LL-484BGC1C-G3-3B_15 [LUCKY-LIGHT]
Bluish Green LED;
| 型号： | LL-484BGC1C-G3-3B_15 |
| 厂家： | 
LUCKY LIGHT ELECTRONIC |
| 描述： | Bluish Green LED |
| 文件： | 总7页 (文件大小：135K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Luckylight
4.8mm Round Wide Viewing Angle Type
Bluish Green LED
Technical Data Sheet
Part No.: LL-484BGC1C-G3-1B
Spec No.: A027X355
Approved: JoJo
Rev No.: V.2
Checked: Wu
Date: Jun/30/2009
Drawn: Yao
Page: 1 OF 7
Lucky Light Electronics Co., Ltd.
Http://www.luckylightled.com
Luckylight
Features:
◇ Choice of various viewing color.
◇ Viewing angle=80°.
◇ High efficiency.
◇ Selected minimum intensities.
◇ Available on tape and reel.
◇ The product itself will remain within RoHS compliant Version.
Descriptions:
◇ The series is specially designed for applications requiring higher brightness.
◇ The LED lamps are available with different colors, intensities.
Applications:
◇ TV set.
◇ Monitor.
◇ Telephone.
◇ Computer.
◇ Circuit board.
◇ Status indicators.
◇ Commercial use.
◇ Advertising Signs.
◇ Back lighting.
Spec No.: A027X355
Approved: JoJo
Rev No.: V.2
Checked: Wu
Date: Jun/30/2009
Drawn: Yao
Page: 2 OF 7
Lucky Light Electronics Co., Ltd.
Http://www.luckylightled.com
Luckylight
Package Dimension:
Part No.
Chip Material
InGaN
Lens Color
Source Color
Bluish Green
LL-484BGC1C-G3-1B
Water Clear
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25 mm (.010″) unless otherwise noted.
3. Protruded resin is 1.00 mm (.039″) max.
4. Specifications are subject to change without notice.
Spec No.: A027X355
Approved: JoJo
Rev No.: V.2
Checked: Wu
Date: Jun/30/2009
Drawn: Yao
Page: 3 OF 7
Lucky Light Electronics Co., Ltd.
Http://www.luckylightled.com
Luckylight
Absolute Maximum Ratings at Ta=25℃
Parameters
Symbol
Max.
120
100
30
Unit
mW
mA
mA
V
Power Dissipation
PD
IFP
IF
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Continuous Forward Current
Reverse Voltage
VR
5
-40℃ to +85℃
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
Tsld
-40℃ to +100℃
Lead Soldering Temperature
[4mm (.157″) From Body]
260℃ for 5 Seconds
Electrical Optical Characteristics at Ta=25℃
Parameters
Symbol Min. Typ. Max. Unit Test Condition
Luminous Intensity
(Note 1)*
IV
600 1000
---
---
mcd
Deg
IF=20mA
(Note 2)
Viewing Angle*
2θ1/2
---
---
80
Peak Emission Wavelength
Dominant Wavelength
Spectrum Radiation Bandwidth
Forward Voltage
λp
λd
Δλ
VF
IR
500
---
---
---
nm
nm
nm
V
IF=20mA
IF=20mA
IF=20mA
IF=20mA
VR=5V
---
---
505
30
2.80 3.20 4.00
--- --- 10
Reverse Current
µA
Notes:
1. Luminous Intensity Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
Spec No.: A027X355
Approved: JoJo
Rev No.: V.2
Checked: Wu
Date: Jun/30/2009
Drawn: Yao
Page: 4 OF 7
Lucky Light Electronics Co., Ltd.
Http://www.luckylightled.com
Luckylight
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Forward Current & Forward Voltage
Spectrum Distribution
Ta=25℃
Ta=25℃
100
75
50
25
0
50
40
30
20
10
0
300 400 500 600 700 800
2.8 3.0 3.2 3.4 3.6 3.8 4.0
Forward Voltage VF (V)
Wavelength λp (nm)
Luminous Intensity &
Ambient Temperature
Luminous Intensity & Forward Current
Ta=25℃
1000
1000
f=1KHz
Duty=1/10
100
10
1
100
10
1
-60 -40 -20 0 20 40 60 80 100
100
101
102
103
Ambient Temperature Ta (℃)
Forward Current IF (mA)
Radiation Diagram
Forward Current Derating Curve
50
Ta=25℃
0o 10o 20o
30o
40
40o
50o
30
25
20
1.0
0.9
0.8
60o
10
0
70o
80o
90o
0.7
0.5 0.3 0.10 0.2 0.4 0.6
0
20
40
60
80 100
Ambient Temperature Ta (℃)
Spec No.: A027X355
Approved: JoJo
Rev No.: V.2
Checked: Wu
Date: Jun/30/2009
Drawn: Yao
Page: 5 OF 7
Lucky Light Electronics Co., Ltd.
Http://www.luckylightled.com
Luckylight
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
1) Test Items and Results:
Number
Standard
Test
Method
of
Damage
d
Test Item
Test Conditions
Note
Tsld=260±5℃, 10sec 3mm
from the base of the epoxy
bulb
Resistance to Soldering
Heat
JEITA ED-4701
300 302
1 time
0/100
Tsld=235±5℃, 5sec(using
flux)
JEITA ED-4701
300 303
JEITA ED-4701
300 307
JEITA ED-4701
100 105
JEITA ED-4701
200 203
JEITA ED-4701
200 201
JEITA ED-4701
400 401
JEITA ED-4701
400 401
JEITA ED-4701
100 103
1time
over 95%
Solder ability
Thermal Shock
0/100
0/100
0/100
0/100
0/100
0/100
0/100
0/100
0/100
0/100
0℃~100℃ 15sec, 15sec
100 cycles
100 cycles
10 cycles
1000hrs
-40℃~25℃~100℃~25℃
30min,5min,30min,5min
25℃~65℃~-10℃ 90%RH
24hrs/1cycle
Temperature Cycle
Moisture Resistance
Cycle
High Temperature
Storage
Terminal Strength
(Pull test)
Terminal Strength
(bending test)
Temperature Humidity
Storage
Ta=100℃
Load 10N (1kgf)
10±1sec
Load 5N (0.5kgf)
0°~90°~0° bend 2 times
No noticeable
damage
No noticeable
damage
Ta=60℃, RH=90%
1000hrs
1000hrs
1000hrs
Low Temperature
Storage
Steady State Operating
Life
JEITA ED-4701
200 202
Ta=-40℃
Ta=25℃, IF＝30mA
Steady State Operating
Life of High Humidity
Heat
Steady State Operating
Life of Low
Ta=60℃, RH=90%,
500hrs
0/100
0/100
IF=30mA
Ta=-30℃, IF＝20mA
1000hrs
Temperature
2) Criteria For Judging The Damage:
Criteria for Judgment
Item
Symbol
Test Conditions
Min
---
Max
F.V.*)×1.1
F.V.*)×2.0
---
IF＝20mA
Forward Voltage
Reverse Current
VF
IR
IV
VR=5V
---
IF＝20mA
Luminous Intensity
*) F.V.: First Value.
F.V.*)×0.7
Spec No.: A027X355
Approved: JoJo
Rev No.: V.2
Checked: Wu
Date: Jun/30/2009
Drawn: Yao
Page: 6 OF 7
Lucky Light Electronics Co., Ltd.
Http://www.luckylightled.com
Luckylight
Please read the following notes before using the product:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is
often started at the time of the hand solder.
4. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
5. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or
anti-electrostatic glove when handling the LED. All devices equipment and machinery must be
properly grounded.
Spec No.: A027X355
Approved: JoJo
Rev No.: V.2
Checked: Wu
Date: Jun/30/2009
Drawn: Yao
Page: 7 OF 7
Lucky Light Electronics Co., Ltd.
Http://www.luckylightled.com
相关型号：
LL-484BGC1C-G3-3F
4.8mm Round Wide Viewing Angle Type Bluish Green LED Technical Data Sheet
LUCKY-LIGHT
LL-484PGC1C-G5-2C
4.8mm Round Wide Viewing Angle Type Pure Green LED Technical Data Sheet
LUCKY-LIGHT
LL-484PGC1C-G5-3B
4.8mm Round Wide Viewing Angle Type Pure Green LED Technical Data Sheet
LUCKY-LIGHT
©2020 ICPDF网 联系我们和版权申明