V510LS10CPX2855 [LITTELFUSE]
Varistor;Varistor Products
Radial Lead Varistors > C-III series
RoHS
C-III Varistor Series
Description
The C-III Series of Metal-Oxide Varistors (MOVs) are
specifically designed for applications requiring high surge
energy absorption ratings and superior multiple pulse
absorption rating. This is achieved through a special
dielectric material formulation which also results in
higher repetitive surge ratings than other MOV types.
The C-III Series is primarily intended for use in AC
lineTransient Voltage Surge Suppressor (TVSS)
product environment and other similar applications
requiring high transient energy and peak current
capability in a relatively small package size.
Agency Approvals
Features
Agency
Agency File Number
• Lead–free, Halogen-
Free and RoHS
compliant
• Available in tape and
reel for automatic
E320116
insertion; Also available
with crimped and/or
trimmed lead styles
• High energy
LR91788
116895
absorption capability
• No derating up to
85ºC ambient
WTM 40J to 530J (2ms)
• High pulse life rating
42201-006
• The C-III Series is
supplied in 10mm,
14mm and 20mm
disc versions with
various lead options
• High peak pulse
current capability
ITM 3500A to
10,000A (8/20μs)
• Wide operating
voltage range
VM(AC)RMS 130V to 1000V
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
Continuous
C-III Series
Units
Steady State Applied Voltage:
AC Voltage Range (VM(AC)RMS
)
130 to 1000
V
Transients:
Single-Pulse Peak Current (ITM) 8/20μs Wave
(See Peak Pulse Current Test Waveform)
3500 to 10,000
A
Single-Pulse Energy Range (WTM)2ms Rectangular Wave
Operating AmbientTemperature Range (TA)
40 to 530
-55 to +85
-55 to +125
<0.01
J
ºC
StorageTemperature Range (TSTG
)
ºC
Temperature Coefficient (aV) of Clamping Voltage (VC) at SpecifiedTest Current
Hi-Pot Encapsulation (COATING Isolation Voltage Capability)
COATING Insulation Resistance
%/ºC
V
2500
1000
MΩ
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only
rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is
not implied.
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/c-iii.html for current information.
113
C-IIIVaristor Series
Revised: June 5, 2013
Varistor Products
Radial Lead Varistors > C-III series
C-III Series Ratings
Maximum Ratings (85 °C)
Specifications (25 °C)
Maximum
Continuous
Transient
Varistor Voltage
Clamping
Voltage
(8/20μs)
Duty Cycle
at 1mA DCTest
Current
Peak Current
Surge Rating
Disc
Size
(mm)
(8/20μs)
ITM1 ITM2
Maximum Withstanding
Part Number
Branding
VRMS
Energy (2ms)
3kA
750A
VM(AC)
(V)
WTM
(
)
VN
Min
(V)
VN
Max
(V)
VC
(V)
Ip (8/20μs) (8/20μs)
1 Pulse 2 Pulses
(A)
(J)
(A)
#
#
(A)
Pulses Pulses
V130LA5CP
V130LA10CP
V130LA20CP
P130L5C
P130L10C
P130L20C
10
14
20
20
10
14
20
20
10
14
20
20
10
14
20
20
10
14
20
20
10
14
20
20
10
14
20
20
10
14
20
20
10
14
20
20
10
14
20
10
14
20
10
14
130
130
130
130
140
140
140
140
150
150
150
150
175
175
175
175
230
230
230
230
250
250
250
250
275
275
275
275
300
300
300
300
320
320
320
320
385
385
385
420
420
420
460
460
40
80
200
200
45
3500
6500
10000
10000
3500
3000
5000
7000
7000
3000
5000
7000
7000
3000
5000
7000
7000
3000
5000
7000
7000
3000
5000
7000
7000
3000
5000
7000
7000
3000
5000
7000
7000
3000
5000
7000
7000
3000
5000
7000
7000
3000
5000
7000
3000
5000
7000
3000
5000
184
184
184
184
198
198
198
198
212
212
212
212
247
247
247
247
324
324
324
324
354
354
354
354
389
389
389
389
420
420
420
420
462
462
462
462
558
558
558
610
610
610
640
640
228
228
228
220
242
242
242
230
268
268
268
243
303
303
303
285
396
396
396
384
429
429
429
413
473
473
473
453
517
517
517
490
565
565
565
540
682
682
682
748
748
748
790
790
340
340
340
325
360
360
360
340
395
395
395
360
455
455
455
425
595
595
595
570
650
650
650
620
710
710
710
680
775
775
775
745
25
50
100
100
25
2
20
80
120
120
20
10
20
20
2
10
20
20
2
10
20
20
2
10
20
20
2
10
20
20
2
10
20
20
2
10
20
20
2
10
20
20
2
V130LA20CPX325 P130X325
V140LA5CP
V140LA10CP
V140LA20CP
P140L5C
P140L10C
P140L20C
90
6500
50
80
210
210
50
100
215
215
55
110
220
220
60
125
280
280
65
135
300
300
70
145
320
320
75
155
335
335
80
165
345
345
85
10000
10000
3500
100
100
25
120
120
20
V140LA20CPX340 P140X340
V150LA5CP
V150LA10CP
V150LA20CP
P150L5C
P150L10C
P150L20C
6500
50
80
10000
10000
3500
100
100
25
120
120
20
V150LA20CPX360 P150X360
V175LA5CP
V175LA10CP
V175LA20CP
P175L5C
P175L10C
P175L20C
6500
50
80
10000
10000
3500
100
100
25
120
120
20
V175LA20CPX425 P175X425
V230LA10CP
V230LA20CP
V230LA40CP
P230L10C
P230L20C
P230L40C
6500
50
80
10000
10000
3500
100
100
25
120
120
20
V230LA40CPX570 P230X570
V250LA10CP
V250LA20CP
V250LA40CP
P250L10C
P250L20C
P250L40C
6500
50
80
10000
10000
3500
100
100
25
120
120
20
V250LA40CPX620 P250X620
V275LA10CP
V275LA20CP
V275LA40CP
P275L10C
P275L20C
P275L40C
6500
50
80
10000
10000
3500
100
100
25
120
120
20
V275LA40CPX680 P275X680
V300LA10CP
V300LA20CP
V300LA40CP
P300L10C
P300L20C
P300L40C
6500
50
80
10000
10000
3500
100
100
25
120
120
20
V300LA40CPX745 P300X745
V320LA10CP
V320LA20CP
V320LA40CP
P320L10C
P320L20C
P320L40C
850
850
850
810
1025
1025
1025 100
1120
1120
6500
50
10
20
20
2
10
20
2
10
20
2
80
10000
10000
3500
6500
10000
3500
6500
10000
3500
100
100
25
120
120
20
80
120
20
80
120
20
V320LA40CPX810 P320X810
V385LA10CP
V385LA20CP
V385LA40CP
V420LA10CP
V420LA20CP
V420LA40CP
V460LA10CP
V460LA20CP
P385L10C
P385L20C
P385L40C
P420L10C
P420L20C
P420L40C
P460L10C
P460L20C
175
370
90
185
390
95
50
25
50
1120 100
1190
1190
25
50
190
6500
10
80
114
Revised: June 5, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/c-iii.html for current information.
C-IIIVaristor Series
Varistor Products
Radial Lead Varistors > C-III series
C-III Series Specifications (continued from previous page)
Maximum Ratings (85 °C)
Specifications (25 °C)
Maximum
Continuous
Transient
Varistor Voltage
Clamping
Voltage
(8/20μs)
Duty Cycle
at 1mA DCTest
Current
Peak Current
Surge Rating
Disc
Size
(mm)
(8/20μs)
ITM1 ITM2
Maximum Withstanding
Part Number
Branding
VRMS
Energy (2ms)
3kA
Ip (8/20μs) (8/20μs)
(A)
750A
VM(AC)
(V)
WTM
(
)
VN
Min
(V)
VN
Max
(V)
VC
(V)
1 Pulse 2 Pulses
(A)
(J)
#
#
(A)
Pulses Pulses
V460LA40CP
V480LA10CP
V480LA40CP
V480LA80CP
V510LA10CP
V510LA40CP
V510LA80CP
V550LA10CP
V550LA40CP
V550LA80CP
V575LA10CP
V575LA40CP
V575LA80CP
V625LA10CP
V625LA40CP
V625LA80CP
V660LA10CP
V660LA50CP
V660LA80CP
V680LA10CP
V680LA80CP
V680LA100CP
V1000LA80CP
V1000LA160CP
P460L40C
P480L10C
P480L40C
P480L80C
P510L10C
P510L40C
P510L80C
P550L10C
P550L40C
P550L80C
P575L10C
P575L40C
P575L80C
P625L10C
P625L40C
P625L80C
P660L10C
P660L50C
P660L80C
P680L10C
P680L80C
P680L100C
P1000L8C
P1000L16C
20
10
14
20
10
14
20
10
14
20
10
14
20
10
14
20
10
14
20
10
14
20
14
20
460
480
480
480
510
510
510
550
550
550
575
575
575
625
625
625
660
660
660
680
680
680
1000
1000
430
95
195
420
98
205
440
98
210
450
100
230
460
105
235
490
110
240
510
115
240
520
260
530
10000
3500
6500
10000
3500
6500
10000
3500
6500
10000
3500
6500
10000
3500
6500
10000
3500
6500
10000
3500
6500
10000
6500
10000
7000
3000
5000
7000
3000
5000
7000
300
5000
7000
3000
5000
7000
3000
5000
7000
3000
5000
7000
3000
5000
7000
5000
7000
640
670
670
670
735
735
735
780
780
780
815
815
815
900
900
900
940
940
940
990
990
990
1500
1500
790
825
825
825
910
910
910
970
970
1190 100
20
2
10
20
2
10
20
2
10
20
2
10
20
2
10
20
2
10
20
2
10
20
10
20
120
20
80
120
20
80
120
20
80
120
20
80
120
20
80
120
20
80
120
20
80
120
80
120
1240
1240
25
50
1240 100
1350
1350
25
50
1350 100
1435
1435
25
50
970
1435 100
1000
1000
1000
1100
1100
1100
1210
1210
1210
1240
1210
1130
1800
1800
1500
1500
25
50
1500 100
1650
1650
25
50
1725 100
1820
1820
25
50
1820 100
1860
1820
25
50
1700 100
2700 50
2700 100
NOTES:
- Average power dissipation of transients not to exceed 0.6W and 1W for model sizes 14mm and 20mm, respectively.
- 7mm parts also available-contact factory for further information
- For additional or intermediary voltage ratings contact factory
Phenolic Coating Option -- C-III SeriesVaristors for Hi-Temperature Operating Conditions:
•
•
•
Phenolic Coated CIII Series devices are available with improved maximum operating maximum temperature 125ºC
These devices also have improved temperature cycling performance capability.
Ratings and Specifications are as per standard CIII Series except Hi–Pot
Encapsulation (Isolation Voltage Capability)=500V.
•
•
•
•
To order: add X1347 to part number (e.g. V230LA40CPX1347)
These devices are not UL, CSA, VDE or CECC certified.
Contact factory for further details.
Product marking:
LF 9
P230P40C
YYWW
Lead-Free,
Halogen-Free
& RoHS Compliant
Indicator
Phenolic Coated
Option
Identifier
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/c-iii.html for current information.
115
C-IIIVaristor Series
Revised: June 5, 2013
Varistor Products
Radial Lead Varistors > C-III series
Current Energy and Power Dissipation Ratings
Should transients occur in rapid succession, the average
power dissipation is the energy (watt-seconds) per pulse
times the number of pulses per second. The power so
developed must be within the specifications shown on the
Device Ratings and SpecificationsTable for the specific
device. The operating values of a MOV need to be derated
at high temperatures as shown above. Because varistors
only dissipate a relatively small amount of average power
they are not suitable for repetitive applications that involve
substantial amounts of average power dissipation.
Figure 1A - Power Derating for Epoxy Coated
Figure 1B - Power Derating for Phenolic Coated
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
-55 50
60
70
80
90 100 110 120 130 140 150
o
-55
50
60
70
80
90 100 110 120 130 140 150
o
AMBIENTTEMPERATURE ( C)
AMBIENTTEMPERATURE ( C)
Peak Pulse CurrentTestWaveform
100
90
01 = Virtual Origin of Wave
T =Time from 10% to 90% of Peak
T1 = RiseTime = 1.25 xT
T2 = DecayTime
50
Example - For an 8/20 μs Current Waveform:
8μs =T1 = RiseTime
20μs =T2 = DecayTime
10
O
T
TIME
1
T
1
Figure 2
T
2
TransientV-I Characteristics Curves
Pulse Rating Curves
Maximum ClampingVoltage for 10mm Parts
Repetitive Surge Capability for 10mm Parts
V130LA5C(P) –V625LA10C(P)
V130LA5C(P)-V320LA10C(P)
10,000
10000
MODEL SIZE = 10MM
o
o
C
MODEL SIZE = 10mm
T
= -55 C TO 85
A
o
o
1
2
130 to 625V
RATING
T
A
= -55 C TO 85 C
M(AC)
MAXIMUM CLAMP
VOLTAGE
15
1,000
100
10
230
250
275
104
105
106
300
102
103
510
320
420
550
625
440
385
460
1000
∞
175
150
140
130
1
100
0.001
10
100
1,000
10,000
0.01
0.1
1
10
PEAK CURRENT (A)
100
1000
10000
SURGE IMPULSE DURATION (μs)
Figure 4
Figure 3
116
Revised: June 5, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
C-IIIVaristor Series
Please refer to www.littelfuse.com/series/c-iii.html for current information.
Varistor Products
Radial Lead Varistors > C-III series
TransientV-I Characteristics Curves (continued)
Maximum ClampingVoltage for 14mm Parts
Pulse Rating Curves (continued)
Repetitive Surge Capability for 14mm Parts
V130LA10C(P) –V420LA20C(P)
V130LA10C(P)-V420LA20C(P)
10,000
10,000
MODEL SIZE = 14mm
1
o
o
15
2
T
A
= -55 C TO 85
C
MODEL SIZE = 14mm
2
10
V460LA20C(P)
V420LA20C(P)
V385LA20C(P)
1,000
100
10
V230LA20C(P)
3
10
10
V320LA20C(P)
V300LA20C(P)
4
V275LA20C(P)
V250LA20C(P)
1,000
∞
V175LA10C(P)
V150LA10C(P)
V140LA10C(P)
V130LA10C(P)
1
10
100
100
1,000
10,000
0.001
0.01
0.1
1
100
10000
10
1000
SURGE IMPULSE DURATION (μs)
Figure 5
Figure 6
Peak Amperes (A)
Maximum ClampingVoltage for 20mm Parts
Repetitive Surge Capability for 20mm Parts
V130LA20C(P)-V680LA100C(P)
V130LA5C(P) -V680LA10C (P)
10,000
V680LA100C(P)
MODEL SIZE = 20mm
10,000
1,000
100
V660LA100C(P)
1
o
o
T
= -55 C TO 85
C
2
A
15
10
V625LA80C(P)
MODEL SIZE = 20mm
2
V575LA80C(P)
V510LA80C(P)
3
4
10
V420LA40C(P) V460LA40C(P)
10
V480LA80C(P)
V385LA40C(P)
∞
1,000
V320LA40C(P)
10
V300LA40C(P)
V275LA40C(P)
V230LA40C(P)
V250LA40C(P)
V175LA20C(P)
V150LA20C(P)
V140LA20C(P)
1
V130LA20C(P)
100
10
100
1,000
10,000
0.01
0.1
1
100
Figure 7 0.001
10000
10
1000
SURGE IMPULSE DURATION (μs)
Figure 8
Peak Amperes (A)
Maximum ClampingVoltage for Low ClampingVoltage Parts
V130LA20CX325(P) -V300LA40CX245 (P)
10,000
V300LA40CX810(P)
V300LA40CX745(P)
V275LA40CX680(P)
V250LA40CX620(P)
1,000
V230LA40CX570(P)
V175LA20CX425(P)
V150LA20CX360(P)
V140LA20CX340(P)
V130LA20CX325(P)
100
1
1000
10000
0.001
10
0.01
0.1
100
Figure 9
Peak Amperes (A)
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/c-iii.html for current information.
117
Revised: June 5, 2013
C-IIIVaristor Series
Varistor Products
Radial Lead Varistors > C-III series
Wave Solder Profile
Non Lead–free Profile
Lead–free Profile
300
250
200
150
100
50
300
Maximum Wave 260C
Maximum Wave 240C
250
200
150
100
50
0
0
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.5
1
1.5
2
2.5
3
3.5
4
Figure 10
Figure 11
TIME(MINUTES)
TIME(MINUTES)
Physical Specifications
Environmental Specifications
Operating/Storage
Lead Material
Copper Clad Steel Wire
-55°C to +85°C/-55°C to +125°C
Temperature
Soldering
Characteristics
Solderability per MIL–STD–202,
Method 208E
+85°C, 85% RH, 1000 hours
+/-10% typical voltage change
Humidity Aging
Cured, flame retardant epoxy polymer
meets UL94V–0 requirements
Insulating Material
Device Labeling
+85°C to -40°C, 5 times
+/-10% typical voltage change
Thermal Shock
Marked with LF, voltage, UL/CSA Logos,
and date code
Solvent Resistance
Moisture Sensitivity
MIL–STD–202, Method 215F
Level 1, J–STD–020C
118
Revised: June 5, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
C-IIIVaristor Series
Please refer to www.littelfuse.com/series/c-iii.html for current information.
Varistor Products
Radial Lead Varistors > C-III series
AC Bias Reliability
The C-III Series MOVs were designed for use on the AC
line. The varistor is connected across the AC line and is
biased with a constant amplitude sinusoidal voltage. It
should be noted that the definition of failure is a shift in the
nominal varistor voltage (VN) exceeding +/-10%. Although
this type of varistor is still functioning normally after this
magnitude of shift, devices at the lower extremities of VN
tolerance will begin to dissipate more power.
HighTemperature Operating Life 125ºC for 1000 Hours
at Rated Bias
300
V130LA20C
250
200
150
100
Because of this possibility, an extensive series of
statistically designed tests were performed to determine
the reliability of the C-III type of varistor under AC bias
combined with high levels of temperature stress. To
date, this test has generated over 50,000 device hours of
operation at a temperature of 125ºC, although only rated at
85ºC. Changes in the nominal varistor voltage, measured at
1mA, of less than 2% have been recorded, as displayed in
the diagram at right.
0
100 200 300 400 500 600 700 800 900 1000 1100
TIME (HOURS)
Figure 12
Transient Surge Current/EnergyTransient Capability
The transient surge rating serves as an excellent figure
of merit for the C-III varistor. This inherent surge handling
capability is one of the C-III varistor’s best features.
The enhanced surge absorption capability results from
improved process uniformity and enhanced construction.
The homogeneity of the raw material powder and
improved control over the sintering and assembly
processes are contributing factors to this improvement.
Typical Repetitive Surge Current Capability of
C-III Series MOVs
500
450
400
V130LA20C
3kA (8/20μs)
In the low power AC mains environment, industry
standards (UL, IEC, NEMA and IEEE) all suggest that the
worst case surge occurrence will be 3kA. Such a transient
event may occur up to five times over the equipment life
time (approximately 10 years). While the occurences of
five 3kA transients is the required capability, the rated,
repetitive surge current for the C-III Series is 20 pulses
for the 20mm units and 10 pulses for the 14mm Series.
350
(RATED FOR 20 PULSES)
300
0
5
10
15
20
25
30
NUMBER OF SURGES
Figure 13
As a measure of the inherent device capability, samples
of the 20mm V130LA20C devices were subjected to
a worst case repetitive transient surges test. After 20
pulses, each of 3kA, there was negligible change in
the device characteristics. Changes in the clamping
voltage, measured at 100A, of less than 3% were
recorded, as shown in the upper diagram at right.
600
550
500
V175LA20C
750A (8/20μs)
450
400
350
Samples of the 20mm Series V175LA20C were subjected
to repetitive surge occurrences of 750A. Again, there was
negligible changes in any of the device characteristics
after 120 pulses, as shown in the lower diagram at right.
(RATED FOR 120 PULSES)
300
0
50
100
150
200
250
300
NUMBER OF SURGES
Figure 14
In both cases the inherent device capability is far
in excess of the expected worst case scenario.
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
119
Revised: June 5, 2013
C-IIIVaristor Series
Please refer to www.littelfuse.com/series/c-iii.html for current information.
Varistor Products
Radial Lead Varistors > C-III series
Product Dimensions (mm)
ØD
A
SEATING
PLANE
*
ATRIM
LTRIM
25.4
(1.00)
Øb
CRIMPED ANDTRIMMED LEADS
Radial lead types can be supplied with combination preformed
crimp and trimmed leads. This option is supplied to the
dimensions shown below.
e
e1
E
*Seating plane interpretation per IEC-60717
10mm Size
14mm Size
20mm Size
V
RMS Voltage
Model
Dimension
Min.
Max.
Min.
Max.
Min.
Max.
A
ØD
e
All
All
12.0 (0.472)
10.0 (0.394)
6.5 (0.256)
1.5 (0.059)
2.5 (0.098)
4.5 (0.177)
16.0 (0.630)
12.5 (0.492)
8.5 (0.335)
5.5 (0.216)
7.5 (0.295)
9.5 (0.374)
7.3 (0.287)
11.0 (0.433)
14.0 (0.551)
13.5 (0.531)
13.5 (0.531)
6.5 (0.256)
1.5 (0.059)
2.5 (0.098)
4.5 (0.177)
20.0 (0.787)
17.0 (0.669)
8.5 (0.335)
4.5 (0.177)
7.5 (0.295)
9.5 (0.374)
7.3 (0.287)
11.0 (0.433)
14.0 (0.551)
17.5 (0.689)
17.5 (0.689)
6.5 (0.256)
1.5 (0.059)
2.5 (0.098)
4.5 (0.177)
28.0 (1.102)
23.0 (0.906)
8.5 (0.335)
4.5 (0.177)
7.5 (0.295)
9.5 (0.374)
7.3 (0.287)
11.0 (0.433)
14.0 (0.551)
0.86 (0.034)
1.05 (0.041)
30.0 (1.18)
4.69 (0.185)
All
130 - 320
385 - 680
> 680
130 - 320
385 - 680
> 680
130 - 625
>625
e1
E
-
-
-
0.76 (0.030)
0.95 (0.037)
–
Øb
0.76 (0.030)
0.86 (0.034)
0.76 (0.030)
0.86 (0.034)
ATRIM
LTRIM
All
–
19.5 (0.768)
4.69 (0.185)
–
23.5 (0.925)
4.69 (0.185)
All
2.41 (0.095)
2.41 (0.095)
2.41 (0.095)
Dimensions are in millimeters (inches)
1. 10mm lead spacing also available. See additional lead style options.
2. 7mm and 12mm devices also available upon request. Contact factory for details.
120
Revised: June 5, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/c-iii.html for current information.
C-IIIVaristor Series
Varistor Products
Radial Lead Varistors > C-III series
Tape and Reel Specifications
•
(available for voltage ratings up to 550V only)
Model Size
10mm 14mm 20mm
Symbol
Description
CRIMPED LEADS "LT"
P
Pitch of Component
Feed Hole Pitch
25.4 -/+1.0
12.7 -/+ 0.2
8.85 -/+ 0.8
P0
P1
P
E
P2
DP
DP
Feed Hole Center to Pitch
DH
DH
Hole Center to Component
Center
P2
12.7 -/+ 0.7
F
Lead to Lead Distance
Component Alignment
Tape Width
7.50 -/+ 0.8
2.00 Max
h
C
SEATING
PLANE
H1
W
W0
W1
W2
18.25 -/+ 0.75
12.0 -/+ 0.3
9.125 -/+ 0.625
0.5 Max
W0 W2 W1
H0
b
Hold DownTape Width
Hole Position
W
Hold DownTape Position
D0
t
Height FromTape CenterTo
Component Base
P1
P0
F
H
19.0 -/+1.0
H0
H1
Seating Plane Height
16.0 -/+ 0.5
46.5
36 Max 40 Max
Max
Component Height
STRAIGHT LEADS "LS"
D0
t
Feed Hole Diameter
TotalTapeThickness
Component Alignment
Under crimp Width
4.0 -/+ 0.2
0.7 -/+ 0.2
3° Max
P
E
P2
DP
DP
DH
DH
p
U
8.0 Max
H1
W2 W1
W0
H
b
W
D0
t
P1
P0
F
UNDER-CRIMPED LEADS "LU"
P
E
P2
DP
DP
DH
DH
H1
U
W2 W1
W0
Ho
b
W
D0
t
P1
P0
F
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/c-iii.html for current information.
121
Revised: June 5, 2013
C-IIIVaristor Series
Varistor Products
Radial Lead Varistors > C-III series
Part Numbering System
OPTION CODES
BASE PART CODES
(See notes below)
(See Ratings & Specifications tables and notes below)
P
XXXXX
V XXXX LA XX C
See OPTIONS CODES notes below
For “VARISTOR”
V
M(AC)
(Three or four digits -- 130V to 1,000V)
For standard parts, use the BASE PART designator only.
For parts with non-standard options (such as additional form, packaging
and lead space options), use BASE PART + OPTION CODE.
OPTION CODE items are subject to availability and minimum order
requirements. Please contact a Littelfuse products representative for
additional information or questions
SERIES + PACKAGING / LEAD STYLE
DESIGNATOR
(See BASE PART CODES notes below)
LA = Bulk Pack / Straight Leads (standard)
LC = Bulk Pack / Crimped and Trimmed Leads
LS = Tape and Reel / Straight Leads
LT = Tape and Reel / Crimped Leads
LU = Tape and Reel / Under-Crimped Leads
RELATIVE ENERGY INDICATOR
(One or Two Digits)
C-III SERIES DESIGNATOR
LEAD-FREE, HALOGEN-FREE AND
RoHS COMPLIANT INDICATOR
Ordering Notes:
BASE PART CODES:
OPTION CODES:
Series + Packaging / Lead Style Designators:
Ordering examples:
X10: 10MM LEAD SPACING OPTION --
For 10 (-/+1)mm lead spacing (available on 20mm
diameter models only), append standard model
BASE PART number with "X10." Example:
Straight
Lead
Bulk Pack
(standard)
Crimped &
Trimmed
Lead
Straight
Lead
Tape & Reel
Under-Crimp
Lead
Tape & Reel
Bulk Pack
Standard Model
Order As
V130LA20CP V130LS20CP V130LC20CP V130LU20CP
V130LA20CP
V130LA20CPX10
Crimped leads are standard on LA Series varistors supplied in
tape and reel, denoted with "LT."
X2855: Nickel Barrier COATED WIRE OPTION --
All standard parts use tinned copper clad steel wire.
Nickel Barrier Coated wire is available as an option,
consisting of Copper wire with a flashing of Nickel
followed by a top coating ofTin. To order append standard
model BASE PART number with "X2855." Example:
"LC" style is supplied in bulk only.
"LU" style is supplied in tape & reel only.
For crimped leads without trimming and any varitions other than
that described above, please contact Littelfuse.
Packaging and Quantities:
Standard Model
Order As
Littelfuse C-III Series varistors are shipped standard in bulk pack
with straight leads and lead spacing outlined in the Package
Dimensions section of this data sheet.
V130LA20CP
V130LA20CPX2855
X1347: Hi-Temperature phenolic coating option --
Tape & Reel Quantities:
Phenolic Coated C-III Series devices are available with improved
maximum operating maximum temperature of 125°C.
Quantity Per Reel
Device Size
10mm
Voltage
"T" Reel
500
500
400
500
"S" Reel
500
500
400
500
"U"Reel
500
500
400
500
To order, add X1347 to end of part number
(Example: V230LA40CPX1347).
ALL
≤ 275V
≥ 275V
≤ 275V
≥ 275V
14mm
For additional information please refer to the section labeled
"Phenolic Coating Option" on the third page of this document
under the "Electrical Characteristics" table.
20mm
400
400
400
122
Revised: June 5, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
C-IIIVaristor Series
Please refer to www.littelfuse.com/series/c-iii.html for current information.
相关型号:
V510LS10P
Varistor, 675V, 63J, Through Hole Mount, RADIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
V510LS10PX10
Varistor, 675V, 63J, Through Hole Mount, RADIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
V510LS10PX2855
Varistor, 675V, 63J, Through Hole Mount, RADIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
V510LS40APX10
Varistor, 675V, 110J, Through Hole Mount, RADIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明