SMF160A-T13 [LITTELFUSE]
Transient Suppressor,;
| 型号： | SMF160A-T13 |
| 厂家： | 
LITTELFUSE |
| 描述： | Transient Suppressor, |
| 文件： | 总6页 (文件大小：1020K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TVS Diodes
Surface Mount – 200W > SMF Series
Pb e3
RoHS
SMF Series
Description
The SMF series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Uni-directional
SMF package is 50% smaller in footprint when compare
to SMA package and deliverying one of the low height
profiles (1.1mm) in the industry.
Bi-directional
Features
• 200W peak pulsepower
capability at 10/1000µs
waveform, repetition rate
(duty cycle): 0.01%
•Compatible with
industrial standard
package SOD-123FL
• Low profile: maximum
height of 1.1mm.
• Low inductance, excellent
clamping capability
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Fast response time:
typically less than 1.0ns
from 0 Volts to VBR min
• Glass passivated junction
• Built-in strain relief
• Plastic package is
flammability rated V-0 per
UL 94
Agency Approvals
Agency
Agnecy File Number
E230531
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol Value
Unit
8/20μs
1000
Peak Pulse Power Dissipation
atTA=25ºC (Note 1)
PPPM
W
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260°C
10/1000μs (Note 2)
200
• For surface mounted
applications to optimize
board space
Power Dissipation On Infinite Heat Sink at
TL=50ºC
PD
1
W
• Matte tin lead–free plated
• Halogen-free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/ JEDEC J-STD-
609A.01)
Thermal Resistance Junction- to- Ambient
RƟJA
220
°C/W
• High temperature
to reflow soldering
guaranteed:
Thermal Resistance Junction- to- Lead
OperatingTemperature Range
StorageTemperature Range
RƟJL
TJ
100
°C/W
°C
-65 to 150
260°C/430sec
TSTG -65 to 175
°C
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
Notes:
1. Non-repetitive current pulse, per Fig. 4 and derated above TJ (initial) =25ºC per Fig. 3.
2. SMF90A~SMF100A Peak Pulse Power Dissipation is 170W min, 200W typical @ 10/1000us
Functional Diagram
JESD201A per its table 4a • UL Recognized to UL
and 4c
• IEC-61000-4-2 ESD
497B as an Isolated Loop
Circuit Protector.
Bi-directional
30kV(Air), 30kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2
Cathode
Anode
Uni-directional
Applications
Additional Infomarion
SMF devices are ideal for the protection of I/O interfaces,
CC bus and other vulnerable circuit used in cellular
V
phones, portable devices, business machines, power
supplies and other consumer applications.
Datasheet
Samples
Resources
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/15/20
TVS Diodes
Surface Mount – 200W > SMF Series
Electrical Characteristics (TA=25°C unless otherwise noted)
Maximum
Clamping
Voltage @Ipp
VC (V)
Agency Approval
Maximum Peak
Pulse Current
Ipp (A)
Breakdown Voltage VBR
(Volts) @ IT
Reverse Stand Maximum Re-
off Voltage verse Leakage
Part Number
Uni
Marking Code
Uni
Test Current IT
(mA)
VR (V)
@ VR IR (µA)
10*1000us
Bi
Bi
HE
HG
HK
HM
HP
HR
HT
HV
HX
HZ
IE
IG
IK
IM
IP
IR
IT
MIN
6.40
MAX
7. 0 0
Uni
Bi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10*1000us
SMF5.0A SMF5.0CA
SMF6.0A SMF6.0CA
SMF6.5A SMF6.5CA
SMF7.0A SMF7.0CA
SMF7.5A SMF7.5CA
SMF8.0A SMF8.0CA
SMF8.5A SMF8.5CA
SMF9.0A SMF9.0CA
SMF10A SMF10CA
SMF11A SMF11CA
SMF12A SMF12CA
SMF13A SMF13CA
SMF14A SMF14CA
SMF15A SMF15CA
SMF16A SMF16CA
SMF17A SMF17CA
SMF18A SMF18CA
SMF20A SMF20CA
SMF22A SMF22CA
SMF24A SMF24CA
SMF26A SMF26CA
SMF28A SMF28CA
SMF30A SMF30CA
SMF33A SMF33CA
SMF36A SMF36CA
SMF40A SMF40CA
SMF43A SMF43CA
SMF45A SMF45CA
SMF48A SMF48CA
SMF51A SMF51CA
SMF54A SMF54CA
SMF58A SMF58CA
SMF60A SMF60CA
SMF64A SMF64CA
SMF70A SMF70CA
SMF75A SMF75CA
SMF78A SMF78CA
SMF85A SMF85CA
AE
AG
AK
AM
AP
AR
AT
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5.0
6.0
6.5
7. 0
7. 5
8.0
8.5
9.0
10
400
400
250
100
50
21.7
19.4
17. 9
16.7
15.5
14.7
13.9
13.0
11.8
11.0
10.1
9.3
8.6
8.2
7. 7
9.2
10.3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
6.67
7.37
7.22
7.98
11.2
7.78
8.60
12.0
8.33
9.21
12.9
8.89
9.83
25
13.6
9.44
10.40
11.10
10
14.4
AV
AX
AZ
BE
BG
BK
BM
BP
BR
BT
BV
BX
BZ
CE
CG
CK
CM
CP
CR
CT
CV
CX
CZ
DE
RG
RK
RM
RP
RR
RT
RV
RW
RX
SE
SG
SK
SM
SP
SR
ST
10.00
11.10
2.5
2.5
2.5
2.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
15.4
12.30
13.50
14.70
15.90
17.20
17. 0
12.20
13.30
14.40
15.60
16.70
17.80
11
18.2
19.9
12
13
21.5
14
23.2
24.4
26.0
27.6
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
222.00
231.00
247.00
272.00
309.00
15
16
18.90
20.0 0
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
111.00
122.00
133.00
144.00
167.00
178.00
189.00
201.00
209.00
224.00
246.00
279.00
17
7. 2
18
6.8
6.2
5.6
5.1
4.8
4.4
4.1
3.8
3.4
3.1
2.9
2.8
2.6
2.4
2.3
2.1
2.1
1.9
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
IV
IX
IZ
20
22
24
JE
JG
JK
JM
JP
JR
JT
JV
JX
JZ
KE
KG
KK
KM
KP
KR
KT
KV
-
26
28
30
33
36
40
43
45
48
51
82.4
87.1
54
58
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
292.0
304.0
324.0
356.0
405.0
60
-
64
-
70
1.7
-
75
1.6
-
78
1.6
-
85
1.5
-
SMF90A
SMF100A
SMF110A
SMF120A
SMF130A
SMF150A
SMF160A
SMF170A
SMF180A
SMF188A
SMF200A
SMF220A
-
-
-
-
-
-
-
-
-
-
-
-
-
90
1.2
-
-
100
110
120
130
150
160
170
180
188
200
220
250
1.1
-
-
1.1
-
-
1.0
-
-
1.0
-
-
0.8
0.8
0.7
0.7
0.7
0.6
0.6
0.5
-
-
-
-
-
-
-
SV
SX
SZ
-
-
-
-
-
-
SMF250A
TE
-
-
-Notes:
1. VBR measured after IT applied for 300µs, IT = square wave pulse or equivalent.
2. Surge current waveform per 10/1000µs exponential wave and derated per Fig.2.
3. All terms and symbols are consistent with ANSI/IEEE C62.35.
4. For bidirectional type having VR of 10 volts and less, the IR limit is double.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/15/20
TVS Diodes
Surface Mount – 200W > SMF Series
I-V Curve Characteristics
Bi-directional
Uni-directional
Ipp
IT
IR
Vc VBR
VR
Vc VBR
VR
V
V
IR
IT
IR
IT
VRVBR Vc
VF
Ipp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current)
IR
Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 -TVSTransients ClampingWaveform
Voltage Transients
Figure 2 - Peak Pulse Power Rating Curve
10
Voltage Across TVS
1
Current Through TVS
0.1
0.000001
0.00001
0.0001
0.001
td-Pulse Width (sec.)
Time
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/15/20
TVS Diodes
Surface Mount – 200W > SMF Series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)
Figure 3 - Peak Pulse Power Derating Curve
Figure 4 - PulseWaveform - 10/1000µS
150
100%
t =10µsec
r
T
=25°C
J
Pulse Width(td) is defined
as the point where the peak
80%
60%
40%
20%
0%
SMF5.0 ~ SMF100
current decays to 50% of I
PPM
Peak Value
SMF110 ~ SMF250
I
100
PPM
Half Value
I
PPM
I
PPM
( )
2
50
0
10/1000µsec. Waveform
as defined by R.E.A
t
d
0
25
50
75
100
125
150
175
1.0
2.0
t-Time (ms)
3.0
4.0
0
TJ Initial Junction Temperature(˚C)
Figure 6 -Typical Junction Capacitance
Figure 5 - ForwardVoltage
10000
0.9
0.8
0.7
0.6
0.5
0.4
0
Uni-Directional V=0V
1000
Bi-Directional V=0V
100
Uni/Bi-Directional V=VR
10
1
-55
10
75
140
10
100
1000
1
Temperature (ºC)
VBR - Reverse Breakdown Voltage(V)
Figure 7 - Peak ForwardVoltage Drop vs.
Peak Forward Current
Figure 8 - Maximum Non-Repetitive Forward Surge
Current Uni-Directional Only
35
30
25
20
15
10
5
10
1
0.1
0.01
0
0
0.5
1
1.5
2
2.5
3
3.5
4
1
10
100
V
-Peak Forward Voltage(V)
F
Number of Cycles at 60 Hz
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/15/20
TVS Diodes
Surface Mount – 200W > SMF Series
Soldering Parameters
Reflow Condition
Lead–free assembly
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
Average ramp up rate (LiquidusTemp (TL) to peak
S(max) toTL - Ramp-up Rate
)
150°C
tp
TP
Pre Heat
)
200°C
Ramp-up
Critical Zone
60 – 120 secs
3°C/second max
3°C/second max
217°C
T
to T
L
P
TL
tL
Ts(max)
T
-Temperature (TL) (Liquidus)
-Time (min to max) (tL)
Ramp-down
Ts(min)
Reflow
ts
60 – 150 seconds
260+0/-5 °C
Preheat
PeakTemperature (TP)
Time within 5°C of actual peakTemperature (tp)
Ramp-down Rate
30 Seconds Max
6°C/second Max
8 minutes Max.
260°C
25˚C
t 25˚C to Peak
Time (t)
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Case
SOD-123FL plastic over glass passivated junction
Color band denotes cathode except bipolar
Matte tin-plated leads, solderable per JESD22-B102
HighTemp. Storage
JESD22-A103
JESD22-A108
JESD22-A104
Polarity
Terminal
HTRB
Temperature Cycling
MSL
JEDEC-J-STD-020, Level 1
JESD22-A101
H3TRB
RSH
JESD22-A111
Dimensions - SOD-123FL Package
Millimeters
Inches
Dimensions
Min
Max
Min
Max
SMF5.0A~SMF100A
2.50
2.90
0.0984
0.1142
A
SMF110A~SMF250A
SMF5.0CA~SMF85CA
2.90
3.10
0.1142
0.1220
B
3.40
0.70
1.50
0.35
0.05
0.00
0.95
3.90
1.20
2.00
0.90
0.26
0.10
1.10
0.1339
0.0275
0.0591
0.0138
0.0020
0.000
0.1535
0.0472
0.0787
0.0354
0.0102
0.0039
0.0433
C
D
E
F
C
D
F
G
SMF5.0A~SMF100A
0.0374
H
SMF110A~SMF250A
SMF5.0CA~SMF85CA
0.90
1.08
0.0354
0.0425
Mounting Pad Layout
1.3 (0.051)
1.6 (0.062)
1.4 (0.055)
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/15/20
TVS Diodes
Surface Mount – 200W > SMF Series
Part Numbering System
Part Marking System
SMF xx C A
Cathode Band
F
YM
L
(for uni-directional products only)
5% VBR Voltage Tolerance
Bi-directional
XX
Marking Code
Trace Code Marking
VR Voltage
Y:Year Code
Series
M: Month Code
Packaging Options
Component
Part number
Quantity
Packaging Option
Packaging Specification
Package
SOD-123FL
SOD-123FL
SMFXXX
3000
Tape & Reel – 8mm tape/7” reel
Tape & Reel – 8mm tape/13” reel
EIA RS-481
EIA RS-481
SMFXXX-T13
10000
Tape and Reel Specification
0.157
(4.0)
0.31
(8.0)
0.157
(4.0)
0.059
(1.5)
Cover tape
DIA
7.0 (178)
13.0 (330)
Dimensions are in inches
(and millimeters).
0.80 (20.2)
Arbor Hole Dia.
Direction of Feed
0.33
(8.5)
Cathode
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/15/20
相关型号：
UL1042
UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowegoWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV201
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14
IC-SM-VIDEO AMPWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TA
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TC
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV302N16
IC-SM-4:1 MUX SWITCHWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV4089
VIDEO AMPLIFIER WITH DC RESTORATIONWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
©2020 ICPDF网 联系我们和版权申明