LxF3-U410200012001 [LUMILEDS]
Unique LED enabling limitless design freedom;型号: | LxF3-U410200012001 |
厂家: | LUMILEDS LIGHTING COMPANY |
描述: | Unique LED enabling limitless design freedom |
文件: | 总21页 (文件大小:2035K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IllumInatIon
luXeon uV Fc liꢀꢁ
Unique LED enabling limitless
design freedom
With FlipChip platform technology, LUXEON UV FC Line contains both
1mm2 and 2mm2 die sizes and is the smallest and highest power density
(W/cm2) ultraviolet with FlipChip Technology in a Chip Scale Package
(CSP) LED that can be reflowed onto a substrate with standard surface
mount (SMT) equipment and process. LUXEON UV FC Line LEDs enable
tighter beam control and high packing density of LEDs on a chip on board
solution and completely eliminate wire bonds in the system. LUXEON UV
FC Line is the ideal choice for cost sensitive applications to achieve high
irradiance at high current density, maximizing W/$ by taking advantage of
lowest thermal resistance of a CSP device.
Features and BeneFIts
PrImary aPPlIcatIons
Ultraviolet wavelength range of 380nm to 420nm for a range of options
Specialty Lighting
– Analytical Instrumentation
– Curing
Micro sized CSP: 1.0mm2 and 2.0mm2 package for design flexibility
and packing density
No wire bonds allows for direct attach and reflow
5-sided emitter with batwing radiation pattern
Low thermal resistance for leading system level W/$
– Medical
– Security
Maximum drive current of 1A/mm2 delivers superior flux for reduced
LED count
RoHS
COMPLIANT
DS185 LUXEON UV FC Line Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Product Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2
Product Test Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3
Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 4
Characteristic Curves ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Wavelength Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Product Bin and Labeling Definitions ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 13
Decoding Product Bin Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Peak Wavelength Bins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Forward Voltage Bins ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 15
Mechanical Dimensionsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 16
Reflow Soldering Guidelines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 17
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Packaging Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 19
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DS185 LUXEON UV FC L
General Product Information
Product Test Conditions
LUXEON UV FC Line LEDs are tested and binned with a DC drive current of 500mA for LUXEON UV FC1 and 1000mA for LUXEON
UV FC2 at a junction temperature, Tj, of 25°C.
Part Number Nomenclature
Part numbers for LUXEON UV FC Line follow the convention below:
L A F 3 – U B B B C 0 0 0 D D D D 1
Where:
A
–
–
–
designates packing type (0=bin tape, 1=tape and reel)
B B B
C
designates minimum peak wavelength (380=380nm, 390=390nm, 400=400nm, 410=410nm)
designates product name and die size (1=LUXEON UV FC1 with 1mm2 die size, 2=LUXEON UV FC2 with
2mm2 die size)
D D D D –
designates minimum radiometric power (0300=300mW, 0350=350mW, 0400=400mW, 0450=450mW,
1400=1400mW, 1600=1600mW, etc.)
Therefore, the following part number is used for a LUXEON UV FC1, with a 1mm2 die, minimum peak wavelength of 390nm and a
minimum radiometric power of 400mW on tape and reel:
L 1 F 3 – U 3 9 0 1 0 0 0 0 4 0 0 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON UV FC Line
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1aꢀ Product performance of LUXEON UV FC1 at 500mA and 1000mA, Tj=25°Cꢀ
tyPIcal radIometrIc PoWer [2] (ꢂW)
PeaK
WaVelength [1]
(ꢀꢂ)
Part numBer
500ꢂa
650
750
650
750
550
650
750
350
450
530
1000ꢂa
1228
1417
1228
1417
1039
1228
1417
661
LxF3-U410100006001
LxF3-U410100007001
LxF3-U400100006001
LxF3-U400100007001
LxF3-U390100005001
LxF3-U390100006001
LxF3-U390100007001
LxF3-U380100003001
LxF3-U380100004001
LxF3-U380100005001
410–420
400–410
390–400
380–390
850
1001
Notes for Table 1a:
1. Lumileds maintains a tolerance of ±2nm for peak wavelength measurements.
2. Lumileds maintains a tolerance of ±10% for radiometric power measurements.
Table 1bꢀ Product performance of LUXEON UV FC2 at 1000mA and 2000mA, Tj=25°Cꢀ
tyPIcal radIometrIc PoWer [2] (ꢂW)
1000ꢂa 2000ꢂa
1300 2340
PeaK
WaVelength [1]
(ꢀꢂ)
Part numBer
LxF3-U410200012001
LxF3-U410200014001
LxF3-U400200010001
LxF3-U400200012001
LxF3-U400200014001
LxF3-U390200010001
LxF3-U390200012001
LxF3-U380200006001
LxF3-U380200008001
LxF3-U380200010001
410–420
400–410
390–400
380–390
1500
1100
1300
1450
1100
1300
700
2700
1980
2340
2610
1980
2340
1260
1620
1890
900
1050
Notes for Table 1b:
1. Lumileds maintains a tolerance of ±2nm for peak wavelength measurements.
2. Lumileds maintains a tolerance of ±10% for radiometric power measurements.
Optical Characteristics
Table 2ꢀ Optical characteristics for LUXEON UV FC1 at 500mA and LUXEON UV FC2 at 1000mA, Tj=25°Cꢀ
tyPIcal temPerature
coeFFIcIent oF PeaK
WaVelength (ꢀꢂ/°c)
tyPIcal sPectral
halF-WIdth (ꢀꢂ)
tyPIcal total
tyPIcal
Part numBer
Included angle [1]
VIeWIng angle [2]
LxF3-U410x000xxxx1
LxF3-U400x000xxxx1
LxF3-U390x000xxxx1
LxF3-U380x000xxxx1
13.7
12.0
11.0
9.0
0.05
0.05
0.05
0.05
170°
170°
170°
170°
140°
140°
140°
140°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
3
Electrical and Thermal Characteristics
Table 3aꢀ Electrical and thermal characteristics for LUXEON UV FC1 at 500mA, Tj=25°Cꢀ
ForWard Voltage [1] (Vf)
tyPIcal temPerature
coeFFIcIent oF ForWard
Voltage [2] (ꢂV/°c)
tyPIcal thermal
resIstance—JunctIon
to solder Pad (°c/W)
Part numBer
mInImum
tyPIcal
maXImum
LxF3-U41010000xxxx1
LxF3-U40010000xxxx1
LxF3-U39010000xxxx1
2.8
2.8
2.8
2.8
3.1
3.1
3.1
3.2
3.4
3.4
3.4
3.4
-2 to -3
2.0
LxF3-U38010000xxxx1
Notes for Table 3a:
1. Lumileds maintains a tolerance of ±0.05V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Table 3bꢀ Electrical and thermal characteristic for LUXEON UV FC2 at 1000mA, Tj=25°Cꢀ
ForWard Voltage [1] (Vf)
tyPIcal temPerature
coeFFIcIent oF ForWard
Voltage [2] (ꢂV/°c)
tyPIcal thermal
resIstance—JunctIon
to solder Pad (°c/W)
Part numBer
mInImum
tyPIcal
maXImum
L0F3-U4102000xxxx1
L0F3-U4002000xxxx1
L0F3-U3902000xxxx1
L0F3-U3802000xxxx1
2.8
2.8
2.8
2.8
3.1
3.1
3.1
3.2
3.4
3.4
3.4
3.6
-1 to -2
1.0
Notes for Table 3b:
1. Lumileds maintains a tolerance of ±0.05V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4ꢀ Absolute maximum ratings for LUXEON UV FC Lineꢀ
Parameter
maXImum PerFormance
1000mA for LUXEON UV FC1
2000mA for LUXEON UV FC2
DC Forward Current [1,2]
1300mA for LUXEON UV FC1
2600mA for LUXEON UV FC2
Peak Pulsed Forward Current[1,3]
LED Junction Temperature [1] (DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature [1]
LED Storage Temperature
120°C
Class 0B
-40°C to 120°C
-40°C to 135°C
Soldering Temperature
300 ±3°C[4]
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse
)
LUXEON UV FC Line LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current
3. At 10% duty cycle with pulse width of 10ms.
4. 300°C for AuSn (gold-tin) solder system, see AB116 for more details; 260°C for non-AuSn lead-free solder system per JEDEC J-STD-020E classification.
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1ꢀ Typical relative radiometric power vsꢀ wavelength for LUXEON UV FC1 at 500mA and LUXEON UV FC2 at 1000mA, Tj=25°Cꢀ
Light Output Characteristics
Figure 2aꢀ Typical normalized radiant power vsꢀ junction temperature for LUXEON UV FC1 at 500mAꢀ
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
5
Figure 2bꢀ Typical normalized radiant power vs, junction temperature for LUXEON UV FC2 at 1000mAꢀ
Figure 3aꢀ Typical normalized radiometric power vsꢀ forward current for LUXEON UV FC1 at Tj=25°Cꢀ
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
6
Figure 3bꢀ Typical normalized radiometric power vsꢀ forward current for LUXEON UV FC2 at Tj=25°Cꢀ
Forward Current Characteristics
Figure 4aꢀ Typical forward current vsꢀ forward voltage for LUXEON UV FC1 at Tj=25°Cꢀ
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
7
Figure 4bꢀ Typical forward current vsꢀ forward voltage for LUXEON UV FC2 at Tj=25°Cꢀ
Figure 5aꢀ Typical forward voltage shift vsꢀ junction temperature for LUXEON UV FC1 at Tj=25°Cꢀ
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
8
Figure 5bꢀ Typical forward voltage shift vsꢀ junction temperature for LUXEON UV FC2 at Tj=25°Cꢀ
Wavelength Shift
Figure 6aꢀ Typical peak wavelength shift vsꢀ forward current for LUXEON UV FC1 at Tj=25°Cꢀ
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
9
Figure 6bꢀ Typical peak wavelength shift vsꢀ forward current for LUXEON UV FC2 at Tj=25°Cꢀ
Figure 7aꢀ Typical peak wavelength vsꢀ junction temperature for LUXEON UV FC1 at 500mAꢀ
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
10
Figure 7bꢀ Typical peak wavelength vsꢀ junction temperature for LUXEON UV FC2 at 1000mAꢀ
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
11
Radiation Pattern Characteristics
Figure 8ꢀ Typical radiation pattern for LUXEON UV FC1 at 500mA and LUXEON UV FC2 at 1000mA, Tj=25ºCꢀ
Figure 9ꢀ Typical polar radiation pattern for LUXEON UV FC1 at 500mA and LUXEON UV FC2 at 1000mA, Tj=25ºCꢀ
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
12
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON UV FC1 LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:
A B c D
A
–
–
–
designates radiometric power bin (example: B=300 to 350mW, D=400 to 450mW, F=500 to 550mW)
designates peak wavelength bin (example: Ax=380 to 385nm, Cx=390 to 395nm, Ex=400 to 405nm)
designates forward voltage bin (example: 8=2.8 to 2.9V, 0=3.0 to 3.1V)
B c
D
Therefore, a LUXEON UV FC1 with a radiometric power range of 400 to 450mW, peak wavelength range of 400 to 405nm and a
forward voltage range of 3.0 to 3.1V has the following CAT code:
D E x 0
LUXEON UV FC2 LEDs are labeled using a 5-digit alphanumeric CAT code following the format below
A x B c D
A x
–
designates radiometric power bin (example: B1=600 to 800mW, D1=1000 to 1200mW, F1=1400mW
to 1600mW)
B c
D
–
–
designates peak wavelength bin (example: Ax=380 to 385nm, Cx=390 to 395nm, Ex=400 to 405nm)
designates forward voltage bin (example: 8=2.8 to 2.9V, 0=3.0 to 3.1V)
Therefore, a LUXEON UV FC2 with a radiometric power range of 1000 to 1200mW, peak wavelength range of 400 to 405nm and a
forward voltage range of 3.0 to 3.1V has the following CAT code:
D 1 E x 0
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
13
Radiometric Power Bins
Table 5 lists the standard radiometric power bins for LUXEON UV FC Line emitters. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Radiometric power bin definitions for LUXEON UV FC Line.
radIometrIc PoWer [1] (ꢂW)
BIn
mInImum
300
maXImum
350
B
C
350
400
D
400
450
E
450
500
F
500
550
G
550
600
H
600
650
I
650
700
J
700
750
K
750
800
L
800
850
M
A1
B1
C1
D1
E1
F1
G1
850
900
400
600
600
800
800
1000
1200
1400
1600
1800
1000
1200
1400
1600
Notes for Table 5:
1. Lumileds maintains a tolerance of ±10% on radiometric power measurements.
Peak Wavelength Bins
Table 6. Peak wavelength definitions for LUXEON UV FC Line.
PeaK WaVelength [1] (ꢀꢂ)
BIn
mInImum
maXImum
385
Ax
Bx
Cx
Dx
Ex
Fx
380
385
390
395
400
405
410
415
390
395
400
405
410
Gx
415
Hx
420
Notes for Table 6:
1. Lumileds maintains a tolerance of ±2nm on peak wavelength measurements.
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
14
Forward Voltage Bins
Table 7. Forward voltage bin definitions for LUXEON UV FC Line.
ForWard Voltage [1] (V)
BIn
mInImum
maXImum
2.8
7
8
9
0
1
2
3
4
T
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
2.8
3.0
3.2
3.4
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.0
V
W
X
3.2
3.4
3.6
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.05V on forward voltage measurements.
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
15
Mechanical Dimensions
ANODE
Figure 10aꢀ Mechanical dimensions for LUXEON UV FC1ꢀ
Figure 10bꢀ Mechanical dimensions for LUXEON UV FC2ꢀ
Notes for Figures 10a and 10b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
16
Reflow Soldering Guidelines
tp
Tp
Critical Zone
L to Tp
Ramp-up
T
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 11. Visualization of the acceptable reflow temperature profile as specified in Table 8.
Table 8. Reflow profile characteristics for LUXEON UV FC Line (non-AuSn solder system)[1]
ꢀ
ProFIle Feature
lead-Free assemBly
Preheat Minimum Temperature (Tsmin
)
150°C
200°C
Preheat Maximum Temperature (Tsmax
)
Preheat Time (tsmin to tsmax
)
60 to 120 seconds
3°C / second maximum
217°C
Ramp-Up Rate (TL to Tp)
Liquidus Temperature (TL)
Time Maintained Above Temperature TL (tL)
Peak / Classification Temperature (Tp)
Time Within 5°C of Actual Temperature (tp)
Ramp-Down Rate (Tp to TL)
60 to 150 seconds
260°C
20 to 40 seconds
6°C / second maximum
8 minutes maximum
Time 25°C to Peak Temperature
Notes for Table 8:
1. Characteristics are for non-AuSn lead-free solder system only. For AuSn (gold-tin) solder system, see AB116 for more details.
JEDEC Moisture Sensitivity
Table 9ꢀ Moisture sensitivity levels for LUXEON UV FC Lineꢀ
Floor lIFe
soaK requIrements standard
leVel
tIme
condItIons
tIme
168 Hours +5 / -0
condItIons
1
Unlimited
≤30°C / 85% RH
85°C / 85% RH
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
17
Solder Pad Design
Figure 12aꢀ Recommended PCB solder pad layout for LUXEON UV FC1ꢀ
0.60
0.50
0.075
Solder mask
Stencil
Top copper
1.35 1.20
Package center
0.20
1.40
Figure 12bꢀ Recommended PCB solder pad layout for LUXEON UV FC2ꢀ
Notes for Figures 12a and 12b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
18
Packaging Information
Pocket Tape Dimensions
Figure 13ꢀ Pocket tape dimensions for LUXEON UV FC1ꢀ
Reel Dimensions
Figure 14ꢀ Reel dimensions for LUXEON UV FC1ꢀ
Notes for Figure 13 and 14:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
19
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
©2017 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS185 LUXEON UV FC Line
Product Datasheet 20170710
相关型号:
©2020 ICPDF网 联系我们和版权申明