V25S320PX1347 [LITTELFUSE]
Varistor, 420V, 540J, Through Hole Mount;型号: | V25S320PX1347 |
厂家: | LITTELFUSE |
描述: | Varistor, 420V, 540J, Through Hole Mount 电阻器 |
文件: | 总5页 (文件大小:802K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Metal-OxideVaristors (MOVs)
Radial Lead Varistors > UltraMOVTM 25S Varistor Series
®
ꢀoHS
UltraMOV 25S Varistor Series
Description
The UltraMOV® 25S Varistor Series is designed for
applications requiring high peak surge current ratings and
high energy absorption capability. UltraMOV™ varistors are
primarily intended for use in AC Line Voltage applications
such as Surge Protective Devices (SPD), Uninterruptable
Power Supplies (UPS), AC PowerTaps, AC Power Meters,
or other products that require voltage clamping of high
transient surge currents from sources such as lightning,
inductive load switching, or capacitor bank switching.
These devices have 25mm square forms are produced
in a radial lead package and offered with straight leads.
UltraMOV® 25S varistors are manufactured with
Agency Approvals
recognized epoxy encapsulation and are rated for ambient
temperatures up to 85°C with no derating. This 25S Series
is LASER-branded and is supplied in bulk packaging.
Agency
Agency Approval
Agency File Number
UL1449
E320116
22.2-1
091788
116895
Features
IEC 61051-1, IEC61051-2,
IEC 60950-1 (Annex Q)
• Lead–free and
RoHS compliant.
• Custom voltage
types available
Additional Information
• High peak surge
current rating (ITM)
22kA, single 8/20µs
pulse, (25mm)
• Standard lead form
and lead space options
• Standard operating
voltage range
Datasheet
ꢀesoꢁrꢂes
ꢀaꢁꢂles
compatible with
common AC line
voltages (115 to
750VAC)
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
Continuous
UltraMOV® 25S Varistor Series
Units
Steady State Applied Voltage:
AC Voltage Range (VM(AC)RMS
)
115 to 750
150 to 970
V
V
DC Voltage Range (VM(DC)
)
Transients:
Peak Pulse Current (ITM) 8x20µs Current Wave Single Pulse
22,000
230 to 890
-55 to +85
-55 to +125
<0.01
A
J
Single-Pulse Energy Capability (WTM) 2ms Current Wave
Operating AmbientTemperature Range (TA)
ºC
StorageTemperature Range (TSTG
)
ºC
Temperature Coefficient (aV) of Clamping Voltage (VC) at SpecifiedTest Current
%/C
Hi-Pot Encapsulation (COATING Isolation Voltage Capability)
Dielectic Withstand DC for 1 min per MIL–STD–202, Method 301
Insulation Resistance of the Epoxy Coating
2500
1000
V
MΩ
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any
other conditions above those indicated in the operational sections of this specification is not implied.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/14/17
Metal-OxideVaristors (MOVs)
Radial Lead Varistors > UltraMOVTM 25S Varistor Series
Ratings & Specifications
Maximum Rating (85°C)
Specifications (25°C)
Continuous
Transient
Maximum
Clamping
Voltage at 100A,
8 x 20µs
UL 1449
Typical
Capaci-
tance
Varistor Voltage
at 1mA DC
Test Current
Voltage
Protection
Rating
Peak Surge
Energy
2ms
AC Volts DC Volts
Current
Part
Number
f = 1MHz
8 x 20µs
Branding
WTM
1 x
Pulse
ITM
1 x Pulse
VNOM
Min
VNOM
Max
VM(AC)RMS
VM(DC)
VC
VPR
C
(V)
115
130
140
150
175
230
250
275
300
320
385
420
440
460
510
550
625
750
(V)
150
170
180
200
225
300
320
350
385
420
505
560
585
615
670
745
825
970
(J)
(A)
(V)
(V)
(pF)
4500
3900
3500
3200
2550
1900
1750
1610
1450
1350
1080
1000
900
V25S115P P25S115
V25S130P P25S130
V25S140P P25S140
V25S150P P25S150
V25S175P P25S175
V25S230P P25S230
V25S250P P25S250
V25S275P P25S275
V25S300P P25S300
V25S320P P25S320
V25S385P P25S385
V25S420P P25S420
V25S440P P25S440
V25S460P P25S460
V25S510P P25S510
V25S550P P25S550
V25S625P P25S625
V25S750P P25S750
230
255
285
300
315
400
435
470
500
540
630
655
675
690
700
765
800
890
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
22000
162
184.5
198
198
225.5
242
264
297
396
429
473
517
561
682
748
786.5
825
295
335
355
390
450
585
640
700
765
400
500
500
500
600
700
800
900
1000
1000
1200
1500
n/a
216
243
324
351
387
423
459
558
612
643.5
675
738
819
825
1010
1100
1160
1220
1335
1475
1625
1950
n/a
n/a
n/a
n/a
870
820
750
660
902
1001
1100
1320
900
1080
n/a
550
Note: Average powder dissipation of transients should not exceed 1.5 watts.
TransientV-I Characteristics Curves
Peak Current, Energy and Power Derating Curve
Peak Pulse CurrentTestWaveform for ClampingVoltage
100
ꢅꢀꢀ
ꢄꢀ
50
ꢃꢀ
ꢂꢀ
ꢁꢀ
0
t
t1
T IM E
O 1
t2
ꢀ
Figure 2
ꢆꢆ ꢆꢀ ꢃꢀ ꢇꢀ ꢄꢀ ꢈꢀ ꢅꢀꢀ ꢅꢅꢀ ꢅꢁꢀ ꢅꢉꢀ
Figure 1
ꢑMꢕꢖꢋꢎꢏ ꢏꢋMꢊꢋꢌꢑꢏꢔꢌꢋ (ꢗꢍ)
01 = Virtual Origin of Wave
T =Time from 10% to 90% of Peak
T1 = RiseTime = 1.25 xT
For applications exceeding 85ºC ambient temperature, the
peak surge current and energy ratings must be reduced as
shown above.
T2 = DecayTime
Example - For an 8/20 µs Current Waveform:
8µs =T1 = RiseTime
20µs =T2 = DecayTime
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/14/17
Metal-OxideVaristors (MOVs)
Radial Lead Varistors > UltraMOVTM 25S Varistor Series
TransientV-I Characteristic Curve
10000
750
625
550
510
460
440
420
385
1000
320
300
275
250
175
230
150
140
130
115
100
0.00001 0.0001
0.001
0.01
0.1
1
10
100
1000
10000
100000
Figure 3
P eak C u rren t (A )
Pulse Rating Curve
100000
1
2
15
10000
102
103
1000
100
10
104
105
106
∞
1
10
100
1000
10000
Figure 4
Impulse Duration (µs)
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/14/17
Metal-OxideVaristors (MOVs)
Radial Lead Varistors > UltraMOVTM 25S Varistor Series
Wave Solder Profile
Non Lead–freeWave Solder Profile
Lead–freeWave Solder Profile
300
300
250
200
150
100
50
Maximum Wave 260C
Maximum Wave 240C
250
200
150
100
50
0
0
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.5
1
1.5
2
2.5
3
3.5
4
ꢀꢁMꢂꢃMꢁꢄꢅꢀꢂꢆꢇ
TIME(MINUTES)
Figure 5
Figure 6
Physical Specifications
Environmental Specifications
-55°C to +85°C
Lead Material
Copper Clad Steel Wire
OperatingTemperature
StorageTemperature
Humidity Aging
Soldering
Characteristics
Solderability per MIL–STD–202,
Method 208
-55°C to +125°C
Cured, flame retardant epoxy polymer
meets UL94V–0 requirements
Insulating Material
Device Labeling
+85°C, 85% RH, 1000 hours
+/-10% typical voltage change
Marked with LF, voltage, UL/CSA Logos,
and date code
+85°C to -40°C 5 times
+/-10% typical voltage change
Thermal Shock
Solvent Resistance
Moisture Sensitivity
MIL–STD–202, Method 215
Level 1, J-STD-020
UltraMOV® 25SVaristor Series for High-Temperature Operating Conditions:
Phenolic coated devices are available with improved maximum operating temperature 125ºC.
These devices also have improved temperature cycling capability. Ratings and specifications
are per standard series except Hi–Pot Encapsulation (Isolation Voltage Capability) = 500V.
To order: add 'X1347' to part number (e.g. V25S150PX1347). These devices are NOT UL, CSA,
CECC or VDE certified.Contact factory for further details.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/14/17
Metal-OxideVaristors (MOVs)
Radial Lead Varistors > UltraMOVTM 25S Varistor Series
Product Dimensions (mm)
A
max
b
b
D
e
e
e1
min
e1
max
E
L
D
min max
max min max
max min
V25S115P
V25S130P
V25S140P
V25S150P
V25S175P
V25S230P
V25S250P
V25S275P
V25S300P
V25S320P
V25S385P
V25S420P
V25S440P
V25S460P
V25S510P
V25S550P
V25S625P
V25S750P
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.3
2.4
2.6
3.0
3.3
3.4
3.6
1.6
1.9
2.3
3.1
2.7
2.9
3.0
3.1
3.3
3.4
3.5
3.7
3.9
4.1
4.7
5.0
5.2
5.4
3.4
3.9
4.3
5.4
5.7
5.9
6.0
6.1
6.3
6.4
6.5
6.7
6.9
25.4
7. 1
32.5
0.95 1.05
28
11.7 13.7
b
e
7. 7
8.0
8.2
8.4
8.7
9.2
9.6
10.7
Notes
1. Additional optional lead form, packaging and lead spacing requirements are subject to availability and to minimum
order requirements. Please contact factory for details.
2. Nickel Barrier Wire option (Suffix 'X2855')Standard parts use Tin-Coated Copper wire. Nickel Barrier Coated Wire
is available as an option.This is CopperWire with a flashing of Nickel, followed by a top coat ofTin.To order please
add suffix 'X2855' to end of standard part number. Contact factory for more details if required.
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/14/17
相关型号:
©2020 ICPDF网 联系我们和版权申明