SST-90-W57S-F11-N3 [LUMINUS]
Extremely high optical output White LED: up to 4,000lm at 18A;型号: | SST-90-W57S-F11-N3 |
厂家: | Luminus |
描述: | Extremely high optical output White LED: up to 4,000lm at 18A |
文件: | 总16页 (文件大小:2047K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SST-90-W Product Datasheet
SST-90-W LEDs
Features:
• Extremely high optical output White LED: up to 4,000lm at 18A
• 5700K Daylight and 6500K Cool White color points available.
• High thermal conductivity package - junction to case thermal resistance of only
0.5 °C/W
Table of Contents
• Large, monolithic chip with uniform emitting area of 9 mm2
• Variable drive currents: less than 1 A through 18 A continuous waveform.
• Electrically isolated thermal path
Technology Overview . . . . . .2
Binning Structure . . . . . . . . . .3
Ordering Information . . . . . .5
Shipping and Labeling . . . . .6
Electrical Characteristics. . . .7
Product Characteristics. . . . .8
Mechanical Dimensions . . 11
Solder Profile . . . . . . . . . . . . 14
Tape and Reel Drawing . . . 15
History of Changes . . . . . . . 16
• Environmentally friendly: RoHS compliant
Applications
• Machine vision
• Emergency Vehicle Lighting
• Displays and Signage
• High- output strobing applications
• Beacons, obstruction Lighting
• Industrial Applications
• Portable Lighting
• High-output, directional transporta-
tion lighting
• Search Lights
• Work Lights
• Medical Lighting
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
1
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
Technology Overview
Luminus LEDs™ benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These
breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency.
Luminus Technology
Reliability
Luminus’ technology enables large area LED chips with uniform
brightness over the entire LED chip surface. The optical power
and brightness produced by these large monolithic chips
enable solutions which replace arc and halogen lamps where
arrays of traditional high power LEDs cannot.
Designed from the ground up, Luminus LEDs are one of the
most reliable light sources in the world today. Luminus LEDs
have passed a rigorous suite of environmental and mechanical
stress tests, including mechanical shock, vibration, temperature
cycling and humidity, and have been fully qualified for use in
extreme high power and high current applications. With very
low failure rates and median lifetimes that typically exceed
60,000 hours, Luminus LEDs are ready for even the most
demanding applications.
Packaging Technology
Thermal management is critical in high power LED applications.
With a thermal resistance from junction to case of
0.5º C/W. Luminus SST-90-W LEDs have the lowest thermal
resistance of any LED on the market. This allows the LED to be
driven at higher current densities while maintaining a low
junction temperature, thereby resulting in brighter solutions
and longer lifetimes.
Environmental Benefits
Luminus LEDs help reduce power consumption and the amount
of hazardous waste entering the environment. All LED products
manufactured by Luminus are RoHS compliant and free of
hazardous materials, including lead and mercury.
Understanding Luminus LED Test Specifications
Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products.
Testing Temperature
Luminus surface mount LEDs are typically tested with a 20mSec
input pulse and a junction temperature of 25ºC. Expected flux
values in real world operation can be extrapolated based on the
information contained within this product data sheet.
Large Operating Range
The tables on the following pages provide typical optical and
electrical characteristics. Since the LEDs can be operated over a
wide range of drive conditions (currents from less than 1.0 A to
18.0 A, and duty cycle from <1% to 100%), multiple drive
conditions are listed.
SST-90-W LEDs are production tested at 3.15 A. The values
shown at other 6.3 A and 9.0 A are for additional reference at
other possible drive conditions.
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
2
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
SST-90-W White Binning Structure
SST-90-W white LEDs are tested for luminous flux and chromaticity at a drive current of 3.15 A (350 mA/mm2) and placed into one of the
following luminous flux (FF) and chromaticity (WW) bins. Please note that single bins cannot be ordered. Refer to ordering information
to see the highest minimum bin orderable.
Flux Bins
Flux Bin (FF)
Minumum Flux (lm) @ 3.15A
Maximum Flux (lm) @ 3.15A
N2
N3
P
900
950
950
1,000
1060
1130
1200
1000
1060
1130
P2
P3
*Note: Luminus maintains a +/- 6% tolerance on flux measurements.
Chromaticity Bins
Luminus’Standard Chromaticity Bins: 1931 CIE Curve
0.380
0.355
0.330
0.305
0.280
5700
EH
BB Locus
J4
6500
H4
EF
G4
J3
H3
F4
DJ
G3
F3
DG
DE
DF
0.270
0.295
0.320
CIEx
0.345
0.370
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
3
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
The following tables describe the four chromaticity points that bound each chromaticity bin. Chromaticity bins are grouped together
based on the color temperature.
6500K Chromaticity Bins
5700K Chromaticity Bins
Bin Code
(WW)
Bin Code
(WW)
CIEx
CIEy
CIEx
CIEy
0.307
0.322
0.323
0.309
0.305
0.313
0.315
0.307
0.303
0.312
0.313
0.305
0.313
0.321
0.322
0.315
0.312
0.321
0.321
0.313
0.302
0.320
0.321
0.303
0.283
0.303
0.307
0.289
0.289
0.307
0.309
0.293
0.311
0.326
0.316
0.302
0.321
0.329
0.319
0.311
0.330
0.339
0.329
0.321
0.329
0.337
0.326
0.319
0.339
0.348
0.337
0.329
0.335
0.354
0.348
0.330
0.304
0.330
0.311
0.293
0.293
0.311
0.302
0.285
0.322
0.337
0.336
0.323
0.321
0.329
0.329
0.322
0.321
0.329
0.329
0.321
0.329
0.337
0.337
0.330
0.329
0.338
0.337
0.329
0.320
0.338
0.338
0.321
0.324
0.337
0.326
0.314
0.335
0.342
0.331
0.324
0.346
0.354
0.342
0.335
0.342
0.349
0.337
0.331
0.354
0.362
0.349
0.342
0.352
0.368
0.362
0.346
DG
F3*
F4*
G3*
G4*
EF
DJ
H3*
H4*
J3*
J4*
EH
DE
DF
*Sub-bins within ANSI defined quadrangles per ANSI C78.377-2008
Note : CIE Measurement uncertainty for white devices is in estimated to be +/- 0.01
Luminus Devices, Inc. • T 978.528.8000
175 New Boston Street
•
•
www.luminus.com
Woburn, MA 01801
4
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
SST-90-R Product Datasheet
Ordering Information
SS<X>
90
W<NN>S
<Z>11
<abnnn>
Product Family
LED Emission Area
Color
Package Configuration
Bin kit
F11: 10.0 mm x 11.0 mm -
Surface mount, shipped in
25 unit trays.
T11:surface mount, shipped
in tape and reel [see p15]
R11: Surface mount device
mounted on an aluminum
star board (15/tray)
SST: Surface mount device,
Encapsulated
W = White
NN: 57=5700k
65=6500k
Flux and Chromaticity bin kit
code - See available ordering
codes below
90: 9.0 mm2
SSR: Surface mount device
mounted on an aluminum
star board
S: Standard CRI
SST-90-W and SSR-90-W Bin Kit Order Codes
The following table describes the bin kit ordering codes for the SST-90-W and SSR-90-W. Each kit specifies a minimum flux and allowed
chromaticity bins. A maximum flux is not specified. Within each kit, Luminus may ship any part meeting or exceeding the minimum flux
specification as well as chromaticity specification but no specific mix of bins is guaranteed.
Luminous Flux
Color
Chromaticity Bins
Kit Number
Bin Kit Flux
Code
Min. Flux
F4, F3, G4, G3, EF, DG, DE, DF
F4, F3, G4, G3, EF, DG
F4, F3, G4, G3
N2100
N2101
N2102
N3100
N3101
N3102
N2
N3
900
White
W65S
F4, F3, G4, G3, EF, DG, DE, DF
F4, F3, G4, G3, EF, DG
F4, F3, G4, G3
6500K, Standard CRI (typ. 70)
950
F4, F3, G4, G3, EF, DG, DE, DF
H4, H3, J4, J3, EH, DJ
White
WDLS
6500K & 5700K
Standard CRI (typ. 70)
N2
N3
900
950
N2150
N3150
F4, F3, G4, G3, EF, DG, DE, DF
H4, H3, J4, J3, EH, DJ
H4, H3, J4, J3, EH, DJ
H4, H3, J4, J3
N2200
N2201
N3200
N3201
N2
N3
900
950
White
W57S
H4, H3, J4, J3, EH, DJ
H4, H3, J4, J3
5700K, Standard CRI (typ. 70)
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
5
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
Product Shipping & Labeling Information
All SST-90-W products are packaged and labeled with their respective bin as outlined in the tables and charts from pages 3 to 4. When
shipped, each package will only contain one flux and chromaticity bin. Note the exception: Tape and Reel packaging for SST-90-W65S,
SST-90-W57S, and SST-90-WDLS may contain multiple chromaticity bins but only a single flux bin.
Product Label Information:
•
•
•
•
Ordering part number (see page5) - Example: SST-90-W57S-F11-N2201
Box / Tray / Reel ID (Luminus Internal Use)
Quantity
Bin = FF - WW ( See pages 3 and 4 for definitions)
Luminus Devices, Inc. • T 978.528.8000
175 New Boston Street
•
•
www.luminus.com
Woburn, MA 01801
6
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
SST-90-W Product Datasheet
Electrical Characteristics1
Optical and Electrical Characteristics (TJ = 25 ºC)
Drive Condition2
3.15 A
9.0 A
Typical Values at
Parameter
Symbol
Values at Test Currents
Unit
Indicated Current3
j
Current Density
0.35
2.5
1.0
A/mm2
VF, min
VF, typ
VF, max
V
V
V
Forward Voltage
3.25
3.9
3.87
Common Characteristics
Parameter
Symbol
Values
Unit
2 θ1/2
Viewing Angle (Typical)
Emitting Area
110
9.0
°C
mm2
Emitting Area Dimensions
Forward Voltage Temperature Coefficient
3 x 3
-2.45
mm×mm
mV/ºC
Absolute Maximum Ratings
Parameter
Symbol
Values
0.2
Unit
A
Minimum Drive Current4
Maximum Current3 (CW)
18
A
Absolute Maximum Surge Current
25 ms, D ≤ 0.1, Tc ≤ 40 C
27
A
Maximum Reverse Current
Not Designed for Reverse Operation
Maximum Junction Temperature6
Tj-max
150
ºC
ºC
Storage Temperature Range
-40/+100
Note 1: SST-90-W devices can be driven at currents ranging from <1A to 18A and at duty cycles ranging from <1% to 100%. Drive current and duty
cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements.
Note 2: Unless otherwise noted, values listed are typical.
Note 3: Sustained operation at absolute maximum currents will result in a reduction of device lifetime. In pulsed operation, rise time from 10-90% of
forward current should be larger than 0.5 microseconds. Lifetime dependent on LED junction temperature . Thermal calculations based on
input power and thermal management system should be performed to ensure Tj is maintained below Tjmax rating or life will be reduced. Refer
to APN-001522 for further information.
Note 4: Special design considerations must be observed for operation under 1A. Please contact Luminus for further information.
Note 5: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the
eye.
Note 6: Sustained operation at Absolute Maximum Operating Junction Temperature (Tjmax) will result in significantly reduced device life time. Please
refer to AN1522 for more information
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
7
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
Relative Output Flux vs. Forward Current1
Relative Output Flux vs. Tj
Forward Current vs. Forward Voltage
Forward Voltage Shift vs. Tj
Chromaticity Coordinates Shift vs. If
Chromaticity Coordinates Shift vs. Tj
Note 1: Yellow squares indicate devices production test point.
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
8
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
B50 projected Median Lifetime 1
B10 Projected median Lifetime1
70,000
60,000
50,000
40,000
30,000
20,000
10,000
0
70,000
60,000
50,000
40,000
30,000
20,000
10,000
0
I = 9.0A
I = 13.5A
I = 18.0A
I = 9.0A
I = 13.5A
I = 18.0A
70
80
90
100
110
120
130
140
150
90
100
110
120
130
140
150
Junction Temperature (°C)
Junction Temperature (°C)
Typical Relative Spectral Power2
Current Derating Curve
Note 1: B10 and B50 median lifetimes refers to 90% and 50% brightness maintenance respectively refer to AN-1522 Application note for more
information
Note 2: Typical spectrum at current density of 0.35 A/mm2 in continuous operation.
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
9
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
Typical Angular Radiation Pattern
Thermal Resistance
Typical Thermal Resistance
Dome
Tj
Die Junction
1
0.50 ºC/W
1.20 ºC/W
1.40 ºC/W
Rj-c
Tc
Tb
Window Frame
Ceramic Substrate
1
Rj-b
Aluminum Core Board
Heat Sink
2
Rj-hs
Ths
Note 1: Thermal resistance values are based on
FEA model results correlated to
measured Rθj-hs data.
T
deꢀnition = 3 mm from core-board
hs
Note 2: Thermal resistance is measured using a
SAC305 solder, a Bergquist Al-clad
MCPCB, and eGraf 1205 thermal
interface material.
Luminus Devices, Inc. • T 978.528.8000
175 New Boston Street
•
•
www.luminus.com
Woburn, MA 01801
10
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
SST-90-W Product Datasheet
Note: Luminus currently ships both an overmolded and a glass lens-based version of the SST-90-W package that are functionally compatible
Mechanical Dimensions – SST-90-W Over-Molded
DIMENSIONS IN MILLIMETERS
.15
+
10.00
NOTCH INDICATES
ANODE (+)
.00
5.17±.23
E
S
8.00
+
.15
.00
11.00
9.9
5.1 7.1
3.0
DIE EMITTING
AREA
1.4
4.27
E
3X 9.0
TOP OF DIE EMITTING
AREA TO TOP OF
OVERMOLDED LENS
3.0
DIE EMITTING
AREA
SECTION E-E
9.9
1.4
5.1 7.1
3X 9.0
RECOMMENDED
SOLDER PAD LAYOUT
For detailed drawing please refer to DWG-002519 document
Luminus Devices, Inc. • T 978.528.8000
1100 Technology Park Drive
•
•
www.luminus.com
Billerica, MA 01821
11
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
SST-90-W Product Datasheet
Mechanical Dimensions – SST-90-W with metal frame and glass lens (Original Design)
For detailed drawing please refer to DWG-001359 document
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
12
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
Mechanical Dimensions – SST-90-W Star Board
7.0
60°
4.0
16.1
SOLDER PADS
19.0
R1.6
TYP
60°
3.0
TYP
1.4
TYP
19.9
TYP
7.1
ANODE PADS
CATHODE PADS
Note 1: Recommended mounting screw: M3 or #4
Note 2: All dimensions in millimeters
Note 3: All anode pads on board are interconnected. All cathode pads on board are interconnected
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
13
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
Solder Profile
SAC 305 Reflow Profile Window For Low Density Boards
250
225
200
175
150
125
100
75
50
25
0
0
30
60
90
120
150
Time (sec)
180
210
240
270
300
Lead free solder guideline for low density boards
Solder Profile Stage
Profile length, Ambient to Peak
Lead-Free Solder
2.75 - 3.5 minutes
217 ºC
Lead-based Solder
2.75 - 3.5 minutes
183 ºC
Time Maintained Above: Temperature
Time Maintained Above: Time
Cooldown Rate
30 - 60 seconds
≤4º C/sec
30 - 60 seconds
≤4º C/sec
Cooldown Duration
45 15 sec
45 15 sec
Note 1: Temperatures are taken and monitored at the component copper layer.
Note 2: Optimum profile may differ due to oven type, circuit board or assembly layout.
Note 3: Recommended lead free, no-clean solder: AIM NC254-SAC305.
Note 4: Refer to APN-001473 soldering and handling application note for additional solder profiles and details.
Note 5: MSL- Level 2A (Glass Lens); MSL Level 1 (Over Molded Design)
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
14
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
Tape and Reel Drawing
',0(16,216ꢀ$5(ꢀ,1ꢀPPꢄꢀꢆ,1&+ꢉ
$
LEADER
75$,/(5
LOADED POCKETS
(100 PCS)
TRAILER
Min.208mm(13pockets)
Min. 464 mm (29 pockets)
%
&
'
$
(
'(7$,/ꢀ$ꢀ
6&$/(ꢀꢁꢀꢂꢀꢁ
:
25,(17$7,21ꢀ2)ꢀ'(9,&(
,16,'(ꢀ32&.(7
)
815((/,1*ꢀ',5(&7,21
7$3(ꢀ',0(16,216
:
$
%
&
'
(
)
6.0 (.236)
(.067)
ꢊꢃꢄꢂꢀꢀꢀꢀꢆꢄꢈꢃꢋꢉ
ꢇꢄꢋꢀꢀꢆꢄꢂꢋꢈꢉ ꢃꢄꢂꢀꢀꢀꢀꢆꢄꢇꢋꢌꢉ
ꢇꢄꢌꢀꢀꢇꢇꢄꢋꢀꢀꢀꢆꢄꢃꢋꢁꢉ ꢇꢍꢄꢂꢀꢀꢀꢀꢆꢄꢍꢁꢂꢉ
815((/,1*ꢀ',5(&7,21
/($'(5ꢀ(1'
:ꢇ
32&.(76
$
%
1
1
+
'(7$,/ꢀ%ꢀ
6&$/(ꢀꢃꢀꢂꢀꢄ
%
:ꢊ
5((/ꢀ',0(16,216
$
%
1
+
:
ꢇ
:
ꢊ
1
Ø 178 (7)
27 (1.063)
59 (2.323)
ꢊꢋꢀꢀꢀꢆꢄꢈꢅꢃꢉ
ꢇꢁꢄꢂꢀꢀꢀꢆꢄꢋꢇꢊꢉ
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
15
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
SST-90-W Product Datasheet
History of Changes
Rev
Date
Description of Change
•
•
•
•
•
•
•
Removed SST-90-G and SST-90-B information (discontinued)
Removed SST-90-R information – it will be documented in a new dedicated datasheet (PDS-002760)
Merged binning and labelling document with datasheet
Updated datasheet information to reflect enhancements from the over-molded design:
Reduced thermal resistance
Increase maximum current
Updated all parametric curves to reflect latest performance and added additional curves not docu-
mented in earlier revisions
14
09/30/2015
•
•
•
•
Updated spectra and angular distribution to reflect latest characterization data
Added note on Tape and Reel drawing reflecting new reel size of 100 units for overmold design
Added history of change section
Editorial fixes
•
•
Updated tape and reel information to reflect new 7”reel size (100 units)
Editorial fixes page 7 – notes and absolute maximum surge current
15
11/16/2015
The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus
Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or
information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the
product for any particular application or as any other form of warranty. Luminus Devices’product warranties are limited to only such warranties as
accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No
information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices
may have in such information.
This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100;
7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and
other countries.
Luminus Devices, Inc. • T 978.528.8000
•
www.luminus.com
16
PDS-001342 Rev 15 © 2015 Luminus Devices, Inc. - All Rights Reserved
175 New Boston Street
• Woburn, MA 01801
相关型号:
©2020 ICPDF网 联系我们和版权申明