LT6014AIDD#TR [Linear]
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: DFN; Pins: 8; Temperature Range: -40°C to 85°C;型号: | LT6014AIDD#TR |
厂家: | Linear |
描述: | LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: DFN; Pins: 8; Temperature Range: -40°C to 85°C 放大器 光电二极管 |
文件: | 总16页 (文件大小:325K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LT6013/LT6014
Single/Dual 145µA,
9.5nV/√Hz, A ≥5, Rail-to-Rail
V
Output Precision Op Amps
U
FEATURES
DESCRIPTIO
TheLT®6013andLT6014opampscombinelownoiseand
high precision input performance with low power con-
sumption and rail-to-rail output swing. The amplifiers are
stable in a gain of 5 or more and feature greatly improved
CMRR and PSRR versus frequency compared to other
precision op amps.
■
35µV Maximum Offset Voltage (LT6013A)
Low 1/f Noise: 200nVP-P (0.1Hz to 10Hz)
■
40nVRMS (0.1Hz to 10Hz)
■
Low White Noise: 9.5nV/√Hz (1kHz)
■
Rail-to-Rail Output Swing
■
145µA Supply Current per Amplifier
■
250pA Maximum Input Bias Current (LT6013A)
Input offset voltage is factory-trimmed to less than 35µV.
The low drift and excellent long-term stability ensure a
high accuracy over temperature and time. The 250pA
maximum input bias current and 120dB minimum voltage
gain further maintain this precision over operating
conditions.
■
AV ≥5 Stable; Up to 500pF CLOAD
■
0.2V/µs Slew Rate
■
1.4MHz Gain Bandwidth Product
■
120dB Minimum Voltage Gain, VS = ±15V
■
0.8µV/°C Maximum VOS Drift
■
2.7V to ±18V Supply Voltage Operation
■
■
The LT6013 and LT6014 operate from any supply voltage
from 2.7V to 36V and draw only 145µA of supply current
per amplifier on a 5V supply. The output swings to within
40mV of either supply rail, making the amplifiers very
useful for low voltage single supply operation.
Operating Temperature Range: –40°C to 85°C
Available in SO-8 and Space Saving 3mm × 3mm
DFN Packages
U
APPLICATIO S
■
The amplifiers are fully specified at 5V and ±15V supplies
and from –40°C to 85°C. The single LT6013 and dual
LT6014 are both available in SO-8 and space saving
3mm × 3mm DFN packages. For unity gain stable ver-
sions, refer to the LT6010 and LT6011 data sheets.
Thermocouple Amplifiers
■
Precision Photodiode Amplifiers
■
Instrumentation Amplifiers
■
Battery-Powered Precision Systems
■
Low-Voltage Precision Systems
■
, LTC and LT are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
Micro-Power Sensor Interface
U
TYPICAL APPLICATIO
Gain of 10 Single Ended to Differential Converter
LT6013/LT6014 0.1Hz to 10Hz Voltage Noise
+
V
V
= 5V, 0V
= 25°C
S
A
T
+
EQUIVALENT RMS VOLTAGE = 40nV
V
IN
RMS
1/2 LT6014
5 • V
IN
–
2k
2k
8.06k
10k
–
1/2 LT6014
–5 • V
IN
0
1
2
3
4
5
6
7
8
9
10
+
TIME (SEC)
–
V
60134 TA01a
60134 TA01b
60134fb
1
LT6013/LT6014
W W
U W
ABSOLUTE AXI U RATI GS (Note 1)
Total Supply Voltage (V+ to V–) .............................. 40V
Differential Input Voltage (Note 2) .......................... 10V
Input Voltage .................................................... V+ to V–
Input Current (Note 2) ....................................... ±10mA
Output Short-Circuit Duration (Note 3)........... Indefinite
Operating Temperature Range (Note 4) .. –40°C to 85°C
Specified Temperature Range (Note 5)... –40°C to 85°C
Maximum Junction Temperature
DD Package ..................................................... 125°C
S8 Package...................................................... 150°C
Storage Temperature Range
DD Package ..................................... –65°C to 125°C
S8 Package...................................... –65°C to 150°C
Lead Temperature (Soldering, 10 sec).................. 300°C
U W
U
PACKAGE/ORDER I FOR ATIO
ORDER PART
NUMBER
ORDER PART
NUMBER
TOP VIEW
TOP VIEW
LT6013CDD
LT6013IDD
LT6013ACDD
LT6013AIDD
LT6013CS8
*DNC
–IN
1
2
3
4
8
7
6
5
*DNC
*DNC
–IN
1
2
3
4
8
7
6
5
*DNC
LT6013IS8
+
V
–
+
+
V
–
+
LT6013ACS8
LT6013AIS8
+IN
OUT
NC
+IN
OUT
NC
–
V
–
V
S8 PART MARKING
DD PART MARKING*
LBHC
DD PACKAGE
S8 PACKAGE
8-LEAD (3mm × 3mm) PLASTIC DFN
8-LEAD PLASTIC SO
6013
TJMAX = 125°C, θJA = 160°C/W
UNDERSIDE METAL CONNECTED TO V–
(PCB CONNECTION OPTIONAL)
TJMAX = 150°C, θJA = 190°C/W
6013I
6013A
6013AI
*Do Not Connect
*Do Not Connect
ORDER PART
NUMBER
ORDER PART
NUMBER
TOP VIEW
TOP VIEW
LT6014CDD
LT6014IDD
LT6014ACDD
LT6014AIDD
LT6014CS8
LT6014IS8
LT6014ACS8
LT6014AIS8
+
OUT A
–IN A
+IN A
1
2
3
4
8
7
6
5
V
+
OUT A
–IN A
+IN A
1
2
3
4
8
7
6
5
V
OUT B
–IN B
+IN B
A
OUT B
–IN B
+IN B
A
B
–
V
B
–
V
DD PART MARKING*
LBCB
S8 PART MARKING
DD PACKAGE
S8 PACKAGE
8-LEAD PLASTIC SO
TJMAX = 150°C, θJA = 190°C/W
8-LEAD (3mm × 3mm) PLASTIC DFN
6014
TJMAX = 125°C, θJA = 160°C/W
UNDERSIDE METAL CONNECTED TO V–
(PCB CONNECTION OPTIONAL)
6014I
6014A
6014AI
*Temperature and electrical grades are identified by a label on the shipping container.
Consult LTC Marketing for parts specified with wider operating temperature ranges.
60134fb
2
LT6013/LT6014
ELECTRICAL CHARACTERISTICS
The ● denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VS = 5V, 0V; VCM = 2.5V; RL to 0V; unless otherwise specified. (Note 5)
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
V
OS
Input Offset Voltage (Note 8)
LT6013AS8
10
35
60
75
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013S8, LT6014AS8
20
20
20
30
30
60
85
110
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013ADD
60
110
150
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014S8
75
100
125
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013DD, LT6014ADD
85
135
170
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014DD
125
175
210
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
∆V /∆T
Input Offset Voltage Drift (Note 6)
Input Offset Current (Note 8)
S8 Packages
DD Packages
●
●
0.2
0.2
0.8
1.4
µV/°C
µV/°C
OS
I
LT6013AS8, LT6013ADD
100
100
150
100
100
150
250
500
600
pA
pA
pA
OS
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014AS8, LT6014ADD
500
600
700
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013/LT6014 (Standard grades)
800
1000
1200
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
I
Input Bias Current (Note 8)
LT6013AS8, LT6013ADD
±250
±500
±600
pA
pA
pA
B
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013S8, LT6013DD, LT6014AS8, LT6014ADD
±400
±600
±800
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014S8, LT6014DD
±800
±1000
±1200
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
e
Input Noise Voltage Density
f = 1kHz, LT6013/LT6014
f = 1kHz, LT6013A/LT6014A
9.5
9.5
nV/√Hz
nV/√Hz
n
13
Input Noise Voltage (Low Frequency) Bandwidth = 0.01Hz to 1Hz
Bandwidth = 0.1Hz to 10Hz
200
50
nV
P-P
nV
RMS
200
40
nV
P-P
nV
RMS
60134fb
3
LT6013/LT6014
ELECTRICAL CHARACTERISTICS
The ● denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VS = 5V, 0V; VCM = 2.5V; RL to 0V; unless otherwise specified. (Note 5)
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
i
Input Noise Current Density
f = 1kHz
0.15
pA/√Hz
n
Input Noise Current (Low Frequency) Bandwidth = 0.01Hz to 1Hz
7
1.3
pA
P-P
pA
RMS
Bandwidth = 0.1Hz to 10Hz
5
0.4
pA
P-P
pA
RMS
R
Input Resistance
Input Capacitance
Common Mode, V = 1V to 3.8V
Differential
120
20
GΩ
MΩ
IN
CM
C
V
4
pF
IN
Input Voltage Range (Positive)
Input Voltage Range (Negative)
Guaranteed by CMRR
Guaranteed by CMRR
●
●
3.8
4
0.7
V
V
CM
1
CMRR
Common Mode Rejection Ratio
Minimum Supply Voltage
V
= 1V to 3.8V
●
●
●
107
135
2.4
dB
V
CM
Guaranteed by PSRR
2.7
PSRR
Power Supply Rejection Ratio
Large-Signal Voltage Gain
V = 2.7V to 36V, V = 1/2V
S
112
135
dB
S
CM
A
V
R = 10k, V = 1V to 4V
OUT
R = 2k, V
●
●
300
250
2000
2000
V/mV
V/mV
VOL
OUT
L
= 1V to 4V
L
OUT
Channel Separation
V
= 1V to 4V, LT6014
●
●
●
●
●
●
●
110
140
35
dB
OUT
Maximum Output Swing
No Load, 50mV Overdrive
55
65
mV
mV
+
(Positive, Referred to V )
I
= 1mA, 50mV Overdrive
120
40
170
220
mV
mV
SOURCE
Maximum Output Swing
(Negative, Referred to 0V)
No Load, 50mV Overdrive
55
65
mV
mV
I
= 1mA, 50mV Overdrive
= 0V, 1V Overdrive, Source
= 5V, –1V Overdrive, Sink
150
14
225
275
mV
mV
SINK
I
Output Short-Circuit Current (Note 3) V
V
8
4
mA
mA
SC
OUT
OUT
8
4
21
mA
mA
SR
Slew Rate
A = –10, R = 50k, R = 5k
0.15
0.12
0.1
0.2
V/µs
V/µs
V/µs
V
F
G
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
GBW
Gain Bandwidth Product
f = 10kHz
1
0.9
1.4
MHz
MHz
●
t
Settling Time
A = –4, 0.01%, V = 1.5V to 3.5V
OUT
20
1
µs
µs
s
V
t , t
Rise Time, Fall Time
A = 5, 10% to 90%, 0.1V Step
V
r
f
60134fb
4
LT6013/LT6014
ELECTRICAL CHARACTERISTICS
The ● denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VS = 5V, 0V; VCM = 2.5V; RL to 0V; unless otherwise specified. (Note 5)
SYMBOL
∆V
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
Offset Voltage Match (Note 7)
LT6014AS8
50
120
170
220
µV
µV
µV
OS
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014ADD
50
50
170
270
340
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014S8
150
200
250
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014DD
60
250
350
420
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
∆I
Input Bias Current Match (Note 7)
LT6014AS8, LT6014ADD
200
300
800
1200
1400
pA
pA
pA
B
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014S8, LT6014DD
1600
2000
2400
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
∆CMRR
∆PSRR
Common Mode Rejection Ratio
Match (Note 7)
LT6014
●
101
106
135
135
145
dB
Power Supply Rejection Ratio
Match (Note 7)
LT6014
●
dB
I
Supply Current
per Amplifier
165
210
230
µA
µA
µA
S
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
The ● denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C.
VS = ±15V, VCM = 0V, RL to 0V, unless otherwise specified. (Note 5)
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
V
Input Offset Voltage (Note 8)
LT6013AS8
20
60
80
110
µV
µV
µV
OS
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013S8
25
25
30
35
35
40
85
110
135
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013ADD
85
135
170
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013DD, LT6014AS8
135
160
185
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014S8
150
175
200
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014ADD
160
210
225
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014DD
200
250
275
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
60134fb
5
LT6013/LT6014
ELECTRICAL CHARACTERISTICS
The ● denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VS = ±15V, VCM = 0V, RL to 0V, unless otherwise specified. (Note 5)
SYMBOL
∆V /∆T
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
Input Offset Voltage Drift (Note 6)
S8 Packages
DD Packages
●
●
0.2
0.2
0.8
1.2
µV/°C
µV/°C
OS
I
Input Offset Current (Note 8)
Input Bias Current (Note 8)
Input Noise Voltage Density
LT6013AS8, LT6013ADD
100
100
150
100
100
150
250
500
600
pA
pA
pA
OS
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014AS8, LT6014ADD
500
600
700
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013/LT6014 (Standard grades)
800
1000
1200
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
I
LT6013AS8, LT6013ADD
±250
±500
±600
pA
pA
pA
B
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6013S8, LT6013DD, LT6014AS8, LT6014ADD
±400
±600
±800
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014S8, LT6014DD
±800
±1000
±1200
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
e
f = 1kHz, LT6013/LT6014
f = 1kHz, LT6013A/LT6014A
9.5
9.5
nV/√Hz
nV/√Hz
n
13
Input Noise Voltage (Low Frequency) Bandwidth = 0.01Hz to 1Hz
200
50
nV
P-P
RMS
nV
Bandwidth = 0.1Hz to 10Hz
200
40
nV
RMS
P-P
nV
i
n
Input Noise Current Density
f = 1kHz
0.15
pA/√Hz
pA
Input Noise Current (Low Frequency) Bandwidth = 0.01Hz to 1Hz
7
1.3
P-P
pA
RMS
Bandwidth = 0.1Hz to 10Hz
5
0.4
pA
RMS
P-P
pA
R
IN
Input Resistance
Common Mode, V = ±13.5V
400
20
GΩ
MΩ
CM
Differential
C
V
Input Capacitance
4
pF
V
IN
Input Voltage Range
Guaranteed by CMRR
●
±13.5
±14
CM
CMRR
Common Mode Rejection Ratio
V
= –13.5V to 13.5V
115
112
135
135
dB
dB
CM
●
●
●
Minimum Supply Voltage
Power Supply Rejection Ratio
Large-Signal Voltage Gain
Guaranteed by PSRR
V = ±1.35V to ±18V
±1.2
135
±1.35
V
PSRR
112
dB
S
A
VOL
R = 10k, V = –13.5V to 13.5V
OUT
1000
600
2000
V/mV
V/mV
L
●
R = 5k, V
= –13.5V to 13.5V
500
300
1500
140
V/mV
V/mV
L
OUT
●
●
Channel Separation
V
OUT
= –13.5V to 13.5V, LT6014
120
dB
60134fb
6
LT6013/LT6014
ELECTRICAL CHARACTERISTICS
The ● denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VS = ±15V, VCM = 0V, RL to 0V, unless otherwise specified. (Note 5)
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
V
Maximum Output Swing
(Positive, Referred to V )
No Load, 50mV Overdrive
45
80
100
mV
mV
OUT
+
●
●
●
●
●
●
I
= 1mA, 50mV Overdrive
140
45
195
240
mV
mV
SOURCE
Maximum Output Swing
No Load, 50mV Overdrive
80
100
mV
mV
–
(Negative, Referred to V )
I
= 1mA, 50mV Overdrive
= 0V, 1V Overdrive (Source)
= 0V, –1V Overdrive (Sink)
150
15
250
300
mV
mV
SINK
I
Output Short-Circuit Current
(Note 3)
V
V
8
5
mA
mA
SC
OUT
OUT
8
5
20
mA
mA
SR
Slew Rate
A = –10, R = 50k, R = 5k
0.15
0.12
0.1
0.2
V/µs
V/µs
V/µs
V
F
G
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
GBW
Gain Bandwidth Product
f = 10kHz
1.1
1
1.6
MHz
MHz
●
t
Settling Time
A = –4, 0.01%, V = 0V to 10V
OUT
40
0.9
50
µs
µs
s
V
t , t
Rise Time, Fall Time
Offset Voltage Match (Note 7)
A = 5, 10% to 90%, 0.1V Step
V
r
f
∆V
LT6014AS8
270
320
370
µV
µV
µV
OS
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014ADD
50
70
320
420
450
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014S8
300
350
400
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014DD
80
400
500
550
µV
µV
µV
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
∆I
Input Bias Current Match (Note 7)
LT6014AS8, LT6014ADD
200
300
800
1200
1400
pA
pA
pA
B
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
LT6014S8, LT6014DD
1600
2000
2400
pA
pA
pA
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
∆CMRR
∆PSRR
Common Mode Rejection Ratio
Match (Note 7)
LT6014
●
109
106
135
135
200
dB
Power Supply Rejection Ratio
Match (Note 7)
LT6014
●
dB
I
Supply Current
per Amplifier
250
290
310
µA
µA
µA
S
T = 0°C to 70°C
●
●
A
T = –40°C to 85°C
A
60134fb
7
LT6013/LT6014
ELECTRICAL CHARACTERISTICS
Note 1: Absolute Maximum Ratings are those beyond which the life of the
Note 6: This parameter is not 100% tested.
device may be impaired.
Note 7: Matching parameters are the difference between the two
amplifiers. ∆CMRR and ∆PSRR are defined as follows: (1) CMRR and
PSRR are measured in µV/V for the individual amplifiers. (2) The
difference between matching amplifiers is calculated in µV/V. (3) The
result is converted to dB.
Note 2: The inputs are protected by back-to-back diodes and internal
series resistors. If the differential input voltage exceeds 10V, the input
current must be limited to less than 10mA.
Note 3: A heat sink may be required to keep the junction temperature
below absolute maximum ratings.
Note 4: The LT6013C/LT6014C and LT6013I/LT6014I are guaranteed
functional over the operating temperature range of –40°C to 85°C.
Note 5: The LT6013C and LT6014C are guaranteed to meet the specified
performance from 0°C to 70°C and are designed, characterized and
expected to meet specified performance from –40°C to 85°C but is not
tested or QA sampled at these temperatures. The LT6013I and LT6014I are
guaranteed to meet specified performance from –40°C to 85°C.
Note 8: The specifications for V , I , and I depend on the grade and on
OS B OS
the package. The following table clarifies the notations.
STANDARD GRADE
LT6013S8, LT6014S8
LT6013DD, LT6014DD
A GRADE
S8 Package
LT6013AS8, LT6014AS8
LT6013ADD, LT6014ADD
DFN Package
U W
TYPICAL PERFOR A CE CHARACTERISTICS
Input Offset Voltage
Offset Voltage
vs Input Common Mode Voltage
vs Temperature
Distribution of Input Offset Voltage
125
100
75
30
25
1000
900
800
700
600
500
400
300
200
100
0
LT6013AS8
V
= 5V, 0V
= 25°C
V
= 5V, 0V
V = 5V, 0V
S
S
A
S
T
REPRESENTATIVE UNITS
T
A
= –40°C
50
20
25
T
= 25°C
= 85°C
A
0
15
10
T
A
–25
–50
–75
–100
–125
5
0
–50
0
25
50
75 100 125
–25
–45 –35 –25 –15 –5
5
15 25 35 45
0
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.5
TEMPERATURE (°C)
INPUT OFFSET VOLTAGE (µV)
INPUT COMMON MODE VOLTAGE (V)
60134 G02
60134 G01
60134 G03
Input Bias Current
vs Input Common Mode Voltage
Input Bias Current vs Temperature
Distribution of Input Bias Current
35
30
25
20
15
10
5
800
600
400
300
LT6013AS8
V
= 5V, 0V
V = 5V, 0V
S
S
TYPICAL PART
T
= –40°C
A
400
200
200
100
0
0
T
= 25°C
A
–200
–400
–600
–800
–100
–200
–300
–400
T
= 85°C
A
0
–175 –125 –75 –25 25 75 125 175
INPUT BIAS CURRENT (pA)
0
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
0.5
–50 –25
0
25
125
50
75 100
INPUT COMMON MODE VOLTAGE (V)
TEMPERATURE (°C)
60134 G04
60134 G06
60134 G05
60134fb
8
LT6013/LT6014
U W
TYPICAL PERFOR A CE CHARACTERISTICS
Total Input Noise
0.1Hz to 10Hz Voltage Noise
en, in vs Frequency
vs Source Resistance
10
1
1000
V
T
= 5V, 0V
V
T
= 5V, 0V
= 25°C
S
A
S
CURRENT NOISE
= 25°C
A
UNBALANCED
f = 1kHz
SOURCE RESISTORS
UNBALANCED
SOURCE RESISTORS
1/f CORNER = 40Hz
0.1
TOTAL NOISE
10
100
1/f CORNER = 2Hz
VOLTAGE NOISE
0.01
0.001
0.0001
RESISTOR NOISE ONLY
V
= 5V, 0V
= 25°C
S
A
T
1
1
10
100
1000
100
1k
10k 100k
1M
10M 100M
0
1
2
3
4
5
6
7
8
9
10
FREQUENCY (Hz)
SOURCE RESISTANCE (Ω)
TIME (SEC)
60134 G07
60134 G08
60134 G09
0.01Hz to 1Hz Voltage Noise
0.1Hz to 10Hz Current Noise
0.01Hz to 1Hz Current Noise
V
T
= 5V, 0V
V
T
= 5V, 0V
S
A
BALANCED SOURCE RESISTANCE
V
T
= 5V, 0V
= 25°C
S
A
S
A
= 25°C
= 25°C
BALANCED SOURCE RESISTANCE
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
0
1
2
3
4
5
6
7
8
9
10
TIME (SEC)
TIME (SEC)
TIME (SEC)
60134 G32
60134 G10
60134 G31
Output Saturation Voltage
vs Load Current (Output High)
Output Voltage Swing
vs Temperature
Output Saturation Voltage
vs Load Current (Output Low)
+
1
1
V
V
= 5V, 0V
S
V = 5V, 0V
S
V
= 5V, 0V
S
NO LOAD
–20
–40
T
= 85°C
A
T = 85°C
A
OUTPUT HIGH
OUTPUT LOW
–60
T
= 25°C
A
T
= 25°C
A
0.1
0.1
T
= –40°C
A
60
40
20
T
= –40°C
A
–
0.01
V
0.01
0.01
0.1
1
10
–25
0
50
75 100 125
–50
25
0.01
0.1
1
10
LOAD CURRENT (mA)
LOAD CURRENT (mA)
TEMPERATURE (°C)
60134 G12
60134 G13
60134 G11
60134fb
9
LT6013/LT6014
U W
TYPICAL PERFOR A CE CHARACTERISTICS
Warm-Up Drift
THD + Noise vs Frequency
Supply Current vs Supply Voltage
10
1
3
2
1
0
500
450
400
350
300
250
200
150
100
50
V
V
A
A
= 5V, 0V
= 2V
PER AMPLIFIER
S
OUT
P-P
T
= 25°C
= 5
V
±15V
T
= 85°C
A
0.1
T
= 25°C
A
0.01
0.001
0.0001
±2.5V
T
= –40°C
A
0
30
60
90
120
150
10
100
1k
10k
100k
0
2
4
6
8
10 12 14 16 18 20
TIME AFTER POWER-ON (SECONDS)
FREQUENCY (Hz)
SUPPLY VOLTAGE (±V)
60134 G16
60134 G15
60134 G14
THD + Noise vs Frequency
Settling Time vs Output Step
Channel Separation vs Frequency
10
1
160
140
120
100
80
4
LT6014
V
V
T
= ±15V
V
A
T
= 5V, 0V
= 5
= 25°C
S
S
V
A
0.1%
V
T
= 5V, 0V
= 25°C
= 20V
S
A
OUT
P-P
0.01%
= 25°C
A
A
= 5
V
3
2
1
0
0.1
0.01
0.001
0.0001
60
40
20
0
10
100
1k
10k
0
5
10
15
20
25
30
1
10
100
1k
10k 100k
1M
FREQUENCY (Hz)
SETTLING TIME (µs)
FREQUENCY (Hz)
60134 G17
60134 G20
60134 G18
PSRR vs Frequency, Split Supplies
PSRR vs Frequency, Single Supply
CMRR vs Frequency
160
140
120
100
80
140
120
100
80
140
120
100
80
T
= 25°C
V
T
= ±15V
= 25°C
V
T
= 5V, 0V
= 25°C
A
S
A
S
A
POSITIVE
SUPPLY
60
60
60
NEGATIVE
SUPPLY
40
40
40
20
20
20
0
0
0
1
10
100
1k
10k 100k
1M
0.1
1
10 100 1k 10k 100k 1M
FREQUENCY (Hz)
0.1
1
10 100 1k 10k 100k 1M
FREQUENCY (Hz)
FREQUENCY (Hz)
60134 G21
60134 G22
60134 G19
60134fb
10
LT6013/LT6014
U W
TYPICAL PERFOR A CE CHARACTERISTICS
Gain and Phase vs Frequency
Output Impedance vs Frequency
Open-Loop Gain vs Frequency
1000
100
10
140
120
100
80
60
50
–80
V
T
= 5V, 0V
= 25°C
V
T
= 5V, 0V
S
A
V
T
= 5V, 0V
= 25°C
= 10k
S
S
= 25°C
A
A
R
= 10k
R
L
L
40
–120
–160
–200
–240
–280
30
PHASE
20
60
GAIN
10
A
= 100
V
40
1
0
20
–10
–20
–30
–40
A
= 10
= 5
V
0
0.1
0.01
A
–20
–40
V
1
10
100
1k
10k
100k
0.01 0.1
1
10 100 1k 10k 100k 1M 10M
FREQUENCY (Hz)
1k
10k
100k
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
60134 G23
60134 G24
60134 G25
Gain vs Frequency, AV = 5
Gain vs Frequency, AV = –4
22
18
14
10
6
20
16
12
8
V
T
= 5V, 0V
= 25°C
V
T
= 5V, 0V
= 25°C
S
A
S
A
C
L
= 500pF
C
L
= 500pF
C
= 50pF
L
C
= 50pF
L
4
2
0
–2
–4
1k
10k
100k
1M
1k
10k
100k
1M
FREQUENCY (Hz)
FREQUENCY (Hz)
60134 G26
60134 G27
Small-Signal Transient Response
Large-Signal Transient Response
Rail-to-Rail Output Swing
5V
0V
5V
20mV/DIV
1V/DIV
1V/DIV
0V
AV = 5
2µs/DIV
60134 G28
AV = –4
20µs/DIV
60134 G29
AV = –4
100µs/DIV
60134 G30
VS = 5V, 0V
VS = 5V, 0V
R
L = 2k
RL = 2k
60134fb
11
LT6013/LT6014
W U U
U
APPLICATIO S I FOR ATIO
Not Unity-Gain Stable
3. Findthedifferentialvoltagethatwouldappearacross
the two inputs of the op amp.
The LT6013 and LT6014 amplifiers are optimized for the
lowest possible noise and smallest package size, and are
intentionally decompensated to be stable in a gain con-
figuration of 5 or greater. Do not connect the amplifiers in
a gain less than 5 (such as unity-gain). For a unity-gain
stable amplifier with similar performance though slightly
higher noise and lower bandwidth, see the LT6010 and
LT6011/LT6012 datasheets.
4. The ratio of the output voltage to the input voltage is
the gain that the op amp “sees”. This ratio must be
5 or greater.
Do not place a capacitor bigger than 200pF between the
outputtotheinvertinginputunlessthereisa5timeslarger
capacitor from that input to AC ground. Otherwise, the op
amp gain would drop to less than 5 at high frequencies,
and the stability of the loop would be compromised.
Figure1showssimpleinvertingandnon-invertingopamp
configurations and indicates how to achieve a gain of 5 or
greater. For more general feedback networks, determine
the gain that the op amp “sees” as follows:
The LT6013 and LT6014 can be used in lower gain
configurations when an impedance is connected between
the op amp inputs. Figure 2 shows inverting and non-
inverting unity gain connections. The RC network across
the op amp inputs results in a large enough noise gain at
high frequencies, thereby ensuring stability. At low fre-
quencies, the capacitor is an open circuit so the DC
precision (offset and noise) remains very good.
1. Suppose the op amp is removed from the circuit.
2. Applyasmall-signalvoltageattheoutputnodeofthe
op amp.
V
+
–
V
IN
+
–
V
IN
+
–
REF
R
G
V
IN
R
F
R
F
60134 F01
R
G
V
REF
INVERTING:
SIGNAL GAIN = –R /R
NONINVERTING:
UNITY-GAIN:
DO NOT USE
SIGNAL GAIN = 1 + R /R
G
F
G
F
OP AMP GAIN = 1 + R /R
OP AMP GAIN = 1 + R /R
F G
STABLE IF 1 + R /R ≥ 5
F G
F
G
STABLE IF 1 + R /R ≥ 5
F
G
Figure 1. Use LT6013 and LT6014 in a Gain of 5 or Greater
10k
10k
10k
V
V
IN
+
–
–
+
IN
V
OUT
V
OUT
2.5k
3k
1nF
1nF
60134 F02
UNITY GAIN FOLLOWER
UNITY GAIN INVERTER
Figure 2. Stabilizing Op Amp for Unity Gain Operation
60134fb
12
LT6013/LT6014
W U U
APPLICATIO S I FOR ATIO
U
areexpected. Forexample, a1kresistorinserieswitheach
input provides protection against 30V differential voltage.
Preserving Input Precision
Preserving the input accuracy of the LT6013 and LT6014
requires that the applications circuit and PC board layout
do not introduce errors comparable to or greater than the
10µVtypicaloffsetoftheamplifiers.Temperaturedifferen-
tials across the input connections can generate thermo-
couple voltages of 10’s of microvolts so the connections
totheinputleadsshouldbeshort,closetogetherandaway
fromheatdissipatingcomponents.Aircurrentsacrossthe
board can also generate temperature differentials.
Input Common Mode Range
The LT6013/LT6014 output is able to swing close to each
power supply rail (rail-to-rail out), but the input stage is
limitedtooperatingbetweenV–+1VandV+–1.2V.Exceed-
ing this common mode range will cause the gain to drop
to zero; however, no phase reversal will occur.
Total Input Noise
Theextremelylowinputbiascurrentsallowhighaccuracy
to be maintained with high impedance sources and feed-
backresistors.TheLT6013andLT6014lowinputbiascur-
rents are obtained by a cancellation circuit on-chip. This
The LT6013 and LT6014 amplifiers contribute negligible
noisetothesystemwhendrivenbysensors(sources)with
impedance between 10kΩ and 1MΩ. Throughout this
range, total input noise is dominated by the 4kTRS noise
of the source. If the source impedance is less than 10kΩ,
the input voltage noise of the amplifier starts to contribute
withaminimumnoiseof9.5nV/√Hzforverylowsourceim-
pedance. If the source impedance is more than 1MΩ, the
input current noise of the amplifier, multiplied by this high
impedance, starts to contribute and eventually dominate.
Total input noise spectral density can be calculated as:
causes the resulting IB+ and IB to be uncorrelated, as
–
impliedbytheIOS specificationbeingcomparabletoIB.Do
not try to balance the input resistances in each input lead;
instead keep the resistance at either input as low as pos-
sible for maximum accuracy.
Leakage currents on the PC board can be higher than the
inputbiascurrent.Forexample,10GΩofleakagebetween
a 15V supply lead and an input lead will generate 1.5nA!
Surround the input leads with a guard ring driven to the
samepotentialastheinputcommonmodetoavoidexces-
sive leakage in high impedance applications.
2
v
n(TOTAL) = en + 4kTRS +(inRS)2
where en = 9.5nV/√Hz , in = 0.15pA/√Hz and RS is the total
impedance at the input, including the source impedance.
Input Protection
Capacitive Loads
TheLT6013/LT6014featureson-chipback-to-backdiodes
between the input devices, along with 500Ω resistors in
series with either input. This internal protection limits the
input current to approximately 10mA (the maximum al-
lowed) for a 10V differential input voltage. Use additional
external series resistors to limit the input current to 10mA
in applications where differential inputs of more than 10V
The LT6013 and LT6014 can drive capacitive loads up to
500pF at a gain of 5. The capacitive load driving capability
increases as the amplifier is used in higher gain configu-
rations. A small series resistance between the output and
the load further increases the amount of capacitance that
the amplifier can drive.
60134fb
13
LT6013/LT6014
W
W
SI PLIFIED SCHE ATIC
(One Amplifier)
+
V
R6
R3
R4
R5
Q7
Q3
Q18
Q19
Q6
C1
Q8
R
C1
Q5
Q4
Q13
C2
Q21
B
A
D3
D4
D5
OUT
Q22
Q12
Q16
C3
R1
500Ω
Q14
Q17
Q20
C
B
A
–IN
+IN
D1
D2
R2
500Ω
Q1
Q2
Q11
Q9
Q15
Q10
–
60134 SS
V
60134fb
14
LT6013/LT6014
U
PACKAGE DESCRIPTIO
DD Package
8-Lead Plastic DFN (3mm × 3mm)
(Reference LTC DWG # 05-08-1698)
R = 0.115
0.38 ± 0.10
TYP
5
8
0.675 ±0.05
3.5 ±0.05
2.15 ±0.05 (2 SIDES)
1.65 ±0.05
3.00 ±0.10
(4 SIDES)
1.65 ± 0.10
(2 SIDES)
PIN 1
TOP MARK
(NOTE 6)
PACKAGE
OUTLINE
(DD8) DFN 1203
4
1
0.25 ± 0.05
0.75 ±0.05
0.200 REF
0.25 ± 0.05
0.50 BSC
0.50
BSC
2.38 ±0.05
(2 SIDES)
2.38 ±0.10
(2 SIDES)
0.00 – 0.05
BOTTOM VIEW—EXPOSED PAD
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
NOTE:
1. DRAWING TO BE MADE A JEDEC PACKAGE OUTLINE M0-229 VARIATION OF (WEED-1)
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION
ON TOP AND BOTTOM OF PACKAGE
S8 Package
8-Lead Plastic Small Outline (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1610)
.189 – .197
(4.801 – 5.004)
NOTE 3
.045 ±.005
.160 ±.005
.050 BSC
7
5
8
6
.053 – .069
(1.346 – 1.752)
.004 – .010
(0.101 – 0.254)
.245
MIN
.150 – .157
(3.810 – 3.988)
NOTE 3
.228 – .244
(5.791 – 6.197)
.050
(1.270)
BSC
.014 – .019
(0.355 – 0.483)
TYP
.010 – .020
(0.254 – 0.508)
.030 ±.005
TYP
× 45°
1
3
4
2
RECOMMENDED SOLDER PAD LAYOUT
.008 – .010
(0.203 – 0.254)
0°– 8° TYP
NOTE:
INCHES
(MILLIMETERS)
1. DIMENSIONS IN
3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
.016 – .050
2. DRAWING NOT TO SCALE
(0.406 – 1.270)
SO8 0303
60134fb
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tationthattheinterconnectionofitscircuitsasdescribedhereinwillnotinfringeonexistingpatentrights.
15
LT6013/LT6014
U
TYPICAL APPLICATIO
Low Power Hall Sensor Amplifier
V
S
3
2
8
HALL ELEMENT
ASAHI-KASEI
HW-108A (RANK D)
www.asahi-kasei.co.jp
1µF
+
1
V
S
+
1/2 LT6014
4
–
2
6
1
LT1790-1.25
1, 2
49.9k
10k
OFFSET
400Ω
ADJUST
×4
7.87k
V
0.1µF
S
499Ω
499Ω
1%
V
OUT
+
3
4
100k
1%
LT1782
49.9k
V
S
= 3V TO 18V
–
S
I
= ~600µA
6
V
OUT
= ~40mV/mT
–
7
26.7k
1%
–
1/2 LT6014
5
+
4
60134 TA02
Precision Micropower Photodiode Amplifier
C1
20pF
R1
100k
V
OUT
PHOTODIODE
GAIN: A = 100kΩ =
Z
I
10% TO 90% RISE TIME: t = 3.2µs
BANDWIDTH: BW = 110kHz
r
+
V
S
I
PHOTODIODE
–
+
880nm IR
PHOTODIODE
V
LT6013
–
OUT
C
D
λ
170pF
V
= ±1.35V TO ±18V
S
OPTO-DIODE CORP
ODD-45W
C1, CD SATISFY GAIN OF 5
STABILITY REQUIREMENT AT AC
V
S
OUTPUT OFFSET = 60µV MAX FOR LT6013AS8
60134 TA04
RELATED PARTS
PART NUMBER
LT1112/LT1114
LT1880
DESCRIPTION
COMMENTS
Dual/Quad Low Power, Picoamp Input Precision Op Amps
Rail-to-Rail Output, Picoamp Input Precision Op Amp
250pA Input Bias Current
SOT-23
LT1881/LT1882
LT1884/LT1885
LT6011/LT6012
LT6010
Dual/Quad Rail-to-Rail Output, Picoamp Input Precision Op Amps
C
Up to 1000pF
LOAD
Dual/Quad Rail-to-Rail Output, Picoamp Input Precision Op Amps 9.5nV/√Hz Input Noise
Dual/Quad Low Power Rail-to-Rail Output, Precision Op Amps
Single Low Power Rail-to-Rail Output, Precision Op Amp
14nV/√Hz, Unity-Gain Stable Version of LT6014
200pA Input Bias Current, Shutdown Feature
60134fb
LT/LT 0305 REV B • PRINTED IN USA
LinearTechnology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
16
●
●
(408) 432-1900 FAX: (408) 434-0507 www.linear.com
©LINEAR TECHNOLOGY CORPORATION 2004
相关型号:
LT6014AIDD#TRPBF
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: DFN; Pins: 8; Temperature Range: -40°C to 85°C
Linear
LT6014AIS8#PBF
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C
Linear
LT6014AIS8#TR
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C
Linear
LT6014AIS8#TRPBF
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C
Linear
LT6014CDD#PBF
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: DFN; Pins: 8; Temperature Range: 0°C to 70°C
Linear
LT6014CDD#TR
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: DFN; Pins: 8; Temperature Range: 0°C to 70°C
Linear
LT6014CS8#PBF
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C
Linear
LT6014CS8#TR
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C
Linear
LT6014CS8#TRPBF
LT6014 - Dual 145µA, 9.5nV/rtHz, AV >=5, Rail-to-Rail Output Precision Op Amps; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C
Linear
©2020 ICPDF网 联系我们和版权申明