L130-2780HE1400006 [LUMILEDS]
Single Color LED,;
| 型号： | L130-2780HE1400006 |
| 厂家： | 
LUMILEDS LIGHTING COMPANY |
| 描述： | Single Color LED, |
| 文件： | 总21页 (文件大小：2630K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IllumInatIon
luXEon 3030 2D liꢀe
High flux, hot-color targeted 6V package
LUXEON 3030 2D is a high flux, hot-color targeted mid power LED.
Hot-color targeting ensures that the LEDs are within color target at
application conditions—85°C. Using an industry standard packaging of
3.0mm x 3.0mm and 6V surface-mount emitter solution, LUXEON 3030
2D Line comes in all ANSI CCTs and delivers the efficacy and reliability
required for both indoor and outdoor illumination markets.
FEaturEs anD BEnEFIts
PrImary aPPlIcatIons
Industry standard package enables drop-in replacement for existing
3030 packages
Downlights
High Bay & Low Bay
Lamps
1/9th micro-color binning enables tight color control
Superior luminous flux at max current for reduced LED count
Hot-color targeting ensures that color is within ANSI bin at typical
application conditions, 85°C
Outdoor
Enables 3-, 4-, 5-step MacAdam ellipse custom binning kits
No. E352519
DS207 LUXEON 3030 2D Line Product Datasheet ©2018 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Product Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2
Product Test Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3
Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 4
Characteristics Curves ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Product Bin and Labeling Definitions ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 9
Decoding Product Bin Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Color Bin Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mechanical Dimensionsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 15
Reflow Soldering Guidelines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 16
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Packaging Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 18
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DS207 LUXEON 3030 2D
General Product Information
Product Test Conditions
LUXEON 3030 2D Line LEDs are tested with a 20ms monopulse of 120mA at a junction temperature, Tj, of 25°C. Forward voltage
and luminous flux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 85°C.
Part Number Nomenclature
Part numbers for LUXEON 3030 2D Line follow the convention below:
L 1 3 0 – A A B B 0 0 3 0 0 0 C 2 D
Where:
A A
–
designates nominal CCT (22=2200K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K,
57=5700K, 65=6500K)
B B
C
–
–
–
designates minimum CRI (70=70CRI, 80=80CRI and 90=90CRI)
designates package type (W=Round LES, X=Square LES)
D
designates Lumileds internal code (1, 2, 3, etc.=shares the same base part)
Therefore, the following part number is used for a LUXEON 3030 2D (Square LES), 3000K 80CRI:
L 1 3 0 – 3 0 8 0 0 0 3 0 0 0 X 2 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3030
2D Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON 3030 2D Line at 120mA and 65mA at specified temperature.
lumInous FluX [2, 3] (ꢁꢂ)
tyPIcal
tyPIcal
tyPIcal
lumInous
lumInous
lumInous
nomInal mInImum
ProDuct
Part numBEr
EFFIcacy (ꢁꢂ/W) FluX (ꢁꢂ) EFFIcacy (ꢁꢂ/W)
cct [1]
crI [2, 3]
mInImum
tyPIcal
120ꢂa
117
119
122
122
122
122
94
65ꢂa
3000K
3500K
4000K
5000K
5700K
6500K
2200K
2700K
3000K
3500K
4000K
5000K
5700K
6500K
2700K
3000K
3500K
4000K
5000K
3000K
3500K
4000K
5000K
5700K
6500K
2200K
2700K
3000K
3500K
4000K
5000K
5700K
6500K
2700K
3000K
3500K
4000K
5000K
70
70
70
70
70
70
80
80
80
80
80
80
80
80
90
90
90
90
90
70
70
70
70
70
70
80
80
80
80
80
80
80
80
90
90
90
90
90
98
100
101
101
101
101
80
163
165
169
169
169
169
131
149
151
157
164
164
164
164
125
128
132
136
136
168
171
176
176
175
171
138
156
157
163
168
168
168
168
132
136
140
144
144
67
68
70
70
70
70
54
61
62
64
67
67
67
67
51
52
54
56
56
69
70
72
72
72
70
56
64
64
67
69
69
69
69
54
56
58
59
59
180
183
188
188
188
188
145
165
168
174
182
182
182
182
138
142
146
151
151
186
189
195
195
194
189
152
172
174
180
186
186
186
186
146
151
155
160
160
L130-3070003000W21
L130-3570003000W21
L130-4070003000W21
L130-5070003000W21
L130-5770003000W21
L130-6570003000W21
L130-2280003000W21
L130-2780003000W21
L130-3080003000W21
L130-3580003000W21
L130-4080003000W21
L130-5080003000W21
L130-5780003000W21
L130-6580003000W21
L130-2790003000W21
L130-3090003000W21
L130-3590003000W21
L130-4090003000W21
L130-5090003000W21
L130-3070003000X21
L130-3570003000X21
L130-4070003000X21
L130-5070003000X21
L130-5770003000X21
L130-6570003000X21
L130-2280003000X21
L130-2780003000X21
L130-3080003000X21
L130-3580003000X21
L130-4080003000X21
L130-5080003000X21
L130-5780003000X21
L130-6580003000X21
L130-2790003000X21
L130-3090003000X21
L130-3590003000X21
L130-4090003000X21
L130-5090003000X21
80
107
109
113
118
118
118
118
90
85
LUXEON
3030 2D
(Round
LES)
85
90
90
90
90
72
75
92
75
95
75
98
75
98
110
111
117
117
117
111
89
121
123
127
127
126
123
99
101
102
107
110
110
110
110
86
112
113
117
121
121
121
121
95
LUXEON
3030 2D
(Square
LES)
88
98
91
101
104
104
94
94
Notes for Table 1:
1. Correlated color temperature is hot targeted at Tj=85°C.
2. Luminous flux and CRI are specified at Tj=25°. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
3. Lumileds maintains a tolerance of ±2 on CRI and ±7.5% on luminous flux measurements.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Table 2ꢀ Optical characteristics for LUXEON 3030 2D Line at 120mA, Tj=25ºCꢀ
Part numBEr
tyPIcal total IncluDED anGlE [1]
140°
tyPIcal VIEWInG anGlE [2]
L130-xxxx003000x21
116°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
Electrical and Thermal Characteristics
Table 3ꢀ Electrical and thermal characteristics for LUXEON 3030 2D Line at 120mA, Tj=25ºCꢀ
ForWarD VoltaGE [1] (Vf)
tyPIcal tEmPEraturE
tyPIcal thErmal
rEsIstancE—JunctIon
to solDEr PaD (°c/W)
Part numBEr
coEFFIcIEnt oF ForWarD
VoltaGE [2] (ꢂV/°c)
mInImum
5.8
tyPIcal
maXImum
6.6
L130-xxxx003000x21
6.0
-2.0 to -4.0
12.0
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4ꢀ Absolute maximum ratings for LUXEON 3030 2D Lineꢀ
ParamEtEr
maXImum PErFormancE
DC Forward Current[1]
Peak Pulsed Forward Current[2]
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
LED Junction Temperature (DC & Pulse)
Operating Case Temperature
240mA
300mA
Class 2
125°C
-40°C to 105°C
-40°C to 105°C
JEDEC 020D 260°C
3
LED Storage Temperature
Soldering Temperature
Allowable Reflow Cycles
[3]
Reverse Voltage (Vreverse
)
-5V
Notes for Table 4:
1. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple”, are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed 25% of the maximum allowable DC forward current
2. Pulse operation with the maximum peak pulse forward current is acceptable if the pulse on time is ≤5ms per cycle and the duty cycle is ≤50%
3. At a maximum reverse current of 10µA. LUXEON 3030 2D LEDs are not designed to be driven in reverse bias.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
4
Characteristics Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for L130-xx70003000x21 at 120mA, Tj=25°Cꢀ
Figure 1b. Typical normalized power vs. wavelength for L130-xx80003000x21 at 120mA, Tj=25°Cꢀ
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
5
Figure 1c. Typical normalized power vs. wavelength for L130-xx90003000x21 at 120mA, Tj=25°Cꢀ
Light Output Characteristics
Junction Temperature [°C]
Figure 2. Typical normalized light output vs. junction temperature for L130-xxxx003000x21 at 120mAꢀ
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
6
EstImatED tyPIcal ratIo comParED to FluX at ratED conDItIon 120ꢂa, tj=25°c.
60mA
53%
65mA
57%
100mA
150mA
121%
200mA
85%
154%
Figure 3. Typical normalized light output vs. forward current for L130-xxxx003000x21 at Tj=25°Cꢀ
Forward Current Characteristics
Figure 4. Typical forward current vs. forward voltage for L130-xxxx003000x21 at Tj=25°Cꢀ
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
7
Radiation Pattern Characteristics
Figure 5. Typical radiation pattern for L130-xxxx003000x21 at 120mA, Tj=25ºCꢀ
Figure 6. Typical polar radiation pattern for L130-xxxx003000x21 at 120mA, Tj=25ºCꢀ
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
8
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON 3030 2D Line LEDs are labeled using a 4- or 5-digit alphanumeric CAT code following the format below.
A B C D or A x B C D
A
–
–
–
–
designates luminous flux bin (example: H=90 to 95 lumens, M=110 to 115 lumens)
designates Lumileds internal code
x
B C
D
designates color bin (example: 7D, 7E, 7F, 7G, 7H, 7J, 7K, 7L or 7M for 3000K parts)
designates forward voltage bin (example: G=5.8 to 6.0V, J=6.2 to 6.4V)
Therefore, a LUXEON 3030 2D with a lumen range of 90 to 95, color bin of 7J, and a forward voltage range of 5.8 to 6.0V has the
following CAT code:
H 7 J G
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON 3030 2D Line emitters. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON 3030 2D Line at 120mA, Tj=25°Cꢀ
lumInous FluX [1] (ꢁꢂ)
BIn
mInImum
70
maXImum
75
D
E
75
80
F
80
85
G
H
J
85
90
90
95
95
100
105
110
115
120
125
130
135
140
145
K
L
100
105
110
115
120
125
130
135
140
M
N
P
Q
R
S
T
Notes for Table 5:
1. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
9
Color Bin Definition
Figure 7. 3- and 5-step MacAdam ellipse illustration for Tables 6a-6h.
0.450
0.440
ANSI 2200K
0.430
AJ
AK
AF
AE
AD
0.420
0.410
0.400
0.390
0.380
AG
AH
AL
AM
0.470
0.480
0.490
0.500
CIE 1931 x
0.510
0.520
0.530
Figure 8aꢀ 1/9th color bin structure for LUXEON 3030 2D Line 2200K, hot-color targeted at 85°C.
Table 6a. 3- and 5-step MacAdam ellipse color bin definitions for L130-22xx003000x21 at test current, hot-color targeted at 85°C.
cEntEr PoInt [1]
(ꢃx, ꢃꢄ)
maJor aXIs,
ꢅ
mInor aXIs,
b
EllIPsE rotatIon
nomInal cct
color sPacE
Angle, Θ
2200K
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.5018, 0.4153)
(0.5018, 0.4153)
0.008625
0.014375
0.003975
0.006625
49.27°
49.27°
2200K
Notes for Table 6a:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
10
0.450
0.440
0.430
0.420
0.410
0.400
0.390
0.380
0.370
8J
8E
8K
8F
8D
8G
8H
8L
8M
2580K
2870K
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CIE 1931 x
Figure 8bꢀ 1/9th color bin structure for LUXEON 3030 2D Line 2700K, hot-color targeted at 85°C.
Table 6b. 3- and 5-step MacAdam ellipse color bin definitions for L130-27xx003000x21 at test current, hot-color targeted at 85°C.
cEntEr PoInt [1]
(ꢃx, ꢃꢄ)
maJor aXIs,
ꢅ
mInor aXIs,
b
EllIPsE rotatIon
nomInal cct
color sPacE
Angle, Θ
2700K
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
(0.4578, 0.4101)
0.00810
0.00420
0.00700
53.70°
53.70°
2700K
0.01350
Notes for Table 6b:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.445
0.435
0.425
0.415
7K
7J
7E
7D
7F
0.405
0.395
0.385
0.375
0.365
7G
7L
7H
7M
2870K
3200K
0.4050.4100.4150.4200.4250.4300.4350.4400.4450.4500.4550.4600.465
CIE 1931 x
Figure 8cꢀ 1/9th color bin structure for LUXEON 3030 2D Line 3000K, hot-color targeted at 85°C.
Table 6c. 3- and 5-step MacAdam ellipse color bin definitions for L130-30xx003000x21, hot-color targeted at 85°C.
cEntEr PoInt [1]
(ꢃx, ꢃꢄ)
maJor aXIs,
ꢅ
mInor aXIs,
b
EllIPsE rotatIon
nomInal cct
color sPacE
Angle, Θ
3000K
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.4338, .04030)
(0.4338, .04030)
0.00834
0.01390
0.00408
53.22°
53.22°
3000K
0.00680
Notes for Table 6c:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
11
0.420
0.410
0.400
0.390
0.380
0.370
0.360
6K
6F
6J
6E
6D
y
6G
6L
6H
6M
3250K
3750K
0.380
0.390
0.400
0.410
0.420
0.430
0.440
x
Figure 8dꢀ 1/9th color bin structure for LUXEON 3030 2D Line 3500K, hot-color targeted at 85°C.
Table 6d. 3- and 5-step MacAdam ellipse color bin definitions for L130-35xx003000x21, hot-color targeted at 85°C.
cEntEr PoInt [1]
(ꢃx, ꢃꢄ)
maJor aXIs,
ꢅ
mInor aXIs,
b
EllIPsE rotatIon
nomInal cct
color sPacE
Angle, Θ
3500K
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.4073, 0.3917)
(0.4073, 0.3917)
0.00927
0.00414
54.00°
54.00°
3500K
0.01545
0.00690
Notes for Table 6d:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.420
0.410
0.400
0.390
5K
5F
5E
5J
5D
5G
0.380
0.370
0.360
0.350
0.340
5L
3750K
5H
5M
4250K
0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410
CIE 1931 x
Figure 8eꢀ 1/9th color bin structure for LUXEON 3030 2D Line 4000K, hot-color targeted at 85°C.
Table 6e. 3- and 5-step MacAdam ellipse color bin definitions for L130-40xx003000x21, hot-color targeted at 85°C.
cEntEr PoInt [1]
(ꢃx, ꢃꢄ)
maJor aXIs,
ꢅ
mInor aXIs,
b
EllIPsE rotatIon
nomInal cct
color sPacE
Angle, Θ
4000K
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
(0.3818, 0.3797)
0.00939
0.00402
53.72°
53.72°
4000K
0.01565
0.00670
Notes for Table 6e:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
12
0.390
0.380
0.370
0.360
0.350
0.340
0.330
0.320
3K
3F
3J
3G
3E
3H
3D
3L
4750K
3M
5250K
0.325
0.330
0.335
0.340
0.345
0.350
0.355
0.360
0.365
x
Figure 8fꢀ 1/9th color bin structure for LUXEON 3030 2D Line 5000K, hot-color targeted at 85°C.
Table 6f. 3- and 5-step MacAdam ellipse color bin definitions for L130-50xx003000x21, hot-color targeted at 85°C.
cEntEr PoInt [1]
(ꢃx, ꢃꢄ)
maJor aXIs,
ꢅ
mInor aXIs,
b
EllIPsE rotatIon
nomInal cct
color sPacE
Angle, Θ
5000K
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
(0.3447, 0.3553)
0.00822
0.01370
0.00354
0.00590
59.62°
59.62°
5000K
Notes for Table 6f:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.370
0.360
2K
0.350
2F
2J
2G
2E
2D
0.340
0.330
0.320
0.310
y
2L
5250K
2H
2M
6000K
0.310
0.315
0.320
0.325
0.330
0.335
0.340
0.345
0.350
x
Figure 8gꢀ 1/9th color bin structure for LUXEON 3030 2D Line 5700K, hot-color targeted at 85°C.
Table 6g. 3- and 5-step MacAdam ellipse color bin definitions for L130-57xx003000x21, hot-color targeted at 85°C.
cEntEr PoInt [1]
(ꢃx, ꢃꢄ)
maJor aXIs,
ꢅ
mInor aXIs,
b
EllIPsE rotatIon
nomInal cct
color sPacE
Angle, Θ
5700K
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
(0.3287, 0.3417)
0.00746
0.00320
59.09°
59.09°
5700K
0.01243
0.00533
Notes for Table 6g:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
13
0.365
0.355
0.345
0.335
0.325
0.315
0.305
0.295
1K
1F
1G
1J
1E
1D
1L
6000K
1H
1M
7000K
0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335
x
Figure 8hꢀ 1/9th color bin structure for LUXEON 3030 2D Line 6500K, hot-color targeted at 85°C.
Table 6h. 3- and 5-step MacAdam ellipse color bin definitions for L130-65xx003000x21, hot-color targeted at 85°C.
cEntEr PoInt [1]
(ꢃx, ꢃꢄ)
maJor aXIs,
ꢅ
mInor aXIs,
b
EllIPsE rotatIon
nomInal cct
color sPacE
Angle, Θ
6500K
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
(0.3123, 0.3282)
0.00669
0.01115
0.00285
0.00475
58.57°
58.57°
6500K
Notes for Table 6h:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
Forward Voltage Bins
Table 7. Forward voltage bin definitions for LUXEON 3030 2D Line, Tj=25°Cꢀ
ForWarD VoltaGE [1] (Vf)
BIn
mInImum
maXImum
G
H
J
5.8
6.0
6.2
6.4
6.0
6.2
6.4
6.6
K
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
14
Mechanical Dimensions
Figure 9a. Mechanical dimensions for LUXEON 3030 2D (Round LES).
Figure 9b. Mechanical dimensions for LUXEON 3030 2D (Square LES).
Notes for Figures 9a and 9b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Tolerance: ±0.10mm.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
15
Reflow Soldering Guidelines
tp
Tp
Critical Zone
L to Tp
Ramp-up
T
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 8.
Table 8. Reflow profile characteristics for LUXEON 3030 2D Line.
ProFIlE FEaturE
Preheat Minimum Temperature (Tsmin
Preheat Maximum Temperature (Tsmax
lEaD FrEE assEmBly
)
150°C
200°C
)
Preheat Time (tsmin to tsmax
)
60 to 120 seconds
3°C / second maximum
217°C
Ramp-Up Rate (TL to Tp)
Liquidus Temperature (TL)
Time Maintained Above Temperature TL (tL)
Peak / Classification Temperature (Tp)
Time Within 5°C of Actual Temperature (tp)
Ramp-Down Rate (Tp to TL)
60 to 150 seconds
260°C
20 to 40 seconds
6°C / second maximum
8 minutes maximum
Time 25°C to Peak Temperature
Notes for Table 8:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
JEDEC Moisture Sensitivity
Table 9ꢀ Moisture sensitivity levels for LUXEON 3030 2D Lineꢀ
Floor lIFE
soak rEquIrEmEnts stanDarD
lEVEl
tImE
conDItIons
tImE
conDItIons
3
168 Hours
30°C / 60% RH
192 Hours +5 / -0
30°C / 60% RH
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
16
Solder Pad Design
0.58
0.48
0.05
Solder mask
Stencil
0.13
Top copper
Package geometric center
1.33
1.53
0.69
Figure 11ꢀ Recommended PCB solder pad layout for LUXEON 3030 2D Lineꢀ
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
17
Packaging Information
Pocket Tape Dimensions
Figure 12a. Pocket tape dimensions for LUXEON 3030 2D (Round LES).
Figure 12b. Pocket tape dimensions for LUXEON 3030 2D (Square LES).
Notes for Figures 12a and 12b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
18
Reel Dimensions
Figure 13a. Reel dimensions for LUXEON 3030 2D (Round LES).
Figure 13b. Reel dimensions for LUXEON 3030 2D (Square LES).
Notes for Figures 13a and 13b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
19
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
©2018 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS207 LUXEON 3030 2D Line
Product Datasheet 20180405
相关型号：
©2020 ICPDF网 联系我们和版权申明