PT-39-DR [LUMINUS]
Deep Red and Green LED Chipset;
| 型号： | PT-39-DR |
| 厂家： | 
Luminus |
| 描述： | Deep Red and Green LED Chipset |
| 文件： | 总11页 (文件大小：1507K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PT-39-DR/G-L51Product Datasheet
PT-39-L51-TE
Deep Red and Green
LED Chipset
Features:
• Matched Chipset with 2.09 mm × 1.87 mm (3.9 mm2) emitting area
• Ultra-low thermal resistance, 1.2°C/W junction-to-heat sink
• Targeted peak wavelengths: Deep-red 650 nm, Green 520 nm
• LED mounted on copper core-PCB for easier thermal and optical integration
• RoHS (EU-2002/95/EC Directive) and REACH compliant
Table of Contents
Technology Overview . . . . . .2
Binning Structure . . . . . . . . . .3
Optical & Electrical
Characteristics . . . . . . . . . . . . .4
Optical & Electrical
Characteristics Graphs. . . . . .5
Optical Spectrum . . . . . . . . . .8
Thermal Resistance . . . . . . . .9
Mechanical Dimensions . . 10
Applications
• Life Sciences
• Medical
• Microdisplay
• Fiber Coupling
• Horticulture
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
1
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51 Product Datasheet
Technology Overview
Luminus LEDs benefit from innovations in device technology, chip packaging and thermal management. This suite of technologies give
engineers and system designers the freedom to develop solutions both high in power and efficiency.
Luminus Technology
Reliability
Luminus’technology enables large area LED chips to emit
photons uniformly over the entire LED chip surface. The intense
optical power density produced by these devices facilitate
designs which replace arc and halogen lamps where arrays of
traditional high power LEDs cannot.
Luminus LEDs are designed from the ground up to deliver one
of the most reliable light sources in the world today. Luminus
LEDs have passed a rigorous suite of environmental and
mechanical stress tests, including mechanical shock, vibration,
temperature cycling and humidity, and have been fully qualified
for use in extreme high power and high current applications.
With very low failure rates and median lifetimes that typically
exceed 10,000 hours, Luminus LEDs are ready for even the most
demanding applications.
Luminus engineers their parts to maximize light extraction and
to emit with a Lambertian far-field distribution pattern. The
design maximizes efficiency and allows for flexible optical
designs.
Environmental Benefits
Packaging Technology
Luminus LEDs help reduce power consumption and the amount
of hazardous waste entering the environment. All Luminus LED
products manufactured by Luminus are RoHS compliant and
free of hazardous materials, including lead and mercury.
Thermal management is critical in high power LED applications.
Luminus PT-39 LEDs have the lowest thermal resistance of any
LED on the market with a thermal resistance from junction to
heat sink of 1.2°C/W. This allows the LED to be driven at higher
current densities while maintaining a low junction temperature,
thereby resulting in brighter solutions and longer lifetimes.
Understanding Luminus LED Test Specifications
Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products.
Testing Temperature
Operating Points
Luminus core board products are typically measured in such a
way that the characteristics reported agree with how the
devices will actually perform when incorporated into a system.
This measurement is accomplished by mounting the devices on
a 40ºC heat sink. This method of measurement ensures that
Luminus LEDs perform in the field just as they are specified.
The tables on the following pages provide typical optical and
electrical characteristics. The LEDs can be operated over a wide
range of drive conditions(currents from <1A to 12 A, and duty
cycle from <1% to 100%).
PT-39 devices are production specified at 7.5 A. Any other values
shown are for additional reference at other possible drive
conditions.
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
2
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51ProductDatasheet
PT-39 Binning Structure
PT-39 LEDs are specified for luminous flux and chromaticity/wavelength at a drive current of 7.5 A (1.92 A/mm2) and placed into one of
the following Power Bins and Wavelength Bins:
Power Bins
Color
Power Flux Bin (FF)
Minimum Flux (W)
Maximum Flux (W)
BD
BE
BF
2.6
2.8
3.0
2.8
3.0
3.2
Deep Red
CD
CE
CF
2.6
2.8
3.0
2.8
3.0
3.2
Green
*Note: Luminus maintains a +/- 6% tolerance on power measurements.
Peak Wavelength Bins
Minimum Wavelength Maximum Wavelength
Color
Wavelength Bin (123)
(nm)
(nm)
R10
R11
645
650
650
655
Deep Red
G2
G3
G4
G5
510
515
520
525
515
520
525
530
Green
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
3
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51ProductDatasheet
Reference Optical & Electrical Characteristics (Ths = 40°C)1,2
Unit
A/mm2
V
Symbol
j
Deep Red
1.92
2.1
Green
1.92
3.0
Current Density3,4
Forward Voltage
VF min
VF, typ
VF max
Φtyp
ΦR
2.3
5.0
V
3.0
5.5
V
Radiometric Flux5
Radiometric Flux Density5
Peak Wavelength Range
Peak Wavelength5
FWHM5
2.7
2.7
W
0.74
645 - 655
650
0.74
510 - 530
520
W/mm2
nm
nm
nm
λ
λp
Δλ1/2
20
33
Symbol
Deep Red
3.9
Green
3.9
Unit
mm2
Emitting Area
Emitting Area Dimensions
1.87 x 2.09
1.87 x 2.09
mm × mm
Absolute Maximum Ratings
Symbol
Deep Red
Green
200
Unit
mA
A
Minimum Current (CW or Pulsed)CW6
Maximum Current CW6
200
10
10
Maximum Current Pulsed6
12
12
A
Maximum Junction Temperature6,7
Tjmax
110
150
°C
Storage Temperature Range
-40 to +100
-40 to +100
°C
Note 1: Data verified using NIST traceable calibration standard.
Note 2: All data are based on test conditions with a constant heat sink temperature Ths = 40°C under pulse testing conditions. Pulse duration 20 msec, single
pulse.
Note 3: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 7.5 A.
Note 4: Listed drive conditions are typical for common applications. Drive current and duty cycle should be adjusted as necessary to maintain the junction
temperature desired to meet application lifetime requirement.
Note 5: Typical values
Note 6: Product performance and lifetime data is specified at recommended forward drive currents. Sustained operation at or near absolute minimum or
maximum currents may result in reduced device performance or lifetime compared to operation at recommended foward currents.
Note 7: Sustained operation at or above Maximum Operating Junction Temperature (Tjmax) will result in reduced device life time.
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
4
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51ProductDatasheet
Optical & Electrical Characteristics Graphs
Relative Power vs If [A]
Deep Red
Green
Relative Power vs Forward Current (If)
Normalized to 6ꢀA and Tj ꢀ=ꢀ100°C
Relative Power vs Forward Current (If)
Normalized to 6ꢀA and Tj ꢀ=ꢀ120°C
2.00
1.80
1.60
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0.00
1.60
1.40
1.20
1.00
0.80
0.60
0.40
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
6
7
8
9
10
10
10
11
11
11
12
12
12
If - Forward Current [Amps]
If - Forward Current [Amps]
Change in Vf vs If [A]
Deep Red
Green
Change in Forward Voltage (Vf) vs Forward Current (If)
Referenced to 6ꢀA and Tj ꢀ=ꢀ100°C
Change in Forward Voltage (Vf) vs Forward Current (If)
Referenced to 6ꢀA and Tj ꢀ=ꢀ120°C
0.50
0.40
0.30
0.20
0.10
0.00
-0.10
-0.20
-0.30
1.20
1.00
0.80
0.60
0.40
0.20
0.00
-0.20
-0.40
-0.60
-0.80
-1.00
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
6
7
8
9
If - Forward Current [Amps]
If - Forward Current [Amps]
Change in λp [nm] vs If [A]
Deep Red
Green
Change in Peak Wavelength (λp) vs Forward Current (If)
Referenced to 6ꢀA and Tj ꢀ=ꢀ100°C
Change in Peak Wavelength (λp) vs Forward Current (If)
Referenced to 6ꢀA and Tj ꢀ=ꢀ120°C
0.10
0.08
0.06
0.04
0.02
0.00
-0.02
-0.04
-0.06
-0.08
-0.10
1.50
1.00
0.50
0.00
-0.50
-1.00
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
6
7
8
9
If - Forward Current [Amps]
If - Forward Current [Amps]
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
5
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51ProductDatasheet
Optical and Electrical Characteristics Graphs
Change in FWHM vs If [A]
Deep Red
Green
Change in Full-Width Half-Maximum vs Forward Current (If)
Referenced to 6ꢀA and Tj ꢀ=ꢀ120°C
Change in Full-Width Half-Maximum vs Forward Current (If)
Referenced to 6ꢀA and Tj ꢀ=ꢀ100°C
2.00
1.50
1.00
0.50
0.00
-0.50
-1.00
-1.50
-2.00
2.00
1.50
1.00
0.50
0.00
-0.50
-1.00
-1.50
2
3
4
5
6
7
8
9
10
11
12
120
120
2
3
4
5
6
7
8
9
10
11
12
If - Forward Current [Amps]
If - Forward Current [Amps]
Relative Power vs Tj [°C]
Deep Red
Green
Relative Power vs Junction Temperature (Tj)
Relative Power vs Junction Temperature (Tj)
Normalized to 80°C
Normalized to 80°C
1.3
1.2
1.1
1
1.2
1.15
1.1
1.05
1
0.9
0.8
0.7
0.6
0.5
0.95
0.9
0.85
0.8
40
50
60
70
80
90
100
110
120
40
50
60
70
80
90
100
110
Tj - Junction Temperature [°C]
Tj - Junction Temperature [°C]
Change in Vf vs Tj [°C]
Deep Red
Green
Change in Forward Voltage (Vf) vs Forward Current (If)
Referenced to 6ꢀA and Tj ꢀ=ꢀ100°C
Change in Forward Voltage (Vf) vs Junction Temperature (Tj)
Referenced to 80°C
0.50
0.40
0.30
0.20
0.10
0.00
-0.10
-0.20
-0.30
0.15
0.1
0.05
0
-0.05
-0.1
-0.15
2
3
4
5
6
7
8
9
10
11
12
40
50
60
70
80
90
100
110
If - Forward Current [Amps]
Tj - Junction Temperature [°C]
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
6
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51 Product Datasheet
Optical and Electrical Characteristics Graphs
Change in λp vs Tj [°C]
Deep Red
Green
Change in Peak Wavelength (λp) vs Temperature (Tj)
Change in Peak Wavelength (λp) vs Temperature (Tj)
Referenced to 80°C
Referenced to 80°C
8
6
1
0.8
0.6
0.4
0.2
0
4
2
0
-0.2
-0.4
-0.6
-0.8
-1
-2
-4
-6
-8
40
50
60
70
80
90
100
110
120
40
50
60
70
80
90
100
110
120
Tj - Junction Temperature [°C]
Tj - Junction Temperature [°C]
Change in FWHM vs Tj [°C]
Deep Red
Green
Change in Full-Width Half-Maximum (FWHM) vs Temperature (Tj)
Change in Full-Width Half-Maximum (FWHM) vs Temperature (Tj)
Referenced to 80°C
Referenced to 80°C
4
3
4
3
2
2
1
1
0
0
-1
-2
-3
-4
-1
-2
-3
-4
40
50
60
70
80
90
100
110
120
40
50
60
70
80
90
100
110
120
Tj - Junction Temperature [°C]
Tj - Junction Temperature [°C]
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
7
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51ProductDatasheet
Optical Spectrum (Typical)
PT-39-DR
PT-39-G
1.2
1
0.8
0.6
0.4
0.2
0
450 475 500 525 550 575 600 625 650 675 700
Angular Intensity Distribution (Typical)
Green LED
Red LED
120%
120%
100%
80%
60%
40%
20%
0%
cosine function
cosine function
100%
80%
60%
40%
20%
0%
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
Angle [degrees]
Angle [degrees]
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
8
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51ProductDatasheet
Thermal Resistance
Typical Thermal Resistance
Window
Tj
Die Junction
Window Frame
1
Rθj-b
1.0°C/W
0.2°C/W
1.2°C/W
Tc
2
Rθb-hs
1,2
Rθj-hs
Ths
Copper Core-Board
Thermal Interface Material
Heat Sink
T
deꢀnition = 3 mm from core-board
Ta
hs
Note 1: Thermal resistance values are based on modeled results correlated to measured Rθj-hs data using the wavelength shift method.
Note 2: Thermal Resistance is based on eGraf 1205 Thermal interface.
Electrical Pinout
1
2
3
4
5
6
7
8
+
+
-
-
-
-
+
+
Green and Deep Red Devices
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
9
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51 Product Datasheet
Mechanical Dimensions
DIMENSIONS IN MILLIMETERS
+
0.50
0.25
21.85
-
10.50
1.87
EMITTING
AREA
2.09
EMITTING
AREA
PIN 1
E
E
+
0.38
0.13
15.00
10.50
-
DEEP RED LED DEVICE
PIN 8
THERMOCOUPLE
PAD
1.70
1.60
2X 2.90±0.10
ALIGNMENT HOLES
FASTENER HOLES
D
GREEN LED DEVICE
3.7
1.83±0.10
SECTION E-E
PIN ASSIGNMENTS
CATHODE (-)
LED COLOR
DEEP RED
GREEN
ANODE (+)
1,2,7,8
"A"
''B''
3,4,5,6
"C"
DETAIL D
DIMENSION
NOMINAL
DESCRIPTION
TOLERANCE
NAME
"A"
DIMENSION
0.88
TOP OF METAL SUBSTRATE TO TOP OF WINDOW
TOP OF DIE EMITTING AREA TO TOP OF WINDOW
TOP OF METAL SUBSTRATE TO TOP OF DIE EMITTING AREA
0.13
0.11
0.02
"B"
"C"
0.65
0.23
Notes:
1) Deep-Red and Green PT-39-L51, Big Chip LEDs are individually assembled into a common anode copper core- board with a footprint of 21.85mm x 15
mm.
2) Dimensions above are for information only. Please refer to the latest revision of the DWG-002140 package outline mechanical specifications.
3) Connector Information:
Manufacturer: Tarng-Yu: Part # TU1512HNO-08-M5
4) PT-39-L51 Mating Connector Cable Assembly ordering part number (for evaluation purposes only): 960041
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
10
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
PT-39-DR/G-L51 Product Datasheet
Ordering Part Number
Color
Description
PT-39 -DR consisting of a 3.9 mm2 LED, with a minimum power of 2.6W, a
wavelength range from 645nm to 655nm, a connector and a copper-core PCB.
PT-39 -G consisting of a 3.9 mm2 LED, with a minimum power of 2.6W, a
wavelength range from 510nm to 530nm, a connector and a copper-core PCB.
Deep Red
Green
PT-39-DR-L51-BD100
PT-39-G-L51-CD100
History of Changes
Rev
Date
Description of Change
01
04/25/2016
Initial Release
Updated max Vf specification from 5.0 to 5.5V and typical from 4.0 to 5.0V. Added min forward cur-
rent = 200 mA.
02
04/13/2017
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
11
PDS-002677 Rev02
© 2017 Luminus Devices, Inc. - All Rights Reserved
1145 Sonora Court Sunnyvale, CA 94086 USA
相关型号：
©2020 ICPDF网 联系我们和版权申明