MAAPSS0111 [TE]

1.25 W VSAT Power Amplifier 13.75-14.5 GHz; 为1.25W VSAT功率放大器13.75-14.5 GHz的
MAAPSS0111
型号: MAAPSS0111
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

1.25 W VSAT Power Amplifier 13.75-14.5 GHz
为1.25W VSAT功率放大器13.75-14.5 GHz的

放大器 功率放大器
文件: 总6页 (文件大小:145K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
RoHS  
Compliant  
1.25 W VSAT Power Amplifier  
13.75—14.5 GHz  
MAAPSS0111  
V2P  
Functional Schematic  
Features  
Saturated Output Power: 31 dBm Typical  
High Linear Gain: 34 dB Typical  
High Power Added Efficiency: 31 % at PSAT  
50 Ω Input / Output Match  
Lead-Free 6 mm 28-lead PQFN Package  
100% Matte Tin Plating over Copper  
Halogen-Free “Green” Mold Compound  
RoHS* Compliant and 260°C Reflow Compatible  
Description  
The MAAPSS0111 is a four stage MMIC power  
amplifier designed specifically for Ku-Band VSAT  
applications. It can be used as either a driver or an  
output stage amplifier. The MAAPSS0111 is fully  
matched input and output to 50 ohms which  
eliminates any sensitive external RF tuning  
components. The device is packaged in a lead free  
6 mm 28-lead PQFN leadless package for high  
volume manufacturing.  
Pin Confiuration  
DC Pin  
Function  
DC Pin  
Function  
1
2
3
4
5
6
GND  
GND  
RFIN  
RFIN  
GND  
GND  
15  
16  
17  
18  
19  
20  
GND  
GND  
GND  
RFOUT  
RFOUT  
GND  
The MAAPSS0111 is fabricated using a high  
reliability self-aligned gate MESFET process, MSAG,  
to realize good power added efficiency and gain.  
The MSAG process features full passivation for high  
performance and reliability.  
7
GND  
21  
GND  
8
VGG  
22  
23  
24  
25  
26  
27  
28  
29  
GND  
GND  
GND  
VDD  
9
GND  
GND  
GND  
GND  
GND  
GND  
Ordering Information 1  
10  
11  
12  
13  
14  
Part Number  
Package  
GND  
GND  
GND  
Paddle 2  
MAAPSS0111TR-3000  
13 inch, 3000 piece reel  
Sample Test Board  
(Includes 5 Samples)  
MAAPSS0111SMB  
2. The exposed pad centered on the package bottom must  
be connected to RF and DC ground.  
1. Reference Application Note M513 for reel size information.  
This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based  
on measured results and target specifications. Commitment to produce in volume is not guaranteed.  
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.  
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
1.25 W VSAT Power Amplifier  
13.75—14.5 GHz  
MAAPSS0111  
V2P  
Electrical Specifications: VDD = 8 V, IDQ = 400 mA, TA = 25 °C, Z0 = 50 Ω  
Parameter  
Frequency  
Test Conditions  
Units Min.  
Typ.  
Max.  
14.5  
GHz  
dB  
13.75  
Input Return Loss  
Output Return Loss  
Gain  
-16  
-12  
34  
dB  
dB  
Gain Flatness  
PSAT  
dB  
1
dBm  
31  
IDQ  
PSAT  
mA  
mA  
400  
530  
—-  
Current  
PAE  
PSAT  
%
31  
Voltage  
Current under saturation  
V
mA  
-1.9  
0.2  
Gate Bias  
Duty Cycle  
%
100  
+2.5V < VCC < +8.0 V, POUT = saturated,  
VSWR < 5:1, -40°C < TC < +85 ºC,  
RBW = 3 MHz max hold  
Stability  
All spurs < -60 dBc  
Absolute Maximum Ratings 3,4  
Operating the MAAPSS0111  
The MAAPSS0111 is static sensitive. Please handle  
with care. To operate the device, follow these steps.  
Ramp down or shutdown in reverse order (gate bias  
on first and off last).  
Parameter  
Input Power  
Absolute Maximum  
+10 dBm  
+10 Volts  
Operating Supply Voltage  
Operating Gate Voltage  
Operating Base Temperature  
Channel Temperature  
Storage Temperature  
-3 Volts  
1. Apply VGG (-2.0 V).  
-40°C to +85°C  
+160 °C  
2. Apply VDD (8.0 V Typical).  
3. Set IDQ by adjusting VGG  
.
-40°C to +150°C  
4. Apply RFIN.  
3. Exceeding any one or combination of these limits may cause  
permanent damage to this device.  
4. M/A-COM does not recommend sustained operation near  
these survivability limits.  
Handling Procedures  
Please observe the following precautions to avoid  
damage:  
Static Sensitivity  
Gallium Arsenide Integrated Circuits are sensitive  
to electrostatic discharge (ESD) and can be  
damaged by static electricity. Proper ESD control  
techniques should be used when handling these  
devices.  
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
1.25 W VSAT Power Amplifier  
13.75—14.5 GHz  
MAAPSS0111  
V2P  
Evaluation Test Board  
Cross Section View  
External Parts List  
Designator  
C1, C10  
Value  
1 uF  
Foot Print  
0402  
C2, C9  
10 pF  
0402  
C3, C8  
C4, C7  
C5, C6  
10 uF  
0.1 uF  
100 pF  
0804  
0402  
0402  
Notes on board design:  
1. A low loss dielectric material such as Rogers 4003, er = 3.38, is recommended for this application.  
2. A substrate thickness of 20 mils (0.508 mm) maximum is recommended to minimize thermal resistance and  
ground impedances.  
3. RF transmission line impedance must be 50 ohms (w = 42 mils (1.0668 mm) for t = 20 mils (0.508 mm),  
Rogers 4003).  
4. The board must provide low thermal resistance from package base to heat sink to accommodate the 3 W  
typical power dissipation.  
5. Metal foil thickness in the vias is critical to thermal resistance. The recommended metalization is 1 oz  
(35 mm minimum thickness).  
6. The application board is configured with 36 vias, each 12 mil (0.3048 mm) in diameter beneath the package  
base. Conductive via fill material is recommended to minimize thermal resistance and to prevent solder from  
wicking into vias.  
7. The exposed package pad must be properly soldered to the board.  
8. Case temperature is measured at the interface between the package bottom and circuit board.  
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
1.25 W VSAT Power Amplifier  
13.75—14.5 GHz  
MAAPSS0111  
V2P  
Performance Curves: VDD = 8 V, IDQ = 450 mA, TA = 40 °C, Z0 = 50 Ω  
Output Return Loss  
Input Return Loss  
0
-5  
0
-5  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
8
10  
12  
14  
16  
18  
8
10  
12  
14  
16  
18  
Frequency (GHz)  
Frequency (GHz)  
Gain  
Gain, 12 - 16 GHz  
40  
32  
24  
16  
8
40  
38  
36  
34  
32  
30  
28  
26  
24  
22  
20  
0
-8  
-16  
-24  
-32  
8
10  
12  
14  
16  
18  
12  
13  
14  
15  
16  
Frequency (GHz)  
Frequency (GHz)  
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
1.25 W VSAT Power Amplifier  
13.75—14.5 GHz  
MAAPSS0111  
V2P  
Typical Performance Curves: VDD = 8 V, IDQ = 400 mA, TA = 40 °C, Z0 = 50 Ω  
Pout, Gain, PAE vs. PIN @ 14.25 GHz  
PSAT vs. Frequency, PIN = 4 dBm  
38  
34  
36  
34  
32  
30  
28  
26  
32  
30  
28  
26  
-40 C  
40 C  
85 C  
24  
Pout  
Gain  
PAE  
22  
20  
24  
22  
-10.0  
-7.5  
-5.0  
-2.5  
0.0  
2.5  
5.0  
13.5 13.7 13.9 14.1 14.2 14.4 14.6 14.8 15.0  
P
(dBm)  
Frequency (GHz)  
IN  
Gate Current vs. POUT  
PDISS vs. Max. Case Temperature  
8
0.0009  
0.0008  
0.0007  
0.0006  
0.0005  
0.0004  
0.0003  
0.0002  
0.0001  
0
7
6
5
4
P
= V * I - P  
DD DD OUT  
DISS  
3
2
-0.0001  
20  
30  
40  
50  
60  
70  
80  
90  
100  
24  
25  
26  
27  
28  
29  
30  
31  
32  
Max. Case Temp. T  
(
º
C)  
P
(dBm)  
C
OUT  
PDISS, IDD vs. Pout @ 14.25 GHz  
4.0  
0.55  
Idd  
3.6  
3.2  
2.8  
2.4  
2.0  
0.50  
0.45  
0.40  
0.35  
0.30  
Pdiss  
22 23 24 25 26 27 28 29 30 31 32  
P
(dBm)  
OUT  
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
RoHS  
Compliant  
1.25 W VSAT Power Amplifier  
13.75—14.5 GHz  
MAAPSS0111  
V2P  
Lead-Free 6 mm 28-Lead PQFN†  
Reference Application Note M538 for lead-free solder reflow recommendations.  
Meets JEDEC moisture sensitivity level 1 requirements.  
6
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  

相关型号:

MAAPSS0111SMB

1.25 W VSAT Power Amplifier 13.75-14.5 GHz
TE

MAAPSS0111TR-3000

1.25 W VSAT Power Amplifier 13.75-14.5 GHz
TE

MAAPSS0113

DECT Power Amplifier 1880 - 1930 MHz
TE

MAAPSS0113SMB

DECT Power Amplifier 1880 - 1930 MHz
TE

MAAPSS0113TR-3000

DECT Power Amplifier 1880 - 1930 MHz
TE

MAAT-000004-SMB003

Attenuator, Digital, 5-Bit 0.1 - 20.0 GHz
TE

MAAT-010521-001SMB

Voltage Variable Attenuator
TE

MAAT-010521-TR0500

Voltage Variable Attenuator
TE

MAAT-010521-TR3000

Voltage Variable Attenuator
TE

MAAT-010521_15

Voltage Variable Attenuator
TE

MAATCC0005

Digital Attenuator 31.5dB, 6-Bit, TTL Driver, DC-2.0 GHz
TE

MAATCC0005-TB

Digital Attenuator 31.5dB, 6-Bit, TTL Driver, DC-2.0 GHz
TE