SV6016D1TP [LITTELFUSE]
Thyristors 16 Amp High Junction Temperature SCR in DPAK pacakge;
| 型号： | SV6016D1TP |
| 厂家： | 
LITTELFUSE |
| 描述： | Thyristors 16 Amp High Junction Temperature SCR in DPAK pacakge |
| 文件： | 总6页 (文件大小：747K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Thyristors
16 Amp High Junction Temperature SCR in DPAK pacakge
SV6016Dx
RoHS
Description
this SV6016Dx high junction temperature SCR is ideal
for unidirectional switches for phase control and
general switching applications such as heating, motor
control controls, converters / rectifiers and capacitive
discharge ignitions.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Schematic Symbol
Features & Benefits
• RoHS compliant
• Surge capability up to 200
A at 60 Hz half cycle
A
K
• 150°C maximum junction
temperature
G
Applications
Main Features
Typical applications include AC Generator (ACG) rectifiers,
battery voltage regulators and generic converters and
inrush current controller in various AC to DC applications.
Additional applications include controls for power tools,
home/brown good and white goods appliances.
Symbol
IT(RMS)
Value
Unit
A
16
600
6
VDRM/VRRM
IGT
V
mA
Absolute Maximum Ratings
Symbol
Parameter
Test Conditions
PW=100 μs
Value
Unit
V
DSM/VRSM
IT(RMS)
IT(AV)
Peak non-repetitive blocking voltage
RMS on-state current
VDRM/VRRM+100
V
A
A
TC = 130°C
16
10.2
Average on-state current
TC = 130°C
f = 50Hz
180
Peak non-repetitive surge current
(single half cycle, TJ (initial) = 25°C)
ITSM
A
f = 60Hz
200
I2t
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3 ms
f = 60Hz; TJ = 150°C
TJ = 150°C
200
A2s
A/μs
A
di/dt
IGM
100
4
PG(AV)
Average gate power dissipation
Storage temperature range
0.8
W
TJ = 150°C
-40 to 150
-40 to 150
Tstg
TJ
°C
Operating junction temperature range
SV6016Dx
©2020 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 04/17/20
Thyristors
16 Amp High Junction Temperature SCR in DPAK pacakge
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol Test Conditions
Value
Unit
MAX.
MIN.
MAX.
6
IGT
mA
V
VD = 12V RL = 60 Ω
VD = 12V RL = 60 Ω
1.5
VGT
1.5
VD = 67% VDRM; gate open;TJ = 125°C
VD = 67% VDRM; gate open;TJ = 150°C
200
100
dv/dt
MIN.
V/μs
VGD
IH
MIN.
MAX.
MAX.
TYP.
0.2
40
V
mA
μs
VD = VDRM RL = 3.3 kΩ TJ = 150°C
IT = 200mA (initial)
tq
IT = 2A; tp = 50µs; dv/dt = 5V/µs; di/dt = 30A/µs
IG = 2 x IGT PW = 15µs IT = 24A
50
tgt
2.3
μs
Static Characteristics
Symbol
Test Conditions
Component IT = 32A; tp = 380 µs
TJ = 25°C
Value
Unit
VTM
MAX.
1.6
10
V
TJ = 125°C
500
2000
IDRM / IRRM
VDRM = VRRM
MAX.
μA
TJ = 150°C
Thermal Resistances
Symbol
Parameter
Junction to case (AC)
Value
Unit
1.4
°C/W
Rθ(JC)
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature
Figure 2: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
2.0
1.6
1.2
0.8
0.4
0.0
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-40
-15
10
35
60
85
110
135
150
-40
-15
10
35
60
85
110
135 150
JunctionTemperature (TJ) -- (ºC)
JunctionTemperature (TJ) -- (°C)
SV6016Dx
©2020 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 04/17/20
Thyristors
16 Amp High Junction Temperature SCR in DPAK pacakge
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: On-State Current vs. On-State
Voltage (Typical)
35
30
2.0
1.6
1.2
0.8
0.4
0.0
25
20
15
10
5
0
-40
-15
10
35
60
85
110
135 150
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
Instantaneous On-state Voltage (VT) – Volts
JunctionTemperature (TJ) - (°C)
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. RMS On-State Current
155
150
145
140
135
25
20
15
10
5
130
125
120
115
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
110
105
0
0
2
4
6
8
10
12
14
16
18
0
4
8
12
16
20
24
28
32
RMS On-State Current [IT(RMS)] - Amps
RMS On-state Current [I T(RMS)] - (Amps)
Figure 7: Maximum Allowable CaseTemperature
vs. Average On-State Current
Figure 8: Peak Capacitor Discharge Current
150
145
140
135
130
125
120
115
1000
100
ITRM
110
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
tW
105
100
10
0.5
1.0
10.0
50.0
0
1
2
3
4
5
6
7
8
9
10
11
Pulse Current Duration (tw) - ms
Average On-State Current [IT(AVE) ] - Amps
SV6016Dx
©2020 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 04/17/20
Thyristors
16 Amp High Junction Temperature SCR in DPAK pacakge
Figure 9: Peak Capacitor Discharge Current Derating
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
25
50
75
100
125
150
CaseTemperature (TC) - ºC
Figure 10: Surge Peak On-State Current vs. Number of Cycles
1000
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
100
10
1
10
100
1000
Surge Current Duraꢀon-- Full Cycles
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
Pre Heat -Temperature Max (Ts(max)
)
200°C
TL
TS(max)
-Time (min to max) (ts)
60 – 180 secs
tL
Average ramp up rate (LiquidusTemp)
(TL) to peak
Ramp-down
Preheat
5°C/second max
TS(min)
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
tS
-Temperature (TL) (Liquidus)
Reflow
-Time (tL)
60 – 150 seconds
260+0/-5 °C
25
time to peak temperature
PeakTemperature (TP)
Time
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
Time 25°C to peakTemperature (TP)
Do not exceed
5°C/second max
8 minutes Max.
280°C
SV6016Dx
©2020 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 04/17/20
Thyristors
16 Amp High Junction Temperature SCR in DPAK pacakge
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 150°C for 1008 hours
UL Recognized compound meeting
flammability rating V-0
MIL-STD-750, M-1051,
100 cycles; -55°C to +150°C;
15-min dwell-time
Temperature Cycling
Lead Material
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 160V - DC: 85°C;
85% rel humidity
Temperature/
Humidity
Design Considerations
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
1008 hours; -40°C
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Moisture Sensitivity
Level
Level 1, JEDEC-J-STD-020D
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount
E
6.71
.264
Anode
5.28
.208
TC MEASURING POINT
Inches
Millimeters
Typ
D
Dimension
Min
0.040
0.235
0.106
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
0.000
0.021
0°
Typ
Max
0.050
0.245
0.113
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
0.004
0.027
5°
Min
1.02
5.97
2.69
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
0.00
0.53
0°
Max
1.27
6.22
2.87
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
0.10
0.69
5°
A
B
6.71
.264
5.34
.210
A
B
C
D
E
F
0.043
0.243
0.108
0.208
0.262
0.031
0.090
0.092
0.179
0.020
0.040
0.020
0.000
0.026
0°
1.09
6.16
2.74
1.60
.063
P
Q
C
1.80
.071
5.29
6.65
0.80
2.28
2.33
4.55
0.51
1.02
GATE
F
AREA: 0.040 IN2
Cathode
Anode
3
.118
4.60
.181
G
I
G
H
I
L
O
H
K
J
M
N
J
K
L
0.51
0.00
0.67
0°
M
N
O
P
Q
0.042
0.034
0.047
0.039
0.052
0.044
1.06
0.86
1.20
1.32
1.11
1.00
SV6016Dx
©2020 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 04/17/20
Thyristors
16 Amp High Junction Temperature SCR in DPAK pacakge
Packing Options
Part Number
SV6016D1TP
SV6016D1RP
Marking
SV6016D1
SV6016D1
Weight
0.3 g
Packing Mode
Base Quantity
750 (75 per tube)
2500
Tube
Tape & Reel
0.3 g
Part Numbering System
Part Marking System
SV
TP
60 16 D
x
SV6016D1
PACKING TYPE
COMPONENT TYPE
SV: high temperature SCR
TP:Tube Pack
RP: Reel Pack
SENSITIVITY TYPE
VOLTAGE RATING
60: 600V
YMLDD
®
1: 6mA SCR
PACKAGE TYPE
D: TO-252 (D-Pak)
Date Code Marking
Y:Year Code
CURRENT RATING
M: Month Code
L: Location Code
DD: Calendar Code
16: 16A
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.157
(4.0)
0.059
Dia
(1.5)
Gate
Cathode
0.63
(16.0)
0.524
(13.3)
*
0.315
(8.0)
*
Cover tape
Anode
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
Disclaimer Noꢀce - Informaꢀon furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applicaꢀons. Liꢁelfuse products are not designed for, and may not be used in, all applicaꢀons.
Read complete Disclaimer Noꢀce at hꢁp://www.liꢁelfuse.com/disclaimer-electronics.
SV6016Dx
©2020 Littelfuse, Inc
Specifications are subject to change without notice.
Revised: 04/17/20
相关型号：
SV6102
Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon, AXIAL PACKAGE-2
SENSITRON
SV6102AUS
Trans Voltage Suppressor Diode, 500W, 5.2V V(RWM), Unidirectional, 1 Element, Silicon, HERMETIC SEALED, GLASS, MELF-2, 2 PIN
SENSITRON
SV6103
Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon, AXIAL PACKAGE-2
SENSITRON
SV6103A
Trans Voltage Suppressor Diode, 500W, 5.7V V(RWM), Unidirectional, 1 Element, Silicon, HERMETIC SEALED, GLASS PACKAGE-2
SENSITRON
SV6103AUS
Trans Voltage Suppressor Diode, 500W, 5.7V V(RWM), Unidirectional, 1 Element, Silicon, HERMETIC SEALED, GLASS, MELF-2, 2 PIN
SENSITRON
SV6104
Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon, AXIAL PACKAGE-2
SENSITRON
SV6104A
Trans Voltage Suppressor Diode, 500W, 6.2V V(RWM), Unidirectional, 1 Element, Silicon, HERMETIC SEALED, GLASS PACKAGE-2
SENSITRON
SV6104AUS
Trans Voltage Suppressor Diode, 500W, 6.2V V(RWM), Unidirectional, 1 Element, Silicon, HERMETIC SEALED, GLASS, MELF-2, 2 PIN
SENSITRON
SV6105
Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon, AXIAL PACKAGE-2
SENSITRON
SV6105A
Trans Voltage Suppressor Diode, 500W, 6.9V V(RWM), Unidirectional, 1 Element, Silicon, HERMETIC SEALED, GLASS PACKAGE-2
SENSITRON
©2020 ICPDF网 联系我们和版权申明