ9
6/ꢀꢁꢀꢀ$ꢀꢎꢃ
ꢀꢀꢄ ꢀꢎꢃ ꢀꢂꢎ
6/ꢀꢁꢀꢀ%ꢀꢎꢃ
ꢃꢁꢁ
ꢃꢁꢁ
ꢄꢃꢁ
ꢄꢃꢁ
6/ꢀꢁꢀꢀ$ꢀꢃꢁ
ꢀꢊꢁ ꢀꢃꢁ ꢀꢏꢁ
6/ꢀꢁꢀꢀ%ꢀꢃꢁ
6/ꢀꢁꢀꢀ$ꢌꢆ
ꢀꢁꢆVKRWVꢆ
ꢇ#ꢃN$ꢈ
6/ꢀꢁꢀꢀ$ꢊꢋꢁ
6/ꢀꢁꢀꢀ$ꢌꢆ
ꢃꢆ$
6/ꢀꢁꢀꢀ$ꢌꢆ
ꢊꢁꢆ$
6/ꢀꢁꢀꢀ%ꢊꢋꢁ ꢀꢏꢎ ꢊꢋꢁ ꢊꢂꢄ
6/ꢀꢎꢀꢀ$ꢊꢋꢁ
ꢃꢃꢁ
ꢂꢁꢁ
6/ꢀꢁꢀꢀ%ꢆ
ꢍꢆ
6/ꢀꢎꢀꢀ$ꢌꢆ
ꢀꢊꢆN$
ꢋꢁꢁ
VKRWV
ꢀꢉꢃꢆS) aꢊꢁꢆ9
ꢀꢆN$ꢆ
6/ꢀꢁꢀꢀ%ꢆꢍꢆ 6/ꢀꢁꢀꢀ%ꢆꢍꢆ 6/ꢀꢁꢀꢀ%ꢆꢍꢆ
6/ꢀꢁꢀꢀ$ꢊꢃꢁ
6/ꢀꢎꢀꢀ$ꢌꢆ
ꢀꢁꢆVKRWVꢆ
ꢇ#ꢀꢁN$ꢈ
6/ꢀꢎꢀꢀ$ꢌꢆ
ꢀꢁꢆ$
6/ꢀꢎꢀꢀ$ꢌꢆ
ꢄꢃꢆ$
6/ꢀꢁꢀꢀ%ꢊꢃꢁ ꢊꢁꢁ ꢊꢃꢁ ꢋꢁꢁ
6/ꢀꢎꢀꢀ$ꢊꢃꢁ
ꢄꢁꢁ
ꢄꢁꢁ
ꢏꢁꢁ
ꢏꢁꢁ
ꢏꢁꢁ
ꢅꢁꢁ
ꢀꢁꢀꢁꢆȍ
ꢇDWꢆꢀꢁꢁ9ꢈ
6/ꢀꢁꢀꢀ$ꢊꢄꢁ
ꢊꢀꢁ ꢊꢄꢁ ꢋꢀꢁ
6/ꢀꢁꢀꢀ%ꢊꢄꢁ
ꢀꢋꢃꢆ9
6/ꢀꢁꢀꢀ$ꢋꢃꢁ
6/ꢀꢁꢀꢀ%ꢋꢃꢁ ꢊꢏꢁ ꢋꢃꢁ ꢎꢊꢁ
6/ꢀꢎꢀꢀ$ꢋꢃꢁ
6/ꢀꢁꢀꢀ$ꢎꢂꢁ
ꢋꢂꢄ ꢎꢂꢁ ꢃꢄꢎ
6/ꢀꢎꢀꢀ$ꢎꢂꢁ
ꢀꢁꢁꢁ
ꢀꢀꢁꢁ
ꢀꢊꢁꢁ
ꢀꢀꢁꢁ
ꢀꢊꢁꢁ
ꢀꢎꢁꢁ
6/ꢀꢁꢀꢀ$ꢃꢁꢁ ꢎꢁꢁ ꢃꢁꢁ ꢄꢁꢁ
6/ꢀꢁꢀꢀ$ꢄꢁꢁ
ꢎꢏꢁ ꢄꢁꢁ ꢂꢊꢁ
6/ꢀꢎꢀꢀ$ꢄꢁꢁ
Notes:
1. At delivery AQL 0.65 level II, DIN ISO 2859
2. In ionized mode
3. Comparable to the silicon measurement Switching Voltage (Vs)
4. Tested according to ITU-T Rec. K.12 < 150 msecs.
Product Characteristics
Leaded Device: Nickel-plated withTin-
plated wires
Glow to Arc
< 0.5 Amps
~60 Volts
Materials
Transition Current
Core and Surface Mount: DullTin-plated
GlowVoltage
Littelfuse 'LF' Mark, voltage and date
code
Product Marking
Storage and
Operational
Temperature
-40 to +90°C
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
48
Revised: June 28, 2010
SL1011A/B and SL1411A Series
Customer should verify actual device performance in their specific applications.
Gas DischargeTube (GDT) Products
SL1011A/B and SL1411A Series
Device Dimensions
For SL1011A/SL1011B series:
'A' Type Axial Lead Devices
'C' Type Core Devices
TOP VIEW
PROFILE VIEW
SEMI–PROFILE VIEW
PROFILE VIEW
TOP VIEW
Ø8.0 0.2
[0.315 0.0079]
6.05 0.2
[0.238 0.0079]
Ø0.8
[0.031]
Ø8.0 0.2
[0.315 0.0079]
Ø
.
6.05 0.2
[0.238 0.0079]
62
2
For SL1411A series:
'A' Type Axial Lead Devices
'SM' Type Surface Mount Devices
PROFILE VIEW
TOP VIEW
PROFILE VIEW
SEMI–PROFILE VIEW
TOP VIEW
8.3 0.1
4 [0.157]
Ø1.0
[0.039]
5.55 [0.219]
6.05 0.2
+ 0.10
Ø8.0
– 0.30
[0.238 0.0079]
+ 0.0039
– 0.0118
[0.315
]
5
6.05 0.2
[0.238 0.0079]
Ø
0
1
62
2
0.5 0.1
SOLDER PAD LAYOUT
1.30 [0.051]
'C' Type Core Devices
7.00 [0.276]
TOP VIEW
PROFILE VIEW
SEMI–PROFILE VIEW
+ 0.10
Ø8.00
+ 0.20
– 0.30
6.05
– 0.15
+ 0.0039
– 0.0118
5.40 [0.213]
[0.315
]
+ 0.0079
– 0.0059
[0.238
]
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Customer should verify actual device performance in their specific applications.
49
SL1011A/B and SL1411A Series
Revised: June 28, 2010
Gas DischargeTube (GDT) Products
SL1011A/B and SL1411A Series
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
tP
Reflow Condition
-Temperature Min (Ts(min)
Pb-free assembly
TP
Critical Zone
L to TP
Ramp-up
T
)
150°C
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
-Time (Min to Max) (ts)
)
200°C
tL
60 – 180 seconds
Ramp-down
Average Ramp-up Rate (LiquidusTemp
(TL) to peak)
Preheat
3°C/second max.
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max.
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
(t 25ºC to peak)
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of Actual Peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max.
8 minutes max.
260°C
Time 25°C to PeakTemperature (TP)
Do not exceed
Soldering Parameters -Wave Soldering (Thru-Hole Devices)
300
280
260
240
220
200
180
160
140
120
100
80
Recommended Process Parameters:
Wave Parameter
Lead-Free Recommendation
Preheat:
(Typical Industry Recommendation)
(Depends on Flux ActivationTemperature)
Temperature Minimum:
Temperature Maximum:
PreheatTime:
100° C
150° C
60-180 seconds
Solder PotTemperature:
Solder DwellTime:
280° C Maximum
2-5 seconds
60
40
20
0
Time (Seconds)
Preheat Time
Cooling Time
Dwell Time
Soldering Parameters - Hand Soldering
Solder IronTemperature: 350° C +/- 5°C
HeatingTime: 5 seconds max.
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
50
Revised: June 28, 2010
SL1011A/B and SL1411A Series
Customer should verify actual device performance in their specific applications.
Gas DischargeTube (GDT) Products
SL1011A/B and SL1411A Series
Packaging Dimensions
For 'A' Type Axial Lead Items
Dimensions are in millimeters [and inches]
Dimensions are in millimeters [and inches]
< 1.2 Max. Lead Bend
254.0 - 356.0
[10.0 - 14.0]
< 0.7 Max.
+2
Direction of Feed
77.0 Max.
[3.03]
52.4
–1
+0.079
–0.039
[2.063
]
22.8
[0.898]
6
1
[0.236 0.039]
10 0.5 ꢀPitc
[0.394 0.020]
For 'SM' Type Surface Mount Items (SL1411A series only)
Dimensions are in millimeters [and inches]
Dimensions are in millimeters [and inches]
275.0
[10.83]
10x4 0.1 ꢁ 40 0.2
[10x0.157 0.004 ꢁ 1.575 0.008]
100.0
[3.94]
1.75 0.1
[0.069 0.004]
4
0.1
1.5 DIA. MAX.
[0.059]
0.4 0.05
[0.016 0.002]
76.0
[2.99]
[0.157 0.004]
25.0
[0.98]
7.5 0.1
[0.295 0.004]
8.5 0.1
[0.335 0.004]
17.7
[0.697]
16 +0.3 / -0.1
[0.630 +0.012 / -0.004]
Direction of Feed
1.5 DIA. MAX.
[0.059]
12 0.1
[0.472 0.004]
8.6 0.1
[0.339 0.004]
For 'C' Type Core Items: Packed in plastic bag (500 pcs)
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
51
SL1011A/B and SL1411A Series
Revised: June 28, 2010
Customer should verify actual device performance in their specific applications.
Gas DischargeTube (GDT) Products
SL1011A/B and SL1411A Series
Part Numbering System and Ordering Information
For SL1011A series:
SL1011A XXX X
Voltage
Pin Configuration
A = Axial Lead
C = Core
Remarks: Formed leads are available on request
For SL1011B series:
SL1011B XXX X
Voltage
Pin Configuration
A = Axial Lead
C = Core
Remarks: Formed leads are available on request
For SL1411A series:
SL1411 A XXX XX
Surge Capability
Voltage
Pin Configuration
A
C
= Axial Lead
= Core
SM= Surface Mount
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
52
SL1011A/B and SL1411A Series
Revised: June 28, 2010
Customer should verify actual device performance in their specific applications.
相关型号：
UL1042
UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowegoWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV201
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14
IC-SM-VIDEO AMPWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TA
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TC
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV302N16
IC-SM-4:1 MUX SWITCHWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV4089
VIDEO AMPLIFIER WITH DC RESTORATIONWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
©2020 ICPDF网 联系我们和版权申明