MP-3030-2100-40-70 [LUMINUS]
High-Performance Mid Power LED (1.0W);型号: | MP-3030-2100-40-70 |
厂家: | Luminus |
描述: | High-Performance Mid Power LED (1.0W) 光电 |
文件: | 总15页 (文件大小:1732K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MP-3030-2100
Mid Power Product Datasheet
High-Performance
3030 Mid Power LED (1.0W)
Features:
• High efficacy
Table of Contents
• CRI Options: Minimum 70, 80, 90, 95
• Low thermal resistance
Technology Overview ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ2
Product Selection Table ꢀ ꢀ ꢀ ꢀ3
Operating Characteristics ꢀ ꢀ6
Chromaticity Diagramꢀ ꢀ ꢀ ꢀ ꢀ ꢀ8
Color Ranks ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ7
Chromaticity Coordinate Group
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ7
Characteristics Graphsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ9
Ordering Nomenclature ꢀ ꢀ ꢀ ꢀ4
Package Dimension ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 11
Soldering Pad Pattern ꢀ ꢀ ꢀ ꢀ 11
Dimension and Polarityꢀ ꢀ ꢀ 11
Reel & Box Packagingꢀ ꢀ ꢀ ꢀ ꢀ 13
• Compatible with automatic placement equipment
• Compatible with infrared reflow solder process
• RoHs and REACH compliant
Applications
• Replacement lamps
• Down lights
• Architectural lighting
• Panel lighting
1
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
Technology Overview
Luminus mid power LEDs are lighting class solutions designed for high performance general lighting applicationsꢀ These state-of-the-art
LEDs allow illumination engineers and designers to develop lighting solutions with maximum efficacy, brightness and overall qualityꢀ
Reliability
REACH & RoHS Compliance
Luminus mid power LED is one of the most reliable light sources
in the world todayꢀ Having passed a rigorous suite of
environmental and mechanical stress tests, including
mechanical shock, vibration, temperature cycling and humidity,
it is fully qualified for use in a wide range of high performance
and high efficacy lighting applicationsꢀ
The Luminus 3030 Mid Power LED is compliant to the Restriction
of Hazardous Substances Directive or RoHSꢀ
Understanding Luminus Mid Power LED Test Specifications
Every Luminus LED is fully tested to ensure it meets the high quality standards customers have come to expect from Luminus productsꢀ
Testing Temperature
Luminus Mid Power products are measured at a case temperature of 25 ºC and placed into intensity, chromaticity and voltage bins as
described herein
2
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
Product Selection Table
Standard test condition = 150 mA, T =25 °C
c
Minimum Flux @
150mA
Typical Flux
@150mA
(Lumens)
Typical Flux
@65mA
(Lumens)
Nominal CCT
Minimum CRI
Ordering Part Number
(Lumens)
2200K
MP-3030-2100-22-80
MP-3030-2100-27-80
MP-3030-2100-27-90
MP-3030-2100-27-95
MP-3030-2100-30-80
MP-3030-2100-30-90
MP-3030-2100-30-95
MP-3030-2100-35-80
MP-3030-2100-35-90
MP-3030-2100-40-70
MP-3030-2100-40-80
MP-3030-2100-40-90
MP-3030-2100-40-95
MP-3030-2100-50-70
MP-3030-2100-50-80
MP-3030-2100-57-70
MP-3030-2100-57-80
MP-3030-2100-57-95
MP-3030-2100-65-70
MP-3030-2100-65-80
100
107
100
94
114
125
107
99
54
60
51
47
63
54
50
66
56
72
67
57
53
72
67
72
67
53
72
67
80
80
90
95
80
90
95
80
90
70
80
90
95
70
80
70
80
95
70
80
2700K
114
100
94
132
112
104
138
117
150
140
119
110
150
140
150
140
122
150
140
3000K
3500K
114
107
130
122
107
100
130
122
139
130
107
139
130
4000K
5000K
5700K
6500K
*Tolerance of measurements of the luminous flux is ±±7
* Tolerance of measurements of the CRI is ±ꢀ
*IFP condition with Pulse: Width ≤100μs Duty cycle ≤1/10
3
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Incoming Quality Control Specification
Product Ordering and Shipping Part Number Nomenclature
All mid power products are packaged and labeled with part numbers as outlined in belowꢀ When shipped, each reel will contain only a
single flux and voltage binꢀ The part number designation is as follows:
3030 Mid Power LEDs
Package
Type
Package
Configurator
Mid Power
Nominal CCT
Minimum CRI
MP
3030
2100
##
##
Example :
The part number MP-3030-2100-30-80 refers to a 3030 mid power emitter with nominal color temperature of 3,000k and minimum CRI of 80. Please refer to
page 5 for a description of available CCT and CRI combinations.
Note 1: CCT Codes:
27 = 2700 k
30= 3000 k
Note 2: CRI Codes:
70
80
90
40 = 4000 k
50 = 5000 k
57= 5700 k
65 = 6500 k
Each mid power product shipped will be labeled with its specific flux and voltage binsꢀ Not all bins listed are available in all CCTs and CRIsꢀ
Test condition = 150 mA, T =25 °C
c
Forward Voltage Bins (T =25°C)
c
Bin Code
Minimum Voltage (Volts)
Maximum Voltage ( Volts)
J*
K*
T*
5.8
6.0
6.2
6.0
6.2
6.4
Tolerance of measurements o f forward voltage is ±0.1V
* Note: Effective in production starting August 2017, replacing the old bin structure X=5.8-6.1, Y=6.1-6.4
4
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Incoming Quality Control Specification
Each mid power product shipped will be labeled with its specific flux and voltage binsꢀ Not all bins listed are available in all CCTs and CRIsꢀ
Test condition = 150 mA, T =25 °C
c
Luminus Flux Bins
Bin Code
1Z
Minimum Flux (Lumens)
Maximum Flux (Lumens)
87
94
2A
94
100
107
114
122
130
139
148
156
164
172
2B
100
107
114
122
130
139
148
156
164
2C
2D
2E
2F
2G
2H
2J
2K
5
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
3030 Mid Power Operating Characteristics
Optical and Electrical Characteristics(T =25ꢀC)
c
Parameter
Symbol
Vf
Minimum
Typical
Maximum
Unit
V
Condition
If=150mA
Vr=5V
Forward Voltage
Reverse Current
View Angle
6ꢀ0
6ꢀ4
10
Ir
uA
º
2θ1/2
Rthj-sp
ESD
110
11
If=150mA
If=150mA
Thermal Resistance
Electrostatic Discharge
ºC/W
V
1000
Note 1: To prevent damage refer to operating conditions and derating curves for appropriate maximum operating conditions
Note 2: Maximum operating case temperature combined with maximum drive current defines the total maximum operating condition for the device. To
prevent damage, please follow derating curves for all operating conditions.
Note 3: Mid power LEDs are designed for operation up to an absolute maximum forward drive current as specified above. Product lifetime data is specified at
typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to typical
forward drive currents. Actual device lifetimes will also depend on case temperature. Refer to the current vs. case temperature derating curves for
further information.
Note 4: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.
Absolute Maximum Ratings (T =25ꢀC)
c
Parameter
Symbol
Rating
Unit
mA
mA
mW
V
Forward Current
If
240
Pulse Forward Current
Power Dissipation
Reverse Voltage
Ifp
300
Pd
Vr
1,632
5
Operating Temperature
Storage Temperature
Junction Temperature
Soldering Temperature
Topr
Tstg
Tj
-40~+85
°C
-40~+85
°C
125
°C
Tsld
230 °C or 260 °C for 10 sec
*IFP condition with Pulse: Width ≤100μs Duty cycle ≤1/10
6
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
Color Bins
Color Code
Center (Tc=25 °C)
x
Radius
Angle(deg)
ϕ
y
a
b
22m5
27m5
30m5
35m5
40m5
50m5
57m7
65m7
0.5018
0.4620
0.4383
0.4073
0.3875
0.3507
0.3348
0.3187
0.4152
0.4145
0.4081
0.3917
0.3868
0.3635
0.3491
0.3363
0.013500
0.013500
0.013900
0.015450
0.015650
0.013700
0.013410
0.013380
0.00700
0.00700
0.00680
0.00690
0.00670
0.00590
0.00660
0.00570
59.90
53.42
53.13
53.13
53.43
59.37
58.35
58.34
Ellipse Definition
*Note: Tolerance of measurements of the chromaticity Coordinate is ±0.005
Chromaticity coordinates as per ANSI standard.
7
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
te Group
oordina
ticity C
Chroma
Chromaticity Coordinates
at Tc= 85° C
CIEx
8
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
Typical optical/Electrical Characteristics Graphs
Vf-------If
If---- Relative Luminous flux
Tc=25°C
Tc=25°C
Forward Current (mA)
Forward Voltage (V)
T -----Relative Luminous Flux
Wavelength- Relative Emission Intensity
c
If=150mA
Wavelength(nm)
Temperature (°C)
9
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
3030Mid Power Product Datasheet
Preliminary
haracteristic
lectrical C
Optical/E
Typical
Typical Polar Radiation Pattern
Ambient Temperature-Allowable Forward Current
Ambient Temperature (ꢀC)
T --Forward Voltage
Forward Current-Chromaticity Coordinate
c
If=150mA
Tc (ꢀC)
10
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
Package Dimension (mm)
Note: The mark (dot) on top of the LED indicates the cathode for products manufactured in October 2016 and later.
Products manufactured before October 2016 have the mark (dot) on the anode side.
Recommended Soldering Pad Pattern
Note: tolerance : .X: 0.10mm .XX: 0.05mm
11
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
f Tape(mm)
imensions O
Package D
User feed direction
End
Start
Not less than 160mm spaces
End
Not less than 400mm spaces
Leader
Capacity per reel
(5000 PCs LEDs)
12
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
Package Dimensions of Reel (mm)
User feed direction
Upper Band
Carrier tape
ꢁ13 mm
ꢁ165ꢀ1mm(6ꢀ5 inch)
Package Dimensions of Reel (mm)
Label: contains the type, Lot #,
Quantity, Product parameters
Desiccant (bag)
Vacuum sealed
antistatic bag
Humidity Card (bag)
Label: contains the type, Lot #,
Quantity, Product parameters
13
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
aging
Box Pack
Label: contains the type,
Lot #, Quantity, Product
parameters
*Capacity 5 reels per box
Label: contains the type,
Lot #, Quantity, Product
parameters
*Capacity 10 reels per box
14
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
MP-3030-2100
Mid Power Product Datasheet
for Use
Precaution
Storage:
1ꢀ
2ꢀ
This device is rated at MSL 3 per JEDEC J-STD-020 standardꢀ
Recommended storage condition:
At 5 °C- 30 °C and relative humidity 60% RH in its original package
3ꢀ
After this bag is opened, devices that will be applied to infrared reflow, vapor - phase reflow, or equivalent soldering process
must be:
a)
b)
c)
Completed within 168 hours
Stored at less than 60%RH
If not completely used within 168 hours, seal the remaining in the moisture barrier bag
4ꢀ
5ꢀ
Devices require baking before mounting, if 3 a) is not metꢀ
If baking is required, devices must be baked under below conditions:
24 hours at 60 °C +/- 5 °C
Static Electricity:
1ꢀ The products are sensitive to static electricity, and care should be taken when handling themꢀ
2ꢀ Static electricity or surge voltage will damage the LEDsꢀ It is recommended to wear a anti-electrostatic wristband or an anti-elec-
trostatic gloves when handling the LEDsꢀ
3ꢀ All devices, equipment and machinery must be properly groundedꢀ It is recommended that measures be taken against surge volt-
age to the equipment that mounts the LEDsꢀ
15
PDS-002727 Rev 06 © 2017 Luminus Devices, Inc. - All Rights Reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明