V120MLA1210H [LITTELFUSE]
Surface Mount Multilayer Varistors (MLVs) MLA Series; 表面贴装多层压敏电阻( MLV的) MLA系列型号: | V120MLA1210H |
厂家: | LITTELFUSE |
描述: | Surface Mount Multilayer Varistors (MLVs) MLA Series |
文件: | 总8页 (文件大小:432K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
tꢀ
*OIFSFOUꢀCJꢁEJSFDUJPOBMꢀ
clamping
tꢀ "&$ꢀꢁꢀ2ꢂꢃꢃꢀDPNQMJBOU
tꢀ
3BUFEꢀGPSꢀTVSHFꢀ
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
RoHS
MLA Varistor Series
Description
The MLA Series (also known as "ML" series) family of
transient voltage surge suppression devices is based on
the Littelfuse Multilayer fabrication technology. These
components are designed to suppress a variety of
transient events, including those specified in IEC 61000-4-2
or other standards used for Electromagnetic Compliance
(EMC). The MLA Series is typically applied to protect
integrated circuits and other components at the circuit
board level.
The wide operating voltage and energy range make the
MLA Series suitable for numerous applications on power
supply, control and signal lines.
SizeTable
The MLA Series is manufactured from semiconducting
ceramics, and is supplied in a leadless, surface mount
package. The MLA Series is compatible with modern
reflow and wave soldering procedures.
Metric
1005
1608
2012
ꢇꢂꢊꢆ
ꢇꢂꢂꢈ
EIA
0402
ꢃꢆꢃꢇ
0805
1206
1210
It can operate over a wider temperature range than Zener
diodes, and has a much smaller footprint than plastic-
housed components.
Littelfuse Inc. manufactures other multilayer series
products. See the MLE Series data sheet for ESD
applications, MHS Series data sheet for high-speed ESD
applications, the MLN Series for multiline protection and
Applications
tꢀ 4VQQSFTTJPOꢀPGꢀJOEVDUJWFꢀ
switching or other
tꢀ 6TFEꢀUPꢀIFMQꢀBDIJFWFꢀ
the AUML Series for automotive applications.
electromagnetic
compliance of
end products
transient events such as
EFT and surge voltage at
the circuit board level
Features
tꢀ 3FQMBDFꢀMBSHFSꢀTVSGBDFꢀ
mountTVS Zeners in
many applications
current (8 x 20μs)
tꢀ &4%ꢀQSPUFDUJPOꢀGPSꢀ*&$ꢀ
61000-4-2, MIL-STD-
tꢀ RoHS compliant
tꢀ 3BUFEꢀGPSꢀFOFSHZꢀ
tꢀ -FBEMFTTꢀꢃꢄꢃꢂꢅꢀꢃꢆꢃꢇꢅꢀ
0805, 1206 and
ꢋꢋꢇDꢀNFUIPEꢀꢇꢃꢊꢈꢌ ꢅꢀ
and other industry
specifications (see also
the MLE or MLN Series)
(10 x 1000μs)
1210 chip sizes
tꢀ .VMUJMBZFSꢀDFSBNJDꢀ
tꢀ /PꢀQMBTUJDꢀPSꢀFQPYZꢀ
packaging assures
better than UL94V-0
flammability rating
construction technology
tꢀ 1SPWJEFTꢀPOꢁCPBSEꢀ
transient voltage
protection for ICS
and transistors
tꢀ ꢁꢈꢈ¡$ꢀUPꢀꢉꢊꢂꢈ¡$ꢀ
operating temp. range
tꢀ 0QFSBUJOHꢀWPMUBHFꢀSBOHFꢀ
tꢀ 4UBOEBSEꢀMPXꢀDBQBDJUBODFꢀ
V
M(DC) = 5.5V to 120V
types available
Absolute Maximum Ratings
For ratings of individual members of a series, see device ratings and specifications table.
Continuous
ML Series
Units
Steady State Applied Voltage:
DC Voltage Range (VM(DC)
AC Voltage Range (VM(AC)RMS
Transient:
Non-Repetitive Surge Current, 8/20μs Waveform, (ITM
Non-Repetitive Surge Energy, 10/1000μs Waveform, (WTM
0QFSBUJOHꢀ"NCJFOUꢀ5FNQFSBUVSFꢀ3BOHFꢀꢎ5A)
)
ꢇꢌꢈꢀUPꢀꢊꢂꢃ
ꢂꢌꢈꢀUPꢀꢊꢃꢍ
V
V
)
)
4 to 500
A
J
ºC
ºC
)
0.02 to 2.5
ꢁꢈꢈꢀUPꢀꢉꢊꢂꢈ
ꢁꢈꢈꢀUPꢀꢉꢊꢈꢃ
StorageTemperature Range (TSTG
)
Temperature Coefficient (DV) of Clamping Voltage (VC) at
Specified Test Current
<0.01
%/º C
©2010 Littelfuse, Inc.
MLAVaristor Series
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html of MLA.html for current information.
Revision: November 10, 2010
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
Device Ratings and Specifications
Maximum Ratings (125º C)
Maximum Non- Maximum Non- Maximum Clamping Nominal Voltage
Specifications (25ºC)
Typical
Maximum
Continuous
repetitive Surge repetitive Surge Voltage at 1A (or as at 1mA DCTest Capacitance
Working Voltage Current (8/20μs) Energy (10/1000μs)
Noted) (8/20μs)
Current
at f = 1MHz
Part Number
VN(DC)
Min
(V)
ꢇꢌꢍ
ꢇꢌꢍ
ꢇꢌꢍ
ꢇꢌꢍ
ꢌ ꢊ
15.9
ꢌꢊ
ꢌꢊ
ꢌꢊ
ꢌꢊ
ꢌꢊ
VN(DC)
Max
(V)
ꢌꢃ
ꢌꢃ
ꢌꢃ
VM(DC)
VM(AC)
ITM
WTM
VC
C
(V)
ꢇꢌꢈ
ꢇꢌꢈ
ꢇꢌꢈ
ꢇꢌꢈ
5.5
5.5
5.5
5.5
5.5
5.5
5.5
9.0
9.0
9.0
9.0
9.0
12.0
14.0
14.0
14.0
14.0
14.0
18.0
18.0
18.0
18.0
18.0
18.0
26.0
26.0
26.0
26.0
26.0
ꢇꢃꢌꢃ
ꢇꢃꢌꢃ
ꢇꢃꢌꢃ
ꢇꢃꢌꢃ
ꢇꢇꢌꢃ
42.0
48.0
48.0
48.0
56.0
60.0
68.0
85.0
120.0
(V)
2.5
2.5
2.5
2.5
4.0
4.0
4.0
4.0
4.0
4.0
4.0
6.5
6.5
6.5
6.5
6.5
(A)
ꢇꢃ
120
40
100
20
20
ꢇꢃ
ꢇꢃ
120
40
150
20
4
ꢇꢃ
ꢇꢃ
40
40
20
ꢇꢃ
120
40
150
20
ꢇꢃ
120
40
150
500
ꢇꢃ
100
40
150
ꢇꢃꢃ
ꢇꢃ
(J)
(V)
ꢊꢇꢌꢃ
ꢊꢇꢌꢃ
ꢊꢇꢌꢃ
ꢊꢇꢌꢃ
21.0
ꢇꢏꢌꢃ
ꢊ ꢌꢈ
ꢊ ꢌꢈ
ꢊ ꢌꢈ
ꢊ ꢌꢈ
ꢊ ꢌꢈ
ꢇꢃꢌꢃ
ꢇꢈꢌꢃ
25.5
25.5
25.5
29.0
ꢇꢏꢌꢃ
ꢇꢄꢌꢈ
ꢇꢂꢌꢃ
ꢇꢂꢌꢃ
ꢇꢂꢌꢃ
50.0
50.0
(pF)
ꢊꢂꢍꢃ
ꢂꢈꢇꢃ
ꢊꢇꢋꢃ
6000
220
ꢍꢃ
500
450
1840
400
ꢇꢈꢃꢃ
120
ꢇꢇ
490
ꢇꢆꢃ
520
410
ꢍꢃ
180
560
ꢇꢂꢃ
1400
40
120
520
290
ꢊꢂꢍꢃ
1440
110
220
140
600
1040
90
7ꢇꢌꢈ.-"ꢃꢆꢃꢇ/5
7ꢇꢌꢈ.-"ꢃꢋꢃꢈ/
7ꢇꢌꢈ.-"ꢃꢋꢃꢈ-/
7ꢇꢌꢈ.-"ꢊꢂꢃꢆ/
V5.5MLA0402N
V5.5MLA0402LN
7ꢈꢌꢈ.-"ꢃꢆꢃꢇ/5
7ꢈꢌꢈ.-"ꢃꢆꢃꢇ-/4
V5.5MLA0805N
V5.5MLA0805LN
V5.5MLA1206N
V9MLA0402N
0.100
ꢃꢌꢇꢃꢃ
0.100
ꢃꢌꢇꢃꢃ
0.050
0.050
0.100
0.100
ꢃꢌꢇꢃꢃ
0.100
0.400
0.050
0.020
0.100
0.100
0.100
0.100
0.050
0.100
ꢃꢌꢇꢃꢃ
0.100
0.400
0.050
0.100
ꢃꢌꢇꢃꢃ
0.100
0.400
2.500
0.100
ꢃꢌꢇꢃꢃ
0.100
0.600
1.200
0.100
0.100
1.200
0.900
0.800
0.800
0.900
1.200
0.900
1.000
1.500
1.000
2.500
2.000
ꢌꢃ
10.8
21.5
ꢏꢌꢇ
ꢏꢌꢇ
ꢏꢌꢇ
ꢏꢌꢇ
ꢏꢌꢇ
11.0
11.0
11.0
11.0
11.0
14.0
15.9
15.9
15.9
15.9
15.9
22.0
22.0
22.0
22.0
22.0
22.0
ꢇꢊꢌꢃ
29.5
29.5
29.5
29.5
ꢇ ꢌꢃ
ꢇ ꢌꢃ
ꢇꢈꢌꢃ
ꢇꢈꢌꢃ
ꢇꢋꢌꢃ
46.0
54.5
54.5
54.5
61.0
ꢆ ꢌꢃ
ꢍꢆꢌꢃ
95.0
ꢊꢇꢈꢌꢃ
16.0
16.0
16.0
16.0
16.0
18.5
21.5
21.5
ꢂꢃꢌꢇ
ꢂꢃꢌꢇ
ꢂꢃꢌꢇ
28.0
28.0
28.0
28.0
28.0
28.0
ꢇꢋꢌꢃ
ꢇꢋꢌꢈ
ꢇꢋꢌꢈ
ꢇꢋꢌꢈ
ꢇꢋꢌꢈ
46.0
46.0
ꢄꢇꢌꢃ
ꢄꢇꢌꢃ
49.0
60.0
66.5
66.5
66.5
ꢍ ꢌꢃ
ꢋꢇꢌꢃ
90.0
115.0
165.0
V9MLA0402LN
7ꢏ.-"ꢃꢆꢃꢇ/5
7ꢏ.-"ꢃꢆꢃꢇ-/4
V9MLA0805LN
V12MLA0805LN
V14MLA0402N
7ꢊꢄ.-"ꢃꢆꢃꢇ/
V14MLA0805N
V14MLA0805LN
V14MLA1206N
V18MLA0402N
7ꢊꢋ.-"ꢃꢆꢃꢇ/
V18MLA0805N
V18MLA0805LN
V18MLA1206N
V18MLA1210N
7ꢂꢆ.-"ꢃꢆꢃꢇ/
V26MLA0805N
V26MLA0805LN
V26MLA1206N
V26MLA1210N
7ꢇꢃ.-"ꢃꢆꢃꢇ/
7ꢇꢃ.-"ꢃꢋꢃꢈ-/
7ꢇꢃ.-"ꢊꢂꢊꢃ/
7ꢇꢃ.-"ꢊꢂꢊꢃ-/
7ꢇꢇ.-"ꢊꢂꢃꢆ/
V42MLA1206N
V48MLA1206N
V48MLA1210N
V48MLA1210LN
V56MLA1206N
V60MLA1210N
V68MLA1206N
V85MLA1210N
V120MLA1210N
/05&4ꢐꢀ
9.0
10.0
10.0
10.0
10.0
10.0
14.0
14.0
14.0
14.0
14.0
14.0
20.0
20.0
20.0
20.0
20.0
25.0
25.0
25.0
25.0
26.0
ꢇꢃꢌꢃ
40.0
40.0
40.0
40.0
50.0
50.0
ꢆ ꢌꢃ
ꢊꢃ ꢌꢃ
44.0
44.0
44.0
44.0 at 2.5
60.0
60.0
60.0
60.0
60.0 at 2.5
ꢍꢄꢌꢃ
ꢇꢃ
ꢍꢂꢌꢃ
90
280
220
180
180
180
250
220
180
250
180
250
125
68.0 at 2.5
68.0 at 2.5
ꢍꢈꢌꢃ
1820
ꢊꢍꢆꢃ
500
425
ꢇꢈꢃ
520
500
180
440
100
260
80
92.0
100
105.0 at 2.5
105.0 at 2.5
120.0
ꢊꢇꢃꢌꢃꢀBUꢀꢂꢌꢈ
140.0
180.0 at 2.5
260.0 at 2.5
1
2
'L' suffix is a low capacitance and energy version; Contact your Littelfuse sales representative for custom capacitance requirements
Typical leakage at 25ºC<25μA, maximum leakage 100μA at VM(DC); for 0402 size, typical leakage <5μA, maximum leakage <20μA at VM(DC)
ꢇꢀ "WFSBHFꢀQPXFSꢀEJTTJQBUJPOꢀPGꢀUSBOTJFOUTꢀGPSꢀꢃꢄꢃꢂꢅꢀꢃꢆꢃꢇꢅꢀꢃꢋꢃꢈꢅꢀꢊꢂꢃꢆꢀBOEꢀꢊꢂꢊꢃꢀTJ[FTꢀOPUꢀUPꢀFYDFFEꢀꢃꢌꢃꢇ8ꢅꢀꢃꢌꢃꢈ8ꢅꢀꢃꢌꢊ8ꢅꢀꢃꢌꢊ8ꢀBOEꢀꢃꢌꢊꢈ8ꢀSFTQFDUJWFMZ
ꢄꢀ *UFNꢀJTꢀBWBJMBCMFꢀBTꢀh3hꢀQBDLJOHꢀPQUJPOꢀPOMZꢌꢀ"MMꢀꢃꢄꢃꢂꢀTJ[FꢀJUFNTꢀBWBJMBCMFꢀBTꢀh3hꢀQBDLBHJOHꢀPQUJPOꢀPOMZꢌꢀ4FFꢀ1BDLBHJOHꢀTFDUJPOꢀGPSꢀBEEJUJPOBMꢀJOGPSNBUJPOꢌ
ꢈꢀ *UFNꢀJTꢀBWBJMBCMFꢀJOꢀh)hꢅh5hBOEꢀh"hꢀQBDLJOHꢀPQUJPOꢀPOMZꢌꢀ"MMꢀꢃꢋꢃꢈꢅꢀꢊꢂꢃꢆꢀBOEꢀꢊꢂꢊꢃꢀQBSUTꢀDPNFꢀBTꢀh)hꢅh5hBOEꢀh"hꢀQBDLJOHꢀPQUJPOꢀPOMZꢌꢀ4FFꢀ1BDLBHJOHꢀTFDUJPOꢀGPSꢀBEEJUJPOBMꢀJOGPSNBUJPOꢌꢀ
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html or MLA.html for current information.
MLAVaristor Series
Revision: November 10, 2010
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
Peak Current and Energy Derating Curve
Peak Pulse CurrentTest Waveform for ClampingVoltage
When transients occur in rapid succession, the average
power dissipation is the energy (watt-seconds) per pulse
times the number of pulses per second. The power so
developed must be within the specifications shown
on the Device Ratings and SpecificationsTable for the
TQFDJmDꢀEFWJDFꢌꢀ'PSꢀBQQMJDBUJPOTꢀFYDFFEJOHꢀꢊꢂꢈ¡$ꢀBNCJFOUꢀ
temperature, the peak surge current and energy ratings
must be derated as shown below.
100
50
0
T
O
TIME
1
T
1
Figure 2
T
2
100
80
01ꢀꢑꢀ7JSUVBMꢀ0SJHJOꢀPGꢀ8BWF
5ꢀꢀꢑꢀ5JNFꢀGSPNꢀꢊꢃꢒꢀUPꢀꢏꢃꢒꢀPGꢀ1FBL
T1 = RiseTime = 1.25 xT
60
40
T2 = DecayTime
20
0
Example - For an 8/20 μTꢀ$VSSFOUꢀ8BWFGPSNꢐ
8μs =T1 = RiseTime
-55
50 60
70
80
90 100 110 120 130 140 150
o
20μs =T2 = DecayTime
AMBIENTTEMPERATURE ( C)
Figure 1
LimitV-I Characteristic forV5.5MLA0402 toV18MLA0402
LimitV-I Characteristic forV9MLA0402L
100
100
10
10
V18MLA0402
V14MLA0402
V9MLA0402
V5.5MLA0402
V9MLA0402L
V5.5MLA0402L
1
1μA
1
10μA
100μA
1mA
10mA
1A
10A
100A
1μA
10μA
100μA
1mA
10mA
1A
10A
100A
Current (A)
Figure 3
Figure 4
Current (A)
LimitV-I Characteristic forV3.5MLA0603 toV30MLA0603
LimitV-I Characteristic forV3.5MLA0805L toV30MLA0805L
1000
1000
V30MLA0805L
V26MLA0805L
V18MLA0805L
V30MLA0603
V26MLA0603
V18MLA0603
V14MLA0805L
100
100
V14MLA0603
10
10
V12MLA0805L
V9MLA0603, V9MLA0603L
V9MLA0805L
V5.5MLA0603, V5.5MLA0603L
V3.5MLA0603
V5.5MLA0805L
V3.5MLA0805L
1
1
10μA
100μA
1mA
10mA
100mA
1A
10A
100A
10μA
100μA
1mA
10mA
Current (A)
100mA
1A
10A
100A
Current (A)
Figure 5
Figure 6
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html of MLA.html for current information.
MLAVaristor Series
Revision: November 10, 2010
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
LimitV-I Characteristic forV3.5MLA0805 toV26MLA0805
LimitV-I Characteristic forV3.5MLA1206 toV68MLA1206
1000
100
10
1000
100
V68MLA1206
V56MLA1206
V42MLA1206
V33MLA1206
V26MLA1206
V18MLA1206
V14MLA1206
V5.5MLA1206
V3.5MLA1206
V26MLA0805
10
V18MLA0805
V14MLA0805
V5.5MLA0805
V3.5MLA0805
1
10μA
100μA
1mA
10mA
100mA
1A
10A
100A 1000A
Current (A)
Figure 7
1
10μA
100μA
1mA
10mA
100mA
1A
10A
100A
1000A
Current (A)
Figure 8
LimitV-I Characteristic forV18MLA1210 toV120MLA1210
1000
MAXIMUM CLAMPING VOLTAGE
MAXIMUM LEAKAGE
100
V120MLA1210
10
V85MLA1210
V60MLA1210
V48MLA1210, V48MLA1210L
V30MLA1210, V30MLA1210L
V26MLA1210
V18MLA1210
1
10μA
100μA
1mA
10mA
100mA
1A
10A
100A
1000A
CURRENT (A)
Figure 9
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html or MLA.html for current information.
MLAVaristor Series
Revision: November 10, 2010
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
Device Characteristics
ClampingVoltage OverTemperature (VC at 10A)
At low current levels, the V-I curve of the multilayer
transient voltage suppressor approaches a linear (ohmic)
relationship and shows a temperature dependent effect.
At or below the maximum working voltage, the suppressor
is in a high resistance modex (approaching 106Ω at its
maximum rated working voltage). Leakage currents at
maximum rated voltage are below 100μA, typically 25μA;
for 0402 size below 20μA, typically 5μA.
100
V26MLA1206
V5.5MLA1206
TypicalTemperature Dependance of the Haracteristic
Curve in the Leakage Region
100%
10
-60
-40
-20
0
20
40
60
80
100 120 140
o
TEMPERATURE ( C)
Figure 11
Energy Absorption/Peak Current Capability
Energy dissipated within the MLA Series is calculated
by multiplying the clamping voltage, transient current
and transient duration. An important advantage of the
multilayer is its interdigitated electrode construction within
the mass of dielectric material. This results in excellent
current distribution and the peak temperature per energy
absorbed is very low. The matrix of semiconducting grains
combine to absorb and distribute transient energy (heat)
(see Speed of Response). This dramatically reduces peak
temperature; thermal stresses and enhances device
reliability.
o
o
o
o
o
C
25 50 75
-8 -7
100 125
10%
1E
-9
-6
-5
-4
-3
-2
1E
1E
1E
1E
1E
1E
1E
SUPPRESSOR CURRENT (A
DC
)
Figure 10
Speed of Response
The Multilayer Suppressor is a leadless device. Its
response time is not limited by the parasitic lead
inductances found in other surface mount packages.
The response time of the ZN0ꢀEJFMFDUSJDꢀNBUFSJBMꢀJTꢀMFTTꢀ
than 1ns and the MLA can clamp very fast dV/dT events
such as ESD. Additionally, in "real world" applications,
the associated circuit wiring is often the greatest
factor effecting speed of response. Therefore, transient
suppressor placement within a circuit can be considered
important in certain instances.
As a measure of the device capability in energy and peak
current handling, the V26MLA1206A part was tested with
multiple pulses at its peak current rating (150A, 8/20μs). At
the end of the test,10,000 pulses later, the device voltage
characteristics are still well within specification.
3FQFUJUJWFꢀ1VMTFꢀ$BQBCJMJUZ
Multilayer Internal Construction
100
PEAK CURRENT = 150A
8/20 s DURATION, 30s BETWEEN PULSES
FIRED CERAMIC
DIELECTRIC
V26MLA1206
METAL
ELECTRODES
METAL END
TERMINATION
10
DEPLETION
REGION
0
2000
4000
6000
8000
10000
12000
NUMBER OF PULSES
Figure 13
DEPLETION
REGION
Figure 12
GRAINS
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html of MLA.html for current information.
MLAVaristor Series
Revision: November 10, 2010
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
Lead (Pb) Soldering Recommendations
The principal techniques used for the soldering of
components in surface mount technology are IR Re-flow
and Wave soldering. Typical profiles are shown on the right.
Reflow Solder Profile
250
200
150
100
The recommended solder for the MLA suppressor is
Bꢀꢆꢂꢓꢇꢆꢓꢂꢀꢎ4Oꢓ1Cꢓ"Hꢔꢅꢀꢆꢃꢓꢄꢃꢀꢎ4Oꢓ1CꢔꢀPSꢀꢆꢇꢓꢇꢍꢀꢎ4Oꢓ1Cꢔꢌꢀ
Littelfuse also recommends an RMA solder flux.
MAXIMUM TEMPERATURE
230°C
40-80
SECONDS
ABOVE 183°C
Wave soldering is the most strenuous of the processes.
To avoid the possibility of generating stresses due to
thermal shock, a preheat stage in the soldering process
is recommended, and the peak temperature of the solder
process should be rigidly controlled.
RAMP RATE
<2°C/s
PREHEAT DWELL
PREHEAT ZONE
50
When using a reflow process, care should be taken to
ensure that the MLA chip is not subjected to a thermal
gradient steeper than 4 degrees per second; the ideal
gradient being 2 degrees per second. During the soldering
process, preheating to within 100 degrees of the solder's
peak temperature is essential to minimize thermal shock.
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Figure 14
TIME (MINUTES)
Wave Solder Profile
0ODFꢀUIFꢀTPMEFSJOHꢀQSPDFTTꢀIBTꢀCFFOꢀDPNQMFUFEꢅꢀJUꢀJTꢀ
still necessary to ensure that any further thermal shocks
BSFꢀBWPJEFEꢌꢀ0OFꢀQPTTJCMFꢀDBVTFꢀPGꢀUIFSNBMꢀTIPDLꢀJTꢀIPUꢀ
printed circuit boards being removed from the solder
process and subjected to cleaning solvents at room
temperature. The boards must be allowed to cool gradually
to less than 50º C before cleaning.
300
250
200
150
100
MAXIMUMWAVE 260°C
SECOND PREHEAT
FIRST PREHEAT
50
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
Figure 15
TIME (MINUTES)
Lead–free (Pb-free) Soldering Recommendations
Littelfuse offers the Nickel BarrierTermination option (see
ꢕ/ꢕꢀTVGmYꢀJOꢀ1BSUꢀ/VNCFSJOHꢀ4ZTUFNꢀGPSꢀPSEFSJOHꢔꢀGPSꢀUIFꢀ
optimum Lead–free solder performance, consisting of a
MatteTin outer surface plated on Nickel underlayer, plated
on Silver base metal.
Lead–free Re-flow Solder Profile
300
MAXIMUM TEMPERATURE 260˚C,
TIME WITHIN 5˚C OF PEAK
20 SECONDS MAXIMUM
250
200
150
100
50
5IFꢀQSFGFSSFEꢀTPMEFSꢀJTꢀꢏꢆꢌꢈꢓꢇꢌꢃꢓꢃꢌꢈꢀꢎ4O"H$VꢔꢀXJUIꢀBOꢀ3."ꢀ
flux, but there is a wide selection of pastes and fluxes
available with which the Nickel Barrier parts should be
compatible.
RAMP RATE
<3˚C/s
60 - 150 SEC
> 217˚C
PREHEAT ZONE
The reflow profile must be constrained by the maximums
JOꢀUIFꢀ-FBEoGSFFꢀ3FnPXꢀ1SPmMFꢌꢀ'PSꢀ-FBEoGSFFꢀXBWFꢀ
TPMEFSJOHꢅꢀUIFꢀ8BWFꢀ4PMEFSꢀ1SPmMFꢀTUJMMꢀBQQMJFTꢌ
0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
/PUFꢐꢀUIFꢀ-FBEoGSFFꢀQBTUFꢅꢀnVYꢀBOEꢀQSPmMFꢀXFSFꢀVTFEꢀGPSꢀ
evaluation purposes by Littelfuse, based upon industry
standards and practices. There are multiple choices of all
three available, it is advised that the customer explores the
optimum combination for their process as processes vary
considerably from site to site.
Figure 16
TIME (MINUTES)
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html or MLA.html for current information.
MLAVaristor Series
Revision: November 10, 2010
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
Product Dimensions (mm)
1"%ꢀ-":065ꢀ%*.&/4*0/4
$)*1ꢀ-":065ꢀ%*.&/4*0/4
C
E
B
NOTE
D
L
W
A
/05&ꢀꢐꢀ"WPJEꢀNFUBMꢀSVOTꢀJOꢀUIJTꢀBSFBꢅꢀQBSUTꢀOPUꢀSFDPNNFOEFEꢀGPSꢀVTFꢀJOꢀBQQMJDBUJPOTꢀVTJOHꢀ
Silver (Ag) epoxy paste.
1210 Size
IN
1206 Size
IN
0805 Size
IN
0603 Size
IN
0402 Size
IN
Dimension
MM
4.06
2.54
1.02
ꢂꢌꢋꢍ
MM
4.06
1.65
1.02
1.80
MM
ꢇꢌꢃꢈ
ꢊꢌꢂꢍ
1.02
1.10
MM
2.54
ꢃꢌꢍꢆ
0.89
1.00
MM
ꢊꢌꢍꢃ
0.51
0.61
0.60
A
0.160
0.100
0.040
ꢃꢌꢊꢊꢇ
0.160
0.065
0.040
ꢃꢌꢃꢍꢊ
0.120
0.050
0.040
ꢃꢌꢃꢄꢇ
0.100
ꢃꢌꢃꢇꢃ
ꢃꢌꢃꢇꢈ
0.040
ꢃꢌꢃꢆꢍ
0.020
0.024
0.024
B
C
D (max.)
0.020
0.50
0.020
0.50
ꢃꢌꢃꢂꢃꢀꢁꢓꢉꢀ
ꢃꢌꢈꢃꢀꢁꢓꢉꢀ
0.015
0.4
0.010
0.25
E
L
ꢁꢓꢉꢃꢌꢃꢊꢃ
ꢁꢓꢉꢃꢌꢂꢈ
ꢁꢓꢉꢃꢌꢃꢊꢃ
ꢁꢓꢉꢃꢌꢂꢈ
0.010
0.25
ꢁꢓꢉꢃꢌꢃꢃꢋ
ꢁꢓꢉꢃꢌꢂꢃ
ꢁꢓꢉꢃꢌꢃꢃꢆ
ꢁꢓꢉꢃꢌꢊꢈ
0.125
ꢁꢓꢉꢃꢌꢃꢊꢂ
ꢇꢌꢂꢃꢀ
ꢁꢓꢉꢃꢌꢇꢃ
0.125
ꢁꢓꢉꢃꢌꢃꢊꢂ
ꢇꢌꢂꢃꢀ
ꢁꢓꢉꢃꢌꢇꢃ
ꢃꢌꢃꢍꢏꢀ
ꢁꢓꢉꢃꢌꢃꢃꢋ
2.01
ꢁꢓꢉꢃꢌꢂꢃ
ꢃꢌꢃꢆꢇꢀ
ꢁꢓꢉꢃꢌꢃꢃꢆ
1.6
ꢁꢓꢉꢃꢌꢊꢈ
ꢃꢌꢃꢇꢏꢀ
ꢁꢓꢉꢃꢌꢃꢃꢄ
1.00
ꢁꢓꢉꢃꢌꢊꢃ
0.100
ꢁꢓꢉꢃꢌꢃꢊꢂ
2.54
ꢁꢓꢉꢃꢌꢇꢃ
0.060
ꢁꢓꢉꢃꢌꢃꢊꢊ
1.60
ꢁꢓꢉꢃꢌꢂꢋ
0.049
ꢁꢓꢉꢃꢌꢃꢃꢋ
1.25
ꢁꢓꢉꢃꢌꢂꢃ
ꢃꢌꢃꢇꢂꢀ
ꢁꢓꢉꢃꢌꢃꢆꢃ
0.8
ꢁꢓꢉꢃꢌꢊꢈ
0.020
ꢁꢓꢉꢃꢌꢃꢃꢄ
0.50
ꢁꢓꢉꢃꢌꢊꢃ
W
Part Numbering System
V 18 MLA1206 X X X
PACKING OPTIONS (see Packaging table for quantities)
T: 13in (330mm) Diameter Reel, Plastic Carrier Tape
H: 7in (178mm) Diameter Reel, Plastic Carrier Tape
R: 7in (178mm) Diameter Reel, Paper Carrier Tape
A: Bulk Pack
DEVICE FAMILY
Littelfuse TVSS Device
MAXIMUM DC
WORKING VOLTAGE
END TERMINATION OPTION
No Letter: Standard
N: Nickel Barrier Option
MULTILAYER SERIES
DESIGNATOR
(Matte Tin outer surface, plated on Nickel underlayer
plated on silver base metal)
DEVICE SIZE:
0201 = .024 inch x .012 inch (0.6 mm x 0.3 mm)
0402 = .04 inch x .02 inch (1.0 mm x 0.5 mm)
0603 = .063 inch x .031 inch (1.6 mm x 0.8 mm)
0805 = .08 inch x .08 inch (2.0 mm x 1.25 mm)
1206 = .126 inch x .063 inch (3.2 mm x 1.6 mm)
1210 = .126 inch x .1 inch (3.2 mm x 2.5 mm)
CAPACITANCE OPTION
No Letter: Standard
L: Low Capacitance Version
ꢖ/05&4ꢐ
1 V120MLA1210 standard shipping quantities are 1000 pieces per reel for the "H" option and 4000 pieces per reel for "T" option.
ꢂꢀ7ꢇꢌꢈꢀ.-"ꢃꢆꢃꢇꢅꢀ7ꢈꢌꢈ.-"ꢃꢆꢃꢇꢀBOEꢀ7ꢏ.-"ꢃꢆꢃꢇꢀPOMZꢀBWBJMBCMFꢀJOꢀꢕ)ꢅꢕꢀꢕ5ꢕꢀBOEꢀꢕ"ꢕꢀQBDLJOHꢀPQUJPOTꢌ
Packaging*
Quantity
Device Size
13” Inch Reel
("T" Option)
7” Inch Reel
("H" Option)
7” Inch Reel
("R" Option)
Bulk Pack
("A" Option)
1210
1206
0805
ꢃꢆꢃꢇ
0402
8,000
10,000
10,000
10,000
N/A
2,000
2,500
2,500
2,500
N/A
N/A
N/A
N/A
4,000
10,000
2,000
2,500
2,500
2,500
N/A
ꢖꢎ1BDLBHJOHꢔꢀ*UꢀJTꢀSFDPNNFOEFEꢀUIBUꢀQBSUTꢀCFꢀLFQUꢀJOꢀUIFꢀTFBMFEꢀCBHꢀQSPWJEFEꢀBOEꢀUIBUꢀQBSUTꢀCFꢀVTFEꢀBTꢀTPPOꢀBTꢀQPTTJCMFꢀXIFOꢀSFNPWFEꢀGSPNꢀCBHTꢌ
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html of MLA.html for current information.
MLAVaristor Series
Revision: November 10, 2010
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
Tape and Reel Specifications
PRODUCT
IDENTIFYING
LABEL
D
P
0
0
For T and H Pack Options: PLASTIC CARRIER TAPE
For R Pack Options: EMBOSSED PAPER CARRIER TAPE
P
2
E
F
W
K
0
B
0
EMBOSSMENT
TOP TAPE
178mm
OR 330mm
DIA. REEL
8mm
NOMINAL
P
A
0
1
t
D
1
1
Dimensions in Millimeters
0402 Size 0603, 0805, 1206 & 1210 Sizes
Symbol
Description
A0
B0
K0
W
F
Width of Cavity
Length of Cavity
Depth of Cavity
Width ofTape
Dependent on Chip Size to Minimize Rotation.
Dependent on Chip Size to Minimize Rotation.
Dependent on Chip Size to Minimize Rotation.
ꢋꢀꢁꢓꢉꢃꢌꢂꢀ
ꢇꢌꢈꢀꢁꢓꢉꢃꢌꢃꢈꢀꢀ
ꢊꢌꢍꢈꢀꢁꢓꢉꢃꢌꢊꢀꢀ
ꢂꢁꢓꢉꢃꢌꢃꢈ
ꢋꢀꢁꢓꢉꢃꢌꢇꢀ
ꢇꢌꢈꢀꢁꢓꢉꢃꢌꢃꢈꢀꢀ
ꢊꢌꢍꢈꢀꢁꢓꢉꢃꢌꢊꢀꢀ
ꢄꢀꢁꢓꢉꢃꢌꢊꢀ
Distance Between Drive Hole Centers and Cavity Centers
Distance Between Drive Hole Centers andTape Edge
Distance Between Cavity Centers
E
P1
P2
P0
D0
D1
T1
Axial Drive Distance Between Drive Hole Centers & Cavity Centers
Axial Drive Distance Between Drive Hole Centers
Drive Hole Diameter
ꢂꢀꢁꢓꢉꢃꢌꢊꢀꢀ
ꢄꢀꢁꢓꢉꢃꢌꢊꢀ
ꢂꢀꢁꢓꢉꢃꢌꢊꢀꢀ
ꢄꢀꢁꢓꢉꢃꢌꢊꢀ
ꢊꢌꢈꢈꢀꢁꢓꢉꢃꢌꢃꢈ
N/A
ꢊꢌꢈꢈꢀꢁꢓꢉꢃꢌꢃꢈ
ꢊꢌꢃꢈꢀꢁꢓꢉꢃꢌꢃꢈꢀꢀ
0.1 Max
%JBNFUFSꢀPGꢀ$BWJUZꢀ1JFSDJOH
TopTapeThickness
0.1 Max
/05&4ꢐ
tꢀ$POGPSNTꢀUPꢀ&*"ꢁꢄꢋꢊꢁꢊꢅꢀ3FWJTJPOꢀ"
tꢀ$BOꢀCFꢀTVQQMJFEꢀUPꢀ*&$ꢀQVCMJDBUJPOꢀꢂꢋꢆꢁꢇ
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/ML.html or MLA.html for current information.
MLAVaristor Series
Revision: November 10, 2010
相关型号:
V120MT2S
Varistor, 101V, 0.46J, Through Hole Mount, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明