LXZ2-2280-5 [LUMILEDS]
Single Color LED, Warm White, ROHS COMPLIANT PACKAGE-3;
| 型号： | LXZ2-2280-5 |
| 厂家： | 
LUMILEDS LIGHTING COMPANY |
| 描述： | Single Color LED, Warm White, ROHS COMPLIANT PACKAGE-3 光电 |
| 文件： | 总23页 (文件大小：2511K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IllumInatIon
luXEon Z ES
Extreme flux density in a micro footprint
package for precise optical control
LUXEON Z ES is a high power 1.6mm x 2.0mm LED that enables never
before seen color consistency, luminance, flux density and design
flexibility for lighting solutions. LUXEON Z ES is undomed, a feature that
provides unmatched optical flexibility for precise beam angle control.
Tested and binned at application conditions, 85°C, LUXEON Z ES emitters
are an ideal choice for indoor and outdoor light sources requiring
superior beam angles, higher efficacy and lower costs.
FEaturES and BEnEFItS
PrImary aPPlIcatIonS
Micro footprint enables close packaging
Undomed design allows precise optical control
Architectural
Downlights
Lamps
3- and 5-step MacAdam ellipse: Freedom from Binning enabling
color consistency
LM-80 test report available
Outdoor
Spotlights
RoHS
COMPLIANT
No. E352519
DS134 LUXEON Z ES Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Product Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2
Product Test Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3
Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 5
Characteristic Curves ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 6
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Product Bin and Labeling Definitions ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 14
Decoding Product Bin Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Color Bin Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Peak Wavelength Bins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Mechanical Dimensionsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 18
Soldering Reflow Guidelines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 19
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Packaging Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 21
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DS134 LUXEON Z ES Produc
General Product Information
Product Test Conditions
LUXEON Z ES are tested and binned with a drive current of 700mA for 3V part or 40mA for 48V part at a junction temperature,
Tj, of 85°C.
Part Number Nomenclature
Part numbers for LUXEON Z ES follow the convention below:
L X Z A – B C D E – F
Where:
A
–
–
–
–
designates voltage (2=3V and H=48V)
B C
D E
F
designates nominal ANSI CCT or color (eg. 27=2700K, 30=3000K and PR=Royal Blue)
designates minimum CRI performance (70=70CRI, 80=80CRI, 90=90CRI, 02=Royal Blue)
designates white color space definition (3=3 SDCM and 5=5 SDCM, not used for Royal Blue)
Therefore, the following part number is used for a LUXEON Z ES White 3V, 3000K 80CRI LED, which is binned within a 3-step
MacAdam ellipse:
L X Z 2 – 3 0 8 0 – 3
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z ES is
compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1aꢀ Product performance of LUXEON Z ES 3V at 700mA and 350mA, Tj=85ºCꢀ
lumInouS FluX [1] (ꢀꢁ)
tyPIcal
lumInouS
tyPIcal
lumInouS
FluX (ꢀꢁ)
tyPIcal
lumInouS
nomInal
cct
mInImum
crI [1]
Part numBEr [2]
EFFIcacy (ꢀꢁ/W)
EFFIcacy (ꢀꢁ/W)
mInImum
tyPIcal
700ꢁa
240
350ꢁa
4000K
5000K
5700K
6500K
2200K
2700K
3000K
3500K
4000K
5000K
2700K
3000K
3500K
4000K
5700K
70
70
70
70
80
80
80
80
80
80
90
90
90
90
90
220
220
220
220
140
170
180
190
190
190
140
150
150
150
170
122
125
125
125
77
132
135
135
135
83
139
142
142
142
87
LXZ2-4070
LXZ2-5070
245
245
LXZ2-5770
245
LXZ2-6570
150
LXZ2-2280-x
LXZ2-2780-x
LXZ2-3080-x
LXZ2-3580-x
LXZ2-4080-x
LXZ2-5080-x
LXZ2-2790-x
LXZ2-3090-x
LXZ2-3590-x
LXZ2-4090-x
LXZ2-5790-x
185
94
102
107
113
121
121
88
107
113
118
127
127
92
195
99
205
105
112
112
82
220
220
160
170
87
94
98
171
87
94
98
180
92
99
104
110
190
97
105
Table 1bꢀ Product performance of LUXEON Z ES 48V at 40mA and 20mA, Tj=85ºCꢀ
lumInouS FluX [1] (ꢀꢁ)
tyPIcal
lumInouS
tyPIcal
lumInouS
FluX (ꢀꢁ)
tyPIcal
lumInouS
nomInal
cct
mInImum
crI [1]
Part numBEr [2]
EFFIcacy (ꢀꢁ/W)
EFFIcacy (ꢀꢁ/W)
mInImum
tyPIcal
40ꢁa
165
20ꢁa
2700K
80
150
83
91
93
LXZH-2780-x
Table 1cꢀ Product performance of LUXEON Z ES Royal Blue at 700mA, Tj=85ºCꢀ
radIomEtrIc PoWEr [1] (ꢁW)
tyPIcal radIant
EFFIcIEncy (%)
color
Part numBEr
mInImum
tyPIcal
Royal Blue
800
850
45%
LXZ2-PR02
Notes for Tables 1a, 1b and 1c:
1. Lumileds maintains a tolerance of ±6.5% on both luminous flux and radiometric power and ±2 on CRI measurements.
2. In the part number the -x is the designation for the white color space requirement. On 80CRI and 90CRI versions 3 designates 3 SDCM and 5 designates 5 SDCM. For 70 CRI parts or lower,
they will not have an SDCM designation and all parts are binned within a 5-step SDCM.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Table 2ꢀ Optical characteristics for LUXEON Z ES at 700mAꢀ
Part numBEr
tyPIcal total IncludEd anglE [1]
tyPIcal VIEWIng anglE [2]
LXZ2-xxxx
LXZ2-xxxx-x
LXZH-xxxx-x
LXZ2-PR02
140°
140°
140°
140°
116°
116°
116°
120°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
Electrical and Thermal Characteristics
Table 3aꢀ Electrical and thermal characteristics for LUXEON Z ES at 700mAꢀ
ForWard VoltagE [1] (VF)
Part numBEr
tyPIcal tEmPEraturE
tyPIcal tHErmal
rESIStancE—JunctIon
to SoldEr Pad (°c/W)
coEFFIcIEnt oF ForWard
VoltagE [1] (ꢁV/°c)
mInImum
tyPIcal
maXImum
LXZ2-xxxx
2.5
2.5
2.8
2.8
3.25
3.25
-1.6
-1.6
3
3
LXZ2-xxxx-x
Notes for Table 3a:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 110°C.
Table 3b. Forward voltage and typical thermal resistance for LUXEON Z ES at 40mA.
ForWard VoltagE [1] (VF)
tyPIcal tEmPEraturE
coEFFIcIEnt oF ForWard
VoltagE [1] (ꢁV/°c)
tyPIcal tHErmal
rESIStancE—JunctIon
to SoldEr Pad (°c/W)
Part numBEr
mInImum
48.5
tyPIcal
maXImum
50.5
LXZH-xxxx-x
49.0
-30
3
Notes for Table 3b:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 110°C.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
4
Absolute Maximum Ratings
Table 4ꢀ Absolute maximum ratings for LUXEON Z ESꢀ
ParamEtEr
maXImum PErFormancE
45mA for LXZH-xxxx-x
1200mA for LXZ2-xxxx
DC Forward Current[1, 2]
65mA for LXZH-xxxx-x
1350mA for LXZ2-xxxx
Peak Pulsed Forward Current[1, 3]
LED Junction Temperature[1] (DC & Pulse)
ESD Sensitivity
135°C for LXZx-xxxx
Class 3B
Operating Case Temperature
LED Storage Temperature
Soldering Temperature
-40°C to 135°C
-40°C to 135°C
JEDEC 020c 260°C
Allowable Reflow Cycles
3
[4, 5]
Reverse Voltage (Vreverse
)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. Pulsed operation with the maximum peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse
voltage does not exceed 5V and the reverse current is less than 200uA.
5. A maximum 5V reverse voltage for up to 10s is an acceptable beginning of life, one time, test.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
5
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1. Typical normalized power vs. wavelength for LXZx-xxxx at test current, Tj=85ºCꢀ
Figure 2. Typical normalized power vs. wavelength for LXZ2-PR02 at 700mA, Tj=85ºCꢀ
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
6
Light Output Characteristics
Figure 3a. Typical normalized light output vs. junction temperature for LXZx-xxxx, at test currentꢀ
Figure 3b. Typical normalized light output vs. forward current for LXZH-xxxx-x, Tj=85ºCꢀ
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
7
Figure 4a. Typical normalized light output vs. junction temperature for LXZ2-PR02, at test currentꢀ
Figure 4b. Typical normalized light output vs. forward current for LXZx-xxxx, Tj=85ºCꢀ
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
8
Figure 4c. Normalized radiometric power vs. forward current for LXZ2-PR02, Tj=85ºCꢀ
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
9
Forward Current Characteristics
Figure 5a. Typical forward current vs. forward voltage for LXZx-xxxx, Tj=85ºCꢀ
Figure 5b. Typical forward current vs. forward voltage for LXZH-2780-x, Tj=85ºCꢀ
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
10
Figure 5c. Typical forward current vs. forward voltage for LXZ2-PR02, Tj=85ºCꢀ
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
11
Radiation Pattern Characteristics
Figure 6a. Typical radiation pattern for LXZx-xxxx (white only) at test currentꢀ
Figure 6b. Typical radiation pattern for LXZ2-PR02 at test current.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
12
Figure 7a. Typical polar radiation pattern for LXZx-xxxx (white only) at test currentꢀ
Figure 7b. Typical polar radiation pattern for LXZ2-PR02 at test current.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
13
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON Z ES White LEDs are labeled using a 4-digit alphanumeric CAT code following the format below.
A B C D
A
–
–
–
designates luminous flux/radiometric power bin (example: L=200 to 210 lumens, M=210 to 220 lumens)
designates white color bins (example: 5A, 5B, 5C, 5D, 3U, 3L for 3000K parts)
B C
D
designates forward voltage bin (example: X =2.65 to 2.85V, Y=2.85 to 3.00V)
Therefore, a LUXEON Z ES white LED with a lumen range of 200 to 210, color bin of 5D and a forward voltage range of 2.65 to
2.85V has the following CAT code:
L 5 D X
LUXEON Z ES Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the format below.
A B C
A
B
C
–
–
–
designates luminous flux/radiometric power bin (example: L=200 to 210 lumens, M=210 to 220 lumens)
designates Royal Blue peak wavelength bins (example: 3 for peak wavelength of 440nm to 445nm)
designates forward voltage bin (example: P=2.5 to 2.75V, R=2.75 to 3.00V)
Therefore, a LUXEON Z ES Royal Blue with a radiometric power of 1000mW to 1050mW, peak wavelength bin of 3 and a forward
voltage range of 2.5 to 2.75V has the following CAT code:
Q 3 P
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
14
Luminous Flux Bins
Table 5 lists the standard photometric luminous flux bins for LUXEON Z ES emitters. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON Z ES.
lumInouS FluX [1] (ꢀꢁ)
BIn
mInImum
maXImum
D
130
140
E
F
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
G
H
J
K
L
M
N
P
Q
R
S
T
U
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
Radiometric Power Bins
Table 6. Radiometric power bin definitions for LXZ2-PR02.
radIomEtrIc PoWEr [1] (ꢁW)
BIn codE
mInImum
maXImum
850
L
M
N
P
800
850
900
900
950
950
1000
1050
1100
1150
Q
R
1000
1050
1100
S
Notes for Table 6:
1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
15
Color Bin Definitions
Figure 8. Color space definition for LUXEON Z ES.
Figure 9. 3- and 5-step MacAdam ellipse illustration for Table 7.
Table 7. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON Z ES.
cEntEr PoInt [2]
maJor aXIS,
ꢄ
mInor aXIS,
b
nomInal cct
color SPacE [1]
EllIPSE rotatIon
(ꢂx, ꢂꢃ)
2200K
2700K
3000K
3500K
4000K
5000K
2200K
2700K
3000K
3500K
4000K
5000K
5700K
Single 3-step MacAdam ellipse
Single 3-step MacAdam ellipse
Single 3-step MacAdam ellipse
Single 3-step MacAdam ellipse
Single 3-step MacAdam ellipse
Single 3-step MacAdam ellipse
Single 5-step MacAdam ellipse
Single 5-step MacAdam ellipse
Single 5-step MacAdam ellipse
Single 5-step MacAdam ellipse
Single 5-step MacAdam ellipse
Single 5-step MacAdam ellipse
Single 5-step MacAdam ellipse
Single 5-step MacAdam ellipse
(0.5020, 0.4156)
(0.4578, 0.4101)
(0.4338, 0.4030)
(0.4073, 0.3917)
(0.3818, 0.3797)
(0.3447, 0.3553)
(0.5020, 0.4156)
(0.4578, 0.4101)
(0.4338, 0.4030)
(0.4073, 0.3917)
(0.3818, 0.3797)
(0.3447, 0.3553)
(0.3287, 0.3417)
(0.3123, 0.3282)
0.00863
0.00810
0.00834
0.00927
0.00939
0.00822
0.01438
0.01350
0.01390
0.01545
0.01565
0.01370
0.01243
0.01115
0.00398
0.00420
0.00408
0.00414
0.00402
0.00354
0.00663
0.00700
0.00680
0.00690
0.00670
0.00590
0.00533
0.00475
49.27°
53.70°
53.20°
54.0°
53.70°
59.60°
49.27°
53.70°
53.20°
54.00°
53.70°
59.60°
59.09°
58.57°
6500K
Notes for Table 7:
1. 3-step is available in 80CRI and 90CRI, and 5-step is available in 70CRI, 80CRI and 90CRI.
2. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates in the CIE color space.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
16
Table 8. MacAdam ellipse color bin definitions for LXZ2-xxxx and LXZH-xxx-x.
BIn
30
Sdcm
3-step MacAdam ellipse (80, 90CRI)
3-step MacAdam ellipse (80, 90CRI)
3-step MacAdam ellipse (80, 90CRI)
5-step MacAdam ellipse (70CRI)
3U
3L
50
5A
5B
5C
5D
5-step MacAdam ellipse (70, 80, 90CRI)
5-step MacAdam ellipse (70, 80, 90CRI)
5-step MacAdam ellipse (70, 80, 90CRI)
5-step MacAdam ellipse (70, 80, 90CRI)
Forward Voltage Bins
Table 9a. Forward voltage bin definitions for LXZ2-xxxx.
ForWard VoltagE [1] (VF)
BIn
mInImum
2.50
maXImum
P
R
S
X
Y
2.75
3.00
3.25
2.85
3.00
2.75
3.00
2.65
2.85
Notes for Table 9a:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
Table 9b. Forward voltage bin definitions for LXZH-xxxx-x.
ForWard VoltagE [1] (VF)
BIn
mInImum
maXImum
49.0
E
F
48.5
49.0
49.5
50.0
49.5
G
H
50.0
50.5
Notes for Table 9b:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
Peak Wavelength Bins
Table 10. Peak wavelength bins for LXZ2-PR02.
PEaK WaVElEngtH [1] (ꢅꢁ)
BIn
mInImum
440
maXImum
445
3
4
5
445
450
450
455
Notes for Table 10:
1. Lumileds maintains a tolerance of ±2nm on peak wavelength measurements.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
17
Mechanical Dimensions
Figure 10ꢀ Mechanical dimensions for LUXEON Z ESꢀ
Notes for Figure 10:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
18
Soldering Reflow Guidelines
tp
Tp
Critical Zone
L to Tp
Ramp-up
T
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 11. Temperature profile for Table 11.
Table 11. Reflow profile characteristics for LUXEON Z ES.
ProFIlE FEaturE
lEad FrEE aSSEmBly
Preheat Minimum Temperature (Tsmin
)
150°C
200°C
Preheat Maximum Temperature (Tsmax
)
Preheat Time (tsmin to tsmax
)
60 to 120 seconds
3°C / second maximum
217°C
Ramp-Up Rate (TL to Tp)
Liquidus Temperature (TL)
Time Maintained Above Temperature TL (tL)
Peak / Classification Temperature (Tp)
Time Within 5°C of Actual Temperature (tp)
Ramp-Down Rate (Tp to TL)
60 to 150 seconds
260°C
20 to 40 seconds
6°C / second maximum
8 minutes maximum
Time 25°C to Peak Temperature
JEDEC Moisture Sensitivity
Table 12ꢀ Moisture sensitivity levels for LUXEON Z ESꢀ
Floor lIFE
SoaK rEquIrEmEntS Standard
lEVEl
tImE
condItIonS
tImE
condItIonS
1
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
85°C / 85% RH
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
19
Solder Pad Design
Figure 12ꢀ Solder pad layout for LUXEON Z ESꢀ
Notes for Figure 12:
1. All dimensions are in millimeters.
2. The figure shows one of the LUXEON Z ES layouts for close-packing design on Printed Circuit Board (PCB). For more information on assembly and additional layouts, please refer to
LUXEON Z ES Application Brief (AB120).
3. The *.dwg files are available at lumileds.com.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
20
Packaging Information
Pocket Tape Dimensions
Figure 13ꢀ Tape dimensions for LUXEON Z ESꢀ
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Reel Dimensions
Figure 14ꢀ Reel dimensions for LUXEON Z ESꢀ
Notes for Figure 14:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS134 LUXEON Z ES Product Datasheet 20170223 ©2017 Lumileds Holding B.V. All rights reserved.
21
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct,
indirect or consequential, resulting from the use of the provided information and data. Although
Lumileds Holding B.V. has attempted to provide the most accurate information and data, the
materials and services information and data are provided “as is” and Lumileds Holding B.V.
neither warranties, nor guarantees the contents and correctness of the provided information
and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user
agree to this disclaimer and user agreement with the download or use of the provided materials,
information and data.
©2017 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS134 LUXEON Z ES
Product Datasheet 20170223
相关型号：
©2020 ICPDF网 联系我们和版权申明