SST-10-R [LUMINUS]
Red LED High Power Red LED with Peak Wavelength of 630nm;
| 型号： | SST-10-R |
| 厂家： | 
Luminus |
| 描述： | Red LED High Power Red LED with Peak Wavelength of 630nm |
| 文件： | 总12页 (文件大小：2173K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SST-10-Red Product Datasheet
SST-10-R
Red LED
Features:
• High Power Red LED with Peak Wavelength of 630nm
• Wall-Plug Efficiency: typ. 44% @350mA
• 90 or 130° viewing angle at 50% Iv
• Low Thermal Resistance
Table of Contents
SST-10 Binning Structure . . .2
Product Shipping & Labeling
Information. . . . . . . . . . . . . . . .3
• Built-in ESD Protection
• RoHS and REACH compliant
Optical and Electrical
Characteristics . . . . . . . . . . . . .4
B130 - Mech. Dimensions . . .6
B130 - Tape and Reel . . . . . . .7
B90 - Mech. Dimensions . . . .8
B90 - Tape and Reel. . . . . . . . .9
Soldering Profile . . . . . . . . . 10
Precautions for Use. . . . . . . 11
History of Changes . . . . . . . 12
Applications
• Horticulture / Growlights
• Accent and effect lighting
• Architectural lighting
• Stage lighting
Luminus Devices, Inc. • T 408.708.7000
•
www.luminus.com
1
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
1145 Sonora Court
• Sunnyvale, CA 94086
SST-10-Red Product Datasheet
SST-10 Binning Structure
SST-10 Red LEDs are tested for luminous flux and chromaticity at a drive current of 350mA - 20ms single pulse and placed into one of the
following luminous flux (FF) and chromaticity (WW) bins:
Flux Bins - Test condition=350mA, 25ꢀC, 20ms pulse
Flux Bin (FF)
Minimum Flux (mW)
Maximum Flux (mW)
F
G
H
J
230
270
310
350
270
310
350
390
Dominant Wavelength Bins - Test condition=350mA, 25ꢀC, 20ms pulse
Chromaticity Bin (WW)
Minimum Dominant Wavelength (nm)
Maximum Dominant Wavelength (nm)
615
620
615
620
620
625
625
625
630
*Note: Luminus maintains a +/- 6% tolerance on flux measurements.
Ordering Information
Products
SST-10-R-B90
SST-10-R-B130
Ordering Part Number
SST-10-R-B90-xx123
SST-10-R-B130-xx123
Description
High Power 1-mm2 Red LED in a 3535 surface mount package and a 90-de-
gree lens
High Power 1-mm2 Red LED in a 3535 surface mount package and a
130-degree lens
2
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Part Number Nomenclature
SST
10
<A>
<B###>
<FF###>
Product Family
LED Emission Area
Color
Package Configuration
Bin kit
Flux and Chromaticity bin kit
code - See available ordering
codes below
SST: Surface Mount
Package
<A>: Color
R = Red
B90: 90-degree lens
B130: 130-degree lens
10: 1.0 mm2
SST-10 Bin Kit Order Codes
The following table describes the bin kit ordering codes available for the SST-10 Red LEDs. Each bin kit specifies a minimum flux as well as
specific chromaticity bins allowed. Please note that within each kit a maximum flux is not specified and as a result Luminus may ship any
part meeting or exceeding the minimum flux specification. Shipments will always meet the listed chromaticity bins. For information on
ordering bin kits not listed below, please contact Luminus.
SST-10 Red Bin Kit Order Codes
Luminous Flux
Color
Red
Chromaticity Bins
Kit Number
F630
Bin Kit Flux
Code
Min. Flux
230
F
615,620,625
Product Shipping & Labeling Information
All SST-10 products are packaged and labeled with their respective bin as outlined in the tables on pages 2 & 3. Each reel will only
contain one bin.
SST-10 Red
SST
10
R
BXXX
FFWW
Product Family
LED Emission Area
Color
Package Configuration
Bin kit
SST: Surface Mount
Package
B90: 90-degree lens
B130: 130-degree lens
Flux and Chromaticity bin kit
code as outlined above
10: 1.0 mm2
Color
3
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Optical and Electrical Characteristics5
Optical and Electrical Characteristics at 350mA1
Parameter
Forward Current2
Symbol
Minimum
Typical
350
Maximum
Unit
mA
If
Φr
1,500
Output Power
320
mW
V
Forward Voltage
Wall-Plug Efficiency
Viewing Angle
Vf
1.8
2.1
2.6
WPE
2 Ø1/2
λd
44
%
90 or 130
621
degrees
nm
Dominant Wavelength
615
16
627
24
FWHM
Dλ1/2
20
nm
Thermal Resistance (Electrical)
RTH
5.3
°C/W
Absolute Maximum Ratings2
Parameter
Symbol
Rating
Unit
Forward Current3,4
Power Dissipation
Reverse Voltage
I
1.5
A
Pd
Vr
TsTG
TJ
5.0
W
V
5
Storage Temperature
Junction Temperature3,4
Soldering Temperature
ESD Sensitivity (HBM)
-40~100
°C
°C
115 ºC
Tsld
Vb
JEDEC 020, 260 ºC
6000
V
Note 1: Ratings are based on operation at a constant junction temperature of Tj = 25ºC.
Note 2: To prevent damage, please refer to operating conditions and derating curves for appropriate maximum operating conditions
Note 3: Maximum operating case temperature combined with maximum drive current defines the total maximum operating condition for the device. To
prevent damage, please follow derating curves for all operating conditions.
Note 4: Luminus SST-10-Red LEDs are designed for operation up to an absolute maximum forward drive current as specified above. Product lifetime data is
specified at typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared
to typical forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the current vs. junction temperature
derating curves for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds.
Note 5: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye.
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
4
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Optical and Electrical Characteristics
Relative Output Flux vs. Forward Current
Relative Output Flux vs. Junction Temperature
Typical Polar Radiation Plot - B130
Forward Current vs. Forward Voltage
Typical Spectra
Typical Polar Radiation Plot - B90
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
5
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Mechanical Dimensions - B130 Package
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
6
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Tape and Reel - B130 Package
4.00±0.10
.157±.004
0.10
0.00
.004
.000
+
2.00±0.10
.079±.004
3.80
0.10
+
1.50
0.00
.004
+
.150
A
-
+
1.75±0.10
.069±.004
CATHODE SIDE
.059
-
.000
0.10
0.00
+
4.18
B
B
+
.004
.000
5.0°
.165
-
12.00±0.20
.472±.008
1.70±0.10
.067±.004
5.50±0.05
.217±.002
0.25±0.05
SECTION A-A
8.00±0.10
.315±.004
ANODE SIDE
A
0.10
+
3.80
0.00
+
.004
.000
.150
0.10
0.00
+
-
4.18
+
.004
.000
NOTES:
.165
-
1. FINAL TAPE AND REEL PACKAGING MUST MEET THE
REQUIREMENTS OF JEDEC-STD-033, LEVEL 2A.
0.10
0.00
.004
.000
+
2.20
2. LEAVE 304.8mm [12.00 in] OF TAPE EMPTY FOR LEAD IN
(38 EMPTY POCKETS).
5.0°
+
-
.087
3. LEAVE 457.2mm [18.00 in] OF TAPE EMPTY FOR TRAILER
(57 EMPTY POCKETS).
SECTION B-B
4. MUST COMPLY TO EIA-481-C-2003
12.4
.488
UNREELING DIRECTION
178
7
21.3
.839
3X
2.00
.079
13
.512
16.0
.630
C
120°
DETAIL C
UNREELING DIRECTION
TOP VIEW
DETAIL D
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
7
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Mechanical Dimensions - B90 Package
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
8
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Tape and Reel - B90 Package
4.00±0.05
.157±.002
2.00±0.10
.079±.004
0.10
0.00
.004
.000
+
1.50
A
1.75±0.10
.069±.004
+
-
CATHODE SIDE
.059
3.60±0.10
.142±.004
B
B
7.0°
12.00±0.20
.472±.008
1.50±0.10
.059±.004
5.50±0.05
.217±.002
0.25±0.05
8.00±0.10
.315±.004
ANODE SIDE
A
SECTION A-A
3.67±0.10
.144±.004
NOTES:
1. FINAL TAPE AND REEL PACKAGING MUST MEET THE
REQUIREMENTS OF JEDEC-STD-033, LEVEL 2A.
2. LEAVE 304.8mm [12.00 in] OF TAPE EMPTY FOR LEAD IN
(38 EMPTY POCKETS).
2.48±0.10
.098±.004
7.0°
3. LEAVE 457.2mm [18.00 in] OF TAPE EMPTY FOR TRAILER
(57 EMPTY POCKETS).
SECTION B-B
4. MUST COMPLY TO EIA-481-C-2003
96
3.8
UNREELING DIRECTION
560
22.0
77
3.0
UNREELING DIRECTION
TOP VIEW
DETAIL D
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
9
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Soldering Profile
Profile Feature
Preheat & Soak
Temperature min (Tsmin)
Temperature max (Tsmax)
Time (Tsmin to Tsmax) (ts)
Sn-Pb Eutectic Assembly
Pb-Free Assembly
100 °C
150 °C
60-120 seconds
150 °C
200 °C
60-120 seconds
Average ramp-up rate (Tsmax to Tp)
3 °C/second max
3 °C/second max
Liquidous temperature (TL)
Time at liquidous (tL)
183 °C
60-150 seconds
217 °C
60-150 seconds
Peak package body temperature (Tp)*
Classification temperature (Tc)
230 °C ~235 °C
255 °C ~260 °C
260 °C
235 °C
Time (tp) within 5 °C of the specified
classification temperature (Tc)**
20 seconds
30 seconds
Average ramp-down rate (Tp to Tsmax)
Time 25 °C to peak temperature
6 °C/second max
6 minutes max
6 °C/second max
8 minutes max
* Tolerance for peak profile temperature(Tp) is defined as a supplier minimum and a user maximum.
** Tolerance for time at peak profile temperature(tp) is defined as a supplier minimum and a user maximum.
10
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
Precautions for Use
Storage:
1. Before opening the package
The LEDs should be kept at a temperature lower than 40° C and relative humidity lower than 90%. The LEDs should be used within a
year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended.
2. After opening the package
The LEDs should be kept at temperature lower than 30° C and relative humidity lower than 60%. The LEDs should be soldered within
168 hours (7days) after opening the moisture proof package.
If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture proof package
within absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to
seal the moisture proof package again.
If the moisture absorbent material (silica gel) vapors or expires the expiration date, baking treatment should be performed by using
the following conditions : 60 °C for 20 hours.
The LEDs electrode and leadframe comprise a silver plated copper alloy. The silver surface may be affected by environments. Please
avoid conditions which may cause the LEDs to corrode or discolore. The corrosion or discoloration might lower solderability or affect
optical characteristics.
Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur.
Static Electricity:
1. The products are sensitive to static electricity, and care should be taken when handling them.
2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear a anti-electrostatic wristband or anti-electrostat-
ic gloves when handling the LEDs.
3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge volt-
age to the equipment that mounts the LEDs.
11
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
SST-10-Red Product Datasheet
History of Changes
Rev
01
Description of Change
Initial Release - Preliminary Specifications
06/10/2016
04/03/2017
02
Updated title in “Relative Output Flux vs. Junction Temperature”graph and address..
Corrected ordering information typo on page 2, dissipated power value on page 4 and other various minor
typos.
03
07/31/2017
12
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Court
•
www.luminus.com
PDS-002895 Rev 03
© 2017 Luminus Devices, Inc. - All Rights Reserved
•
Sunnyvale, CA 94086
相关型号：
©2020 ICPDF网 联系我们和版权申明