LFXH-C2B-0220 [LUMILEDS]
Industry-leading solutions for light guide DRL, and signature lamps;
| 型号： | LFXH-C2B-0220 |
| 厂家： | 
LUMILEDS LIGHTING COMPANY |
| 描述： | Industry-leading solutions for light guide DRL, and signature lamps |
| 文件： | 总16页 (文件大小：1625K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AUTOMOTIVE
lUXEOn F Es
cooꢀ White
Industry-leading solutions for light guide
DRL, and signature lamps
LUXEON F ES Cool White LEDs are the only automotive LEDs that deliver
design flexibility and advanced functionality. These products, with their
miniaturized form factor, are designed to support daytime running lights,
front fog and low and high beam applications. The Lumileds automotive
binning structure meets both SAE and ECE color specifications and
is hot binned at 85°C, consistent with actual automotive operational
environments. LUXEON F ES Cool White provides an industry-leading
solution for your front automotive lights applications. All LUXEON F LEDs
are IEC-60810 qualified.
FEATUrEs And BEnEFITs
PrIMAry APPlIcATIOns
Higher drive current capability for increased flux performance
Low thermal resistance for better hot lumen performance
Standard packaging for low cost and ease of manufacturability
Hot binned at 85°C monopulse (MP) to match closer to operating conditions
IEC/PAS 62707-1 White LED
Daytime Running Lights
Front Fog
Headlight
RoHS
COMPLIANT
DS187 LUXEON F ES Cool White Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Product Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2
Product Test Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3
Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Absolute Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Forward Current and Voltage Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Color Shift Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating Limits Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Permissible Pulse Handling Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Product Bin and Labeling Definitions ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 10
Designing with LUXEON F ES Cool White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Decoding Product Bin Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Color Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Mechanical Dimensionsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 13
Packaging Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 14
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DS187 LUXEON F ES Co
General Product Information
Product Test Conditions
LUXEON F ES Cool White LEDs are tested and binned using a 20ms monopulse (MP) at 700mA drive current, case temperature,
Tc, of 85°C.
Tj = LED junction temperature
Tc = Tsolder = Case Temperature
Tsensor = Temperature at thermo sensor location (not solder location)
Figure 1ꢀ Example of case temperature location on sample board for LUXEON F ES Cool Whiteꢀ
Part Number Nomenclature
Part numbers for LUXEON F ES Cool White follow the convention below:
L F X H – A B C – E F G H
Where:
L
–
–
–
–
–
–
–
–
designates LUXEON
F
designates LUXEON F product family
designates hot binning
X H
A
designates color variant (C=White)
designates die size (2=2mm2)
designates binning current (B=700mA)
designates future product offerings
designates minimum luminous flux
B
C
E
F G H
Therefore, the following part number is used for a LUXEON F ES Cool White with a minimum luminous flux of 220 lumens:
L F X H – C 2 B – 0 2 2 0
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON F ES
Cool White is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1ꢀ Product selection for LUXEON F ES Cool White at 20ms MP test current, Tc=85°Cꢀ
MInIMUM lUMInOUs FlUX [1] (ꢀm)
TEsT cUrrEnT (mA)
PArT nUMBEr
220
240
260
700
700
700
LFXH-C2B-0220
LFXH-C2B-0240
LFXH-C2B-0260
Notes for Table 1:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
Optical Characteristics
Table 2ꢀ Typical optical characteristics for LUXEON F ES Cool White at 20ms MP test current, Tc=85°Cꢀ
cOrrElATEd cOlOr TEMPErATUrE
TOTAl InclUdEd AnglE [1]
VIEWIng AnglE [2]
PArT nUMBEr
θ0.90V
2θ1/2
MInIMUM
MAXIMUM
LFXH-C2B-0xxx
5500K
6680K
140°
120°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
Electrical and Thermal Characteristics
Table 3ꢀ Electrical characteristics for LUXEON F ES Cool White at 20ms MP test current, Tc=85°Cꢀ
TyPIcAl TꢁErMAl rEsIsTAncE—
JUncTIOn TO cAsE (°c/W)
TEMPErATUrE
cOEFFIcIEnT OF
FOrWArd
FOrWArd
dynAMIc
rEsIsTAncE [2]
(Ω) Rd
VOlTAgE [1] (Vf)
rθj-ꢂ eꢀ [4]
rθj-ꢂ ꢃeaꢀ [5]
PArT nUMBEr
VOlTAgE [3]
(mV/°C) ΔVf / ΔTj
MInIMUM
2.55
MAXIMUM
TyPIcAl
2.4
MAXIMUM
TyPIcAl
3.4
MAXIMUM
LFXH-C2B-0xxx
3.27
0.3
-2.1
2.7
3.8
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs (see Figure 4a. Typical forward current vs. forward voltage).
3. Measured between Tc=80°C and T =90°C at binning current.
4. Rθ el: Electrical thermal resistancce (junction to case).
5. Rθjj--cc real: Real thermal resistance (junction to case) with wall plug efficiency included. Reference JESD51-51, JESD51-14, 4.1.3.
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
3
Absolute Ratings
Table 4ꢀ Absolute ratings for LUXEON F ES Cool Whiteꢀ
PArAMETEr
PErFOrMAncE
Minimum DC Forward Current
Maximum DC Forward Current
50mA
1000mA
Maximum Junction Temperature[1]
Operating Case Temperature at Test Current[1]
Operating Case Temperature at Maximum Current[1]
LED Storage Temperature
150°C
-40°C to 120°C
-40°C to 120°C
-40°C to 130°C
Maximum Soldering Temperature
Allowable Reflow Cycles
260°C
3
ESD Sensitivity[2]
±8kV HBM, ±400V MM, ±2kV CDM
Reverse Voltage (Vreverse
)
LUXEON F LEDs are not designed to be driven in reverse bias
121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum
Autoclave Conditions
Notes for Table 4:
1. Proper current derating must be observed to maintain junction temperature below the maximum. LUXEON F LEDs driven at or above maximum LED case temperature may have a
shorter lifetime.
2. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101).
JEDEC Moisture Sensitivity
Table 5ꢀ Moisture sensitivity levels for LUXEON F ES Cool Whiteꢀ
FlOOr lIFE
sTAndArd sOAk rEqUIrEMEnT
lEVEl
TIME
cOndITIOns
TIME
cOndITIOns
85°C / 85% RH
1
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 2ꢀ Typical normalized power vsꢀ wavelength for LUXEON F ES Cool White at 20ms MP, 700mA, Tc=85ºCꢀ
Light Output Characteristics
Figure 3aꢀ Typical normalized light output vsꢀ case temperature for LUXEON F ES Cool White at 20ms MP, 700mAꢀ
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
5
Figure 3bꢀ Typical normalized light output vsꢀ forward current for LUXEON F ES Cool White at TC=85°Cꢀ
Forward Current and Voltage Characteristics
Figure 4aꢀ Typical forward current vsꢀ forward voltage for LUXEON F ES Cool White at TC=85°Cꢀ
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
6
Figure 4bꢀ Typical forward voltage shift vsꢀ case temperature for LUXEON F ES Cool Whiteꢀ
Color Shift Characteristics
Figure 5aꢀ Typical color shift in CIE 1931 x and y coordinates for LUXEON F ES Cool White at 20ms MP, 700mAꢀ
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
7
Figure 5bꢀ Typical color shift in CIE 1931 x and y coordinates over angle for LUXEON F ES Cool White at 20ms MP, 700mAꢀ
Radiation Pattern Characteristics
Figure 6ꢀ Typical radiation pattern for LUXEON F ES Cool White at 20ms MP, 700mA, TC=85°Cꢀ
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
8
Operating Limits Characteristics
Figure 7ꢀ Maximum forward current vsꢀ case temperature for LUXEON F ES Cool Whiteꢀ
Permissible Pulse Handling Characteristics
Figure 8ꢀ Permissible pulse handling capability for LUXEON F ES Cool White, Tc=120°Cꢀ
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
9
Product Bin and Labeling Definitions
Designing with LUXEON F ES Cool White
Flux bins supportable for car programs depend on product color, program start and end of production date. Flux roadmaps by
year and product color are maintained and available from the sales representative. Please contact your local sales representative
to request the flux bin range with best supportability for program timing.
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage.
LUXEON F ES Cool White LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:
A B C D
Where:
A
–
–
–
designates luminous flux bin (example: T=220 to 240 lumens)
designates color bin (example: 1A, 1B, 1C, 1D)
B C
D
designates forward voltage bin (example: B=2.55V to 2.79V)
Therefore, a LUXEON F ES Cool White with a lumen range of 220 to 240, color bin of 1D, and a forward voltage range of 2.55V to
2.79V has the following CAT code:
T 1 D B
Luminous Flux Bins
Table 6 lists the standard luminous flux bins for LUXEON F emitters. Although several bins are outlined, product availability in a
particular bin varies by production run and by product performance. Not all bins are available in all colors.
Table 6. Luminous flux bin definitions for LUXEON F ES Cool White at 20ms MP test current, Tc=85°Cꢀ
lUMInOUs FlUX [1] (ꢀm)
BIn
MInIMUM
220
MAXIMUM
240
T
V
240
260
W
260
280
Notes for Table 6:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
10
Color Codes
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.3
0.3
0.31
0.32
0.33
0.34
0.35
0.36
x
Figure 9ꢀ Color bin structure in CIE 1931 color space for LUXEON F ES Cool Whiteꢀ
Notes for Figure 9:
1. Lumileds supports the following bins for LUXEON F ES Cool White: H2 and HC.
2. LUXEON F historical large color notations. Color bins must be ordered by fine bin designators, shown below.
H1 = 1A, 1B, 1C, 1D
H2 = 2A, 2B, 2C, 2D
H3 = 3A, 3B, 3C, 3D
H4 = 4A, 4B, 4C, 4D
HC = 1D, 2C, 3B, 4A
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
11
Color Bin Definitions
Table 7. Color bin definitions for LUXEON F ES Cool White.
6-dIgIT
IEc cOdE
TyPIcAl
ccT
6-dIgIT
IEc cOdE
TyPIcAl
ccT
BIn
x
ꢄ
BIn
x
ꢄ
0.3120
0.3185
0.3192
0.3131
0.3185
0.3253
0.3256
0.3192
0.3253
0.3323
0.3323
0.3256
0.3323
0.3396
0.3392
0.3323
0.3109
0.3177
0.3185
0.3120
0.3177
0.3249
0.3253
0.3185
0.3249
0.3324
0.3323
0.3253
0.3324
0.3401
0.3396
0.3323
0.3139
0.3203
0.3131
0.3070
0.3203
0.3266
0.3191
0.3131
0.3266
0.3329
0.3251
0.3191
0.3329
0.3392
0.3310
0.3251
0.3211
0.3277
0.3203
0.3139
0.3277
0.3344
0.3266
0.3203
0.3344
0.3410
0.3329
0.3266
0.3410
0.3476
0.3392
0.3329
0.3120
0.3169
0.3177
0.3131
0.3169
0.3246
0.3249
0.3177
0.3246
0.3325
0.3324
0.3249
0.3325
0.3406
0.3401
0.3324
0.3109
0.3161
0.3169
0.3120
0.3161
0.3242
0.3246
0.3169
0.3242
0.3325
0.3325
0.3246
0.3325
0.3412
0.3406
0.3325
0.3306
0.3353
0.3277
0.3232
0.3353
0.3424
0.3344
0.3277
0.3424
0.3493
0.3410
0.3344
0.3493
0.3562
0.3476
0.3410
0.3382
0.3432
0.3353
0.3306
0.3432
0.3506
0.3424
0.3353
0.3506
0.3579
0.3493
0.3424
0.3579
0.3652
0.3562
0.3493
2B
ebvG33
ebyG33
ecbG33
eceG33
ebvD33
ebyD33
ecbD33
eceD33
6460K
1B
fbwA23
fbyA33
fcbA33
fceA33
fbwD23
fbyD33
fcbD33
fceD33
6390K
6050K
5680K
5350K
6390K
6050K
5680K
5350K
2D
4B
4D
2A
2C
4A
6050K
5680K
5350K
6460K
6050K
5680K
5350K
1D
3B
3D
1A
1C
3A
3C
4C
Notes for Table 7:
1. Lumileds maintains a tester tolerance of ± 0.005 on x and y color coordinates.
2. CIE 1931 x and y coordinate frame.
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
12
Forward Voltage Bins
Table 8. Forward voltage bin definitions for LUXEON F ES Cool White.
FOrWArd VOlTAgE [1] (Vf)
BIn
MInIMUM
MAXIMUM
2.79
B
C
D
2.55
2.79
3.03
3.03
3.27
Notes for Table 8:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Although several bins are outlined, product availability in a particular bin varies by production run and product performance.
Mechanical Dimensions
1.65
0±0.05 CENTER OF
THERMAL PAD
TO CENTER OF
DIE AREA
B
ANGULARITY
TOLERANCE
±2°
1.90±0.10
0.95
CENTER OF
THERMAL PAD
0.125
TYP.
1.4
0.60±0.10
0.575±0.10
CENTER OF THERMAL
PAD TO TOP EDGE
0.85
0.90
1.4
2.05
0.275±0.05
CENTER OF THERMAL PAD
TO CENTER OF DIE AREA
2.30±0.10
0.90
DIE AREA
CENTER OF DIE
CATHODE
B
ANODE
0.68±0.10
0.70
0.25
TVS
0.95±0.10
CENTER OF THERMAL PAD
TO SIDE EDGE
STANDARD TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
LINEAR:
ANGULAR:
Figure 10ꢀ Mechanical dimensions for LUXEON F ES Cool Whiteꢀ
Notes for Figure 10:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
13
Packaging Information
Pocket Tape Dimensions
B
A
A
B
Ao:
Bo:
Ko:
K1:
2.15±0.05
2.55±0.05
0.95±0.05
-
Pitch:
4.00±0.10
+0.30
8.00
Width:
-0.10
Figure 11ꢀ Pocket Tape dimensions for LUXEON F ES Cool Whiteꢀ
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Ao is the width of pocket and Ko is the depth of pocket. Bo is the height of pocket.
Reel Dimensions
Figure 12ꢀ Reel dimensions for LUXEON F ES Cool Whiteꢀ
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved.
14
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
©2017 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS187 LUXEON F ES Cool White
Product Datasheet 20171108
相关型号：
©2020 ICPDF网 联系我们和版权申明