L150-3070500600000_技术文档

IllumInatIon

luXEon 5050

High eﬃcacy and lumens in a multi-die, high

power package, enabling low system costs

LUXEON 5050 is a multi-die, high power package that provides high

luminance from a single package to enable cost eﬀective, single optic and

directional ﬁxture designs. LUXEON 5050 uses an industry standard 5050

surface mount package with the smallest round Light Emitting Surface

(LES). LUXEON 5050 comes in 70CRI, 80CRI and 90CRI with a wide range

of CCTs, and oﬀers hot-color targeting to ensure that the LEDs are within

color target at application conditions of 85°C.

FEaturEs and BEnEFIts

PrImary aPPlIcatIons

Small LES (4.6mm) enables good optic design for great punch

Enables highest eﬃcacy system design by driving at low current

Hot-color targeting ensures color is within ANSI bin at 85°C

Binned within 3-step and 5-step MacAdam ellipse, ensuring color uniformity

Compatible with low cost and high eﬃcacy drivers

Downlights

High Bay & Low Bay

Lamps

Outdoor

Spotlights

No. E352519

Table of Contents

General Product Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2

Product Test Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Performance Characteristics ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3

Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Absolute Maximum Ratings ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 4

Characteristic Curves ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 5

Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Product Bin and Labeling Deﬁnitions ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 10

Decoding Product Bin Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Color Bin Deﬁnitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Mechanical Dimensionsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 12

Reﬂow Soldering Guidelines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 13

JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Packaging Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 14

Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

i

General Product Information

Product Test Conditions

LUXEON 5050 LEDs are tested with a 20ms monopulse of 160mA for LUXEON 5050 24V and 640mA for LUXEON 5050 6V at a

junction temperature, T_j, of 25°C. Forward voltage and luminous ﬂux are binned at a T_jof 25°C, while color is hot targeted at a

T_jof 85°C.

Part Number Nomenclature

Part numbers for LUXEON 5050 follow the convention below:

L 1 5 0 – A A B B 5 0 C C 0 0 0 0 0

Where:

A A

B B

C C

–

designates nominal ANSI CCT (27=2700K, 30=3000K, 35=3500K 40=4000K, 50=5000K, 57=5700K, 65=6500K)

designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI)

designates voltage (06=6V, 24=24V)

Therefore, the following part number is used for a LUXEON 5050, 3000K 80CRI, 24V:

L 1 5 0 – 3 0 8 0 5 0 2 4 0 0 0 0 0

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 5050 is

compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the

RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted

materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

2

Performance Characteristics

Product Selection Guide

Table 1ꢀ Product performance of LUXEON 5050 at test current, T_j=25°Cꢀ

lumInous FluX ^{[2, 3]}(ꢀꢁ)

tEst

currEnt

(ꢁa)

nomInal

cct ^[1]

mInImum

crI ^{[2, 3]}

tyPIcal lumInous

EFFIcacy (ꢀꢁ/W)

VoltaGE

Part numBEr

mInImum

535

553

580

570

500

516

527

539

414

428

445

456

535

553

580

570

500

516

527

539

414

428

445

456

tyPIcal

600

620

650

560

585

595

610

471

486

506

526

600

620

650

560

585

595

610

471

486

506

526

2700K

3000K

4000K

5000K

5700K

6500K

2700K

3000K

3500K

4000K

5000K

5700K

6500K

2700K

3000K

3500K

4000K

5000K

5700K

2700K

3000K

4000K

5000K

5700K

6500K

2700K

3000K

3500K

4000K

5000K

5700K

6500K

2700K

3000K

3500K

4000K

5000K

5700K

70

80

90

70

80

90

153

158

166

143

149

152

156

120

124

129

134

153

158

166

143

149

152

156

120

124

129

134

160

640

L150-2770502400000

L150-3070502400000

L150-4070502400000

L150-5070502400000

L150-5770502400000

L150-6570502400000

L150-2780502400000

L150-3080502400000

L150-3580502400000

L150-4080502400000

L150-5080502400000

L150-5780502400000

L150-6580502400000

L150-2790502400000

L150-3090502400000

L150-3590502400000

L150-4090502400000

L150-5090502400000

L150-5790502400000

L150-2770500600000

L150-3070500600000

L150-4070500600000

L150-5070500600000

L150-5770500600000

L150-6570500600000

L150-2780500600000

L150-3080500600000

L150-3580500600000

L150-4080500600000

L150-5080500600000

L150-5780500600000

L150-6580500600000

L150-2790500600000

L150-3090500600000

L150-3590500600000

L150-4090500600000

L150-5090500600000

L150-5790500600000

24V

6V

Notes for Table 1:

1. Correlated color temperature is hot targeted at T=85°C.

2. Luminous ﬂux and CRI are based upon mounted ^jpackage on highly reﬂective surface at T_j=25°C. Typical CRI is approximately 2 points higher than the minimum CRI speciﬁed, but this

is not guaranteed.

3. Lumileds maintains a tolerance of ±2 on CRI and ±7% on luminous ﬂux measurements.

3

Optical Characteristics

Table 2ꢀ Optical characteristics for LUXEON 5050 at test current, T_j=25°Cꢀ

Part numBEr

tyPIcal total IncludEd anGlE ^[1]

138°

tyPIcal VIEWInG anGlE ^[2]

L150-xxxx50xx00000

116°

Notes for Table 2:

1. Total angle at which 90% of total luminous ﬂux is captured.

2. Viewing angle is the oﬀ axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3ꢀ Electrical and thermal characteristics for LUXEON 5050 at test current, T_j=25°Cꢀ

ForWard VoltaGE ^[1](V_f)

tyPIcal tEmPEraturE

tyPIcal thErmal

rEsIstancE—JunctIon

to soldEr Pad (°c/W)

Part numBEr

coEFFIcIEnt oF ForWard

VoltaGE ^[2](ꢁV/°c)

mInImum

tyPIcal

maXImum

L150-xxxx502400000

L150-xxxx500600000

23.5

5.8

24.5

6.1

26.5

6.6

-12

-3

2

Notes for Table 3:

1. Lumileds maintains a tolerance of ±1% on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4ꢀ Absolute maximum ratings for LUXEON 5050ꢀ

ParamEtEr

maXImum PErFormancE

240mA for 24V

800mA for 6V

DC Forward Current^{[1, 2]}

300mA for 24V

1000mA for 6V

Peak Pulsed Forward Current^{[1, 3]}

LED Junction Temperature^[1](DC & Pulse)

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)

Operating Case Temperature^[1]

125°C

Class 2

105°C

-40°C to 105°C

LED Storage Temperature

Reverse Voltage (V_reverse

)

LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. At 10% duty cycle with pulse width of 10ms.

4

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1a. Typical normalized power vs. wavelength for L150-xx7050xx00000 at test current, T_j=25°Cꢀ

Figure 1b. Typical normalized power vs. wavelength for L150-xx8050xx00000 at test current, T_j=25°Cꢀ

5

Figure 1c. Typical normalized power vs. wavelength for L150-xx9050xx00000 at test current, T_j=25°Cꢀ

Light Output Characteristics

Figure 2. Typical normalized light output vs. junction temperature for L150-xxxx50xx00000 at test current.

6

Figure 3a. Typical normalized light output vs. forward current for L150-xxxx502400000, T_j=25°Cꢀ

Figure 3b. Typical normalized light output vs. forward current for L150-xxxx500600000, T_j=25°Cꢀ

7

Forward Current Characteristics

Figure 4a. Typical forward current vs. forward voltage for L150-xxxx502400000, T_j=25°Cꢀ

Figure 4b. Typical forward current vs. forward voltage for L150-xxxx500600000, T_j=25°Cꢀ

8

Radiation Pattern Characteristics

Figure 5. Typical radiation pattern for L150-xxxx50xx00000 at test current, T_j=25°Cꢀ

Figure 6. Typical polar radiation pattern for L150-xxxx50xx00000 at test current, T_j=25°Cꢀ

9

Product Bin and Labeling Deﬁnitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ﬂux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON 5050 LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C C

Where:

A

–

designates luminous ﬂux bin (example: H=450 to 500 lumens, L=600 to 650 lumens)

designates color bin (example: (example: 3=3 SDCM, 5=5 SDCM parts)

designates forward voltage bin (example: A1, A2, B1, B2)

B

C C

Therefore, a LUXEON 5050 with a lumen range of 600 to 650, color bin of 3 and forward voltage range of 23.5 to 24.2V has the

following CAT code:

L 3 A 1

Luminous Flux Bins

Table 5 lists the standard luminous ﬂux bins for LUXEON 5050 LEDs. Although several bins are outlined, product availability in a

particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ﬂux bin deﬁnitions for LUXEON 5050, T_j=25°Cꢀ

lumInous FluX ^[1](ꢀꢁ)

BIn

mInImum

400

maXImum

450

G

H

J

450

500

550

K

L

550

600

650

M

650

700

N

700

750

Notes for Table 5:

1. Lumileds maintains a tolerance of ±7% on luminous ﬂux measurements.

10

Color Bin Deﬁnitions

Figure 7. 3- and 5-step MacAdam ellipse illustration for hot-color targeting expected at 85°C.

Table 6. 3- and 5-step MacAdam ellipse color bin deﬁnitions for LUXEON 5050 at test current, hot-color targeted at T_j=85°Cꢀ

cEntEr PoInt ^[1]

(ꢂx, ꢂꢃ)

maJor aXIs,

ꢄ

mInor aXIs,

b

EllIPsE rotatIon

nomInal cct

color sPacE

anGlE, θ

2700K

3000K

3500K

4000K

5000K

5700K

6500K

2700K

3000K

3500K

4000K

5000K

5700K

Single 3-step MacAdam ellipse

Single 5-step MacAdam ellipse

(0.4578, 0.4101)

(0.4338, 0.4030)

(0.4073, 0.3917)

(0.3818, 0.3797)

(0.3447, 0.3558)

(0.3287, 0.3417)

(0.3123, 0.3282)

(0.4578, 0.4101)

(0.4338, 0.4030)

(0.4073, 0.3917)

(0.3818, 0.3797)

(0.3447, 0.3558)

(0.3287, 0.3417)

(0.3123, 0.3282)

0.00810

0.00834

0.00927

0.00939

0.00822

0.00745

0.00669

0.01350

0.01390

0.01545

0.01565

0.01370

0.01243

0.01115

0.00420

0.00408

0.00414

0.00402

0.00354

0.00320

0.00285

0.00700

0.00680

0.00690

0.00670

0.00590

0.00533

0.00475

53.70°

53.22°

54.00°

53.72°

59.62°

59.09°

58.57°

53.70°

53.22°

54.00°

53.72°

59.62°

59.09°

58.57°

6500K

Notes for Table 6:

1. Lumileds maintains a tolerance of ±0.01 on x and y coordinates in the CIE 1931 color space.

11

Forward Voltage Bins

Table 7. Forward voltage bin deﬁnitions for LUXEON 5050, T_j=25°Cꢀ

ForWard VoltaGE ^[1](V_f)

Part numBEr

BIn

mInImum

23.5

24.2

25.0

25.8

5.8

maXImum

24.2

25.0

25.8

26.5

6.0

A1

A2

B1

B2

A1

A2

B1

B2

L150-xxxx502400000

6.0

6.2

L150-xxxx500600000

6.2

6.4

6.6

Notes for Table 7:

1. Lumileds maintains a tolerance of ±1% on forward voltage measurements.

Mechanical Dimensions

Figure 8ꢀ Mechanical dimensions for LUXEON 5050ꢀ

Notes for Figure 8:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

12

Reﬂow Soldering Guidelines

t_p

T_p

Critical Zone

_Lto T_p

Ramp-up

T

T_L

t_L

T_smax

T_smin

Ramp-down

t_s

Preheat Area

25

Time 25ºC to Peak

JEDEC J-STD-020D

Time

Figure 9. Visualization of the acceptable reﬂow temperature proﬁle as speciﬁed in Table 8.

Table 8. Reﬂow proﬁle characteristics for LUXEON 5050.

ProFIlE FEaturE

Preheat Minimum Temperature (T_smin

Preheat Maximum Temperature (T_smax

lEad-FrEE assEmBly

)

150°C

200°C

)

Preheat Time (t_sminto t_smax

)

60 to 180 seconds

3°C / second maximum

217°C

Ramp-Up Rate (T_Lto T_p)

Liquidus Temperature (T_L)

Time Maintained Above Temperature T_L(t_L)

Peak / Classiﬁcation Temperature (T_p)

Time Within 5°C of Actual Temperature (t_p)

Ramp-Down Rate (T_pto T_L)

60 to 150 seconds

260°C

20 to 40 seconds

6°C / second maximum

8 minutes maximum

Time 25°C to Peak Temperature

JEDEC Moisture Sensitivity

Table 9. Moisture sensitivity levels for LUXEON 5050.

Floor lIFE

soak rEquIrEmEnts standard

lEVEl

tImE

condItIons

tImE

condItIons

3

168 Hours

≤30°C / 60% RH

192 Hours +5 / -0

30°C / 60% RH

13

Solder Pad Design

Figure 10ꢀ Recommended PCB solder pad layout for LUXEON 5050ꢀ

Notes for Figure 10:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Packaging Information

Pocket Tape Dimensions

Figure 11ꢀ Pocket tape dimensions for LUXEON 5050ꢀ

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

14

Reel Dimensions

Front

Back

10

3

Front View

Back View

Figure 12ꢀ Reel dimensions for LUXEON 5050ꢀ

Notes for Figure 12:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

15

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry ﬁrsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver diﬀerentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world safer, better and more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

Neither Lumileds Holding B.V. nor its aﬃliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aﬃliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aﬃliates

warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding

B.V. and its aﬃliates reserve the right to make changes without notice. You as user agree to this disclaimer and

user agreement with the download or use of the provided materials, information and data. A listing of Lumileds

product/patent coverage may be accessed at lumileds.com/patents.

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

DS174 LUXEON 5050

Product Datasheet 20180207


型号：	L150-3070500600000
厂家：	LUMILEDS LIGHTING COMPANY
描述：	High efficacy and lumens in a multi-die, high power package, enabling low system costs
文件：	总17页 (文件大小：1841K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

L150-3070500600000 [LUMILEDS]

相关型号：

L150-30705006000S0

L150-3070502400000

L150-30705030000S0

L150-3080500600000

L150-30805006000S0

L150-3080502400000

L150-3090500600000

L150-3090502400000

L150-3580500600000

L150-35805006000S0

L150-3580502400000

L150-3590500600000