XBT-1313-UV-A130-AB280-00 [LUMINUS]
UVC LED with emission wavelength between 280 nm and 286 nm;
| 型号： | XBT-1313-UV-A130-AB280-00 |
| 厂家： | 
Luminus |
| 描述： | UVC LED with emission wavelength between 280 nm and 286 nm |
| 文件： | 总11页 (文件大小：1502K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
XBT-1313-UV
Product Datasheet
XBT-1313-UV
Surface Mount
UVC LED
Features:
• UVC LED with emission wavelength between 280 nm and 286 nm
• Ultra-compact form factor: 1.3 mm x 1.3 mm x 0.85 mm package
• Wide viewing angle >120 deg
Table of Contents
• High reliability package with ESD protection
• Standard SMD Process
Binning and Ordering . . . . . .
Information. . . . . . . . . . . . . . . .2
• RoHS and REACH compliant
Optical and Electrical
Characteristics . . . . . . . . . . . . .4
Mechanical Dimensions . . . .7
Soldering Profile . . . . . . . . . . .8
Product Shipping & Labeling
Information. . . . . . . . . . . . . . . .9
Applications
Precautions for Use. . . . . . . 10
History of Changes . . . . . . . 11
•
•
•
•
•
Water/ Air/ Surface Disinfection
Florescence analyzer
Food & Pharmaceutical Processing
Horticulture
Medical Spectroscopy
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
1145 Sonora Court Sunnyvale, CA 94086 USA
1
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
XBT-1313-UV Binning Structure
XBT-1313 LEDs are tested for radiometric flux and chromaticity at a drive current of 20 mA, 40 ms single pulse and placed into one of the
following radiometric flux (FF) and wavelength (WWW) bins
Radiometric Flux Bins
Flux Bin (FF)
Minimum Flux (mW)
Maximum Flux (mW)
1
2
3
4
5
2
3
4
5
6
AA
AB
AC
AD
AE
Wavelength Bins
Wavelength Bin (WWW)
Minimum Wavelength (nm)
Maximum Wavelength (nm)
280
280
286
Note 1: Luminus maintains a +/- 6% tolerance on flux measurements and +/- 1 nm on wavelength measurements.
Note 2: Individual bins are not orderable. Please refer to product ordering information on page 3 for a list of ordering part numbers.
Luminus Devices, Inc. • T 408.708.7000
•
www.luminus.com
2
1145 Sonora Ct.
• Sunnyvale, CA 94086
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
Part Number Nomenclature
XBT
1313
UV
<A###>
<FFWWW-##>
Product Family
Package Type
Spectrum
Ultraviolet
Package Configuration
Bin kit
Flux and Wavelength
XBT: UVC Surface Mount
Package
1313 : 1.3 mm x 1.3 mm
A130 : 130 degree lens bin kit code - See bin kit
order codes table
Ordering Part Numbers
The table below lists ordering part numbers available for XBT-1313-UV LEDs. The part number includes a bin kit, a group of flux and
wavelength bins described in page 2, that are shippable for a given ordering part number . Individual flux or wavelength bins are not
orderable . Flux bin listed is minimum bin shipped - higher bins may be included at Luminus’discretion.
Radiometric Flux
Wavelength Range
280
Wavelength Bins
Ordering Part Number
Bin Kit Flux Code
Min. Flux
1
2
AA
AB
XBT-1313-UV-A130-AA280-00
XBT-1313-UV-A130-AB280-00
280
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
3
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
Optical and Electrical Characteristics
Parameter
Symbol
If
Typical
20
Unit
mA
mW
V
Test Current
Output Radiant Power
Minimum Forward Voltage
Typical Forward Voltage
Maximum Forward Voltage
FWHM
Popt
2.6
Vf-min
Vf-typ
Vf-max
Δλ
4.0
5.2
V
7.0
V
10
nm
°
Viewing Angle
2θ1/2
Rth
150
30
Thermal Resistance (junction-solder point)
°C/W
Absolute Maximum Ratings
Parameter
Symbol
If-max
Value
40
Unit
mA
° C
Forward Current
Junction Temperature
Tj
65
Note 1: Ratings are based on operation at a constant junction temperature of Tj = 25 ° C. Test condition is a single 40 ms pulse at 25 ° C.
Note 2: Luminus XBT-1313 LEDs are designed for operation up to an absolute maximum forward drive current as specified above. Product lifetime data is
specified at typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared
to typical forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the current vs. junction temperature
derating curves for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds.
Note 3: Caution must be taken not to stare at the radiation emitted from these UV LEDs.
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
4
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
Optical & Electrical Characteristics
Forward Voltage vs Forward Current
Forward Voltage Shift vs. Junction Temperature
ΔVf = Vf(T) - Vf(25°C), 40 ms pulse, If = 20 mA
j
Peak Wavelength Shift vs. Forward Current
Peak Wavelength Shift vs. Junction Temperature
λp= λp(If ) - λp (20 mA), 40 ms pulse, T = 25°C
λp= λp(T) - λp (25°C), 40 ms pulse, If =20 mA
j
j
Relative Power vs. Forward Current
φ/φ(20 mA) , 40 ms pulse, T = 25°C
j
Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com
1145 Sonora Court, Sunnyvale, CA 94086 USA
5
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
Typical Spectrum
Radiation Pattern
Note 1 : Typical spectrum at 20 mA drive current.
Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com
1145 Sonora Court, Sunnyvale, CA 94086 USA
6
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
Mechanical Dimensions
Recommended Solder Pad & Stencil Pattern
Solder Pad
1.4mm x 0.6mm
1.0mm x 0.4mm
Stencil Pattern
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
7
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
Soldering Profile
Profile Setting
Average Ramp-up Rate (Tsmax, Tp)
Preheat Temperature Min (Tsmin
Preheat Temperature Max (Tsmax
Pb-Free Profile
1 °C/sec
100-150 °C
180-200 °C
60-120 sec
217 °C
)
)
Preheat Time (tsmin to tsmax
)
Liquidus Temperature (TL)
Time Maintained Above TL (tL)
50-80 sec
260 °C
Peak / Classification Temperature (TP)
Time within 5°C of Actual Peak Temp (tP)
Ramp-Down Rate
Max 10 sec
2-3 °C /sec
4 mins
25°C to Peak Temperature time
Luminus recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations.
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
8
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
Product Shipping & Labeling Information
All XBT-1313 products are packaged and labeled with their respective bin as outlined in the tables on pages 2 & 3. Each reel will only
contain one flux and one wavelength bin
XBT-1313-UV Label Information
Luminus Devices, Inc. • T 408.708.7000
1145 Sonora Ct.
•
www.luminus.com
9
•
Sunnyvale, CA 94086
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
Precautions for storage, handling and use of UV LED components
1. UV Light
XBT-1313-UV LEDs are short wavelength, deep UV LEDs. During operation, the LED emits high intensity UVC radiation, which is harm-
ful to skin and eyes. UV light is also hazardous to skin and may cause cancer. Avoid exposure to deep UV light when LED is operational.
Precautions must be taken to avoid looking directly at the UV light without the use of UV light protective glasses. Do not look directly
at the front or at the LED’s lens when LED is operational.
2. Static Electricity (ESD)
While XBT 1313 LEDs have built-in protection,they are sensitive to ESD (Electrostatic Discharge). Static electricity and surge voltages
seriously damage UV LEDs and can result in complete failure of the device. Precautions must be taken against ESD when handling or
operating these devices.
3. Operating Conditions
In order to ensure the correct functioning of these LEDs, compliance to maximum allowed specifications is important. UV LEDs are par-
ticularly sensitive to drive currents that exceed the max operating specifications and may be damaged by such drive curents. The use
of current regulated drive circuits is strongly recommended when operating these devices. Customers should also provide adequate
thermal management to ensure LEDs do not exceed maximum recommended temperatures. Operating LEDs at temperatures in ex-
cess of specification will result in damage and possibly complete failure of the device.
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
10
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
XBT-1313-UV
Product Datasheet
History of Changes
Rev
01
Description of Change
Initial Release
6/20/2019
02
11/04/2019
Tape and Reel drawing
The products, their specifications and other information appearing in this document are subject to change by Luminus Devices with-
out notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from
the application or use of the product or information contained herein. None of the information provided herein should be consid-
ered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty.
Luminus Devices’product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such
products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may
be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information.
Luminus Devices, Inc. • T 408.708.7000 www.luminus.com
11
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-002977 Rev 02 © 2019 Luminus Devices, Inc. - All Rights Reserved
相关型号：
XBT-3535-UV
Surface Mount UVC LEDWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
LUMINUS
XBT-3535-UV-A130-CC275-00
Surface Mount UVC LEDWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
LUMINUS
XBT-3535-UV-A130-CC275-01
Surface Mount UVC LEDWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
LUMINUS
XBT-3535-UV-A130-CC280-01
Surface Mount UVC LEDWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
LUMINUS
XBT-3535-UV-A130-CD275-00
Surface Mount UVC LEDWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
LUMINUS
XBT-3535-UV-A130-CD275-01
Surface Mount UVC LEDWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
LUMINUS
XBT-3535-UV-A130-CD280-01
Surface Mount UVC LEDWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
LUMINUS
XBTF011110
＂HMI TERMINAL5.7＂＂ MONO KEYPAD＂Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
XBTF032110
＂HMI TERMINAL 5.7＂＂COL TOUCHSCREEN＂Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
XBTF034110
＂HMI TERMINAL 10.4＂＂ COL TOUCHSCREEN＂Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
XBTGT1105
advanced touchscreen panel - 640 x 480 pixels VGA - 10.4" - TFT LCD - 24 V DCWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SCHNEIDER
XBTGT1135
advanced touchscreen panel - 640 x 480 pixels VGA - 10.4" - TFT LCD - 24 V DCWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SCHNEIDER
©2020 ICPDF网 联系我们和版权申明