2-5086182-5 [MACOM]
AMPMODU Interconnection System; AMPMODU互连系统型号: | 2-5086182-5 |
厂家: | Tyco Electronics |
描述: | AMPMODU Interconnection System |
文件: | 总321页 (文件大小:12983K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AMPMODU
Interconnection System
AMPMODU Interconnection System
Table of Contents
PC/104 and PC/104-Plus Connectors
1
Introduction …………………………………………………………………………………5
PC/104, Press Fit …………………………………………………………………………6, 7
PC/104-Plus, Press Fit ……………………………………………………………………8, 9
PC/104, Solder ……………………………………………………………………………10
PC/104-Plus, Solder ………………………………………………………………………11
Accessories, Kits …………………………………………………………………………12
1
2
3
4
5
6
7
8
0.050 [1.27] x 0.050 [1.27] CENTERLINE
2 AMPMODU 50/50 Grid
Board-to-BoardVertical Receptacles and Headers:
Introduction ……………………………………………………………………………13, 14
Vertical Receptacles, Double Row ………………………………………………………15
Vertical Headers, Double Row ……………………………………………………………16
Recommended PC Board Layouts ………………………………………………………17
Board-to-Board Right-Angle Headers:
Introduction …………………………………………………………………………………18
Right-Angle Headers, Double Row, Latching and Non-Latching ……………………19
Cable-to-Board Connectors:
Introduction …………………………………………………………………………………20
Receptacle Connectors, Double Row, With and Without Latch ………………………21
Cable Connector Terminating Cover, Double Row ……………………………………22
IDC (Insulation Displacement Crimp) Tooling …………………………………………23
Performance Specifications…………………………………………………………………24
Technical Documents ………………………………………………………………………24
.050 [1.27] x 0.100 [2.54] CENTERLINE
3 AMPMODU System 50……………………………………………………………………………25
Board-to-Board Connectors,Thru-Hole:
Introduction …………………………………………………………………………………26
Headers, Shrouded and Unshrouded ………………………………………………27-35
Introduction …………………………………………………………………………………36
Receptacles ……………………………………………………………………………37-40
PC Board Hole Layouts ………………………………………………………………41, 42
Board-to-Board Connectors, Surface-Mount:
Introduction …………………………………………………………………………………43
Headers ……………………………………………………………………………………44
Receptacles ………………………………………………………………………………45
Cable-to-Board Connectors, FFC Cable:
Introduction …………………………………………………………………………………46
Flexible Flat Conductor Cable ……………………………………………………………47
FFC Contacts ………………………………………………………………………………48
Receptacle Housings …………………………………………………………………49-52
ZIF-Line Connectors …………………………………………………………………53, 54
Cable-to-Board Connectors, Ribbon Cable:
Introduction …………………………………………………………………………………55
Ribbon Cable Receptacles ………………………………………………………………56
Paddleboard Receptacles ………………………………………………………………57
Flat Ribbon Cable ……………………………………………………………………58, 59
Application Tooling for Flex Film Contacts ………………………………………………60
ApplicationTooling ………………………………………………………………………60-62
Performance Specifications…………………………………………………………………63
Technical Documents ………………………………………………………………………64
2
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Table of Contents (Continued)
AMPMODU 2mm Connectors
4
AMPMODU 2mm Connectors (Board to Board)……………………………………………65
Headers, Unshrouded, Double Row, Thru-Hole Mount ………………………………66, 67
Breakaway Headers, Unshrouded, Double Row, Thru-Hole Mount …………………68-70
Breakaway Headers, Unshrouded, Double Row, Surface Mount ……………………71, 72
Stacking Header, Unshrouded, Double Row, Thru-Hole Mount …………………………73
Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount …………………74, 75
Headers, Shrouded, Double Row, Surface Mount ……………………………………76, 77
Headers, Shrouded, Double Row, Thru-Hole Mount with Cable Shrouds …………78, 79
Receptacles, Double Row, Thru-Hole, Vertical Mount…………………………………80, 81
Receptacles, Double Row, Surface Mount, Right-Angle Mount …………………………82
Receptacles, Double Row, Thru-Hole, Right-Angle Mount ………………………………83
Receptacles, Double Row, Surface Mount, Vertical Mount ………………………………84
1
2
3
4
5
6
7
8
.100 [2.54] x .100 [2.54] CENTERLINE
5
Introduction ………………………………………………………………………………85-87
Terms Explained………………………………………………………………………………87
Wire Sizes………………………………………………………………………………………88
Contact Platings ………………………………………………………………………………88
Mating Post Lengths …………………………………………………………………………88
ApplicationTooling …………………………………………………………………………88
Board-to-Board Solutions Guides, .100[2.54] Centerline Products …………………89
Wire-to-Board Solutions Guide, .100[2.54] Centerline Products………………………89
Mating Post Selection Guide ………………………………………………………………90
Parallel Stacking Guide for Board-to-Board Applications ……………………………91
Board-to-Board Products:
Unshrouded Headers ………………………………………………………………92-100
Breakaway and Retention Headers-Unshrouded ………………………………101-105
Reeled Breakaway Headers ………………………………………………………106, 107
Surface Mount Breakaway Headers ………………………………………………108-110
Unshrouded Stacking Headers- Breakaway ……………………………………111-113
Shrouded Headers …………………………………………………………………114-140
Standard Profile……………………………………………………………………114-133
Low Profile …………………………………………………………………………134-140
Shrouded Stacking Headers ………………………………………………………141-144
ACTION PIN Headers ………………………………………………………………145-149
ACTION PIN Press-Fit Posts ………………………………………………………150, 151
Application Tooling for ACTION PIN Posts ……………………………………152, 153
ACTION PIN Stacking Connectors ………………………………………………154-161
Application Tooling for AMP ACTION PIN Stacking Connectors …………………162
0.025 [0.64] Square Posts ………………………………………………………………163
0.025 [0.64] Square Continuous Posts……………………………………………164, 165
0.045 [1.14] Square Continuous Posts……………………………………………166, 167
Horizontal Mount Receptacle Assemblies, Mod II ………………………………168-173
Vertical Mount Receptacle Assemblies, Mod II & Mod IV ………………………174-184
Surface Mount Vertical Receptacles, Mod IV ……………………………………185-192
Two-Piece Printed Circuit Board Connectors ……………………………………193-202
Accessories …………………………………………………………………………203-205
Wire-to-Board Products:
Locking Clip Contacts and Housings ……………………………………………206-209
Mod IV Contacts and Housings ……………………………………………………210-220
Short Point Contacts and Housings ………………………………………………221-224
MTE Interconnection System ………………………………………………………225-250
Surface Mount MTE Headers (Right-Angle & Vertical) ………………………251, 252
Interchangeable Contacts, Wire Crimp (Snap-In) ……………………………253, 254
MT and Shielded MT Connectors …………………………………………………255-265
Mini-Tandem Spring Receptacle Contacts ………………………………………266-269
ApplicationTooling ……………………………………………………………………270-275
Technical Documents …………………………………………………………………276-278
3
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Table of Contents (Continued)
.125 [3.18] x .125 [3.18] CENTERLINE
6
Wire-to-Board Product:
Level V IDC Connectors ……………………………………………………………279-282
.156 [3.96] CENTERLINE
7
Mod I 0.031 x 0.062 Interconnection System
Introduction …………………………………………………………………………283, 284
Receptacles, Vertical and Horizontal Board Mount ……………………………285, 286
Receptacle Assemblies, Vertical and Horizontal Board Mount …………………287-289
Receptacles, Crimp Snap-In (Wire Applied) …………………………………………290
Receptacle Housings, Standard Profile-Unkeyed (With/Without Strain Relief) …291, 292
Receptacle Housings, Low Profile-Keyed ……………………………………………293
Posts, Machined Applied ………………………………………………………………294
Headers:
1
2
3
4
5
6
7
8
Straight Post, Keyed ……………………………………………………………295, 296
Right-Angle, Keyed ……………………………………………………………………297
Locking Clip Contacts, Crimp Snap-In (Wire Applied) ………………………………298
Locking Clip Connector Housings, Single Row, Crimp Snap-In ……………………299
ApplicationTooling ………………………………………………………………300-304
Performance Specifications …………………………………………………………305
Technical Documents …………………………………………………………………305
Shunts
8
Dual In-Line Package DIP Shunts…………………………………………………306, 307
Post Shunts …………………………………………………………………………308-310
Performance Specifications …………………………………………………………311
Technical Documents …………………………………………………………………311
Part Number Index …………………………………………………………………………313-316
Restriction on the use of Hazardous Substances
Getting the Information You Need
(RoHS)
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
At TE Connectivity (TE) , we’re ready to support your RoHS
requirements. We’ve assessed more than 1.5 million end items/
components for RoHS compliance, and issued new part num-
bers where any change was required to eliminate the restricted
materials. Part numbers in this catalog are identified as:
I Cross-Reference from
Non-compliant to Compliant Products
I Ability to browse RoHS
Compliant Products in our
on-line catalog
I Downloadable Technical Data
Customer Information
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
RoHS
Customer
Presentation
Support
I More detailed information
regarding the definitions
Center
used above
I So whatever your questions when it comes to RoHS,
we have the answers at www.te.com/leadfree
4
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
PC/104 and PC/104-Plus Connectors
Product Facts
I Press fit design —
eliminates hand soldering
I Unitized PC/104 connector
assembly — eliminates two
piece (64 pin & 40 pin)
configuration
1
I Integral board spacers with
captive hardware — eases
& improves assembly
efficiency while minimizing
stocked hardware
I “Flat-rock” insertable — no
need for complex insertion
tooling
I Recognized by Underwriters'
Laboratories to US
and Canadian
standards
file No. E28476
I Fully compliant with PC104
& PC104-Plus standards
I Solutions available for lead
free processes (ie. ENIG
The PC/104 and PC/104-Plus
Performance Specifications
Electrical Characteristics
Meets requirements of PC/104 and
PC/104-Plus standards
Nominal Resistance —
10 milliohms maximum, D R
Insulation Resistance —
1000 megohms minimum
Need more information?
and silver immersion plated connectors are industry
PCB's)
Call Technical
Support 1-800-522-6752:
standard product offerings
which comply with the
interconnection require-
ments defined by the
PC/104 organization
Technical Support is staffed
with specialists well versed
in all TE products. The
Center can provide you
with:
(http://www.pc104.org)
Both products are designed
specifically for “flat-rock”
press-fit installation for ease
of application. Solder ver-
sion is also available.
Dielectric Withstanding Voltage —
500 VAC for 1 min. at sea level
I
I
I
I
Technical Support
Catalogs
Technical Documents
TE Authorized Distributor
Locations
Mechanical Characteristics
Meets requirements of PC/104 and
PC/104-Plus standards
Optional integral standoffs
minimize the customer’s
system assembly time.
Current — Signal application only
Temperature — –55° to 105°C
Material and Finish
Housing — Black Thermoplastic, UL
94V-0
Contact — Phosphor Bronze, Full Gold
all over Nickel (stackthrough), Gold on
mating end, Tin or Tin-lead on PCB tail
all over Nickel (non-stackthrough)
The TE offering of the
standard PC/104 product is
a unitized connector rather
than the two piece, 40 and
64 position connectors
currently on the market.
Customer needs to stock
and apply only one part
number rather than two.
Connector
Centerline
Position
.100
PC/104
104*
Technical Documents
2.54
.079
2.0
Product Specifications
108-1956
PC/104-Plus
120**
*Two circuits plugged per PC/104 specification.
Other options available.
**One circuit plugged per PC/104-Plus specifica-
Application Specifications
114-13021
tion. Other options available.
5
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
PC/104, Press-Fit
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000005 [0.000130]
min. Gold on remainder, all over .000050
[0.00127] Nickel
1
or
Phosphor Bronze; plated .000015 [0.00038]
min. Gold on mating receptacle end,
.000100-.000200 [0.000254-.00508] matte
tin on compliant section, .000005
{0.000130] min. Gold on remainder of post,
all over .000050 [0.00127] Nickel
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin or tin-lead on remainder, all over
.000050 [0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
Stackthrough, No Standoffs
Gold plated contacts*
Non-Stackthrough, No Standoffs
Tin-lead plated tails*
Part No. 1375795-1 (keyed), Part No. 1375795-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375795-3 (keyed), Part No. 1375795-4 (unkeyed)
Part No. 1375796-1 (keyed), Part No. 1375796-2 (unkeyed)
Matte tin plated tails**
Part No. 1375796-3 (keyed), Part No. 1375796-4 (unkeyed)
.435
[11.05]
.435
[11.05]
.100
[2.54]
Typ.
.119 .013
[3.03 0.34]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
.100
[2.54]
Typ.
Typ.
.483 .013
[12.27 0.34]
Typ.
.025 Sq.
[0.64] Typ.
3.21
[81.60]
.195
[4.95]
Typ.
3.21
[81.60]
.195
2.01
[51.11]
.390
[9.90]
[4.95]
Typ.
Plugged
Circuit
2.01
[51.11]
.390
[9.90]
Plugged
Circuit
Plugged
Circuit
Plugged
Circuit
3.10
[78.74]
3.10
[78.74]
.300
[7.62]
.300
[7.62]
Keyed
Unkeyed
Recommended PC Board Layout
See Customer Drawing for
Hole Geometry and Recommended Plating.
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
6
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
PC/104, Press-Fit (Continued)
Stackthrough, 2 Standoffs
Non-Stackthrough, 2 Standoffs
Gold plated contacts*
Tin-lead plated tails*
Part No. 1375793-1 (keyed), Part No. 1375793-2 (unkeyed)
Part No. 1375794-1 (keyed), Part No. 1375794-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375793-3 (keyed), Part No. 1375793-4 (unkeyed)
Matte tin plated tails**
Part No. 1375794-3 (keyed), Part No. 1375794-4 (unkeyed)
1
.435
[11.05]
.435
[11.05]
.600
Typ.
[15.24]
.600
[15.24]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
.100
[2.54]
Typ.
Typ.
.119 .013
[3.03 0.34]
Typ.
.100
[2.54]
.025 Sq.
[0.64] Typ.
Typ.
.483 0.13
[12.27 0.34]
Typ.
3.21
.195
[81.60]
[4.95]
Typ.
3.21
[81.60]
.195
[4.95]
Typ.
.390
2.01
[51.11]
Plugged
Circuit
[9.90]
.390
2.01
Plugged
Circuit
[9.90]
[51.11]
Plugged
Circuit
Plugged
Circuit
Stackthrough, 4 Standoffs
Non-Stackthrough, 4 Standoffs
Gold plated contacts*
Tin-lead plated tails*
Part No. 1375791-1 (keyed), Part No. 1375791-2 (unkeyed)
Part No. 1375792-1 (keyed), Part No. 1375792-2 (unkeyed)
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375791-3 (keyed), Part No. 1375791-4 (unkeyed)
Matte tin plated tails**
Part No. 1375792-3 (keyed), Part No. 1375792-4 (unkeyed)
.435
[11.05]
.435
[11.05]
.600
[15.24]
Typ.
.600
[15.24]
Typ.
.100
[2.54]
.100
[2.54]
.119 .013
[3.03 0.34]
Typ.
Typ.
Typ.
.100
[2.54]
Typ.
.100
[2.54]
.483 .013
[12.27 0.34]
Typ.
Typ.
.025 Sq.
.195
3.21
[0.64] Typ.
[4.95]
Typ.
[81.60]
.195
[4.95]
Typ.
3.21
[81.60]
2.01
[51.11]
.390
[9.90]
Plugged
Circuit
2.01
[51.11]
.390
[9.90]
Plugged
Circuit
Plugged
Circuit
Breakaway Standoffs
Plugged
Circuit
Breakaway Standoffs
0.05
[1.27]
3.10
[78.74]
.300
[7.62]
0.05
[1.27]
3.10
[78.74]
.300
[7.62]
.125 Dia.
[3.18] 2 Plcs.
.125 Dia.
[3.18] 2 Plcs.
Keyed
Unkeyed
Recommended PC Board Layout
See Customer Drawing for
Hole Geometry and Recommended Plating.
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
7
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
PC/104-Plus, Press-Fit
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Contacts
Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000005 [0.000130]
min. Gold on remainder, all over .000050
[0.00127] Nickel
1
or
Phosphor Bronze; plated .000015 [0.00038]
min. Gold on mating receptacle end,
.000100-.000200 [0.000254-.00508] matte
tin on compliant section, .000005
{0.000130] min. Gold on remainder of post,
all over .000050 [0.00127] Nickel
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin or tin-lead on remainder, all over
.000050 [0.00127] Nickel
Screwlocks — Steel, Clear Chromate
over Zinc
Stackthrough, No Standoffs
Non-Stackthrough, No Standoffs
Gold plated contacts*
Tin-lead plated tails*
Part No. 1375799-1 (unkeyed)
Part No. 1375800-1 (unkeyed)
Part No. 1375799-2 (keyed-A1) per PC/104-Plus specification
Part No. 1375799-3 (keyed-D30) per PC/104-Plus specification
Part No. 1375800-2 (keyed-A1) per PC/104-Plus specification
Part No. 1375800-3 (keyed-D30) per PC/104-Plus specification
Gold plated contacts with Tin plated compliant pin section**
Part No. 1375799-4 (unkeyed)
Part No. 1375799-5 (keyed-A1) per PC/104-Plus specification
Part No. 1375799-6 (keyed-D30) per PC/104-Plus specification
Matte tin plated tails**
Part No. 1375800-4 (unkeyed)
Part No. 1375800-5 (keyed-A1) per PC/104-Plus specification
Part No. 1375800-6 (keyed-D30) per PC/104-Plus specification
.368
[9.35]
.368
[9.35]
.079
[2.00]
.079
Typ.
Typ.
.079
[2.00]
.020 Sq.
[0.51] Typ.
.079
[2.00]
Typ.
.112 .013
[2.85 0.34]
Typ.
Typ.
.483 .013
[12.27 0.34]
Typ.
[2.00]
Plugged
Circuit
(-3 or -6 only)
Plugged
Circuit
(-3 or -6 only)
.315
[8.00]
.315
[8.00]
Plugged
Circuit
(-2 or -5 only)
Plugged
Circuit
(-2 or -5 only)
.015
[0.39]
.015
[0.39]
2.37
[60.30]
2.37
[60.30]
.236
[6.00]
.236
[6.00]
.236
[6.00]
2.28
[58.0]
2.28
[58.0]
2.28
[58.0]
Recommended PC Board Layout
for 1375799-1, 1375799-4,
1375800-1, 1375800-4
Recommended PC Board Layout
for 1375799-2, 1375799-5,
1375800-2, 1375800-5
Recommended PC Board Layout
for 1375799-3, 1375799-6,
1375800-3, 1375800-6
See Customer Drawing for Hole Geometry and Recommended Plating.
(Including ENIG plated PCB's)
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
8
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
PC/104-Plus, Press-Fit (Continued)
.368
[9.35]
Non-Stackthrough, 2 Standoffs
Tin-lead plated tails*
.600
[15.24]
Typ.
Part No. 1375798-1 (unkeyed)
Part No. 1375798-2 (keyed-A1)
per PC/104-Plus specification
Part No. 1375798-3 (keyed-D30)
per PC/104-Plus specification
0.79
[2.00]
Typ.
.112 .013
[2.85 0.34]
Typ.
0.79
[2.00]
1
Typ.
Matte tin plated tails**
Plugged
Circuit
(-3 and -6 only)
Part No. 1375798-4 (unkeyed),
Part No. 1375798-5 (keyed-A1)
per PC/104-Plus specification
.315
[8.00]
Part No. 1375798-6 (keyed-D30)
per PC/104-Plus specification
Plugged
Circuit
2.37
[60.30]
.015
[0.39]
(-2 and -5 only)
Stackthrough, 2 Standoffs
Gold plated contacts*
Part No. 1375797-1 (unkeyed)
Part No. 1375797-2 (keyed-A1)
per PC/104-Plus specification
.600
[15.24]
Typ.
.368
[9.35]
.483 .013
[12.27 0.34]
Part No. 1375797-3 (keyed-D30)
per PC/104-Plus specification
Typ.
0.79
[2.00]
.020 Sq.
[0.51] Typ.
.079
[2.00]
Typ.
Typ.
Gold plated contacts with Tin
plated compliant pin section**
Part No. 1375797-4 (unkeyed)
Part No. 1375797-5 (keyed-A1)
per PC/104-Plus specification
Plugged
Circuit
(-3 and -6 only)
Part No. 1375797-6 (keyed-D30)
per PC/104-Plus specification
.315
[8.00]
Plugged
Circuit
(-2 and -5 only)
2.37
[60.30]
.015
[0.39]
Recommended PC Board Layout
Recommended PC Board Layout
for 1375797-2, 1375797-5,
1375798-2, 1375798-5
for 1375797-1, 1375797-4,
1375798-1, 1375798-4
Recommended PC Board Layout
for 1375797-3, 1375797-6,
1375798-3, 1375798-6
See Customer Drawing for
Hole Geometry and Recommended Plating.
Note: All part numbers are RoHS compliant.
* For RoHS exempt Tin-lead processes (including ENIG Plated PCB’s)
** for Silver Immersion processes or where a total lead free solution is desired
9
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
PC/104, Solder
.435
[11.05]
Material and Finish
Housing — Glass filled thermoplastic,
Black, 94V-0 rated
Non-Stackthrough, No Standoffs
Part No. 1375963-3 (keyed)
Part No. 1375963-4 (unkeyed)
Contacts
.100
[2.54]
Typ.
.100
[2.54]
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin on remainder, all over .000050
[0.00127] Nickel
Typ.
.119 .013
[3.03 0.34]
Typ.
1
3.21
[81.60]
.195
[4.95]
Typ.
2.01
[51.11]
.390
[9.90]
Plugged
Circuit
Screwlocks — Steel, Clear Chromate
over Zinc
Plugged
Circuit
3.10
[78.74]
3.10
[78.74]
.300
[7.62]
.300
[7.62]
Plated Through Hole
.041 .003 Dia.
[1.03 0.08] 102 Plcs.
Keyed
Unkeyed
Recommended PC Board Layout
Non-Stackthrough, 2 Standoffs
Non-Stackthrough, 4 Standoffs
Part No. 1375961-3 (keyed)
Part No. 1375961-4 (unkeyed)
Part No. 1375959-3 (keyed)
Part No. 1375959-4 (unkeyed)
.435
[11.05]
.435
[11.05]
.600
[15.24]
.600
[15.24]
Typ.
Typ.
.100
[2.54]
.100
[2.54]
.100
[2.54]
Typ.
.100
[2.54]
.119 .013
[3.03 0.34]
Typ.
Typ.
Typ.
Typ.
.119 .013
[3.03 0.34]
Typ.
3.21
[81.60]
.195
[4.95]
Typ.
.195
[4.95]
Typ.
3.21
[81.60]
.390
[9.90]
2.01
[51.11]
2.01
[51.11]
Plugged
Circuit
.390
[9.90]
Plugged
Circuit
Plugged
Circuit
Plugged
Circuit
Breakaway Standoffs
0.05
[1.27]
3.10
[78.74]
0.05
[1.27]
3.10
[78.74]
.300
[7.62]
.300
[7.62]
.125 Dia.
[3.18] 2 Plcs.
.125 Dia.
[3.18] 2 Plcs.
Plated Through Hole
.040 .003 Dia.
[1.01 0.08] 102 Plcs.
Unkeyed
Keyed
Recommended PC Board Layout
Note: All part numbers are RoHS compliant.
10
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
PC/104-Plus, Solder
Material and Finish
Non-Stackthrough, No Standoffs
Housing — Glass filled thermoplastic,
Part No. 1375967-4 (unkeyed)
Part No. 1375967-5 (keyed-A1)
per PC/104-Plus specification
Part No. 1375967-6 (keyed-D30)
per PC/104-Plus specification
Black, 94V-0 rated
Contacts
Non-Stackthrough — Phosphor Bronze;
plated .000015 [0.00038] min. Gold on
mating receptacle end, .000100 [0.00254]
matte tin on remainder, all over .000050
[0.00127] Nickel
.368
[9.35]
1
Screwlocks — Steel, Clear Chromate
over Zinc
.079
[2.00]
Typ.
.079
[2.00]
.112 .013
[2.85 0.34]
Typ.
Typ.
Plugged
Circuit
(-6 only)
.315
[8.00]
Plugged
Circuit
(-5 only)
.015
[0.39]
2.37
[60.30]
Plated Through Hole
.035 .003 Dia.
Plated Through Hole
.035 .003 Dia.
119 Plcs.
[0.88 0.08]
Plated Through Hole
.035 .003 Dia.
.236
[6.00]
.236
[6.00]
.236
[6.00]
119 Plcs.
[0.88 0.08]
120 Plcs.
[0.88 0.08]
2.28
[58.0]
2.28
[58.0]
2.28
[58.0]
Recommended PC Board Layout
for 1375967-4
Recommended PC Board Layout
for 1375967-5
Recommended PC Board Layout
for 1375967-6
.368
[9.35]
Non-Stackthrough, 2 Standoffs
.600
[15.24]
Part No. 1375965-4 (unkeyed)
Part No. 1375965-5 (keyed-A1)
per PC/104-Plus specification
Part No. 1375965-6 (keyed-D30)
per PC/104-Plus specification
Typ.
.079
[2.00]
.112 .013
[2.85 0.34]
Typ.
Typ.
0.79
[2.00]
Typ.
Plugged
Circuit
(-6 only)
.315
[8.00]
Plugged
Circuit
(-5 only)
2.37
[60.30]
.015
[0.39]
Plated Through Hole
.035 .003 Dia.
119 Plcs.
[0.88 0.08]
Recommended PC Board Layout for 1375965-4
Recommended PC Board Layout for 1375965-5
Plated Through Hole
.035 .003 Dia.
119 Plcs.
[0.88 0.08]
Note: All part numbers are RoHS
compliant.
Recommended PC Board Layout for 1375965-6
11
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Accessories
0.10
2.53
[64.36
Shroud, PC/104-Plus
Part No. 1375801-1
0.25
]
2.45
[62.34]
.010
0.25
.450
[11.43
]
Material — PBT, Black
1
.370
[9.41]
.039
[1.00]
.003
0.08
]
.440
[11.18
Typ.
.079
[2.00]
Typ.
.255
[6.47]
Typ.
.333
[8.46]
2.39
[60.76]
Organizer, PC/104
Part Number 1445251-1
3.21
[81.60]
.195
[4.95] Typ.
.05 [1.27] Typ.
.10 [2.54] Typ.
.10
[2.54] Typ.
Material — Polyester, PBT, Black
.390
[9.90]
.05
[1.27] Typ.
2.01
[51.11]
Kit Packaging
Part Numbers
Component Part Number
Connector Assembly
1375795-3
Part Number
Style
Organizer
1445441-3
1445441-4
1445440-3
1445440-4
1445439-3
1445439-4
1445251-1
1445251-1
1445251-1
1445251-1
1445251-1
1445251-1
Keyed
1375795-4
Unkeyed
Keyed
1375793-3
1375793-4
Unkeyed
Keyed
1375791-3
1375791-4
Unkeyed
Keyed
Circuits
Keyed
Keyed
Circuits
Circuits
Part No. 1445441-3
Part No. 1445440-3
Part No. 1445439-3
Note: All part numbers are RoHS compliant.
12
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
AMPMODU 50/50 Grid Connector System
Right-Angle Headers,
Board-to-Board (Page 19)
Vertical Headers,
Board-to-Board
(Page 16)
Receptacles,
Cable-to-Board,
With Latch
(Page 21)
2
Vertical Receptacles,
Board-to-Board
(Page 15)
Receptacles,
Cable-to-Board
Without Latch
(Page 21)
Vertical Headers,
Board-to-Board
(Page 16)
Vertical Headers,
Board-to-Board
(Page 16):
.250 [6.35] Stack Height
.320 [8.13] Stack Height
.390 [9.91] Stack Height
Vertical Receptacles,
Board-to-Board
(Page 15)
Produced under a Quality
Management System certi-
fied to ISO 9001
A copy of the
certificate is available
upon request.
13
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Board-to-Board Vertical Receptacles and Headers
Product Facts
I Surface-mount products for
parallel board-to-board
applications, as well as
right-angle board-to-board
and cable-to-board
applications
I High density .050 x .050
[1.27x1.27] centerline grid
I Three board-to-board stack
heights: .250 [6.35], .320
[8.13] and .390 [9.91]
I Non-protrusive metallic
2
holddowns
I Reliable dual beam
receptacle contacts for
redundant contact
I Duplex plated receptacle
and post contacts; gold
plated on mating areas,
tin plated on tails
I Compatible with standard
surface-mount processing
(VPR and IR)
I Receptacle and header allow
for drainage of processing
fluids
I Tape and reel packaging
available. Contact TE
for details
I Polarized header and recep-
tacle assemblies
I Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
for parallel board-to-board
stacking in high density
applications.
PC boards and allow
and packaging methods
result in a system that is
compatible with robotic
assembly.
surface mounting to both
sides of the board. In
addition to providing
retention during processing,
the holddowns are soldered
during reflow and therefore
provide long-term strain relief
for the solder joints.
The headers and
receptacles feature
polarization to prevent
misalignment.
Right-angle board-to-board
and cable-to-board
applications are also
possible, since the vertical
receptacles also mate with
non-latching right-angle
headers (page 19) and the
vertical headers also mate
with non-latching cable
connectors.
Three Board Stack Heights
AMPMODU 50/50 Grid
Vertical Headers and
Receptacles are designed
to be compatible with
standard surface-mount
processes; IR (infrared) and
VPR (vapor phase reflow).
The surface-mount
connectors have been
designed so that
dimensioning, tolerances,
referenced datums,
holddown characteristics
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
.250 .006
[6.35 0.15]
R
I Certified by
Canadian Standards
Association
File No. LR7189
Available are double row,
vertical shrouded headers
and receptacles in sizes
ranging from 10 through
100 positions (in 10 position
increments).
R
.320 .006
[8.13 0.15]
Parallel board-to-board
stack heights of .250 [6.35],
.320 [8.13] and .390 [9.91]
are achievable by selection
of the appropriate header.
The receptacle is the same
for all three stack height
headers.
Non-Protrusive
Metallic Holddowns
.390 .006
[9.91 0.15]
Non-protrusive metallic
holddowns are designed for
use in .062 [1.57] or thicker
14
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
AMPMODU Interconnection System
Board-to-Board Vertical Receptacles, Double Row, .050 x .050
[1.27 x 1.27] Centerline
A
.028
[0.71]
.120
[3.05]
.050
[1.27]
Material and Finish
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Polarizing Tab
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
(For Polarization to
Mating Header)
2
.187
[4.75]
.050
[1.27]
.050
[1.27]
Related Product Data
Mating Headers — pages 16, 19
PC Board Layouts — page 17
Performance Specifications —
page 24
Technical Documents — page 24
Product Specification 108-1332
Application Specification
Receptacle
114-7010
No. of
Pos.
Dimension
A
Part Numbers
Packaging: Tube or Tape and Reel
Tube
Tape and Reel*
No Hold Down w/Vacuum Cover
10
20
30
40
50
60
70
80
100
.266 [6.75]
.516 [13.11]
.766 [19.46]
1.016 [25.81]
1.266 [32.16]
1.516 [38.51]
1.766 [44.86]
2.016 [51.21]
2.516 [63.91]
5-104652-1
5-104652-2
5-104652-3
5-104652-4
5-104652-5
5-104652-6
5-104652-7
5-104652-8
6-104652-0
5-147384-1
5-147384-2
5-147384-3
5-147384-4
5-147384-5
5-147384-6
5-147384-7
5-147384-8
5-147384-9
5-147413-1
5-147413-3
5-147413-4
—
5-147413-2
—
—
—
—
* Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 17.
Note: All part numbers are RoHS compliant.
15
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Board-to-Board Vertical Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
.050
[1.27]
.225
[5.71]
.050
[1.27]
A
.2255
[5.728]
For .250 [6.35] Mated Height
2
.050
[1.27]
.030
[0.76]
A
For .320 [8.13] Mated Height
.2975
[7.557]
.050
[1.27]
.030
[0.76]
A
.3675
[9.335]
For .390 [9.91] Mated Height
.050
[1.27]
.030
[0.76]
Material and Finish
Related Product Data
Technical Documents — page 24
Product Specification 108-1332
Application Specification
114-7010
Housing—Glass-filled thermoplastic,
black, 94V-0 rated
Contacts—Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder tail,
with entire contact underplated .000050
[0.00127] nickel
Mating Receptacles — page 15, 21
(without latch only)
PC Board Layouts — page 17
Performance Specifications —
page 24
Packaging: Tube or Tape and Reel
Holddown—Copper alloy; plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
Header Part Numbers
.320 [8.13] Mated Height
No. of
Pos.
Dimension
A
.250 [6.35] Mated Height
Tape & Reel*
.390 [9.91] Mated Height
Tubes
Tubes
Tubes
Tape & Reel*
Tape & Reel*
Hold Down No Hold Down
Hold Down No Hold Down
10
20
30
40
50
60
70
80
90
100
.372 [9.44]
.622 [15.79]
.872 [22.14]
1.122 [28.49] 5-104655-5
1.372 [34.84] 5-104655-6
1.622 [41.19] 5-104655-7
1.872 [47.54] 5-104655-8
2.122 [53.89] 5-104655-9
5-104655-1
5-104655-3
5-104655-4
5-147381-1
5-147381-2
5-147381-3
5-147381-4
5-147381-5
5-147381-6
5-147381-7
5-147381-8
—
5-147121-1
5-104656-1
5-104656-2
5-104656-3
5-104656-4
5-104656-5
5-104656-6
5-104656-7
5-104656-8
5-104656-9
6-104656-0
5-147382-1
5-147382-2
5-147382-3
5-147382-4
5-147382-5
5-147382-6
5-147382-7
5-147382-8
—
5-104693-1
5-104693-2
5-104693-3
5-104693-4
5-104693-5
5-104693-6
5-104693-7
5-104693-8
5-104693-9
6-104693-0
—
5-147383-1
5-147383-2
5-147383-3
5-147383-4
5-147383-5
5-147383-6
5-147383-7
5-147383-8
—
5-147121-2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.372 [60.24]
2.622 [66.59] 6-104655-1
—
5-147381-9
5-147382-9
5-147503-1
5-147383-9
*Parts packaged in tape and reel have vacuum pick and place cover.
See PC Board Layout on page 17.
Note: All part numbers are RoHS compliant.
16
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Recommended PC Board Layouts for Vertical Connectors
Headers
.029
[0.74]
.050
[1.27]
B Spaces at .050 [1.27] = C
.162
[4.11]
.010
[0.25]
4 Plc.
C of Pattern
L
Detail A
.182
2
[4.62]
.091
[2.31]
.061
[1.54]
Detail A
D
Receptacles
.029
[0.74]
.050
[1.27]
.110
[2.79]
B Spaces at .050 [1.27] = C
C of Pattern
L
.130
[3.30]
.065
Detail A
[1.65]
.060
[1.52]
D
Receptacle Dimensions
C
Header Dimensions
No. of
Pos.
B
4
D
B
C
D
10
20
30
40
50
60
70
80
90
100
.200 [5.08]
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.200 [55.88]
2.450 [62.23]
.320 [8.12]
.570 [14.48]
.820 [20.83]
1.070 [27.19]
1.320 [33.53]
1.570 [39.88]
1.820 [46.23]
2.070 [52.58]
2.320 [58.93]
2.570 [65.28]
4
.200 [5.08]
.322 [8.17]
9
9
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.200 [55.88]
2.450 [62.23]
.572 [14.52]
.822 [20.87]
1.072 [27.22]
1.322 [33.57]
1.572 [39.92]
1.822 [46.27]
2.072 [52.62]
2.322 [58.97]
2.572 [65.32]
14
19
24
29
34
39
44
49
14
19
24
29
34
39
44
49
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
Note: All part numbers are RoHS compliant.
17
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Board-to-Board Right-Angle Headers
Product Facts
I Surface-mount products for
right-angle board-to-board
and cable-to-board
applications
I Double-row, right-angle
shrouded headers
I High density .050 x .050
[1.27 x 1.27] centerline grid
I Latching and non-latching
versions available
I Non-protrusive metallic
2
holddowns
I Metallic tabs, when
soldered to PC board pad,
provide added mechanical
support
I Duplex plated post contacts;
gold plated on mating area,
tin plated on tails
I Compatible with standard
surface-mount processing
(VPR and IR)
I Standoffs on header
housings allow for drainage
of processing fluids
I All headers are polarized
I Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
AMPMODU 50/50 Grid
Right-Angle Headers will
accommodate a variety of
high density packaging
applications; right-angle
board-to-board applications
when mated with vertical
receptacles (page 15) and
right-angle cable-to-board
applications when mated
with cable connectors
(page 21). The small
design as those used in the
vertical headers (page 16)
and receptacles (page 15).
There are also metallic tabs
that are soldered to the sur-
faces of the PC board pads
for added support.
I Recognized under the
Component Program of
Underwriters
AMPMODU 50/50 Grid
Right-Angle Headers are
available in double-row, in
either latching or non-
latching versions, and in
sizes ranging from 10
through 100 positions (in 10
position increments). The
latching version provides
positive retention when
mated with the latching
cable connector (page 21).
All headers feature polariza-
tion to help prevent mis-
alignment during mating.
R
Laboratories Inc.,
File No. E28476
I Certified by Canadian
Standards
.050 x .050 [1.27 x 1.27]
centerline contact spacing
allows efficient use of the
PC board area.
Association
R
File No. LR7189
Mechanical support of the
headers to the PC board is
provided by non-protrusive
metallic holddowns
designed for .062 [1.57] or
thicker PC boards. These
holddowns are of the same
18
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
AMPMODU Interconnection System
Board-to-Board Right-Angle Headers, Double Row, .050 x .050
[1.27 x 1.27] Centerline
Non-Latching Header
A
.050
[1.27]
Typ.
.050
[1.27]
.213
[5.41]
Latching Header
.352
[8.94]
.050
[1.27]
2
.430
[10.92]
.029
[0.74]
Typ
.047
[1.19]
Plated-Thru Hole
(2 Plc)
Dia
Material and Finish
.065
[1.65]
Typ.
B Spaces at
Housing — Liquid crystal polymer,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.000381] tin on
solder tail, with entire contact under-
plated .000050 [0.00127] nickel
.025
[0.64]
= C
.140
[3.56]
.085
[2.16]
.340
[8.64]
.305
[7.75]
Holddown — Copper alloy; plated
.0000150 [0.00381] tin over .000050
[0.00127] nickel
.190
[4.83]
(2 Plc)
.175
[4.45]
.063
[1.57]
(2 Plc)
.100
[2.54]
Min
.136
[3.45]
(2 Plc)
Related Product Data
Mating Receptacles — page 15, 21
D
Performance Specifications —
Recommended PC Board Layout
Note: Refer to TE Customer
Drawings for additional PC board
layout information and dimensional
tolerances.
page 24
Technical Documents — page 24
Product Specification 108-1443
Application Specification
114-7010
Header
Part Numbers
Packaging: Tube
Dimensions
No. of
Pos.
A
B
C
D
Latching
5-104895-1
5-104895-2
5-104895-3
5-104895-4
5-104895-5
5-104895-6
5-104895-7
5-104895-8
6-104895-0
Non-Latching
5-104894-1
5-104894-2
5-104894-3
5-104894-4
5-104894-5
5-104894-6
5-104894-7
5-104894-8
6-104894-0
10
20
30
40
50
60
70
80
100
.630 [16.00]
.880 [22.35]
1.130 [28.70]
1.380 [35.05]
1.630 [41.40]
1.880 [47.75]
2.130 [54.10]
2.380 [60.45]
2.880 [73.15]
9
.225 [5.72]
.475 [12.07]
.725 [18.42]
.975 [24.77]
1.225 [31.12]
1.475 [37.47]
1.725 [43.82]
1.975 [50.17]
2.475 [62.87]
.550 [13.97]
.800 [20.32]
1.050 [26.67]
1.300 [33.02]
1.550 [39.37]
1.800 [45.72]
2.050 [52.07]
2.300 [58.42]
2.800 [71.12]
19
29
39
49
59
69
79
99
Note: All part numbers are RoHS compliant.
19
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Cable-to-Board Connectors
Product Facts
I Double-row receptacle
connectors provide cable-
to-board connection
capabilities for vertical
headers (non-latching) and
right-angle headers
(latching and non-latching)
I IDC (Insulation
Displacement Crimp) mass
termination of solid or
stranded round conductor
.050 [1.27] centerline
ribbon cable with PVC or
polyethylene insulation
I Accommodates ribbon cable
conductor sizes of 28 AWG
[0.08-0.09 mm2] and 30
AWG [0.05 mm2] and
2
insulation diameters up to
.036 [0.91] maximum
I Reliable single beam
receptacle contact design
I Duplex plated receptacle
contacts; gold plated in
mating area, tin in
These double-row cable
connectors, with a .050 x
.050 [1.27 x 1.27] centerline
contact spacing, provide
cable-to-board connection
capabilities for the
stranded round conductor
mounted right-angle header.
termination area
ribbon cable with conductor The cable connector without
I Terminating covers (sold
separately) provide both
strain relief and protection
to the termination area
I Sizes of 10, 20, 30, 40, 50,
60, 70, 80 and 100 positions
I Connectors available with or connectors without a latch
without metal latch
I Connectors without latches
are polarized to help
prevent mismating
sizes of 28 AWG [0.08-0.09
mm2] and 30 AWG [0.05
mm2] and a maximum
insulation diameter of .036
[0.91]. During termination,
the terminating covers,
which must be purchased
separately, assist in guiding
the wire into the IDC
contacts, then provide
strain relief when fully
seated. Actual termination
is accomplished with the
TE manual tooling shown on
page 23.
a metal latch features
polarization to help prevent
mismating. All connectors
are available in sizes
ranging from 10 through
100 positions (in 10 position
increments).
AMPMODU 50/50 Grid
Connector System. Cable
will mate with the vertical
headers (page 16), while
cable connectors with or
without a latch can be used
to mate with the right-angle
headers (page 19).
I Recognized under the
Component Program of
Underwriters
The cable connectors
feature reliable single-
beam IDC (insulation
displacement crimp)
contacts which are duplex
plated with .000030
[0.00076] gold. These
contacts can be mass
terminated to either solid or
Laboratories Inc.,
File No. E28476
R
The latching version of the
cable connector is
equipped with a metal latch
which provides positive
retention of the receptacle
cable connector when
mated with a surface-
I Certified by Canadian
Standards
R
Association
File No. LR7189
20
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Cable-to-Board Receptacle Connectors, Double Row, .050 x .050
[1.27 x 1.27] Centerline
A
Material and Finish
Housing — Thermoplastic, black,
2
94V-0 rated
Latch — Stainless steel
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] minimum
gold in mating area, .000150 [0.00381]
minimum tin on solder tail, with entire
contact underplated .000050 [0.00127]
minimum nickel
.280
[7.11]
.627
[15.94]
.690
[17.56]
Related Product Data
Mating Headers — page 16, 19
(latching)
D
Terminating Covers (Must be
Purchased Separately, 2 Required
per Connector) — page 22
.120
[3.05]
Termination Tooling — page 23
Performance Specifications —
page 24
.050
[1.27]
Typ
B Spaces at
.050 [1.27] = C
Technical Documents — page 24
Product Specification 108-1443
Application Specification
408-9817, 408-9909
.284 .327
[7.21] [8.31]
.050
[1.27]
Packaging: Tube
Receptacle
Dimensions
No. of
Pos.
Part Numbers
A
B
C
D
With Latch
Without Latch
5-104893-1
5-104893-2
5-104893-3
5-104893-4
5-104893-5
5-104893-6
5-104893-7
5-104893-8
6-104893-0
10
20
30
40
50
60
70
80
100
.578 [14.68]
.828 [21.03]
1.078 [27.38]
1.328 [33.73]
1.578 [40.08]
1.828 [46.43]
2.078 [52.78]
2.328 [59.13]
2.828 [71.83]
4
9
.200 [5.08]
.450 [11.43]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.700 [43.18]
1.950 [49.53]
2.450 [62.23]
.266 [6.76]
.516 [13.11]
.766 [19.46]
1.016 [25.81]
1.266 [32.16]
1.516 [38.51]
1.766 [44.86]
2.016 [51.21]
2.516 [63.91]
5-104892-1
5-104892-2
5-104892-3
5-104892-4
5-104892-5
5-104892-6
5-104892-7
5-104892-8
6-104892-0
14
19
24
29
34
39
49
Note: All part numbers are RoHS compliant.
21
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Terminating Covers for Cable Connectors
Material
Glass-filled thermoplastic,
black, 94V-0 rated
A
2
.191
[4.85]
Related Product Data
Connectors used with Covers —
page 21
Termination Tooling — page 23
Technical Documents — page 24
Product Specification 108-1443
.277
[7.04]
Application Specification
408-9817, 408-9909
Packaging: Plastic bag
No. of
Pos.
Dimension
A
Terminator Cover
Part Numbers
10
20
.565 [14.35]
.815 [20.70]
1.065 [27.05]
1.315 [33.82]
1.565 [39.75]
1.815 [46.10]
2.065 [52.45]
2.315 [58.80]
2.815 [71.50]
104891-1
104891-2
104891-3
104891-4
104891-5
104891-6
104891-7
104891-8
1-104891-0
30
40
50
60
70
80
100
Note: Terminating covers must be purchased separately, two are required for
each cable connector.
Note: All part numbers are RoHS compliant.
22
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Application Tooling for Cable Connectors
The Manual Miniature
Application Frame
Assembly 91295-1,
equipped with a Cover
Closing Kit 543518-1, is
used for the IDC termina-
tion of ribbon cable to the
cable connectors shown on
page 21.
Prior to termination, the
covers must be partially
assembled onto a connec-
tor housing, the cable
inserted between the cov-
ers and contacts and the
covers preclosed by hand,
clamping the cable in
place.
2
In the Manual Miniature
Application Frame
Assembly, the covers are
fully seated to complete the
mass termination and pro-
vide strain relief for the
completed connection.
Manual Miniature Application Frame Assembly 91295-1
with Cover Closing Kit 543518-1
For tooling information, call
Technical Support Center
1-800-522-6752.
Note: Refer to Tyco Electonics
Instruction Sheets 408-9817 (Frame
Assembly 91295-1) and 408-9909
(Cover Closing Kit 543518-1) for
complete termination/tooling infor-
mation.
Note: All part numbers are RoHS compliant.
23
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Performance Specifications
Board-to-Board Connectors, Vertical and Right-Angle
Mating Force: 6.4 oz (1.78 N] max. per contact
Unmating Force: 1.0 oz [0.28 N] min. per contact
Durability: Tested to 200 cycles min.
Current Rating: (30°C T rise): .5 ampere per contact
Operating Temperature Range: -65°C to +105°C
Termination Resistance: 16 milliohms max. (initial)
Insulation Resistance: 5000 megohms min. (initial)
Dielectric Withstanding Voltage: 300 VAC
Cable-to-Board Connectors
2
Mating Force: 6.4 oz (1.78 N] max. per contact
Unmating Force Without Latch: .5 oz [0.14 N] min. per contact
Durability: Tested to 200 cycles min.
Current Rating: (10°C T rise): .5 ampere per contact
Operating Temperature Range: -65°C to +105°C
Termination Resistance: 25 milliohms max. (initial and final)
Insulation Resistance: 5000 megohms min. (initial)
Dielectric Withstanding Voltage: 300 VAC
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-1332
108-1443
AMPMODU 50/50 Grid Vertical Board-to-Board Connectors
AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable
Connectors
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-7010
AMPMODU 50/50 Grid Connector System
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-9817
408-9909
Manual Miniature Application Frame Assembly 91295-1
Cover Closing Kit 543518-1
Note: All part numbers are RoHS compliant.
24
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMPMODU System 50 Connectors
3
The AMPMODU System 50
connector family includes a
wide variety of high density
board-to-board (thru-hole
and surface-mount) and
cable-to-board connectors.
AMPMODU System 50 is
composed of one- and two-
row receptacles and post
headers on .050 x .100
[1.27 x 2.54] spacing
Board-mounted thru-hole
post headers and
receptacle connectors are
available for right-angle
and vertical mating
mating headers (thru-hole or
I
Recognized under the
Component Program of
Underwriters
surface-mount). Ribbon
cable connectors mass
terminate 30 AWG [0.05
mm2] solid and 32 AWG
[0.03 mm2] stranded, .025
[0.64] centerline ribbon
cable with PVC or Teflon®
insulation.
R
Laboratories Inc.
File No. E28476
configurations. Surface-
mounted connectors are
available in vertical, double
row styles for parallel
I Certified by
Canadian Standards
Association*,
File No. LR 7189
stacking applications.
*CSA certification pending on
certain products, as noted.
Connectors for mass
R
Shrouded post headers
provide polarization to
mating cable receptacles
and aid alignment of mating
connectors. Unshrouded
headers allow close
termination to FFC cable or
flexible etched circuitry
have dual beam contacts;
options include shielded
cable and solder tabs. Both
types of cable connectors
are available as component
parts and as completed
assemblies.
between contacts for
Dimensioning:
extreme density and
efficient use of printed
circuit board area.
Dimensions are in inches and millimeters.
Values in brackets are metric equivalents. Metric
symbols used are:
mm (millimeter)
cm (centimeter)
m (meter)
AMPMODU System 50
receptacles and header
assemblies can be
categorized in three groups:
board-mount headers,
board-mount receptacles
and cable-to-board
receptacles. Receptacle
contacts and mating .015
[0.38] square posts are
formed from high
conductivity copper alloy
and are selectively plated
with gold to promote higher
performance and reliability.
mm2 (square millimeter)
C (Celsius)
stacking of daughter cards.
Vertical stacking connectors
space parallel mated
N (newton)
kg (kilogram)
boards as shown in the
illustration on page 63.
Housings on all board-
mount assemblies are made
of high temperature tolerant
materials and incorporate
stand-offs for free drainage
of flux cleaning solutions.
I Produced under a
Quality Management
System certified
to ISO 9001
The variety of components
and application possibilities,
combined with small size
and outstanding quality,
make AMPMODU
System 50 suitable for high
density systems.
A copy of the
certificate is available
upon request.
Cable-to-board connectors
have integral latches for
positive locking to shrouded
Teflon® is a trademark of E.I. du Pont de
Nemours and Company.
25
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Product Facts
I High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
I Single row; select sizes 4
thru 50 positions
I Double row; select sizes 10
thru 100 positions
I Stand-offs for ease of
cleaning
I High temperature tolerant
thermoplastic housings
I Shrouded and unshrouded
headers available in single
and double row, vertical
and right-angle
configurations
3
The AMPMODU System 50
interconnection system is
designed to better meet
industry’s need for a high
density interconnect
efficient use of printed
circuit board area. The
headers are available in
4 through 50 positions, in
a single row configuration,
and 10 through 100
circuit boards and cable
connectors, while
unshrouded headers allow
close stacking of daughter
cards. Housings for the
headers are made of black
thermoplastic material with
a 94V-0 rating. The
housings have stand-offs
for free drainage of flux
cleaning solutions.
system. The Board
Mounted Thru-Hole
positions, in a double row
design.
Headers are available in
shrouded and unshrouded
versions. They are
Board mounted post
headers are available in
right-angle and vertical
configurations. Shrouded
post headers provide
composed of single and
double row post headers
with .050 x .100
[1.27 x 2.54] spacing
between contacts for
extreme density and
polarization and alignment
features for mating printed
26
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Right-Angle
with Solder Clips
Solder
Clip
Circuit Identification
Feature*
.100
[2.54]
.060
[1.52]
2 Plc.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
See Note 2.
See Note 1.
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 38,
49 & 50
No. of
Pos.
Dimension
PC Board Hole Layout — page 41
Part Numbers
A
4
.330 [8.38]
.380 [9.65]
5-104074-7
5-104074-2
5-104074-8
6-104074-0
5-104074-1
6-104074-1
5-104074-3
5-104074-4
6-104074-4
5-104074-5
7-104074-0
5-104074-6
6-104074-6
6-104074-7
6-104074-8
6-104074-9
5
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
6
.430 [10.92]
.530 [13.46]
.630 [16.00]
.730 [18.54]
.880 [22.35]
1.130 [28.70]
1.230 [31.24]
1.380 [35.05]
1.530 [38.86]
1.630 [41.40]
1.930 [49.02]
2.130 [54.10]
2.380 [60.45]
2.630 [66.80]
8
10
12
15
20
22
25
28
30
36
40
45
50
*Circuit identification feature omitted on 4, 5 and 6 position headers.
Notes:
1. Solder Clips located as shown for 10 through 30 position headers.
2. Solder Clips located as shown for 4 through 8 and 36 through 50 position headers.
Note: All part numbers are RoHS compliant.
27
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Vertical
Circuit Identification
.060 [1.52]
Feature*
2 Plc.
Material and Finish
Housing — Glass-filled thermoplastic,
Post Length
(See chart
below)
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .00050 [0.00127] nickel
3
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 38,
49 & 50
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Part Numbers
Post Length
No. of
Pos.
Dimension
A
.100 [2.54]
5-104071-7
5-104071-2
5-104071-8
6-104071-0
5-104071-1
6-104071-1
6-104071-2
5-104071-3
6-104071-3
5-104071-4
6-104071-4
5-104071-5
5-104071-6
6-104071-6
6-104071-7
6-104071-9
.145 [3.68]
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
4
.330 [8.38]
.380 [9.65]
—
5
—
6
.430 [10.92]
.530 [13.46]
.630 [16.00]
.730 [18.54]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.130 [28.70]
1.230 [31.24]
1.380 [35.05]
1.630 [41.40]
1.930 [49.02]
2.130 [54.10]
2.630 [66.80]
—
8
—
10
12
13
15
17
20
22
25
30
36
40
50
—
5-104804-3
—
5-104804-2
—
—
—
—
—
—
—
—
*Circuit identification feature omitted on 4, 5, and 6 position headers.
Note: All part numbers are RoHS compliant.
28
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
with Solder Clips
.060
[1.52]
2 Plc.
Circuit Identification
Feature*
Solder
Clip
Post Length
(See chart
below)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
PC Board Hole Layout — page 41
See Note 2.
See Note 1.
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Part Numbers
No. of
Pos.
Dimension
A
Post Length
.100 [2.54]
5-104069-8
5-104069-4
—
.145 [3.68]
—
8
10
12
14
16
20
24
26
30
34
40
50
60
68
72
80
100
.330 [8.32]
.380 [9.65]
6-104477-2
5-104477-8
—
.430 [10.92]
.480 [12.19]
.530 [13.46]
.630 [16.00]
.730 [18.54]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.130 [28.70]
1.380 [35.05]
1.630 [41.40]
1.830 [46.48]
1.930 [49.02]
2.130 [54.10]
2.630 [66.80]
6-104069-0
6-104069-1
5-104069-1
6-104069-2
6-104069-3
5-104069-5
6-104069-4
5-104069-6
5-104069-2
5-104069-7
6-104069-8
6-104069-6
5-104069-3
6-104069-7
—
5-104477-2
6-104477-0
—
5-104477-3
—
5-104477-4
5-104477-5
5-104477-9
—
5-104477-1
5-104477-6
5-104477-7
*Circuit identification feature omitted on 8, 10 and 12 position headers.
Notes:
1. Solder Clips located as shown for 16 through 100 position headers.
2. Solder Clips located as shown for 8 through 12 and 60 through 100 position headers.
Note: All part numbers are RoHS compliant.
29
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
.060 [1.52]
2 Plc.
Circuit Identification
Feature*
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contact — Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127]nickel
3
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 40,
Post Length
(See chart
below)
45, 51, 52, & 56
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Part Numbers
Post Length
Application Specification
114-25031
No. of
Pos.
Dimension
A
.100 [2.54]
5-104068-2
5-104068-8
5-104068-9
6-104068-0
5-104068-1
6-104068-1
6-104068-2
5-104068-3
6-104068-3
5-104068-4
6-104068-4
5-104068-5
5-104068-6
6-104068-8
6-104068-5
6-104068-6
6-104068-7
.145 [3.68]
—
10
12
14
16
20
24
26
30
34
40
44
50
60
68
72
80
100
.380 [9.65]
.430 [10.92]
.480 [12.19]
.530 [13.46]
.630 [16.00]
.730 [18.54]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.130 [28.70]
1.230 [31.24]
1.380 [35.05]
1.630 [41.40]
1.830 [46.48]
1.930 [49.02]
2.130 [54.10]
2.630 [66.80]
—
—
5-104666-9
5-104666-1
6-104666-0
—
5-104666-2
—
5-104666-3
—
5-104666-4
5-104666-7
5-104666-8
—
5-104666-5
5-104666-6
*Circuit identification feature omitted on 10 and 12 position headers.
Note: All part numbers are RoHS compliant.
30
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
With Card Slots
Circuit Identification
Feature
.125
[3.18]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
3
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — page 39
PC Board Hole Layout — page 41
No. of
Pos.
Dimension
A
Part
Numbers
10
20
30
40
50
60
80
100
.394 [10.01]
.644 [16.36]
.894 [22.71]
1.144 [29.06]
1.394 [35.41]
1.644 [41.76]
2.144 [54.46]
2.644 [67.16]
5-104076-5
5-104076-1
5-104076-6
5-104076-3
5-104076-7
5-104076-2
5-104076-4
5-104076-8
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Note: All part numbers are RoHS compliant.
31
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Single Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 37,
38, 49, & 50
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
Dimension
A
Part
Numbers
4
.215 [5.46]
.415 [10.54]
.615 [15.62]
.765 [19.43]
.865 [21.97]
1.015 [25.78]
1.265 [32.13]
1.515 [38.48]
1.565 [39.75]
2.015 [51.18]
5-104186-1
5-104186-5
5-104186-7
5-104186-9
6-104186-0
6-104186-1
6-104186-3
6-104186-5
7-104186-0
6-104186-7
8
12
15
17
20
25
30
31
40
Note: All part numbers are RoHS compliant.
32
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
.125
[3.18]
Single Row, Vertical
.015
[0.38]
.100
[2.54]
.096
[2.44]
.050
[1.27]
Typ.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
A
.100
[2.54]
.048
[1.22]
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 37,
38, 49, & 50
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
No. of
Pos.
4
6
Dimension
Part
Numbers
A
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
.215 [5.46]
.315 [8.00]
.415 [10.54]
.515 [13.08]
1.015 [25.78]
1.265 [32.13]
5-104178-1
5-104178-3
5-104178-5
5-104178-6
6-104178-1
6-104178-3
8
10
20
25
Note: All part numbers are RoHS compliant.
33
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 39,
40, 45, 51 & 52
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
No. of
Pos.
Dimension
A
Part
Numbers
Application Specification
114-25031
10
20
30
40
50
60
80
100
.265 [6.73]
.515 [13.08]
.765 [19.43]
1.015 [25.78]
1.265 [32.13]
1.515 [38.48]
2.015 [51.18]
2.515 [63.88]
5-104118-3
5-104118-7
6-104118-0
6-104118-2
5-104118-1
6-104118-4
6-104118-6
6-104118-7
Note: All part numbers are RoHS compliant.
34
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
.125
[3.18]
.100
[2.54]
.015
[0.38]
.050
.100
Typ.
[1.27]
[2.54]
.196
[4.98]
.100
[2.54]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
.048
[1.22]
3
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 39,
40, 45, 51, & 52
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 42
No. of
Pos.
Dimension
A
Part
Numbers
8
20
30
36
40
50
60
80
100
.215 [5.46]
.515 [13.08]
.765 [19.43]
.915 [23.24]
1.015 [25.78]
1.265 [32.13]
1.515 [38.48]
2.015 [51.18]
2.515 [63.88]
5-103916-3
5-103916-2
5-103916-9
6-103916-8
6-103916-1
6-103916-3
6-103916-4
6-103916-6
6-103916-7
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Note: All part numbers are RoHS compliant.
35
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Product Facts
I High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
I Right-angle and vertical
styles
I Single row; select sizes 5
thru 50 positions
I Double row; select sizes 10
thru 100 positions
I Contacts are selectively
plated with gold
I Stand-offs for removal of
solder flux
3
The AMPMODU System 50
thru-hole receptacles offer
a wide variety of high
density board-to-board
connectors. The .050 [1.27]
spacing between each
contact provides an
Receptacle contacts and
mating .015 [0.38] square
posts are formed from high
conductivity copper alloy
and are selectively plated
with gold for higher
performance and reliability.
The receptacle housings
are made of black
extremely dense
interconnect package and
results in a more efficient
use of the printed circuit
board space.
thermoplastic, with a 94V-0
rating to withstand high
temperatures of reflow
soldering and incorporate
stand-offs for free drainage
of flux cleaning solutions.
AMPMODU System 50
thru-hole receptacles are
available in right-angle and
vertical configurations and
are composed of single
and double row versions.
The single row versions are
available in select sizes of
5 thru 50 positions and
double row in positions
from 10 thru 100.
36
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Right-Angle
With Solder Clips
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Solder
Clip
3
See Note 2.
See Note 1.
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 32
& 33
PC Board Hole Layout — page 41
No. of
Pos.
Dimension
A
Part
Numbers
10
15
20
.544 [13.82]
.794 [20.17]
1.044 [26.52]
5-104196-2
5-104196-4
5-104196-5
Technical Documents — page 64
Product Specification 108-1093
Notes:
Application Specification
114-25031
1. Solder Clips located as shown for 10 through 25 position receptacles.
2. Solder Clips located as shown for 5 and 25 position receptacles.
Note: All part numbers are RoHS compliant.
37
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Vertical
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
3
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
No. of
Pos.
Dimension
A
Part
Numbers
Mateable Connectors — pages 27,
28, 32, & 33
10
12
15
20
30
.544 [13.82]
.644 [16.35]
.794 [20.17]
1.044 [26.52]
1.544 [39.22]
5-104192-2
5-104192-3
5-104192-4
5-104192-5
5-104192-7
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Note: All part numbers are RoHS compliant.
38
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Solder
Clip
Related Product Data
See Note 2.
See Note 1.
Performance Characteristics —
page 63
Mateable Connectors — pages 31,
34 & 35
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
Dimension
A
Part
Numbers
10
20
30
40
50
60
80
100
.294 [7.47]
.544 [13.82]
.794 [20.17]
1.044 [26.52]
1.294 [32.87]
1.544 [39.22]
2.044 [51.92]
2.544 [64.62]
5-103911-1
5-103911-2
5-103911-7
5-103911-5
5-103911-4
5-103911-3
5-103911-6
5-103911-8
Notes:
1. Solder Clips located as shown for 20 through 100 position receptacles.
2. Solder Clips located as shown for 10, 60, 80 and 100 position receptacles.
Note: All part numbers are RoHS compliant.
39
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
Post Length
(See chart
below)
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 29,
30, 34, 35 & 44
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Part Numbers
Post Length
No. of
Pos.
Dimension
A
.100 [2.54]
5-104078-3
5-104078-1
5-104078-9
5-104078-4
6-104078-0
5-104078-2
5-104078-5
5-104078-6
6-104078-3
5-104078-7
5-104078-8
.145 [3.68]
10
20
24
30
34
40
50
60
68
80
100
.294 [7.47]
.544 [13.82]
.644 [16.36]
.794 [20.17]
.894 [22.71]
1.044 [26.52]
1.294 [32.87]
1.544 [39.22]
1.744 [44.30]
2.044 [51.92]
2.544 [64.62]
—
—
—
—
—
—
5-104744-7
—
—
5-104744-4
5-104744-5
Note: All part numbers are RoHS compliant.
40
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Recommended PC Board Hole Layouts, Thru-Hole Board-to-Board Connectors
Single Row, Right-Angle
with Solder Clips
.022 Dia.
[0.56] Typ.
Plated-Thru Hole
Note: Consult TE for customer
drawings detailing tolerances.
.037 Dia.
[0.94] Typ.
(Soldered
mechanical
.335**
[8.51]
solder clip)
Plated-Thru
Hole
* This dimension is for Shrouded,
Single Row Right-Angle Headers
only.
PC Board Edge
Dimensions
No. of
Pos.
** This dimension is for Single Row
Right-Angle Receptacles only.
B
C
D
E
4
.150 [3.81]
.200 [5.08]
.250 [6.35]
.350 [8.89]
—
.075 [1.91]
.100 [2.54]
.125 [3.18]
.175 [4.45]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
—
5
—
—
6
—
—
8
—
—
10
12
15
20
22
25
28
30
36
40
45
50
.450 [11.43]
.550 [13.97]
.700 [17.78]
.950 [24.13]
1.050 [26.67]
1.200 [30.48]
1.350 [34.29]
1.450 [36.83]
1.750 [44.45]
1.950 [49.53]
2.200 [55.88]
2.450 [62.23]
.350 [8.89]
.450 [11.43]
.600 [15.24]
.850 [21.59]
.950 [24.13]
1.100 [27.94]
1.250 [31.75]
1.350 [34.29]
1.650 [41.91]
1.850 [46.99]
2.100 [53.34]
2.350 [59.69]
—
—
—
3
—
—
—
.625 [15.88]
.675 [17.15]
.825 [20.96]
.925 [23.50]
1.050 [26.67]
1.175 [29.85]
Double Row, Right-Angle
with Solder Clips
.022 Dia.
[0.56] Typ.
Plated-Thru Hole
Note: Consult TE for customer
drawings detailing tolerances.
.037 Dia.
[0.94] Typ.
(Soldered mechanical
solder clip)
Plated-Thru Hole
* This dimension is for Shrouded,
Double Row Right-Angle Headers
only.
PC Board Edge
** This dimension is for Double Row
Right-Angle Receptacles only.
Dimensions
No. of
Pos.
B
C
D
E
10
20
24
26
30
34
40
50
60
68
72
80
100
.200 [5.08]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.650 [41.91]
1.750 [44.45]
1.950 [49.53]
2.450 [62.23]
—
.100 [2.54]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
—
.350 [8.89]
.450 [11.43]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.850 [21.59]
1.100 [27.94]
1.350 [34.29]
1.550 [39.37]
1.650 [41.91]
1.850 [46.99]
2.350 [59.69]
—
—
—
—
—
—
—
.675 [17.15]
.775 [19.69]
.825 [20.96]
.925 [23.50]
1.175 [29.85]
41
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Recommended PC Board Hole Layouts, Thru-Hole
Board-to-Board Connectors (Continued)
Single Row
Without Solder Clips
.022 Dia.
[0.56] TYP.
Plated-Thru Hole
Note: Consult TE for customer
drawings detailing tolerances.
No. of
Pos.
Dimension
B
No. of
Pos.
Dimension
B
4
5
.150 [3.81]
.200 [5.08]
.250 [6.35]
.350 [8.89]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
17
20
22
25
30
31
36
40
50
.800 [20.32]
.950 [24.13]
1.050 [26.67]
1.200 [30.48]
1.450 [36.83]
1.500 [38.10]
1.750 [44.45]
1.950 [49.53]
2.450 [62.23]
6
8
10
12
13
15
3
Double Row
Without Solder Clips
.022 Dia.
[0.56] TYP.
Plated-Thru
Hole
Note: Consult TE for customer
drawings detailing tolerances.
No. of
Pos.
Dimension
No. of
Pos.
Dimension
B
B
8
.150 [3.81]
.200 [5.08]
.250 [6.35]
.300 [7.62]
.350 [8.89]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
.800 [20.32]
36
40
44
50
60
68
72
80
100
.850 [21.59]
.950 [24.13]
1.050 [26.67]
1.200 [30.48]
1.450 [36.83]
1.650 [41.91]
1.750 [44.45]
1.950 [49.53]
2.450 [62.23]
10
12
14
16
20
24
26
30
34
42
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Surface-Mount Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Product Facts
I Surface-mount option for
parallel board-to-board
applications; completely
intermateable with
AMPMODU System 50
thru-hole board-to-board
and cable-to-board systems
I Double row, vertical,
shrouded header and
receptacle assemblies
I Available in select sizes
from 10 through 100
positions
I High Density; contacts
spaced on .050 x .100 [1.27
x 2.54] centers; compact
footprint
I Compatible with standard
3
surface-mount processes
I Stand-offs for free drainage
of flux cleaning solutions;
visible solder joints for easy
inspection
I Simple, low insertion-force
holddown for process
retention and long-term
strain relief for solder joints
I Available in tape and reel
packaging (with vacuum
covers) for automatic
placement.
The high-density surface-
mount connector is another
mounting option in the
AMPMODU System 50
connector family.
The surface-mount system
includes double row,
vertical, shrouded header
and receptacle assemblies
in select sizes from 10
through 100 positions. It
meets the tight dimensional
requirements of surface-
mount technology. The
simple, low insertion-force
holddown provides both
processing retention and
long-term strain relief for
the solder joints in the
This surface-mount system
is fully intermateable with
the AMPMODU System 50
thru-hole and cable-to-
board connectors.
Additionally, the design of
the mating interface has not
been changed, maintaining
the same high reliability as
the thru-hole product.
headers and receptacles.
43
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Surface-Mount Headers, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
.045
[1.14]
Ref.
Double Row, Vertical
.125
[3.18]
.284
[7.21]
.100
[2.54]
.344 [8.74]
.050
[1.27] Typ.
.031 .010
[.79 .25]
A
[.08]
.003
.057 .010
[1.45 .25]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact under-
plated .000050 [0.00127] nickel
Holddown — Copper alloy, plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
.435 .007
[11.05 .18]
.042 .003
[1.07 0.08] Dia. Typ.
(Plated-Thru Hole)
3
Detail A
.053 .006
[1.35 0.15]
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
Board-to-Board Spacing — page 63
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25035
Holes for holddowns are not
required for parts packaged
in tape and reel.
Recommended PC Board Layout
Part Numbers
Dimensions
No. of
Pos.
Pkg in
Tube
Pkg in
Tape & Reel*
A
B
C
D
E
10
12
20
24
30
40
50
60
80
100
.380 [9.65]
.430 [10.92]
.630 [16.00]
.730 [18.54]
.880 [22.35]
1.130 [28.70]
1.380 [35.05]
1.630 [41.40]
2.130 [54.10]
2.630 [66.80]
.200 [5.08]
.250 [6.35]
—
.025 [0.64]
—
—
—
—
—
—
—
5-104549-1
6-104549-1
5-104549-2
5-104549-3
5-104549-5
5-104549-6
5-104549-7
5-104549-8
5-104549-9
6-104549-0
5-147377-1
—
—
.450 [11.43]
.550 [13.97]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.950 [49.53]
.150 [3.81]
.200 [5.08]
.275 [6.99]
.400 [10.16]
.525 [13.34]
.650 [16.51]
.900 [22.86]
.150 [3.81]
.200 [5.08]
.275 [6.99]
.400 [10.16]
5-147377-2
5-147377-9
5-147377-3
5-147377-4
5-147377-5
5-147377-6
5-147377-7
5-147377-8
.525 [13.34] .025 [0.64]
.650 [16.51]
.900 [22.86]
.000
.000
.000
2.450 [62.23] 1.150 [29.21] 1.150 [29.21]
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover
Note: All part numbers are RoHS compliant.
44
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Surface-Mount Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Double Row, Vertical
.025
[0.64]
Ref.
.198 .002 [5.03 .05]
.100
[2.54]
.125 .008
[3.18 0.20]
2 Plc.
A
Material and Finish
Housing — Glass-filled thermpolastic,
black, 94V-0 rated
.370 .003
[9.40 0.08]
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact
underplated .000050 [0.00127] nickel
3
.053 .006
[1.35 0.15]
Holddown — Copper alloy; duplex
plated .000150 [0.00381] tin over
.000050 [0.00127] nickel
.050
[1.27]
.065 .001
[1.65 0.03]
Dia. Typ. (Pad)
Related Product Data
Performance Characteristics —
Holes for holddowns are not
required for parts packaged
in tape and reel.
page 63
Mateable Connectors — pages 29,
30, 34, 35 & 44
.285
[7.24]
Ref.
Board-to-Board Spacing — page 63
.042 .003 Dia.Typ.
[1.07 0.08] (Plated-Thru hole)
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25035
Recommended PC Board Layout
Dimensions
Part Numbers
No. of
Pos.
A
B
C
Pkg in Tube Pkg in Tape & Reel*
10
20
24
30
40
50
60
80
100
.294 [7.47]
.200 [5.08]
.400 [10.16]
.650 [16.51]
.750 [19.05]
.900 [22.86]
1.150 [29.21]
1.400 [35.56]
1.650 [41.91]
2.150 [54.61]
2.650 [67.31]
5-104550-1
5-104550-2
5-104550-3
5-104550-4
5-104550-5
5-104550-6
5-104550-7
5-104550-8
5-104550-9
5-147378-1
5-147378-2
5-147378-9
5-147378-3
5-147378-4
5-147378-5
5-147378-6
5-147378-7
5-147378-8
.544 [13.82]
.644 [16.36]
.794 [20.17]
1.044 [26.52]
1.294 [32.87]
1.544 [39.22]
2.044 [51.92]
2.544 [64.62]
.450 [11.43]
.550 [13.97]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.950 [49.53]
2.450 [62.23]
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover
Note: All part numbers are RoHS compliant.
45
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline
FFC Cable
Product Facts
I Signal application only,
1.5 amperes maximum
single circuit
I Single or double row
connectors
I Terminates flexible flat
conductor cable and flexible
etched circuitry
I Shielded cable provides for
customizing
I Center latch housing
providing positive latching
3
The cable-to-board .050
[1.27] center FFC
receptacle connectors are
part of the AMPMODU
System 50 family for
terminating flexible flat
conductor cable and
flexible etched circuitry.
Flexible flat conductor cable
is a planar parallel
conductor cable. It can be
used as a one-to-one
solder tab. Receptacle
contacts are made of
phosphor bronze with a
finish of plated gold duplex,
while the solder tab
contacts are finished in a
bright tin-lead overall.
connector or as a complex
harness, allowing split-outs
and special routing. The
cable is comprised of .026
[0.66] wide x .003 [0.08]
thick conductors made of
copper per QQ-C-502 and
insulated with a flame
The complete product line
provides solder tabs for
board mounting at low cost
and custom shielding of the
cable.
The FFC receptacle uses a
dual beam contact with 30
microinches of gold plating.
The FFC receptacle
connectors have an integral
latch for positive locking to
shrouded mating headers.
retardant polyester film.
The FFC contacts are
available in receptacle and
46
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline
FFC Cable] (Continued)
Custom Designed
Cable Assemblies
Single Row
Receptacle
Housing
Solder Tabs
TE can supply customized
flexible flat conductor cable
assemblies using the com-
ponents shown on pages
48 thru 54. Typical exam-
ples of these cable assem-
blies are shown to the right.
Double Row
Receptacle
Housing
And, to meet the internal
shielding requirements of
today’s complex electronic
equipment, custom
designed shielded FFC
cable assemblies can be
made to your specific
specifications.
3
FFC Cable,
.050 [1.27]
Centerline
Solder Tabs
Single Row
Receptacle
Housing
FFC Cable,
.050 [1.27]
Centerline
47
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
FFC Contacts, .050 x .100 [1.27 x 2.54] Centerline
Receptacle
Solder Tab
D
.725
[18.42]
C*
C*
Receptacle Strip
B
.0085
[0.22]
.016
[0.41]
Accepts .015 [0.38] Sq. Post
.125-.350 [3.18-8.89] Long
D
3
Solder Tab Strip
Material and Finish
.100
[2.54]
Typ.
Phosphor bronze; plated gold
duplex or bright tin-lead overall
(See chart.)
Localized Plate Area 4
Related Product Data
Performance Characteristics —
page 63
.211
Max.
[5.36]
Housings — pages 49-52
Application Tooling — page 60-62
.0085 .0005
[0.216 0.013]
Typ.
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
Contacts
Application Tooling
Part Numbers
Dimensions
Part No./
Finish
Type
Config.
Machine With
Programmer
Machine
B
C*
D
.520
.725
Receptacle
Strip
Strip
Strip
Strip
Strip
Strip
1-487547-11
487923-42
487923-53
487940-42
487941-44
1-487547-25
—
[13.21]
[18.42]
.245
[6.22]
.480
[12.19]
.685
[17.40]
.245
[6.22]
.480
[12.19]
.685
[17.40]
224910-4
(120 V)
318619-4
(120 V)
Solder Tab
.110
[2.79]
.345
[8.76]
.550
[13.97]
224910-6
(240 V)
318619-6
(240 V)
.385
[9.78]
Contact Splice
Receptacle
—
—
—
.520
[13.21]
.725
[18.42]
1Duplex plated .000030 [0.00076] gold on mating area, .000100 [0.00254] min. bright tin in crimp area, with entire con-
tact underplated .000050 [0.00127] min. nickel.
2Plated .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel.
3Duplex plated .000015 [0.00038] gold on solder tab end, .000100 [0.00254] min. bright tin in crimp area, with entire
contact underplated .000050 [0.00127] min. nickel.
4Plated .000150 [3.81µm] min. bright tin over .000050 [1.27µm] min. nickel.
5Duplex Plated .000150 [0.00038] gold on mating area, .000100 [0.00254] min bright tin in crimp area, with entire con-
tact underplated .000050 [0.00127] min. nickel.
*After cut-off from carrier strip.
Note: All part numbers are RoHS compliant.
48
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board
Plain Style Housings
.585
[14.86]
Plain Style Housings
B
.047
[1.19]
(2 Pls.)
Latch Style Housings
Typ
Typ.
3
.098
[2.49]
.050
[1.27]
Material and Finish
Housing — Black thermoplastic, flame
retardant, 94V-0 rated
A
Related Product Data
Performance Characteristics —
page 63
Latch Style Housings
Receptacle Contacts — page 48
Mateable Headers — pages 27, 28,
32 & 33
Technical Documents — page 64
Product Specification 108-16022
.585
[14.86]
Application Specification
114-16008
B
.294
[7.47]
.047
[1.19]
(2 Pls.)
.275
[6.98]
Typ
.050
.098
[2.49]
Typ.
[1.27]
A
49
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
Dimensions
Part Numbers
Latch Style Receptacle Housing
No. of
Pos.
A
B
Plain Receptacle Housing
487544-1
487544-2
487544-3
487544-4
487544-5
487544-7
487544-9
—
4
5
6
7
8
.150 [3.18]
.200 [5.08]
.250 [6.35]
.300 [7.62]
.350 [8.89]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
.750 [19.05]
.800 [20.32]
.244 [6.20]
.294 [7.47]
.344 [8.74]
.394 [10.01]
.444 [11.28]
.544 [13.82]
.644 [16.36]
.694 [17.63]
.794 [20.17]
.844 [21.44]
.894 [22.71]
487545-1
487545-2
487545-3
487545-4
487545-5
487545-7
487545-9
1-487545-0
1-487545-2
—
1-487545-4
1-487545-7
1-487545-9
2-487545-2
2-487545-3
2-487545-5
2-487545-7
3-487545-3
3-487545-7
4-487545-2
4-487545-7
10
12
13
15
16
17
20
22
25
26
28
30
36
40
45
50
1-487544-2
1-487544-3
1-487544-4
1-487544-7
1-487544-9
2-487544-2
—
.950 [24.13] 1.044 [26.52]
1.050 [26.67] 1.144 [29.06]
1.200 [30.48] 1.294 [32.87]
1.250 [31.75] 1.343 [34.11]
1.350 [34.29] 1.443 [36.65]
1.450 [36.83] 1.544 [39.22]
1.750 [44.45] 1.844 [46.84]
1.950 [49.53] 2.044 [51.92]
2.200 [55.88] 2.294 [58.27]
2.450 [62.23] 2.544 [64.62]
—
—
3-487544-3
—
3
—
4-487544-7
Note: Other sizes of receptacle housings (plain and latch style) can be made available, consult TE.
Plain Housing,
Stacked End-to-End
Latch Style Housing
(See Notes
1 & 2 below.)
Plain Housings,
Stacked Side-to-Side
(See Note 1 below.)
Post Removed
AMPMODU System 50 Header, Shrouded
(Right-Angle Post shown
for ref. only.)
AMPMODU System 50 Header, Unshrouded
(Straight Post shown for ref. only.)
Notes: 1. Plain housings are side-to-side stackable on either straight or
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the posts located between the adjoining
housings must be removed to provide housing end clearance.
Typical Cable-to-Board Application
of Plain Receptacle Housing
Typical Cable-to-Board Application
of Latch Style Receptacle Housing
Note: All part numbers are RoHS compliant.
50
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board
Plain Style Housings
.585
[14.86]
Plain Style Housings
B
Plain
.047
[1.19]
(2 Plc.)
.198
[5.03]
3
.100
[2.54]
Typ
.050
Typ.
Latch Style Housings
[1.27]
A
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 63
Receptacle Contacts — page 48
Mateable Headers — pages 29, 30,
34, 35, & 44
Latch Style Housings
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
B
.585
[14.86]
.047
[1.19]
(2 Plc.)
.375
[9.53]
.198
[5.03]
.100
[2.54]
Typ
Latch
.050
Typ.
[1.27]
A
51
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
Dimensions
No. of
Pos.
Plain Housing
Part Numbers
Latch Style Housing
Part Numbers
A
B
8
10
12
14
16
20
24
26
30
34
40
44
50
60
72
80
100
.150 [3.81]
.200 [5.08]
.250 [6.35]
.300 [7.62]
.350 [.889]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.950 [24.13]
1.050 [26.67]
1.200 [30.48]
1.450 [36.83]
1.750 [44.45]
1.950 [49.53]
2.450 [62.23]
.247 [6.27]
.297 [7.54]
.374 [8.81]
487938-8
1-487938-0
1-487938-2
1-487938-4
1-487938-6
2-487938-0
2-487938-4
2-487938-6
3-487938-0
3-487938-4
4-487938-0
4-487938-4
5-487938-0
—
487937-8
1-487937-0
1-487937-2
1-487937-4
1-487937-6
2-487937-0
2-487937-4
2-487937-6
3-487937-0
3-487937-4
4-487937-0
4-487937-4
5-487937-0
6-487937-0
7-487937-2
8-487937-0
487937-1
.397 [10.08]
.447 [11.35]
.547 [13.89]
.647 [16.43]
.697 [17.7]
.797 [20.24]
.897 [22.78]
1.047 [26.59]
1.147 [29.13]
1.297 [39.94]
1.547 [39.29]
1.847 [46.91]
2.047 [51.99]
2.547 [64.69]
7-487938-2
8-487938-0
487938-1
Note: Other sizes of receptacle housings, up to 120 positions, can be made available, consult TE.
3
Plain Housing,
Stacked End-to-End
(See Notes 1 & 2 below.)
Latch Style Housing (Shown)
Post Removed
AMPMODU System 50 Header, Unshrouded
(Straight Post shown for ref. only.)
AMPMODU System 50 Header,
Shrouded (Right-Angle Post
shown for ref. only.)
Notes: 1. Plain housings are end-to-end stackable on either straight or
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the two posts located between the adjoining
housings must be removed to provide housing end clearance.
Typical Cable-to-Board Application
of Plain Receptacle Housing
Typical Cable-to-Board Application
of Latch Style Receptacle Housing
Note: All part numbers are RoHS compliant.
52
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline, Cable-to-Board
.040
[1.02]
Vertical Cable Entry
Pos. 1
Identification
.020
[0.508]
.240
[6.10]
.240
[6.10]
.050
[1.27]
.155
[3.94]
A
.100
[2.54]
Dia. Typ
Dia. Typ.
.031 .003
[0.79 0.08]
Material and Finish
**
.310
[7.87]
Housing and Cover — Black
thermoplastic, flame retardant,
94V-0 rated
Contacts — Phosphor bronze, plated
.000150 [0.00381] min. bright tin over
.000050 [0.00127] min. nickel on entire
contact
Dia. Typ
Dia. Typ.
.100 .002
[2.54 0.05]
.050 .002*
[1.27 0.05]
Typ
.100
Pos. 1
Typ.
[2.54]
3
Typ
Typ.
.010
[0.25]
.050
Recommended Mounting Hole Pattern
[1.27]
.105
[2.67]
** .002 [ 0.05] tolerance not to accumulate
within one mounting hole pattern.
Performance Characteristic
B
**This mounting hole required for even-numbered
connector sizes only.
Contact Current Rating—
1 ampere†
Note: ZIF-Line connector illustrated above with
cover in closed position.
†1 ampere rating is for single circuit.
Multiple circuits, ambient temperature
and conductor size affect current
carrying capacity.
Related Product Data
FFC Cable (with Tin-Plated
Prepared Ends) —
Consult TE.
Typ
.210
Min.
[5.33]
Technical Documents — page 64
Product Specification 108-16025
FFC Cable or
Flexible Etched Circuitry
with Prepared Ends*
Application Specification
114-16014
.004-.012
[0.102-0.305]
Thk.
ZIF-Line Connector
(Termination
Completed with
Cable Inserted and
Cover Closed)
ZIF-Line Connector
(Cover Open)
*FFC cable with tin-plated prepared ends can be made available, consult TE.
Note: Special preparation of cable is required, refer to TE Application Specification No. 114-16014.
Typical Flexible Flat Conductor Cable-to-Board Application
53
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
Connector
Part
Numbers
Connector
Part
Numbers
Dimensions
Dimensions
No. of
Pos.
No. of
Pos.
A
B
A
B
5
.470 [11.94]
.520 [13.21]
.570 [14.48]
.620 [15.75]
.670 [17.02]
.720 [18.29]
.770 [19.56]
.820 [20.83]
.870 [22.10]
.920 [23.37]
.970 [24.64]
1.020 [25.91]
.410 [10.41] 5-487576-0
.460 [11.68] 5-487576-1
.510 [12.95] 4-487576-8
.560 [14.22] 4-487576-9
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
1.770 [44.96] 1.710 [43.43] 2-487576-3
1.820 [46.23] 1.760 [44.70] 2-487576-4
1.870 [47.50] 1.810 [45.97] 2-487576-5
1.920 [48.77] 1.860 [47.24] 2-487576-6
1.970 [50.04] 1.910 [48.51] 2-487576-7
2.020 [51.31] 1.960 [49.78] 2-487576-8
2.070 [52.58] 2.010 [51.05] 2-487576-9
2.120 [53.85] 2.060 [52.32] 3-487576-0
2.170 [55.12] 2.110 [53.59] 3-487576-1
2.220 [56.39] 2.160 [54.86] 3-487576-2
2.270 [57.66] 2.210 [56.13] 3-487576-3
2.320 [58.93] 2.260 [57.40] 3-487576-4
2.370 [60.20] 2.310 [58.67] 3-487576-5
2.420 [61.47] 2.360 [59.94] 3-487576-6
2.470 [62.74] 2.410 [61.21] 3-487576-7
2.520 [64.01] 2.460 [62.48] 3-487576-8
2.570 [65.28] 2.510 [63.75] 3-487576-9
2.620 [66.55] 2.560 [65.02] 4-487576-0
2.670 [67.82] 2.610 [66.29] 4-487576-1
2.720 [69.09] 2.660 [67.56] 4-487576-2
2.770 [70.36] 2.710 [68.83] 4-487576-3
2.820 [71.63] 2.760 [70.10] 4-487576-4
2.870 [72.90] 2.810 [71.37] 4-487576-5
2.920 [74.17] 2.860 [72.64] 4-487576-6
2.970 [75.44] 2.910 [73.91] 4-487576-7
6
7
8
9
.610 [15.49]
.660 [16.76]
.710 [18.03]
.760 [19.30]
.810 [20.57]
.860 [21.84]
.910 [23.11]
.960 [24.38]
487576-1
487576-2
487576-3
487576-4
487576-5
487576-6
487576-7
487576-8
487576-9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1.070 [27.18] 1.010 [25.65]
1.120 [28.45] 1.060 [26.92] 1-487576-0
1.170 [29.72] 1.110 [28.19] 1-487576-1
1.220 [30.99] 1.160 [29.46] 1-487576-2
1.270 [32.26] 1.210 [30.73] 1-487576-3
1.320 [33.53] 1.260 [32.00] 1-487576-4
1.370 [34.80] 1.310 [33.27] 1-487576-5
1.420 [36.07] 1.360 [34.54] 1-487576-6
1.470 [37.34] 1.410 [35.81] 1-487576-7
1.520 [38.61] 1.460 [37.08] 1-487576-8
1.570 [39.88] 1.510 [38.35] 1-487576-9
1.620 [41.15] 1.560 [39.62] 2-487576-0
1.670 [42.42] 1.610 [40.89] 2-487576-1
1.720 [43.69] 1.660 [42.16] 2-487576-2
3
Note: All part numbers are RoHS compliant.
54
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Ribbon Cable, System 50
Product Facts
I Preassembled housing
and cover
I One step termination
I End and daisy chain
termination
I Positive end latching of
connector to shrouded
headers
I Terminates 30 AWG
[0.05 mm2] solid or
stranded and
32 AWG [0.03 mm2]*
stranded .025 [0.64]
centerline ribbon cable
with PVC insulation
I 0.5 ampere current
rating (limited by cable)
3
The AMP-LATCH System 50
Ribbon Cable connector
is a receptacle connector
that will terminate ribbon
cable on .025 [0.64]
stranded conductors, with
PVC cable insulation.
contacts are plated with
30 gold duplex plating. The
latching feature is located
on the receptacle, not the
header, and saves board
space and eliminates future
problems of “latch height
compatibility.”
The housing and cover
(black) have a 94V-0 rating.
A copper alloy single
centerlines. It is available
in select sizes from 10 to
100 positions and will
mating beam contact
provides the interconnect
between the conductor
and the .015 [0.38] square
accommodate 30 AWG
[0.05 mm2] solid or stranded posts on the .050 x .100
and 32 AWG [0.03 mm2]
[1.27 x 2.54] grid. The
55
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Double Row Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board, Ribbon Cable, System 50
.254 .228
[6.45] [5.79]
A
Cover
Latch
.054
[1.37]
B
C
.580
[14.73]
Before
Termination
Material and Finish
.430
[10.92]
Housing — Black thermoplastic,
94V-0 rated
.335
[8.51]
Contact
Housing
Latches — Stainless steel
Contacts — Copper alloy, plated gold
over nickel with tin in termination area
.100
[2.54]
.198
[5.03]
3
.228
[5.80]
.102
[2.59]
E
Position #1
Indicator
.246
[6.25]
Related Product Data
F
Performance Characteristics —
page 63
Mateable Headers — pages 29, 30,
34, 35 & 44
Application Tooling — page 60-62
Mates with Posts —
.015 [0.38] square, .125 [3.18] long,
on.050 x .100 [1.27 x 2.54] grid
.100
[2.54]
.050
[1.27]
Typ.
Technical Documents — page 64
Product Specification 108-1109
D
Application Specification
114-25029
Dimensions
Part
Numbers
No. of
Pos.
A
B
C
D
E
F
10
14
16
20
24
26
30
34
40
44
50
60
64
68
72
80
.510 [12.95]
.610 [15.49]
.660 [16.76]
.760 [19.30]
.860 [20.32]
.910 [23.11]
1.010 [25.65]
.445 [11.30]
.545 [13.84]
.595 [15.11]
.695 [17.65]
.795 [20.19]
.845 [21.46]
.945 [24.00]
.225 [5.72]
.325 [8.26]
.375 [9.52]
.475 [12.07]
.575 [14.61]
.625 [15.88]
.725 [18.42]
.825 [20.96]
.975 [34.54]
.200 [5.08]
.300 [7.62]
.096 [2.44]
.146 [3.71]
.171 [4.34]
.221 [5.61]
.271 [6.88]
.296 [7.52]
.346 [8.79]
.396 [10.06]
.471 [11.96]
.521 [13.23]
.596 [15.14]
.721 [18.31]
.771 [19.58]
.821 [20.85]
.871 [22.12]
.971 [24.66]
.294 [7.47]
2-111196-5
2-111196-6
2-111196-7
1-111196-8
2-111196-8
2-111196-9
1-111196-9
3-111196-0
2-111196-0
3-111196-1
2-111196-1
2-111196-2
3-111196-2
3-111196-4
2-111196-3
3-111196-3
2-111196-4
.394 [10.01]
.444 [11.28]
.544 [13.82]
.644 [16.36]
.694 [17.63]
.794 [20.17]
.894 [22.71]
.350 [8.89]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.950 [24.13]
1.050 [26.67]
1.200 [30.48]
1.450 [36.83]
1.550 [39.37]
1.650 [41.91]
1.750 [44.45]
1.950 [49.53]
1.110 [28.19] 1.045 [26.54]
1.260 [32.00] 1.195 [30.35]
1.044 [26.52]
1.144 [29.06]
1.294 [32.87]
1.544 [39.22]
1.644 [41.76]
1.744 [44.30]
1.844 [46.84]
2.044 [51.92]
2.544 [64.62]
1.360 [34.54] 1.295 [32.89] 1.075 [27.31]
1.510 [38.35] 1.445 [36.70] 1.225 [31.12]
1.760 [44.70] 1.695 [43.05] 1.475 [37.47]
1.860 [47.24] 1.795 [45.59] 1.575 [40.00]
1.960 [49.78] 1.895 [48.13] 1.675 [42.55]
2.060 [52.32] 1.995 [50.67] 1.775 [45.08]
2.260 [57.40] 2.195 [55.75] 1.975 [50.17]
100 2.760 [70.10] 2.695 [68.45] 2.475 [62.87]
2.450 [62.23] 1.221 [31.01]
Note: All part numbers are RoHS compliant.
56
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Paddleboard Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board, Ribbon Cable, System 50
.340
[8.64]
(Unterminated)
.050
[1.27]
.168
[4.27]
.100
[2.54]
.020
[0.51]
.008
[0.20]
Typ.
.050
[1.27]
.024
[0.61]
.075
[1.91]
Typ.
Typ.
Typ.
B
.304
.045
[1.19]
Ref.
[7.72]
Material and Finish
Housing — Black LCP thermoplastic,
A
.040
[1.02]
.030
[0.76]
(Various Locations)
94V-0 rated
Standoffs
.118
[3.00]
Cover — Black polyester, 94V-0 rated
Contacts — Copper alloy, plated
.000100-.000200 [0.00245-0.00508]
bright tin over .000050-.000100
[0.00127-0.00254] nickel
.273
[6.93]
(Terminated)
3
Related Product Data
Position 1
Indicator
Performance Characteristics —
page 63
Application Tooling — pages 60-62
B
B
.050
[1.27]
.031
[0.79]
.050
[1.27]
.031
[0.79]
Technical Documents — page 64
Product Specification 108-1109
Typ.
Typ.
Typ.
Typ.
Application Specification
114-25040
.304
[7.72]
.304
[7.72]
.075
[1.91]
.075
[1.91]
Typ.
Typ.
Recommended PC Board Layout 1
Recommended PC Board Layout 2
Dimensions
Dimensions
Part Numbers
A B
No. of
Pos.
PCB Hole
Layout
No. of
Part Numbers
PCB Hole
Layout
Pos.
A
B
10
14
16
20
24
26
28
30
34
40
1
1
2
2
2
1
2
1
1
2
.436 [11.07]
.536 [13.61]
.586 [14.88]
.686 [17.42]
.786 [19.96]
.836 [21.23]
.886 [22.50]
.936 [23.77]
1.036 [26.31]
1.186 [30.12]
.200 [5.08]
.300 [7.62]
.350 [8.89]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.650 [16.51]
.700 [17.78]
.800 [20.32]
.950 [24.13]
5111595-1
5111595-2
5111595-3
5111595-4
5111595-5
5111595-6
2-5111595-0
5111595-7
5111595-8
5111595-9
44
46
50
60
64
68
72
80
100
2
1
1
2
2
2
2
2
2
1.286 [32.66]
1.336 [33.93]
1.436 [36.47]
1.686 [42.82]
1.786 [45.36]
1.886 [47.90]
1.986 [50.44]
2.186 [55.52]
2.686 [68.22]
1.050 [26.67]
1.100 [27.94]
1.200 [30.48]
1.450 [36.83]
1.550 [39.37]
1.650 [41.91]
1.750 [44.45]
1.950 [49.53]
2.450 [62.23]
1-5111595-0
1-5111595-7
1-5111595-1
1-5111595-2
1-5111595-3
1-5111595-9
1-5111595-4
1-5111595-5
1-5111595-6
Note: All part numbers are RoHS compliant.
57
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Flat Ribbon Cable, PVC Insulation
30 AWG [0.05 mm2],
Solid Bare Copper
B
A
30 AWG [0.05 mm2]
Solid Bare Copper
Product Specifications
.025
[0.635]
Voltage —150 Volts
Red Edge Mark
for orientation
Impedance — 80 Ohms Nominal
(GND,SIG, GND, applies to 30AWG
Solid Bare Copper)
Capacitance — 19.2 pf/ft at
1 MHz nom.
Insulation—Gray Flame
Retardant Flexible PVC
Flammability—UL: VW1
.0125
.006 [0.152] Minimum
Insulation Thickness
Temperature Rating — -
20°C to +105°C
[0.318]
.025
[0.635]
Typ.
Propagation Delay — 1.51 ns/ft nom.
Crosstalk —
10 ft sample 5 ns rise time:
Near End — 4.0% max.
Far End — 6.0% max.
UL Listing — STYLE 2678
Part Numbers
Length Per Reel*
100 ft. [30.48 m] 500 ft. [152.4 m]
Dimensions
No. of
Conductors
A
B
16
20
24
26
28
30
34
36
40
44
50
60
68
72
80
100
.375 [9.52]
.475 [12.07]
.575 [14.61]
.625 [15.88]
.675 [17.14]
.725 [18.42]
.825 [20.95]
.875 [22.23]
.975 [24.77]
1.075 [27.31]
1.225 [27.94]
1.475 [37.47]
1.675 [42.55]
1.775 [45.09]
1.975 [50.17]
2.475 [62.87]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.650 [16.51]
.700 [17.78]
.750 [19.05]
.850 [21.59]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.250 [31.75]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
2.000 [50.80]
2.500 [63.50]
5-57013-1
1-57013-3
1-57013-4
2-57013-5
4-57013-6
1-57013-5
4-57013-9
1-57013-6
1-57013-7
1-57013-8
1-57013-9
2-57013-0
2-57013-1
2-57013-2
2-57013-3
2-57013-4
5-57013-2
57013-1
57013-8
2-57013-6
4-57013-7
57013-6
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E53793
3
5-57013-0
57013-7
R
57013-2
57013-9
1-57013-0
57013-3
Certified by Canadian
R
Standards Association,
1-57013-1
1-57013-2
57013-4
(CSA File No. LL83498)
57013-5
*Reel may contain separate lengths, 20 ft. [6.1 m] min. per length.
Electrical Characteristics of .025 [0.64] Centerline IDC Ribbon Cable
Impedance
Single Ended
G-S-G
Capacitance
Nominal
G-S-G
Nominal
Prop.
Delay
NEXT
10 Ft
FEXT
10 Ft
Base
Inductance
Nominal
Insulation
Part No.
AWG
Voltage
5ns Rise Time 5ns Rise Time
57013
PVC
TPE
FEP
30 Solid
30 Solid
30 Solid
150 Vac
150 Vac
300 Vac
80 Ohms Nom
90+/- 6 Ohms
93 Ohms Nom
19.2 pf/ft
15.3 pf/ft
13.6 pf/ft
.160 mh/ft
.124 mh/ft
.120 mn/ft
1.51 ns/ft
1.382 ns/ft
1.34 ns/ft
4.0% Max
2.39% Nom
2.6% Nom
6.0% Max
2.99% Nom
2.8% Nom
219054, 219137
57119, 57139, 57145
57131
219055
PVC
TPE
FEP
30 Stranded
30 Stranded
30 Stranded
150 VAC
150 VAC
300 Vac
66 Ohms Nom
78 Ohms Nom
85 Ohms Nom
23.0 pf/ft
19.4 pf/ft
15.4 pf/ft
.100 mh/ft
.118 mh/ft
.110 mh/ft
1.55 ns/ft
1.510 ns/fr
1.36 ns/ft
2.8% Max
1.37% Nom
2.5% Nom
4.5% Max
2.37% Nom
2.8% Nom
57288, 57289, 57290
219253
TPE
31 Stranded
150 Vac
90+/- 6 Ohms
80 Ohms Nom
15.4 pf/ft
.125 mh/ft
1.527 ns/ft
1.97% Nom
2.51% Nom
57038
219138
PVC
TPE
FEP
32 Stranded
32 Stranded
32 Stranded
150 Vac
19.2 pf/ft
12.8 pf/ft
13.0 pf/ft
.147 mh/ft
.138 mh/ft
.120 mh/ft
1.51 ns/ft
1.664 ns/ft
1.36 ns/ft
4.0% Max
2.10% Nom
2.6% Nom
6.0% Max
2.57% Nom
2.8% Nom
150 Vac 104 Ohms Nom
300 Vac 105 Ohms Nom
57118, 57138, 57144
Note: All part numbers are RoHS compliant.
58
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Centerline IDC Ribbon Cable, PVC Insulation
30 AWG 7/38 Stranded
Tinned Copper
B
For use with:
Edge
Mark
A
30 AWG 7/38
Stranded
Tinned Copper
AMP-LATCH System 50,
AMPLIMITE .050 Series and
AMPMODU System 50
Connectors
.027 [0.686]
Compatible with:
AMP R-CAM Ribbon Cable
Assembly Machine
.0125 [0.318]
.006 [0.152] Minimum
Insulation Thickness
Product Specifications
PVC Insulation
Voltage Rating — 150 Volts
Impedance — 66 ohms (GND, SIG,
GND)
.025 TYP
[0.635]
Capacitance — 23 pf/ft. at
1 KHz
Part Numbers
Length Per Reel
Dimensions
Propagation Delay —
1.55 ns/ft. [5.6 ns/m]
Crosstalk —
10 Ft. sample 5 ns rise time
Near End — 2.8% max
Near End — 4.5% max
No. of
Conductors
A
B
100 ft. [30.5 m]
500 ft. [152.4 m]
20
40
.475 [12.07]
.975 [24.77]
1.225 [31.12]
1.675 [42.55]
1.975 [50.17]
2.475 [62.87]
.500 [12.70]
1.000 [25.40]
1.250 [31.75]
1.700 [43.18]
2.000 [50.80]
2.500 [63.50]
1-57131-3
1-57131-7
1-57131-9
2-57131-1
2-57131-3
2-57131-4
57131-1
57131-2
3
50
1-57131-0
1-57131-1
57131-4
68
UL AWM Style 2678
80
R
Certified
100
57131-5
R
Note: All part numbers are RoHS compliant.
59
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Application Tooling for Flexible Film Contacts
Hand Crimping
Tool Assemblies
(for repair purposes)
Flexible Film Termination Machine
(Terminates Continuous Strip Contacts Sequentially)
C
Part No. 90273-5—for .100
L
Multi-Crimp Contacts (408-9564)
3
C
Extraction Tools for .100
Contacts
L
Tool No. 91200-I*— for Receptacle
Housings with Side Locking Lance
Slot (408-7916)
Tool No. 91047-I*— for Receptacle
and Pin Housings with End Locking
Lance Slot (408-7384)
The flexible film
Machine Part Numbers
Machine
*Consult TE for specific dash nos.
Description
semiautomatic bench
Machine
With Programmer*
318619-1
machine for terminating
.050 [1.27] and .100 [2.54]
centerline flexible flat
C
.100 [2.54]
.100 [2.54]
Multi-Crimp, 120 V
Multi-Crimp, 240 V
224910-1
224910-2
224910-3
224910-4
224910-6
L,
C
318619-2
318619-3
318619-4
318619-6
L,
C
.100 [2.54] , ARINC, 120 V
L
conductor cable (FFC),
flexible etched circuitry
(FEC), and flexible printed
wiring (FPW) with AMP FFC
reel-mounted contacts. For
each cable or circuitry, the
contacts are automatically
applied one-at-a-time in a
straight sequence. To skip
positions, an optional
programmer control box is
available. Crimp height is
easily adjustable in .0002
[.0051] increments.
For tooling information, contact the
Technical Support Center:
1-800-522-6752.
C
.050 [1.27]
.050 [1.27]
Multi-Crimp, 120 V
Multi-Crimp, 240 V
L,
C
L,
*The Programmer Kit (Part No. 356484-1) may be purchased with a new
machine, or separately for adding onto an existing machine.
Technical Documents
Specifications
Width — 20.5 [520]
Depth — 27.5 [700]
Height — 18 [460] (with reel support)
Reel Size — 24 [610] (max.)
Weight — 100 lb. [45.4 kg]
Electrical Source —
120 VAC, 50/60 Hz, 7.0 A;
240 VAC, 50/60 Hz, 3.5 A
Customer Manuals
409-5835 (Part Numbers 224910 and
318619)
409-5880 Programmer Kit (Part
Number 356484-1)
Termination rates up to
200 contacts per minute.
Note: All part numbers are RoHS compliant.
60
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling for Compliant Pin Connectors
ASG Servo Electric Presses
for Compliant Pin
Connectors
TE offers the ASG line of
servo electric presses for
the application of compliant
pin products. Systems are
available in a wide range of
pressing forces, board size
capabilities and automation
levels to meet almost any
applications requirements.
Each system utilizes a servo
electric motor with PC con-
trol. Coupled with force and
distance monitoring and
control, the entire line pro-
vides 100% quality assur-
ance in real-time with SPC
data collection capabilities.
Automatic set up and a
3
graphical operator interface
help provide intuitive opera-
tion to help reduce common
and costly operator errors.
Press Force Monitoring for Scrap Avoidance
Every TE ASG servo press
utilizes real-time force and
distance monitoring and
control. This allows the
press to identify an error
and react throughout the
press stroke. Common
problems such as PCB
holes above\below specifi-
cation and sometimes bent
pins can be detected by
monitoring both minimum
and maximum force param-
eters. Common operator
error such as improperly
placed connectors, miss-
ing\incorrect connector or
tooling can also be found
by monitoring premature or
missing force parameters.
In each case, the system
can stop during the press
cycle to avoid costly scrap
and rework.
Product Line Overview
BMEP
MEP
AEP 6T
AEP 12T
Benchtop
Semi-Automatic Press
Stand-Alone
Semi-Automatic Press
Stand-Alone
Automatic Press
Stand-Alone or
Inline Automatic Press
System Type
Up to 5 Tons
[44 kN]
Up to 12 Tons
[107 kN]
Up to 6 Tons
[53 kN]
Up to 12 Tons
[107 kN]
Force Capability
Up to 18" x 24"
[460x610 mm]
Up to 30" x 36"
[760x915 mm]
Up to 30" x 36"
[760x915 mm]
Up to 36" x 48"
[915x1220 mm]
Board Size Capability
Please contact the Tyco Tooling Assistance Center at 1-800-722-1111 for help with choosing the correct press and tooling to meet your application needs.
See Catalog 1309329 for more information on this equipment.
Note: All part numbers are RoHS compliant.
61
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Application Tooling for Ribbon Cable Connectors
These application tools are
designed for one-step
termination of ribbon cable
connectors to planar,
ground plane and
shielded/jacketed ribbon
cable on .025 [0.64]
centers. A complete set of
tooling consists of an Arbor
Tool (manual, Part No.
91085-2 or pneumatic,
Part No. 91112-3), a Base
Assembly, Part No.
768338-4 and a Connector
Specific Kit, Part No.
679167-1 (receptacle).
Pneumatic Auto-Cycle
Tool Part No. 91112-3
Manual Arbor Tool
Part No. 91085-2
Technical Documents
Instruction Sheets
408-7777 — Manual Arbor Frame
Assembly
408-6732 — Pneumatic Auto-Cycle
Assembly
3
408-9827 — Universal Base Assembly,
Arbor Tool
408-9872 — Connector Specific Kit
for Receptacle Connectors (.025 [0.64]
Centerline Cable)
408-9928 — Connector Specific Kit
for Paddleboard Connectors (.025 [0.64]
Centerline Cable)
Note: Tooling is available for other
manufacturers’ manual arbor tools.
For information contact the
TE Technical Support Center:
1-800-522-6752
Note: All part numbers are RoHS compliant.
62
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Performance Specifications
Board-to-Board Spacing
for Thru-Hole and
Surface-Mount Connector
Combinations
Thru-Hole Receptacle–
Thru-Hole Header
Thru-Hole Receptacle–
Surface-Mount Header
(Single and Double Row,
(Double Row, Shrouded)
Shrouded and Unshrouded)
Surface-Mount Receptacle–
Thru-Hole Header
Surface-Mount Receptacle–
Surface-Mount Header
(Double Row, Shrouded and
Unshrouded)
(Double Row, Shrouded)
3
Need more information?
Call the Technical Support Center: 1-800-522-6752.
The Technical Support Center is staffed with specialists
well versed in all TE products. The Center can provide
you with:
I
I
I
I
I
Technical Support
Catalogs
Technical Documents
Product Samples
TE Authorized Distributor Locations
Performance Specifications
Board-to-Board,
Board-to-Board,
Surface-Mount,
Headers and
Cable-to-Board,
.025 [0.64] Centerline
Ribbon Cable
Thru-Hole
Headers and
Receptacles
Cable-to-Board,
.050 [1.27] Centerline
FFC Cable Receptacles
Description
Receptacles
Receptacles
Size Range-Single Row
Double Row
4 thru 50
10 thru 100
—
4 thru 50
8 thru 100
—
10 thru 100
10 thru 100
Current Rating (per contact)
Dielectric Withstanding Voltage
Insulation Resistance
1.0 amperes
1.0 amperes
1.5 amperes
0.5 amperes
500 VAC
500 VAC
300 VAC
200 VAC
5,000 Megohms
200 Cycles
5,000 Megohms
200 Cycles
5,000 Megohms
200 Cycles
5,000 Megohms
150 Cycles
Durability (tested to)
Mating Force (per contact)
Unmating Force (per contact)
Operating Temperature
5 oz. [1.38 N] Max.
0.8 oz. [0.22 N] Min.
-65°C to +105°C
5 oz. [1.38 N] Max.
0.8 oz. [0.22 N] Min.
-65°C to +105°C
8 oz. [2.22 N] Max.
1.0 oz. [0.27 N] Min.
-55°C to +105°C
4 oz. [1.11 N] Max.
*0.5 oz. [0.13 N] Min.
-65°C to +105°C
*With latches depressed.
63
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Technical Documents
The following is a list of technical documents covering the application, performance and
maintenance of AMPMODU System 50 connectors.
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineer.
108-1093—AMPMODU System 50 Interconnection System, Board-to-Board
108-1109—AMPLATCH System 50 Receptacle and Paddleboard Connector
108-16022—Connector System, .050 [1.27] Centerline FFC Cable
108-16025—Connector, ZIF-Line 50
108-16029—Shielded Flexible Flat Conductor Cable
108-40002—Flexible Flat Conductor Cable
Application Specifications describe requirements for using the product in its intended appli-
cation and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-16008—Multiple Crimp Contact for .050 [1.27] Centerline FFC and FEC Cable
114-16014—AMP ZIF-Line 50 & 100 PCB Connectors
3
114-25029—AMPMODU System 50 Ribbon Cable Connectors
114-25031—AMPMODU System 50 Thru-Hole Connectors
114-25035—AMPMODU Surface-Mount Connectors
114-25040—AMPMODU System 50 Paddleboard Connectors
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-6732—Pneumatic Arbor Tool, Part Number 91112-3 (Auto-Cycle)
408-7384—Extraction Tool, Part Number 91047
408-7763—Pneumatic Arbor Tool, Part Number 91112-2
408-7777—Manual Arbor Tool, Part Number 91085-2
408-7916—Extraction Tool, Part Number 91200
408-9827—Universal Base Assembly, Arbor Tool, Part Number 768338-1
408-9872—Connector Specific Kit, Part Number 679167-1, AMPMODU System 50
Receptacle Connectors (.025 [0.64] Centerline Cable)
408-9928—Connector Specific Kit, Part Number 679176-1, AMPMODU System 50
Paddleboard Connectors (.025 [0.64] Centerline Cable)
408-9564—Hand Crimping Tool Assembly, Part Number 90273-5
408-9719—FFC Contact Positioning Hand Tool Kit, Part Number 91292-1
Note: All part numbers are RoHS compliant.
64
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
AMPMODU 2mm Connectors (Board to Board)
Product Facts
I 2.0 x 2.0 [.08 x .08]
centerline spacing
I Two-piece, double-row
connector system
I Unshrouded header styles
include; breakaway and
surface-mount
I All headers with 0.5 [.02]
square posted contacts
I Surface-mount connectors
compatible with standard
surface-mount processing
(VPR, IR)
I Closed top-entry
receptacle assemblies
include; vertical
mount and right-angle
I Receptacle contacts
employ dual cantilever
beams for two-point
electrical stability
I Duplex (gold/tin-lead)
plated posted contacts
and receptacle contacts
4
I Thermoplastic housing
AMPMODU 2mm connectors Thru-hole breakaway
material, UL 94V-0 rated
reliably and economically
meet the packaging and
inter-connection
requirements of today’s
miniature sophisticated
electronics. They are ideal
for mobile and portable
personal computers and disk
drive applications. In today’s
marketplace, 2mm is
headers feature brass
straight or right-angle
posts with a post length of
4.0 [.16] and a lead length
of 2.6 [.10].
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
The receptacle assemblies
employ phosphor bronze
contacts with dual canti-
lever beams and built-in
anti-overstress. This feature,
coupled with duplex
(gold/tin-lead) plating of
the header posts and
receptacle contacts,
I Certified by Canadian
Standards
Association,
R
File No. LR7189
expanding over many other
industry segments due to
space constraints.
I Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
This versatile double-
row connector system is
comprised of various
straight and right-angle
posted headers for
provide superior electrical
performance as well as
excellent solderability.
thru-hole and surface
mounting and several
closed top-entry
receptacle assemblies
for vertical and horizontal
mounting. Headers and
receptacle assemblies are
available in selected sizes
ranging from 4 through
80 positions.
65
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Unshrouded, Double Row, Thru-Hole, Vertical Mount
B
2.00 0.15
[.079 .006]
TYP
2.00
[.079]
0.5 [.02] Square
Straight Posts
TYP
4.00 0.15
[.157 .006]
Material and Finish
0.80
[.031]
DIA TYP
Housing — Black thermoplastic,
UL 94V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
0.50
0.02]
A
[
Recommended Solder Pad Layout
0.10
.004]
B
[
2.00 0.15
[.079 .006]
2.00 0.15
[.079 .006]
1.50 0.15
[.059 .006]
4.00 0.15
[.157 .006]
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-57197
0.50 0.02
[.02 .001]
DIA TYP
2.60 0.02
[.102 .001]
Packaging Method — Loose piece,
bag
Part Numbers
Reflow
Dimensions
Position
A
B
240°C
265°C
4
6
4.0 [.16]
6.0 [.24]
2.0 [.08]
4.0 [.16]
1470213-4
1470213-6
1734508-4
1734508-6
8
8.0 [.32]
6.0 [.24]
1470213-8
1734508-8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
10.0 [.39]
12.0 [.47]
14.0 [.55]
16.0 [.63]
18.0 [.71]
20.0 [.79]
22.0 [.87]
24.0 [.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
64.0 [2.52]
66.0 [2.60]
68.0 [2.68]
70.0 [2.76]
72.0 [2.83]
74.0 [2.91]
76.0 [2.99]
78.0 [3.07]
80.0 [3.15]
8.0 [.32]
1-1470213-0
1-1470213-2
1-1470213-4
1-1470213-6
1-1470213-8
2-1470213-0
2-1470213-2
2-1470213-4
2-1470213-6
2-1470213-8
3-1470213-0
3-1470213-2
3-1470213-4
3-1470213-6
3-1470213-8
4-1470213-0
4-1470213-2
4-1470213-4
4-1470213-6
4-1470213-8
5-1470213-0
5-1470213-2
5-1470213-4
5-1470213-6
5-1470213-8
6-1470213-0
6-1470213-2
6-1470213-4
6-1470213-6
6-1470213-8
7-1470213-0
7-1470213-2
7-1470213-4
7-1470213-6
7-1470213-8
8-1470213-0
1-1734508-0
1-1734508-2
1-1734508-4
1-1734508-6
1-1734508-8
2-1734508-0
2-1734508-2
2-1734508-4
2-1734508-6
2-1734508-8
3-1734508-0
3-1734508-2
3-1734508-4
3-1734508-6
3-1734508-8
4-1734508-0
4-1734508-2
4-1734508-4
4-1734508-6
4-1734508-8
5-1734508-0
5-1734508-2
5-1734508-4
5-1734508-6
5-1734508-8
6-1734508-0
6-1734508-2
6-1734508-4
6-1734508-6
6-1734508-8
7-1734508-0
7-1734508-2
7-1734508-4
7-1734508-6
7-1734508-8
8-1734508-0
4
10.0 [.39]
12.0 [.47]
14.0 [.55]
16.0 [.63]
18.0 [.71]
20.0 [.79]
22.0 [.87]
24.0 [.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
64.0 [2.52]
66.0 [2.60]
68.0 [2.68]
70.0 [2.76]
72.0 [2.83]
74.0 [2.91]
76.0 [2.99]
78.0 [3.07]
Note: All part numbers are RoHS
compliant.
66
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Unshrouded, Double Row, Thru-Hole, Right-Angle Mount
2.00 0.15
[.079 .006]
TYP
B
0.5 [.02] Square
Straight Posts
2.00
[.079]
TYP
4.00 0.15
[.157 .006]
Material and Finish
0.80
[.031]
2.60 0.02
[.102 .001]
Housing — Black thermoplastic,
DIA TYP
UL 94V-O Rated, 265°C Process Capable
Recommended Solder Pad Layout
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
0.50
0.02]
A
[
0.10
.004]
B
2.00 0.15
[.079 .006]
[
2.00 0.15
[.079 .006]
1.75 0.15
[.069 .006]
1.50 0.15
[.059 .006]
4.00 0.20
[.157 .008]
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
0.50 0.02
[.02 .001]
DIA TYP
2.00 0.20
[.079 .008]
108-57197
Packaging Method — Loose piece,
bag
Dimensions
Position
Part Numbers
A
B
4
4.0 [0.16]
6.0 [0.24]
2.0 [0.08]
4.0 [0.16]
1734507-4
1734507-6
6
8
8.0 [0.31]
6.0 [0.24]
1734507-8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
64.0 [2.52]
66.0 [2.60]
68.0 [2.68]
70.0 [2.76]
72.0 [2.83]
74.0 [2.91]
76.0 [2.99]
78.0 [3.07]
80.0 [3.15]
8.0 [0.31]
1-1734507-0
1-1734507-2
1-1734507-4
1-1734507-6
1-1734507-8
2-1734507-0
2-1734507-2
2-1734507-4
2-1734507-6
2-1734507-8
3-1734507-0
3-1734507-2
3-1734507-4
3-1734507-6
3-1734507-8
4-1734507-0
4-1734507-2
4-1734507-4
4-1734507-6
4-1734507-8
5-1734507-0
5-1734507-2
5-1734507-4
5-1734507-6
5-1734507-8
6-1734507-0
6-1734507-2
6-1734507-4
6-1734507-6
6-1734507-8
7-1734507-0
7-1734507-2
7-1734507-4
7-1734507-6
7-1734507-8
8-1734507-0
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
64.0 [2.52]
66.0 [2.60]
68.0 [2.68]
70.0 [2.76]
72.0 [2.83]
74.0 [2.91]
76.0 [2.99]
78.0 [3.07]
4
Note: All part numbers are RoHS
compliant.
67
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Right-Angle Mount
0.5 [.02] Square
Right-Angle Posts
TYP
TYP
TYP
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Posted Contacts — Brass, duplex
plated as follows:
0.5
.02
TYP
]
[
A — 0.00020 [.000008] min. gold on
contact area, 0.00100 [.000039] min.
tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel
B — 0.00076 [.000030] min. gold on
contact area, 0.00100 [.000039] min.
tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel
L
Tin-Lead
Plated
Area
DIA TYP
DIA TYP
0.5
.02
[
]
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-5296
2.0 0.08*
.003]
Packaging Method — Loose piece,
bag
[
.08
Typ.
TYP
4
DIA TYP
DIA TYP
Recommended PC Board Hole Layout
* Hole centerline to be 2.0 0.08 [.08 .003]; tolerances
not to accumulate within one connector pattern.
Contact Plating
Lead Length L = 2.6[.10]**
No.
of
Positions
Dimensions
A
B
A
B
4
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
2.0 [0.08]
4.0 [0.16]
6.0 [0.24]
5176837-1
5176837-2
5176837-3
5176837-4
5176837-5
5176837-6
5176837-7
—
2-5176837-5
2-5176837-6
—
6
8
10
12
14
16
18
20
22
26
30
32
34
36
38
40
42
44
46
48
50
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
26.0 [1.02]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
8.0 [0.31]
—
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
24.0 [0.94]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
—
3-5176837-0
—
3-5176837-2
3-5176837-3
3-5176837-4
—
—
—
1-5176837-2
1-5176837-4
1-5176837-5
—
—
3-5176837-9
4-5176837-0
4-5176837-1
4-5176837-2
5-5176837-2
4-5176837-4
—
—
1-5176837-8
1-5176837-9
2-5176837-0
2-5176837-1
2-5176837-2
2-5176837-3
2-5176837-4
4-5176837-6
4-5176837-7
4-5176837-8
68
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Vertical Mount
0.5 [.02] Square
Straight Posts
Material and Finish
Housing — Black thermoplastic,
UL 94V-0 rated
Posted Contacts — Brass, duplex
plated as follows:
Plating A — 0.00020 [.000008] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel
Plating B — 0.00076 [.000030] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel
0.5
[.02]
0.5
[.02]
Typ.
Dia. Typ.
4.0
[.16]
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-5296
Packaging Method — Loose piece,
bag
L
Tin Plated
Area
Dia. Typ.
4
0.08
.00ꢀ
2.0
[.08
*
]
Typ.
Recommended PC Board Hole Layout
* Hole centerline to be 2.0 0.08 [.08 .003]; tolerances
not to accumulate within one connector pattern.
69
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Vertical Mount (Continued)
0.5 [.02] Square
Straight Posts
Contact Plating
No.
of
Positions
Dimensions
Lead Length L = 1.5 [.06]
Lead Length L = 2.6 [.10]
Plating A
A
B
Plating A
Plating B
Plating B
1-5176264-6
1-5176264-7
1-5176264-8
1-5176264-9
2-5176264-0
2-5176264-1
2-5176264-2
2-5176264-3
2-5176264-4
2-5176264-5
2-5176264-6
—
4
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
2.0 [0.08]
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
5178751-1
—
2-5178751-5
2-5178751-6
2-5178751-7
2-5178751-8
2-5178751-9
3-5178751-0
3-5178751-1
3-5178751-2
3-5178751-3
3-5178751-4
3-5178751-5
3-5178751-6
3-5178751-7
3-5178751-8
3-5178751-9
4-5178751-0
4-5178751-1
4-5178751-2
4-5178751-3
4-5178751-4
4-5178751-5
4-5178751-6
4-5178751-7
4-5178751-8
5176264-1
5176264-2
5176264-3
5176264-4
5176264-5
5176264-6
5176264-7
5176264-8
5176264-9
1-5176264-0
1-5176264-1
—
6
8
—
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
5178751-4
—
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
5178751-6
—
5178751-8
5178751-9
1-5178751-0
1-5178751-1
1-5178751-2
—
1-5176264-3
1-5176264-4
1-5176264-5
—
—
1-5178751-4
1-5178751-5
1-5178751-6
1-5178751-7
1-5178751-8
1-5178751-9
2-5178751-0
2-5178751-1
2-5178751-2
2-5178751-3
2-5178751-4
2-5176264-9
—
4-5176264-0
4-5176264-1
—
3-5176264-2
3-5176264-3
3-5176264-4
—
—
—
4
3-5176264-6
—
4-5176264-5
4-5176264-6
4-5176264-7
4-5176264-8
—
3-5176264-9
Note: All part numbers are RoHS compliant.
70
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,
Vertical Mount
0.5 [.02] Square Straight
Posts
A
0.50 0.03
[.02 .002] TYP
B
2.00
[.08] TYP
Material and Finish
Housing — Black polyphenylene
1.00 [.04]
0.00
1.00 [.04]
0.05
[.003]
-0.00
sulfide, UL 94V-0 rated
4.20
[.17]
Posted Contacts — Phosphor bronze,
plated as follows, Duplex plated 0.00020
[.000008] min. gold on contact area,
0.00200 [.000079] min. tin on solder
area, with entire contact underplated
0.00130 [.000051] min. nickel
1.40 MAX
[.06] TYP
4.20 0.05
[.17 .003]
Vacuum Cap
0.50 0.02
[.02 .001]
TYP
C
0.50 0.02
[.02 .001] TYP
0.10
[.004]
Related Product Data
Mateable Receptacles —
RO.50
REF
D
[.01]
0.25
pages 80-84
7.00 0.02
[.28 .001]
Product Specification
108-51001
1.50 [.06]
1.00 [.04]
Packaging Method — Tape & Reel
0.50 0.02
[.02 .001] TYP
Tin-Lead
Plating Area
2.00
[.08]
B
0.08 [.003]
Tolerances Non-Cumulative
1.00 0.08
[.04 .003] TYP
4
2.00
[.08] TYP
Recommended Solder Pad Layout
Dimensions
No. of
Part
Positions
Numbers
5084476-1
5084476-2
5084476-7
5084476-3
A
B
C
4
6
4.0 [0.16]
6.0 [0.24]
12.0 [0.47]
16.0 [0.63]
2.0 [0.08]
4.0 [0.16]
10.0 [0.39]
14.0 [0.55]
4.0 [0.16]
6.0 [0.24]
5.0 [0.20]
8.0 [0.31]
12
16
Note: All part numbers are RoHS compliant.
71
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,
Vertical Mount (Continued)
0.5 [.02] Square Straight
Posts
A
3.8
[.150]
Material and Finish
B
Housing — Black polyphenylene
sulfide, UL 94V-0 rated
Posted Contacts — Phosphor bronze,
plated as follows, Duplex plated 0.0076
[.000030] min. gold on contact area,
0.00254-0.00406 [.000100-.000160]
min. tin on solder area, with entire
contact underplated 0.00127 [.000050]
min. nickel
6.5 0.25
[.256 .010]
2.00
[.079] TYP
0.50
[.02]
TYP
Related Product Data
Mateable Receptacles —
pages 80-84
4.5
[.177]
Product Specification
108-18544
3.45
[.136]
Packaging Method — Tape & Reel
0.9
[.035]
C
B
0.08 [.003]
4
Tolerances Non-Cumulative
1.00 0.08
[.04 .003] TYP
0.50
[.020]
TYP
3.75
[.148]
TYP
2.00
[.08] TYP
Recommended Solder Pad Layout
Dimensions
B
No. of
Positions
Part
Numbers
A
C
4
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
2.0 [0.08]
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
7.60 [0.30]
9.60 [0.38]
11.60 [0.46]
13.60 [0.53]
15.60 [0.61]
17.60 [0.69]
19.60 [0.77]
21.60 [0.85]
23.60 [0.93]
25.60 [1.01]
27.60 [1.09]
966926-2
966926-3
966926-4
966926-5
966926-6
966926-7
966926-8
966926-9
1-966926-0
1-966926-1
1-966926-2
6
8
10
12
14
16
18
20
22
24
Note: All part numbers are RoHS compliant.
72
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Stacking Header, Unshrouded, Double Row, Thru-Hole,
Vertical Mount
0.5 [.02] Square Straight
Posts
0.5 0.03
[0.02 .001]
2.54
[.100]
12 Position
Part Number 1734770-1
2.0
[.079]
Material and Finish
9.75
[.384]
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
Gold flash all over contact underplated
0.00127 [.000050] min. nickel
2.0
[.079]
2.0
[.079]
TYP
2.54
[.100]
4.0
[.157]
Related Product Data
10.0
[.039]
Mateable Receptacles —
pages 80-84
12.0
[.047]
Product Specification
108-57331
Packaging Method — Loose piece,
bag
2.0
[.079]
0.8 0.05
[0.31 .002]
12 Places
TYP
DIA
4
10.0
[.394]
2.0
[.079]
TYP
Note: All part numbers are RoHS compliant.
73
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
0.50
0.5 [.02] Square Right-Angle
Posts
Ref.
[.02]
6.65
[.262]
26 Position
Part Number 5084780-1
0.50 0.03
[0.02 .001]
3.60
[.142]
Material and Finish
Housing — High temperature, black
thermoplastic, UL 94 V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
28.65
[1.128]
+0.10
-0.05
+.004
-.002
27.15
[1.069]
0.00038 [.000015] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
2.00 24.00
[.079] [.945]
2.325
[.092]
3.60
[.142]
12 Spaces x
=
2 Places
TYP
0.75
2.00
[.079]
2.54
Ref.
[.03]
2.00
[.079]
+0.51
-0.25
+.02
-.01
[.100]
2.99
[.118]
0.50 0.03
[0.02 .001]
6.30
[.248]
Soldertail
TYP at
+0.01
-0.05
+.000
-.002
Post Tips
Related Product Data
1.40
[.055]
0.75
[.03]
4.80 +0.01/-0.22
[.189 +.004/-.009]
Mateable Receptacles —
pages 80 and 84
6.40 0.20
[.252 .008]
0.50 TYP at
[.079] Post Tips
0.50 TYP at
[.079] Post Tips
Product Specification
108-5296
2.00
Packaging Method — Tube
[.079]
4
4.10
[.161]
2.00 0.05
[.079 .002]
Tolerance
Non-Cumulative
2.00 0.05
[.079 .002]
TYP
TYP
0.90 0.05
[.035 .002]
TYP
Recommended PCB Layout
Note: All part numbers are RoHS compliant.
74
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
(Continued)
0.20
C
0.5 [.02] Square Right-Angle
Posts
[
.008]
0.20
.008]
B
[
0.10
A
[
.004]
0.10
.004
2.00
[.079
Material and Finish
]
Housing — Natural color thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, plated as
follows:
0.0ꢀ
.00ꢀ
2.00
[.079
0.1ꢀ
.006
ꢀ.ꢀ0
[.ꢀ17
0.00020 [.000008] min. gold on contact
area, with 0.00254 [.00010] tin on
soldertails, with entire contact
underplated 0.00127 [.000050] min.
nickel
2.40
[.094]
]
]
0.1ꢀ
.006
4.ꢀ0
[.177
]
0.1ꢀ
.006
ꢀ.60
[.ꢀꢀ0
0.20
.008
6.6ꢀ
[.ꢀ6ꢀ
]
]
0.20
.008
3.60
[.14ꢀ
]
Related Product Data
Mateable Receptacles —
pages 80 and 84
0.02
.001
0.10
.004
0.ꢀ0
[.0ꢀ0
0.20
.008
]
2.00
[.079
3.00
[.118
Sq.
]
]
A
Product Specification
108-57197
2.00
[.079]
Typ.
2.00
[.079]
Typ.
Packaging Method — Tubes
Ø 0.80
[.031]
Recommended PCB Layout
4
Dimensions
B
No. of
Positions
Part Numbers
A
C
8
6.0 [0.24]
8.0 [0.31]
8.85 [0.35]
10.85 [0.43]
12.85 [0.51]
14.85 [0.58]
16.85 [0.66]
18.85 [0.74]
20.85 [0.82]
22.85 [0.90]
24.85 [0.98]
26.85 [1.06]
28.85 [1.14]
30.85 [1.21]
32.85 [1.29]
34.85 [1.37]
36.85 [1.45]
38.85 [1.53]
40.85 [1.61]
42.85 [1.69]
44.85 [1.77]
46.85 [1.84]
48.85 [1.92]
50.85 [2.00]
52.85 [2.08]
54.85 [2.16]
56.85 [2.34]
58.85 [2.32]
60.85 [2.40]
62.85 [2.47]
64.85 [2.55]
9.95 [0.39]
11.95 [0.47]
13.95 [0.55]
15.95 [0.63]
17.95 [0.71]
19.95 [0.79]
21.95 [0.86]
23.95 [0.94]
25.95 [1.02]
27.95 [1.10]
29.95 [1.18]
31.95 [1.26]
33.95 [1.34]
35.95 [1.42]
37.95 [1.49]
39.95 [1.57]
41.95 [1.65]
43.95 [1.73]
45.95 [1.81]
47.95 [1.89]
49.95 [1.97]
51.95 [2.05]
53.95 [2.12]
55.95 [2.20]
57.95 [2.28]
59.95 [2.36]
61.95 [2.44]
63.95 [2.52]
65.95 [2.60]
1734493-8
1-1734493-0
1-1734493-2
1-1734493-4
1-1734493-6
1-1734493-8
2-1734493-0
2-1734493-2
2-1734493-4
2-1734493-6
2-1734493-8
3-1734493-0
3-1734493-2
3-1734493-4
3-1734493-6
3-1734493-8
4-1734493-0
4-1734493-2
4-1734493-4
4-1734493-6
4-1734493-8
5-1734493-0
5-1734493-2
5-1734493-4
5-1734493-6
5-1734493-8
6-1734493-0
6-1734493-2
6-1734493-4
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
Note: All part numbers are RoHS compliant.
75
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount
C
B
0.5 [.02] Square Posts
Material and Finish
A
0.10
2.00
[.079
5.50
[.217]
.004
]
Housing — Black color, PA9T (Nylon
9T), UL 94 V-O Rated
Posted Contacts — Brass, plated as
follows:
0.00076 [.000003] min. gold on contact
area, with 0.00254 [.00010] matte tin on
soldertails, with entire contact
underplated 0.00127 [.000050] min.
nickel
4.50
[.177]
0.05
.001
2.00
[.079
Pitch
]
2.40
[.094]
5.20
[.205]
1.20
[.047]
Ref.
Ref.
Cap
8.00
[.315]
Related Product Data
Ref.
0.15
.006
5.60
[.220
0.15
.005
3.60
[.142
]
Mateable Receptacles —
pages 80, 81, and 84
]
6.50
[.256]
.0.50
[.020]
0.15
.005
2.60
[.102
0.25
6.70
[.264
]
.010
]
22.00
[.866]
2.00
[..079]
Pitch
1.00
[25.4]
4
7.50
[1.38]
1.30
[.051]
Typ.
Recommended PCB Layout
Dimensions
B
No. of
Positions
Part Numbers
A
C
8
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
8.85 [0.35]
10.85 [0.43]
12.85 [0.51]
14.85 [0.58]
16.85 [0.66]
18.85 [0.74]
20.85 [0.82]
22.85 [0.90]
24.85 [0.98]
26.85 [1.06]
28.85 [1.14]
30.85 [1.21]
32.85 [1.29]
34.85 [1.37]
36.85 [1.45]
38.85 [1.53]
40.85 [1.61]
42.85 [1.69]
44.85 [1.77]
46.85 [1.84]
48.85 [1.92]
50.85 [2.00]
9.95 [0.39]
11.95 [0.47]
13.95 [0.55]
15.95 [0.63]
17.95 [0.71]
19.95 [0.79]
21.95 [0.86]
23.95 [0.94]
25.95 [1.02]
27.95 [1.10]
29.95 [1.18]
31.95 [1.26]
33.95 [1.34]
35.95 [1.42]
37.95 [1.49]
39.95 [1.57]
41.95 [1.65]
43.95 [1.73]
45.95 [1.81]
47.95 [1.89]
49.95 [1.97]
51.95 [2.05]
2041068-8
1-2041068-0
1-2041068-2
1-2041068-4
1-2041068-6
1-2041068-8
2-2041068-0
2-2041068-2
2-2041068-4
2-2041068-6
2-2041068-8
3-2041068-0
3-2041068-2
3-2041068-4
3-2041068-6
3-2041068-8
4-2041068-0
4-2041068-2
4-2041068-4
4-2041068-6
4-2041068-8
5-2041068-0
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
Note: All part numbers are RoHS compliant.
76
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount
(Continued)
0.5 [.02] Square Straight
Posts
A
1.91 0.05
[0.75 .002]
Material and Finish
2 Plc.
2.00
[.079]
6.2
[.244]
Housing — Black high temperature
thermoplastic, UL 94 V-O Rated
6.35
[.250] [.277]
7.04
Posted Contacts — Phosphor Bronze,
duplex plated as follows:
0.00076[0.000030] min. gold on contact
area, 0.00381[.000150] min. tin on
solder area, with entire contact
underplated 0.00127[.000050] min.
nickel
B
C
4.0
[.157]
3.6
[.142]
Vacuum Adapter Cap
Product Specification
108-57328
1.91 0.05
[0.75 .002]
3.02
[.119]
Packaging Method — Tape and reel
4.50
[.177]
2.00
[.079]
2.00
[.079]
TYP
1.09
2 Plc.
[.043]
1.4
[.055]
2 Plc.
0.51
[.020]
TYP
D
2.00
[.079]
1.2
[.047]
TYP
4
TYP
7.56
[.298]
TYP
1.20
[.047]
2 Plc.
1.14
[.045]
TYP
D
Recommended PCB Layout
Dimensions
No. of
Positions
Part Numbers
A
B
C
D
20
30
26.2 [1.03]
36.2 [1.43]
20.0 [0.79]
30.0 [1.18]
24.3 [0.96]
34.3 [1.35]
16.0 [.63]
26.0 [1.02]
2-1734569-0
3-1734569-0
Note: All part numbers are RoHS compliant.
77
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Thru-Hole, Vertical Mount
0.5 [.02] Square Straight
Posts with Cable Shroud
1.15
[.045]
2.0
[.079]
TYP
Material and Finish
4.3
[.169]
Housing — Black thermoplastic,
UL 94 V-O Rated
2.0
[.079]
TYP
1.35
[.053]
Posted Contacts — Brass, duplex
TYP
plated as follows:
A
[
0.25
.010]
0.00254 [.000100] min. tin on contact
area, with entire contact underplated
0.00127 [.000050] min. nickel
C
+0.2/-0.05
[+.008/-.002]
Related Product Data
B
0.3
5.00
[1.97]
[
.012]
0.8
[.031]
Mateable Receptacles —
See Drawings 1470106 Contacts and
1470107 Housing
0.95
[.037]
3.0 0.2
TYP
[.118 .008]
1.60
[0.63]
TYP
Product Specification
6.5
[.256]
108-57217
3.5
[.138]
Packaging Method — Loose piece,
bag
0.5 0.05
[.02 .002]
A
2.00
[.08]
TYP
0.7 0.1
[.028 .004]
4
Recommended PCB Layout
Dimensions
B
No. of
Position
Part Numbers
A
C
6
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
6.74 [0.26]
8.74 [0.34]
1470109-6
1470109-8
8
10
12
14
16
18
20
22
24
26
28
30
32
10.74 [0.42]
12.74 [0.50]
14.74 [0.58]
16.74 [0.66]
18.74 [0.74]
20.74 [0.82]
22.74 [0.89]
24.74 [0.97]
26.74 [1.05]
28.74 [1.13]
30.74 [1.21]
32.74 [1.29]
1-1470109-0
1-1470109-2
1-1470109-4
1-1470109-6
1-1470109-8
2-1470109-0
2-1470109-2
2-1470109-4
2-1470109-6
2-1470109-8
3-1470109-0
3-1470109-2
Note: All part numbers are RoHS compliant.
78
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
2.0
TYP
[.079]
0.5 [.02] Square Right-Angle
Posts with Cable Shroud
0.5 0.05
[.02 .002]
1.15
[.045]
Material and Finish
4.3
[.169]
Housing — Black thermoplastic,
UL 94 V-O Rated
1.35
[.053]
.079
[2.0]
TYP
Posted Contacts — Brass, duplex
A
[
0.25
.010]
plated as follows:
C +0.2/-0.05
[+.008/-.002]
0.00254 [.000100] min. tin on contact
area, with entire contact underplated
0.00127 [.000050] min. nickel
5.00
[1.97]
B
0.3
0.8
[.031]
[
.012]
Related Product Data
0.95
[.037]
TYP
Mateable Receptacles —
See Drawings 1470106 Contacts and
1470107 Housing
1.60
[0.63]
TYP
7.00
[.276]
9.5
[.374]
3.5
[.138]
Product Specification
108-57217
2.0 0.1
[.079 .004]
Packaging Method — Loose piece,
bag
3.0 0.2
[.118 .008]
2.00
[.08]
TYP
0.7 0.1
[.028 .004]
4
7.00
[.276]
Recommended PCB Layout
Dimensions
No. of
Position
Part Numbers
A
B
C
6
8
4.0 [0.16]
6.0 [0.24]
8.0 [0.32]
10.0 [0.39]
12.0 [0.47]
18.0 [0.71]
14.0 [0.55]
16.0 [0.63]
22.0 [0.87]
20.0 [0.79]
24.0 [0.94]
28.0 [1.10]
26.0 [1.02]
30.0 [1.18]
8.00 [0.31]
10.00 [0.39]
12.00 [0.47]
14.00 [0.55]
16.00 [0.63]
18.00 [0.71]
20.00 [0.79]
22.00 [0.87]
24.00 [0.94]
26.00 [1.02]
28.00 [1.10]
30.00 [1.18]
32.00 [1.26]
34.00 [1.34]
6.74 [0.26]
1470108-6
1470108-8
8.74 [0.34]
10.74 [0.42]
12.74 [0.50]
14.74 [0.58]
16.74 [0.66]
18.74 [0.74]
20.74 [0.82]
22.74 [0.89]
24.74 [0.97]
26.74 [1.05]
28.74 [1.13]
30.74 [1.21]
32.74 [1.29]
10
12
14
16
18
20
22
24
26
28
30
32
1-1470108-0
1-1470108-2
1-1470108-4
1-1470108-6
1-1470108-8
2-1470108-0
2-1470108-2
2-1470108-4
2-1470108-6
2-1470108-8
3-1470108-0
3-1470108-2
Note: All part numbers are RoHS compliant.
79
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount
Receptacle, Thru-Hole,
Vertical
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated, 245°C Reflow
A
[
0.25
.01]
B
0.2
Contacts — Copper alloy, plated as
follows:
[
.008]
A — 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B — 0.00076 [.000030] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
2.0 0.1
[.079 .004]
0.36
[.014]
4.00
[.157]
4.50
[.177]
L
0.1
[
.004]
1.67
[.066]
Ref.
0.5
[.02]
0.5
[.02]
Related Product Data
Mateable Headers —
0.20
[.008]
2.0 0.1
[.079 .004]
TYP
TYP
pages 66-76, 78, 79
0.75 0.05
[.030 .002]
TYP
Product Specification
108-57197
Packaging Method — Tray
2.0 0.05
[.079 .002]
2.0 0.05
[.079 .002]
TYP
4
TYP
Recommended PCB Layout
Part Numbers
Plating A
Plating B
Dimensions
No. of
Positions
Dim. L
Dim. L
Dim. L
1.2+/-0.1
Dim. L
A
B
1.2+/-0.1
2.6+/-0.1
2.6+/-0.1
(.047+/-.004)
1470209-1
(.102+/-.004)
2-1470209-5
2-1470209-6
2-1470209-7
2-1470209-8
2-1470209-9
3-1470209-0
3-1470209-1
3-1470209-2
3-1470209-3
3-1470209-4
3-1470209-5
3-1470209-6
3-1470209-7
3-1470209-8
3-1470209-9
4-1470209-0
4-1470209-1
4-1470209-2
4-1470209-3
4-1470209-4
4-1470209-5
4-1470209-6
4-1470209-7
4-1470209-8
(.047+/-.004)
(.102+/-.004)
4
4.0 [.157]
6.0 [.236]
8.0 [.315]
2.0 [.079]
4.0 [.157]
6.0 [.236]
5-1470209-1
5-1470209-2
5-1470209-3
5-1470209-4
5-1470209-5
5-1470209-6
5-1470209-7
5-1470209-8
5-1470209-9
6-1470209-0
6-1470209-1
6-1470209-2
6-1470209-3
6-1470209-4
6-1470209-5
6-1470209-6
6-1470209-7
6-1470209-8
6-1470209-9
7-1470209-0
7-1470209-1
7-1470209-2
7-1470209-3
7-1470209-4
7-1470209-5
7-1470209-6
7-1470209-7
7-1470209-8
7-1470209-9
8-1470209-0
8-1470209-1
8-1470209-2
8-1470209-3
8-1470209-4
8-1470209-5
8-1470209-6
8-1470209-7
8-1470209-8
8-1470209-9
9-1470209-0
9-1470209-1
9-1470209-2
9-1470209-3
9-1470209-4
9-1470209-5
9-1470209-6
9-1470209-7
9-1470209-8
6
1470209-2
8
1470209-3
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
50.0 [1.969]
8.0 [.315]
1470209-4
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
1470209-5
1470209-6
1470209-7
1470209-8
1470209-9
1-1470209-0
1-1470209-1
1-1470209-2
1-1470209-3
1-1470209-4
1-1470209-5
1-1470209-6
1-1470209-7
1-1470209-8
1-1470209-9
2-1470209-0
2-1470209-1
2-1470209-2
2-1470209-3
2-1470209-4
Note: All part numbers are RoHS compliant.
80
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount (Continued)
Receptacle, Thru-Hole,
Vertical
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated, 265°C Process Capable
A
[
0.25
.01]
B
0.2
Contacts — Copper alloy, plated as
follows:
[
.008]
A — 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B — 0.00076 [.000030] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
2.0 0.1
[.079 .004]
0.36
[.014]
4.00
[.157]
4.50
[.177]
L
0.1
[
.004]
1.67
[.066]
Ref.
0.5
[.02]
0.5
[.02]
Related Product Data
Mateable Headers —
pages 66-76, 78, 79
0.20
[.008]
2.0 0.1
[.079 .004]
TYP
TYP
0.75 0.05
[.030 .002]
TYP
Product Specification
108-57197
Packaging Method — Tray
2.0 0.05
[.079 .002]
2.0 0.05
[.079 .002]
TYP
TYP
4
Recommended PCB Layout
Part Numbers
Plating A
Plating B
Dimensions
No. of
Positions
Dim. L
1.2+/-0.1
Dim. L
Dim. L
1.2+/-0.1
Dim. L
A
B
2.6+/-0.1
2.6+/-0.1
(.047+/-.004)
1734506-1
1734506-2
1734506-3
1734506-4
1734506-5
1734506-6
1734506-7
1734506-8
1734506-9
1-1734506-0
1-1734506-1
1-1734506-2
1-1734506-3
1-1734506-4
1-1734506-5
1-1734506-6
1-1734506-7
1-1734506-8
1-1734506-9
2-1734506-0
2-1734506-1
2-1734506-2
2-1734506-3
2-1734506-4
—
(.102+/-.004)
2-1734506-5
2-1734506-6
2-1734506-7
2-1734506-8
2-1734506-9
3-1734506-0
3-1734506-1
3-1734506-2
3-1734506-3
3-1734506-4
3-1734506-5
3-1734506-6
3-1734506-7
3-1734506-8
3-1734506-9
4-1734506-0
4-1734506-1
4-1734506-2
4-1734506-3
4-1734506-4
4-1734506-5
4-1734506-6
4-1734506-7
4-1734506-8
4-1734506-9
(.047+/-.004)
(.102+/-.004)
4
4.0 [.157]
6.0 [.236]
8.0 [.315]
2.0 [.079]
4.0 [.157]
6.0 [.236]
5-1734506-1
5-1734506-2
5-1734506-3
5-1734506-4
5-1734506-5
5-1734506-6
5-1734506-7
5-1734506-8
5-1734506-9
6-1734506-0
6-1734506-1
6-1734506-2
6-1734506-3
6-1734506-4
6-1734506-5
6-1734506-6
6-1734506-7
6-1734506-8
6-1734506-9
7-1734506-0
7-1734506-1
7-1734506-2
7-1734506-3
7-1734506-4
—
7-1734506-5
7-1734506-6
7-1734506-7
7-1734506-8
7-1734506-9
8-1734506-0
8-1734506-1
8-1734506-2
8-1734506-3
8-1734506-4
8-1734506-5
8-1734506-6
8-1734506-7
8-1734506-8
8-1734506-9
9-1734506-0
9-1734506-1
9-1734506-2
9-1734506-3
9-1734506-4
9-1734506-5
9-1734506-6
9-1734506-7
9-1734506-8
9-1734506-9
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
40*
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
50.0 [1.969]
40.0 [1.575]
8.0 [.315]
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
38.0 [1.496]
*Keying position 6.
Note: All part numbers are RoHS compliant.
81
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Receptacle, Double Row, Surface Mount, Right-Angle Mount
Receptacle, Surface Mount,
Right-Angle
Material and Finish
Housing — Black Thermoplastic,
UL 94V-0 Rated
Contact — Phosphor Bronze
0.60 0.05
[.024 .002]
TYP
Contact Finish — 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00229 [.000090] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min.
Nickel Underplated Over All
A
[
0.25
.01]
B
0.10
[
.004]
2.00 0.05
[.079 .002]
5.0 0.2
[.197 .008]
1.10
[.042]
TYP
Related Product Data
0.15 0.03
[.006 .001]
2.00
[.079]
Mateable Headers — pages 66-73
4.90 0.25
[.193 .01]
4.90 0.25
[.193 .01]
Product Specification
108-57197
4.00
[.157]
Packaging Method — Tape and reel
8.30 0.5
[.327 .02]
0.90
[.035]
2.00
[.079]
TYP
B
9.00
[.354]
4.00
[.157]
TYP
4
1.00
[.039]
TYP
Recommended PCB Layout
Dimensions
Position
Part Numbers
A
B
6
6.20 [.244]
8.20 [.323]
10.20 [.402]
12.20 [.480]
14.20 [.559]
16.20 [.638]
18.20 [.717]
20.20 [.795]
22.20 [.874]
24.20 [.953]
26.20 [1.031]
28.20 [1.110]
30.20 [1.189]
32.20 [1.268]
34.20 [1.346]
36.20 [1.425]
38.20 [1.504]
40.20 [1.583]
42.20 [1.661]
44.20 [1.740]
46.20 [1.819]
48.20 [1.898]
50.20 [1.976]
4.0 [.157]
6.0 [.236]
8.0 [.315]
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
1734606-6
1734606-8
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
1-1734606-0
1-1734606-2
1-1734606-4
1-1734606-6
1-1734606-8
2-1734606-0
2-1734606-2
2-1734606-4
2-1734606-6
2-1734606-8
3-1734606-0
3-1734606-2
3-1734606-4
3-1734606-6
3-1734606-8
4-1734606-0
4-1734606-2
4-1734606-4
4-1734606-6
4-1734606-8
5-1734606-0
Note: All part numbers are RoHS compliant.
82
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Receptacle, Double Row, Thru-Hole, Right-Angle Mount
Receptacle, Thru-Hole,
Right-Angle
0.35
[.014]
7.2 0.15
[.283 .006]
A
4.85 0.15
[.191 .006]
Material and Finish
Housing — Black Thermoplastic,
UL 94V-0 Rated
Contact — Phosphor Bronze
Contact Finish — 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00254 [.000100] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min.
Nickel Underplated Over All
3
0.02
1.45
[.057]
2
0.05
[.118 .001]
[.079 .002]
A
0.5 0.05
[.02 .002]
1.5 0.05
[.059 .002]
0.2 0.03
[.008 .001]
2
0.15
5.2
[.205]
[.079 .006]
A
[
0.10
.004]
2.00
B
0.20
[.079]
[
.008]
Section A-A
2.00
[.079]
TYP
Related Product Data
A
2.00
[.079]
TYP
Mateable Headers — pages 66-73
Product Specification
108-57197
.080
[.031]
DIA TYP
Packaging Method — Tube
Recommended PCB Layout
Dimensions
Position
Part Numbers
A
B
8
6.0 [.236]
8.0 [.315]
8.50 [.335]
10.50 [.413]
12.50 [.492]
14.50 [.571]
16.50 [.650]
18.50 [.728]
20.50 [.807]
22.50 [.886]
24.50 [.965]
26.50 [1.043]
28.50 [1.122]
30.50 [1.201]
32.50 [1.280]
34.50 [1.358]
36.50 [1.437]
38.50 [1.516]
40.50 [1.594]
42.50 [1.673]
44.50 [1.752]
46.50 [1.831]
48.50 [1.909]
50.50 [1.988]
52.50 [2.067]
54.50 [2.146]
56.50 [2.224]
58.50 [2.303]
60.50 [2.381]
62.50 [2.461]
64.50 [2.539]
66.50 [2.618]
68.50 [2.697]
70.50 [2.776]
72.50 [2.854]
74.50 [2.933]
76.50 [3.012]
78.50 [3.091]
80.50 [3.169]
1734531-8
1-1734531-0
1-1734531-2
1-1734531-4
1-1734531-6
1-1734531-8
2-1734531-0
2-1734531-2
2-1734531-4
2-1734531-6
2-1734531-8
3-1734531-0
3-1734531-2
3-1734531-4
3-1734531-6
3-1734531-8
4-1734531-0
4-1734531-2
4-1734531-4
4-1734531-6
4-1734531-8
5-1734531-0
5-1734531-2
5-1734531-4
5-1734531-6
5-1734531-8
6-1734531-0
6-1734531-2
6-1734531-4
6-1734531-6
6-1734531-8
7-1734531-0
7-1734531-2
7-1734531-4
7-1734531-6
7-1734531-8
8-1734531-0
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
50.0 [1.969]
52.0 [2.047]
54.0 [2.123]
56.0 [2.205]
58.0 [2.283]
60.0 [2.362]
62.0 [2.441]
64.0 [2.520]
66.0 [2.598]
68.0 [2.677]
70.0 [2.756]
72.0 [2.834]
74.0 [2.913]
76.0 [2.992]
78.0 [3.071]
4
Note: All part numbers are RoHS compliant.
83
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Receptacle, Double Row, Surface Mount, Vertical Mount
Receptacle, Top Entry,
Surface Mount
B
[
0.20
.008]
A
[
0.10
.004]
2.00 0.05
X
X
[.079 .002]
Material and Finish
Housing—Black Thermoplastic,
UL 94V-0 Rated
Contact—Copper Alloy, plated 0.00076
[.000030] Min. Gold Plated on Contact
Area, 0.00254 [.000100] Tin Plated on
Solder Tail, Underplated 0.00127
[.000050] Nickel
4.00 0.15
[.157 .006]
0.50 0.05
[.020 .002]
2.00 0.05
[.079 .002]
6.00 0.15
[.236 .006]
2.00
[.079]
B—8.00/2.00 2.00
[.315/.079 .079]
8.00 0.15
[.315 .006]
+0.25
4.70
4.80 0.15
[.189 .006]
Cavity Mark
Location
-0.13
Cap—Thermoplastic
4.25 0.15
[.167 .006]
+0.01
-.005
[.185
]
0.71 0.05
[.028 .002]
0.40 0.05
[.016 .002]
Alignment Peg 2
Plc. Ref.
2 Plc.
0.96 0.10
[.038 .004]
Related Product Data
Mateable Headers—pages 66-75,
78, 79
5.10 0.50
[.201 .020]
A+2.00 0.10
[.079 .004]
0.20 0.03
[.008 .001]
1a
1b
Product Specification
108-57227
Packaging Method—Tape and reel
2.00
[.079]
2.00
[.079]
TYP
TYP
A
A
2.25
[.089]
2.25
[.089]
1.12
[.044]
1.12
[.044]
6.00
[.236]
6.00
[.236]
0.85 0.05
A+2.00
4
[.033 .002] DIA TYP
2 Plc.
[+.079]
Recommended PCB Layout
(Without Alignment Peg)
Recommended PCB Layout
Dimensions
245C Reflow Part Numbers
265C Reflow Part Numbers
with Alignment Peg*
Position
A
B
with Alignment Peg*
1734516-8
without Alignment Peg
5-1734516-8
6-1734516-0
6-1734516-2
6-1734516-4
6-1734516-6
6-1734516-8
7-1734516-0
7-1734516-2
7-1734516-4
7-1734516-6
7-1734516-8
8-1734516-0
8-1734516-2
8-1734516-4
8-1734516-6
8-1734516-8
9-1734516-0
without Alignment Peg
5-2041069-8
6-2041069-0
6-2041069-2
6-2041069-4
6-2041069-6
6-2041069-8
7-2041069-0
7-2041069-2
7-2041069-4
7-2041069-6
7-2041069-8
8-2041069-0
8-2041069-2
8-2041069-4
8-2041069-6
8-2041069-7
9-2041069-0
8
6.0 [.236]
8.0 [.315]
8.40 [.331]
10.40 [.409]
2041069-8
1-2041069-0
1-2041069-2
1-2041069-4
1-2041069-6
1-2041069-8
2-2041069-0
2-2041069-2
2-2041069-4
2-2041069-6
2-2041069-8
3-2041069-0
3-2041069-2
3-2041069-4
3-2041069-6
3-2041069-8
4-2041069-0
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
1-1734516-0
1-1734516-2
1-1734516-4
1-1734516-6
1-1734516-8
2-1734516-0
2-1734516-2
2-1734516-4
2-1734516-6
2-1734516-8
3-1734516-0
3-1734516-2
3-1734516-4
3-1734516-6
3-1734516-8
4-1734516-0
10.0 [.394] 12.40 [.488]
12.0 [.472] 14.40 [.567]
14.0 [.551] 16.40 [.646]
16.0 [.630] 18.40 [.724]
18.0 [.709] 20.40 [.803]
20.0 [.787] 22.40 [.881]
22.0 [.866] 24.40 [.961]
24.0 [.945] 26.40 [1.039]
26.0 [1.024] 28.40 [1.118]
28.0 [1.102] 30.40 [1.197]
30.0 [1.181] 32.40 [1.276]
32.0 [1.260] 34.40 [1.354]
34.0 [1.339] 36.40 [1.433]
36.0 [1.417] 38.40 [1.512]
38.0 [1.496] 40.40 [1.591]
*See views 1a and 1b
Note: All part numbers are RoHS compliant.
84
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Interconnection System
AMPMODU Headers and Receptacles, .100 [2.54] Centerline
87605-1
Bulkhead
6-534237-8
Header
SR Top Entry
6-535541-0
SR Top Entry
6-146257-0
DR VT BA
87220-8
SR VT
6-146281-0
SR VT BA
7-146268-5
DR VT-RET BA
87227-5
DR VT
102699-4
DR AP
6-146490-5
DR Stacking
Header
6-534206-0
DR Top Entry
5-103166-3
DR RA
6-146293-0
SR VT-RET BA
103336-5
SR AP
103577-3
5-103168-3
DR VT
87230-6
DR RA
103542-9
DR AP
5-103164-3
87232-9
SR RA
3/4 DR RA
5535512-1
DR HORZ
5-102203-7
SR RA
534267-1
DR Outrigger DE
6-146308-0
5-146427-5
DR RA-RET BA
DR RA BA
Legend:
SR
DR
VT
RA
RET
AP
BE
3/4
BA
TR
Single Row
Double Row
Vertical
Right Angle
Retention Feature
ACTION PIN
Bottom Entry
3-Sided-Shrouded Header
Breakaway
5-103414-8
5535676-9
SR HORZ
SR VT
6-534998-3
5
6-146306-0
SR RA-RET BA
DR Top Entry
5-146304-6
SR RA
5-87879-7
SR Bottom Entry
Triple Row
SMT Surface Mount
HORZ Horizontal
DE
Dual Entry
For drawings, technical data or samples, contact your TE sales engineer or call the TE Product Information Center: 1-800-522-6752
Note: All part numbers are RoHS compliant.
85
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Interconnection System (Continued)
AMPMODU Headers and Receptacles, .100 [2.54] Centerline
5-146134-9
5-146132-4
DR VT SMT
SR VT SMT
6-146474-0
SR Stacking Header
5-147720-9
SR Outrigger DE
5-535542-3
DR DE
5147722-9
SR HOR2 SMT
5-103817-2
TR VT
1-147070-1
.045 Sq. Continuous Post
5-147738-5
SR VT SMT DE
1-147333-1
.025 Sq. Continuous Post
6-147105-0
DR VT SMT DE
Legend:
5147721-4
SR HORZ SMT
SR
DR
VT
RA
RET
AP
BE
3/4
BA
TR
Single Row
Double Row
Vertical
Right Angle
Retention Feature
ACTION PIN
Bottom Entry
3-Sided-Shrouded Header
Breakaway
5
Triple Row
SMT Surface Mount
HORZ Horizontal
DE
Dual Entry
For drawings, technical data or samples, contact your TE sales engineer or call the TE Product Information Center: 1-800-522-6752
Note: All part numbers are RoHS compliant.
86
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Interconnection System
The AMPMODU intercon-
nection system provides
interconnections with a
unique modular concept,
utilizing precision formed
receptacle contacts and
mating posts.
Board mounted receptacle
assemblies are available in
various geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking
AMPMODU mating posts
are supplied typically as
headers. They are available
in various populations to
meet the interconnection
and packaging require-
ments of most systems.
However, in instances where
packaging configurations
do not lend themselves to
the economies of headers,
TE can provide application
equipment for the discrete
location of individual posts.
connection between two
subassemblies, such as a
power supply and an asso-
ciated subassembly.
It is also important to note
this product can serve as an
interconnection in more than
one level, depending on the
application.
capabilities.
Crimp snap-in pins for
Mating of the post and
receptacle contacts of
this system is very tolerant.
This is made possible by
a post with a burr-free
lead-in and a receptacle
contact featuring double
cantilever beams and anti-
overstress stops.
26-22 AWG [0.12-0.4 mm2]
wire and crimp snap-in
The .025 [0.64] square
interconnection system
receptacles for 32-20 AWG
[0.03-0.6 mm2] wire provide
excellent discrete wire
terminations. Housings for
these contacts provide ease
of handling terminations in
high density applications.
offers the most complete
line of post/receptacle pack-
aging products available
today. This system, rated at
3 amperes per contact, has
been used by almost every
industry and marketplace
over the last decade and is
one of the oldest, most ver-
satile and reliable intercon-
nection systems employing
.025 [0.64] square packag-
ing technology.
Looking at the electronic
industry's standard “levels of
packaging,” the AMPMODU
.025 [0.64] square intercon-
nection system is primarily
used in levels three and four.
AMPMODU receptacle
Machine applied termina-
tions, through matched
application equipment, are
geared for virtually any pro-
duction volume requirement,
for the lowest possible
applied cost.
contacts and posts categori-
cally fall into three general
classifications of products,
which include: board
In level three it is used as
a connection between two
or more printed circuits.
A mother/daughter board
connection is typical. In
level four it is used as a
mounted posts and recepta-
cle assemblies, post headers
and wire-applied contact
housings for crimp snap-in
pin and receptacle contacts.
Terms Explained
Insulation
Support
Barrel
The AMPMODU receptacle
cross-section is primarily
rectangular, with rounded
corners. Two integral canti-
lever beams contact the
mating square or round
male posts. Deflection of
these spring members is
limited by anti-overstress
stops, and excessive per-
manent deformation is pre-
vented. This feature allows
a wide range for
The configuration of the
receptacle completely
Receptacle Contacts
Wire
Crimp
Barrel
encloses the spring members
preventing damage during
handling and assembly and
makes the system compati-
ble with automatic applica-
tion techniques.
Note: Application of a contact lubricant is part
of the manufacturing process of all AMPMODU
tin-plated crimp products. However, it is not
part of the manufacturing process of products
that customers will solder, then clean. For
these products, TE recommends that
Rugged—self-
supporting
one-piece
5
contact body
Reliability—dual
cantilever spring
contact design
and built-in
anti-overstress
Wire entry for post to
receptacle misalignment
tolerance of misalignment
of mating contacts.
customers use contact lubricant.
See the TE web page for further information.
Offers standard, intermediate and
high pressure contact forces
Wide
Misalignment
Tolerance
Cantilever
Beams
Anti-overstress
Receptacle-Closed
Entry Housing Design
Contact edges
enclosed in
plastic
Metallic
post stop
Closed Entry
Contact edges
enclosed in
plastic
The closed entry housing
style better eliminates the
chance of a mating post
stubbing on the edges of
the receptacle contact.
Access Way
87
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Wire-to-Board, .100 [2.54] Centerline Products
Wire Sizes
Wire Size
Product Family
AWG
20
[mm2]
0.5-0.6
0.3-0.05
0.03
Locking Clip, Mod. IV, IV.v, V, MT, Short Point
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Mod. IV, IV.v, V, Short Point
22-30
32
Contact Platings
Platings
Product Family
.000015 [0.00038]
Mod. IV, IV.v, V, MTE, MT, Short Point
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Gold
.000030 [0.00076]
Gold
.000050 [0.00127]
Locking Clip, Mod. IV, IV.v, V, MT
Gold
Tin
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Mating Post Lengths
Post Lengths
Product Family
Mod. IV (.600 [15.24] Profile Height)
Mod. IV.v (.600 [15.24] Profile Height)
Mod.V (.600 [15.24] Profile Height)
Mod. IV (.645 [16.38] Profile Height)
Mod. IV.v (.645 [16.38] Profile Height)
Mod.V (.645 [16.38] Profile Height)
MT Assembly with Standard Pressure Contacts
MT Assembly with High Pressure Contacts
MTE Assembly
.210-.283 [5.33-7.19]
.205-.283 [5.21-7.19]
.185-.283 [4.70-7.19]
.256-.323 [6.50-8.20]
.251-.323 [6.38-8.20]
.231-.323 [5.87-8.20]
.222-.273 [5.64-6.93]
.200-.273 [5.08-6.93]
.200-.250 [5.08-6.35]
.169-.259 [4.29-6.58]
.273-.350 [6.93-8.89]
.200-.277 [5.08-7.04]
Short Point Connector Assembly
Locking Clip (Connector Assembly)
Locking Clip (Single Contact)
5
Application Tooling
Product Family
ApplicationTooling
Description
Mod. IV,
IV.v,V
Locking
Clip
Short
Point
MT
MTE
Level V
Manual Hand Tools (Wire Crimp)
Manual Hand Tools (IDC)
•
•
•
•
•
•
•
AMP-O-MATIC Stripper/Crimper
Machines with Applicator
•
•
•
CHAMPOMATOR
Model 2.5 Machine
CHAMPOMATOR
Model 3A Machine
AMP-O-LECTRIC
Machines with Applicator
Pneumatic Hand Tools
IDC Electric Power Unit
Tube-Fed Ribbon
Cable Machine
•
•
•
•
•
•
•
•
•
•
•
•
•
•
AMPOMATOR CLS Machines
Discrete Wire Machine
Manual Arbor Tool
•
•
•
•
•
•
•
•
•
Pneumatic Arbor Tool
88
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Board-to-Board Solutions Guide, .100 [2.54] Centerline Products
Single-Row
Vertical Headers
and Receptacles
(Page Ref.)
Single-Row
Right-Angle Headers,
Horizontal Receptacles
(Page Ref.)
Double-Row
Vertical Headers
and Receptacles
(Page Ref.)
Double-Row
Right-Angle Headers,
Horizontal Receptacles
(Page Ref.)
Problem or Concern
TE's
Potential Solution
HEADERS Retention Feature:
Unshrouded
Shrouded
Headers Float Off Board
Soldering Operation
102
—
103
—
198
104, 199
199
105, 200
Header Contacts Damaged
During Manufacturing
Operation or In-Field Use
Shrouded HEADERS:
Standard Profile
115
116
117-121
122-128
Press-Fit ACTION PIN POST
HEADERS:
Unshrouded
146
—
—
—
147
148, 149, 199
—
—
Shrouded
Machine Applied
Posts
163, 164
Board/Backplane Requires
High Temperature Surface-
Mount Compatibility
Surface-Mount Compatible Thru-Hole:
HEADERS:
Unshrouded
Shrouded
(Low Profile)
RECEPTACLES
102*
—
103*
—
104*
105*
138*
130,*137*
—
—
196*
195*
Surface-Mount:
HEADERS
RECEPTACLES
109*
187, 188
—
172
110
189-192
—
173
Application Requires Board
Guidance, Polarization and/or
Blind-Mate Capability
Two-Piece Family: w/Guide Posts:
HEADERS
RECEPTACLES
—
—
—
—
198, 199
196*
200
195*
Mod IV Low Profile
RECEPTACLES:
TOP ENTRY:
Thru-Hole
Surface-Mount
BOTTOM ENTRY:
Thru-Hole
Reduction in Parallel
Board-to-Board Stack Height
Necessary (Refer to Parallel
Stack Guide on Page 62.)
178
—
—
—
179, 180*
—
—
—
177
—
—
—
—
—
—
—
Surface-Mount
DUAL ENTRY
Thru-Hole
181
187, 188
—
—
182-184
189-192
—
—
Surface Mount
Soldering Problems with
Thru-Hole Bottom Entry
Receptacles (Must Mask
Post Holes in Board During
Soldering Operation)
RECEPTACLES:
Bottom Entry
Outrigger
181
—
182
—
(Separate Holes for
Receptacle Leads
and Mating Leads)
End-to-End Stackable:
HEADERS (Unshrouded):
Thru-Hole
Application Requires
93, 102
102*
94, 95, 103*
96, 97, 104*
104*
98. 99. 105
108*
Connectors to be End-to-End
Stackable on .100 [2.54] Grid
Thru-Hole*
103*
—
Surface-Mount
109*
110*
—
RECEPTACLES:
Thru-Hole
175, 177, 178, 181
188
169*
172
176, 179, 180*, 182*, 183, 184
191, 192
170
173
Surface Mount
*High temperature compatible version, refer to page ref. listed.
Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products
5
Customer Requirement
TE's Potential Solution
Mod IV Polarized Housing
Catalog Page(s)
220
MTE Latched Receptacle and Header
MT with Polarizing Covers
230, 231, 244-250
256-258
Application Requires
Guidance, Polarization
Short Point Polarized Housing
224
Wire-to-Wire Application
Wire-to-Wire Application (Latched)
Wire-to-Wire Application (Through Panel)
High Vibration and Shock Applications
Printed Circuit Board Polarization
Mod IV Receptacle Contacts and Pins
MTE Latched Receptacle and Shrouded Pin Assembly
MTE Panel Mount
211-213
230, 231, 236, 237
242
Locking Clip Contacts and Housings
MTE Header with PC Board Orientation Peg
MTE Surface Mount Headers
207-209
248, 249
251, 252
249, 250
Board Requires Surface Mount Capability
MTE High Temperature Compatible Headers
Need to mate to
AMP-LATCH Eject Headers
Mod IV Ejection Housing
220
MT with Eject Covers
Mod IV Housing with Strain Relief
256-259
218, 219
Need to Minimize Strain to Cable
Application Requires
207, 298
244-250
Locking Clip Contacts
Self-Retaining Contacts
Header Secured to Board
During/Prior to Soldering
MTE Headers with Post Retention or Holddowns
Mod IV plain Housing with Mod V Contacts
MTE with High Pressure Contacts
213, 214, 216
234, 235
Mate to Unshrouded Header
with Retention Requirements
Multiple Cables to be
240, 241
229, 256, 257, 259
222
MTE Coupling Shroud, Double- or Single-Row
MT with Hermaphroditic Covers
Short Point Contacts
Common to One Header
Right-Angle Cable Dress
Application Requires Crimp
Contacts and MTE Housings
Housings and End-to-End and
Side-to-Side Stackable
Connector Must Mate to
Post Lengths of .169 [4.29] Min.
Short Point Double-Row Housing,
MTE Plain Housing
223, 228, 229
222
Short Point Contacts
89
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mating Post Selection Guide
The following selection
Posts Without Shoulders
Posts With Shoulders
For product having the
shoulder of the post
extending above the hous-
ing or pc board surface
(ie, Standard AMPMODU
Shrouded and Unshrouded
Headers) the effective mat-
ing length starts at the top
of the shoulder.
guide is provided to help in
choosing a mating product
after a receptacle, header
or post has been selected.
For drawn wire products
(ie, AMPMODU Breakaway
and Low Profile Headers)
and for products having the
shoulder of the post below
the housing or pc board
surface (ie, AMPMODU
MTE and Single Row
Shrouded Headers) the
effective mating length
starts at the housing or
pc board surface.
In some instances refer-
ences are given on the cat-
alog page to specific mat-
ing connectors. In other
instances the reader is
referred here to the selec-
tion guide for mating prod-
uct recommendations.
Effective
Mating
Length
If your application require-
ment is not answered here,
consult TE for further
recommendations.
Effective
Mating
Length
Recommended
Effective
Mating Posts Lengths
Recommended
Effective
Mating Posts Lengths
Receptacle Type
Receptacle Type
Minimum
Maximum
Minimum
.169 [4.29]
.169 [4.29]
Maximum
.259 [6.58]
.259 [6.58]
AMPMODU Mod II Horizontal Board Mount
Receptacle, Single and Double Row, Short
Point-of-Contact—pages 169, 170, 172, 173
Short Point Housing with Contacts—
pages 222-224
AMPMODU MTE Unloaded Housing with
Short Point Contacts—pages 222, 229, 231, 233
.230 [5.84]
.280 [7.11]
AMPMODU Mod II Vertical Board Mount
Receptacle, Single Row, Standard Profile,
Top Entry—page 175
.183 [4.65]
.183 [4.65]
.330 [8.38]
.330 [8.38]
AMPMODU MTE
IDC Assemblies
AMPMODU MT IDC Assembly with
Standard Pressure Contacts—page 256
AMPMODU MT IDC Assembly with
High Pressure Contacts—page 257
Locking Clip Housing with
Contacts—pages 207-209
Locking Clip Contact without
Housing—page 207
.200 [5.08]
.222 [5.64]
.200 [5.08]
.273 [6.93]
.200 [5.08]
.267 [6.78]
.282 [7.16]
.210 [5.33]
.250 [6.35]
.273 [6.93]
.273 [6.93]
.350 [8.89]
.277 [7.04]
.323 [8.20]
.323 [8.20]
.323 [8.20]
AMPMODU Mod II Vertical
Board Mount Receptacle, Standard
Profile, Double Row, Top Entry,
100 x .100 mt.—page 176
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Profile, Single Row, Top Entry, Single Tine—
page 178
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Profile, Single Row, Bottom Entry—
page 177
AMPMODU Mod IV Vertical
Board Mount Receptacle, Low
Profile, Double Row, Top Entry—
pages 179, 180
.183 [4.65]
.280 [7.11]
.255 [6.48]
5
Flexible Flat Conductor Cable
Receptacle with Round Wire
Crimp High Pressure Contact—
Catalog 82007
Single Row
Double Row
Single Row
Double Row
Single Row
Double Row
Single Row
Double Row
*
Flexible Flat Conductor Cable
Receptacle with Multiple Wire
Crimp High Pressure Contact—
Catalog 82007
.183 [4.65]
.183 [4.65]
.255 [6.48]
.225 [5.72]
.267 [6.78]
.323 [8.20]
.323 [8.20]
AMPMODU Surface-Mount Receptacle, Top Entry
Vertical Board Mount,
Single Row, Dual Entry—page 187, 188 Bottom Entry
*
Flexible Flat Conductor Cable
Receptacle with Round Wire
Crimp Standard Pressure
Contact—Catalog 82007
.204 [5.18]
.183 [4.65]
.204 [5.18]
.183 [4.65]
*
*
*
*
AMPMODU Mod IV Vertical
Top Entry
Board Mount Receptacle, Low
.282 [7.16]
.220 [5.59]
.235 [5.97]
.323 [8.20]
.323 [8.20]
.323 [8.20]
Profile, Double Row, Dual Entry—
Bottom Entry
page 182
Flexible Flat Conductor Cable
Receptacle with Multiple Crimp
Standard Pressure Contact—
Catalog 82007
AMPMODU Surface-Mount Receptacle, Top Entry
Vertical Board Mount, Double Row,
Dual Entry—page 189-192
Bottom Entry .204 [5.18]
*
AMPMODU .600 [15.24] Mod IV
*Maximum post length is determined by customer’s application; (i.e., available
space beyond rear of horizontal receptacle assembly, or above bottom entry ver-
tical receptacle assembly or below vertical receptacle assemblies used in pass
through applications).
Housing with Standard Pressure Contacts—
pages 211-220
.210 [5.33]
.205 [5.21]
.185 [4.70]
.283 [7.19]
AMPMODU .600 [15.24] Mod IV
Housing with Intermediate Pressure Contacts—
pages 211-220
AMPMODU .600 [15.24] Mod IV
Housing with High Pressure Contacts—
pages 211-220
.283 [7.19]
.283 [7.19]
AMPMODU Mod IV Vertical
Top Entry
.183 [4.65]
.204 [5.18]
*
*
Board Mount Receptacle, Low
Profile, Single Row, Dual Entry—
Bottom Entry
page 181
90
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Parallel Stacking Guide for Board-to-Board Applications
See
Dimension
Between
Product Family
Headers
(See Note 1.)
Single-Row
(Page Ref.)
Double-Row
(Page Ref.)
Product Family
Receptacles
Single-Row
(Page Ref.)
Double-Row
(Page Ref.)
Figure
Below PC Boards
177, 181,
187, 188
182-184,
189-192
Bandolier Posts
163
102**
NA
NA
104**
Dual Entry, Mod IV
Dual Entry, Mod IV
Dual Entry, Mod IV
Top Entry, Mod IV
Top Entry, Mod IV
Top Entry, Mod IV
.060 [1.52]
Breakaway**
(Unshrouded)
177, 181,
187, 188
182-184,
189-192
1
2
.090 [2.29]
.153 [3.89]
.265 [6.73]
Surface Mount**
Breakaway (Unshrouded)
177, 181,
187, 188
182-184,
189-192
110
178, 181
187, 188
179, 180,
182-184, 189-192
Bandolier Posts
163
137**
Breakaway**
(Unshrouded)
178, 181
187, 188
179, 180,
182-184, 189-192
102**
NA
104**
.355 [9.02]
.385 [9.78]
.418 [1.06]
.430 [10.92]
.440 [11.18]
.528 [13.41]
.547 [13.89]
.550 [13.97]
.748 [19.00]
.768 [19.51]
Various
Low Profile Shrouded
135, 137**
110
NA
187, 188
175
179,180
189-192
176
Surface Mount**
Breakaway (Unshrouded)
Surface Mount**, Mod IV,
Top Entry
3
109
Breakaway**
(Unshrouded)
2*
4*
102**
115, 116
NA
104**
Top Entry, Mod II
Shrouded, Mod II
117, 119
156 (Hood)
160
Top Entry, Mod II or Mod IV
175, 178
NA
176, 179, 180
157
Stacking Shroud
(See Note 2.)
Inner Board Receptacle
(See Note 2.)
Stacking Shroud
(See Note 2.)
Outer Board Receptacle
(See Note 2.)
NA
NA
158
Two-Piece Header
Connector System
Two-Piece Receptacle**
Connector System
4
NA
198, 199
156 (Hood)
161
NA
196**
Stacking Shroud
(See Note 2.)
Inner Board Receptacle
(See Note 2.)
NA
NA
157
Stacking Shroud
(See Note 2.)
Outer Board Receptacle
(See Note 2.)
NA
NA
158
Mod II/IV Receptacles,
Top/Bottom Entry
Stacking Unshrouded
112
113
Various
Various
**High temperature version available, see page ref. listed.
Notes: 1. Headers listed are standard thru-hole versions. Many headers are available with retention feature and ACTION PIN posts. See product
Notes: 1. specification pages in individual sections for option availability.
Notes: 2. These headers and receptacles are Related Board-to-Board products. They are not part of the AMPMODU .025 [0.64] Square Product Family.
5
Board-to-Board
Stacking Heights
(By Receptacle/Header
Combination)
Receptacle Assembly
Receptacle Assembly
Receptacle Assembly
.265
[6.73]
.265
[6.73]
.265*
[6.73]
.550*
[13.97]
.355
[9.02]
.418
[10.62]
.090
[2.29]
.090
[2.29]
.153
[3.89]
Header
Header
Header
Figure 1
Double-Row, Mod IV,
Figure 2
Double-Row, Mod IV,
Figure 3
Double-Row, Mod IV,
Figure 4
Double-Row,Two-Piece
Bottom Entry, Breakaway Header
Top Entry, Breakaway Header
Surface-Mount,Top Entry,
Receptacle and Surface-Mount
Breakaway Header
Receptacle and Two-Piece
Shrouded Header
*Mod II Receptacle Height
is .340 [8.64] for a total
stack height of .430 [10.92]
*Mod II Shrouded Header Height
is .440 [11.18] for a total
stack height of .440 [11.18]
91
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Standard Headers—Unshrouded
Product Facts
I Variety of popular sizes
available
I Substantial time/labor
savings—install all posts
at one time
I Vertical and right-angle
versions available in
single- and double-row
configurations
I Triple-row version available
in vertical configuration
with .230 [5.84] mating
length
I Copper alloy posts
I Choice of select gold or
tin plated posts
I Mating length for single and
double row is .318 [8.08]
(.278 [7.06] effective mat-
ing length-see page 90)
I Flame retardant, black
thermoplastic housings;
94V-0 rated
I Recognized under the
Component Program of
Underwriters
Performance
Characteristics
Laboratories Inc.,
R
File No. E28476
Electrical
Insulation Resistance — 5,000
megohms minimum initial
Dielectric Withstanding Voltage —
750 V rms at sea level
I Certified by Canadian
Standards
R
Association,
File No. LR 7189
5
Environmental
Operating Temperature —
-65°C to +105°C (black thermoplastic
housings)
Current — 3 amperes maximum
per contact (dependent upon mating
connector)
92
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline
.200
[5.08]
(Contact Area)
.025 [0.64] Square
Straight Post
Ref.
A
.100
[2.54]
Typ.
.318
[8.08]
.090
[2.29]
.046/.038
[1.17/0.97]
.125
[3.18]
.042
[1.07]
Typ.
.050
[1.27]
B
Max. Typ.
Material and Finish
B
.035 .003
[0.89 0.08]
.100*
[2.54]
Dia.Typ.
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated as fol-
lows:
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Dimensions
Post Plating/Part Nos.
Plating B — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
No. of
Pos.
A
B
—
Plating A
87220-1
87220-2
Plating B
87224-1
1
.084 [2.13]
.184 [4.67]
2
.100 [2.54]
87224-2
Tin/Nickel — Plating option available;
minimum order quantities may apply.
Consult TE.
3
.284 [7.21]
.384 [9.75]
.200 [5.08]
.300 [7.62]
87220-3
87224-3
4
87220-4
87224-4
5
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.084 [78.33]
3.184 [80.87]
3.284 [83.41]
3.384 [85.95]
3.484 [88.49]
3.584 [91.03]
3.684 [93.57]
3.784 [96.11]
3.884 [98.65]
3.984 [101.19]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
87220-5
87224-5
6
87220-6
87224-6
7
87220-7
87224-7
Related Product Data
8
87220-8
87224-8
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
9
87220-9
87224-9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1-87220-0
1-87220-1
1-87220-2
1-87220-3
1-87220-4
1-87220-5
1-87220-6
1-87220-7
1-87220-8
1-87220-9
2-87220-0
2-87220-1
2-87220-2
2-87220-3
2-87220-4
2-87220-5
2-87220-6
2-87220-7
2-87220-8
2-87220-9
3-87220-0
3-87220-1
3-87220-2
3-87220-3
3-87220-4
3-87220-5
3-87220-6
3-87220-7
3-87220-8
3-87220-9
4-87220-0
1-87224-0
1-87224-1
1-87224-2
1-87224-3
1-87224-4
1-87224-5
1-87224-6
1-87224-7
1-87224-8
1-87224-9
2-87224-0
2-87224-1
2-87224-2
2-87224-3
2-87224-4
2-87224-5
2-87224-6
2-87224-7
2-87224-8
2-87224-9
3-87224-0
3-87224-1
3-87224-2
3-87224-3
3-87224-4
3-87224-5
3-87224-6
3-87224-7
3-87224-8
3-87224-9
4-87224-0
Technical Documents — page 276
5
See mating connector for applicable
product and application specifications.
Note: All part numbers are RoHS
compliant.
93
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline (Continued)
.139
[3.53]
Ref.
.025 [0.64] Square
Right-Angle Post
.025
[0.64]
Typ.
Material and Finish
.040
[1.02]
Ref.
A
B
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated as follows:
.200 [5.08]
Contact Area
.042
[1.07]
Typ.
.069
[1.75]
Typ.
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
.069
[1.75]
.025
[0.64]
Plating B — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Tin/Nickel — Plating option available;
minimum order quantities may apply.
Consult TE.
.138
[3.51]
Ref.
.100
[2.54]
.110
[2.79]
Ref.
.157
[3.99]
.318
[8.08]
Ref.
.025 .001
[0.63 0.03]
.025 .002
[0.63 0.05]
Typ.
Typ.
Related Product Data
B
.100*
[2.54]
Typ.
Mateable Connectors — Refer
to the Mating Post Selection Guide —
page 90
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Technical Documents — page 276
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
See mating connector for applicable
product and application specifications.
5
Dimensions
Post Plating/Part Nos.
No. of
Pos.
A
B
Plating A
87232-1
87232-2
Plating B
87233-1
1
2
.084 [2.13]
—
.184 [4.67]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
87233-2
3
.284 [7.21]
.384 [9.75]
87232-3
87233-3
4
87232-4
87233-4
5
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
87232-5
87233-5
6
87232-6
87233-6
7
87232-7
87233-7
8
87232-8
87233-8
9
87232-9
87233-9
10
11
12
13
14
15
16
17
18
19
20
1-87232-0
1-87232-1
1-87232-2
1-87232-3
1-87232-4
1-87232-5
1-87232-6
1-87232-7
1-87232-8
1-87232-9
2-87232-0
1-87233-0
1-87233-1
1-87233-2
1-87233-3
1-87233-4
1-87233-5
1-87233-6
1-87233-7
1-87233-8
1-87233-9
2-87233-0
Note: All part numbers are RoHS compliant.
94
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Headers—Unshrouded, Single Row, .100 [2.54] Centerline (Continued)
Dimensions
Post Plating/Part Nos.
Plating A
No. of
Pos.
A
B
Plating B
2-87233-1
2-87233-2
2-87233-3
2-87233-4
2-87233-5
2-87233-6
2-87233-7
2-87233-8
2-87233-9
3-87233-0
3-87233-1
3-87233-2
3-87233-3
3-87233-4
3-87233-5
3-87233-6
3-87233-7
3-87233-8
3-87233-9
4-87233-0
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.084 [78.33]
3.184 [80.87]
3.284 [83.41]
3.385 [85.95]
3.484 [88.49]
3.584 [91.03]
3.684 [93.57]
3.784 [96.11]
3.884 [98.65]
3.984 [101.19]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
2-87232-1
2-87232-2
2-87232-3
2-87232-4
2-87232-5
2-87232-6
2-87232-7
2-87232-8
2-87232-9
3-87232-0
3-87232-1
3-87232-2
3-87232-3
3-87232-4
3-87232-5
3-87232-6
3-87232-7
3-87232-8
3-87232-9
4-87232-0
5
Note: All part numbers are RoHS compliant.
95
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post
.100
[2.54]
.200
Ref.
[5.08]
(Contact Area)
A
.100
[2.54]
Typ.
.318
[8.08]
.090
[2.29]
.046/.038
[1.17/0.97]
.125
[3.18]
.042
[1.07]
Typ.
.050
[1.27]
B
Material and Finish
Max. Typ.
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
B
.100*
[2.54]
Plating B — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Tin/Nickel — Plating option available;
minimum order quantities may apply.
Consult TE.
.100*
[2.54]
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
5
Accessories
Barrier Insert — page 204
Dimensions
Post Plating/Part Nos.
No. of
Pos.
A
B
—
Plating A
Plating B
87227-1
2
.084 [2.13]
1-87215-0
1-87215-1
1-87215-2
87215-1
4
.184 [4.67]
.284 [7.21]
.384 [9.75]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
87227-2
Technical Documents — page 276
6
87227-3
8
87227-4
See mating connector for applicable
product and application specifications.
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
87215-2
87227-5
87215-3
87227-6
87215-4
87227-7
87215-5
87227-8
87215-6
87227-9
87215-7
1-87227-0
1-87227-1
1-87227-2
1-87227-3
1-87227-4
1-87227-5
1-87227-6
1-87227-7
1-87227-8
1-87227-9
2-87227-0
1-87215-3
87215-8
87215-9
1-87215-4
1-87215-5
1-87215-6
1-87215-7
1-87215-8
1-87215-9
2-87215-0
Note: All part numbers are RoHS compliant.
96
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
Post Plating/Part Nos.
Plating A
No. of
Pos.
A
B
Plating B
2-87227-1
2-87227-2
2-87227-3
2-87227-4
2-87227-5
2-87227-6
2-87227-7
2-87227-8
2-87227-9
3-87227-0
3-87227-1
3-87227-2
3-87227-3
3-87227-4
3-87227-5
3-87227-6
3-87227-7
3-87227-8
3-87227-9
4-87227-0
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.084 [78.33]
3.184 [80.87]
3.284 [83.41]
3.384 [85.95]
3.484 [88.49]
3.584 [91.03]
3.684 [93.57]
3.784 [96.11]
3.884 [98.65]
3.984 [101.19]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
2-87215-1
2-87215-2
2-87215-3
2-87215-4
2-87215-5
2-87215-6
2-87215-7
2-87215-8
2-87215-9
3-87215-0
3-87215-1
3-87215-2
3-87215-3
3-87215-4
3-87215-5
3-87215-6
3-87215-7
3-87215-8
3-87215-9
4-87215-0
5
Note: All part numbers are RoHS compliant.
97
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
.200
[5.08]
(Contact Area)
.025 [0.64] Square
Right-Angle Post
Ref.
.289
[7.34]
A
.042
[1.07]
Typ.
.042
[1.07]
.100
[2.54]
.110
[2.79]
.318
[8.08]
.069
.100
[2.54]
Typ.
[1.75]
.157
[3.99]
.100
[2.54]
Material and Finish
B
B
Housing — Black thermoplastic,
94V-0 rated
Posts — Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
.100*
[2.54]
Plating B — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Tin/Nickel — Plating option available;
minimum order quantities may apply.
Consult TE.
.035 .003
[0.89 0.08]
.100*
[2.54]
Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Technical Documents — page 276
5
See mating connector for applicable
product and application specifications.
Dimensions
Post Plating/Part Nos.
No. of
Pos.
A
B
—
Plating A
1-86479-3
1-86479-4
1-86479-5
1-86479-6
86479-3
Plating B
87230-1
2
.084 [2.13]
.184 [4.67]
.284 [7.21]
.384 [9.75]
4
.100 [2.54]
.200 [5.08]
.300 [7.62]
87230-2
6
87230-3
8
87230-4
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
87230-5
86479-4
87230-6
86479-5
87230-7
86479-2
87230-8
86479-6
87230-9
86479-1
1-87230-0
1-87230-1
1-87230-2
1-87230-3
1-87230-4
1-87230-5
1-87230-6
1-87230-7
1-87230-8
1-87230-9
2-87230-0
1-86479-7
86479-7
1-86479-0
1-86479-8
1-86479-9
2-86479-0
2-86479-1
2-86479-2
2-86479-3
2-86479-4
Note: All part numbers are RoHS compliant.
98
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
Post Plating/Part Nos.
Plating A
No. of
Pos.
A
B
Plating B
2-87230-1
2-87230-2
2-87230-3
2-87230-4
2-87230-5
2-87230-6
2-87230-7
2-87230-8
2-87230-9
3-87230-0
3-87230-1
3-87230-2
3-87230-3
3-87230-4
3-87230-5
3-87230-6
3-87230-7
3-87230-8
3-87230-9
4-87230-0
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.084 [78.33]
3.184 [80.87]
3.284 [83.41]
3.384 [85.95]
3.484 [88.49]
3.584 [91.03]
3.684 [93.57]
3.784 [96.11]
3.884 [98.65]
3.984 [101.19]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
2-86479-5
2-86479-6
2-86479-7
2-86479-8
2-86479-9
3-86479-0
3-86479-1
3-86479-2
3-86479-3
3-86479-4
3-86479-5
3-86479-6
3-86479-7
3-86479-8
3-86479-9
4-86479-0
4-86479-1
4-86479-2
4-86479-3
4-86479-4
5
Note: All part numbers are RoHS compliant.
99
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Headers—Unshrouded, Triple-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Post
A
.338
[8.59]
.100
[2.54]
Typ.
B
.069
[1.75]
Typ.
.042
[1.07]
Typ.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
.120
.230
[5.84]
Posts — Phosphor bronze, duplex
plated 000030 [0.00076] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder area,
with entire post underplated .000050
[0.00127] nickel
[3.05]
.185
[4.70]
(Contact Area)
Ref.
.100
[2.54]
Typ.
.120
[3.05]
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.100*
[2.54]
B
.100*
[2.54]
.035 .003
[0.89 0.08]
Dia. Typ.
.100*
[2.54]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
5
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
No. of
Pos.
Part Nos.
A
B
9
12
15
18
21
24
27
30
33
42
45
60
69
72
96
120
.284 [7.21]
.384 [9.75]
.200 [5.08]
.300 [7.62]
5-103817-1
5-103817-2
5-103817-3
5-103817-4
5-103817-5
5-103817-6
5-103817-7
5-103817-8
5-103817-9
6-103817-2
6-103817-3
6-103817-8
7-103817-1
7-103817-2
8-103817-0
8-103817-8
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.384 [35.15]
1.484 [37.69]
1.984 [50.39]
2.284 [58.01]
2.384 [60.55]
3.184 [80.87]
3.984 [101.19]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.300 [33.02]
1.400 [35.56]
1.900 [48.26]
2.200 [55.88]
2.300 [58.42]
3.100 [78.74]
3.900 [99.06]
Note: All part numbers are RoHS compliant.
100
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Breakaway and Retention Headers—Unshrouded
Product Facts
I Design and inventory
versatility—headers can be
broken into any size needed
I Variety of popular sizes
available
I Substantial time/labor
savings can install all posts
at one time
I Vertical and right-angle
versions available in
single- and double-row
configurations
I Phosphor bronze posts
I Choice of gold duplex or
tin plated posts
I Post lengths include .230
[5.84] and .318 [8.08] for
connector mating
I Board retention feature
available
I Black, glass-filled
thermoplastic housings;
high temperature
compatible
Performance
I Recognized under the
Component Program of
Underwriters
Characteristics
Electrical
Insulation Resistance — 5,000
megohms minimum initial
Dielectric Withstanding Voltage —
750 V rms at sea level
Laboratories Inc.,
R
File No. E28476
I Certified by Canadian
Standards
5
R
Association,
File No. LR 7189
Environmental
Operating Temperature —
-65°C to +105°C (black thermoplastic
housings)
Current — 3 amperes maximum
per contact (dependent upon mating
receptacle)
101
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Posts
Headers with Solder Tails
A
B
E Ref.
(Contact Area)
.025
[0.64]
Typ.
D
.090
[2.29]
C
.045
[1.14]
Typ.
Material and Finish
B
.035 .003
[0.89 0.08]
(Plated)
Recommended Hole Size
Before Plating
.100*
[2.54]
Dia. Typ.
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
tail, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
tail, with entire post underplated .000050
[0.00127] nickel
.045 .001
[1.14 0.02]
Dia. Typ.
.090 .002
[2.29 0.05]
.030 .002
[0.76 0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
* .003 [ 0.08] tolerances not to accumulate within one connector pattern.
Headers with Board Retention Tails
A
B
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel
E Ref.
(Contact Area)
.025
[0.64]
Typ.
D
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
.090
[2.29]
C
(see
note 3)
.045
[1.14]
Typ.
B
Related Product Data
.100*
[2.54]
5
.040 .003
[1.02 0.08]
Dia. Typ.
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
(Plated)
.150 .002
[3.81 0.05]
Recommended Hole Size
Before Plating
.045 .001
[1.14 0.02]
Dia. Typ.
.030 .002
[0.76 0.05]
Technical Documents — page 276
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
* .003 [ 0.08] tolerances not to accumulate within one connector pattern.
See mating connector for applicable
product and application specifications.
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Dimensions
Header
Style
No. of
Pos.
A
B
Post Plating/Part Nos.
Post Plating/Part Nos.
Post Plating/Part Nos.
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
With
1
40
3
.084 [2.13]
3.984 [101.19]
.284 [7.21]
—
5-146285-1 5-146284-1 5-146282-1
5-146281-1
9-146281-0
5-146293-3
9-146293-0
5-146280-1
5-146278-1
9-146278-0
5-146290-3
9-146290-0
5-146277-1
5-146276-1
5-146274-1
Solder Tails
(See Notes
1 and 2.)
3.900 [99.06] 9-146285-0 9-146284-0 9-146282-0
.200 [5.08] 5-146297-3 5-146296-3 5-146294-3
3.900 [99.06] 9-146297-0 9-146296-0 9-146294-0
9-146280-0
5-146292-3
9-146292-0
9-146277-0
5-146289-3
9-146289-0
9-146276-0
5-146288-3
9-146288-0
9-146274-0
5-146286-3
9-146286-0
With Board
Retention Tails
(See Notes
2 and 3.)
40
3.984 [101.19]
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails). When ordering, add the prefix and/or suffix (dash)
numbers plus 5- -0 to the base part number that corresponds with the desired size. For example, the complete part number for an 8-position header with solder tails (C dimension
.090 [2.29], post plating A) would be 5-146285-8. The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05], post plating B) would
be 7-146292-6. This part numbering system applies only to this page.
3. For C dimensions .120 [3.05] and .125 [3.18], board retention using kinked tails are for headers 6 positions and smaller; headers 7 positions and larger use swaged tails.
Headers with a C dimension of .090 [2.29] have swaged tails for all sizes.
Note: All part numbers are RoHS compliant.
102
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Single-Row,
.100 [2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Posts
Headers with Solder Tails
A
B
D
.100
Typ.
.090
[2.54]
[2.29]
.138
[3.51]
C
Material and Finish
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
Posts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on con-
tact area, .000100-.000200 [0.00254-
0.00508] matte tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
E Ref.
(Contact
Area)
.042
[1.07]
(2 Plc.)
.045
[1.14]
Typ.
.140
[3.56]
.100*
[2.54]
.035 .003
[0.89 0.08]
Dia. Typ.
(Plated)
.090 .002
[2.29 0.05]
Recommended Hole Size
Before Plating
.045 .001
[1.14 0.02]
Dia. Typ.
.030 .002
[0.76 0.05]
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
* .003 [ 0.08] tolerances not to accumulate within one connector pattern.
Headers with Board Retention Tails
A
B
Related Product Data
D
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
.090
[2.29]
.100
[2.54]
Typ.
.138
[3.51]
Technical Documents — page 276
C
See mating connector for applicable
product and application specifications.
E Ref.
(Contact
Area)
.042
[1.07]
(2 Plc.)
5
.045
[1.14]
Typ.
.140
[3.56]
.100*
[2.54]
.040 .003
[1.02 0.08]
Dia. Typ.
(Plated)
Recommended Hole Size
Before Plating
.150 .002
[3.81 0.05]
.045 .001
[1.14 0.02]
Dia. Typ.
.030 .002
[0.76 0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
* .003 [ 0.08] tolerances not to accumulate within one connector pattern.
Board Retention
using Swaged Tails
(All Header Sizes)
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
C = .110 [2.79]
D = .318 [8.08]
E = .200 [5.08]
Dimensions
Header
Style
No. of
Pos.
A
B
Part Nos.
Part Nos.
With
1
40
3
—
5-146304-1
5-146305-1
.084 [2.13]
Solder Tails
(See Notes
1 and 2.)
3.984 [101.19]
3.900 [99.06]
—
9-146304-0
5-146306-3
9-146306-0
9-146305-0
5-146307-3
9-146307-0
.084 [2.13]
With Board
Retention Tails
(See Note 2.)
3.984 [101.19]
3.900 [99.06]
40
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails).
When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the number
of positions. For example, the complete part number for an 8-position header with solder tails (C dimension .120 [3.05)] would be
5-146304-8.The complete part number for a 26-position header with board retention tails (C dimension .120 [3.05]) would be
7-146306-6.This part numbering system applies only to this page.
Note: All part numbers are RoHS compliant.
103
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Posts
Headers with Solder Tails
.192
[4.88]
A
B
E Ref.
(Contact Area)
.025
[0.64]
Typ.
D
.090
[2.29]
C
Material and Finish
.045
[1.14]
.100
[2.54]
of Hole Pattern)
Ref.
.100*
[2.54]
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
.100
[2.54]
C
(
L
Posts — Phosphor bronze, plated as
.110
[2.79]
of Stencil Pattern)
.035 .003
[0.89 0.08]
(Plated)
Recommended Hole Size
Before Plating
.045 .001
follows:
C
(
L
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder tail, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder tail, with entire post
underplated .000050 [0.00127] nickel
Dia. Typ.
.030 .002
[0.76 0.05]
.090 .002
[2.29 0.05]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
Dia. Typ.
[1.14 0.02]
* .003 [ 0.08] tolerances not to accumulate within one connector pattern.
Headers with Board Retention Tails
A
Plating C — .000100-.000200
[0.00254-0.00508] tin over
.000050 [0.00127] nickel
B
E Ref.
(Contact Area)
.025
[0.64]
Typ.
D
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
.090
[2.29]
C
5
.100
[2.54]
of Hole Pattern)
.075
[1.91]
.192
[4.88]
Related Product Data
Ref.
.100*
[2.54]
C
(
L
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
.170
[4.32]
of Stencil Pattern)
.040 .003
[1.02 0.08]
(Plated)
C
(
L
Dia. Typ.
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.150 .002
[3.81 0.05]
.030 .002
[0.76 0.05]
Recommended Hole Size
Before Plating
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
* .003 [ 0.08] tolerances not to accumulate within one connector pattern.
.045 .001
[1.14 0.02]
Dia. Typ.
C = .090 [2.29]
D = .230 [5.84]
E = .185 [4.70]
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
C = .125 [3.18]
D = .318 [8.08]
E = .200 [5.08]
Dimensions
Header
Style
No. of
Pos.
A
B
Post Plating/Part Nos.
Post Plating/Part Nos.
Post Plating/Part Nos.
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
With
2
80
2
.084 [2.13]
—
5-146261-1 5-146260-1 5-146258-1 5-146257-1 5-146256-1 5-146254-1 5-146253-1 5-146252-1 5-146250-1
Solder Tails
(See Notes
1 and 2.)
3.984 [101.19] 3.900 [99.06] 9-146261-0 9-146260-0 9-146258-0 9-146257-0 9-146256-0 9-146254-0 9-146253-0 9-146252-0 9-146250-0
.084 [2.13] 5-146273-1 5-146272-1 5-146270-1 5-146269-1 5-146268-1 5-146266-1 5-146265-1 5-146264-1 5-146262-1
3.984 [101.19] 3.900 [99.06] 9-146273-0 9-146272-0 9-146270-0 9-146269-0 9-146268-0 9-146266-0 9-146265-0 9-146264-0 9-146262-0
—
With Board
Retention Tails
(See Note 2.)
80
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the
number of positions per row. For example, the complete part number for a 16-position header with solder tails (C dimension .090 [2.29], post plating A) would be 5-146261-8.
The complete part number for a 40-position header with board retention tails (C dimension .120 [3.05], post plating B) would be 7-146268-0. This part numbering system
applies only to this page.
Note: All part numbers are RoHS compliant.
104
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Breakaway Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Posts
Headers with Solder Tails
A
.042
B
[1.07]
(2 Plc.)
D
.100
[2.54]
Typ.
.090
[2.29]
.238
[6.05]
.100
[2.54]
E Ref.
(Contact
Area)
C
Material and Finish
.045
[1.14]
Ref.
.140
[3.56]
Housing — Black thermoplastic, 94V-0
rated, high temperature compatible
.100*
[2.54]
.100
[2.54]
Posts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder tail,
with entire post underplated .000050
[0.00127] nickel
.110
[2.79]
of Stencil Pattern)
.100
[2.54]
C
(
L
.035 .003
[0.89 0.08]
(Plated)
Recommended Hole Size
Before Plating
.045 .001
C
(
of Hole Pattern)
Dia. Typ.
L
.090 .002
[2.29 0.05]
.030 .002
[0.76 0.05]
Dia. Typ.
Performance Characteristics
(Board Retention Tails)
Insertion Force — 12 lb [53.4N] max.
Retention Force — .25 lb [1.11N] min.
[1.14 0.02]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
* .003 [ 0.08] tolerances not to accumulate within one connector pattern.
Headers with Board Retention Tails
A
Related Product Data
.042
[1.07]
(2 Plc.)
B
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
D
.090
[2.29]
.100
[2.54]
.238
[6.05]
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
E Ref.
(Contact
Area)
C
5
.075
[1.91]
Typ.
.100*
[2.54]
.140
[3.56]
.170
[4.32]
.100
[2.54]
( C of Stencil Pattern)
.100
[2.54]
L
.040 .003
[1.02 0.08]
Dia. Typ.
C
(
of
L
Hole
(Plated)
Pattern)
.150 .002
[3.81 0.05]
Recommended Hole Size
Before Plating
.030 .002
[0.76 0.05]
.045 .001
Dia. Typ.
[1.14 0.02]
Recommended PC Board Mounting Pattern
(for .062 [1.57] thick PC board; .008 [.203] thick stencil)
* .003 [ 0.08] tolerances not to accumulate within one connector pattern.
C = .120 [3.05]
D = .230 [5.84]
E = .185 [4.70]
C = .110 [2.79]
Dimensions
D = .318 [8.08]
Header
Style
No. of
Pos.
E = .200 [5.08]
Part Nos.
A
B
Board Retention
using Swaged Tails
(All Header Sizes)
Part Nos.
With
2
80
2
.084 [2.13]
3.984 [101.19]
.084 [2.13]
—
5-146308-1
5-146309-1
9-146309-0
5-146311-1
9-146311-0
Solder Tails
(See Notes
1 and 2.)
3.900 [99.06]
—
9-146308-0
5-146310-1
9-146310-0
With Board
Retention Tails
(See Note 2.)
80
3.984 [101.19]
3.900 [99.06]
Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown).
Notes: 2. Headers are also available in sizes 4 thru 78 positions. When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to
the base part number that corresponds with the number of positions per row. For example, the complete part number for a 16-
position header with solder tails (C dimension .120 [3.05)] would be 5-146308-8.The complete part number for a 40-position header
with board retention tails (C dimension .120 [3.05]) would be 7-146310-0.This part numbering system applies only to this page.
Note: All part numbers are RoHS compliant.
105
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMPMODU Reeled Breakaway Headers
Features of Breakaway
Headers
I Design and inventory
versatility — headers can
easily be made into a variety
of sizes
I High Temperature
Compatible
I Reduced part number base
I Reduced inventory burden
Applications
I Desktops & workstations
I Set-top boxes
I Televisions
I Automotive instrument
panels & radios
I Medical and test equipment
Benefits
I Off the shelf availability
I Various header length
capability using the same
reel
I Reduction of inventory costs
I Economy version of the
standard breakaway headers
TE now offers AMPMODU
reeled breakaway headers,
which are used for board-
to-board interconnections,
on a continuous reel. The
reeled breakaway headers
are an economy version of
the standard breakaway
headers, and continue to
provide the same high
quality standards that
Reeled breakaway headers
can be purchased in single
and double rows with tin,
5 Au, 15 Au, and 30 Au
duplex plating. The lower
applied cost also offers
.230" and .318" mating
lengths. (See standard
breakaway-to-reeled header
conversion chart for vertical
headers on the reverse side
of this sheet)
5
TE is known for in the
connector industry.
Potential industries include:
computer peripherals,
telecommunications
equipment, consumer,
automotive, medical and
test equipment.
Reeled breakaway headers
provide the flexibility to cut
the headers to many
different lengths, while only
having to stock one part
number. As a result, the
amount of part numbers that
need to be purchased and
stored can be greatly
Tooling available from:
Robo-Pak, Inc.
814 Lakeshore Drive
East Bethel, MN 55902
reduced.
A pin retention and pin
removal tooling option is
also available in addition to
cutting.
106
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
AMPMODU Reeled Breakaway Headers (Continued)
Single Row
3.900
[99.06]
.092
[2.34]
.046 .003
[1.17 0.08]
.025 .001
[0.64 0.03]
Typ.
.100
[2.54]
.230(1)
[5.84]
.185 [4.70]
(Contact Area)
.100 .003
[2.54 0.08]
.025 .002
[0.64 0.05]
.110 .015(1)
[2.79 0.38]
Double Row
3.900
[99.06]
.192
[4.88]
.046 .003
[1.17 0.08]
.100
[2.54]
.025 .001
[0.64 0.03]
Typ.
.100
[2.54]
.185 [4.70]
(Contact Area)
.230(1)
[5.84]
5
.100 .003
[2.54 0.08]
.025 .002
[0.64 0.05]
.110 .015(1)
[2.79 0.38]
(1) See table for other mate and tail lengths.
Standard Breakaway-to-Reeled Header Conversion Chart (Vertical)
Double Row Headers
Single Row Headers
Existing
TE P/N
Make From
Reeled P/N
Existing
TE P/N
Make From
Reeled P/N
Existing
TE P/N
Make From
Reeled P/N
Existing
TE P/N
Make From
Reeled P/N
Plating
Options
Mate: .318
Tail: .125
103322
Mate: .318
Tail: .115
Mate: .230
Tail: .120
103328
Mate: .230
Tail: .110
Mate: .318
Tail: .125
103321
Mate: .318
Tail: .115
Mate: .230
Tail: .120
103327
Mate: .230
Tail: .110
Tin
5-146853-1
5-146861-1
5-146871-1
5-146851-1
5-146859-1
5-146869-1
5-146852-1
5-146860-1
5-146870-1
5-146850-1
5-146858-1
5-146868-1
146250
102973
146254
103186
146274
102972
146278
103185
15 Au Duplex
30 Au Duplex
146252
102977
146256
103240
146276
102976
146280
103239
146253
146257
146277
146281
Note: Reeled Headers are a functional substitute for standard breakaways, however there are visual differences (i.e. housing appearance and bow due to reeling requirement).
Note: All part numbers are RoHS compliant.
107
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Breakaway Surface Mount Headers, .100 x .100 [2.54 x 2.54] Centerline
Product Facts
I Surface Mount Leads
I Contact Material:
phosphor bronze
I High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vapor-
phase reflow
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
R
I Certified by Canadian
Standards
R
Association,
File No. LR 7189
I Choice of gold duplex or tin
plated posts
I Posts coplanar within .006
[0.15]
I Tape and reel packaging
available in addition to
single tube packaging.
Contact TE.
I Pick-and-place cap avail-
able for vacuum placement.
Contact TE.
An extension of the
in single- and double-row
vertical configurations with
Current packaging is in a
single tube but tape and
AMPMODU Breakaway
Header product family are
the surface mount, vertical
breakaway headers. The
AMPMODU Surface Mount
breakaway headers
mating lengths of .230 [5.84] reel is available for
and .320 [8.13]. Posts are
offered with a choice of
either .000030 [.0007] gold
duplex or tin plating.
automatic pick-and-place.
We also can provide a pick-
and-place cap for vacuum
placement if required.
5
(Unshrouded) are available
108
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Breakaway Surface Mount Headers—Unshrouded
Single-Row, .100 [2.54] Centerline
A
.025 [0.64] Square
Straight Post
B
.100
[2.54]
Typ.
.092
[2.34]
D Ref.
(Contact Area)
Material and Finish
C
.090
[2.29]
Housing — Black thermoplastic, 94V-0
rated
.025
[0.63]
Posts — Phosphor bronze, plated as
follows:
.042
[1.07]
Typ.
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
.100
[2.54]
.050
[1.27]
Typ.
.050 .003
[1.27 0.08]
.192
[4.88]
Plating B — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel entire post
.105
[2.67]
Related Product Data
.245
[6.22]
Mateable Receptacle —
Refer to Mating Post Selection
Guide — page 90
.140 .003
[3.56 0.08]
Recommended Etched Circuit Layout
(Using .008 [0.20] thick stencil)
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
5
C = .230 [5.84]
C = .320 [8.13]
D = .200 [5.08]
D = .185 [4.70]
Dimensions
No. of
Pos.
Post Plating/Part Nos.
Post Plating/Part Nos.
Plating A
A
B
Plating A
Plating B
Plating B
5-146133-1
5-146133-2
5-146133-3
5-146133-4
5-146133-5
5-146133-6
5-146133-7
5-146133-8
5-146133-9
6-146133-0
6-146133-1
6-146133-2
6-146133-3
3
4
5
6
7
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
5-146128-1
5-146128-2
5-146128-3
5-146128-4
5-146128-5
5-146128-6
5-146128-7
5-146128-8
5-146128-9
6-146128-0
6-146128-1
6-146128-2
6-146128-3
5-146132-1
5-146132-2
5-146132-3
5-146132-4
5-146132-5
5-146132-6
5-146132-7
5-146132-8
5-146132-9
6-146132-0
6-146132-1
6-146132-2
6-146132-3
5-146129-1
5-146129-2
5-146129-3
5-146129-4
5-146129-5
5-146129-6
5-146129-7
5-146129-8
5-146129-9
6-146129-0
6-146129-1
6-146129-2
6-146129-3
8
9
10
11
12
13
14
15
1.084 [27.53] 1.000 [25.40]
1.184 [30.07] 1.100 [27.94]
1.284 [32.61] 1.200 [30.48]
1.384 [35.15] 1.300 [33.02]
1.484 [37.69] 1.400 [35.56]
Note: All part numbers are RoHS compliant.
109
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Breakaway Surface Mount Headers—Unshrouded
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
A
B
.025 [0.64] Square
Straight Post
.100
Typ.
[2.54]
.192
[4.88]
.100
[2.54]
D Ref.
(Contact Area)
Material and Finish
C
Housing — Black thermoplastic, 94V-0
rated
Posts — Phosphor bronze, plated as
follows:
.090
[2.29]
.025
[0.64]
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel entire post
.042
[1.07]
Typ.
.063
[1.60]
.292
[7.42]
B
.050
[1.27]
.100
Typ.
[2.54]
.140 .003
[3.56 0.08]
.205
[5.21]
.345
[8.76]
Related Product Data
Mateable Receptacles —
Refer to Mating Post Selection Guide —
page 90
.065
[1.65]
.050 .003
[1.27 0.08]
Recommended Etched Circuit Layout
(Using .008 [0.20] thick stencil)
5
C = .230 [5.84]
D = .185 [4.70]
C = .320 [8.13]
D = .200 [5.08]
Dimensions
No. of
Post Plating/Part Nos.
Plating A
Post Plating/Part Nos.
Plating A
Pos.
A
B
Plating B
5-146134-1
5-146134-2
5-146134-3
1-146134-7
5-146134-5
5-146134-6
1-146134-9
5-146134-8
5-146134-9
6-146134-0
6-146134-1
6-146134-2
6-146134-3
2-146134-1
Plating B
5-146135-1
1-146135-6
5-146135-3
5-146135-4
5-146135-5
5-146135-6
5-146135-7
5-146135-8
5-146135-9
6-146135-0
6-146135-1
6-146135-2
6-146135-3
6-146135-4
4
6
8
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
5-146130-1
5-146130-2
5-146130-3
5-146130-4
5-146130-5
5-146130-6
5-146130-7
5-146130-8
5-146130-9
6-146130-0
6-146130-1
6-146130-2
6-146130-3
6-146130-4
5-146131-1
5-146131-2
5-146131-3
5-146131-4
5-146131-5
5-146131-6
5-146131-7
5-146131-8
5-146131-9
6-146131-0
6-146131-1
6-146131-2
6-146131-3
6-146131-4
10
12
14
16
18
20
22
24
26
28
30
1.084 [27.53] 1.000 [25.40]
1.184 [30.07] 1.100 [27.94]
1.284 [32.61] 1.200 [30.48]
1.384 [35.15] 1.300 [33.02]
1.484 [37.69] 1.400 [35.56]
Note: All part numbers are RoHS compliant.
110
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Unshrouded Stacking Headers—Breakaway
.100 x .100 [2.54 x 2.54] Centerline
Product Facts
I Available in single and
double row
I Parallel PC board stacking
with numerous stack
heights available
I Drawn wire posts allow
4 side mateability
I May eliminate the need for
additional board spacers
I Can be used in
conjunction with bottom
entry receptacles
I Gold or tin plated
I Up to 1.430 [36.32] overall
post length
I Retention and surface
mount features available
upon request
I Other header sizes can be
made upon request
I Tape and reel packaging
available. Contact TE.
I Pick-and-place cap avail-
able for vacuum placement.
Contact TE.
5
111
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Unshrouded Stacking Headers — Breakaway,
Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Straight Posts
.092
[2.34]
.046 .003
[1.17 0.08]
Header Size
No. of Pos. x .100 [2.54]
.025 .001
[0.64 0.03]
Typ.
B
A
C
.090 .003
[2.29 0.08]
Material and Finish
.042 .008
[1.07 0.20]
4 Places
Housing — Black thermoplastic,
94V-0 rated
D
Posts — Phosphor bronze, plated as
follows:
Plating — As noted in chart:
.100 .003
[2.54 0.08]
Typ.
Tin — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127]
nickel entire post
Tolerance Non-Cumulative
15Au — .000015 [0.00038] gold over
.000050 [0.00127] nickel entire post
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
Related Product Data
Mateable Receptacles —
Refer to the Mating Post Selection
Guide — page 88
Base
Number
(see note)
A
B
Tail
Length
C
Post
Length
D
B End
Plating
D End
Plating
Stack
Height
Mating
Length
146455
146456
146457
146458
146459
146460
146461
146462
146463
146464
146465
146466
146467
146468
146469
146470
146471
146472
146473
146474
146475
146476
146477
146478
146479
146480
146481
146482
.200 [5.08]
.250 [6.35]
.250 [6.35]
.130 [3.30]
.080 [2.03]
.114 [2.89]
.123 [3.12]
.107 [2.71]
.057 [1.45]
.129 [3.27]
.109 [2.77]
.107 [2.71]
.087 [2.20]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05] 1.030 [26.16]
.100 [2.54] 1.030 [26.16]
.330 [8.38] 1.030 [26.16]
.120 [3.05] 1.130 [28.70]
.100 [2.54] 1.130 [28.70]
.330 [8.38] 1.130 [28.70]
.120 [3.05] 1.230 [31.24]
.100 [2.54] 1.230 [31.24]
.330 [8.38] 1.230 [31.24]
.120 [3.05] 1.330 [33.78]
.100 [2.54] 1.330 [33.78]
.330 [8.38] 1.330 [33.78]
.120 [3.05] 1.430 [36.32]
.100 [2.54] 1.430 [36.32]
.330 [8.38] 1.430 [36.32]
.440 [11.17]
.440 [11.17]
.474 [12.03]
.533 [13.53]
.617 [15.67]
.617 [15.67]
.739 [18.77]
.739 [18.77]
.817 [20.75]
.817 [20.75]
.930 [23.62]
.930 [23.62]
.930 [23.62]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
TIN
TIN
TIN
TIN
Technical Documents — page 276
TIN
TIN
5
See mating connector for applicable
product and application specifications.
.300 [7.62]
TIN
TIN
.400 [10.16]
.450 [11.43]
.500 [12.70]
.300 [7.62]
.600 [15.24]
.400 [10.16]
.700 [17.78]
.500 [12.70]
.270 [6.86]
TIN
TIN
TIN
TIN
TIN
TIN
Retention and surface mount fea-
tures available upon request.
Other header sizes can be made
upon request.
TIN
15 AU
TIN
TIN
TIN
15 AU
TIN
TIN
TIN
15 AU
15 AU
TIN
15 AU
TIN
.800 [20.32]
.600 [15.24]
.370 [9.39]
TIN
15 AU
15 AU
TIN
15 AU
TIN
.900 [22.86]
.700 [17.78]
.470 [11.39]
1.000 [25.40]
.800 [20.32]
.570 [14.47]
1.100 [27.94]
.900 [22.68]
.670 [17.01]
1.200 [30.48]
1.000 [25.40]
.770 [19.55]
TIN
15 AU
15 AU
TIN
15 AU
TIN
TIN
15 AU
15 AU
TIN
15 AU
TIN
*Note: Headers are available in sizes
1 thru 40. When ordering, add the
prefix and/or suffix (dash) numbers
plus 5- -0 to the base part number
that corresponds with the number of
positions per row. For example, the
complete part number for an 8-position
header is 5-146455-8. The complete
part number for a 16-position of the
same series would be 6-146455-6.
TIN
15 AU
15 AU
TIN
15 AU
TIN
TIN
15 AU
15 AU
15 AU
Note: All part numbers are RoHS compliant.
112
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Unshrouded Stacking Headers — Breakaway,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Posts
.192
[4.88]
.046 .003
[1.17 0.08]
Header Size
No. of Pos. x .100 [2.54]
.100
[2.54]
.025 .001
[0.64 0.03]
Typ.
B
C
A
.090 .003
[2.29 0.08]
Material and Finish
Housing — Black thermoplastic,
.042 .008
[1.07 0.20]
4 Places
94V-0 rated
D
Posts — Phosphor bronze, plated as
follows:
Plating — As noted in chart:
.100 .003
[2.54 0.08]
Tolerance Non-Cumulative
Typ.
Tin — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127]
nickel entire post
.100 .003
[2.54 0.08]
15Au — .000015 [0.00038] gold over
.000050 [0.00127] nickel entire post
.035 .003
[0.89 0.08]
Dia. Typ.
Related Product Data
Recommended PC Board Hole Layout
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
Base
Number
(see note)
A
B
Tail
C
Post
D
B End
Plating
D End
Plating
Stack
Height
Mating
Length
Length
Length
146483
146484
146485
146486
146487
146488
146489
146490
146491
146492
146493
146494
146495
146496
146497
146498
146499
146500
146501
146502
146503
146504
146505
146506
146507
146508
146509
146510
.200 [5.08]
.250 [6.35]
.250 [6.35]
.130 [3.30]
.080 [2.03]
.114 [2.89]
.123 [3.12]
.107 [2.71]
.057 [1.45]
.129 [3.27]
.109 [2.77]
.107 [2.71]
.087 [2.20]
.120 [3.05]
.100 [2.54]
.330 [8.38]
.120 [3.05] 1.030 [26.16]
.100 [2.54] 1.030 [26.16]
.330 [8.38] 1.030 [26.16]
.120 [3.05] 1.130 [28.70]
.100 [2.54] 1.130 [28.70]
.330 [8.38] 1.130 [28.70]
.120 [3.05] 1.230 [31.24]
.100 [2.54] 1.230 [31.24]
.330 [8.38] 1.230 [31.24]
.120 [3.05] 1.330 [33.78]
.100 [2.54] 1.330 [33.78]
.330 [8.38] 1.330 [33.78]
.120 [3.05] 1.430 [36.32]
.100 [2.54] 1.430 [36.32]
.330 [8.38] 1.430 [36.32]
.440 [11.17]
.440 [11.17]
.474 [12.03]
.533 [13.53]
.617 [15.67]
.617 [15.67]
.739 [18.77]
.739 [18.77]
.817 [20.75]
.817 [20.75]
.930 [23.62]
.930 [23.62]
.930 [23.62]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.110 [2.79]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
.110 [2.79]
.330 [8.38]
.330 [8.38]
TIN
TIN
TIN
TIN
Technical Documents — page 276
TIN
TIN
See mating connector for applicable
product and application specifications.
5
.300 [7.62]
TIN
TIN
.400 [10.16]
.450 [11.43]
.500 [12.70]
.300 [7.62]
.600 [15.24]
.400 [10.16]
.700 [17.78]
.500 [12.70]
.270 [6.86]
TIN
TIN
TIN
TIN
Retention and surface mount
features available upon request.
Other header sizes can be made
upon request.
TIN
TIN
TIN
15 AU
TIN
TIN
TIN
15 AU
TIN
TIN
TIN
15 AU
15 AU
TIN
15 AU
TIN
.800 [20.32]
.600 [15.24]
.370 [9.39]
TIN
15 AU
15 AU
TIN
15 AU
TIN
.900 [22.86]
.700 [17.78]
.470 [11.93]
1.000 [25.40]
.800 [20.32]
.570 [14.74]
1.100 [27.94]
.900 [22.68]
.670 [17.01]
1.200 [30.48]
1.000 [25.40]
.770 [19.55]
TIN
15 AU
15 AU
TIN
15 AU
TIN
TIN
15 AU
15 AU
TIN
*Note: Headers are available in sizes
2 thru 80. When ordering, add the
prefix and/or suffix (dash) numbers
plus 5- -0 to the base part number
that corresponds with the number of
positions per row. For example, the
complete part number for a 16-position
header is 5-146283-8. The complete
part number for a 32-position of the
same series would be 6-146283-6.
15 AU
TIN
TIN
15 AU
15 AU
TIN
15 AU
TIN
TIN
15 AU
15 AU
15 AU
Note: All part numbers are RoHS compliant.
113
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded
Product Facts
I Available in several styles—
right-angle with three- and
four-sided pin protection,
and straight post with pin
protection and mounting ears
I Post retention feature
available
I Can be used for feed-to and
feed-thru applications
I Housings are black
thermoplastic, flame
retardant 94V-0 rated
I Contacts are copper alloy
I Available in gold duplex,
gold over nickel and tin over
nickel platings
I Headers with .066 [1.68]
and .150 [3.81] end dimen-
sions are available in select
sizes up to 60 positions
I Can be select loaded,
consult TE
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.
R
Performance
File No. E28476
Characteristics
I Certified by Canadian
Electrical
Insulation Resistance — 5,000
megohms minimum initial
Dielectric Withstanding Voltage —
750 RMS at sea level
Standards
R
Association,
File No. LR 7189
5
Environmental
Operating Temperature —
-65°C to +105°C (black thermoplastic
housings)
Current — 3 amperes maximum
per contact
114
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, Single-Row,
.100 [2.54] Centerline
.025 [0.64] Square
Straight Post (with Standoffs)
.549
[13.94]
.200
[5.08]
Ref.
(Contact Area)
A
.110
[2.79]
Typ.
Material and Finish
.219
[5.56]
C
.134
[3.40]
Housing — Black thermoplastic,
94V-0 rated
.100
[2.54]
Typ.
Posts — Phosphor bronze, plated as
follows:
.214
[5.44]
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508] tin
on solder area, with entire post under-
plated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508] tin
on solder area, with entire post under-
plated .000050 [0.00127] nickel
.130
[3.30]
.013
[0.33]
(Standoffs)
.070
[1.78]
Typ.
.240
[6.10]
.330
[8.38]
.040
[1.02]
Typ.
B
C
.100*
[2.54]
Typ.
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Related Product Data
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 215
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
5
AMPMODU MTE Receptacles —
Dimensions
Post Plating/Part Nos.
Plating B Plating C
No. of
Pos.
pages 228, 229, 234
A
B
C
Plating A
5-103414-1
5-103414-2
5-103414-3
5-103414-4
5-103414-5
5-103414-6
5-103414-7
5-103414-8
5-103414-9
6-103414-0
6-103414-1
6-103414-2
6-103414-3
6-103414-4
6-103414-5
6-103414-6
6-103414-7
6-103414-8
6-103414-9
7-103414-0
7-103414-1
7-103414-2
7-103414-3
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.45]
1.220 [30.99]
1.320 [33.53]
1.420 [36.07]
1.520 [38.61]
1.620 [41.15]
1.720 [43.69]
1.820 [46.23]
1.920 [48.77]
2.020 [51.31]
2.120 [53.85]
2.220 [56.39]
2.320 [58.93]
2.420 [61.47]
2.520 [64.01]
2.620 [66.55]
.340 [8.64]
.200 [5.08]
.300 [7.62]
8-102202-4
5-102202-1
5-102202-2
5-102202-3
5-102202-4
5-102202-5
5-102202-6
5-102202-7
5-102202-8
5-102202-9
6-102202-0
6-102202-1
6-102202-2
6-102202-3
6-102202-4
6-102202-5
6-102202-6
6-102202-7
6-102202-8
6-102202-9
7-102202-0
7-102202-1
7-102202-2
5-103080-1
5-103080-2
5-103080-3
5-103080-4
5-103080-5
5-103080-6
5-103080-7
5-103080-8
5-103080-9
6-103080-0
6-103080-1
6-103080-2
6-103080-3
6-103080-4
6-103080-5
6-103080-6
6-103080-7
6-103080-8
6-103080-9
7-103080-0
7-103080-1
7-103080-2
7-103080-3
Technical Documents — page 276
.440 [11.18]
.540 [13.72]
.640 [16.26]
.740 [18.80]
.840 [21.34]
.940 [23.88]
1.040 [26.42]
1.140 [28.96]
1.240 [31.50]
1.340 [34.04]
1.440 [36.58]
1.540 [39.12]
1.640 [41.66]
1.740 [44.20]
1.840 [46.74]
1.940 [49.28]
2.040 [51.82]
2.140 [54.36]
2.240 [56.90]
2.340 [59.44]
2.440 [61.98]
2.540 [64.52]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
See mating connector for applicable
product and application specifications.
Note: All part numbers are RoHS compliant.
115
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, Single-Row,
.100 [2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post
(with Standoffs)
.549
[13.94]
A
.240
[6.10]
.219
[5.56]
.134
[3.40]
C
Typ.
.200
[5.08]
(Contact Area)
Ref.
.100
[2.54]
.110
[2.79]
Material and Finish
.214
[5.44]
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
.330
[8.38]
.151
[3.84]
.013
[0.33]
(Standoffs)
follows:
.070
[1.78]
Typ.
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
B
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
.040
[1.02]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
C
.035 .003
[0.89 0.08]
Dia.
.100*
[2.54]
Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 215
Dimensions
B
Post Plating/Part Nos.
No. of
Pos.
5
A
C
Plating A
5-103361-1
5-103361-2
5-103361-3
5-103361-4
5-103361-5
5-103361-6
5-103361-7
5-103361-8
5-103361-9
6-103361-0
6-103361-1
6-103361-2
6-103361-3
6-103361-4
6-103361-5
6-103361-6
6-103361-7
6-103361-8
6-103361-9
7-103361-0
7-103361-1
7-103361-2
7-103361-3
Plating B
8-102203-4
5-102203-1
5-102203-2
5-102203-3
5-102203-4
5-102203-5
5-102203-6
5-102203-7
5-102203-8
5-102203-9
6-102203-0
6-102203-1
6-102203-2
6-102203-3
6-102203-4
6-102203-5
6-102203-6
6-102203-7
6-102203-8
6-102203-9
7-102203-0
7-102203-1
7-102203-2
Plating C
5-102523-1
5-102523-2
5-102523-3
5-102523-4
5-102523-5
5-102523-6
5-102523-7
5-102523-8
5-102523-9
6-102523-0
6-102523-1
6-102523-2
6-102523-3
6-102523-4
6-102523-5
6-102523-6
6-102523-7
6-102523-8
6-102523-9
7-102523-0
7-102523-1
7-102523-2
7-102523-3
AMPMODU MTE Receptacles —
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.45]
1.220 [30.99]
1.320 [33.53]
1.420 [36.07]
1.520 [38.61]
1.620 [41.15]
1.720 [43.69]
1.820 [46.23]
1.920 [48.77]
2.020 [51.31]
2.120 [53.85]
2.220 [56.39]
2.320 [58.93]
2.420 [61.47]
2.520 [64.01]
2.620 [66.55]
.340 [8.64]
.200 [5.08]
.300 [7.62]
pages 228, 229, 234
.440 [11.18]
.540 [13.72]
.640 [16.26]
.740 [18.80]
.840 [21.34]
.940 [23.88]
1.040 [26.42]
1.140 [28.96]
1.240 [31.50]
1.340 [34.04]
1.440 [36.58]
1.540 [39.12]
1.640 [41.66]
1.740 [44.20]
1.840 [46.74]
1.940 [49.28]
2.040 [51.82]
2.140 [54.36]
2.240 [56.90]
2.340 [59.44]
2.440 [61.98]
2.540 [64.52]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
Note: All part numbers are RoHS compliant.
116
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.040
[1.02]
(3 Plc.)
.025 [0.64] Square
Straight Post (with
Detent Windows)
B
.318
.066
[1.68]
(2 Plc.)
[8.08]
C
.200
[5.08]
Ref.
.125
.100
[2.54]
Typ.
[3.18]
(Contact Area)
.100
[2.54]
.400
[10.16]
.280
[7.11]
.090
[2.29]
(2 Plc.)
.090
[2.29]
A
.240
[6.10]
Typ.
E
D
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
.440
[11.18]
Posts — Phosphor bronze, plated as
follows:
.080
[2.03]
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
C
.100*
[2.54]
Typ.
.100*
[2.54]
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
.035 .003
Dia. Typ.
[0.89 0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data
Mateable Connectors —
AMPMODU Board Mount
5
Receptacles — pages 176, 179, 180
Dimensions
Post Plating/Part Nos.
No. of
Pos.
A
B
C
D
E
—
—
—
—
—
—
—
Plating A
5-103168-1
5-103168-2
5-103168-3
5-103168-4
5-103168-5
5-103168-6
5-103168-7
Plating B
5-102618-1
5-102618-2
5-102618-3
5-102618-4
5-102618-5
5-102618-6
5-102618-7
5-102618-8
5-102618-9
6-102618-0
6-102618-1
6-102618-2
6-102618-3
Plating C
8-87589-6
8-87589-5
5-87589-1
5-87589-2
5-87589-3
5-87589-4
5-87589-5
5-87589-6
5-87589-7
5-87589-8
5-87589-9
6-87589-0
6-87589-1
AMPMODU Wire-Applied
Receptacles — pages 216-219
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
6
.412 [10.46]
.512 [13.00]
.612 [15.54]
.712 [18.08]
.812 [20.62]
.912 [23.16]
1.012 [25.70
.332 [8.43]
.200 [5.08]
.106 [2.69]
.106 [2.69]
8
.432 [10.97] .300 [7.62]
10
12
14
16
18
20
22
24
26
28
30
.532 [13.51] .400 [10.16] .206 [5.23]
.632 [16.05] .500 [12.70] .206 [5.23]
.732 [18.59] .600 [15.24] .306 [7.77]
.832 [21.13] .700 [17.78] .306 [7.77]
.932 [23.67] .800 [20.32] .406 [10.31]
Accessories
1.112 [28.24] 1.032 [26.21] .900 [22.86] .106 [2.69]
1.212 [30.78] 1.132 [28.75] 1.000 [25.40] .106 [2.69]
.806 [20.47]
.906 [23.01]
5-103168-8
5-103168-9
6-103168-0
6-103168-1
6-103168-2
6-103168-3
Barrier Insert — page 204
1.312 [33.32] 1.232 [31.29] 1.100 [27.94] .106 [2.69] 1.006 [25.55]
1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09]
1.512 [38.40] 1.432 [36.37] 1.300 [33.02] .106 [2.69] 1.206 [30.63]
1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17]
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
Note: All part numbers are RoHS compliant.
117
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
C
Post Plating/Part Nos.
Plating A Plating C
No. of
Positions
A
B
D
E
Plating B
6-102618-4
6-102618-5
6-102618-6
6-102618-7
6-102618-8
6-102618-9
7-102618-0
7-102618-1
7-102618-2
7-102618-3
7-102618-4
7-102618-5
7-102618-6
7-102618-7
7-102618-8
7-102618-9
8-102618-0
8-102618-1
8-102618-2
8-102618-3
8-102618-4
8-102618-5
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
1.712 [43.48] 1.632 [41.45] 1.500 [38.10] .106 [2.69] 1.406 [35.71]
1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25]
1.912 [48.56] 1.832 [46.53] 1.700 [43.18] .106 [2.69] 1.606 [40.79]
2.012 [51.10] 1.932 [49.07] 1.800 [45.72] .106 [2.69] 1.706 [43.33]
2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87]
2.212 [56.18] 2.132 [54.15] 2.000 [50.80] .106 [2.69] 1.906 [48.41]
2.312 [58.72] 2.232 [56.69] 2.100 [53.34] .106 [2.69] 2.006 [50.95]
6-103168-4
6-103168-5
6-103168-6
6-103168-7
6-103168-8
6-103168-9
7-103168-0
7-103168-1
7-103168-2
7-103168-3
7-103168-4
7-103168-5
7-103168-6
7-103168-7
7-103168-8
7-103168-9
8-103168-0
8-103168-1
8-103168-2
8-103168-3
8-103168-4
8-103168-5
6-87589-2
6-87589-3
6-87589-4
6-87589-5
6-87589-6
6-87589-7
6-87589-8
6-87589-9
7-87589-0
7-87589-1
7-87589-2
7-87589-3
7-87589-4
7-87589-5
7-87589-6
7-87589-7
7-87589-8
7-87589-9
8-87589-0
8-87589-1
8-87589-2
8-87589-3
2.412 [61.26] 2.332 [59.23] 2.200 [55.88]
.106 [2.69] 2.106 [53.49]
2.512 [63.80] 2.432 [61.77] 2.300 [58.42] .106 [2.69] 2.206 [56.03]
2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57]
2.712 [68.88] 2.632 [66.85] 2.500 [63.50] .106 [2.69] 2.406 [61.11]
2.812 [71.42] 2.732 [69.39] 2.600 [66.04] .106 [2.69] 2.506 [63.65]
2.912 [73.96] 2.832 [71.93] 2.700 [68.58] .106 [2.69] 2.606 [66.19]
3.012 [76.50] 2.932 [74.47] 2.800 [71.12] .106 [2.69] 2.706 [68.73]
3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27]
3.212 [81.58] 3.132 [79.55] 3.000 [76.20] .106 [2.69] 2.906 [73.81]
3.312 [84.12] 3.232 [82.09] 3.100 [78.74] .106 [2.69] 3.006 [76.35]
3.412 [86.66] 3.332 [84.63] 3.200 [81.28] .106 [2.69] 3.106 [78.89]
3.512 [89.20] 3.432 [87.17] 3.300 [83.82] .106 [2.69] 3.206 [81.43]
3.612 [91.74] 3.532 [89.71] 3.400 [86.36] .106 [2.69] 3.306 [83.97]
3.712 [94.28] 3.632 [92.25] 3.500 [88.90] .106 [2.69] 3.406 [86.51]
3.812 [96.82] 3.732 [94.79] 3.600 [91.44] .106 [2.69] 3.506 [89.05]
5
118
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.040
[1.02]
(3 Plc.)
.025 [0.64] Square
Straight Post (with
Detent Windows)
B
C
.150
[3.81]
(2 Plc.)
.318
[8.08]
.200
[5.08]
(Contact Area)
.125
[3.18]
.100
[2.54]
Ref.
Typ.
.100
[2.54]
.400
[10.16]
.280
[7.11]
.090
[2.29]
(2 Plc.)
.090
[2.29]
A
.240
[6.10]
Typ.
E
D
.080
[2.03]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
.440
[11.18]
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
C
.100*
[2.54]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
.100*
[2.54]
.035 .003
Dia. Typ.
[0.89 0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
5
Dimensions
Post Plating/Part Nos.
No. of
Pos.
A
B
C
D
E
Plating A
5-103169-1
5-103169-2
5-103169-3
5-103169-4
5-103169-5
5-103169-6
5-103169-7
5-103169-8
5-103169-9
6-103169-0
6-103169-1
6-103169-2
6-103169-3
Plating B
5-102619-1
5-102619-2
5-102619-3
5-102619-4
5-102619-5
5-102619-6
5-102619-7
5-102619-8
5-102619-9
6-102619-0
6-102619-1
6-102619-2
6-102619-3
Plating C
6
.580 [14.73]
.680 [17.27]
.780 [19.81]
.880 [22.35]
.980 [24.89]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
.200 [5.08]
.300 [7.62]
.190 [4.83]
.190 [4.83]
—
8-87587-3
8-87587-4
5-87587-1
5-87587-2
5-87587-3
5-87587-4
5-87587-5
5-87587-6
5-87587-7
5-87587-8
5-87587-9
6-87587-0
6-87587-1
8
—
Accessories
Barrier Insert — page 204
10
12
14
16
18
20
22
24
26
28
30
.400 [10.16] .290 [7.37]
.500 [12.70] .290 [7.37]
.600 [15.24] .390 [9.91]
.700 [17.78] .390 [9.91]
.800 [20.32] .490 [12.45]
.900 [22.86] .190 [4.83]
—
—
—
1.080 [27.43] 1.000 [25.40]
1.180 [29.97] 1.100 [27.94]
1.280 [32.51] 1.200 [30.48]
—
Technical Documents — page 276
—
See mating connector for applicable
product and application specifications.
.890 [22.61]
.990 [25.15]
1.380 [35.05] 1.300 [33.02] 1.000 [25.40] .190 [4.83]
1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69]
1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23]
1.680 [42.67] 1.600 [40.64] 1.300 [33.02] .190 [4.83] 1.290 [32.77]
1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31]
Note: All part numbers are RoHS compliant.
119
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
C
Post Plating/Part Nos.
No. of
Pos.
A
B
D
E
Plating A
Plating B
Plating C
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
1.880 [47.75] 1.800 [45.72] 1.500 [38.10] .190 [4.83] 1.490 [37.85]
1.980 [50.29] 1.900 [48.26] 1.600 [40.64] .190 [4.83] 1.590 [40.39]
2.080 [52.83] 2.000 [50.80] 1.700 [43.18] .190 [4.83] 1.690 [42.93]
2.180 [55.37] 2.100 [53.34] 1.800 [45.72] .190 [4.83] 1.790 [45.47]
2.280 [57.91] 2.200 [55.88] 1.900 [48.26] .190 [4.83] 1.890 [48.01]
2.380 [60.45] 2.300 [58.42] 2.000 [50.80] .190 [4.83] 1.990 [50.55]
2.480 [62.99] 2.400 [60.96] 2.100 [53.34] .190 [4.83] 2.090 [53.09]
2.580 [65.53] 2.500 [63.50] 2.200 [55.88] .190 [4.83] 2.190 [55.63]
2.680 [68.07] 2.600 [66.04] 2.300 [58.42] .190 [4.83] 2.290 [58.17]
2.780 [70.61] 2.700 [68.58] 2.400 [60.96] .190 [4.83] 2.390 [60.71]
2.880 [73.15] 2.800 [71.12] 2.500 [63.50] .190 [4.83] 2.490 [63.25]
2.980 [75.69] 2.900 [73.66] 2.600 [66.04] .190 [4.83] 2.590 [65.79]
3.080 [78.23] 3.000 [76.20] 2.700 [68.58] .190 [4.83] 2.690 [68.33]
3.180 [80.77] 3.100 [78.74] 2.800 [71.12] .190 [4.83] 2.790 [70.87]
3.280 [83.31] 3.200 [81.28] 2.900 [73.66] .190 [4.83] 2.890 [73.41]
3.380 [85.85] 3.300 [83.82] 3.000 [76.20] .190 [4.83] 2.990 [75.95]
3.480 [88.39] 3.400 [86.36] 3.100 [78.74] .190 [4.83] 3.090 [78.49]
3.580 [90.93] 3.500 [88.90] 3.200 [81.28] .190 [4.83] 3.190 [81.03]
3.680 [93.47] 3.600 [91.44] 3.300 [83.82] .190 [4.83] 3.290 [83.57]
3.780 [96.01] 3.700 [93.98] 3.400 [86.36] .190 [4.83] 3.390 [86.11]
3.880 [98.55] 3.800 [96.52] 3.500 [88.90] .190 [4.83] 3.490 [88.65]
6-103169-4
6-103169-5
6-103169-6
6-103169-7
6-103169-8
6-103169-9
7-103169-0
7-103169-1
7-103169-2
7-103169-3
7-103169-4
7-103169-5
7-103169-6
7-103169-7
7-103169-8
7-103169-9
8-103169-0
8-103169-1
8-103169-2
8-103169-3
8-103169-4
6-102619-4
6-102619-5
6-102619-6
6-102619-7
6-102619-8
6-102619-9
7-102619-0
7-102619-1
7-102619-2
7-102619-3
7-102619-4
7-102619-5
7-102619-6
7-102619-7
7-102619-8
7-102619-9
8-102619-0
8-102619-1
8-102619-2
8-102619-3
8-102619-4
6-87587-2
6-87587-3
6-87587-4
6-87587-5
6-87587-6
6-87587-7
6-87587-8
6-87587-9
7-87587-0
7-87587-1
7-87587-2
7-87587-3
7-87587-4
7-87587-5
7-87587-6
7-87587-7
7-87587-8
7-87587-9
8-87587-0
8-87587-1
8-87587-2
5
Note: All part numbers are RoHS compliant.
120
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.200
Ref.
.025 [0.64] Square
Straight Post (with
Plastic Holddowns)
[5.08]
.040
[1.02]
(3 Plc.)
(Contact Area)
B
C
.150
[3.81]
(2 Plc.)
.318
[8.08]
.125
.100
[2.54]
Typ.
[3.18]
.100
[2.54]
.400
[10.16]
.280
[7.11]
.090
[2.29]
(2 Plc.)
.050
[1.27]
.015
[.020]
(2 Plc.)
.090
[2.29]
.180
A
0.38
[4.57]
]
[0.51]
[
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
.440
[11.18]
Posts — Phosphor bronze, duplex
plated .000015 [0.00038] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder area,
with entire post underplated .000050
[0.00127] nickel
C
.140
[3.56]
(2 Plc.)
.100*
[2.54]
.100*
[2.54]
Typ.
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
.040 .003
+.004
Dia. Typ.
Dia. Typ.
.093
[1.02 0.08]
-.000
.093
+0.10
-.000
2.36
[
]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
2.36
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
5
Accessories
Barrier Insert — page 204
No. of
Pos.
6
Dimensions
B
Part Nos.
Plating A
A
C
.580 [14.73]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.280 [32.51]
1.380 [35.05]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.880 [47.75]
1.980 [50.29]
2.080 [52.83]
2.280 [57.91]
2.380 [60.45]
2.680 [68.07]
2.780 [70.61]
.500 [12.70]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.200 [55.88]
2.300 [58.42]
2.600 [66.04]
2.700 [68.58]
.200 [5.08]
5-104317-1
5-104317-2
5-104317-3
5-104317-4
6-104317-6
5-104317-5
5-104317-6
5-104317-7
5-104317-8
5-104317-9
6-104317-0
6-104317-1
6-104317-8
6-104317-7
6-104317-2
6-104317-5
6-104317-3
6-104317-4
10
12
14
16
18
20
22
24
26
30
32
34
36
40
42
48
50
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.900 [48.26]
2.000 [50.80]
2.300 [58.42]
2.400 [60.96]
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
Note: All part numbers are RoHS compliant.
121
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.040
[1.02]
(3 Plc.)
.318
[8.08]
.025 [0.64] Square
Right-Angle Post
(with Detent Windows)
B
.200
[5.08]
(Contact Area)
.066
[1.68]
(2 Plc.)
Ref.
C
.100
[2.54]
Typ.
.100
[2.54]
.280
[7.11]
.135
[3.43]
.400
[10.16]
.013
[0.33]
(Standoffs)
.090
[2.29]
(2 Plc.)
A
.157
[3.99]
Material and Finish
.100
[2.54]
Housing — Black thermoplastic,
94V-0 rated
.240
[6.10]
Typ.
E
Posts — Phosphor bronze, plated as
follows:
D
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
.489
[12.42]
.080
[2.03]
.639
[16.23]
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
C
.100*
[2.54]
Typ.
Related Product Data
Mateable Connectors
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 216-219
.100*
[2.54]
.035 .003
Dia. Typ.
[0.89 0.08]
5
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
Dimensions
Post Plating/Part Nos.
No. of
Pos.
A
B
C
D
E
Plating A
Plating B
Plating C
Technical Documents — page 276
6
.412 [10.46] .332 [8.43]
.512 [13.00] .432 [10.97]
.612 [15.54] .532 [13.51]
.712 [18.08] .632 [16.05]
.812 [20.62] .732 [18.59]
.912 [23.16] .832 [21.13]
1.012 [25.70] .932 [23.67]
1.112 [28.24] 1.032 [26.21]
.200 [5.08] .106 [2.69]
.300 [7.62] .106 [2.69]
.400 [10.16] .206 [5.23]
.500 [12.70] .206 [5.23]
.600 [15.24] .306 [7.77]
.700 [17.78] .306 [7.77]
.800 [20.32] .406 [10.31]
.900 [22.86] .106 [2.69]
—
5-103166-1
5-103166-2
5-103166-3
5-103166-4
5-103166-5
5-103166-6
5-103166-7
5-103166-8
5-103166-9
6-103166-0
6-103166-1
6-103166-2
6-103166-3
5-102617-1
5-102617-2
5-102617-3
5-102617-4
5-102617-5
5-102617-6
5-102617-7
5-102617-8
5-102617-9
6-102617-0
6-102617-1
6-102617-2
6-102617-3
8-87579-5
5-87579-1
5-87579-2
5-87579-3
5-87579-4
5-87579-5
5-87579-6
5-87579-7
5-87579-8
5-87579-9
6-87579-0
6-87579-1
6-87579-2
8
—
See mating connector for applicable
product and application specifications.
10
12
14
16
18
20
22
24
26
28
30
—
—
—
—
—
.806 [20.47]
.906 [23.01]
1.212 [30.78] 1.132 [28.75] 1.000 [25.40] .106 [2.69]
1.312 [33.32] 1.232 [31.29] 1.100 [27.94] .106 [2.69] 1.006 [25.55]
1.412 [35.86] 1.332 [33.83] 1.200 [30.48] .106 [2.69] 1.106 [28.09]
1.512 [38.40] 1.432 [36.37] 1.300 [33.02] .106 [2.69] 1.206 [30.63]
1.612 [40.94] 1.532 [38.91] 1.400 [35.56] .106 [2.69] 1.306 [33.17]
Note: All part numbers are RoHS compliant.
122
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
C
Post Plating/Part Nos.
No. of
Pos.
A
B
D
E
Plating A
Plating B
Plating C
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
1.712 [43.48] 1.632 [41.45] 1.500 [38.10] .106 [2.69] 1.406 [35.71] 6-103166-4
1.812 [46.02] 1.732 [43.99] 1.600 [40.64] .106 [2.69] 1.506 [38.25] 6-103166-5
1.912 [48.56] 1.832 [46.53] 1.700 [43.18] .106 [2.69] 1.606 [40.79] 6-103166-6
2.012 [51.10] 1.932 [49.07] 1.800 [45.72] .106 [2.69] 1.706 [43.33] 6-103166-7
2.112 [53.64] 2.032 [51.61] 1.900 [48.26] .106 [2.69] 1.806 [45.87] 6-103166-8
2.212 [56.18] 2.132 [54.15] 2.000 [50.80] .106 [2.69] 1.906 [48.41] 6-103166-9
2.312 [58.72] 2.232 [56.69] 2.100 [53.34] .106 [2.69] 2.006 [50.95] 7-103166-0
2.412 [61.26] 2.332 [59.23] 2.200 [55.88] .106 [2.69] 2.106 [53.49] 7-103166-1
2.512 [63.80] 2.432 [61.77] 2.300 [58.42] .106 [2.69] 2.206 [56.03] 7-103166-2
2.612 [66.34] 2.532 [64.31] 2.400 [60.96] .106 [2.69] 2.306 [58.57] 7-103166-3
2.712 [68.88] 2.632 [66.85] 2.500 [63.50] .106 [2.69] 2.406 [61.11] 7-103166-4
2.812 [71.42] 2.732 [69.39] 2.600 [66.04] .106 [2.69] 2.506 [63.65] 7-103166-5
2.912 [73.96] 2.832 [71.93] 2.700 [68.58] .106 [2.69] 2.606 [66.19] 7-103166-6
3.012 [76.50] 2.932 [74.47] 2.800 [71.12] .106 [2.69] 2.706 [68.73] 7-103166-7
3.112 [79.04] 3.032 [77.01] 2.900 [73.66] .106 [2.69] 2.806 [71.27] 7-103166-8
3.212 [81.58] 3.132 [79.55] 3.000 [76.20] .106 [2.69] 2.906 [73.81] 7-103166-9
3.312 [84.12] 3.232 [82.09] 3.100 [78.74] .106 [2.69] 3.006 [76.35] 8-103166-0
3.412 [86.66] 3.332 [84.63] 3.200 [81.28] .106 [2.69] 3.106 [78.89] 8-103166-1
3.512 [89.20] 3.432 [87.17] 3.300 [83.82] .106 [2.69] 3.206 [81.43] 8-103166-2
3.612 [91.74] 3.532 [89.71] 3.400 [86.36] .106 [2.69] 3.306 [83.97] 8-103166-3
3.712 [94.28] 3.632 [92.25] 3.500 [88.90] .106 [2.69] 3.406 [86.51] 8-103166-4
3.812 [96.82] 3.732 [94.79] 3.600 [91.44] .106 [2.69] 3.506 [89.05] 8-103166-5
6-102617-4
6-102617-5
6-102617-6
6-102617-7
6-102617-8
6-102617-9
7-102617-0
7-102617-1
7-102617-2
7-102617-3
7-102617-4
7-102617-5
7-102617-6
7-102617-7
7-102617-8
7-102617-9
8-102617-0
8-102617-1
8-102617-2
8-102617-3
8-102617-4
8-102617-5
6-87579-3
6-87579-4
6-87579-5
6-87579-6
6-87579-7
6-87579-8
6-87579-9
7-87579-0
7-87579-1
7-87579-2
7-87579-3
7-87579-4
7-87579-5
7-87579-6
7-87579-7
7-87579-8
7-87579-9
8-87579-0
8-87579-1
8-87579-2
8-87579-3
8-87579-4
5
Note: All part numbers are RoHS compliant.
123
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.040
[1.02]
(3 Plc.)
.025 [0.64] Square
Right-Angle Post
(with Detent Windows)
B
.150
[3.81]
(2 Plc.)
.318
[8.08]
C
.289
[7.34]
.200
[5.08]
.100
[2.54]
Ref.
Typ.
(Contact Area)
.100
[2.54]
.400
[10.16]
.280
[7.11]
.135
[3.43]
.013
[0.33]
(Standoffs)
.090
[2.29]
(2 Plc.)
A
Material and Finish
.157
[3.99]
.100
[2.54]
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
.240
[6.10]
Typ.
E
D
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
.489
[12.42]
.639
[16.23]
.080
[2.03]
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
C
.100*
[2.54]
Typ.
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
.100*
[2.54]
.035 .003
[0.89 0.08]
Dia. Typ.
5
AMPMODU Wire-Applied
Receptacles — pages 216-219
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
Post Plating/Part Nos.
Technical Documents — page 276
No. of
Pos.
A
B
C
D
E
Plating A
Plating B
Plating C
See mating connector for applicable
product and application specifications.
8
.680 [17.27] .600 [15.24]
.780 [19.81] .700 [17.78]
.880 [22.35] .800 [20.32]
.980 [24.89] .900 [22.86]
1.080 [27.43] 1.000 [25.40]
1.180 [29.97] 1.100 [27.94]
1.280 [32.51] 1.200 [30.48]
.300 [7.62] .190 [4.83]
.400 [10.16] .290 [7.37]
.500 [12.70] .290 [7.37]
.600 [15.24] .390 [9.91]
.700 [17.78] .390 [9.91]
.800 [20.32] .490 [12.45]
—
—
—
—
—
—
5-103167-1
5-103167-2
5-103167-3
5-103167-4
5-103167-5
5-103167-6
5-102570-2
5-102570-3
5-102570-4
5-102570-5
5-102570-6
5-102570-7
5-102570-8
5-102570-9
6-102570-0
6-102570-1
6-102570-2
6-102570-3
5-87577-1
5-87577-2
5-87577-3
5-87577-4
5-87577-5
5-87577-6
5-87577-7
5-87577-8
5-87577-9
6-87577-0
6-87577-1
6-87577-2
10
12
14
16
18
20
22
24
26
28
30
.900 [22.86] .190 [4.83] .890 [22.61] 5-103167-7
1.380 [35.05] 1.300 [33.02] 1.000 [25.40] .190 [4.83] .990 [25.15] 5-103167-8
1.480 [37.59] 1.400 [35.56] 1.100 [27.94] .190 [4.83] 1.090 [27.69] 5-103167-9
1.580 [40.13] 1.500 [38.10] 1.200 [30.48] .190 [4.83] 1.190 [30.23] 6-103167-0
1.680 [42.67] 1.600 [40.64] 1.300 [33.02] .190 [4.83] 1.290 [32.77] 6-103167-1
1.780 [45.21] 1.700 [43.18] 1.400 [35.56] .190 [4.83] 1.390 [35.31] 6-103167-2
Note: All part numbers are RoHS compliant.
124
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
C
Post Plating/Part Nos.
No. of
Pos.
A
B
D
E
Plating A
Plating B
Plating C
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
1.880 [47.75] 1.800 [45.72] 1.500 [38.10] .190 [4.83] 1.490 [37.85]
1.980 [50.29] 1.900 [48.26] 1.600 [40.64] .190 [4.83] 1.590 [40.39]
6-103167-3
6-103167-4
6-103167-5
6-103167-6
6-103167-7
6-103167-8
6-103167-9
7-103167-0
7-103167-1
7-103167-2
7-103167-3
7-103167-4
7-103167-5
7-103167-6
7-103167-7
7-103167-8
7-103167-9
8-103167-0
8-103167-1
8-103167-2
8-103167-3
6-102570-4
6-102570-5
6-102570-6
6-102570-7
5-102570-1
6-102570-8
6-102570-9
7-102570-0
7-102570-1
7-102570-2
7-102570-3
7-102570-4
7-102570-5
7-102570-6
7-102570-7
7-102570-8
7-102570-9
8-102570-0
8-102570-1
8-102570-2
8-102570-3
6-87577-3
6-87577-4
6-87577-5
6-87577-6
6-87577-7
6-87577-8
6-87577-9
7-87577-0
7-87577-1
7-87577-2
7-87577-3
7-87577-4
7-87577-5
7-87577-6
7-87577-7
7-87577-8
7-87577-9
8-87577-0
8-87577-1
8-87577-2
8-87577-3
2.080 [52.83] 2.000 [50.80] 1.700 [43.18]
.190 [4.83] 1.690 [42.93]
2.180 [55.37] 2.100 [53.34] 1.800 [45.72] .190 [4.83] 1.790 [45.47]
2.280 [57.91] 2.200 [55.88] 1.900 [48.26] .190 [4.83] 1.890 [48.01]
2.380 [60.45] 2.300 [58.42] 2.000 [50.80] .190 [4.83] 1.990 [50.55]
2.480 [62.99] 2.400 [60.96] 2.100 [53.34] .190 [4.83] 2.090 [53.09]
2.580 [65.53] 2.500 [63.50] 2.200 [55.88] .190 [4.83] 2.190 [55.63]
2.680 [68.07] 2.600 [66.04] 2.300 [58.42] .190 [4.83] 2.290 [58.17]
2.780 [70.61] 2.700 [68.58] 2.400 [60.96] .190 [4.83] 2.390 [60.71]
2.880 [73.15] 2.800 [71.12] 2.500 [63.50] .190 [4.83] 2.490 [63.25]
2.980 [75.69] 2.900 [73.66] 2.600 [66.04] .190 [4.83] 2.590 [65.79]
3.080 [78.23] 3.000 [76.20] 2.700 [68.58] .190 [4.83] 2.690 [68.33]
3.180 [80.77] 3.100 [78.74] 2.800 [71.12]
.190 [4.83] 2.790 [70.87]
3.280 [83.31] 3.200 [81.28] 2.900 [73.66] .190 [4.83] 2.890 [73.41]
3.380 [85.85] 3.300 [83.82] 3.000 [76.20] .190 [4.83] 2.990 [75.95]
3.480 [88.39] 3.400 [86.36] 3.100 [78.74] .190 [4.83] 3.090 [78.49]
3.580 [90.93] 3.500 [88.90] 3.200 [81.28] .190 [4.83] 3.190 [81.03]
3.680 [93.47] 3.600 [91.44] 3.300 [83.82] .190 [4.83] 3.290 [83.57]
3.780 [96.01] 3.700 [93.98] 3.400 [86.36] .190 [4.83] 3.390 [86.11]
3.880 [98.55] 3.800 [96.52] 3.500 [88.90] .190 [4.83] 3.490 [88.65]
5
Note: All part numbers are RoHS compliant.
125
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Pin Protection
on 3 Sides)
.639
[16.23]
.489
[12.42]
.200
Ref.
[5.08]
(Contact Area)
.040
[1.02]
(2 Plc.)
B
C
.318
[8.08]
.289
[7.34]
.100
[2.54]
.066
[1.68]
(2 Plc.)
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
.100
[2.54]
Typ.
Posts — Phosphor bronze, plated as
.361
[9.17]
follows:
.125
[3.18]
.280
[7.11]
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
.090
[2.29]
(2 Plc.)
.157
[3.99]
A
.100
[2.54]
C
.100*
[2.54]
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
.100*
[2.54]
.035 .003
[0.89 0.08]
Dia. Typ.
Related Product Data
Mateable Connectors
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
5
AMPMODU Board Mount
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 216, 217
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
No. of
Pos.
Dimensions
Post Plating/Part Nos.
Plating B Plating C
A
B
C
Plating A
5-103164-1
5-103164-2
5-103164-3
5-103164-4
5-103164-5
5-103164-6
5-103164-7
5-103164-8
6-103164-0
6-103164-1
6-103164-3
6-103164-5
6-103164-8
7-103164-3
7-103164-4
—
6
.412 [10.46]
.512 [13.00]
.612 [15.54]
.712 [18.08]
.812 [20.62]
.912 [23.16]
1.012 [25.70]
1.112 [28.24]
1.312 [33.32]
1.412 [35.86]
1.612 [40.94]
1.812 [46.02]
2.112 [53.64]
2.612 [66.34]
2.712 [68.88]
2.812 [71.42]
3.112 [79.04]
.332 [8.43]
.200 [5.08]
.300 [7.62]
5-102055-2
5-102055-3
5-102055-4
5-102055-5
5-102055-6
5-102055-7
5-102055-8
5-102055-1
6-102055-0
—
8-87572-5
5-87572-1
5-87572-2
5-87572-3
5-87572-4
5-87572-5
5-87572-6
5-87572-7
—
8
.432 [10.97]
.532 [13.51]
.632 [16.05]
.732 [18.59]
.832 [21.13]
.932 [23.67]
1.032 [26.21]
1.232 [31.29]
1.332 [33.83]
1.532 [38.91]
1.732 [43.99]
2.032 [51.61]
2.532 [64.31]
2.632 [66.85]
2.732 [69.36]
3.032 [77.01]
10
12
14
16
18
20
24
26
30
34
40
50
52
54
60
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.900 [73.66]
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
6-87572-0
—
6-102055-3
6-102055-5
6-102055-8
7-102055-3
—
6-87572-4
6-87572-7
7-87572-2
—
7-102055-5
7-102055-8
—
7-103164-8
7-87572-7
Note: All part numbers are RoHS compliant.
126
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Pin Protection
on 3 Sides)
.639
[16.23]
.489
[12.42]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.200
[5.08]
Contact Area)
Ref.
.040
[1.02]
(2 Plc.)
B
C
.318
[8.08]
.289
[7.34]
.150
[3.81]
(2 Plc.)
.361
[9.17]
.100
[2.54]
Typ.
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
.361
[9.17]
.280
[7.11]
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
tin on solder area, with entire post
underplated .000050 [0.00127] nickel
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
.090
[2.29]
(2 Plc.)
.100
[2.54]
.157
[3.99]
A
.125
[3.18]
.100
[2.54]
.100*
[2.54]
Typ.
Related Product Data
Mateable Connectors
AMPMODU Wire-Applied
Receptacles — pages 216, 217
C
.100*
[2.54]
5
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
No. of
Pos.
Dimensions
Post Plating/Part Nos.
Plating B Plating C
A
B
C
Plating A
10
12
14
16
18
20
24
26
30
34
40
50
60
.780 [19.81]
.700 [17.78]
.400 [10.16]
5-103165-1
5-102620-1
5-87568-1
5-87568-2
5-87568-3
5-87568-4
5-87568-5
5-87568-6
—
.880 [22.35]
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.280 [32.51]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.980 [50.29]
2.280 [57.91]
2.780 [70.61]
3.280 [83.31]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.700 [68.58]
3.200 [81.28]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
5-103165-2
5-103165-3
5-103165-4
5-103165-5
5-103165-6
5-103165-8
5-103165-9
6-103165-1
6-103165-3
6-103165-6
7-103165-1
7-103165-6
5-102620-2
5-102620-3
5-102620-4
5-102620-5
5-102620-6
5-102620-8
5-102620-9
6-102620-1
6-102620-3
6-102620-6
7-102620-1
7-102620-6
5-87568-9
—
6-87568-3
6-87568-6
7-87568-1
7-87568-6
Note: All part numbers are RoHS compliant.
127
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Right-Angle Post
(with Plastic Holddowns)
.639
[16.23]
.489
[12.42]
.200
[5.08]
Ref.
.040
[1.02]
(2 Plc.)
(Contact Area)
B
.150
[3.81]
(2 Plc.)
.289
[7.34]
.318
[8.08]
C
.100
[2.54]
Typ.
.100
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
[2.54]
.400
[10.16]
.280
[7.11]
Posts — Phosphor bronze, duplex
plated .000015 [0.00038] gold on
contact area, .000100-.000200
[0.00254-0.00508] tin on solder area,
with entire post underplated .000050
[0.00127] nickel
.135
[3.43]
.090
[2.29]
(2 Plc.)
.015
[.020]
.050
[1.27]
(2 Plc.)
.451
[11.46]
0.38
A
.180
[4.57]
[[0.51]]
.100
(Standoffs)
[2.54]
Related Product Data
Mateable Connectors
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
.140
[3.56]
(2 Plc.)
C
.100*
[2.54]
.100
[2.54]
Typ.
AMPMODU Wire-Applied
Receptacles — pages 216-219
.003
.040
[1.02
.451
[11.46]
Dia. Typ.
0.08
]
5
+.004
Technical Documents — page 276
.093
Dia.
-.000
+0.10
-.000
.09
2.36
2.36
See mating connector for applicable
product and application specifications.
[
]
(2 Plc.)
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
No. of
Pos.
Part Nos.
A
B
C
10
12
14
16
20
30
34
40
48
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.080 [27.43]
1.280 [32.51]
1.780 [45.21]
1.980 [50.29]
2.280 [57.91]
2.680 [68.07]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.600 [66.04]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.900 [20.86]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.300 [58.42]
5-104319-7
5-104319-8
5-104319-5
5-104319-1
5-104319-2
5-104319-3
5-104319-6
5-104319-4
5-104319-9
Note: All part numbers are RoHS compliant.
128
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded, with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.352
[8.94]
Typ.
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
.200
[5.08]
(Contact Area)
Ref.
.150
[3.81]
Typ.
.220
[5.59]
Typ.
.062
[1.57]
Typ.
R
.090
[2.29]
.100
[2.54]
.280
[7.11]
.400
[10.16]
.090
[2.29]
Typ.
.100
[2.54]
.318
[8.08]
.125
[3.18]
Typ.
C
B
.047
[1.19]
(2 Plc.)
D
E
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
A
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
F
.080
[2.03]
Typ.
.440
[11.18]
Related Product Data
Mateable Connectors
AMPMODU Wire-Applied
Receptacles — pages 216-219
.090
[2.29]
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
.240
[6.10]
Typ.
G
Accessories
Barrier Insert — page 204
D
.352
[8.94]
.100*
[2.54]
Typ.
.100*
[2.54]
.125
[3.18]
Dia. Typ.
Technical Documents — page 276
5
See mating connector for applicable
product and application specifications.
.050
Typ.
[1.27]
C
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
D
No. of
Pos.
Part Nos.
A
B
C
E
F
G
10
14
20
24
26
34
40
50
60
.780 [19.81]
.980 [24.89]
.700 [17.78] .400 [10.16] 1.104 [28.04] 1.304 [33.12]
.900 [22.86] .600 [15.24] 1.304 [33.12] 1.504 [38.20]
.290 [7.37]
.190 [4.83]
.190 [4.83]
—
87474-1
87474-9
87474-2
1-87474-3
87474-3
87474-4
87474-6
87474-7
2-87474-6
—
1.280 [32.51] 1.200 [30.48] .900 [22.86] 1.604 [40.74] 1.804 [45.82]
1.480 [37.59] 1.400 [35.56] 1.100 [27.94] 1.804 [45.82] 2.004 [50.90]
1.580 [40.13] 1.500 [38.10] 1.200 [30.48] 1.904 [48.36] 2.104 [53.44]
1.980 [50.29] 1.900 [48.26] 1.600 [40.64] 2.304 [58.52] 2.504 [63.60]
2.280 [57.91] 2.200 [55.88] 1.900 [48.26] 2.604 [66.14] 2.804 [71.22]
2.780 [70.61] 2.700 [68.58] 2.400 [60.96] 3.104 [78.84] 3.304 [83.92]
3.280 [83.31] 3.200 [81.28] 2.900 [73.66] 3.604 [91.54] 3.804 [96.62]
.890 [22.61]
.190 [4.83] 1.090 [27.69]
.190 [4.83] 1.190 [30.23]
.190 [4.83] 1.590 [40.39]
.190 [4.83] 1.890 [48.01]
.190 [4.83] 2.390 [60.71]
.190 [4.83] 2.890 [73.41]
Note: All part numbers are RoHS compliant.
129
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded Bulkhead Type; with .066 [1.68] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
.090
[2.29]
Typ.
E
D
C
.352
[8.94]
Typ.
.220
[5.59]
.330
[8.38]
.047
[1.19]
Typ.
.318
[8.08]
.080
[2.03]
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.400
[10.16]
.280
[7.11]
.062
[1.57]
Typ.
.040
[1.02]
Typ.
R
.066**
[1.68]
.090
[2.29]
Typ.
Typ.
B
.200
[5.08]
Ref.
(Contact Area)
A
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
G
F
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
.530
[13.46]
.062
.880
[22.35]
[1.57]
Thick Panel
Related Product Data
Mateable Connectors
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
AMPMODU Wire-Applied
Receptacles — pages 216-219
.080
[2.03]
Typ.
.288
[7.32]
.240
[6.10]
Typ.
F
G
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
.235 .002
[5.97 0.05]
.002
[ 0.05]
D
.002
[ 0.05]
H
.440 .002
[11.18 0.05]
Accessories
5
Barrier Insert — page 204
.130-.135
[3.30-3.43]
Dia. Typ.
.005
[0.13]
Technical Documents — page 276
R Max.
(4 Corners)
See mating connector for applicable
product and application specifications.
Recommended Panel Cutout
**Both mating faces have same end dimension.
Dimensions
No. of
Part Nos.
Pos.
A
B
C
D
E
F
G
H
10
12
20
24
26
34
40
50
60
.612 [15.54]
.712 [18.08]
1.112 [28.24]
1.312 [33.32]
1.412 [35.86]
1.812 [46.02]
2.112 [53.64]
2.612 [66.34]
3.112 [79.04]
.532 [13.51]
.632 [16.05]
1.032 [26.21]
1.232 [31.29]
1.332 [33.83]
1.732 [43.99]
2.032 [51.61]
2.532 [64.31]
3.032 [77.01]
.400 [10.16]
1.104 [28.04]
1.204 [30.58]
1.604 [40.74]
1.804 [45.82]
1.904 [48.36]
2.304 [58.52]
2.604 [66.14]
3.104 [78.84]
3.604 [91.54]
1.304 [33.12]
1.404 [35.66]
1.804 [45.82]
2.004 [50.90]
2.104 [53.44]
2.504 [63.60]
2.804 [71.22]
3.304 [83.92]
3.804 [96.62]
.206 [5.23]
.206 [5.23]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
—
—
.632 [16.05]
.732 [18.59]
1.132 [28.75]
1.332 [33.83]
1.432 [36.37]
1.832 [46.53]
2.132 [54.15]
2.632 [66.85]
3.132 [79.55]
87608-1
87608-2
.500 [12.70]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
.806 [20.47]
1.006 [25.55]
1.106 [28.09]
1.506 [38.25]
1.806 [45.87]
2.306 [58.57]
2.806 [71.27]
87608-6
87608-8
87608-9
1-87608-3
1-87608-6
2-87608-1
2-87608-6
Note: All part numbers are RoHS compliant.
130
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Profile Headers—Shrouded Bulkhead Type; with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.090
[2.29]
Typ.
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
D
C
.352
[8.94]
Typ.
.220
[5.59]
.330
[8.38]
.047
[1.19]
Typ.
.318
[8.08]
.080
[2.03]
Typ.
.100
[2.54]
.100
[2.54]
Typ.
.400
[10.16]
.280
[7.11]
.062
[1.57]
Typ.
.040
[1.02]
Typ.
R
.150**
[3.81]
.090
[2.29]
Typ.
Typ.
B
.200
[5.08]
Ref.
(Contact Area)
A
G
Material and Finish
F
Housing — Black thermoplastic,
94V-0 rated
.530
[13.46]
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
.062
[1.57]
Thick Panel
.880
[22.35]
Related Product Data
Mateable Connectors
.288
[7.32]
.080
[2.03]
Typ.
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
AMPMODU Wire-Applied
Receptacles — pages 216-219
.240
[6.10]
Typ.
F
G
.235 .002
[5.97 0.05]
.002
0.05]
D
[
.002
0.05]
H
[
.440 .002
[11.18 0.05]
Accessories
Barrier Insert — page 204
5
.130-.135
[3.30-3.43]
Dia. Typ.
.005
[0.13]
R Max.
Technical Documents — page 276
(4 Corners)
See mating connector for applicable
product and application specifications.
Recommended Panel Cutout
**Both mating faces have same end dimension.
Dimensions
No. of
Pos.
Part Nos.
A
B
C
D
E
F
G
H
10
20
24
26
30
32
34
40
50
60
.780 [19.81]
1.280 [32.51]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.880 [47.75]
1.980 [50.29]
2.280 [57.91]
2.780 [70.61]
3.280 [83.31]
.700 [17.78]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.200 [55.88]
2.700 [68.58]
3.200 [81.28]
.400 [10.16]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
1.104 [28.04]
1.604 [40.74]
1.804 [45.82]
1.904 [48.36]
2.104 [53.44]
2.204 [55.98]
2.304 [58.52]
2.604 [66.14]
3.104 [78.84]
3.604 [91.54]
1.304 [33.12]
1.804 [45.82]
2.004 [50.90]
2.104 [53.44]
2.304 [58.52]
2.404 [61.06]
2.504 [63.60]
2.804 [71.22]
3.304 [83.92]
3.804 [96.62]
.290 [7.37]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
—
.800 [20.32]
1.300 [33.02]
1.500 [38.10]
1.600 [40.64]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
87605-1
87605-6
.890 [22.61]
1.090 [27.69]
1.190 [30.23]
1.390 [35.31]
1.490 [37.85]
1.590 [40.39]
1.890 [48.01]
2.390 [60.71]
2.890 [73.41]
87605-8
87605-9
1-87605-1
1-87605-2
1-87605-3
1-87605-6
2-87605-1
2-87605-6
Note: All part numbers are RoHS compliant.
131
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Standard Profile Headers—Shrouded Bulkhead Type; with .066/.150 [1.68/3.81]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline
.200
Ref.
.025 [0.64] Square
Straight Post (with
Detent Windows and
Mounting Ears)
[5.08]
(Contact Area)
E
D
.880
[22.35]
.352
[8.94]
Typ.
.220
[5.59]
.047
[1.19]
Typ.
C
.080
[2.03]
.100
[2.54]
.400
[10.16]
.280
[7.11]
.090
[2.29]
Typ.
.062
[1.57]
Typ.
R
.150
[3.81]
Typ.
.318
[8.08]
.330
[8.38]
.040
[1.02]
B
Typ.
.090
[2.29]
Typ.
A
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
.080
[2.03]
Typ.
G
F
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
.289
[7.34]
Related Product Data
Mateable Connectors with
.066 [1.68] End Dimension —
AMPMODU Board Mount
.062
[1.57]
Receptacles — pages 176, 179, 180
Thick Panel
.240
[6.10]
Typ.
AMPMODU Wire-Applied
Receptacles — pages 216-219
AMPMODU MTE Receptacles —
pages 228, 229, 234
AMPMODU MT Receptacles —
pages 256, 257
H
J
K
L
.040
[1.02]
Typ.
.066
[1.68]
Typ.
.062
[1.57]
Typ.
R
Mateable Connectors with
.150 [3.81] End Dimension —
AMPMODU MTE Receptacles —
pages 232, 233, 235 (used with
coupling shroud on page 241)
5
.400
[10.16]
.080
.047
[1.19]
Typ.
.220
[5.59]
.352
[8.94]
Typ.
[2.03]
Accessories
C
Barrier Insert — page 204
D
E
Technical Documents — page 276
See mating connector for applicable
product and application specifications.
.002
0.05]
D
[
.235 .002
[5.97 0.05]
.002
0.05]
M
[
.440 .002
[11.18 0.05]
.130-.135
[3.30-3.43]
Dia. Typ.
.005
[0.13]
R Max.
(4 Corners)
Recommended Panel Cutout
132
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Standard Profile Headers—Shrouded Bulkhead Type; with .066/.150 [1.68/3.81]
End Dimension, Double-Row, .100 x .100 [2.54 x 2.45] Centerline (Continued)
Dimensions
No. of
Pos.
Part Nos.
A
B
C
D
E
F
10
20
24
26
30
34
40
50
60
.780 [19.81]
1.280 [32.51]
1.480 [37.59]
1.580 [40.13]
1.780 [45.21]
1.980 [50.29]
2.280 [57.91]
2.780 [70.61]
3.280 [83.31]
.700 [17.78]
1.200 [30.48]
1.400 [35.56]
1.500 [38.10]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.700 [68.58]
3.200 [81.38]
.400 [10.16]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
1.104 [28.04]
1.604 [40.74]
1.804 [45.82]
1.904 [48.36]
2.104 [53.44]
2.304 [58.52]
2.604 [66.14]
3.304 [83.92]
3.604 [91.54]
1.304 [33.12]
1.804 [45.82]
2.004 [50.90]
2.104 [53.44]
2.304 [58.52]
2.504 [63.60]
2.804 [71.22]
3.304 [83.92]
3.804 [96.62]
.290 [7.37]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
87496-2
87496-7
87496-9
1-87496-0
1-87496-2
1-87496-4
1-87496-7
87496-1
2-87496-6
Dimensions
No. of
Pos.
Part Nos.
G
H
J
K
L
M
10
20
24
26
30
34
40
50
60
—
.206 [5.23]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
—
.612 [15.54]
1.112 [28.24]
1.312 [33.32]
1.412 [35.86]
1.612 [40.94]
1.812 [46.02]
2.112 [53.64]
2.612 [66.34]
3.112 [79.04]
.532 [13.51]
1.032 [26.21]
1.232 [31.29]
1.332 [33.83]
1.532 [38.91]
1.732 [43.99]
2.032 [51.61]
2.532 [64.31]
3.032 [77.01]
.632 [16.05]
1.132 [28.75]
1.332 [33.83]
1.432 [36.37]
1.632 [41.45]
1.832 [46.53]
2.132 [54.15]
2.632 [66.85]
3.132 [79.55]
87496-2
87496-7
87496-9
1-87496-0
1-87496-2
1-87496-4
1-87496-7
87496-1
.890 [22.61]
1.090 [27.69]
1.190 [30.23]
1.390 [35.31]
1.590 [40.39]
1.890 [48.01]
2.390 [60.71]
2.890 [73.41]
.806 [20.47]
1.006 [25.55]
1.106 [28.09]
1.306 [33.17]
1.506 [38.25]
1.806 [45.87]
2.306 [58.57]
2.806 [71.27]
2-87496-6
5
Note: All part numbers are RoHS compliant.
133
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers––Shrouded
Product Facts
I Available in selected
positions 10 thru 60
I Flame retardant,
thermoplastic housings,
94V-0 rated
I Vertical and right-angle
versions available in double
row configurations
I Available in .025 [0.64]
square drawn wire posts
I Wash out clearance for flux
removal
I Mates with AMP-LATCH
Ribbon Cable Connectors
I Available with and without
eject latches
I Available with and without
kinked soldertails for PCB
retention
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
R
Performance
I Certified by Canadian
Standards
Characteristics
R
Association,
File No. LR 7189
Electrical
Insulation Resistance — 5,000
megohms minimum initial
Dielectric Withstanding Voltage —
1,000 V rms at sea level
5
Environmental
Operating Temperature —
-65°C to +105°C
Current — 1 ampere maximum
per contact
134
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post
A
.045
[1.14]
(2 Plc.)
B
.002
.075
[1.91
.165
[4.19]
(2 Plc.)
0.05
]
.360
[9.14]
.015
.010
Material and Finish
Housing — Glass-filled nylon, black,
94V-0 rated
.130
[3.30]
.001
.025
[0.64
.100
[2.54]
0.38
0.03
]
[0.25]
Typ.
Posts — Copper alloy, plated as follows:
Plating A — Gold flash over .000030
[0.00076] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
Plating B — Gold flash over .000015
[0.00038] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
.200
[5.08]
(Contact
Area)
.040
.035
1.02
[0.89]
.385
[9.78]
.015
.120
[3.05
0.38
]
.240
[6.10]
.020
.015
0.51
.100
[2.54]
[0.38]
.185
[4.70]
.010
0.25
.185
[4.70
Typ.
]
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
.100 .003*
[2.54 0.08]
Typ.
5
AMPMODU Board Mount
Receptacles — pages 179, 180
Short Point Wire-Applied
Connectors — page 224
.100 .003*
[2.54 0.08]
.040 .003
[1.02 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
Post Plating/Part Nos.
No. of
Pos.
A
B
Plating A
5103309-1
5103309-2
5103309-3
5103309-5
—
Plating B
10
14
16
20
24
26
34
40
50
60
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.400 [35.56]
1.600 [40.64]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
5103308-1
5103308-2
5103308-3
5103308-5
1-5103308-3
5103308-6
5103308-7
5103308-8
1-5103308-0
1-5103308-2
5103309-6
5103309-7
5103309-8
1-5103309-0
—
Note: All part numbers are RoHS compliant.
135
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.025 [0.64] Square
Right-Angle Post
Position No.1
Indicator
•
.385
[9.77]
.165
[4.19]
.025 .001
Typ.
[0.64 0.03]
Material and Finish
Housing — Glass-filled nylon, black,
94V-0 rated
A
.1975
[5.016]
B
.240
[6.09]
.045
[1.14]
(2 Plc.)
Typ.
Posts — Copper alloy, plated as follows:
+.008
-.005
+.203
-.127
.200
[5.08]
.153
(contact area)
Plating A — Gold flash over .000030
[0.00076] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
.130
[3.30]
3.88
[
]
.100
[2.54]
2 Plc.
.025 .001
[.635 0.03]
Typ.
.360
[9.14]
+.020
-.010
+0.51
-0.25
.135
Plating B — Gold flash over .000015
[0.00038] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
.130
[3.30]
3.42
[
]
.075 .002
[1.90 0.05]
.185 .010
[4.69 0.25]
Typ.
.010
[0.25]
.185
[4.69]
Typ.
.100
[2.54]
.123
[3.12]
Related Product Data
Electrical Characteristics —
page 134
.100 .003*
[2.54 0.08]
Typ.
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
Short Point Wire-Applied
Connectors — page 224
5
.100 .003*
[2.54 0.08]
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
B
Post Plating/Part Nos.
Plating A Plating B
No. of
Pos.
A
10
14
16
20
26
34
40
50
60
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.600 [40.64]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.200 [30.48]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
5103311-1
5103311-2
5103311-3
5103311-5
5103311-6
5103311-7
5103311-8
1-5103311-0
1-5103311-2
5103310-1
5103310-2
5103310-3
5103310-5
5103310-6
5103310-7
5103310-8
1-5103310-0
—
Note: All part numbers are RoHS compliant.
136
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline &
“Kinked” Soldertails for PCB Retention
.025 [0.64] Square
Straight Post (with Board
Retention Feature)
A
.045
[1.14]
+.008
.153
B
-.005
+0.20
- 0.13
.153
3.88
[
]
.15
.075 .002
[1.91 0.05]
(2 Plc.)
.165
[4.19]
(2 Plc.)
.365
[9.27]
Material and Finish
Housing — Glass-filled PPA, black,
94V-0 rated
.025
.020
.025 .001
[0.64 0.03]
Typ.
.140
[3.56]
0.64
[0.51]
.100
[2.54]
Posts — Copper alloy, plated with gold
flash over .000015 [0.00038] min.
palladium-nickel plate on the mating
surfaces, .000100 [0.00254] min. tin
plate on soldertails, with entire post
underplated .000050 [0.00127] min.
nickel
.200
(Contact Area)
[5.08]
.040
.035
1.02
[0.89]
.120 .015
[3.05 0.38]
.385
[9.78]
.240
[6.10]
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
.020
.015
0.51
.100
[2.54]
[0.38]
.185 .010
[4.69 0.25]
.185
[4.69]
AMPMODU Board Mount
Receptacles — pages 179, 180
.100 .003*
[2.54 0.08]
Typ.
Short Point Wire-Applied
Connectors — page 224
5
.100 .003*
[2.54 0.08]
*Reflow solder process compatible
.040 .003
[1.02 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
For Manual Insertion
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
A
Post Plating
Part Nos.
No. of
Pos.
B
10
14
16
20
24
34
40
50
60
.800 [20.32]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
5104338-1
5104338-2
5104338-3
5104338-4
5104338-5
5104338-7
5104338-8
5104338-9
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.400 [35.56]
2.000 [50.80]
2.300 [58.42]
2.800 [71.12]
3.300 [83.82]
1-5104338-0
Note: All part numbers are RoHS compliant.
137
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline &
“Kinked” Soldertails for PCB Retention (Continued)
Position No.1
Indicator
.025 [0.64] Square
Right-Angle Post (with
Board Retention Feature)
•
.385
[9.77]
.165
[4.19]
.025 .001
[0.64 0.03]
Typ.
A
B
.200
[5.08]
.240
[6.09]
+.008
-.005
+0.20
-0.13
.153
.045
[1.14]
.200
[5.08]
(contact area)
(2 Plc.)
Material and Finish
3.88
[
]
.130
Typ.
[3.30]
.100
[2.54]
2 Plc.
Housing — Glass-filled PPA, black,
94V-0 rated
.025 .001
[.635 0.03]
Typ.
.370
[9.40]
Posts — Copper alloy, plated with gold
flash over .000015 [0.00038] min.
palladium-nickel plate on the mating
surfaces, .000100 [0.00254] min. tin
plate on soldertails, with entire post
underplated .000050 [0.00127] min.
nickel
.025
.020
+.020
-.010
+0.51
-0.25
.125
0.64
[0.50]
3.18
[
]
.140
[3.56]
.075 .002
[1.90 0.05]
2 Plc.
.185 .010
[4.69 0.25]
Typ.
.185
[4.69]
Typ.
.100
[2.54]
.123
[3.12]
Related Product Data
.100 .003*
[2.54 0.08]
Electrical Characteristics —
page 134
Typ.
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
Short Point Wire-Applied
Connectors — page 224
.100 .003*
[2.54 0.08]
.040 .003
[1.02 0.08]
Dia. Typ.
5
Recommended PC Board Hole Layout
For Manual Insertion
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Dimensions
B
Post Plating
Part Nos.
No. of
Pos.
A
10
14
16
20
40
50
.800 [20.32]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
2.300 [58.42]
2.800 [71.12]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.900 [48.26]
2.400 [60.96]
5104340-1
5104340-2
5104340-3
5104340-4
5104340-8
5104340-9
Note: All part numbers are RoHS compliant.
138
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centers
.100
[2.54]
Straight-Thru, 4-Sided
.025 [0.64] Sq. Posts
.150
[3.81]
.165
.190
.240
.253
[6.43]
[4.19]
[4.83]
[6.10]
.025
[0.64]
.100
[2.54]
.336
.315
[8.53]
[8.00]
.150
[3.81]
.050
[1.27]
.107
[2.72]
.025
[0.64]
.289
A
[7.34]
E
Solder Tail
Typ.
B
C
Pin Header
with Latches
Position No.1
Indicator
.096
[2.44]
2 Plc.
.025
[0.64]
Dia.
•
.106
[2.74]
.549
[13.94]
Note: Used with Header (optional)
Latch (sold separately)
D
.195
[4.95]
Part Number 1825851-1
Pin Header
without Latches
Dimensions
C
No. of
Positions
Part Number
(Without Latches)
E
Material and Finish
A
B
D
.110 [2.79]
5102154-1
5102156-1
5102154-2
5102156-2
5102154-3
5102156-3
5102154-4
5102156-4
5102154-5
5102156-5
5102154-6
5102156-6
5102154-8
5102156-8
5102154-9
5102156-9
1-5102154-0
1-5102156-0
.700
1.100
1.260
.860
Housing & Latches — Black
10
17.78
27.94
32.00
21.84
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
thermoplastic, 94V-0 rated
.900
22.86
1.300
33.02
1.460
37.08
1.060
26.92
Contacts — Brass or phosphor bronze
(at TE’s option); Duplex .000030
[0.00076] gold on mating end, .000100
[0.00254] min. tin on termination end,
with entire contact underplated .000050
[0.00127] nickel
14
16
20
24
26
34
40
50
1.000
25.40
1.400
35.56
1.560
39.62
1.180
29.46
1.200
30.48
1.600
40.64
1.760
44.70
1.360
34.54
1.400
35.56
1.800
45.72
1.960
49.78
1.560
39.62
5
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
1.500
38.10
1.900
48.26
2.060
52.32
1.660
42.16
1.900
48.26
2.300
58.42
2.460
62.48
2.060
52.32
2.200
55.88
2.600
66.04
2.760
70.10
2.360
59.94
2.700
68.58
3.100
78.74
3.260
82.80
2.860
72.64
Mounting Information
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),
located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.
4-24 self-tapping screws
and 2-56 bolts and nuts are
available for mounting
straight-thru pin headers of
pc boards. Typical applica-
tions and part nos. for
Latch
(See Note at left.)
2-56
Bolt & Nut
(2 Each Req‘d.)
ordering this hardware are
presented below.
.256
[6.50]
4-24
Self-Tapping
Screw
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
(2 Req‘d.)
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
Note: All part numbers are RoHS
compliant.
139
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centers (Continued)
.100
[2.54]
.165
[4.19]
.025
[0.64]
Right-Angle, 4-Sided
.025 [0.64] Sq. Posts
Dia.
.038
[0.97]
E
Typ.
.100
[2.54]
.253
[6.43]
.190
[4.83]
.150
[3.81]
.240
[6.10]
.100
[2.54]
Solder Tail
.336
[8.53]
.315
[8.00]
.025
[0.64]
.107
[2.72]
.289
[7.34]
.050
[1.27]
.150
[3.81]
A
B
C
.025
[0.64]
Pos. No. 1 Indicator
Pin Header
with Latches
.096
[2.44]
.549
[13.94]
.108
[2.74]
Note: Used with Header (optional)
Latch (sold separately)
.195
[4.95]
Part Number 1825851-1
D
Dimensions
C
No. of
Positions
Part Number
(Without Latches)
Pin Header
without Latches
A
B
D
E
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
5102160-1
5102162-1
2-5102160-2*
2-5102162-2*
5102160-3
—
.700
1.100
1.260
.860
10
Material and Finish
Housing & Latches — Black
thermoplastic, 94V-0 rated
Contacts — Brass or phosphor bronze
(at TE’s option); Duplex .000030
[0.00076] gold on mating end, .000100
[0.00254] min. tin on
termination end, with entire contact
underplated .000050 [0.00127] nickel
17.78
27.94
32.00
21.84
.900
22.86
1.300
33.02
1.460
37.08
1.060
26.92
14
16
20
24
26
34
40
50
1.000
25.40
1.400
35.56
1.560
39.62
1.180
29.46
5102160-4
—
1.200
30.48
1.600
40.64
1.760
44.70
1.360
34.54
5102160-5
—
1.400
35.56
1.800
45.72
1.960
49.78
1.560
39.62
5
5102160-6
2-5102162-6*
5102160-8
5102162-8
5102160-9
—
1.500
38.10
1.900
48.26
2.060
52.32
1.660
42.16
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
1.900
48.26
2.300
58.42
2.460
62.48
2.060
52.32
2.200
55.88
2.600
66.04
2.760
70.10
2.360
59.94
1-5102160-0
1- 5102162-0
2.700
68.58
3.100
78.74
3.260
82.80
2.860
72.64
Mounting Information
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),
located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.
4-24 self-tapping screws
and 2-56 bolts and nuts are
available for mounting
straight-thru pin headers of
pc boards. Typical applica-
tions and part nos. for
*Blue housing.
Latch
(See Note at left.)
2-56
Bolt & Nut
(2 Each Req‘d.)
ordering this hardware are
presented below.
.256
[6.50]
4-24
Self-Tapping
Screw
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
(2 Req‘d.)
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
Note: All part numbers are RoHS
compliant.
140
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMPMODU Stacking Connectors—Shrouded,
.025 x .025 [0.64 x 0.64] Posts
Product Facts
I Parallel PC board stacking
without use of mother boards
I Provides space between
boards for interference-free
routing of wire-to-board
connections
I Two header heights
available: .785 [19.94] and
1.200 [30.48]
I Vertical mount headers are
fully shrouded
I Receptacle contacts have
dual cantilever beams with
built-in overstress protection
I .025 [0.64] sq. posts and
receptacle contacts on
double-row, .100 x .100
[2.54 x 2.54] centers
I Header posts and receptacle
contacts are phosphor
bronze, duplex plated
I Housings are made of
flame retardant, glass-filled
thermoplastic
AMPMODU stacking
connectors are a two-piece
interconnection system
designed for parallel
AMPMODU receptacle
contact design; dual
cantilever beams with built-
in overstress protection.
stacking printed circuit
boards, without the use of
mother boards.
Headers are available in
two heights: .785 [19.94]
and 1.200 [30.48]. This
allows the customer to
use the height of the header
to keep wire-to-board
connections up and
away from other board
components, particularly if
the components are densely
packaged around the
header.
5
Vertical mount headers and
receptacle assemblies
feature duplex plated posts
and receptacle contacts on
a double-row, .100 x .100
[2.54 x 2.54] grid. The .025
[ 0.64] sq. header posts are
more protected, and the
top-entry receptacle
contacts utilize the proven
141
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
AMPMODU Interconnection System
Receptacle Assemblies, Double-Row Board Mounted
Vertical Mount, Top Entry,
High Profile, Selectively
Loaded (with Standoffs)
A
.050
[1.27]
B
.100
[2.54]
.100
[2.54]
.238
[6.05]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Post Entry
Contacts — Phosphor bronze, plated
.000010 [0.000254] min. gold on mating
area, .000150-.000300 [0.00381-
0.00762] matte tin on solder area, with
entire contact underplated .000050-
.000100 [0.00127-0.00254] nickel
.175
[4.45]
.025
[0.64]
.320
[8.13]
.020
[0.51]
(Standoffs)
.100
[2.54]
.115
[2.92]
B
.100*
[2.54]
Typ.
.035 .003
[0.89 0.08]
Dia.
.100*
[2.54]
Recommended PC Board Hole Layout
.003 [
*
0.08] tolerances not to accumulate
5
within one connector pattern.
Receptacle
Assembly
Part No.
Dimensions
No. of
Pos.
A
B
48*
2.400 [60.96]
3.000 [76.2]
2.300 [58.42]
5-102766-1
5-102766-4
(40 Active)
60*
(52 Active)
2.900 [73.66]
*In addition to the active positions, each receptacle has four cavities on each
end that are not loaded with contacts. These empty cavities aid in aligning
the receptacle with header posts during mating.
Notes: 1. Part no. and date code stamped on housing where size permits.
Notes: 2. These receptacle assemblies mate with headers of the same
size as the active positions listed above. Refer to pages 143 and
144.
Note: All part numbers are RoHS compliant.
142
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Headers, Double-Row, .785 [19.94] Height
.025 x .025 [0.64 x 0.64]
Straight Post (with
Pin Protection)
.320
[8.13]
.090
[2.29]
.124
[3.15]
.100
[2.54]
Typ.
.348
[8.84]
.100
[2.54]
Material and Finish
Housing — Glass-filled thermoplastic,
A
B
black, 94V-0 rated
Contacts — Phosphor bronze, plated
.000015 [0.000381] min. gold on mating
area, .000100-.000200 [0.00254-
0.00508] matte tin on solder area, with
entire post underplated .000050
[0.00127] nickel
.025
[0.64]
Sq. Posts
.250
[3.81]
.103
[2.62]
C
.103
.070
[1.78]
Dia.
[2.62]
(at Surface)
.380
[9.65]
Min.
.340
[8.64]
.450
[11.43]
.785
[19.94]
.099
Dia.
.275
[6.99]
[2.51]
(at .340
[8.64] Depth)
.025
[0.64]
Sq. Posts
.265
[6.73]
.084
[2.13]
D
.268
[6.81]
5
B
.250 .003
[3.81 0.08]
.050 .003
[1.27 0.08]
.100*
[2.54]
Typ.
.043 .005
[1.09 0.13]
Dia.
.125
[3.18]
Dia.
.100*
[2.54]
C
Recommended PC Board Hole Layout
* .003 [ 0.08] tolerances not to accumu-
late within one connector pattern.
Dimensions
No. of
Pos.
Header
Part No.
A
B
C
D
40
52
2.720 [69.09]
3.320 [84.33]
2.400 [60.96]
3.000 [76.2]
1.900 [48.26]
2.500 [63.5]
2.430 [61.27]
3.030 [76.96]
5-102871-2
5-102871-1
Note: These headers mate with receptacle assemblies having the same number of active positions. See page 142.
Note: All part numbers are RoHS compliant.
143
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Headers, Double-Row, 1.200 [30.48] Height
.025 x .025 [0.64 x 0.64]
Straight Post (with
Pin Protection)
.320
.090
.124
[3.15]
[8.13]
[2.29]
.100
[2.54]
Typ.
.348
[8.84]
.100
[2.54]
Material and Finish
A
B
Housing — Glass-filled thermoplastic,
.250
[6.35]
black, 94V-0 rated
Contacts — Phosphor bronze, plated
.000015 [0.000381] min. gold on mating
area, .000100-.000200 [0.00254-
0.00508] matte tin on solder area, with
entire post underplated .000050
[0.00127] nickel
.025
[0.64]
Sq. Posts
.098
[2.49]
C
.077
.250
[6.35]
Dia.
.040
[1.02]
[1.96]
(at Surface)
.340
.350
[8.89]
Min.
[8.64]
.865
[21.97]
1.200
[30.48]
.073
[1.85]
Dia.
.060
[1.52]
(at .340 [8.64]
Depth)
.275
[6.99]
.084
[2.13]
.025
[0.64]
Sq. Posts
.265
[6.73]
.268
[6.81]
D
5
B
.250 .003
[3.81 0.08]
.100*
[2.54]
Typ.
.043 .005
[1.09 0.13]
.050 .003
[1.27 0.08]
.125
[3.18]
Dia.
.100*
[2.54]
C
Recommended PC Board Hole Layout
* .003 [ 0.08] tolerances not to accumu-
late within one connector pattern.
Dimensions
No. of
Pos.
Header
Part No.
A
B
C
D
52
3.320 [84.33]
3.000 [76.2]
2.500 [63.5]
3.030 [76.96]
5-102826-1
Note: This header mates with receptacle assembly having the same number of active positions. See page 142.
Note: All part numbers are RoHS compliant.
144
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
ACTION PIN Headers—Shrouded and Unshrouded
Product Facts
I Straight posted unshrouded
and shrouded versions
I .025 [0.64] square
ACTION PIN posts
I ACTION PIN posts make a
gas-tight, press-fit connec-
tion in plated-through holes
I Designed not to damage
plated-through holes
I Unshrouded headers
available in selected sizes
1 through 40 positions
(single-row) and 4 through
80 positions (double-row)
I Shrouded headers (double-
row) available in selected
sizes of 6 through 60
positions
I Flame retardant, black
thermoplastic housings,
94V-0 rated
I .100 [2.54] Centerline
spacing
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
I Certified by Canadian
Standards
R
Association,
File No. LR 16455
5
145
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
ACTION PIN Headers—Unshrouded, Single-Row,
.100 [2.54] Centerline
.050
[1.27]
Max.
.025 [0.64] Square
Straight Post
A
B
.092
[2.34]
.100
Typ.
[2.54]
.200
[5.08]
(Contact Area)
Ref.
.320
[8.13]
.090
[2.29]
.250
[6.35]
.042
[1.07]
Typ.
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
B
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
See page 168 for
hole dimensions
.100*
[2.54]
Recommended PC Board Hole Layout
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Part Nos.
Related Product Data
Dimensions
No. of
Pos.
For .062
[1.57]
Thick PC Boards
For .093-.125
[.236-3.18]
Thick PC Boards
A
B
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
ACTION PIN Posts — pages 150, 151
Application Tooling — page 152
1
.084 [2.13]
.184 [4.67]
.284 [7.21]
.384 [9.75]
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
—
8-103336-5
8-103336-4
9-103336-0
8-103336-6
8-103336-8
8-103336-7
8-103336-9
5-103336-1
5-103336-2
5-103336-3
5-103336-4
5-103336-5
5-103336-6
5-103336-7
5-103336-8
5-103336-9
6-103336-0
6-103336-1
6-103336-2
6-103336-3
—
8-102898-5
8-102898-4
9-102898-0
8-102898-6
8-102898-8
8-102898-7
8-102898-9
5-102898-1
5-102898-2
5-102898-3
5-102898-4
5-102898-5
5-102898-6
5-102898-7
5-102898-8
5-102898-9
6-102898-0
6-102898-1
6-102898-2
6-102898-3
6-102898-4
6-102898-5
6-102898-6
6-102898-7
6-102898-8
6-102898-9
7-102898-0
7-102898-1
7-102898-2
7-102898-3
7-102898-5
7-102898-9
8-102898-3
2
.100 [2.54]
.200 [5.08]
.300 [7.62]
3
4
5
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.100 [78.74]
3.500 [88.90]
3.900 [99.06]
6
Technical Documents — page 276
7
See mating connector for applicable
product and application specifications
8
9
5
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
36
40
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.93]
2.184 [55.47]
2.284 [58.01]
2.384 [60.55]
2.484 [63.09]
2.584 [65.63]
2.684 [68.17]
2.784 [70.71]
2.884 [73.25]
2.984 [75.79]
3.184 [80.87]
3.584 [91.03]
3.984 [101.19]
—
—
—
6-103336-8
—
—
—
—
7-103336-3
7-103336-5
7-103336-9
8-103336-3
Note: To insert header into PC board, use seating tool with arbor tool or air powered machine—page 152.
Note: All part numbers are RoHS compliant.
146
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
ACTION PIN Headers—Unshrouded, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.025 [0.64] Square
Straight Post
.050
[1.27]
Max.
A
B
.100
[2.54]
.100
Typ.
[2.54]
.200
Ref.
[5.08]
.320
[8.13]
(Contact Area)
.090
[2.29]
.250
[6.35]
.042
[1.07]
(2 Plc.)
.192
[4.88]
Material and Finish
Housing — Black thermoplastic, 94V-0
B
rated
.100*
[2.54]
.100*
[2.54]
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
See page 151 for
hole dimensions
Recommended PC Board Hole Layout
Related Product Data
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
ACTION PIN Posts — pages 150, 151
Application Tooling — page 152
Part Nos.
Dimensions
For .093-.125
[.236-3.18]
Thick
No. of
Pos.
For .062 [1.57]
Thick
PC Boards
A
B
Accessories
PC Boards
Barrier Insert — page 204
4
6
8
.184 [4.67]
.284 [7.21]
.384 [9.75]
.100 [2.54]
.200 [5.08]
.300 [7.62]
5-103542-1
5-103542-2
5-103542-3
5-103542-4
5-103542-5
5-103542-6
5-103542-7
5-103542-8
5-103542-9
6-103542-0
6-103542-1
6-103542-2
6-103542-3
6-103542-4
6-103542-5
6-103542-6
6-103542-7
6-103542-8
6-103542-9
7-103542-0
7-103542-2
7-103542-4
7-103542-9
8-103542-2
8-103542-9
5-103233-1
5-103233-2
5-103233-3
5-103233-4
5-103233-5
5-103233-6
5-103233-7
5-103233-8
5-103233-9
6-103233-0
6-103233-1
6-103233-2
6-103233-3
6-103233-4
6-103233-5
6-103233-6
6-103233-7
6-103233-8
6-103233-9
7-103233-0
—
5
Technical Documents — page 276
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
46
50
60
66
80
.484 [12.29]
.584 [14.83]
.684 [17.37]
.784 [19.91]
.884 [22.45]
.984 [24.99]
1.084 [27.53]
1.184 [30.07]
1.284 [32.61]
1.384 [35.15]
1.484 [37.69]
1.584 [40.23]
1.684 [42.77]
1.784 [45.31]
1.884 [47.85]
1.984 [50.39]
2.084 [52.39]
2.284 [58.01]
2.484 [63.09]
2.984 [75.79]
3.284 [83.41]
3.984 [101.19]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
2.900 [73.66]
3.200 [81.28]
3.900 [99.06]
See mating connector for applicable
product and application specifications
7-103233-4
7-103233-9
—
8-103233-9
Note: All part numbers are RoHS compliant.
147
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
ACTION PIN Headers—Shrouded with .066 [1.68] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.066
[1.68]
.025 [0.64] Square
.040
[1.02]
(3 Plc.)
Straight Post (with Detent
Windows, for .093-.125
[.236-3.18] Thick PC Board)
(2 Plc.)
B
C
.320
[8.13]
.200
[5.08]
(Contact Area)
.100
[2.54]
Ref.
.250
[6.35]
.100
Typ.
[2.54]
.400
[10.16]
.090
[2.29]
(2 Plc.)
.090
[2.29]
A
E
.240
[6.10]
(2 Plc.)
D
Material and Finish
.440
[11.18]
Housing — Black thermoplastic, 94V-0
rated
.085
[2.16]
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
B
.100*
[2.54]
.100*
[2.54]
Related Product Data
Mateable Connectors —
AMPMODU Board Mount
Receptacles — pages 176, 179, 180
See page 151 for
hole dimensions
AMPMODU Wire-Applied
Receptacles — pages 217-219
Recommended PC Board Hole Layout
AMPMODU MT Receptacles —
pages 256, 257
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
5
ACTION PIN Posts — pages 150, 151
Application Tooling — page 152
Dimensions
C
No. of
Header
Pos.
6
Part Nos.
5-102699-2
5-102699-3
5-102699-4
5-102699-5
5-102699-6
5-102699-7
5-102699-8
5-102699-9
6-102699-2
6-102699-4
6-102699-6
6-102699-9
7-102699-3
7-102699-8
A
B
D
E
.412 [10.46]
.512 [13.00]
.612 [15.54]
.712 [18.08]
.812 [20.62]
.912 [23.16]
1.012 [25.70]
1.112 [28.24]
1.412 [35.86]
1.612 [40.94]
1.812 [46.02]
2.112 [53.64]
2.612 [66.34]
3.112 [79.04]
.332 [8.43]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
.106 [2.69]
—
—
—
—
—
—
—
8
.432 [10.97]
.532 [13.51]
.632 [16.05]
.732 [18.59]
.832 [21.13]
.932 [23.67]
1.032 [26.21]
1.332 [33.83]
1.532 [38.91]
1.732 [43.99]
2.032 [51.61]
2.532 [64.31]
3.032 [77.01]
.106 [2.69]
.206 [5.23]
.206 [5.23]
.306 [7.77]
.306 [7.77]
.406 [10.31]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
.106 [2.69]
Accessories
Barrier Insert — page 204
10
12
14
16
18
20
26
30
34
40
50
60
Technical Documents — page 276
.806 [20.47]
1.106 [28.09]
1.306 [33.17]
1.506 [38.25]
1.806 [45.87]
2.306 [58.57]
2.806 [71.27]
See mating connector for applicable
product and application specifications
Note: All part numbers are RoHS compliant.
148
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
ACTION PIN Headers—Shrouded with .150 [3.81] End Dimension,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.150
[3.81]
(2 Plc.)
.025 [0.64] Square
.040
[1.02]
(3 Plc.)
Straight Post (with Detent
Windows, for .093-.125
[.236-3.18] Thick PC Board)
.250
[6.35]
B
C
.320
[8.13]
.200
[5.08]
(Contact Area)
.100
[2.54]
Ref.
.100
Typ.
[2.54]
.400
[10.16]
.090
[2.29]
(2 Plc.)
.090
[2.29]
A
E
.240
[6.10]
(2 Plc.)
D
.440
[11.18]
Material and Finish
.085
[2.16]
Housing — Black thermoplastic, 94V-0
rated
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
B
.100*
[2.54]
.100*
[2.54]
Related Product Data
See page 151 for
hole dimensions
Mateable Connectors —
AMPMODU MTE Receptacles —
Recommended PC Board Hole Layout
pages 232, 233
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
ACTION PIN Posts — pages 150, 151
Application Tooling — page 152
Dimensions
No. of
Header
Pos.
6
Part Nos.
A
B
C
D
E
—
—
—
—
—
—
—
5
Accessories
Barrier Insert — page 204
.580 [14.73]
.680 [17.27]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.080 [27.43] 1.000 [25.40]
1.180 [29.97] 1.100 [27.94]
1.280 [32.51] 1.200 [30.48]
1.480 [37.59] 1.400 [35.56]
1.580 [40.13] 1.500 [38.10]
1.780 [45.21] 1.700 [43.18]
1.980 [50.29] 1.900 [48.26]
2.280 [57.91] 2.200 [55.88]
2.780 [70.61] 2.700 [68.58]
3.280 [83.31] 3.200 [81.28]
.500 [8.43]
.600 [10.97]
.700 [17.78]
.800 [20.32]
.900 [22.86]
.200 [5.08]
.300 [7.62]
.190 [4.83]
.190 [4.83]
.290 [7.37]
.290 [7.37]
.390 [9.91]
.390 [9.91]
.490 [10.31]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
.190 [4.83]
6-102557-0
6-102557-1
5-102557-9
6-102557-2
6-102557-3
6-102557-4
6-102557-5
5-102557-2
6-102557-7
5-102557-3
5-102557-4
5-102557-5
5-102557-1
5-102557-6
5-102557-7
8
10
12
14
16
18
20
24
26
30
34
40
50
60
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
Technical Documents — page 276
See mating connector for applicable
product and application specifications
.890 [22.61]
1.090 [27.69]
1.190 [30.23]
1.390 [35.31]
1.590 [40.39]
1.890 [48.01]
2.390 [60.71]
2.890 [73.41]
Note: All part numbers are RoHS compliant.
149
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
ACTION PIN Press-Fit Posts
The Reliable Plated-Through Hole Interconnect
Solderless interconnections have been popular in electrical
and electronic applications with world-wide success for
decades. They provide reliable electrical and mechanical
stability and offer applied-cost savings across the board.
For PC board applications, compliant ACTION PIN posts
provide these features:
I Large gas-tight contact zone
I High reliability due to stored energy
I More resistant to damage to plated-through holes during
installation
I Especially suited for multilayer PC boards
I Less costly board manufacturing due to larger hole
tolerances compared to use of solid pins
I Application can be made by end-user
I Repairability—contact can be replaced in the same pin
location (two repairs)
Principle of the Compliant ACTION PIN Post
I Installation with no heat cycling of board
When a compliant ACTION PIN post is inserted into a
plated-through hole, two spring members are compressed,
exerting force against the hole for a gas-tight connection.
The diameter of the hole is smaller than the diagonal size of
the pin (see cross-section illustration below).
I Permits mass insertion by minimizing forces needed to
insert pins as compared to solid pin press-fit application
I Significant applied-cost savings in many applications
Since compliant ACTION PIN posts do not have to be
soldered, problems associated with solder are eliminated,
such as:
The beam characteristics of the pin are designed so that a
plastic, as well as an elastic, deformation takes place during
insertion. The two spring members compress to different
degrees to accommodate hole tolerances. The compliant
pin also reduces strain on the board. With a rigid pin, the
elastic strain energy is stored entirely in the board, leading
to damage of the plated-through holes. With the compliant
ACTION PIN post, the residual force of the elastic
deformation maintains stored energy to produce a tight
contact zone between the pin and the plated-through hole.
This maintains long-term electrical and mechanical
reliability of the interconnection.
I
Faulty solder joints
I
Solder fumes; contaminants are deposited on the
contacts
I
I
I
Solder spots; short circuits between printed circuits
Flux residuals
Thermal strain on printed circuit boards and
components
5
I
Degassing of plated-through holes
Solderless press-fit interconnections using compliant pins
are primarily integrated in, but not limited to, backplanes.
Solderless press-fit interconnections are used in racks,
especially where connectors must be fixed on the solder
side of the PC board and/or component side. In these
applications, the holes for ACTION PIN post connectors are
covered during the soldering process and press-fitting is
performed after soldering.
Other applications for ACTION PIN post interconnections
include PC boards that incorporate components using
surface mount technology (SMT). Here, too, press-fit
interconnections can be applied after soldering, thus
eliminating complications associated with connectors
suitable for surface mounting.
Minimum
Hole Dia.
.037 [0.94]
Maximum
Hole Dia.
.043 [1.09]
Cross-Section Area of ACTION PIN Press-Fit Post in Printed Circuit
Board Holes
150
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
ACTION PIN Press-Fit Posts (Continued)
ACTION PIN posts provide a more reliable press-fit
connection. Localized pressure in the interface area provides
oxide break-through and prevents corrosion better in many
of the harshest environments to help provide a reliable
connection. Also, radial and axial distortion are controlled to
meet today’s standards for multilayer board applications.
PC Board Thickness
ACTION PIN posts are
designed for use in a variety
of PC board thicknesses.
However, certain ACTION
PIN posts are to be used in
specific ranges of board
thicknesses. To promote
optimum
Annular Ring (See Note)
Drilled Hole
Copper Thickness
Tin-lead Thickness
Plated-Through Hole
5
performance, the
recommended board
thicknesses provided with
the connector being used
must be followed.
ACTION PIN Post/PC Board Applications
Plating Thicknesses
Distortion Specification*
ACTION PIN Contact
Material Thickness
Drilled Hole
Plated-Through
Diameter
Copper *
Tin-lead
Hole Diameter
Average
Maximum
.0453 .001 [1.151
]
.001-.003 [0.03-0.08] .0003 [0.008]Min.
.037-.043 [0.94-1.09]
.0015 [0.038]
.002 [0.05]
0.03
.025 [0.64]
*Maximum hardness of copper layer is 150 Knoop.
**Radial hole distortion.
Note: Recommended annular ring diameter is hole diameter plus .020 [0.51].
151
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Application Tooling for AMPMODU Headers with ACTION PIN Posts
Double-Row Connector
Seating Tools
Triple-Row Connector
Seating Tools
Header Size
(No. of Pos.) Assembly No.
96
Single-Row Connector
Seating Tools
ACTION PIN Post
Replacement Tooling
Header Size
Tool
Tool
Tooling Assembly No. 91171-1
is used to install single-row
AMPMODU headers with
ACTION PIN posts into
PC boards.
(No. of Pos.) Assembly No.
4
91170-1
91170-1
91169-8
91169-6
91169-7
91169-3
91169-2
91169-1
91169-5
91169-9
6
105
120
150
195
204
210
300
8
91170-2
12
14
16
20
24
30
36
40
50
60
80
96
100
120
140
200
91170-5
91170-6
Pin headers with
91170-7
ACTION PIN posts allow
high speed, solderless
back-plane construction
through press-fit applica-
tion. Press fitting connectors
to printed circuit boards
requires special seating
tools which transfer applica-
tion force directly to the
contacts.
91170-9
1-91170-1
1-91170-4
1-91170-7
1-91170-9
2-91170-4
2-91170-9
3-91170-2
3-91170-5
3-91170-6
3-91170-8
4-91170-0
4-91170-2
Rear Insertion/Extraction Tool
No. 265871-7 (Ref. 408-2636)
Includes:
Impact Tool No. 380392-8
Removal Tool No. 265964-1
Replacement Tip No. 308554-1
Force applied to the tool
to seat the connectors
can be provided by the TE
seating machines shown on
this page.
For tooling information,
call the TE Automation
Group 1-800-722-1111.
ASG Servo Electric Presses
TE offers a wide range of
servo-electric presses for
the application of press-fit
connectors. Systems are
available with varying force
capacity, board size capac-
ity and process capability.
Each system features real-
time force feedback and PC
control to allow the highest
level of control and trace-
ability. Every connector
pressed is monitored to con-
firm that maximum force is
not exceeded and minimum
force is met. Each system
controls force, height and
speed to allow termination
of the pressing cycle by
force or height parameters.
Complete SPC data is avail-
able as each connector
press cycle is monitored
and stored.
Please see the matrix
below and contact TE
5
Automation Group at 1-800-
722-1111 for assistance in
understanding which system
will best meet your needs.
BMEP 5T
Max Pressing Force
tons [kN]
Max Board Size (L x W)
in [mm]
Press Model
Description
Semi-automatic, benchtop
BMEP 3T
BMEP 5T
MEP 6T
3 [26.7]
5 [44.5]
6 [53.4]
18 x 24 [460 x 610]
18 x 24 [460 x 610]
24 x 36 [610 x 914]
servo-electric press
Semi-automatic, benchtop
servo-electric press
Semi-automatic, stand-alone
servo-electric press
Semi-automatic, stand-alone
servo-electric press
MEP 12T
AEP 12T
12 [106.8]
12 [106.8]
30 x 36 [ 762 x 914]
36 x 48 [914 x 1219]
AEP 6T
Automatic, inline
servo-electric press
Automatic, stand alone
servo-electric press
AEP 6T
6 [53.4]
30 x 36 [762 x 914]
Note: All part numbers are RoHS compliant.
152
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling for Post Insertion
TE offers a wide range of
application tooling solutions
ranging from stand alone
manual insertion systems
through fully automatic
inline systems. Please
contact your local TE repre-
sentative or the TE Tooling
Assistance Center at
Modular Insertion System Bench
Machine No. 217600-1
This machine uses TE insertion heads to install a variety of
printed circuit board products at rates of 2,000 per hour.
The printed circuit board is placed in a Board Holding
Fixture which is attached to a two-hand controlled mecha-
nism. The operator moves the board over the machine
anvil; a switch in the anvil actuates the machine when the
printed circuit board is placed on the anvil. A spotlight
illuminates the insertion area.
1-800-722-1111 for help in
finding the right solution to
meet your particular
Consult TE for further information on this machine and the
insertion heads.
requirements.
5
P300 and P350 Automatic Insertion Machines
The P300 and P350 are automatic insertion machines
for the application of reeled compliant pin and thru-hole
products. Systems are available as stand alone or fully
inline with SMEMA compatible conveyor system. Up to
3 different insertion heads can be mounted on a system
allowing one machine to apply up to 3 different products.
Insertion rates of up to 3 insertions per second on the P300
and up to 5 insertions per second on a P350 are possible
(application dependent). PCBs up to 15.5" x 23.5"
[400x600mm] on the P300 and up to 17.5" x 17.5"
[450x450mm] on the P350 can be processed by high
speed XY positioning tables. A wide range of options,
including force monitoring, PCB vision correct, and
PCB thickness measurement are available to meet your
performance and production flexibility requirements.
Note: All part numbers are RoHS compliant.
153
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
ACTION PIN Stacking Connector System
(Non-Intermateable with AMPMODU Connectors)
Product Facts
I Can stack multiple printed
circuit boards without the
need of a mother board
I Connect bus lines in the
shortest possible distance
I Receptacle assembly has
ACTION PIN posts for sol-
derless board mounting
I Can be mounted onto the
board simply by press
fitting with Mini-Press
I Receptacle assembly is
easy to service and replace
(up to 2 times)
I Receptacle contacts are
of fork design to mate with
posts at two points.
Virtually eliminates danger
of scooping at mating/
unmating
I Stacking dimensions are
13.4 [.528] or 19.0 [.748]
when using receptacle
assemblies together, and
13.9 [.547] or 19.5 [.768]
when using a combination
of receptacle and post
header assemblies
ACTION PIN Stacking
Connectors are a family of
two-piece connectors used to
stack multiple printed circuit
boards in parallel. They have
been developed to provide
a more reliable and
bus lines in the shortest
possible distance without
the need of a mother board,
thus permitting effective
utilization of space above
the board; compared with
other methods of jumper
connection using cable
connectors, they make the
overall board layout more
clean and straight for
sizes of 26, 30, 34, 40,
50 and 60 positions.
ACTION PIN Stacking
Connectors consist of a
receptacle assembly, a
mating post header and
a post hood to protect
the post portion of the
receptacle assembly.
I Accepts 1.6 [.062] thick
boards
economical means of
compact wiring and high-
density packaging inside a
variety of electronic
I Housing provided with
polarization to help prevent
mismating
5
A complete description
of the ACTION PIN
Stacking Connectors is
presented on the following
page (155).
equipment.
compact packaging.
I Housing made of chemical-
resistant glass-filled PBT,
black in color
The connectors have many
advanced features: they
can be used to connect
Contacts are on 2.54 x 2.54
[.100 x .100] grid. The
connectors are available in
I Contacts are of copper alloy
material with high spring
characteristics, gold-over-
nickel plated
I Post hood available to
protect the post portion of
receptacle contacts. Can be
selected depending on
stacking dimensions
I Connectors available in
sizes of 26, 30, 34, 40, 50
and 60 positions
I Product specification:
108-5197
154
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
ACTION PIN Stacking Connector System
(Non-Intermateable with AMPMODU Connectors) (Continued)
one is used with an outer-
most board and the other
with intermediary boards. A
solder version is also avail-
able for the outer board
mount assembly.
which an outer board mount
receptacle assembly is
applied. The post header is
preloaded with 0.50 [.022]
square soldering posts.
These posts are protected by
the side walls of the housing.
Receptacle Assembly
The receptacle assembly
features reliability and
economy characteristic of
this product line.
The mating portion of its
built-in receptacle contacts
is a fork design, highly
resilient and helps prevent
damage to contacts by
scooping at mating/
Post Hood
Stacking dimensions
provided by this connector
line are as follows:
When using the intermediary
board mount receptacle
assembly, this post hood is
used to protect the post
portion of the assembly. The receptacle and intermediary
post hood is available in two board receptacle
types: one with the housing
height of 10.0 [.394] and the
other with the housing height
of 15.7 [.618]. They can be
selected, depending on
stacking dimensions.
When the outer board
unmating.
On the board mount side of
the assembly are 0.55 [.022]
square ACTION PIN posts.
assemblies are used
13.4 [.528] or 19.0 [.748].
When the intermediary
board receptacle assembly
and the post header
assembly are used
13.9 [.547] or 19.5 [.768].
No soldering is required to
mount the assembly on the
board, the posts being simply,
press fit into the board’s
Post Header
0.825 [.032] diameter holes.
The post header is mounted
onto the outer board on the
other side of the board to
Two types of receptacle
assemblies are available;
Typical Application
PC Board
1.6
[.062]
thickness
Receptacle Assembly
(For outer board)
(ACTION PIN Type)
Part No.: 173145
5
Stacking Dim.
13.4 [.528], 19.0 [.748]
Receptacle + Receptacle
Post Hood
Part No.: 173144
PC Board
1.6
[.062]
thickness
Receptacle Assembly
(For inner board)
(ACTION PIN Type)
Part No.: 173145
Stacking Dim.
13.9 [.547], 19.5 [.768]
Receptacle + Post
Post Header
(Solder Type)
Part No.: 173146
PC Board
1.6
[.062]
thickness
Note: All part numbers are RoHS compliant.
155
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
Post Hood (Non-Intermateable with AMPMODU Connectors)
A
B
0.75
[.030]
Hole Dia.
2.54
[.100]
Pitch
X
X
Y
Y
8.9
[.350]
The post hood, mounted
onto the post of the
intermediary receptacle
assembly, protects the post
and serves as a header
assembly when stacking
several boards.
0.6*
[.024]
2.54
[.100]
Section X-X
Hole Dia.
*
10.0
[.394]
C
Material
Black glass-filled PBT, 94V-0 rated
SectionY-Y
Dimensions (See Note.)
B
Acceptable
Post Length
No. of
Pos.
Post Hood
Part Nos.
5
A
C
26
30
34
40
50
60
26
30
34
38.1 [1.500]
43.2 [1.700]
48.3 [1.900]
55.9 [2.200]
68.6 [2.700]
81.3 [3.200]
38.1 [1.500]
43.2 [1.700]
48.3 [1.900]
30.48 [1.200]
33.56 [1.321]
40.64 [1.600]
48.26 [1.900]
65.96 [2.597]
73.66 [2.900]
30.48 [1.200]
33.56 [1.321]
40.64 [1.600]
10.0 [.394]
10.0 [.394]
10.0 [.394]
10.0 [.394]
10.0 [.394]
10.0 [.394]
15.6 [.614]
15.6 [.614]
15.6 [.614]
1-173144-1
173144-2
1-173144-2
173144-3
173144-4
173144-5
1-173144-3
173144-7
1-173144-4
173144-8
3-173144-8*
173144-9
1-173144-0
For
8.9 [.350]
or
10.9 [.429]
(For Stacking Dimension)
13.4 [.528]
For
14.5 [.571]
or
16.5 [.650]
40
55.9 [2.200]
48.26 [1.900]
15.6 [.614]
(For Stacking Dimension)
50
60
68.6 [2.700]
81.3 [3.200]
65.96 [2.597]
73.66 [2.900]
15.6 [.614]
15.6 [.614]
19.0 [.748]
*0.60 [.024] dia. applies to 16 holes on both sides, except Part No. 3-173144-8.
Note: All part numbers are RoHS compliant.
156
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
Receptacle Assemblies with ACTION PIN Posts and Solder Posts
(Non-Intermateable with AMPMODU Connectors)
2.54
[.100]
A
Receptacle Assembly for
Outer Board (With 0.55
[.022] Square Post)
0.5
[.020]
Y
Y
7.6
[.300]
Blank
width
0.69**
[.027]
16.5
[.650]
Contact
Area
B
2.54
[.100]
Pitch
2.54
[.100]
6.4
[.252]
3.7
6.4
[.252]
3.7
[.146]
[.146]
X
Contact
Area
11.9
[.469]
0.5
[.020]
0.5
[.020]
ACTION
PIN
Area
Mating
Area
L
X
Material and Finish
2.54
[.100]
L
Housing — Black glass-filled PBT,
94V-0 rated
Contacts — Copper alloy, plated
0.00020 [.000008] gold on contact area
and post mating area, gold flash on
ACTION PIN tail or 0.000070 [.0000027]
tin on solder tail, with entire contact
underplated 0.00130 [.000050] nickel
2.54
[.100]
2.54
[.100]
Pitch
B
Section X-X
ACTION PIN
Type
Section X-X
Solder Type
SectionY-Y
Application Tooling shown on
page 162.
0.1
0.1
2.54
[.100
2.54
[.100
.004
.004
0.1
]
]
B[
.004]
Recommended PC Board Hole Layout
PC Board Mounting
Dimensions
For Outer Board
5
Thru hole
Land dia.
plating Copper
0.02500-0.05000
[.000984-.001968]
1.4
[.055]
Min.
Post
Receptacle
Dimensions (See Note.)
No. of
Pos.
Type
Length
L
Assembly
Part Nos.
Board
Thick
1.6
A
B
26
30
34
40
50
60
26
30
34
40
50
35.6 [1.402]
40.6 [1.598]
45.7 [1.799]
53.3 [2.098]
66.0 [2.598]
78.7 [3.098]
35.6 [1.402]
40.6 [1.598]
45.7 [1.799]
53.3 [2.098]
66.0 [2.598]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
48.26 [1.900]
60.96 [2.400]
73.66 [2.900]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
48.26 [1.900]
60.96 [2.400]
1-173145-7
173145-2
1-173145-8
173145-3
173145-4
173145-5
2-173145-8
2-173145-4
2-173145-9
2-173145-5
2-173145-6
2-173145-7
3-173145-0**
[.062]
ACTION PIN
Post
4.2*
4.2*
Finished
hole dia.
0.05
0.825
[.032
PCB drill hole
.002
]
0.025
0.9
.0001
[.035
]
Solder Post
ACTION PIN Post
60
78.7 [3.098]
73.66 [2.900]
Board
Thick
1.6
Finished
hole dia.
**After mounted receptacle assembly is on board, dimension of extrude length from board is 2.6 [.102].
**Post Length = 17.0 [.669] , Blank Width = 0.69 [.027] (see above figure) (finished hole dia. = 1.0 [.039]).
0.05
[.062]
0.8
[.031
.002
]
Solder Post
Note: All part numbers are RoHS compliant.
157
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
Receptacle Assemblies with ACTION PIN Posts
(Non-Intermateable with AMPMODU Connectors)
Receptacle Assembly for
Inner Board (With 0.55
[.022] Square Post)
2.54
[.100]
A
Y
Y
7.6
[.300]
B
2.54
[.100]
Pitch
3.7
6.4
[.252]
[.146]
X
Contact
Area
Material and Finish
11.9
[.469]
0.5
[.020]
Housing — Black glass-filled PBT,
94V-0 rated
Contacts — Copper alloy, plated
0.00020 [.000008] gold on contact area
and post mating area, gold flash on
ACTION PIN tail or 0.000070 [.0000027]
tin on solder tail, with entire contact
underplated 0.00130 [.000050] nickel
ACTION
PIN
Area
X
L
Mating
Area
2.54
[.100]
2.54
[.100]
Pitch
Application Tooling shown on
page 162.
B
Section X-X
SectionY-Y
PC Board Mounting
Dimensions
Thru hole
Land dia.
2.54 0.1
[.100 .004]
2.54 0.1
[.100 .004]
plating Copper
0.02500-0.05000
[.000984-.001968]
1.4
Min.
[.055]
0.1
.004]
Board
Thick
1.6
B
[
5
Recommended PC Board Hole Layout
[.062]
For Inner Board
Finished
hole dia.
Post
Length
L
Receptacle
Assembly
Part Nos.
Dimensions (See Note.)
Stacking
No. of
Pos.
0.05
0.825
Dimensions
A
B
PCB drill hole
.002
[.032
]
0.025
0.9
30
34
40.6 [1.598]
45.7 [1.799]
35.56 [1.400]
40.64 [1.600]
3-173145-2
3-173145-7
3-173145-3
3-173145-1*
3-173145-4
3-173145-5
1-173145-9
173145-7
.0001
[.035
]
8.9
.350
40
53.3 [2.098]
48.26 [1.900]
50
60
26
30
34
40
50
60
66.0 [2.598]
78.7 [3.098]
35.6 [1.402]
40.6 [1.598]
45.7 [1.799]
53.3 [2.098]
66.0 [2.598]
78.7 [3.098]
60.96 [2.400]
73.66 [2.900]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
48.26 [1.900]
60.96 [2.400]
73.66 [2.900]
13.4 [.528]
2-173145-0
173145-8
10.9
.429
173145-9
1-173145-0
*Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
Note: All part numbers are RoHS compliant.
158
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
Receptacle Assemblies with ACTION PIN Posts
(Non-Intermateable with AMPMODU Connectors) (Continued)
For Inner Board (Continued)
Post
Length
L
Receptacle
Assembly
Part Nos.
Dimensions (See Note.)
Stacking
Dimensions
No. of
Pos.
A
B
26
30
34
40
50
60
26
30
34
40
50
60
35.6 [1.402]
40.6 [1.598]
45.7 [1.799]
53.3 [2.098]
66.0 [2.598]
78.7 [3.098]
35.6 [1.402]
40.6 [1.598]
45.7 [1.799]
53.3 [2.098]
66.0 [2.598]
78.7 [3.098]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
48.26 [1.900]
60.96 [2.400]
73.66 [2.900]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
48.26 [1.900]
60.96 [2.400]
73.66 [2.900]
4-173145-2
3-173145-8
4-173145-3
3-173145-9
4-173145-0
4-173145-1
2-173145-1
1-173145-2
2-173145-2
1-173145-3
1-173145-4
1-173145-5
14.5 [.571]
16.5 [.650]
19.0 [.748]
*Contact area and post mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
5
Note: All part numbers are RoHS compliant.
159
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
Post Headers with Solder Posts
(Non-Intermateable with AMPMODU Connectors)
Post Header
(With 0.55 [.022] Square
Post)
A
B
2.54
2.54
[.100]
[.100]
Pitch
Y
Y
8.9
[.350]
X
X
Material and Finish
8.5
[.335]
Housing — Black glass-filled PBT,
94V-0 rated
Posts — Copper alloy, plated 0.00020
[.000008] gold on contact area,
0.000070 [.0000027] min. tin on solder
tail, with entire post underplated
0.00130 [.000050] nickel
L
C
0.5
[.020]
2.54
[.100]
Pitch
3.7
[.146]
B
Section X-X
SectionY-Y
PC Board Mounting
Dimensions
Board
Thick
1.6
Finished
hole dia.
0.06
0.8
[.062]
.002
[.031
]
2.54 0.1
[.100 .004]
2.54 0.1
[.100 .004]
0.1
.004]
B
[
Recommended PC Board Hole Layout
5
Post
Length
L
Part Nos. of
Post Header
Assembly
Dimensions (See Note.)
Stacking
Dimensions
No. of
Pos.
A
B
C
26
30
34
38.1 [1.500]
43.2 [1.700]
48.3 [1.900]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
10.5 [.413]
10.5 [.413]
10.5 [.413]
3-173146-5
3-173146-1
3-173146-6
3-173146-2
3-173146-0*
3-173146-3
3-173146-4
2-173146-1
1-173146-7
2-173146-2
1-173146-8
4-173146-3*
1-173146-9
2-173146-0
5.8 [.228]
7.8 [.307]
40
55.9 [2.200]
48.26 [1.900]
10.5 [.413]
50
60
26
30
34
68.6 [2.700]
81.3 [3.200]
38.1 [1.500]
43.2 [1.700]
48.3 [1.900]
60.96 [2.400]
73.66 [2.900]
30.48 [1.200]
35.56 [1.400]
40.64 [1.600]
10.5 [.413]
10.5 [.413]
10.5 [.413]
10.5 [.413]
10.5 [.413]
13.9 [.547]
40
55.9 [2.200]
48.26 [1.900]
10.5 [.413]
50
60
68.6 [2.700]
81.3 [3.200]
60.96 [2.400]
73.66 [2.900]
10.5 [.413]
10.5 [.413]
*Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
Note: All part numbers are RoHS compliant.
160
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
Post Headers with Solder Posts
(Non-Intermateable with AMPMODU Connectors) (Continued)
Post
Length
L
Part Nos. of
Post Header
Assembly
Dimensions (See Note.)
B
Stacking
Dimensions
No. of
Pos.
A
C
26
30
34
40
50
60
26
30
34
40
50
60
38.1 [1.500] 30.48 [1.200] 16.1 [.634]
43.2 [1.700] 35.56 [1.400] 16.1 [.634]
48.3 [1.900] 40.64 [1.600] 16.1 [.634]
55.9 [2.200] 48.26 [1.900] 16.1 [.634]
68.6 [2.700] 60.96 [2.400] 16.1 [.634]
81.3 [3.200] 73.66 [2.900] 16.1 [.634]
38.1 [1.500] 30.48 [1.200] 16.1 [.634]
43.2 [1.700] 35.56 [1.400] 16.1 [.634]
48.3 [1.900] 40.64 [1.600] 16.1 [.634]
55.9 [2.200] 48.26 [1.900] 16.1 [.634]
68.6 [2.700] 60.96 [2.400] 16.1 [.634]
81.3 [3.200] 73.66 [2.900] 16.1 [.634]
4-173146-1
3-173146-7
4-173146-2
3-173146-8
3-173146-9
4-173146-0
2-173146-8
2-173146-4
2-173146-9
2-173146-5
2-173146-6
2-173146-7
11.4 [.449]
13.4 [.528]
19.5 [.768]
*Contact mating area: 0.00050 [.000020] min. gold over 0.00130 [.000050] min. nickel plated.
5
Note: All part numbers are RoHS compliant.
161
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Application Tooling for ACTION PIN Stacking Connectors
Mini-Press
2. Attach insertion support plate to the leg portion of con-
nector from below.
1. Insert connector into the board tentatively (Be sure that
connector is in the right direction).
No. of
Pos.
Part No.
40
50
60
1-758030-1
1-758030-2
1-758030-3
The part numbers above
include the Mini-Press unit,
insertion support plate and
press-fit jig.
Mini-Press Unit
Part No. 1-758030-3
3. Set insertion support plate in place by butting it against
Mini-Press platform.
4. By pressing Mini-Press handle down, rest the press-fit
jig against connector.
When ordering a press-fit jig
only, consult the table
below.
Press-fit Jig (separate order)
No. of
Part No.
Pos.
5
26
30
34
40
50
60
907459-1
907459-2
907459-3
907459-4
907459-5
907459-6
Also, optional insertion
support plates are
obtainable by separate
order to meet your specific
requirements for improved
board handling.
5. Press handle down gently and insert connector into
the board.
6. Now connector has been mounted to the board
securely.
Insertion Support Unit
(Option)
Note: All part numbers are RoHS compliant.
162
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
.025 [0.64] Square Posts
.010
[0.25]
Typ.
Bandolier Posts (Uninsulated)
B
.100*
[2.54]
.010
[0.25]
.015
[0.38]
C
.070
L
of Star
[1.78]
.080
[2.03]
Bandolier
Post
.100
[2.54]
C
.002
0.05]
Dia.
D
[
Recommended
Plated Hole Size
for Tin Plated
A
Through Hole
.100
Material and Finish
Bandolier — Brass
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
[2.54]
PC Pad
.020
[0.51]
Typ.
Customer
Board
+.006
.048
-.003
+0.15
-0.08
.060
1.22
[
]
.097
[2.46]
Max.
Dimensions
B
Post Plating/Part Nos.
Plating A Plating B Plating C
Bandolier
Insertion Head
A
C
D
.353 [8.97]
.318 [8.08]
.071 [1.80] .424 [10.77] .034 [0.86]
.071 [1.80] .389 [9.88] .034 [0.86]
5-103577-1 6-103577-3 5-103577-7
5-103577-3 6-103577-5 5-103577-9
5-103577-5 6-103577-7 6-103577-1
904592-1
904591-1
904590-1
—
.034 [0.86]
.031 [0.79]
.270 [6.86]
.183 [4.65]
.071 [1.80] .341 [8.66]
Plating C — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127] nickel
on entire post
5-146079-1
—
—
—
—
.097 [2.46] .280 [7.11] .031 [0.79]
6-146079-3
—
Notes: 1. Posts can be applied using Hand Tool 91419-1.
*Point of measurement for plating thickness.
Related Product Data
Mateable Connectors —
Refer to the Mating Post Selection
Guide — page 90
2. Approximate posts per reel—30,000.
3. The Bandolier Insertion head can be used on the Comp-U-Sertor II machine or the Modular Insertion
System Bench machine (see page 153).
4. For PCB finishes other than tin, contact TE.
Accessories
End Shrouds — page 203
Application Tooling — page 153
Technical Documents — page 276
.100*
[2.54]
See mating connector for applicable
product and application specifications.
.036 .002
[0.91 0.05]
Localized
Gold Plate
Area
Recommended
Plated Hole Size
for Tin Plated
Through Hole
A
B
Strip Form Posts (Uninsulated)
5
C
.042
[1.07]
PC Pad
Localized
Tin Plate
Area
Customer
Board
.050
[1.27]
.020
[0.51]
.100
[2.54]
Typ.
Dimensions
B
.227 [5.77]
.165 [4.19]
.284 [7.21]
Post Plating/Part Nos.
Plating A Plating B Plating C
1-87878-6
Post/Tab
Insertion Head
A
C
Plating D
1-87022-4
Material and Finish
Posts — Phosphor bronze, plated as
follows:
.210 [5.33]
.278 [7.06]
.278 [7.06]
.278 [7.06]
.318 [8.08]
.437 [11.10]
.443 [11.25]
.562 [14.27]
—
—
—
5-87623-1 5-87623-4 1-87022-1 1-87022-0
904507-1
—
—
—
—
—
—
1-87022-3
—
—
—
—
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on solder
area, with entire post underplated .000050
[0.00127] nickel
.738 [18.75] 1.016 [25.81]
.165 [4.19] .483 [14.27]
1-87022-2 1-87022-4
4-87022-1 4-87022-3
Notes: 1. Approximate Posts per reel—20,000.
2. Other post lengths are available, consult TE.
*Point of measurement for plating thickness.
3. The Post/Tab Insertion Head can be used on the Comp-U-Sertor II machine or the Modular Insertion
System Bench machine (see page 153).
4. For PCB finishes other than tin, contact TE.
Plating C — .000030 [0.00076] gold over
.000050 [0.00127] nickel on entire post
Plating D — .000100-.000200 [0.00254-
0.00508] tin over .000050 [0.00127] nickel
on entire post
Note: All part numbers are RoHS compliant.
163
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Continuous Posts
Features of .025 [0.64]
Square Continuous Posts
I Brass drawn wire for posts
I .400 to 1.000 [10.16 to
25.40] overall pin length
(.010 [0.25] increments)
I Plating Options:
Tin
15µ in. gold
30µ in. gold
I Star feature also available
Benefits
I Less expensive than
bandolier style posts
I Can be placed on printed
circuit boards at any desired
centerline
I Less scrap material
(no carrier strip)
Technical Documents — page 276
Application Specification
114-13011
TE now offers AMPMODU
.025 [0.64] Square
The posts are brass drawn
wire and are inserted into a
printed circuit board via
application tooling at any
centerline configuration.
They can be used for wire
wrap applications or mated
to a receptacle.
Continuous Posts. These
posts can be used instead
of the original posts that
come on a bandolier style
carrier strip. These posts
are on a reel, but the posts
are ‘notched’ at the desired
length (no carrier strip is
needed). This feature allows
more versatility by providing
post lengths from .400 to
1.000 [10.16 to 25.40],
available in increments of
.010 [0.25].
The current rating is 3 amps.
The posts are available
plated with tin, 15µ in. gold,
or 30µ in. gold. Other plat-
ings are available upon
request.
5
TE application tooling is a
modular head (Part Number
904641-1) placed on the
Modular Insertion System
Bench Machine (Part
Number 217600-1.)
Note: All part numbers are RoHS compliant.
164
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
AMPMODU .025 [0.64] Square Continuous Posts (Continued)
Pre-Plated Tin
Part Number
Part Number
Part Number
Description
Post Length
Description
Post Length
Description
Post Length
Square
147333-1
Square with Star
147433-1
Square
Square with Star
2-147433-2
2-147433-3
2-147433-4
2-147433-5
2-147433-6
2-147433-7
2-147433-8
2-147433-9
3-147433-0
3-147433-1
3-147433-2
3-147433-3
3-147433-4
3-147433-5
3-147433-6
3-147433-7
3-147433-8
3-147433-9
4-147433-0
4-147433-1
4-147433-2
Square
Square with Star
4-147433-3
4-147433-4
4-147433-5
4-147433-6
4-147433-7
4-147433-8
4-147433-9
5-147433-0
5-147433-1
5-147433-2
5-147433-3
5-147433-4
5-147433-5
5-147433-6
5-147433-7
5-147433-8
5-147433-9
6-147433-0
6-147433-1
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
2-147333-2
2-147333-3
2-147333-4
2-147333-5
2-147333-6
2-147333-7
2-147333-8
2-147333-9
3-147333-0
3-147333-1
3-147333-2
3-147333-3
3-147333-4
3-147333-5
3-147333-6
3-147333-7
3-147333-8
3-147333-9
4-147333-0
4-147333-1
4-147333-2
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
4-147333-3
4-147333-4
4-147333-5
4-147333-6
4-147333-7
4-147333-8
4-147333-9
5-147333-0
5-147333-1
5-147333-2
5-147333-3
5-147333-4
5-147333-5
5-147333-6
5-147333-7
5-147333-8
5-147333-9
6-147333-0
6-147333-1
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
147333-2
147333-3
147333-4
147333-5
147333-6
147333-7
147333-8
147333-9
1-147333-0
1-147333-1
1-147333-2
1-147333-3
1-147333-4
1-147333-5
1-147333-6
1-147333-7
1-147333-8
1-147333-9
2-147333-0
2-147333-1
147433-2
147433-3
147433-4
147433-5
147433-6
147433-7
147433-8
147433-9
1-147433-0
1-147433-1
1-147433-2
1-147433-3
1-147433-4
1-147433-5
1-147433-6
1-147433-7
1-147433-8
1-147433-9
2-147433-0
2-147433-1
Pre-Plated 15µ in. Gold
Part Number
Part Number
Part Number
Description
Post Length
Description
Post Length
Description
Post Length
Square
147334-1
Square with Star
147434-1
Square
Square with Star
2-147434-2
2-147434-3
2-147434-4
2-147434-5
2-147434-6
2-147434-7
2-147434-8
2-147434-9
3-147434-0
3-147434-1
3-147434-2
3-147434-3
3-147434-4
3-147434-5
3-147434-6
3-147434-7
3-147434-8
3-147434-9
4-147434-0
4-147434-1
4-147434-2
Square
Square with Star
4-147434-3
4-147434-4
4-147434-5
4-147434-6
4-147434-7
4-147434-8
4-147434-9
5-147434-0
5-147434-1
5-147434-2
5-147434-3
5-147434-4
5-147434-5
5-147434-6
5-147434-7
5-147434-8
5-147434-9
6-147434-0
6-147434-1
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
2-147334-2
2-147334-3
2-147334-4
2-147334-5
2-147334-6
2-147334-7
2-147334-8
2-147334-9
3-147334-0
3-147334-1
3-147334-2
3-147334-3
3-147334-4
3-147334-5
3-147334-6
3-147334-7
3-147334-8
3-147334-9
4-147334-0
4-147334-1
4-147334-2
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
4-147334-3
4-147334-4
4-147334-5
4-147334-6
4-147334-7
4-147334-8
4-147334-9
5-147334-0
5-147334-1
5-147334-2
5-147334-3
5-147334-4
5-147334-5
5-147334-6
5-147334-7
5-147334-8
5-147334-9
6-147334-0
6-147334-1
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
147334-2
147434-2
147334-3
147434-3
147334-4
147434-4
147334-5
147434-5
147334-6
147434-6
147334-7
147434-7
147334-8
147434-8
147334-9
147434-9
1-147334-0
1-147334-1
1-147334-2
1-147334-3
1-147334-4
1-147334-5
1-147334-6
1-147334-7
1-147334-8
1-147334-9
2-147334-0
2-147334-1
1-147434-0
1-147434-1
1-147434-2
1-147434-3
1-147434-4
1-147434-5
1-147434-6
1-147434-7
1-147434-8
1-147434-9
2-147434-0
2-147434-1
5
Pre-Plated 30µ in. Gold
Part Number
Part Number
Part Number
Description
Post Length
Description
Post Length
Description
Post Length
Square
147335-1
Square with Star
147435-1
Square
Square with Star
2-147435-2
2-147435-3
2-147435-4
2-147435-5
2-147435-6
2-147435-7
2-147435-8
2-147435-9
3-147435-0
3-147435-1
3-147435-2
3-147435-3
3-147435-4
3-147435-5
3-147435-6
3-147435-7
3-147435-8
3-147435-9
4-147435-0
4-147435-1
4-147435-2
Square
Square with Star
4-147435-3
4-147435-4
4-147435-5
4-147435-6
4-147435-7
4-147435-8
4-147435-9
5-147435-0
5-147435-1
5-147435-2
5-147435-3
5-147435-4
5-147435-5
5-147435-6
5-147435-7
5-147435-8
5-147435-9
6-147435-0
6-147435-1
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
2-147335-2
2-147335-3
2-147335-4
2-147335-5
2-147335-6
2-147335-7
2-147335-8
2-147335-9
3-147335-0
3-147335-1
3-147335-2
3-147335-3
3-147335-4
3-147335-5
3-147335-6
3-147335-7
3-147335-8
3-147335-9
4-147335-0
4-147335-1
4-147335-2
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
4-147335-3
4-147335-4
4-147335-5
4-147335-6
4-147335-7
4-147335-8
4-147335-9
5-147335-0
5-147335-1
5-147335-2
5-147335-3
5-147335-4
5-147335-5
5-147335-6
5-147335-7
5-147335-8
5-147335-9
6-147335-0
6-147335-1
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
147335-2
147435-2
147335-3
147435-3
147335-4
147435-4
147335-5
147435-5
147335-6
147435-6
147335-7
147435-7
147335-8
147435-8
147335-9
147435-9
1-147335-0
1-147335-1
1-147335-2
1-147335-3
1-147335-4
1-147335-5
1-147335-6
1-147335-7
1-147335-8
1-147335-9
2-147335-0
2-147335-1
1-147435-0
1-147435-1
1-147435-2
1-147435-3
1-147435-4
1-147435-5
1-147435-6
1-147435-7
1-147435-8
1-147435-9
2-147435-0
2-147435-1
Note: All part numbers are RoHS compliant.
165
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
AMPMODU .045 [1.14] Square Continuous Posts
Features of .045 [1.14]
Square Continuous Posts
I Brass drawn wire for posts
I .400 to 1.000 [10.16 to
25.40] overall pin length
(.010 [0.25] increments)
I Plating Options:
Tin
15µ in. gold
30µ in. gold
I Star feature also available
Benefits
I Less expensive than
bandolier style posts
I Can be placed on printed
circuit boards at any desired
centerline
I Less scrap material
(no carrier strip)
Technical Documents — page 276
Application Specification
114-13011
TE now offers AMPMODU
.045 [1.14] Square
Potential industries include:
building systems,
Continuous Posts. These
posts can be used instead
of the original posts that
come on a bandolier style
carrier strip. These posts
are on a reel, but the posts
are ‘notched’ at the desired
length (no carrier strip is
needed). This feature allows
more versatility by providing
post lengths from .400 to
1.000 [10.16 to 25.40],
available in increments of
.010 [0.25].
commercial/home
equipment, household
appliances, home power
tools and equipment.
The current rating is 7 amps.
The posts are available
plated with tin, 15µ in. gold,
or 30µ in. gold. Other plat-
ings are available upon
request.
5
TE application tooling is a
modular head (Part Number
904640-1) placed on the
Modular Insertion System
Bench Machine (Part
The posts are brass drawn
wire and are inserted into a
printed circuit board via
application tooling at any
centerline configuration.
They can be used for wire
wrap applications or mated
to a receptacle.
Number 217600-1.)
Note: All part numbers are RoHS compliant.
166
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
AMPMODU .045 [1.14] Square Continuous Posts (Continued)
Pre-Plated Tin
Part Number
Part Number
Part Number
Description
Post Length
Description
Post Length
Description
Post Length
Square
147070-1
Square with Star
147436-1
Square
Square with Star
2-147436-2
2-147436-3
2-147436-4
2-147436-5
2-147436-6
2-147436-7
2-147436-8
2-147436-9
3-147436-0
3-147436-1
3-147436-2
3-147436-3
3-147436-4
3-147436-5
3-147436-6
3-147436-7
3-147436-8
3-147436-9
4-147436-0
4-147436-1
4-147436-2
Square
Square with Star
4-147436-3
4-147436-4
4-147436-5
4-147436-6
4-147436-7
4-147436-8
4-147436-9
5-147436-0
5-147436-1
5-147436-2
5-147436-3
5-147436-4
5-147436-5
5-147436-6
5-147436-7
5-147436-8
5-147436-9
6-147436-0
6-147436-1
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
2-147070-2
2-147070-3
2-147070-4
2-147070-5
2-147070-6
2-147070-7
2-147070-8
2-147070-9
3-147070-0
3-147070-1
3-147070-2
3-147070-3
3-147070-4
3-147070-5
3-147070-6
3-147070-7
3-147070-8
3-147070-9
4-147070-0
4-147070-1
4-147070-2
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
4-147070-3
4-147070-4
4-147070-5
4-147070-6
4-147070-7
4-147070-8
4-147070-9
5-147070-0
5-147070-1
5-147070-2
5-147070-3
5-147070-4
5-147070-5
5-147070-6
5-147070-7
5-147070-8
5-147070-9
6-147070-0
6-147070-1
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
147070-2
147070-3
147070-4
147070-5
147070-6
147070-7
147070-8
147070-9
1-147070-0
1-147070-1
1-147070-2
1-147070-3
1-147070-4
1-147070-5
1-147070-6
1-147070-7
1-147070-8
1-147070-9
2-147070-0
2-147070-1
147436-2
147436-3
147436-4
147436-5
147436-6
147436-7
147436-8
147436-9
1-147436-0
1-147436-1
1-147436-2
1-147436-3
1-147436-4
1-147436-5
1-147436-6
1-147436-7
1-147436-8
1-147436-9
2-147436-0
2-147436-1
Pre-Plated 15µ in. Gold
Part Number
Part Number
Part Number
Description
Post Length
Description
Post Length
Description
Post Length
Square
147071-1
Square with Star
147437-1
Square
Square with Star
2-147437-2
2-147437-3
2-147437-4
2-147437-5
2-147437-6
2-147437-7
2-147437-8
2-147437-9
3-147437-0
3-147437-1
3-147437-2
3-147437-3
3-147437-4
3-147437-5
3-147437-6
3-147437-7
3-147437-8
3-147437-9
4-147437-0
4-147437-1
4-147437-2
Square
Square with Star
4-147437-3
4-147437-4
4-147437-5
4-147437-6
4-147437-7
4-147437-8
4-147437-9
5-147437-0
5-147437-1
5-147437-2
5-147437-3
5-147437-4
5-147437-5
5-147437-6
5-147437-7
5-147437-8
5-147437-9
6-147437-0
6-147437-1
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
2-147071-2
2-147071-3
2-147071-4
2-147071-5
2-147071-6
2-147071-7
2-147071-8
2-147071-9
3-147071-0
3-147071-1
3-147071-2
3-147071-3
3-147071-4
3-147071-5
3-147071-6
3-147071-7
3-147071-8
3-147071-9
4-147071-0
4-147071-1
4-147071-2
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
4-147071-3
4-147071-4
4-147071-5
4-147071-6
4-147071-7
4-147071-8
4-147071-9
5-147071-0
5-147071-1
5-147071-2
5-147071-3
5-147071-4
5-147071-5
5-147071-6
5-147071-7
5-147071-8
5-147071-9
6-147071-0
6-147071-1
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
147071-2
147437-2
147071-3
147437-3
147071-4
147437-4
147071-5
147437-5
147071-6
147437-6
147071-7
147437-7
147071-8
147437-8
147071-9
147437-9
1-147071-0
1-147071-1
1-147071-2
1-147071-3
1-147071-4
1-147071-5
1-147071-6
1-147071-7
1-147071-8
1-147071-9
2-147071-0
2-147071-1
1-147437-0
1-147437-1
1-147437-2
1-147437-3
1-147437-4
1-147437-5
1-147437-6
1-147437-7
1-147437-8
1-147437-9
2-147437-0
2-147437-1
5
Pre-Plated 30µ in. Gold
Part Number
Part Number
Part Number
Description
Post Length
Description
Post Length
Description
Post Length
Square
147072-1
Square with Star
147438-1
Square
Square with Star
2-147438-2
2-147438-3
2-147438-4
2-147438-5
2-147438-6
2-147438-7
2-147438-8
2-147438-9
3-147438-0
3-147438-1
3-147438-2
3-147438-3
3-147438-4
3-147438-5
3-147438-6
3-147438-7
3-147438-8
3-147438-9
4-147438-0
4-147438-1
4-147438-2
Square
Square with Star
4-147438-3
4-147438-4
4-147438-5
4-147438-6
4-147438-7
4-147438-8
4-147438-9
5-147438-0
5-147438-1
5-147438-2
5-147438-3
5-147438-4
5-147438-5
5-147438-6
5-147438-7
5-147438-8
5-147438-9
6-147438-0
6-147438-1
0.400 [10.16]
0.410 [10.41]
0.420 [10.67]
0.430 [10.92]
0.440 [11.18]
0.450 [11.43]
0.460 [11.68]
0.470 [11.94]
0.480 [12.19]
0.490 [12.45]
0.500 [12.70]
0.510 [12.95]
0.520 [13.21]
0.530 [13.46]
0.540 [13.72]
0.550 [13.97]
0.560 [14.22]
0.570 [14.48]
0.580 [14.73]
0.590 [14.99]
0.600 [15.24]
2-147072-2
2-147072-3
2-147072-4
2-147072-5
2-147072-6
2-147072-7
2-147072-8
2-147072-9
3-147072-0
3-147072-1
3-147072-2
3-147072-3
3-147072-4
3-147072-5
3-147072-6
3-147072-7
3-147072-8
3-147072-9
4-147072-0
4-147072-1
4-147072-2
0.610 [15.49]
0.620 [15.75]
0.630 [16.00]
0.640 [16.26]
0.650 [16.51]
0.660 [16.76]
0.670 [17.02]
0.680 [17.27]
0.690 [17.53]
0.700 [17.78]
0.710 [18.03]
0.720 [18.29]
0.730 [18.54]
0.740 [18.80]
0.750 [19.05]
0.760 [19.30]
0.770 [19.56]
0.780 [19.81]
0.790 [20.07]
0.800 [20.32]
0.810 [20.57]
4-147072-3
4-147072-4
4-147072-5
4-147072-6
4-147072-7
4-147072-8
4-147072-9
5-147072-0
5-147072-1
5-147072-2
5-147072-3
5-147072-4
5-147072-5
5-147072-6
5-147072-7
5-147072-8
5-147072-9
6-147072-0
6-147072-1
0.820 [20.83]
0.830 [21.08]
0.840 [21.34]
0.850 [21.59]
0.860 [21.84]
0.870 [22.10]
0.880 [22.35]
0.890 [22.61]
0.900 [22.86]
0.910 [23.11]
0.920 [23.37]
0.930 [23.62]
0.940 [23.88]
0.950 [24.13]
0.960 [24.38]
0.970 [24.64]
0.980 [24.89]
0.990 [25.15]
1.000 [25.40]
147072-2
147438-2
147072-3
147438-3
147072-4
147438-4
147072-5
147438-5
147072-6
147438-6
147072-7
147438-7
147072-8
147438-8
147072-9
147438-9
1-147072-0
1-147072-1
1-147072-2
1-147072-3
1-147072-4
1-147072-5
1-147072-6
1-147072-7
1-147072-8
1-147072-9
2-147072-0
2-147072-1
1-147438-0
1-147438-1
1-147438-2
1-147438-3
1-147438-4
1-147438-5
1-147438-6
1-147438-7
1-147438-8
1-147438-9
2-147438-0
2-147438-1
Note: All part numbers are RoHS compliant.
167
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Receptacle Assemblies, Horizontal Mount
Product Facts
I All receptacle assemblies
are end stackable
I Contact design employs
dual cantilever beams with
built-in anti-overstress
feature
I Closed entry housings help
prevent post stubbing
I Wide range of sizes
available
I Other versions available
upon request
I Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94V-O rated
I Duplex gold and matte tin
plated contacts have full
nickel underplate
I Housings feature PC board
standoffs
I Solder tails accommodate
a PC board thickness of
.062 [1.57]
Horizontal Mount receptacle assemblies are available in
The receptacle contact is
an established proven
design with a fully enclosed,
one-piece “box” to protect
the contact area. In
addition, the receptacle
contact has dual cantilever
beams with a built-in
anti-overstress feature.
Standard solder tails
accommodate a board
thickness of .062 [1.57].
I Recognized under the
Component Program of
Underwriters
assemblies are designed to
reliably and economically
meet the packaging and
interconnection require-
ments of today’s electronics
industry, generally for appli-
cations using the
a wide range of position
sizes. They have end
stacking capability which
gives the added advantage
of flexibility.
Laboratories Inc.,
File No. E28476
R
I Certified by Canadian
The housings are made of
high temperature, surface
mount compatible thermo-
plastic material that is 94V-0
rated. Contacts are phos-
phor bronze, fully under-
plated with nickel to help
prevent corrosion and are
available in three plating
options.
Standards
5
R
mother/daughter board
arrangement.
Association,
File No. LR 7189
This product line is offered
in both single and double
row configurations. The
.100 [2.54] centerline
Performance
Characteristics
Mechanical Characteristics
Electrical Characteristics
Mating Force — 6.0 oz. [1.67N] per
Current Rating — 3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance — 12 milliohms
(max.)
contact (max.)
Unmating Force — .75 oz. [0.21N]
per contact (min.) during third mating
cycle
Durability — 200 cycles
Insulation Resistance —
5000 megohms (min.) between adjacent
contacts
Environmental Characteristics
Dielectric Withstanding Voltage
(at sea level) — 750 V rms
Operating Temperature —
-65°C to +125°C
168
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
.320
[8.13]
A
.050
[1.27]
(2 Plc.)
.174
[4.42]
(Point-of-Contact)
Max.
.100
[2.54]
Typ.
B
Post
Entry
Material and Finish
.115
[2.92]
Housing — Glass-filled thermoplastic,
.069
[1.75]
.137
[3.48]
black, 94V-0 rated
.125
Contacts — Phosphor bronze,
plated as follows:
1
2
[3.18]
(Localized Gold
Plate Area)
.310
[7.87]
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
C
C
Pos. Ref.
L
L
B
+.005
-.000
.060
PC Board
(Ref.)
.100*
[2.54]
.060+.0.13
1.52-.000
Typ.
[
]
.310
[7.87]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.003
.035
[0.89
Dia.
Typ.
0.08
]
Related Product Data
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 168
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
5
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
A
B
Plating A
5535676-1
Plating C
5535677-1
2
3
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000 [101.60]
.100 [2.54]
5146139-1
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
.200 [5.08]
5535676-2
5146139-2
5535677-2
4
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
3.900 [99.06]
5535676-3
5146139-3
5535677-3
5
5535676-4
5146139-4
5535677-4
6
5535676-5
5146139-5
5535677-5
7
5535676-6
5146139-6
5535677-6
8
5535676-7
5146139-7
5535677-7
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
9
5535676-8
5146139-8
5535677-8
10
11
12
13
14
15
16
17
18
19
20
30
40
5535676-9
5146139-9
5535677-9
1-5535676-0
1-5535676-1
1-5535676-2
1-5535676-3
1-5535676-4
1-5535676-5
1-5535676-6
1-5535676-7
1-5535676-8
1-5535676-9
2-5535676-9
3-5535676-9
1-5146139-0
1-5146139-1
1-5146139-2
1-5146139-3
1-5146139-4
1-5146139-5
1-5146139-6
1-5146139-7
1-5146139-8
1-5146139-9
2-5146139-9
3-5146139-9
1-5535677-0
1-5535677-1
1-5535677-2
1-5535677-3
1-5535677-4
1-5535677-5
1-5535677-6
1-5535677-7
1-5535677-8
1-5535677-9
2-5535677-9
3-5535677-9
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Note: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
Note: All part numbers are RoHS compliant.
Material — Natural color nylon
169
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerlines
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
.320
[8.13]
A
.174
[4.42]
Max.
.050
[1.27]
(2 Plc.)
(Point-of-Contact)
B
.100
[2.54]
Typ.
.118
[3.00]
(Localized Gold
Plate Area)
.100
[2.54]
Post
Entry
.238
[6.05]
.069
[1.75]
.115
[2.92]
Material and Finish
1
2
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.310
.125
[3.18]
Pos. Ref.
[7.87]
C
C
L
L
Contacts — Phosphor bronze,
plated as follows:
(Localized Gold
Plate Area)
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
B
+.005
PC Board
(Ref.)
.060
-.000
.100*
[2.54]
.060+0.13
1.52-.000
Typ.
[
]
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.310
[7.87]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.003
.035
[0.89
Dia.
Typ.
0.08
]
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 168
5
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
A
B
Plating A
6-5535512-1
6-5535512-2
6-5535512-3
6-5535512-4
5535512-1
Plating C
4
.200 [5.08]
.300 [7.62]
.100 [2.54]
.200 [5.08]
.300 [7.62]
5146140-1
6-5102084-4
6-5102084-3
6-5102084-2
6-5102084-1
6-5102084-0
5-5102084-9
5-5102084-8
5-5102084-7
5-5102084-6
5-5102084-5
5-5102084-4
5-5102084-3
5-5102084-2
5-5102084-1
5-5102084-0
4-5102084-9
4-5102084-8
4-5102084-7
4-5102084-6
4-5102084-1
3-5102084-6
6
5146140-2
8
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.500 [63.50]
3.000 [76.20]
5146140-3
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
50
60
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
5146140-4
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
5146140-5
1-5535512-7
1-5535512-8
1-5535512-6
5535512-2
5146140-6
5146140-7
5146140-8
5146140-9
1-5535512-9
5535512-3
1-5146140-0
1-5146140-1
1-5146140-2
1-5146140-3
1-5146140-4
1-5146140-5
1-5146140-6
1-5146140-7
1-5146140-8
1-5146140-9
2-5146140-0
2-5146140-1
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
2-5535512-0
2-5535512-1
2-5535512-2
2-5535512-3
5535512-4
5535512-5
2-5535512-4
2-5535512-5
5535512-7
3-5535512-0
Notes: 1.TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. .256 [6.50] minimum positive pin stop to prevent shorting between row.
Note: All part numbers are RoHS compliant.
170
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod II Surface Mount Horizontal Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline
Product Facts
I Surface mount leads
I All receptacle assemblies
are end stackable
I Contact design employs
dual cantilever beams
with built-in anti-overstress
feature
I Closed entry housings help
prevent post stubbing
I Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94 V-0 rated
I Duplex gold and matte tin
plated contacts have full
nickel underplate
I Housings feature PC board
standoffs
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
I Certified by Canadian
Standards
Horizontal surface mount
receptacle assemblies are
designed to reliably and
economically meet the
double row configurations.
The .100 [2.54] centerline
assemblies are available in
2-40 (single row) positions
are phosphor bronze, fully
underplated with nickel to
help prevent corrosion and
are available in three plating
options.
R
Association,
File No. LR 7189
packaging and interconnec- and 4-80 (double row)
tion requirements of today’s
electronics industry as
process technologies evolve the advantage of added
from wave soldering to sur-
face mount processing.
positions. Housings are
end stackable, which gives
The receptacle contact is
an established proven
design, with a fully enclosed
one-piece "box" to protect
the contact beams with
built-in anti-overstress
5
flexibility.
The housings are made of
high temperature material
that is 94V-0 rated. Contacts feature.
This broad product line is
offered in both single and
Performance
Characteristics
Mechanical Characteristics
Electrical Characteristics
Mating Force — 6.0 oz. [1.67N] per
Current Rating — 3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance — 12 milliohms
(max.)
contact (max.)
Unmating Force — .75 oz. [0.21N]
per contact (min.) during third mating
cycle
Durability — 200 cycles
Insulation Resistance — 5000
megohms (min.) between adjacent
contacts
Environmental Characteristics
Dielectric Withstanding Voltage
(at sea level) — 750 V rms
Operating Temperature —
-65°C to +125°C
171
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Single-Row, Surface Mount
.100 [2.54] Centerline
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
.320
[8.13]
A
.100
[2.54]
Typ.
.050
[1.27]
.174
[4.42]
Max.
X
(Point-of-Contact)
Material and Finish
Housing — Glass-filled thermoplastic,
.137
[3.48]
.125
[3.18]
(Localized Gold
Plate Area)
black, 94V-0 rated
.069
[1.75]
X
Contacts — Phosphor bronze,
plated as follows:
.008
.005
[0.20]
[0.13]
Typ.
.388 .010
[9.85 0.25]
Pos. No.
Ref. Typ.
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Section X–X
.100
[2.54]
Typ.
.060
[1.52]
Typ.
.356
[9.04]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.090
[2.29]
Typ.
Related Product Data
Recommended Etched Circuit Layout
(for .040 [1.02] min. thick PC Board;
.008 [0.20] thick stencil)
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
5
Performance Characteristics —
page 171
Contact Plating/Part Nos.
Plating B
No. of
Pos.
Dimension
A
Plating A
5147721-1
Plating C
5147733-1
2
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000[101.60]
5147732-1
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
3
5147721-2
5147732-2
5147733-2
4
5147721-3
5147732-3
5147733-3
5
5147721-4
5147732-4
5147733-4
6
5147721-5
5147732-5
5147733-5
7
5147721-6
5147732-6
5147733-6
8
5147721-7
5147732-7
5147733-7
9
5147721-8
5147732-8
5147733-8
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
10
11
12
13
14
15
16
17
18
19
20
30
40
5147721-9
5147732-9
5147733-9
1-5147721-0
1-5147721-1
1-5147721-2
1-5147721-3
1-5147721-4
1-5147721-5
1-5147721-6
1-5147721-7
1-5147721-8
1-5147721-9
2-5147721-9
3-5147721-9
1-5147732-0
1-5147732-1
1-5147732-2
1-5147732-3
1-5147732-4
1-5147732-5
1-5147732-6
1-5147732-7
1-5147732-8
1-5147732-9
2-5147732-9
3-5147732-9
1-5147733-0
1-5147733-1
1-5147733-2
1-5147733-3
1-5147733-4
1-5147733-5
1-5147733-6
1-5147733-7
1-5147733-8
1-5147733-9
2-5147733-9
3-5147733-9
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
172
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Double-Row, Surface Mount
.100 [2.54] Centerline
Closed Entry, End Stackable,
Short Point-of-Contact,
with Standoffs
.320
[8.13]
.174
[4.42]
(Point-of-Contact)
Max.
A
.050
[1.27]
Ref.
.100
[2.54]
Typ.
.118
[3.00]
.100
[2.54]
.256
[6.51]
Post
(Localized Gold
Plate Area)
Stop
.238
[6.05]
Material and Finish
.008
Housing — Glass-filled thermoplastic,
.005
[0.20]
[0.13]
Typ.
.125
black, 94V-0 rated
[3.18]
(Localized Gold
Plate Area)
.069
[1.75]
Contacts — Phosphor bronze,
plated as follows:
.388 .010
[9.85 0.25]
.100
[2.54]
Typ.
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.060
[1.52]
Typ.
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.356
[9.04]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.090
[2.29]
Typ.
Recommended Etched Circuit Layout
(for .040 [1.02] min thick PC Board;
.008 [0.20] thick stencil)
5
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 171
Contact Plating/Part Nos.
Plating B
No. of
Pos.
Dimension
A
Plating A
5147722-1
Plating C
5147735-1
5147735-2
4
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.500 [63.50]
3.000 [76.20]
5147734-1
6
5147722-2
5147734-2
8
5147722-3
5147734-3
5147735-3
Technical Documents — page 276
Product Specification
108-25026
Application Specification
114-25018
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
50
60
5147722-4
5147734-4
5147735-4
5147722-5
5147734-5
5147735-5
5147722-6
5147734-6
5147735-6
5147722-7
5147734-7
5147735-7
5147722-8
5147734-8
5147735-8
5147722-9
5147734-9
5147735-9
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
1-5147722-0
1-5147722-1
1-5147722-2
1-5147722-3
1-5147722-4
1-5147722-5
1-5147722-6
1-5147722-7
1-5147722-8
1-5147722-9
2-5147722-4
2-5147722-9
1-5147734-0
1-5147734-1
1-5147734-2
1-5147734-3
1-5147734-4
1-5147734-5
1-5147734-6
1-5147734-7
1-5147734-8
1-5147734-9
2-5147734-4
2-5147734-9
1-5147735-0
1-5147735-1
1-5147735-2
1-5147735-3
1-5147735-4
1-5147735-5
1-5147735-6
1-5147735-7
1-5147735-8
1-5147735-9
2-5147735-4
2-5147735-9
Note: All part numbers are RoHS
compliant.
173
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Receptacle Assemblies, Vertical Mount
Product Facts
I Dual-cantilever beam
contact with box design
I Single-row assemblies
have .100 [2.54] centerline
contact spacing; double-row
assemblies have .100 x .100
[2.54 x 2.54] centerline
contact spacing
I 3 through 40 positions in
single-row assemblies;
2 through 80 positions in
double-row assemblies
I Mod II Standard .340 [8.64]
and Mod IV low
.265 [6.73] profiles
I Mod II and Mod IV profiles
available in dual entry
I Duplex gold and matte tin
plated contacts have full
nickel underplate
I Thermoplastic housings,
94V-0 rated
I Standoffs for easy flux
cleaning
I All throughhole assemblies
Vertical receptacle
row) positions and 2-80
The receptacle contact is
an established proven
design, with a fully enclosed
one-piece “box” to protect
the contact beams.
are end stackable
assemblies are designed to
reliably and economically
meet the packaging and
interconnection
(double row) positions.
Standard and low profile
housings which are end
stackable also enhance the
product line giving the
advantage of added
flexibility.
I Recognized under the
Component Program of
Underwriters
requirements of today’s
electronics industry.
Laboratories Inc.,
File No. E28476
These assemblies are
offered in .265 [6.73]
(Mod IV) and .340[8.64]
(Mod II) high profiles.
Standard solder tails
accommodate board
thickness of .062 [1.57].
R
This broad product line
offers a wide variety of
assembly styles and
5
I Certified by Canadian
The housings are made of
flame retardant material that
Standards
R
Association,
features. They are available is 94 V-0 rated. Contacts
File No. LR 7189
in dual entry style, in both
single and double row
configurations. The .100
are phosphor bronze, fully
underplated with nickel to
help prevent corrosion and
Product styles include
single and dual tine
variations. Outrigger tine
styles are also available for
bottom entry parallel board
stacking applications.
[2.54] centerline assemblies are available in three plating
are available in 3-40 (single
options.
Performance
Characteristics
Electrical Characteristics
Mechanical Characteristics
Current Rating — 3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Mating Force — 9.0 oz. [2.5N] per
contact (max.)
Unmating Force — 1.5 oz. [0.42N]
per contact (min.)
Contact Resistance — 12 milliohms
(max.)
Durability (Tested to) — 200 cycles
Insulation Resistance — 5000
megohms (min.) between adjacent
contacts
Dielectric Withstanding Voltage
(at sea level) — 750 V rms
Environmental Characteristics
Operating Temperature —
-65°C to +125°C
174
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
.020
[0.51]
(Standoffs)
Closed Top Entry,
End Stackable, with
Single Tine Contacts
X
.340
[8.64]
X
.148
[3.76]
Point of
Contact
A
.115
[2.92]
Ref.
.107
[2.72]
.140
[3.56]
Material and Finish
(Localized Gold
Plate Area)
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
plated as follows:
.100 .003
[2.54 0.08]
.050
[1.27]
Max.
Typ.
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Dia.
Typ.
.035 .003
[0.89 0.08]
.100
[2.54]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Recommended PC Board Hole Layout
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
5
Pos.
A
B
Plating A
Plating C
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000 [101.60]
.200 [5.08]
.300 [7.62]
5-534237-1
5-534237-2
5-534237-3
5-534237-4
5-534237-5
5-534237-6
5-534237-7
5-534237-8
5-534237-9
6-534237-0
6-534237-1
6-534237-2
6-534237-3
6-534237-4
6-534237-5
6-534237-6
6-534237-7
6-534237-8
7-534237-8
8-534237-8
5-146386-1
6-146386-9
5-146386-2
5-146386-3
5-146386-4
5-146386-5
5-146386-6
5-146386-7
5-146386-8
5-146386-9
6-146386-0
6-146386-1
7-146386-0
7-146386-1
7-146386-2
7-146386-3
7-146386-4
6-146386-2
6-146386-8
8-146386-8
5-146763-5
5-146763-6
5-146763-7
5-146763-8
5-146763-1
5-146763-2
5-146763-9
5-146763-3
6-146763-0
6-146763-1
6-146763-2
6-146763-3
6-146763-4
6-146763-5
6-146763-6
6-146763-7
6-146763-8
6-146763-9
7-146763-8
8-146763-8
4
5
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
3.900 [99.06]
Technical Documents — page 276
Product Specification
108-25022
6
7
8
Application Specification
114-25018
9
10
11
12
13
14
15
16
17
18
19
20
30
40
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
Keying Plug
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
Part No. 86286-1
(Plugs into receptacle contact)
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
175
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod II Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.020
[0.51]
(Standoffs)
Closed Top Entry,
Side and End Stackable
.100 x .100 [2.54 x 2.54]
Centerline, .100 [2.54]
Tine Spacing
.340
[8.64]
A
.148
[3.77]
Typ.
Point of
Contact
.050
[1.27]
Max.
Typ.
.107
[2.72]
Typ.
(Localized
Gold Plate
Area)
.100
[2.54]
Typ.
Material and Finish
.100 .003
[2.54 0.08]
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.198
[5.03]
Contacts — Phosphor bronze,
plated as follows:
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.115 .010
[2.92 0.25]
Ref.
.100
[2.54]
Typ.
.100
[2.54]
Typ.
B
.100
[2.54]
Typ.
.035 .003
[0.89 0.08]
Dia.
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
Related Product Data
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
5
A
B
Plating A
Plating C
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
2
.100 [2.54]
.200 [5.08]
.300 [7.62]
—
5-534206-1
5-534206-2
5-534206-3
5-534206-4
5-534206-5
5-534206-6
5-534206-7
5-534206-8
5-534206-9
6-534206-0
6-534206-1
6-534206-2
6-534206-3
6-534206-4
6-534206-5
6-534206-6
6-534206-7
6-534206-8
6-534206-9
7-534206-0
5-147424-1
5-147424-2
5-147424-3
5-147424-4
5-147424-5
5-147424-6
5-147424-7
5-147424-8
5-147424-9
6-147424-0
6-147424-1
6-147424-2
6-147424-3
6-147424-4
6-147424-5
6-147424-6
6-147424-7
6-147424-8
6-147424-9
7-147424-0
5-146762-8
5-146762-9
6-146762-0
5-146762-1
5-146762-2
6-146762-1
6-146762-2
6-146762-3
5-146762-3
5-146762-7
6-146762-4
6-146762-5
6-146762-6
6-146762-7
5-146762-4
6-146762-8
6-146762-9
7-146762-0
7-146762-1
5-146762-5
4
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
6
8
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
Keying Plug
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
Part No. 86286-1
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
176
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
Dual Entry, End Stackable,
Low Profile with Dual Tine
Contacts
Contact Typ.
.020
[0.51]
Typ.
.268
Typ.
.247
[6.29]
Ref.
[6.79]
A
.050
.148
[3.76]
Typ.
Material and Finish
[1.27]
.115
[2.92]
Typ.
2 Plcs.
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
A
Contacts — Phosphor bronze,
plated as follows:
.140
[3.56]
.108
[2.74]
Typ.
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
A
Section A-A
B
Ø.067-.064
[1.70-1.63]
Typ.
.100
[2.54]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Recommended PC Board Hole Layout
Related Product Data
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
A
B
Plating A
8-87879-7
8-87879-6
8-87879-8
5-87879-3
5-87879-4
5-87879-1
5-87879-5
5-87879-2
5-87879-6
5-87879-7
5-87879-8
5-87879-9
6-87879-0
6-87879-1
6-87879-2
6-87879-3
6-87879-4
6-87879-5
7-87879-5
8-87879-5
Plating C
5
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000 [101.60]
.200 [5.08]
.300 [7.62]
5-147326-1
5-147326-2
5-147326-3
5-147326-4
5-147326-5
5-147326-6
5-147326-7
5-147326-8
5-147326-9
6-147326-0
6-147326-1
6-147326-2
6-147326-3
6-147326-4
6-147326-5
6-147326-6
6-147326-7
6-147326-8
7-147326-8
8-147326-8
5-102742-4
5-102742-8
5-102742-9
6-102742-0
5-102742-7
5-102742-3
5-102742-6
6-102742-1
5-102742-1
5-102742-2
6-102742-2
6-102742-3
6-102742-4
5-102742-5
6-102742-5
6-102742-6
6-102742-7
6-102742-8
7-102742-8
8-102742-8
4
5
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
3.900 [99.06]
6
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
Keying Plug
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
Part No. 86286-1
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and .062 for recommended board thickness.
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
177
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row,
.100 [2.54] Centerline
.020
[0.51]
Closed Top Entry,
End Stackable, Low Profile
with Single Tine Contacts
(Standoffs)
X
X
.245
[6.22]
.148
[3.76]
Point of
Contact
A
.125
[3.18]
Ref.
.140
.107
[3.56]
[2.72]
Material and Finish
(Localized
Gold Plate
Area)
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
Section XX
.050
.100 .003
[2.54 0.08]
plated as follows:
[1.27]
Max.
Typ.
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
B
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.035 .003 Dia.
[0.88 0.08] Typ.
.100
[2.54]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Recommended PC Board Hole Layout
(for .062 [1.57] thick PC board)
Related Product Data
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
Pos.
A
B
Plating A
Plating C
5
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000 [101.60]
.200 [5.08]
.300 [7.62]
5-535541-1
5-535541-2
5-535541-3
5-535541-4
5-535541-5
5-535541-6
5-535541-7
5-535541-8
5-535541-9
6-535541-0
6-535541-1
6-535541-2
6-535541-3
6-535541-4
6-535541-5
6-535541-6
6-535541-7
6-535541-8
7-535541-9
8-535541-9
5-146138-1
5-146138-2
5-146138-3
5-146138-4
5-146138-5
5-146138-6
5-146138-7
5-146138-8
5-146138-9
6-146138-0
6-146138-1
6-146138-2
6-146138-3
6-146138-4
6-146138-5
6-146138-6
6-146138-7
6-146138-8
7-146138-9
8-146138-9
5-535584-3
5-535584-4
5-535584-5
5-535584-1
5-535584-6
5-535584-7
5-535584-8
5-535584-9
6-535584-0
6-535584-1
6-535584-2
6-535584-3
6-535584-4
6-535584-5
6-535584-6
5-535584-2
6-535584-7
6-535584-8
6-535584-9
7-535584-0
4
5
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
3.900 [99.06]
6
7
8
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
9
10
11
12
13
14
15
16
17
18
19
20
30
40
Additional receptacle assembly
sizes are available; minimum order
quantities may apply. Consult TE.
Notes: 1. TE recommends mating gold or duplex plated headers with select gold plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Note: All part numbers are RoHS compliant.
178
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Closed Top Entry,
.020
[0.51]
(Standoffs)
End and Side Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.100 [2.54] Tine Spacing
.245
[6.22]
A
.148
[3.77]
Typ.
Point of
Contact
.050
[1.27]
Max.
Typ.
.107
[2.72]
Typ.
(Localized
Gold Plate
Area)
.100
2.54]
Typ.
.100 .003
[2.540.08]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze,
.198
[5.03]
plated as follows:
.125 .010
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
[3.18 0.25]
Typ.
.100
[2.54]
Typ.
.100
[2.54]
Typ.
B
.100
[2.54]
Typ.
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.035 .003
Dia.
[0.89 0.08]
Recommended PC Board Hole Layout
Related Product Data
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
5
A
B
Plating A
Plating C
2
.100 [2.54]
—
5-534998-1
5-534998-2
5-534998-3
5-534998-4
5-534998-5
5-534998-6
5-534998-7
5-534998-8
5-534998-9
6-534998-0
6-534998-1
6-534998-2
6-534998-3
6-534998-4
6-534998-5
6-534998-6
6-534998-7
6-534998-8
6-534998-9
7-534998-0
5-535598-2
5-535598-3
5-535598-4
5-535598-5
5-535598-6
5-535598-7
5-535598-1
5-535598-8
5-535598-9
6-535598-0
6-535598-1
6-535598-2
6-535598-3
6-535598-4
6-535598-5
6-535598-6
6-535598-7
6-535598-8
6-535598-9
7-535598-0
5-535585-3
5-535585-4
5-535585-5
5-535585-6
5-535585-1
5-535585-2
5-535585-7
5-535585-8
5-535585-9
6-535585-0
6-535585-1
6-535585-2
6-535585-3
6-535585-4
6-535585-5
6-535585-6
6-535585-7
6-535585-8
6-535585-9
7-535585-0
4
.200 [5.08]
.100 [2.54]
.200 [5.08]
6
.300 [7.62]
8
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
.300 [7.62]
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
Note: All part numbers are RoHS compliant.
179
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Keying Plug
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
A
B
Plating A
Plating C
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
4.000 [101.60]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
7-534998-1
7-534998-2
7-534998-3
7-534998-4
7-534998-5
7-534998-6
7-534998-7
7-534998-8
7-534998-9
8-534998-0
8-534998-1
8-534998-2
8-534998-3
8-534998-4
8-534998-5
8-534998-6
8-534998-7
8-534998-8
8-534998-9
9-534998-0
7-535598-4
7-535598-5
7-535598-6
7-535598-7
7-535598-1
7-535598-8
7-535598-9
8-535598-0
8-535598-1
7-535598-2
8-535598-2
8-535598-3
8-535598-4
8-535598-5
8-535598-6
8-535598-7
8-535598-8
8-535598-9
9-535598-0
7-535598-3
7-535585-4
7-535585-5
7-535585-6
7-535585-7
7-535585-1
7-535585-8
7-535585-9
8-535585-0
8-535585-1
7-535585-2
8-535585-2
8-535585-3
8-535585-4
8-535585-5
8-535585-6
8-535585-7
8-535585-8
8-535585-9
9-535585-0
7-535585-3
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension.
5
Note: All part numbers are RoHS compliant.
180
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Outrigger Design
.100 x .100 [2.54 x 2.54] Centerline, End To End Stackable
.125 .010
[3.17 0.25]
Typ.
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.200 [5.08] Tine Spacing
.020
[0.51]
(Standoffs)
.245
[6.22]
.148
A
Point of
[3.77]
Contact
Typ.
.107
[2.72]
(Localized Gold
Plate Area)
.200 .003
[5.08 0.08]
Typ.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.140
[3.56]
.053
[1.34]
Typ.
.100
[2.54]
Typ.
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-0.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
B
+.005
-.000
+0.13
-.000
.075
1.90
[
]
.200
[5.08]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.140
[3.56]
.100
[2.54]
Typ.
.035 .003
[0.89 0.08]
Dia.
Recommended PC Board Hole Layout
5
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
A
B
Plating A
Plating C
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000 [101.60]
.200 [5.08]
.300 [7.62]
5-147720-2
5-147720-3
5-147720-4
5-147720-5
5-147720-6
5-147720-7
5-147720-8
5-147720-9
6-147720-0
6-147720-1
6-147720-2
6-147720-3
6-147720-4
6-147720-5
6-147720-6
6-147720-7
6-147720-8
7-147720-8
8-147720-8
8-147720-9
5-147726-2
5-147726-3
5-147726-4
5-147726-5
5-147726-6
5-147726-7
5-147726-8
5-147726-9
6-147726-0
6-147726-1
6-147726-2
6-147726-3
6-147726-4
6-147726-5
6-147726-6
6-147726-7
6-147726-8
7-147726-8
8-147726-8
8-147726-9
5-147727-2
5-147727-3
5-147727-4
5-147727-5
5-147727-6
5-147727-7
5-147727-8
5-147727-9
6-147727-0
6-147727-1
6-147727-2
6-147727-3
6-147727-4
6-147727-5
6-147727-6
6-147727-7
6-147727-8
7-147727-8
8-147727-8
8-147727-9
4
5
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
3.900 [99.06]
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension and add .062 [1.57] for recommended board thickness if used in
bottom entry application.
Note: All part numbers are RoHS
compliant.
181
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Double-Row, Outrigger Design,
.100 x .100 [2.54 x 2.54] Centerline, End to End Stackable
Dual Entry, End Stackable,
Low Profile, .100 x .100
[2.54 x 2.54] Centerline,
.300 [7.62] Tine Spacing
.020
[0.51]
(Standoffs)
.245
[6.22]
Typ.
A
.148
Point of
Contact
.050
[1.27]
Max.
Typ.
[3.77]
Typ.
.107
[2.72]
Typ.
(Localized Gold
Plate Area)
.100 .003
[2.54 0.08]
Material and Finish
.300
[7.62]
Typ.
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.198
[5.03]
Contacts — Phosphor bronze,
plated as follows:
.125 .010
[3.17 0.25]
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.100
[2.54]
Typ.
.100
[2.54]
Typ.
B
.100
[2.54]
Typ.
.100
[2.54]
Typ.
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
Related Product Data
+.005
-0.00
+0.13
-0.00
.100
[2.54]
Typ.
5
.075
.060
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Dia.
Typ.
Dia.
]
Typ.
.035
[0.89
.003
1.90
[
]
0.08
Recommended PC Board Hole Layout
Performance Characteristics —
page 174
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
A
B
Plating A
Plating C
2
.100 [2.54]
.200 [5.08]
.300 [7.62]
—
6-534267-3
6-534267-7
6-534267-4
5-534267-5
5-534267-1
6-534267-0
5-534267-2
5-534267-9
6-534267-2
6-534267-5
5-534267-7
6-534267-1
6-534267-8
5-534267-8
6-534267-6
5-534267-4
5-147099-1
5-147099-2
5-147099-3
5-147099-4
5-147099-7
5-147099-9
6-147099-0
6-147099-2
6-147099-5
6-147099-8
7-147099-0
7-147099-4
7-147099-5
8-147099-0
8-147099-8
9-147099-0
8-147100-9
9-147100-0
5-147100-1
5-147100-2
5-147100-5
5-147100-7
5-147100-8
6-147100-0
6-147100-3
6-147100-6
6-147100-8
7-147100-2
7-147100-3
7-147100-8
8-147100-6
8-147100-8
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
4
.100 [2.54]
.200 [5.08]
.300 [7.62]
.600 [15.24]
.800 [20.32]
.900 [22.86]
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.300 [58.42]
2.400 [60.96]
2.900 [73.66]
3.700 [93.98]
3.900 [99.06]
6
8
.400 [10.16]
.700 [17.78]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.500 [38.10]
1.800 [45.72]
2.000 [50.80]
2.400 [60.96]
2.500 [63.50]
3.000 [76.20]
3.800 [96.52]
4.000 [101.60]
14
18
20
24
30
36
40
48
50
60
76
80
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult TE.
Keying Plug
Notes: 1.TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
Part No. 86286-1
(Plugs into receptacle contact)
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the
maximum point-of-contact dimension and .062 for recommended board thickness if used in bottom entry
application.
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
182
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
.020
[0.51]
Typ.
Closed Dual Entry, Side and
End Stackable Low Profile,
.100 x .100 [2.54 x 2.54]
Centerline, .150 [3.81] Tine
Spacing
(Standoffs)
.245
[6.22]
Typ.
A
.050
[1.27]
Max.
Typ.
.150
[3.81]
Typ.
.148
[3.77]
Typ.
Point of
Contact
Material and Finish
.100 .003
[2.54 0.08]
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.198
[5.03]
Contacts — Phosphor bronze,
plated as follows:
.107
[2.72]
Typ.
.130 .010
[3.30 0.25]
Typ.
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
(Localized Gold
Plate Area)
.100
[2.54]
B
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
B
.100*
[2.54]
Typ.
+.005
-.000
.075
.100
[2.54]
Typ.
Dia.
Typ.
.100
[2.54]
Typ.
.060+0.13
1.90-
[
0.00
]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.150
[3.81]
Typ.
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
for Bottom Entry or Pass Through Applications
Related Product Data
Recommended PC Board Hole Layout
for Top Entry
* .003 [ 0.08] tolerances not to accumulate
within one connector pattern.
Mateable Headers —
Refer to the Mating Post Selection
Guide — page 90
Performance Characteristics —
page 174
5
Dimensions
Contact Plating/Part Nos.
No. of
Pos.
A
B
Plating A
Plating B
Plating C
2
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
—
5-535542-1
5-535542-2
5-535542-3
5-535542-4
5-535542-5
5-535542-6
5-535542-7
5-535542-8
5-535542-9
6-535542-0
6-535542-1
6-535542-2
6-535542-3
6-535542-4
6-535542-5
6-535542-6
6-535542-7
6-535542-8
6-535542-9
7-535542-0
5-147095-1
5-147095-2
5-147095-3
5-147095-4
5-147095-5
5-147095-6
5-147095-7
5-147095-8
5-147095-9
6-147095-0
6-147095-1
6-147095-2
6-147095-3
6-147095-4
6-147095-5
6-147095-6
6-147095-7
6-147095-8
6-147095-9
7-147095-0
5-147096-1
5-147096-2
5-147096-3
5-147096-4
5-147096-5
5-147096-6
5-147096-7
5-147096-8
5-147096-9
6-147096-0
6-147096-1
6-147096-2
6-147096-3
6-147096-4
6-147096-5
6-147096-6
6-147096-7
6-147096-8
6-147096-9
7-147096-0
4
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
6
Technical Documents — page 276
Product Specification
108-25022
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Application Specification
114-25018
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle
assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bot-
tom entry application.
Note: All part numbers are RoHS
compliant.
183
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod. IV Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Dimensions
Contact Plating/Part Nos.
Plating B
No. of
Pos.
A
B
Plating A
Plating C
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
4.000 [101.60]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
3.700 [93.98]
3.800 [96.52]
3.900 [99.06]
7-535542-1
7-535542-2
7-535542-3
7-535542-4
7-535542-5
7-535542-6
7-535542-7
7-535542-8
7-535542-9
8-535542-0
8-535542-1
8-535542-2
8-535542-3
8-535542-4
8-535542-5
8-535542-6
8-535542-7
8-535542-8
8-535542-9
9-535542-0
7-147095-1
7-147095-2
7-147095-3
7-147095-4
7-147095-5
7-147095-6
7-147095-7
7-147095-8
7-147095-9
8-147095-0
8-147095-1
8-147095-2
8-147095-3
8-147095-4
8-147095-5
8-147095-6
8-147095-7
8-147095-8
8-147095-9
9-147095-0
7-147096-1
7-147096-2
7-147096-3
7-147096-4
7-147096-5
7-147096-6
7-147096-7
7-147096-8
7-147096-9
8-147096-0
8-147096-1
8-147096-2
8-147096-3
8-147096-4
8-147096-5
8-147096-6
8-147096-7
8-147096-8
8-147096-9
9-147096-0
5
Note: All part numbers are RoHS compliant.
184
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Surface Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline
Product Facts
I Surface Mount Leads
I Contact Material:
phosphor bronze
I High temperature, black
thermoplastic housings,
94V-0 rated, capable of
withstanding IR or vapor-
phase reflow
I Gold/tin duplex plating
for reliable mating
interconnection and solder
interface
I Metallic hold downs provide
retention in the PC board
prior to and during the
reflow process … and strain
relief after soldering
I Hold downs provide for
proper lead-to-pad
registration
I Closed-entry receptacle
housings provide lead-in
ramp for positive mating
The AMPMODU 0.025 [0.64] AMPMODU surface mount
downs are soldered during
square interconnection
system is an industry
standard that has provided
level III and IV thru-hole
interconnections to almost
every industry and
marketplace for years.
As technology advances,
so has the AMPMODU
product line.
vertical receptacle
the reflow process and
serve as a strain relief for
the solder joints during
mating/unmating.
assemblies continue to
provide the proven features
and benefits of their
I Receptacle contacts employ
dual cantilever beams for
reliable connections
thru-hole counterparts in the
AMPMODU product family.
Closed-entry style housing
design provides a lead-in
ramp for positive mating of
contacts, virtually eliminating
the possibility of stubbing.
The dual-beam receptacle
contact design, coupled with
gold plating in the contact
area, provides a reliable
interface. Tin plating on the
solder tails also enhances
solderability.
The design of the hold
downs results in an
excellent ratio of
I Recognized under the
Component Program
of Underwriters
insertion/extraction forces
(into the PC board); 20 lb.
[89 N] maximum insertion
force per pair and 10 lb.
[44.5 N] minimum extraction
force per pair (unsoldered).
No tools are required for
insertion.
Laboratories Inc.
File No. E28476
R
5
Surface mount vertical
receptacle assemblies are
available to meet your level
II packaging needs as
process technologies
I Certified by
Canadian Standards
Association,
R
File No. LR 7189
evolve from wave soldering
to surface mount reflow
(infrared and vapor-phase)
processes. AMPMODU
surface mount receptacle
assemblies are offered in
vertical dual entry
The incorporation of
compliant metallic hold
downs on receptacle
assemblies offers multiple
benefits. The hold downs
provide for proper lead-to-
pad registration and provide
retention to the PC board
prior to and during
configurations. These
receptacles are available in
single-row and double-row
configurations with a
contact centerline spacing
of .100 x .100 [2.54 x 2.54].
processing. Used with a
plated thru-hole, the hold
185
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Mod IV Surface Mount Vertical Receptacle Assemblies,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Voltage Rating: 250 VAC
Performance Specifications
Current Rating: 3.0 amperes (max.) for single contact;
2.0 amperes (max.) per contact when connector is fully energized
Operating Temperature Range (Receptacle Assemblies): –65°C to +125°C
Operating Temperature Range (Headers): -65°C to +105°C
Dielectric Withstanding Voltage: 750 VAC
Termination Resistance: 12 milliohms (max.)
Insulation Resistance: 5000 megohms (min.)
Mating Force (Receptacle Assemblies): 9.0 oz. [2.50N] (max.) per contact
Unmating Force (Receptacle Assemblies): 1.5 oz. [0.42N] (min.) per contact
Durability: Tested to 200 cycles (min.) for .000030 [0.00076] gold plated contacts
5
186
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Surface Mount,
.100 [2.54] Centerline with Compliant Pin Hold Downs
.030 0.76
.025 0.64
Typ.
.020 Standoffs
[0.51] Typ.
Surface Mount, Single-Row,
Dual Entry with Compliant
Pin Holddowns
.038
[0.97]
[
]
.265
[6.73]
Typ.
.107
[2.72]
(Localized Gold
Plate Area)
D
C
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.208
[5.28]
(Depressed)
.140
[3.56]
Max.
Contacts — Phosphor bronze, plated
.100
[2.54]
Typ.
.148
[3.77]
Point of
Contact
as follows:
A
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
D
B
.100
[2.54]
.069
[1.75]
P.C. Board
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.228
[5.78]
.075
[1.91]
.090
[2.28]
Typ.
.042 .003
[1.07 0.08]
.110
[2.79]
Dia.
.042 .003
[1.07 0.08]
Dia.
Dia.
.040 .003
[1.02 0.08]
Dia. Typ.
(For bottom
entry or pass
thru applica-
tions)
C
.060
[1.52]
Min.
.042 .003
[1.07 0.08]
Related Product Data
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
Packaged in Tubes
Contact Plating/ Part Nos.
Packaged in Tape & Reel
Contact Plating/ Part Nos.
No. of
Pos.
Dimensions
5
A
B
C
D
Plating A
Plating B
Plating C
Plating A
5-147724-1
5-147724-2
5-147724-3
5-147724-4
5-147724-5
5-147724-6
5-147724-7
5-147724-8
5-147724-9
6-147724-0
6-147724-1
6-147724-2
6-147724-3
6-147724-4
6-147724-5
6-147724-6
6-147724-7
6-147724-8
7-147724-8
8-147724-8
Plating B
Plating C
3
4
5
6
7
8
9
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
See note 3
See note 3
See note 3
See note 3
See note 3
See note 3
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
5-147744-1 5-147743-1 5-147742-1
5-147744-2 5-147743-2 5-147742-2
5-147744-3 5-147743-3 5-147742-3
5-147744-4 5-147743-4 5-147742-4
5-147744-5 5-147743-5 5-147742-5
5-147744-6 5-147743-6 5-147742-6
5-147744-7 5-147743-7 5-147742-7
5-147744-8 5-147743-8 5-147742-8
5-147744-9 5-147743-9 5-147742-9
6-147744-0 6-147743-0 6-147742-0
6-147744-1 6-147743-1 6-147742-1
6-147744-2 6-147743-2 6-147742-2
6-147744-3 6-147743-3 6-147742-3
6-147744-4 6-147743-4 6-147742-4
6-147744-5 6-147743-5 6-147742-5
6-147744-6 6-147743-6 6-147742-6
6-147744-7 6-147743-7 6-147742-7
6-147744-8 6-147743-8 6-147742-8
7-147744-8 7-147743-8 7-147742-8
8-147744-8 8-147743-8 8-147742-8
5-147730-1 5-147731-1
5-147730-2 5-147731-2
5-147730-3 5-147731-3
5-147730-4 5-147731-4
5-147730-5 5-147731-5
5-147730-6 5-147731-6
5-147730-7 5-147731-7
5-147730-8 5-147731-8
5-147730-9 5-147731-9
6-147730-0 6-147731-0
6-147730-1 6-147731-1
6-147730-2 6-147731-2
6-147730-3 6-147731-3
6-147730-4 6-147731-4
6-147730-5 6-147731-5
6-147730-6 6-147731-6
6-147730-7 6-147731-7
6-147730-8 6-147731-8
7-147730-8 7-147731-8
8-147730-8 8-147731-8
See note 3 1.000 [25.40]
See note 3 1.100 [27.94]
See note 3 1.200 [30.48]
See note 3 1.300 [33.02]
See note 3 1.400 [35.56]
See note 3 1.500 [38.10]
See note 3 1.600 [40.64]
See note 3 1.700 [43.18]
See note 3 1.800 [45.72]
See note 3 1.900 [48.26]
See note 3 2.000 [50.80]
See note 3 2.100 [53.34]
See note 3 3.100 [78.74]
10 1.200 [30.48]
11 1.300 [33.02] 1.000 [25.40]
12 1.400 [35.56] 1.100 [27.94]
13 1.500 [38.10] 1.200 [30.48]
14 1.600 [40.64] 1.300 [33.02]
15 1.700 [43.18] 1.400 [35.56]
16 1.800 [45.72] 1.500 [38.10]
17 1.900 [48.26] 1.600 [40.64]
18 2.000 [50.80] 1.700 [43.18]
19 2.100 [53.34] 1.800 [45.72]
20 2.200 [55.88] 1.900 [48.26]
30 3.200 [81.28] 2.900 [73.66]
40 4.300 [109.22] 4.100 [104.14] 2.100 [53.34] 4.200 [106.68]
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and
.062 [1.57] for recommended board thickness if used in bottom entry application
3. No center hold down.
Note: All part numbers are RoHS compliant.
187
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54] x
.100 [2.54] Centerline End To End Stackable without Compliant Pin Holddowns
.020
Standoff Typ.
[0.51]
Surface Mount,Single-Row,
Dual Entry, End to End
Stackable
.265
[6.73]
.107
[2.72]
Typ.
.208
[5.28]
A
Max.
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.100
[2.54]
Typ.
(Localized Gold
Plate Area)
Contacts — Phosphor bronze, plated
as follows:
.140
[3.56]
Plating A — Duplex .000030
[0.00076] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Point of
Contact
.148
[3.77]
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
.040 .003
[1.02 0.08]
(For bottom entry or pass
through applications)
B
Dia. Typ.
.100
[2.54]
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.228
[5.78]
Related Product Data
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
.060
[1.52]
Min.
.090
[2.28]
Recommended PC Board Pad Pattern
(.008 [0.20] thick stencil)
Performance Specifications —
page 186
5
Packaged in Tubes
Contact Plating/ Part Nos.
Packaged in Tape & Reel
Contact Plating/ Part Nos.
No. of
Pos.
Dimensions
A
B
Plating A
5-147738-2
5-147738-3
5-147738-4
5-147738-5
5-147738-6
5-147738-7
5-147738-8
5-147738-9
6-147738-0
6-147738-1
6-147738-2
6-147738-3
6-147738-4
6-147738-5
6-147738-6
6-147738-7
6-147738-8
6-147738-9
7-147738-9
8-147738-9
Plating B
5-147737-2
5-147737-3
5-147737-4
5-147737-5
5-147737-6
5-147737-7
5-147737-8
5-147737-9
6-147737-0
6-147737-1
6-147737-2
6-147737-3
6-147737-4
6-147737-5
6-147737-6
6-147737-7
6-147737-8
6-147737-9
7-147737-9
8-147737-9
Plating C
Plating A
Plating B
5-147728-2
5-147728-3
5-147728-4
5-147728-5
5-147728-6
5-147728-7
5-147728-8
5-147728-9
6-147728-0
6-147728-1
6-147728-2
6-147728-3
6-147728-4
6-147728-5
6-147728-6
6-147728-7
6-147728-8
6-147728-9
7-147728-9
8-147728-9
Plating C
5-147729-2
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
3.000 [76.20]
4.000 [101.60]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.900 [73.66]
3.900 [99.06]
5-147736-2
5-147736-3
5-147736-4
5-147736-5
5-147736-6
5-147736-7
5-147736-8
5-147736-9
6-147736-0
6-147736-1
6-147736-2
6-147736-3
6-147736-4
6-147736-5
6-147736-6
6-147736-7
6-147736-8
6-147736-9
7-147736-9
8-147736-9
5-147723-2
5-147723-3
5-147723-4
5-147723-5
5-147723-6
5-147723-7
5-147723-8
5-147723-9
6-147723-0
6-147723-1
6-147723-2
6-147723-3
6-147723-4
6-147723-5
6-147723-6
6-147723-7
6-147723-8
6-147723-9
7-147723-9
8-147723-9
4
5-147729-3
5-147729-4
5-147729-5
5-147729-6
5-147729-7
5-147729-8
5-147729-9
6-147729-0
6-147729-1
6-147729-2
6-147729-3
6-147729-4
6-147729-5
6-147729-6
6-147729-7
6-147729-8
6-147729-9
7-147729-9
8-147729-9
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30
40
Notes: 1. TE recommends mating gold or duplex plated headers with duplex plated receptacle assemblies.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to
the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application.
Note: All part numbers are RoHS compliant.
188
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers
Surface Mount,Double Row,
Dual Entry with Holddowns
A
.100
[2.54]
Typ.
.050
[1.27]
Typ.
.198
[5.03]
.148
.107
[2.72]
Typ.
Point of
Contact
.265
[6.73]
Typ.
[3.76]
Typ.
(Localized Gold
Plate Area)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
.083
[2.12]
Typ.
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
.020
[0.51]
Typ.
.027 .002
[0.69 0.05]
Typ.
.266
[6.75]
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] matte tin on solder
leads, all over .000050 [0.00127] nickel
.110
[2.79]
Typ.
.238
[6.05]
Typ.
B
.040 .003
[1.02 0.08]
.100
[2.54]
.100
[2.54]
Typ.
Typ.
.004
[0.10]
Typ.
Related Product Data
.075
[1.91]
Typ.
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
.090
[2.29]
Typ.
.040
[1.02]
Typ.
.040 .003
[1.02 0.08]
D
(For bottom entry or
pass thru applications)
5
.060
[1.52]
Typ.
Technical Documents — page 276
C
Product Specification
108-25022
Recommended PC Board Layout
(.008 [0.20] thick stencil)
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult TE.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
189
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centers (Continued)
Packaged in Tubes
Contact Plating/Part Nos.
Packaged in Tape and Reel
Contact Plating/Part Nos.
Plating A Plating B Plating C
Dimensions
No. of
Pos.
10
A
B
C
D
Plating A
Plating B
Plating C
.700 [17.78] .400 [10.16]
.900 [22.86] .600 [15.24]
.600 [15.24] See Note 1
.800 [20.32] See Note 1
5-147102-5
5-147102-7
6-147102-0
6-147102-1
6-147102-3
6-147102-5
6-147102-7
6-147102-8
7-147102-0
7-147102-3
7-147102-5
8-147102-1
8-147102-2
8-147102-3
8-147102-5
9-147102-0
5-147101-5 5-147103-5 5-147747-5 5-147746-5 5-147745-5
5-147101-7 5-147103-7 5-147747-7 5-147746-7 5-147745-7
6-147101-0 6-147103-0 6-147747-0 6-147746-0 6-147745-0
6-147101-1 6-147103-1 6-147747-1 6-147746-1 6-147745-1
6-147101-3 6-147103-3 6-147747-3 6-147746-3 6-147745-3
6-147101-5 6-147103-5 6-147747-5 6-147746-5 6-147745-5
6-147101-7 6-147103-7 6-147747-7 6-147746-7 6-147745-7
6-147101-8 6-147103-8 6-147747-8 6-147746-8 6-147745-8
7-147101-0 7-147103-0 7-147747-0 7-147746-0 7-147745-0
7-147101-3 7-147103-3 7-147747-3 7-147746-3 7-147745-3
7-147101-5 7-147103-5 7-147747-5 7-147746-5 7-147745-5
8-147101-1 8-147103-1 8-147747-1 8-147746-1 8-147745-1
8-147101-2 8-147103-2 8-147747-2 8-147746-2 8-147745-2
8-147101-3 8-147103-3 8-147747-3 8-147746-3 8-147745-3
8-147101-5 8-147103-5 8-147747-5 8-147746-5 8-147745-5
9-147101-0 9-147103-0 9-147747-0 9-147746-0 9-147745-0
14
20 1.200 [30.48] .900 [22.86] 1.100 [27.94] See Note 1
22 1.300 [33.02] 1.000 [25.40] 1.200 [30.48] See Note 1
26 1.500 [38.10] 1.200 [30.48] 1.400 [35.56] See Note 1
30 1.700 [43.18] 1.400 [35.56] 1.600 [40.64] See Note 1
34 1.900 [48.26] 1.600 [40.64] 1.800 [45.72] See Note 1
36 2.000 [50.08] 1.700 [43.18] 1.900 [48.26] See Note 1
40 2.200 [55.88] 1.900 [48.26] 2.100 [53.34] See Note 1
46 2.500 [63.50] 2.200 [55.88] 2.400 [60.96] See Note 1
50 2.700 [68.58] 2.400 [60.96] 2.600 [66.04] See Note 1
62 3.300 [83.82] 3.000 [76.20] 3.200 [81.28] See Note 1
64 3.400 [86.36] 3.100 [78.74] 3.300 [83.82] See Note 1
66 3.500 [88.90] 3.200 [81.28] 3.400 [86.36] See Note 1
70 3.700 [95.98] 3.400 [86.36] 3.600 [91.44] See Note 1
80 4.300 [109.22] 3.900 [99.06] 4.200 [106.68] 2.100 [53.34]
Notes: 1. No center holddown.
2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
5
Note: All part numbers are RoHS compliant.
190
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Surface Mount,Double Row,
Dual Entry
End to End Stackable
A
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.198 .002
[5.03 0.05]
.050
[1.27]
Max.
.148 Point of
[3.76] Contact
.265
[6.73]
Typ.
.107
[2.72]
Material and Finish
(Localized Gold
Plate Area)
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Phosphor bronze, plated
as follows:
Plating A — Duplex .000030 [0.00076]
gold on contact area, .000150-.000300
[0.00381-0.00762] matte tin on solder
area all over .000050 [0.00127] nickel
.020
[0.51]
Typ.
.027 .002
[0.69 0.05]
.266
[6.75]
Typ.
Plating B — Duplex .000010
[0.000254] gold on contact area,
.000150-.000300 [0.00381-0.00762]
matte tin on solder area all over .000050
[0.00127] nickel
Plating C — .000150-.000300
[0.00381-0.00762] tin-lead over
.000050 [0.00127] nickel
.238
[6.05]
Typ.
B
.100
[2.54]
Typ.
.100
[2.54]
Typ.
.004
[0.10]
Typ.
.090
[2.29]
Related Product Data
.060
Typ.
[1.52]
Mateable Headers —
Refer to Mating Post Selection Guide —
page 90
Performance Specifications —
page 186
.040
[1.02]
Typ.
5
Recommended PC Board Pad Layout
(.008 [0.20] thick stencil)
(for Bottom Entry and Pass Through applications)
Technical Documents — page 276
Product Specification
108-25022
Application Specification
114-25018
Additional receptacle assembly
sizes are available; minimum
order quantities may apply.
Consult TE.
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
191
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Mod IV Surface Mount Receptacle Assemblies, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Packaged in Tubes
Contact Plating/ Part Nos.
Packaged in Tape & Reel
Contact Plating/ Part Nos.
Plating A Plating C
No. of
Pos.
Dimensions
A
B
Plating A
Plating B
5-147740-5
5-147740-7
6-147740-0
6-147740-1
6-147740-3
6-147740-5
6-147740-7
6-147740-8
7-147740-0
7-147740-3
7-147740-5
8-147740-1
8-147740-2
8-147740-3
8-147740-5
9-147740-0
Plating C
Plating B
5-147104-5
5-147104-7
6-147104-0
6-147104-1
6-147104-3
6-147104-5
6-147104-7
6-147104-8
7-147104-0
7-147104-3
7-147104-5
8-147104-1
8-147104-2
8-147104-3
8-147104-5
9-147104-0
10
14
20
22
26
30
34
36
40
46
50
62
64
66
70
80
.500 [12.70]
.700 [17.78]
1.000 [25.40]
1.100 [27.94]
1.300 [33.02]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
2.000 [50.80]
2.300 [58.42]
2.500 [63.50]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
4.000 [101.60]
.400 [10.16]
.600 [15.24]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.700 [43.18]
1.900 [48.26]
2.200 [55.88]
2.400 [60.96]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.400 [86.36]
3.900 [99.06]
5-147741-5
5-147741-7
6-147741-0
6-147741-1
6-147741-3
6-147741-5
6-147741-7
6-147741-8
7-147741-0
7-147741-3
7-147741-5
8-147741-1
8-147741-2
8-147741-3
8-147741-5
9-147741-0
5-147739-5
5-147739-7
6-147739-0
6-147739-1
6-147739-3
6-147739-5
6-147739-7
6-147739-8
7-147739-0
7-147739-3
7-147739-5
8-147739-1
8-147739-2
8-147739-3
8-147739-5
9-147739-0
5-147105-5
5-147105-7
6-147105-0
6-147105-1
6-147105-3
6-147105-5
6-147105-7
6-147105-8
7-147105-0
7-147105-3
7-147105-5
8-147105-1
8-147105-2
8-147105-3
8-147105-5
9-147105-0
5-147106-5
5-147106-7
6-147106-0
6-147106-1
6-147106-3
6-147106-5
6-147106-7
6-147106-8
7-147106-0
7-147106-3
7-147106-5
8-147106-1
8-147106-2
8-147106-3
8-147106-5
9-147106-0
Notes: 1. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension and
.062 [1.57] for recommended board thickness in bottom entry applications.
5
Note: All part numbers are RoHS compliant.
192
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Two-Piece Printed Circuit Board Connectors
Product Facts
I Two-Piece reliability
I Two- and three-row systems
available
I Short signal path for VLSI
applications
I Receptacles employ dual
cantilever beams and built-
in anti-overstress to provide
reliable connections
I Built-in guides provide
alignment before contact
engagement
I Closed entry receptacle
housings provide lead-in
ramp for positive mating of
contacts
I Shrouded headers provide
full pin protection
I Polarized headers
I Vertical headers available
with ACTION PIN posts or
.025 [0.64] square solder
posts
I Repairable ACTION PIN
posts
I Simple seating tooling for
headers with ACTION PIN
posts
ACTION PIN Posts
Solder Posts
I Recognized under the
Component Program
of Underwriters
5
Laboratories Inc.,
File No. E28476
R
I Certified by Canadian
Standards
Receptacle Contact
(Double Beam with Anti-Overstress)
Association,
R
File No. LR 7189
Board Retention Feature Available
3-Row Closed Entry
Receptacle 5-534974-8
3-Row Header
5-103264-3
5-532956-3 Horizontal
Receptacle
5-534972-2 Vertical
Receptacle
5-102690-3
Vertical Header
with ACTION PIN
Posts
Double-Row
Make First/Break
Last Header
(Part Nos. available
upon request)
6-102589-2 3/4 Shroud,
Right Angle Header
For drawings, technical data or samples,
contact your TE sales engineer or call
the TE Product Information Center:
1-800-522-6752
5-532956-3 Horizontal
Receptacle
Note: All part numbers are RoHS
compliant.
193
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Two-Piece Printed Circuit Board Connectors (Continued)
AMPMODU Two-Piece
Printed Circuit Board
connectors are designed
to reliably and economically
meet the packaging and
interconnection requirements horizontal receptacles).
of today’s sophisticated
electronics.
The AMPMODU three-row
connector system is
produced in 30 through 300
positions (straight post
headers and mating
A board retention feature
is offered in the two-row
horizontal receptacles,
two-row right angle headers
and two- and three-row
vertical headers. Built-in
guides assure accurate
header and receptacle
alignment before contact
engagement.
Both two- and three-row
vertical headers are
The double row system is
produced in 10 thru 200
positions in the vertical
headers and horizontal
receptacles, and 10 thru
160 positions in the right
angle headers and vertical
receptacles.
available with press-fit
ACTION PIN posts or
standard .025 [0.64] square
solder posts. There is a
simple seating tool for
headers with ACTION PIN
posts.
Closed entry receptacle
housings provide a lead-in
ramp for positive mating of
contacts.
Temperature Rating —
Headers and Receptacles —
–65°C to +125°C (black thermoplastic
housings, 94V-0 rated)
Durability (Tested to) — 200 cycles
for .000030 [0.00076] gold plating;
75 cycles for .000015 [0.00038] gold
plating
Mating Force — 8 oz. [2.22N]
maximum per contact
Unmating Force — .75 oz. [0.2N]
minimum per contact during third
mating cycle
Performance Specifications
Current Rating —
3 amperes max. for single contact;
2 amperes max. per contact for fully
energized connector
Voltage Rating — 250 VAC
Dielectric Rating — 750 VAC rms
between contacts for one minute
Termination Resistance —
12 milliohms max. at 100 milliamperes
test current, and 50 millivolts open cir-
cuit voltage
Insulation Resistance — 1000
megohms after temperature/humidity
cycling
5
194
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Horizontal Mount (with Guide
Pin Slots and Standoffs)
.320
[8.13]
.174
[4.42]
Max.
(Point of Contact)
A
.179
[4.55]
Typ.
.256
[6.50]
(See Note 3.)
Min.
B
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.100
[2.54]
Contacts — Phosphor bronze, plated
as follows:
.238
[6.05]
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050-
.000100 [0.00127-0.00254] matte tin on
solder area, with entire contact under-
plated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire con-
tact underplated .000050 [0.00127]
nickel
.144
[3.66]
(2 Plc.)
Dia.
.125
[3.17]
.069
[1.75]
(Localized
Gold Plate Area)
C
C
L
L
.115 or .145
[2.92 or 3.68]
(See Note 1)
.310 .010
[7.88 0.25]
.115
[2.92]
(See Note 2)
.115 or .145
[2.92 or 3.68]
(See Note 2)
Related Product Data
Mateable Headers — pages 198, 199
Keying Plug
Performance Specifications —
Standard Solder Tails
Board Retention Tails
page 194
.310 .002
[7.87 0.05]
.065 .005
[1.65 0.13]
to
.100 .005
[2.54 0.13]
Technical Documents — page 276
Product Specification
108-25017
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult TE.
.100 .003
[2.54 0.08]
.035 .003
Typ. Dia.
[0.89 0.08]
(Finished Hole)
Part No. 86286-1
(Plugs into receptacle contact)
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Material — Natural color nylon
Tolerances not to accumulate within
one connector pattern.
5
Receptacle Assembly Part Nos.
Receptacle Assembly Part Nos.
with .115 [2.92] Solder Tail Lengths
with .145 [3.68] SolderTail Lengths
Dimensions
No. of
Pos.
Standard Solder Tails
Board Retention Tails
Standard SolderTails
A
B
Plating A
5-532956-1
—
Plating B
5-532955-1
7-532955-5
—
Plating A
5-534204-2
—
Plating B
5-534975-5
—
Plating A
5-533009-1
12
14
16
20
24
30
36
40
50
60
70
72
80
86
90
96
.858 [21.79]
.958 [24.33]
.500 [12.70]
.600 [15.24]
—
—
—
—
1.058 [26.87]
1.258 [31.95]
1.458 [37.03]
1.758 [44.65]
2.058 [52.27]
2.258 [57.35]
2.758 [70.05]
3.258 [82.75]
3.758 [95.45]
3.858 [97.99]
4.258 [108.15]
4.558 [115.77]
4.758 [120.85]
5.058 [128.47]
5.258 [133.55]
5.758 [146.25]
6.258 [158.95]
6.758 [171.65]
10.258 [260.55]
.700 [17.78]
.900 [22.86]
5-532956-2
5-532956-3
5-532956-4
5-532956-5
5-532956-6
5-532956-7
5-532956-8
5-532956-9
6-532956-0
6-532956-1
6-532956-2
6-532956-3
6-532956-4
6-532956-5
6-532956-6
6-532956-7
6-532956-8
7-532956-0
7-532956-3
6-534204-0
5-534204-9
6-534204-1
5-534204-4
5-534204-3
6-534204-2
5-534204-1
5-534204-5
6-534204-3
6-534204-4
5-534204-8
—
6-534975-5
5-534975-6
5-534975-7
5-534975-8
5-534975-9
6-534975-0
6-534975-1
6-534975-2
6-534975-3
—
5-532955-3
5-532955-4
5-532955-5
5-532955-6
5-532955-7
5-532955-8
5-532955-9
6-532955-0
6-532955-1
6-532955-2
6-532955-3
6-532955-4
6-532955-5
6-532955-6
6-532955-7
6-532955-8
7-532955-0
7-532955-3
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.500 [88.90]
3.900 [99.06]
4.200 [106.68]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.400 [137.16]
5.900 [149.86]
6.400 [162.56]
9.900 [251.46]
5-533009-5
—
—
5-533009-8
5-533009-9
6-533009-0
—
6-533009-2
6-533009-3
—
6-533009-5
6-533009-6
—
6-533009-8
—
6-534975-4
—
—
—
—
6-534204-5
5-534204-6
6-534204-6
5-534204-7
6-534204-7
7-534204-0
100
110
120
130
200
5-534975-1
—
5-534975-2
—
5-534975-4
—
Notes: 1. .115 [2.92] tail length is for use with .062 [1.57] PC boards; .145 [3.68] tail length is for use with .093 [2.36] PC boards.
Notes: 2. Receptacle assemblies with low force contacts are available, consult TE.
3. .256 [6.50] minimum positive pin stop to prevent shorting between rows.
Note: All part numbers are RoHS compliant.
195
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Double-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline (Continued)
.115
[2.92]
Vertical Mount
(with Guide Pin Slots and
Standoffs)
.129
Typ.
[3.28]
.410
[10.41]
.320
[8.13]
.125
[3.18]
(Localized
Gold Plate Area)
Material and Finish
.179
[4.55]
.008
B
Typ.
[
0.20]
.100
[2.54]
Typ.
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.238
[6.05]
Contacts — Phosphor bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050-.000100
[0.00127-0.00254] matte tin on solder
area, with entire contact underplated
.000050 [0.00127] nickel
.144
[3.68]
Dia.
.069
[1.75]
Typ.
.100
[2.54]
.100
[2.54]
A
Related Product Data
.100 .003
[2.54 0.08]
Mateable Headers — pages 198, 199
Performance Specifications —
page 194
.035 .003
[0.89 0.08]
.100 .003
[2.54 0.08]
Typ. Dia.
Technical Documents — page 276
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Product Specification
108-25017
Tolerances not to accumulate within one
connector pattern.
Application Specification
114-9009
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult TE.
5
Dimensions
No. of
Pos.
Receptacle Assembly
Part Nos.
A
B
30
40
50
60
70
80
90
100
120
1.758 [44.65]
2.258 [57.35]
2.758 [70.05]
3.258 [82.75]
3.758 [95.45]
4.258 [108.15]
4.758 [120.85]
5.258 [133.55]
6.258 [158.95]
1.400 [35.56]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.900 [99.06]
4.400 [111.76]
4.900 [124.46]
5.900 [149.86]
5-534972-1
5-534972-2
5-534972-3
5-534972-4
5-534972-5
5-534972-6
5-534972-7
5-534972-8
6-534972-0
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
196
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Receptacle Assemblies, Board Mount, Triple-Row,
Closed Entry, .100 x .100 [2.54 x 2.54] Centerline
Horizontal Mount
(with Guide Pin Slots and
Standoffs)
A
.410
[10.41]
.125
[3.18]
(Localized
Gold Plate Area)
.179
[4.55]
Typ.
B
.100
[2.54]
Typ.
.100
Material and Finish
[2.54]
.338
Housing — Glass-filled thermoplastic,
[8.59]
.100
[2.54]
black, 94V-0 rated
.115
[2.92]
.145
[3.68]
.144
[3.66]
Dia.
.069
[1.75]
Contacts — Phosphor bronze, plated
.000030 [0.00076] gold in mating area,
.000050-.000100 [0.00127-0.00254]
matte tin on solder area, with entire
contact underplated .000050 [0.00127]
nickel
Typ.
.300
[7.62]
.400
[10.16]
Related Product Data
Mateable Headers — page 201
Performance Specifications —
page 194
.115
[2.92]
.145
[3.68]
Tail Length
Technical Documents — page 276
.035 .003
[0.89 0.08]
Typ. Dia.
.100 .003
[2.54 0.08]
Product Specification
108-25017
Application Specification
114-9009
.400
[10.16]
Additional receptacle assembly
sizes and solder tail lengths
are available; minimum order
quantities may apply. Consult TE.
.300
[7.62]
5
.065 .005
[1.65 0.13]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one
connector pattern.
Dimensions
B
Receptacle Assembly Part Nos.
Plating A
No. of
Pos.
A
72
93
96
150
210
2.658 [67.51]
3.358 [85.29]
3.458 [87.83]
5.258 [133.55]
7.258 [184.35]
2.300 [58.42]
3.000 [76.20]
3.100 [78.74]
4.900 [124.46]
6.900 [175.26]
5-534974-3
15-534974-4
1-5-534974-5
1-5-534974-8
6-534974-1
Keying Plug
Part No. 86286-1
(Plugs into receptacle contact)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
197
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Pos.
Solder Posts and
ACTION PIN Posts
(with Pin Protection
and Guide Pins)
Ref.
.065
R
[1.66]
(2 Plc.)
1
2
3
.100
[2.54]
.515
[13.08]
.085
[2.16]
.040
[1.02]
(4 Sides)
.130
[3.30]
(2 Plc.)
.200
[5.08]
B
A
.200
[5.08]
(Localized
Gold Plate
Area)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
.110
[2.79]
.320
[8.13]
.440
[11.18]
.090
[2.29]
.130
[3.30]
Board Retention Tails
(where indicated)
.180
[4.57]
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
.180
[4.57]
.040 .003
[1.02 0.08]
(Finished Hole)
.100 .003
[2.54 0.08]
.0453 .001
[1.02 0.03]
(Drilled Hole)
Plating C — Selectively plated .000030
[0.00076] gold on contact area and
.000015 [0.00038] gold on termination
end, with gold flash over .000050
[0.00127] nickel on entire post
.100 .003
[2.54 0.08]
.025 [0.64] Square
Board Retention Tails
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Tolerances not to accumulate within one connector pattern.
Related Product Data
Mateable Receptacles —
5
pages 195, 196
Header Part Nos. with .180 [4.57] Tail Length
Standard Solder Tails Board Retention Tails
Plating A Plating B
5-102692-1 5-102567-1
Dimensions
No. of
Pos.
Performance Specifications —
page 194
ACTION PIN Posts —pages 150, 151
Application Tooling —pages 152
A
B
Plating A
6-534978-6
—
Plating B
5-534257-5
—
12
14
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.380 [35.05]
1.580 [40.13]
1.880 [47.75]
2.180 [55.37]
2.380 [60.45]
2.880 [73.15]
3.380 [85.85]
3.880 [98.55]
3.980 [101.09]
4.380 [111.25]
4.680 [118.87]
4.880 [123.95]
5.180 [131.57]
5.380 [136.65]
5.880 [149.35]
6.380 [162.05]
6.880 [174.75]
10.380 [263.65]
.500 [12.70]
.600 [15.24]
.700 [17.78]
—
7-102567-3
—
16
6-102692-5
6-102692-6
5-102692-2
6-102692-7
5-102692-3
6-102692-3
5-102692-4
5-102692-5
6-102692-4
6-102692-8
5-102692-6
6-102692-9
6-102692-2
5-102692-7
5-102692-8
6-102692-0
5-102692-9
7-102692-0
6-102692-1
5-534978-2
5-534978-3
5-534978-4
5-534978-5
5-534978-6
5-534978-7
5-534978-8
5-534978-9
6-534978-5
6-534978-0
6-534978-1
—
6-534257-4
5-534257-6
5-534257-7
5-534257-8
5-534257-9
6-534257-0
6-534257-5
6-534257-1
6-534257-2
—
Technical Documents — page 276
20
.900 [22.86]
6-102567-1
5-102567-2
6-102567-3
5-102567-3
6-102567-2
5-102567-6
5-102567-4
6-102567-0
6-102567-6
5-102567-8
6-102567-7
6-102567-4
5-102567-5
5-102567-9
6-102567-5
5-102567-7
6-102567-9
7-102567-1
Product Specification
108-25017
Application Specification
114-9009
24
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.500 [88.90]
3.900 [99.06]
4.200 [106.68]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.400 [137.16]
5.900 [149.86]
6.400 [162.56]
9.900 [251.46]
30
36
40
50
Additional header sizes are
available; minimum order
quantities may apply. Consult TE.
60
70
72
80
5-534257-1
—
86
90
—
—
96
6-534978-7
6-534978-8
6-534978-2
6-534978-3
6-534978-9
5-534978-1
—
100
110
120
130
200
5-534257-2
—
5-534257-3
—
6-534257-9
Note: Headers with make first/break last posts can be made available, consult TE.
Note: All part numbers are RoHS compliant.
198
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline (Continued)
See chart
below
.025 [0.64] Square
ACTION PIN Tails
Header Part Nos. with ACTION PIN Posts
Dimensions
No. of
Pos.
.250 [6.35] Tail Length .480 [12.19] Tail Length
.680 [17.27] Tail Length
A
B
Plating A
5-102690-1 5-103291-4
5-103291-3
Plating B
Plating A
Plating C
Plating C
12
14
20
24
36
40
50
60
70
80
90
96
.980 [24.89]
1.080 [27.43]
1.380 [35.05]
1.580 [40.13]
2.180 [55.37]
2.380 [60.45]
2.880 [73.15]
3.380 [85.85]
3.880 [98.55]
.500 [12.70]
.600 [15.24]
.900 [22.86]
1.100 [27.94]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6-102690-3 5-103291-6
5-102690-2 5-103291-7
5-102690-3 5-103291-9
6-102690-6 5-103291-2
5-102690-4 6-103291-0
5-102690-5 6-103291-1
6-102690-7 6-103291-2
5-102690-6 6-103291-4
6-102690-1 6-103291-6
5-102690-7 6-103291-8
5-102690-8 6-103291-9
—
—
—
4.380 [111.25] 3.900 [99.06]
4.880 [123.95] 4.400 [111.76]
5.180[131.57] 4.700 [119.38]
—
100 5.380 [136.65] 4.900 [124.46]
120 6.380 [162.05] 5.900 [149.86]
130 6.880 [174.75] 6.400 [162.56]
102777-3
102777-1
—
5-102690-9 7-103291-1 5-102691-9 1-102666-1
102666-9
—
—
—
Notes: 1. Other header sizes can be made available upon request.
Headers with ACTION PIN posts are for use with .093 [2.36] nominal or thicker PC boards.
2. Application tooling for installing headers with ACTION PIN posts is shown on pages 152 and 153.
3. Headers with .250 [6.35] tail length can be made available with make first/break last contacts,
consult TE.
4. Plated through holes to be prepared per recommendations found on page 151.
5
Note: All part numbers are RoHS compliant.
199
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Headers, Right-Angle Post, Double-Row, .100 x .100 [2.54 x 2.54]
Centerline
Card Extender
(with Pin Protection
and Guide Pins)
.762
Max.
[19.35]
.599
[15.21]
.040
[1.02]
Typ.
A
.320
[8.13]
Material and Finish
.100
[2.54]
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.320
[8.13]
Posts — Phosphor bronze, plated as
.100
[2.54]
(Localized
Gold Plate
Area)
.065
[1.65]
(2 Plc.)
follows:
R
.125
[3.18]
2
3 4
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Board Retention Tails
(where indicated)
Pos.
Ref.
.157
[3.99]
.100
[2.54]
.200
[5.08]
Typ.
B
.185
[4.70]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
.040 .003
.100 .003
[2.54 0.08]
[1.02 0.08]
(Finished
Hole
.157
[3.99]
.125
[3.18]
w/Bd. Ret.)
.035 .003
[0.89 0.08]
Dia. Typ.
Related Product Data
(Standard
Finished Hole)
.100 .003
[2.54 0.08]
.025 [0.64] Square
Board Retention Tails
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
5
Tolerances not to accumulate within one
connector pattern.
Technical Documents — page 276
Product Specification
108-25017
Application Specification
Header Part Nos. with .125 [3.18] Tail Length
Standard Solder Tails Board Retention Tails
114-9009
Dimensions
No. of
Pos.
A
B
Plating A
Plating B
5-102589-8
—
Plating A
5-534245-5
5-534245-4
5-534245-6
5-534245-7
5-534245-2
5-534245-8
—
Additional header sizes are
available; minimum order
quantities may apply. Consult TE.
12
16
20
24
30
36
40
50
60
72
80
90
100
120
130
.980 [24.89]
1.180 [29.97]
1.380 [35.05]
1.580 [40.13]
1.880 [47.75]
2.180 [55.37]
2.380 [60.45]
2.880 [73.15]
3.380 [85.85]
3.980 [101.09]
4.380 [111.25]
4.880 [123.95]
5.380 [136.65]
6.380 [162.05]
6.880 [174.75]
.500 [12.70]
.700 [17.78]
.900 [22.86]
6-102802-2
6-102802-4
6-102802-5
6-102802-3
6-102802-6
5-102802-3
5-102802-8
5-102802-4
5-102802-9
6-102802-7
5-102802-5
6-102802-0
5-102802-6
5-102802-2
6-102802-9
6-102589-2
5-102589-6
5-102589-4
5-102589-2
6-102589-3
5-102589-5
5-102589-7
6-102589-7
5-102589-1
6-102589-4
5-102589-3
6-102589-1
6-102589-9
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.500 [88.90]
3.900 [99.06]
4.400 [111.76]
4.900 [124.46]
5.900 [149.86]
6.400 [162.56]
5-534245-1
—
—
6-534245-0
—
6-534245-1
5-534245-3
6-534245-3
Note: Headers with make first/break last posts can be made available, consult TE.
Note: All part numbers are RoHS compliant.
200
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Headers, Straight Post, Triple-Row, .100 x .100 [2.54 x 2.54] Centerline
Pos.
Solder Posts
Ref.
.065
R
(with Pin Protection
and Guide Pins)
[1.65]
1
2
3
(2 Plc.)
.100
[2.54]
.615
[15.62]
.100
[2.54]
.085
[2.16]
.040
.200
[5.08]
B
A
[1.02]
(4 Sides)
Material and Finish
Housing — Glass-filled thermoplastic,
.200
[5.08]
(Localized
Gold Plate
Area)
black, 94V-0 rated
.210
[5.33]
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
.090
[2.29]
.440
[11.18]
.320
[8.13]
.180
[4.57]
Board Retention Tails
(where indicated)
Related Product Data
.0453 .001
[1.151 0.03]
(Drilled Hole)
Mateable Receptacles — page 197
Performance Specifications —
page 194
.040 .003
[1.66 0.08]
(Finished Hole)
.200
[5.08]
.180
[4.57]
Technical Documents — page 276
Product Specification
108-25017
.100
[2.54]
.100 .003
[2.54 0.08]
Application Specification
114-9009
.025 [0.64] Square
Board Retention Tails
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
Additional header assembly sizes
are available; minimum order
quantities may apply. Consult TE.
5
Tolerances not to accumulate within one
connector pattern.
Header Part Nos.
with .180 [4.57] Tail Length
Dimensions
No. of
Pos.
Standard
Solder Tails
Plating A
Board
Retention Tails
Plating A
A
B
72
96
2.780 [70.61]
3.480 [88.39]
2.300 [58.42]
3.000 [76.20]
5-103264-1
—
5-534258-1
5-534258-3
150
210
5.380 [136.65] 4.900 [124.46]
7.380 [187.45] 6.900 [175.26]
5-103264-3
5-103264-4
—
—
Note: All part numbers are RoHS compliant.
201
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Headers, VRM (Voltage Regulator Module),
.100 x .100 [2.54 x 2.54] Centerline
Solder Posts and
A
B
ACTION PIN Posts (with
Pin Protection, Guide
Ribs, and Latching)
.515
[13.08]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
.110
[2.79]
Posts — Copper alloy, duplex plated
.000030 [0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
.120
[3.05]
.320
[8.13]
.440
[11.18]
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
Housing Outline
B
ACTION PIN Posts —
page 150, 151
.100
[2.54]
Application Tooling —
pages 152
.125
[3.18]
.290
[7.37]
.040 +.003
[1.02 +.08]
.100
[2.54]
.525
[13.33]
Technical Documents — page 276
Recommended PC Board Hole Layout
Product Specification
108-25017
Application Specification
114-9009
5
No
of
Pos
Header Part No.
Dimensions
Standard Solder Tails
.250 Length ACTION PIN Tails
A
B
30
2.450 [62.23]
3.095 [78.62]
3.100 [78.74]
1.400 [35.56]
1.900 [48.26]
1.900 [48.26]
5-146205-1
—
—
5-147254-1
—
40
5-146315-1
Note: All part numbers are RoHS compliant.
202
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Accessories: End Shrouds for Machine-Applied Posts
Mating Polarized
Housing
Single-Row, .100 [2.54] Centers
Part No. 102338-1
Material — Black thermoplastic, flame
retardant
.066
[1.68]
.164
[4.17]
.290
[7.37]
End
Shroud
.050
[1.27]
.712
[18.08]
.059
[1.50]
Max.
.350
[8.89]
Board Mounted
Straight Posts
PC Board
Typical Assembly
Break Line for 7 Pos.
or Larger Header
.066
[1.68]
.029
[0.74]
Dia.
Technical Documents — page 276
Double-Row, .100 x .100 [2.54 x 2.54] Centers
Part No. 102114-1
Material — Black glass-filled
polyester
5
.405
[10.29]
.280
[7.11]
.050
[1.27]
.150
[3.81]
.890
[22.61]
.059
[1.50]
Max.
.350
[8.89]
Break Line for 14 Pos.
or Larger Header
.029
[0.74]
Dia.
.066
[1.68]
Note: All part numbers are RoHS compliant.
203
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
te.com
AMPMODU Interconnection System
Accessories: Barrier Insert, Part No. 87743-1
.340
[8.64]
.446
[11.33]
Material
Black polyester
.037
[0.94]
.030
[0.76]
.090
[2.29]
Technical Documents — page 276
The barrier insert can be
used on double row headers
(.100 x .100 [2.54 x 2.54]
centers), including shrouded
versions—3 and 4 sides,
as well as unshrouded
straight post headers. With
one barrier insert several
configurations can be
obtained, providing headers
with capabilities of accept-
ing various combinations of
polarized and non-polarized
AMPMODU connectors.
.031-.043
[0.79-1.09]
Dia. x .250[
[6.35]
.030
[0.76]
.314
[7.98]
.127
[3.23]
Deep—
remainder
.029 .001
[0.74 0.03]
Dia.
.100
[2.54]
.087
[2.21]
Thru Typ. (2)
45°
.094
[2.39]
.047
[1.19]
Barrier Insert Cutoffs
For unshrouded headers,
the barrier insert is used
to establish polarization
and to compartmentalize
the header. For shrouded
headers, the barrier insert is
used to compartmentalize
the header, while maintaining
polarization. The barrier
insert itself is notched to
facilitate cutting off the
ends with a simple tool
such as tin snips or scissors
to achieve the desired
configuration.
Fig. 1
Partial Cutoff
(Left and Right Sides)
Fig. 2
Partial Cutoff
(Left Side)
Complete Cutoff
(Right Side)
Fig. 3
Complete Cutoff
(Left Side)
Partial Cutoff
(Right Side)
Fig. 4
Complete Cutoff
(Left and Right Sides)
Typical Barrier Insert Applications
For Unshrouded Double-Row, Straight Post Headers,
.100 x .100 [2.54 x 2.54] Centers
5
See Fig. 3
See Fig. 4
See Fig. 1
See Fig. 2
Note: All configurations of barrier inserts compartmentalize headers and maintain polarization,
except bar (Fig. 4) configuration, which is used primarily for compartmentalizing headers.
For Shrouded Double-Row, 3 and 4 Sided Headers,
.100 x .100 [2.54 x 2.54] Centers
See Fig. 2
See Fig. 4
See Fig. 1
See Fig. 3
Note: Right-angle (Figs. 2 and 3) and “T” (Fig. 1) configurations of barrier insert establish
polarization; bar (Fig. 4) configuration of barrier insert compartmentalizes header.
Note: All part numbers are RoHS compliant.
204
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Material
Black thermoplastic, flame retardant
.134
[3.40]
Part Numbers
499991-2 (Packaged 50 per bag)
.335
[8.51]
499991-3 (Packaged 1000 per bag)
Break Line
(See below.)
Related Product Data
Low Profile Headers used with —
pages 135-140
Break Line
(See below.)
.335
[8.51]
.134
[3.40]
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
5
Break Line
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
Note: For Post Shunts, contact TE.
Note: All part numbers are RoHS compliant.
205
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Locking Clip Contacts and Housings
Product Facts
I Self-retaining contacts
provide permanent
connection with quick
connect and disconnect
I Fast, easy installation with
no additional locking
hardware required
I Mates with .025 [0.64]
square posts in a variety
of configurations
I Single- and double-row
configurations in up to
20 positions on .100 [2.54]
centers
I Modular design permits
end-to-end stacking
(double- row only) for
circuit grouping
I Choice of tin or select gold
plating
I Housings made of 94V-0
rated glass-filled polyester
I Recognized under the
Component Program
of Underwriters
R
Laboratories Inc.,
File No. E28476
Typical Application
I Certified by Canadian
Standards
Single
Contact
(Page 207)
R
Association,
File No. LR 7189
Both Ends
Closed
(for specified
5
Performance
Left End
Open (for
stacking to
left side)
Single Row
no. of circuits—
Both Ends
Characteristics
housing size)
Closed
(Page 209)
(Page 208)
Contact Current Rating —
3 amperes
(Page 209)
Termination Resistance —
12 milliohms (max.) — Gold plated
contacts
16 milliohms (max.) — Tin plated
contacts
Right End
Open (for
stacking to
right side)
(Page 209)
PC Board
Durability — Ref. Product
Specification 108-36028 and
108-36028-1
.100 x .100
[2.54 x 2.54]
.200/.277*
[5.08/7.04]
(without
Extraction
housing
Tool Slot
Contact
Clearance
Hole
.025
[0.64]
Sq. Posts
.273/.350*
[6.93/8.89]
(with housing)
*If post is longer than maximum specified, post tip may butt against wire ends.
Dimension defines .025 x .025 [0.64 x 0.64] portion of post.
206
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Locking Clip Contacts
Wire Crimp Contacts
with Insulation Support
Body
Material and Finish
Contact Spring — Stainless steel
Pating A — Selectively plated
.000050 [0.00127] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Spring
A
Pating B — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Pating C — .000100-.000200
[0.00254-0.00508] bright tin over
.000050 [0.00127] nickel on entire
contact
Heavy Duty Miniature
Applicator for
AMP-O-LECTRIC
Machine*
Wire Size
Range
Ins.
Hand
Tool
No.
Part Nos.
Strip Form
Dimension
A
Dia.
Finish
Loose Piece
Range
AWG
[mm2]
Plating B
Plating C
Plating A
Plating B
Plating C
Plating B
Plating C
87190-1
5-87190-2
87124-3
87191-1
5-87191-2
87165-3
87165-1
5-87165-2
—
30-28
0.05-0.09
.029-.039 [0.74-0.99]
.038-.062 [0.97-1.57]
.038-.062 [0.97-1.57]
.550 [13.97]
.584 [14.83]
.584 [14.83]
567310-2
466721-2
679996-2
90295-1
91533-1
90431-1
26-22
20
0.12-0.4
0.5-0.6
87124-1
5-87124-2
867052-2
5-867052-1
—
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. These contacts must be crimped in accordance with TE Specification No. 114-25006 in order to function properly in a connector housing.
2. Extraction Tool No. 91084-1 is used for removing individual contacts from connector housings and for detaching contacts from mating posts.
Related Product Data
Housings Used With —
5
pages 208, 209
Application Tooling — page 272
Technical Documents
pages 277, 278
—
Wire Harnessing
Fixed
Clamp
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing.
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
Unrestricted
Wires for
Free-Floating
Contacts
Cable
Tie
For more information
request Insulation and
Bundling Products Catalog
124132.
Extraction Tool
No. 91084-1
Note: All part numbers are RoHS compliant.
207
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Wire-Applied Housings for Locking Clip Contacts,
Single-Row, .100 [2.54] Centerline
.060
[1.52]
Single-Row
.700
[17.78]
.350
.273
(Post
Length)
8.89
[6.93]
Material
Glass-filled polyester, 94V-0 rated
.025 [0.64]
Sq. Post
(Shown for
Ref. only)
.145
[3.68]
Related Product Data
A
Contacts — page 207
.175
[4.44]
C
Typ.
Mateable Headers and Posts —
Refer to the Mating Post Selection
Guide — page 90
.085
[2.16]
.100
Typ.
Technical Documents
pages 277, 278
—
[2.54]
B
Product Specification
108-36028, 108-36028-1
Note: Housing illustrated above is the “Both Ends Closed” version.
Application Specification
114-25006
.125 [3.18] centerline single-row,
2 and 3 position housings are
available, Base Part No. 104905.
They are designed to be stackable
end-to-end and side-by-side.
Consult TE.
5
Housing Part No.
Unstamped Stamped
No. of
Pos.
1
2
Dimensions
B
A
C
.108 [2.74]
.216 [5.49]
.316 [8.03]
—
.054 [1.37]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
.058 [1.47]
87175-2
87175-6
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
—
3
87175-8
—
4
.416 [10.57]
.516 [13.11]
.616 [15.65]
.716 [18.19]
.816 [20.73]
.916 [23.27]
1.016 [25.81]
1.116 [28.35]
1.216 [30.89]
1.316 [33.43]
1.416 [35.97]
1.516 [38.51]
1-87175-0
1-87175-2
1-87175-4
1-87175-6
1-87175-8
2-87175-0
2-87175-2
2-87175-4
2-87175-6
2-87175-8
3-87175-0
87175-4
—
5
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
—
6
1-87175-3
1-87175-5
1-87175-7
1-87175-9
2-87175-1
2-87175-3
2-87175-5
2-87175-7
2-87175-9
87175-3
7
8
Keying Plug
9
10
11
12
13
14
15
Part No. 87179-1
(Plugs directly into housings for
.025 [0.64] square post contacts)
Material — Yellow, nylon
Note: All part numbers are RoHS compliant.
208
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Wire-Applied Housings for Locking Clip Contacts,
Double-Row, .100 x .100 [2.54 x 2.54] Centerline
.300
[7.62]
Double-Row
.700
[17.78]
Max.
.350
[8.89]
(Post Length)
Material
Glass-filled polyester, 94V-0 rated
.025 [0.64]
Sq. Post
A
(Shown for
Ref. only)
.270
[6.86]
.100
[2.54]
Related Product Data
Typ.
.100
[2.54]
Contacts — page 207
Mateable Headers and Posts —
Refer to the Mating Post Selection
Guide — page 90
.058
[1.47]
Technical Documents
—
B
pages 277, 278
Note: Housing illustrated above is the “Both Ends Closed” version.
Product Specification
108-36028, 108-36028-1
Application Specification
114-25006
Both Ends Closed
5
Key
Keyway
Right End Open
Left End Open
Housing Part No.
Housing
Configuration
No. of
Pos.
2
4
Dimensions
A
B
—
Unstamped
87176-2
87133-1
87133-7
87133-9
87133-2
1-87133-1
1-87133-3
1-87133-5
87133-3
87132-1
87132-2
87132-3
87131-1
87131-2
87131-3
Stamped
.116 [2.95]
.216 [5.49]
—
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.700 [17.78]
.800 [20.32]
.900 [22.86]
.100 [2.54]
.400 [10.16]
.900 [22.86]
.100 [2.54]
.400 [10.16]
.900 [22.86]
—
Keying Plug
6
.316 [8.03]
87133-8
1-87133-0
87133-5
1-87133-2
1-87133-4
1-87133-6
87133-6
—
8
.416 [10.57]
.516 [13.11]
.616 [15.65]
.816 [20.73]
.916 [23.27]
1.016 [25.81]
.216 [5.49]
Both Ends Closed
10
12
16
18
20
4
Right End Open
Left End Open
10
20
4
.516 [13.11]
1.016 [25.81]
.216 [5.49]
87132-5
87132-6
—
Part No. 87179-1
(Plugs directly into housings for
.025 [0.64] square post contacts)
10
20
.516 [13.11]
1.016 [25.81]
87131-5
87131-6
Material — Yellow, nylon
Note: All part numbers are RoHS compliant.
209
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Mod IV Wire-Applied Contacts and Housings
Product Facts
I Terminates 32-20 AWG
[0.03-0.6mm2] discrete wire
I Contacts have insulation
support
I Choice of three contact
mating pressures
I Available in a variety of
gold and tin platings
I Receptacles mate with .025
[0.64] square or round posts
I Dual cantilever contact
beam with built-in
anti-overstress feature
for reliable matings
I Housings accept a variety of
receptacle and pin contacts
I Housing sizes range up to
100 positions
I Housing configurations
include single- and double-
rows on .100 [2.54]
centerlines
I Housing options include
detent latching, polarization
and bonded strain relief/
pull tabs
1-87631-5 D-R Housing, Polarized with Detent
6-87756-6 Std. Pressure Contacts
Wire-to-Board
I Recognized under the
Component Program of
Underwriters
1-87456-5 D-R Housing
6-87756-6 Std. Pressure Contacts
, Plain
102387-1 D-R Ejection Housing,
Center Polarized
6-87756-6 Std. Pressure Contacts
87483-3 D-R Housing with Mounting Ears
6-87756-6 Std. Pressure Contacts
Laboratories Inc.,
R
File No. E28476
102241-8 S-R Housing Polarized with
1825851-1 Latch
5102154-1 Hdr
5
Detent
I Certified by Canadian
102128-1 High Pressure Contacts
Standards
Association,
R
103168-8
Hdr
File No. LR 7189
5-103166-8 Hdr
1-87756-6 Std. Pressure Plain
6-87456-6 D-R Housing, Contacts
3-87977-5 D-R Housing, Polarized
6-87756-6 Std. Pressure Contacts
1-87232-0
Hdr
5-103166-8 Hdr
Performance
Characteristics
1-87499-8 S-R Housing, Plain
102128-1 High Pressure Contacts
5-102202-7 Hdr
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — Beryllium
copper contacts
20 milliohms (max.) — Copper-tin-
phosphor bronze contacts
Durability — Ref. Product
Specification 108-25020
Note: All part numbers are RoHS compliant.
210
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Pin and Receptacle Contacts
Crimp Snap-In (No-strip)
Receptacles and Crimp
Snap-In Pins with
.058
[1.47]
No-Strip
Receptacle
Pin with
Insulation Support
.815
[20.70]
Insulation Support
.470
.165
(Standard Pressure)
[11.94]
[4.19]
.016
[0.41]
Gap Max.
.068
[1.73]
Crimp Snap-In (No-strip) Receptacles
Heavy Duty Miniature
Applicator No.
for AMP-O-LECTRIC
Machine*
Ins.
Dia.
Range
Hand
Tool
Part No.
Part Nos.
Finish
Strip Form
Loose Piece
Plating A
Plating C
87107-5
87107-6
102348-2
102348-3
.040-.055 [1.02-1.40]
567307-2
90381-1
Standard Pressure
Configuration
Material and Finish
Crimp Snap-In Pins with Insulation Support
Beryllium copper, phosphor bronze, or
copper-tin-phosphor bronze (see
charts), plated as follows:
Plating A — Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Wire
Hand
Tool
Heavy Duty Miniature
Ins.
Part Nos.
Size
Applicator No.
for AMP-O-LECTRIC
Machine*
Dia.
Finish
Range
Part No.
Strip Form
Loose Piece
(Max.)
AWG
[mm2]
Premium Commercial
Plating A
Plating B
Plating C
102095-3
102095-2
5-102095-4
102107-2
102107-1
5-102107-3
.061
[1.55]
26-22 0.12-0.4
466812-2
91517-1
58641-1†
Plating B — Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire
contact
*For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos.
of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench
machines and fully automatic AMPOMATOR lead making machines.
†PRO-CRIMPER II hand tool frame with die set assembly.
Die Set Part No. 58641-2
5
Related Product Data
Housings Used With —
pages 214-220
Performance Characteristics —
page 210
Application Tooling —
page 270-272
Technical Documents
pages 276-278
—
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Additional header sizes are
available; minimum order
quantities may apply.
Consult TE.
Note: All part numbers are RoHS compliant.
211
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Contacts
Crimp Snap-In Receptacles
with Insulation Support
(Standard, Intermediate
and High Pressure)
Standard Pressure
A
.058
[1.47]
Material and Finish
Beryllium copper, phosphor bronze or
copper-tin-phosphor bronze (see charts,
on following page), plated as follows:
A
.165
[4.19]
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on crimp
area, with entire contact underplated
.000050 [0.00127] nickel
.068
[1.73]
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100-
.000200 [0.00254-0.00508] tin on crimp
area, with entire contact underplated
.000050 [0.00127] nickel
Intermediate Pressure
A
Plating D — Selectively plated .000050
[0.00127] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating E — Selectively plated .000030
[0.00076] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating F — Selectively plated .000015
[0.00038] gold on contact area, with gold
flash over .000050 [0.00127] nickel on
entire contact
Plating G — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00076] nickel on entire contact
High Pressure
A
Related Product Data
5
Housings Used With —
pages 214-220
Performance Characteristics —
page 210
Application Tooling —
pages 270-272
Technical Documents
pages 277, 278
—
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
Mating Force
9 oz. Max.
Unmating Force
1.5 oz. Min.
2 oz. Min.
A-Gap Dimension
.008/.014
Standard Pressure
Intermediate Pressure
High Pressure
16 oz. Max.
20 oz. Max.
.008/.014
3 oz. Min.
.013 .002
212
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Receptacle Contacts (Continued)
Standard Pressure (Mod IV)
Wire
Hand
Tool
Heavy Duty Miniature Applicator for
Ins.
Size
Part Nos.
Strip Form Loose Piece
Dimension
A
Applicator for
AMP-O-LECTRIC
Machine*
Stripper/
Crimper
Machine
Dia.
Material
Finish
Range
AWG [mm2]
Part Nos.
(Max.)
Premium
Commercial
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Plating A 5-102316-8
Plating B 5-102316-6
Plating D 1-102917-1
6-102316-4
6-102316-3
1-102917-2
102917-2
102917-6
1-102316-2
6-87756-8
6-87756-6
87756-7
87667-5
87667-2
87667-5
87667-3
32-27 0.03-0.1 .040 [1.02] .445 [11.30]
466655-2
466571-2
466562-2
466921-1
466918-1
466905-1
91541-1
91517-1
91516-1
—
Be Cu
Be Cu
Plating E
Plating F
102917-1
102917-5
102316-5
6-87756-7
6-87756-2
87756-6
Cu-Sn-Ph Bz Plating G
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Cu-Sn-Ph Br
Be Cu
Plating A
Plating B
Plating G
Plating D
Plating E
Plating F
Plating G
Plating A
Plating B
Plating E
Plating F
Plating G
Plating G
26-22 0.12-0.4
1-87666-6
87666-2
58641-1†
.061 [1.55] .445 [11.30]
Be Cu
Be Cu
Be Cu
87666-5
87666-3
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Be Cu
Cu-Sn-Ph Br
Be Cu
6-87523-8
2-87523-3
85969-8
6-87523-9
2-87523-4
86016-2
86016-5
87523-6
24-20 0.2-0.6
.069 [1.75] .470 [11.94]
—
85969-6
87523-5
85969-9
86016-3
Intermediate Pressure (Mod IV.v)
Wire
Hand
Heavy Duty Miniature Applicator for
Ins.
Size
Part Nos.
Strip Form Loose Piece
Tool
Dimension
A
Applicator for
AMP-O-LECTRIC
Machine*
Stripper/
Crimper
Machine
Dia.
Material
Finish
Range
AWG [mm2]
Part Nos.
(Max.)
Premium
Commercial
Cu-Sn-Ph Bz
Be Cu
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Plating A 5-102920-1 5-102920-2
Plating E 102918-1 102918-2
Plating A 5-103171-4 5-103171-5
Plating B 5-103171-1 5-103171-2
32-27 0.03-0.1 .040 [1.02]
26-22 0.12-0.4 .061 [1.55]
.445 [11.30]
.445 [11.30]
466655-2
466921-1
91541-1
91517-1
—
466571-2
466918-1
58641-1†
Plating E
Plating F
Plating A
Plating B
Plating E
Plating F
Plating G
102548-5
102548-1
2-87195-3
2-87195-4
86492-6
102548-6
102548-3
2-87195-6
2-87195-5
87046-3
Be Cu
Cu-Sn-Ph Bz
Cu-Sn-Ph Bz
Be Cu
Be Cu
Be Cu
5
24-20 0.2-0.6
466562-2
466905-1
91516-1
—
.069 [1.75]
.470 [11.94]
86492-2
86492-9
87046-1
87046-4
High Pressure (Mod V)**
Wire
Heavy Duty Miniature
Applicator for
AMP-O-MATIC
Hand
Tool
Ins.
Size
Part Nos.
.
Dimension
Applicator for
AMP-O-LECTRIC
Machine*
Dia
Material
Finish
Range
A
Stripper/Crimper Part Nos.
Machine
(Max.)
AWG
[mm2]
Strip Form Loose Piece
32-27 0.03-0.1
.040 [1.02]
.061 [1.55]
.445 [11.30]
Ph Bz
Ph Bz
Ph Bz
Ph Bz
Ph Bz
Plating E
Plating E
Plating G
Plating E
Plating G
103455-1
87809-1
87809-2
87309-9
87309-8
103455-2
102128-1
102128-2
1-87309-4
1-87309-3
466655-2
466921-1
91541-1
26-22 0.12-0.4
.445 [11.30]
.470 [11.94]
466571-2
466918-1
91517-1
24-20 0.2-0.6
.069 [1.75]
466562-2
466905-1
91516-1
**For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
**Contact material is phosphor bronze.
†PRO-CRIMPER II hand tool frame with die set assembly.
Die Set Part No. 58641-2
Note: All part numbers are RoHS compliant.
213
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline
Non-Polarized
.600
[15.24]
.175
[4.45]
Material
A
Max.
Black thermoplastic, flame retardant
.050
[1.27]
Typ.
.003
.003
0.08]
B
C
[
[
0.08]
.070
[1.78]
Typ.
.072
[1.83]
.100
Related Product Data
Typ.
.140
[3.56]
[2.54]
Contacts — pages 211-213
X
X
Mateable Headers and Posts —
pages 93-95, 101-103
Section X-X
Part No.
Technical Documents
pages 277, 278
—
No. of
Pos.
1
Dimensions
B
A
C
—
—
Stamped*
Unstamped**
7-87499-2
87499-4
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
.105 [2.67]
.205 [5.21]
.305 [7.75]
—
—
2
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40] 1.000 [25.40]
1.100 [27.94] 1.000 [25.40]
1.100 [27.94] 1.100 [27.94]
1.200 [30.48] 1.100 [27.94]
1.200 [30.48] 1.200 [30.48]
1.300 [33.02] 1.200 [30.48]
1.300 [33.02] 1.300 [33.02]
1.400 [35.56] 1.300 [33.02]
1.400 [35.56] 1.400 [35.56]
1.500 [38.10] 1.400 [35.56]
1.500 [38.10] 1.500 [38.10]
1.600 [40.64] 1.500 [38.10]
1.600 [40.64] 1.600 [40.64]
1.700 [43.18] 1.600 [40.64]
1.700 [43.18] 1.700 [43.18]
1.800 [45.72] 1.700 [43.18]
87499-3
3
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
87499-5
87499-6
4
.405 [10.29]
.505 [12.83]
.605 [15.37]
.705 [17.91]
.805 [20.45]
.905 [22.99]
1.005 [25.53]
1.105 [28.01]
1.205 [30.61]
1.305 [33.15]
1.405 [35.69]
1.505 [38.23]
1.605 [40.77]
1.700 [43.18]
1.805 [45.85]
1.900 [48.26]
2.005 [50.93]
2.100 [53.34]
2.205 [56.01]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.605 [66.17]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.005 [76.33]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.98]
3.600 [91.44]
87499-7
87499-8
5
87499-9
1-87499-0
1-87499-2
87499-2
6
1-87499-1
7
87499-1
8
1-87499-3
1-87499-4
1-87499-6
1-87499-8
2-87499-0
2-87499-2
2-87499-4
2-87499-6
2-87499-8
3-87499-0
3-87499-2
3-87499-4
3-87499-6
3-87499-8
4-87499-0
4-87499-2
4-87499-4
4-87499-6
4-87499-8
5-87499-0
5-87499-2
5-87499-4
5-87499-6
5-87499-8
6-87499-0
6-87499-2
6-87499-4
6-87499-6
6-87499-8
7-87499-0
9
1-87499-5
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
1-87499-7
1-87499-9
2-87499-1
2-87499-3
2-87499-5
5
2-87499-7
2-87499-9
—
Keying Plugs
—
—
3-87499-7
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
Note: All part numbers are RoHS compliant.
Part No. 87077-2
(Plugs directly into housing)
214
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline (Continued)
Recessed Area
Polarized (with
Detent Latching)
.175
[4.45]
A
Material
.050
[1.27]
Black thermoplastic, flame retardant
Typ.
.072
[1.83]
.003
.003
C
.600
[15.24]
B
.071
[1.80]
[
0.08]
[
0.08]
X
X
Related Product Data
.182
[4.62]
Contacts — pages 211-213
Mateable Headers and Posts —
pages 115, 116
Flexible Film Connectors,
Single-Row Pin Assemblies —
Catalog 82007
Section X-X
.100
[2.54]
Typ.
.056
[1.42]
.100
[2.54]
Typ.
.127
[3.23]
No. of
Pos.
3
Dimensions
B
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
Part Nos.
Unstamped*
102241-1
A
C
Technical Documents
—
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.100 [78.74]
3.200 [81.28]
3.300 [83.82]
3.400 [86.36]
3.500 [88.90]
3.600 [91.44]
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
pages 277, 278
4
102241-2
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
5
102241-3
6
102241-4
7
.300 [7.62]
102241-5
8
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
1.800 [45.72]
.300 [7.62]
102241-6
9
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
102241-7
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
102241-8
102241-9
1-102241-0
1-102241-1
1-102241-2
1-102241-3
1-102241-4
1-102241-5
1-102241-6
1-102241-7
1-102241-8
1-102241-9
2-102241-0
2-102241-1
2-102241-2
2-102241-3
2-102241-4
2-102241-5
2-102241-6
2-102241-7
2-102241-8
2-102241-9
3-102241-0
3-102241-1
3-102242-2
3-102241-3
3-102241-4
5
Keying Plugs
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Material — Natural color nylon
*No marking on housing.
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
Note: All part numbers are RoHS compliant.
Part No. 87077-2
(Plugs directly into housing)
215
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline
Non-Polarized
.175
[4.45]
A
.100
[2.54]
Typ.
.050
[1.27]
Typ.
Material
.240
[6.10]
B
R
C
X
X
.100
[2.54]
Optional
Black thermoplastic, flame retardant
Related Product Data
Contacts — pages 211-213
Mateable Headers and Posts —
pages 96-99, 104, 105, 117-120
Section X-X
.072
[1.83]
.070
[1.78]
Part Nos.
C = .600 [15.24]
No.
of
Pos.
Technical Documents
—
Dimensions
C = .645 [16.38]
Unstamped**
—
pages 277, 278
A
B
—
Stamped*
—
Unstamped**
5-87456-3
4-87456-9
87456-1
2
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
4
.100 [2.54]
.200 [5.08]
.300 [7.62]
5-87456-0
87456-2
87456-4
87456-6
87456-8
1-87456-0
1-87456-2
1-87456-4
1-87456-6
—
2-86177-5
1-86177-8
2-86177-0
1-86177-2
1-86177-3
1-86177-4
1-86177-5
1-86177-6
86177-1
86177-2
86177-3
86177-4
86177-5
86177-6
86177-7
86177-8
86177-9
1-86177-0
1-86177-1
—
6
8
87456-3
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
50
52
54
56
58
60
64
66
70
72
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.100 [78.74]
3.200 [81.28]
3.400 [86.36]
3.500 [88.90]
87456-5
87456-7
87456-9
1-87456-1
1-87456-3
1-87456-5
1-87456-7
1-87456-9
2-87456-1
2-87456-3
2-87456-5
2-87456-7
2-87456-9
3-87456-1
3-87456-3
3-87456-5
4-87456-3
3-87456-7
5-87456-9
3-87456-9
4-87456-1
4-87456-5
6-87456-1
6-87456-3
5-87456-1
6-87456-5
5-87456-7
5-87456-5
4-87456-7
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
3.600 [91.44]
2-87456-0
2-87456-2
2-87456-4
2-87456-6
2-87456-8
3-87456-0
3-87456-2
—
5
Keying Plugs
3-87456-6
4-87456-4
3-87456-8
6-87456-0
4-87456-0
4-87456-2
—
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
1-86177-7
2-86177-3
2-86177-1
1-86177-9
—
Material — Natural color nylon
—
—
—
—
5-87456-2
6-87456-6
5-87456-4
—
—
—
—
2-86177-4
—
4-87456-8
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Part No. 87077-1
(for .645 high housings)
Part No. 87077-2
(for .600 high housings)
(Plugs directly into housing)
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
Note: All part numbers are RoHS compliant.
216
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Strain Relief Locators
(on Housings 20 Positions
and Larger)
Polarized
.175
[4.45]
Material
Black thermoplastic, flame retardant
A
.050
.003
.003
[1.27]
Typ.
B
C
[
.100
[2.54]
Typ.
[
0.08]
0.08]
Related Product Data
.600
[15.24]
.100
[2.54]
Typ.
R
X
Contacts — pages 211-213
.070
Typ.
Optional
[1.78]
Mateable Headers and Posts—
pages 117-131
.240
[6.10]
.100
[2.54]
Technical Documents
pages 277, 278
—
Section X-X
Part Nos.
X
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Dimensions
B
No. of
Pos.
A
C
Stamped*
Unstamped**
6
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.800 [71.12]
2.900 [73.66]
3.000 [76.20]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
3.600 [91.44]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.100 [2.54]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.700 [43.18]
87977-1
2-87977-8
2-87977-9
3-87977-0
3-87977-1
3-87977-2
3-87977-3
3-87977-4
3-87977-5
3-87977-6
3-87977-7
3-87977-8
3-87977-9
4-87977-0
4-87977-1
4-87977-2
4-87977-3
4-87977-4
4-87977-5
4-87977-6
4-87977-7
5-87977-6
4-87977-8
4-87977-9
5-87977-0
5-87977-8
6-87977-0
5-87977-1
6-87977-2
5-87977-2
5-87977-3
5-87977-4
Application Specification
114-25003, 114-25016
8
87977-2
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
50
52
54
56
58
60
64
66
70
72
87977-3
87977-4
.300 [7.62]
87977-5
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.200 [30.48]
1.300 [33.02]
1.300 [33.02]
1.400 [35.56]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
87977-6
—
87977-8
—
5
1-87977-0
1-87977-1
—
Keying Plugs
—
—
—
—
—
1-87977-8
—
—
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
—
2-87977-1
—
Material — Natural color nylon
—
—
—
2-87977-4
—
—
—
—
**Cavity identification, part number and date code stamped on housing where size permits.
**No marking on housing or strain relief.
Notes: 1. Strain reliefs are available and may be purchased separately. Consult TE.
Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3.
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
217
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Strain Relief Locators
(on Housings 20 Positions
and Larger)
Polarized (with Detent
Latching, with and without
Strain Relief/Pull Tab)
.175
[4.45]
A
Material
.003
.003
B
C
[ 0.08]
[ 0.08]
Black thermoplastic, flame retardant
.100
[2.54]
.050
[1.27]
Typ.
Typ.
.100
[2.54]
.600
[15.24]
Typ.
X
Related Product Data
Contacts — pages 211-213
.240
Mateable Headers and Posts —
[6.10]
.070
[1.78]
Typ.
pages 117-125, 127-133
.100
[2.54]
Section X-X
R
X
Technical Documents
pages 277, 278
—
Optional
.500
[12.70]
1.000
[25.40]
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
114-25003, 114-25016
1.900
[48.26]
.095
[2.41]
Dia.
1.150
[29.21]
.095
[2.41]
Dia.
5
Housing with
Strain Relief/Pull Tab
Strain Relief Part No. 87921-1
Housing with
Strain Relief/Pull Tab
Strain Relief Part No. 87710-1
Keying Plugs
(10 thru 18 positions)
(20 positions and larger)
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Part Nos.
Dimensions
No. of
Detents
No. of
Pos.
Without Strain Relief
With Strain Relief
Stamped*
—
A
B
C
Stamped*
Unstamped**
87631-1
6
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
.400 [10.16]
.100 [2.54]
1
1
1
1
1
1
87631-2
87631-4
Material — Natural color nylon
8
.100 [2.54]
.200 [5.08]
.200 [5.08]
.300 [7.62]
.300 [7.62]
87631-3
—
10
12
14
16
87631-6
87631-5
87922-1
87922-2
87922-3
87922-4
87631-8
87631-7
1-87631-0
1-87631-2
87631-9
1-87631-1
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
218
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Part Nos.
Without Strain Relief
Dimensions
B
No. of
Detents
No. of
Pos.
With Strain Relief
A
C
Stamped*
1-87631-4
1-87631-6
1-87631-8
2-87631-0
2-87631-2
2-87631-4
2-87631-6
2-87631-8
3-87631-0
3-87631-2
—
Unstamped**
1-87631-3
1-87631-5
1-87631-7
1-87631-9
2-87631-1
2-87631-3
2-87631-5
2-87631-7
2-87631-9
3-87631-1
3-87631-3
3-87631-5
3-87631-7
3-87631-9
5-87631-9
4-87631-1
4-87631-3
4-87631-5
6-87631-3
5-87631-1
6-87631-5
5-87631-3
5-87631-5
5-87631-7
Stamped*
87922-5
87733-1
—
18
20
22
24
26
28
30
32
34
36
38
40
42
44
48
50
52
54
58
60
64
66
70
72
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
2.700 [68.58]
2.900 [73.66]
3.000 [76.20]
3.200 [81.28]
3.300 [83.82]
3.500 [88.90]
3.800 [96.52]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1.000 [25.40]
.400 [10.16]
.400 [10.16]
.500 [12.70]
.500 [12.70]
.600 [15.24]
.600 [15.24]
.700 [17.78]
.700 [17.78]
.800 [20.32]
.800 [20.32]
.900 [22.86]
.900 [22.86]
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
87733-3
87733-4
—
87733-6
87733-7
87733-8
—
—
3-87631-6
3-87631-8
4-87631-0
—
1-87733-1
—
1.000 [25.40] 1.000 [25.40]
1.100 [27.94] 1.000 [25.40]
1.200 [30.48] 1.100 [27.94]
1.200 [30.48] 1.200 [30.48]
1.300 [33.02] 1.200 [30.48]
1.300 [33.02] 1.300 [33.02]
1.400 [35.56] 1.400 [35.56]
1.500 [38.10] 1.400 [35.56]
1.600 [40.64] 1.500 [38.10]
1.600 [40.64] 1.600 [40.64]
1.700 [43.18] 1.700 [43.18]
1.800 [45.72] 1.700 [43.18]
—
—
4-87631-2
—
1-87733-4
—
4-87631-6
—
—
—
5-87631-2
6-87631-6
—
1-87733-7
—
—
—
—
5-87631-8
—
**Cavity identification, part number and date code stamped on housing and/or strain relief where size permits.
**No marking on housing or strain relief.
Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing.
Notes: 2. Strain reliefs may be purchased separately.
Notes: 3. Contact Extraction/Lance Reset Tool No. 843996-3.
5
Note: All part numbers are RoHS compliant.
219
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod IV Wire-Applied Housings, Double-Row,
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Position No. 1 Indicator
Center Polarized
.030
[0.76]
.150†
[3.81]
.570
[14.88]
.130
[3.30]
.130
[3.30]
B
A
Material
Black thermoplastic, flame retardant
Related Product Data
.120
[3.05]
C
.072
[1.83]
Contacts — pages 211-213
.600
[15.24]
Mateable Headers and Posts —
AMP-LATCH Low Profile Headers,
Shrouded — pages 135-140
X
X
.285
[7.24]
.227
[5.77]
.100
[2.54]
R Optional
Technical Documents
pages 277, 278
—
Section X-X
Product Specification
108-25007, 108-25019, 108-25020,
108-25021
Application Specification
Dimensions
Part Nos.
(Stamped*)
No. of
114-25003, 114-25016
Pos.
8
A
B
C
.580 [14.73]
.680 [17.27]
.880 [22.35]
.980 [24.89]
1.180 [29.97]
1.280 [32.51]
1.380 [35.05]
1.480 [37.59]
1.680 [42.67]
1.880 [47.75]
2.180 [55.37]
2.380 [60.45]
2.680 [68.07]
3.180 [80.77]
3.380 [85.85]
.225 [5.72]
.275 [6.98]
.375 [9.53]
.300 [7.62]
.400 [10.16]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.400 [35.56]
1.600 [40.64]
1.900 [48.26]
2.100 [53.34]
2.400 [60.96]
2.900 [73.66]
3.100 [78.74]
1-102387-4
102387-1
102387-2
102387-3
102387-4
1-102387-5
102387-5
102387-6
102387-7
102387-8
102387-9
1-102387-3
1-102387-0
1-102387-1
1-102387-2
10
14
16
20
22
24
26
30
34
40
44
50
60
64
.425 [10.80]
.525 [13.34]
.575 [14.61]
.625 [15.88]
.675 [17.15]
.775 [19.69]
.875 [22.23]
1.025 [26.04]
1.125 [28.58]
1.275 [32.39]
1.525 [38.74]
1.625 [41.28]
5
Keying Plugs
*Cavity identification and TE stamped on housing.
†Non-functional slot is used for gating purposes during injection molding process. This gating feature is not inherent in
all production molds. Therefore, the depicted slot will only be present on housings produced on mold tooling requiring
this gating feature.
Part No. 86286-1
(Plugs into standard or intermediate
pressure receptacle contact)
Note: Contact Extraction/Lance Reset Tool No. 843996-3.
Material — Natural color nylon
Part No. 87077-2
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
220
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Short Point, Crimp Snap-In Wire-Applied Contacts and Housings
Product Facts
I Short point of contact
mates with .169 [4.29]
to .259 [6.58] long post
I Double-row housings are
end-to-end and side-to-side
stackable
I Terminates 32-20 AWG
[0.03-0.6 mm2] discrete
wire
I Contacts have insulation
support to accept a
maximum insulation
diameter of .060 [1.52]
I Available with .000015
[0.00038] or .000030
[0.00076] gold duplex,
or tin plating
I Mates with .025 [0.64]
square posts
I Dual cantilever contact
beams for reliable matings
I Locking retention latch
provides approximately
3 lb [13.34 N] of retention
force
104257-3 MTE Recept. Housing
1-104480-4 Short Point Contact
Wire-to-Board
5-104450-3 MTE Hdr
1-87232-0 Hdr
I Unique locking latch design
helps prevent latch from
protruding through latch
window
I Contacts snap into
AMPMODU MTE single-row
housings
104482-9 Short Point Recept. Housing
5-104481-6 Short Point Contact
5
I Double-row housing
configurations include
.100 [2.54] centerline,
plain and polarized
104257-5 MTE Recept. Housing
1-104480-5 Short Point Contact
103688-9 MTE Recept. Housing
1-104479-1 Short Point Contact
I Housing sizes range from
4 to 52 positions
I Recognized under the
AMPMODU Short Point
receptacle contacts are
designed to mate with .025
[0.64] square posts. They
will mate with posts as short
as .169 [4.29].
Performance
Component Program
Characteristics
of Underwriters
R
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.)
Durability — Ref. Product
Specification 108-1472
Laboratories Inc.,
File No. E28476
I Certified by
Canadian Standards
Association,
R
Short Point double-row
housings are end-to-end
and side-to-side stackable
on .100 [2.54] centers.
Contacts also can be used
in single-row AMPMODU
MTE housings to provide
a complete wire-crimp
system, or to serve as
replacement contacts.
File No. LR7189
I Produced under a Quality
Management System
certified to ISO
9001
A copy of the
certificate is available
upon request
Note: All part numbers are RoHS compliant.
221
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Short Point Crimp Snap-In Receptacle Contacts
Material and Finish
.068
[1.73]
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
.060
[1.52]
.460
[11.68]
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
C
C
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
page 270-272
.012
[0.30]
Gap
Technical Documents
pages 276-278
—
Product Specification
108-1472
Application Specification
114-25038
Section C - C
5
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
Extraction/Lance Reset
Tool No. 843477-1
Quick-Change
Applicator for
AMP-O-LECTRIC
Machine*
Applicator for
AMP-O-MATIC
Stripper/Crimper
Machine
Wire Size
Range
Ins.
Dia.
Range
Contact Part No.
Hand
Tool
Nos.
(Standard Pressure)
Finish
AWG
[mm2]
Strip Form Loose Piece
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
1-104481-1
1-104481-0
5-104481-2
1-104480-3
1-104480-2
1-104480-7
1-104479-0
104479-9
1-104481-3
1-104481-2
5-104481-6
1-104480-6
1-104480-5
1-104480-4
1-104479-3
1-104479-2
1-104479-1
32-28 0.03-0.08 .025-.060 [0.64-1.52]
567296-2
567297-2
567298-2
466980-1
466981-1
466982-1
91518-1
91518-1
91551-1
.
26-22
24-20
0.13-0.3
0.2-0.5
.025-.060 [0.64-1.52]
.
.025-.060 [0.64-1.52]
104479-8
*For use with Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-722-1111) for part nos. of applicators for use with the Model “G”
machines (shown on page 288), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: All part numbers are RoHS compliant.
222
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Short Point Wire-Applied Housings, Double-Row, Non-Polarized,
.100 x .100 [2.54 x 2.54] Centerline
A
Material
Black thermoplastic, flame retardant,
94V-0 rated
.600
[15.24]
B
.036
[0.91]
.049
[1.24]
Related Product Data
.049
[1.24]
2 Plc.
X
X
Performance Characteristics —
page 221
Contacts — page 222
Mateable Headers —
pages 104, 105
.198
[5.03]
0.72
[1.83]
.100
[2.54]
Typ.
.100
[2.54]
Section X-X
Technical Documents
pages 276-278
—
Product Specification
108-1472
Application Specification
114-25038
Dimensions
No. of
Pos.
Housing
Part No.
A
B
4
.198 [5.03]
.298 [7.57]
.100 [2.54]
.200 [5.08]
104482-1
104482-2
6
8
.398 [10.11]
.498 [12.65]
.598 [15.19]
.698 [17.73]
.798 [20.27]
.898 [22.81]
.998 [25.35]
1.098 [27.89]
1.298 [32.97]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.21]
1.998 [50.75]
2.198 [55.83]
2.598 [65.99]
.300 [7.62]
104482-3
10
12
14
16
18
20
22
26
28
30
32
34
36
38
40
44
52
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.100 [53.34]
2.500 [63.50]
104482-4
104482-5
104482-6
5
104482-7
104482-8
104482-9
1-104482-0
1-104482-1
1-104482-2
1-104482-3
1-104482-4
1-104482-5
1-104482-6
1-104482-7
1-104482-8
1-104482-9
2-104482-0
Note: All part numbers are RoHS compliant.
223
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Short Point Wire-Applied Housings, Double-Row, Polarized, .100 x .100
[2.54 x 2.54] Centerline
A
Material
.600
Black thermoplastic, flame retardant,
94V-0 rated
[15.24]
.100
[2.54]
.100
[2.54]
.095
[2.41]
.049
[1.24]
.049
[1.24]
2 Plc.
X
.036
[0.91]
Related Product Data
.198
[5.03]
Performance Characteristics —
page 221
0.72
[1.83]
Contacts — page 222
Mateable Headers —
pages 104, 105, 135-138
.100
[2.54]
X
.100
[2.54]
Typ.
Section X-X
B
Technical Documents
pages 276-278
—
Product Specification
108-1472
Application Specification
114-25038
Dimensions
No.of
Pos.
Housing
Part No.
A
B
8
.398 [10.11]
.498 [12.65]
.598 [15.19]
.698 [17.73]
.898 [22.81]
.998 [25.35]
1.298 [32.97]
1.498 [38.05]
1.898 [48.21]
2.498 [63.45]
2.598 [65.99]
2.698 [68.53]
3.198 [81.23]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.800 [20.32]
.900 [22.86]
1.200 [30.48]
1.400 [35.56]
1.800 [45.72]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
3.100 [78.74]
104483-1
1-104483-1
1-104483-2
104483-9
104483-2
104483-3
104483-4
104483-5
104483-6
1-104483-3
1-104483-0
104483-7
104483-8
10
12
14
18
20
26
30
38
50
52
54
64
5
Note: Other sizes can be made available on request.
Note: All part numbers are RoHS compliant.
224
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Interconnection System
Product Facts
I
Receptacle assemblies mate
with .025 [0.64] sq. posts;
mating post length is .200
[5.08] min., .250 [6.35] max.
I
Proven AMPMODU receptacle
contact design; dual
cantilever beams, built-in
anti-overstress, completely
enclosed “box” design,
standard or high-pressure
I
I
Insulation displacement
technology
Two contact sizes for
terminating 30-22 AWG [0.05-
0.3 mm2] wire range; .054
[1.37] max. insulation diam-
eter with an insulation wall
thickness of .015 [0.38] max.
I
I
Choice of gold duplex or tin
plated contacts
Interchangeable crimp
snap-in pin and receptacle
contacts available
I
I
I
Housing sizes 2 through
25 positions, single-row .100
[2.54] centers
Plain housings are end-to-end
and/or back-to-back stackable
for open pin field applications
The AMPMODU MTE
Interconnection System
offers both wire-to-board
and wire-to-wire connectors
using .025 [0.64] sq. post
technology.
standard or high-pressure,
features dual cantilever
beams in an enclosed
Performance
Specifications
Optional header with
“swaged tail” feature helps
prevent movement prior to
flow soldering
Electrical Characteristics
Contact Current Rating —
3 amperes for single contact in free air
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Contact Termination
Resistance — 15 milliohms (max.)
Dielectric Withstanding Voltage —
At Sea Level–600 VAC, rms
At 70,000 Ft. [21 336 m]–225 VAC, rms
“box.” The post stop helps
prevent a mating post from
disturbing the wire
termination and also limits
the mating depth of a long
post to protect a wrap-type
termination at the base of
the post. The forward
contact stop helps prevent
contact overinsertion prior
to termination. All contacts
are furnished on carrier
strips which are interlocked
for stability and positive
location during termination.
5
I
I
Integral latch provides
positive retention between
header and receptacle
housing
The AMPMODU MTE
Interconnection System
consists of single-row
housings with contacts
preloaded on .100 [2.54]
centers. Housings are
furnished with contacts
partially inserted, leaving
the termination areas
exposed. Final contact
insertion can be
accomplished automatically
with TE application
equipment, and manually
when terminated with the TE 25 positions. Included are
pistol grip hand tool.
Coupling shrouds permit
ganging of smaller connectors
with guide ribs to form larger
single- or double-row
Insulation Resistance —
5,000 megohms (min.)
latching connectors
I
Mass terminating tooling
provides lowest applied cost
for most production needs
Environmental Characteristics
Operating Temperature —
-65°C to +105°C
Vibration — 15 G’s (gold), 10 G’s (tin)
Physical Shock — 50 G’s
Industrial Mixed Flow Gasing —
Class 1 (20 days) (gold)
Single-row housings are
available in sizes 2 through
I
I
SMT and SMT compatible,
high-temp headers available
Recognized under the
Component Program of
Underwriters
three styles of receptacle
housings—plain, polarized/
latching and ribbed and two
styles of pin housings,
shrouded with polarizing/
latching feature and ribbed.
The heart of the system is
the insulation displacement
contact design, featured in
both pin and receptacle
contacts. The receptacle
contact, available in either
Product Specification
108-25034
Application Specification
114-25026
Laboratories Inc.,
File No. E28476
R
I
Certified by Canadian
Standards
R
Association,
File No. LR7189
225
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
MTE Interconnection System (Continued)
Wire-to-Board
High-Temp Headers,
Polarized/Latching, Straight
and Right Angle Post,
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Assemblies
Polarized/Latching
(See pages 230 & 231)
with or without Holddown
(See pages 249 & 250)2
Double-Row Coupling
Shroud (See page 241)
Receptacle
Assemblies,
Polarized/Latching (See
pages 230 & 231)
AMPMODU Shrouded
Headers,
Polarized/Latching,
Headers, Double-Row,
Straight or Right Angle
Post1 (See pages
119-121, 124, 125, 127,
128, 131-133 & 149)
Straight Post, with or
without Swaged Tail
(See pages 244 & 245)2
Headers,
Polarized/Latching,
Right Angle Post, with
or without Holddown
(See pages 246 & 247)
Receptacle Assemblies Plain
(See pages 228 and 229)
High Pressure Receptacle Assemblies,
Plain (See page 234)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
AMPMODU Breakaway Headers,
Single- or Double-Row, Straight
or Right–Angle Post, with or
without Board Retention Feature
(See pages 102-105)
Receptacle Contact,
Insulation Displacement
(Used in all
Single-Row Coupling
Shroud (See page 240)
Receptacle Assemblies)
5
1Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last
1post to inside of end shroud wall.
2Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252)
226
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Interconnection System (Continued)
Wire-to-Wire
Pin Assemblies, Shrouded
Polarized/Latching
(See pages 236 & 237)
Receptacle Assemblies,
Polarized/Latching
(See pages 230 & 231)
Receptacle Contact,
Insulation Displacement
(Used in all
Pin Contact,
Insulation
Displacement
(Used in all Pin
Assemblies)
Receptacle Assemblies)
Pin Assemblies
with Guide Ribs (See
pages 238 & 239)
Panel Mount
Pin Shroud
(See page 242)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Single-Row
Coupling
Shroud (See
page 240)
Crimp Snap-In
Receptacle Contact
(Used with Unloaded
Housings—
Crimp Snap-In Pin
Contact (Used with
Unloaded Housings—
See page 254)
See page 253)
Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable.
5
227
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
.600
[15.24]
TE Manual Pistol Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
B
Typ.
A
Position No. 1 Indicator
(Farside)
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.100
[2.54]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.098
[2.49]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110 (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Single-Row Shrouded Headers
with .066 [1.68] End Dimension —
pages 115, 116
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
—
These receptacle assemblies
with plain housings can be
stacked end-to-end and/or side-
to-side for single or double-row
connections to an open pin field
with a .100 [2.54] centerline grid.
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
228
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form Plain,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Dimensions
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
2.000 [50.80]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
8
5
4
4
2
2
2
2
2
2
5-103979-1
5-103979-2
5-103979-3
5-103979-4
5-103979-5
5-103979-6
5-103979-7
5-103979-8
5-103979-9
6-103979-0
6-103979-1
5-103978-1
5-103978-2
5-103978-3
5-103978-4
5-103978-5
5-103978-6
5-103978-7
5-103978-8
5-103978-9
6-103978-0
6-103978-1
5-103977-1
5-103977-2
5-103977-3
5-103977-4
5-103977-5
5-103977-6
5-103977-7
5-103977-8
5-103977-9
6-103977-0
6-103977-1
5-103976-1
5-103976-2
5-103976-3
5-103976-4
5-103976-5
5-103976-6
5-103976-7
5-103976-8
5-103976-9
6-103976-0
6-103976-1
5-103975-1
5-103975-2
5-103975-3
5-103975-4
5-103975-5
5-103975-6
5-103975-7
5-103975-8
5-103975-9
6-103975-0
6-103975-1
5-103974-1
5-103974-2
5-103974-3
5-103974-4
5-103974-5
5-103974-6
5-103974-7
5-103974-8
5-103974-9
6-103974-0
6-103974-1
103688-1
103688-2
103688-3
103688-4
103688-5
103688-6
103688-7
103688-8
103688-9
1-103688-0
1-103688-1
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
10 2.000 [50.80] .998 [23.35]
11 2.200 [55.88] 1.098 [27.89]
12 2.400 [60.96] 1.198 [30.43]
MTE Receptacle Assemblies—Individual Form Plain,
Single-Row, .100 [2.54] Centerline
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Dimensions
B
Unloaded
Housings
Plating A
6-103903-2
6-103903-3
6-103903-4
6-103903-5
6-103903-6
6-103903-7
6-103903-8
6-103903-9
7-103903-0
7-103903-1
7-103903-2
7-103903-3
7-103903-4
Plating B
6-103684-2
6-103684-3
6-103684-4
6-103684-5
6-103684-6
6-103684-7
6-103684-8
6-103684-9
7-103684-0
7-103684-1
7-103684-2
7-103684-3
7-103684-4
Plating C
6-103685-2
6-103685-3
6-103685-4
6-103685-5
6-103685-6
6-103685-7
6-103685-8
6-103685-9
7-103685-0
7-103685-1
7-103685-2
7-103685-3
7-103685-4
Plating A
Plating B
6-103686-2
6-103686-3
6-103686-4
6-103686-5
6-103686-6
6-103686-7
6-103686-8
6-103686-9
7-103686-0
7-103686-1
7-103686-2
7-103686-3
7-103686-4
Plating C
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
6-103902-2
6-103902-3
6-103902-4
6-103902-5
6-103902-6
6-103902-7
6-103902-8
6-103902-9
7-103902-0
7-103902-1
7-103902-2
7-103902-3
7-103902-4
6-103687-2
6-103687-3
6-103687-4
6-103687-5
6-103687-6
6-103687-7
6-103687-8
6-103687-9
7-103687-0
7-103687-1
7-103687-2
7-103687-3
7-103687-4
1-103688-2
1-103688-3
1-103688-4
1-103688-5
1-103688-6
1-103688-7
1-103688-8
1-103688-9
2-103688-0
2-103688-1
2-103688-2
2-103688-3
2-103688-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
229
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Receptacle Assemblies—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions 2 thru
12. For ease of handling, positions
2 thru 5 are recommended when
using the TE Manual Pistol Grip
Tool.
1.120
[28.45]
.600
[15.24]
Material and Finish
Housing — Black thermoplastic,
B
Typ.
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
A
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Position No. 1 Indicator
(Farside)
.100
[2.54]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.098
[2.49]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
Related Product Data
Mateable AMPMODU Products
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide
Ribs (installed in Panel Mount
Pin Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
230
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Dimensions
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
2.000 [50.80]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
8
5
4
4
2
2
2
2
2
2
5-103961-1
5-103961-2
5-103961-3
5-103961-4
5-103961-5
5-103961-6
5-103961-7
5-103961-8
5-103961-9
6-103961-0
6-103961-1
5-103960-1
5-103960-2
5-103960-3
5-103960-4
5-103960-5
5-103960-6
5-103960-7
5-103960-8
5-103960-9
6-103960-0
6-103960-1
5-103959-1
5-103959-2
5-103959-3
5-103959-4
5-103959-5
5-103959-6
5-103959-7
5-103959-8
5-103959-9
6-103959-0
6-103959-1
5-103958-1
5-103958-2
5-103958-3
5-103958-4
5-103958-5
5-103958-6
5-103958-7
5-103958-8
5-103958-9
6-103958-0
6-103958-1
5-103957-1
5-103957-2
5-103957-3
5-103957-4
5-103957-5
5-103957-6
5-103957-7
5-103957-8
5-103957-9
6-103957-0
6-103957-1
5-103956-1
5-103956-2
5-103956-3
5-103956-4
5-103956-5
5-103956-6
5-103956-7
5-103956-8
5-103956-9
6-103956-0
6-103956-1
104257-1
104257-2
104257-3
104257-4
104257-5
104257-6
104257-7
104257-8
104257-9
1-104257-0
1-104257-1
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
10 2.000 [50.80] .998 [23.35]
11 2.200 [55.88] 1.098 [27.89]
12 2.400 [60.96] 1.198 [30.43]
MTE Receptacle Assemblies—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Dimensions
B
Unloaded
Housings
Plating A
6-103897-2
6-103897-3
6-103897-4
6-103897-5
6-103897-6
6-103897-7
6-103897-8
6-103897-9
7-103897-0
7-103897-1
7-103897-2
7-103897-3
7-103897-4
Plating B
6-103640-2
6-103640-3
6-103640-4
6-103640-5
6-103640-6
6-103640-7
6-103640-8
6-103640-9
7-103640-0
7-103640-1
7-103640-2
7-103640-3
7-103640-4
Plating C
6-103641-2
6-103641-3
6-103641-4
6-103641-5
6-103641-6
6-103641-7
6-103641-8
6-103641-9
7-103641-0
7-103641-1
7-103641-2
7-103641-3
7-103641-4
Plating A
6-103734-2
6-103734-3
6-103734-4
6-103734-5
6-103734-6
6-103734-7
6-103734-8
6-103734-9
7-103734-0
7-103734-1
7-103734-2
7-103734-3
7-103734-4
Plating B
6-103644-2
6-103644-3
6-103644-4
6-103644-5
6-103644-6
6-103644-7
6-103644-8
6-103644-9
7-103644-0
7-103644-1
7-103644-2
7-103644-3
7-103644-4
Plating C
6-103645-2
6-103645-3
6-103645-4
6-103645-5
6-103645-6
6-103645-7
6-103645-8
6-103645-9
7-103645-0
7-103645-1
7-103645-2
7-103645-3
7-103645-4
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
1-104257-2
1-104257-3
1-104257-4
1-104257-5
1-104257-6
1-104257-7
1-104257-8
1-104257-9
2-104257-0
2-104257-1
2-104257-2
2-104257-3
2-104257-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
231
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Receptacle Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended
when using theTE Manual Pistol
GripTool.
1.120
[28.45]
.600
[15.24]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
B
Typ.
A
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Position No. 1 Indicator
(Farside)
.100
[2.54]
Typ
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
.098
[2.49]
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Interchangeable Crimp Contacts—
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
pages 277, 278
—
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Product Specification
108-25034
Application Specification
114-25026
232
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Dimensions
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
2.000 [50.80]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
8
5
4
4
2
2
2
2
2
2
5-103973-1
5-103973-2
5-103973-3
5-103973-4
5-103973-5
5-103973-6
5-103973-7
5-103973-8
5-103973-9
6-103973-0
6-103973-1
5-103972-1
5-103972-2
5-103972-3
5-103972-4
5-103972-5
5-103972-6
5-103972-7
5-103972-8
5-103972-9
6-103972-0
6-103972-1
5-103971-1
5-103971-2
5-103971-3
5-103971-4
5-103971-5
5-103971-6
5-103971-7
5-103971-8
5-103971-9
6-103971-0
6-103971-1
5-103970-1
5-103970-2
5-103970-3
5-103970-4
5-103970-5
5-103970-6
5-103970-7
5-103970-8
5-103970-9
6-103970-0
6-103970-1
5-103969-1
5-103969-2
5-103969-3
5-103969-4
5-103969-5
5-103969-6
5-103969-7
5-103969-8
5-103969-9
6-103969-0
6-103969-1
5-103968-1
5-103968-2
5-103968-3
5-103968-4
5-103968-5
5-103968-6
5-103968-7
5-103968-8
5-103968-9
6-103968-0
6-103968-1
103648-1
103648-2
103648-3
103648-4
103648-5
103648-6
103648-7
103648-8
103648-9
1-103648-0
1-103648-1
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
10 2.000 [50.80] .998 [23.35]
11 2.200 [55.88] 1.098 [27.89]
12 2.400 [60.96] 1.198 [30.43]
MTE Receptacle Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Dimensions
B
Unloaded
Housings
Plating A
6-103901-2
6-103901-3
6-103901-4
6-103901-5
6-103901-6
6-103901-7
6-103901-8
6-103901-9
7-103901-0
7-103901-1
7-103901-2
7-103901-3
7-103901-4
Plating B
6-103649-2
6-103649-3
6-103649-4
6-103649-5
6-103649-6
6-103649-7
6-103649-8
6-103649-9
7-103649-0
7-103649-1
7-103649-2
7-103649-3
7-103649-4
Plating C
6-103650-2
6-103650-3
6-103650-4
6-103650-5
6-103650-6
6-103650-7
6-103650-8
6-103650-9
7-103650-0
7-103650-1
7-103650-2
7-103650-3
7-103650-4
Plating A
6-103900-2
6-103900-3
6-103900-4
6-103900-5
6-103900-6
6-103900-7
6-103900-8
6-103900-9
7-103900-0
7-103900-1
7-103900-2
7-103900-3
7-103900-4
Plating B
6-103651-2
6-103651-3
6-103651-4
6-103651-5
6-103651-6
6-103651-7
6-103651-8
6-103651-9
7-103651-0
7-103651-1
7-103651-2
7-103651-3
7-103651-4
Plating C
6-103652-2
6-103652-3
6-103652-4
6-103652-5
6-103652-6
6-103652-7
6-103652-8
6-103652-9
7-103652-0
7-103652-1
7-103652-2
7-103652-3
7-103652-4
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
1-103648-2
1-103648-3
1-103648-4
1-103648-5
1-103648-6
1-103648-7
1-103648-8
1-103648-9
2-103648-0
2-103648-1
2-103648-2
2-103648-3
2-103648-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully
inserted into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
233
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE High Pressure Receptacle Assemblies—Plain,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
.600
[15.24]
TE Manual Pistol Grip Tool.
Material and Finish
B
Typ.
Housing — Black thermoplastic,
94V-0 rated
A
Contacts — Phosphor Bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050 [0.00127] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an
insulation wall thickness of .015 [0.38]
max. Mating post length for preloaded
housings is .200 [5.08] min., .250 [6.35]
max.
Position No. 1 Indicator
(Farside)
.100
[2.54]
Typ.
.098
[2.49]
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110, (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
5
Strip Form
Strip Form
Receptacle
Housings
Quantities Per
Strip Segment
Receptacle
Dimensions
No. of
Pos.
Assembly
30-26 AWG
Assembly
Application Tooling — page 273
Performance Specifications —
page 225
A
B
26-22 AWG
[.05-.15mm2] Wire
[.12-.30mm2] Wire
2
3
1.980 [50.29]
1.490 [37.85]
1.990 [50.55]
1.990 [50.55]
2.390 [60.71]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
5
5
4
4
2
2
2
2
2
2
5-104438-1
5-104438-2
5-104438-3
5-104438-4
5-104438-5
5-104438-6
5-104438-7
5-104438-8
5-104438-9
6-104438-0
6-104438-1
5-104439-1
5-104439-2
5-104439-3
5-104439-4
5-104439-5
5-104439-6
5-104439-7
5-104439-8
5-104439-9
6-104439-0
6-104439-1
Technical Documents
pages 277, 278)
—
4
.398 [10.11]
.498 [12.65]
.598 [15.19]
.698 [17.73]
.798 [20.27]
.898 [22.81]
.998 [23.35]
1.098 [27.89]
1.198 [30.43]
5
6
Product Specification
108-25034
Application Specification
114-25026
7
8
9
10
11
12
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched
into “preload” windows. Contacts are fully inserted into housings automatically when terminated with
TE application machines, or manually when terminated with TE pistol grip hand tool.
2. High pressure receptacle contacts can be made available in other housing styles and position sizes.
Contact your TE sales representative.
Note: All part numbers are RoHS compliant.
234
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE High Pressure Receptacle Assemblies – Guide Ribs
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
.600
[15.24]
TE Manual Pistol Grip Tool.
Material and Finish
B
Typ.
Housing — Thermoplastic, black,
94V-0 rated
A
Position No. 1 Indicator
(Farside)
Contacts — Phosphor Bronze,
duplex plated .000030 [0.00076] gold
on contact area, .000050 [0.00127] min.
tin on crimp area, with entire contact
underplated .000050 [0.00127] nickel.
.100
[2.54]
Typ
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
.098
[2.49]
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
5
Strip Form
Strip Form
Receptacle
Housings
Receptacle
Assembly
30-26 AWG
Dimensions
No. of
Pos.
Quantities Per
Strip Segment
Assembly
A
B
26-22 AWG
[.05-.15mm2] Wire
5-147396-1
5-147396-2
5-147396-3
5-147396-4
5-147396-5
5-147396-6
5-147396-7
5-147396-8
5-147396-9
6-147396-0
6-147396-1
[.12-.30mm2] Wire
2
3
1.980 [50.29]
1.490 [37.85]
1.990 [50.55]
1.990 [50.55]
2.390 [60.71]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
5
5
4
4
2
2
2
2
2
2
5-147030-3
5-147030-4
5-147030-1
5-147030-2
5-147030-5
5-147030-6
5-147030-7
5-147030-8
5-147030-9
6-147030-0
6-147030-1
Application Tooling — page 273
Performance Specifications —
page 225
4
.398 [10.11]
.498 [12.65]
.598 [15.19]
.698 [17.73]
.798 [20.27]
.898 [22.81]
.998 [23.35]
1.098 [27.89]
1.198 [30.43]
5
6
7
Technical Documents
pages 277, 278
—
8
9
10
11
12
Product Specification
108-25034
Application Specification
114-25026
Note: All part numbers are RoHS compliant.
235
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Pin Assemblies, Shrouded—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Pin Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
1.470
[37.34]
TE Manual Pistol Grip Tool.
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
.950
[24.13]
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
B
Typ.
Position No. 1
Indicator
A
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
.260
[6.60]
.100
[2.54]
Typ.
.200
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
[5.08]
5
Related Product Data
Mateable AMPMODU Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
236
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
MTE Pin Assemblies, Shrouded—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Pin Assembly
Strip Form Pin Assembly
Dimensions
30-26 AWG [0.05-0.15mm2] Wire
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
2.360 [59.94]
.295 [7.49]
8
5
4
4
2
3
2
2
2
2
2
5-103949-1
5-103949-2
5-103949-3
5-103949-4
5-103949-5
5-103949-6
5-103949-7
5-103949-8
5-103949-9
6-103949-0
6-103949-1
5-103948-1
5-103948-2
5-103948-3
5-103948-4
5-103948-5
5-103948-6
5-103948-7
5-103948-8
5-103948-9
6-103948-0
6-103948-1
5-103947-1
5-103947-2
5-103947-3
5-103947-4
5-103947-5
5-103947-6
5-103947-7
5-103947-8
5-103947-9
6-103947-0
6-103947-1
5-103946-1
5-103946-2
5-103946-3
5-103946-4
5-103946-5
5-103946-6
5-103946-7
5-103946-8
5-103946-9
6-103946-0
6-103946-1
5-103945-1
5-103945-2
5-103945-3
5-103945-4
5-103945-5
5-103945-6
5-103945-7
5-103945-8
5-103945-9
6-103945-0
6-103945-1
5-103944-1
5-103944-2
5-103944-3
5-103944-4
5-103944-5
5-103944-6
5-103944-7
5-103944-8
5-103944-9
6-103944-0
6-103944-1
103653-1
103653-2
103653-3
103653-4
103653-5
103653-6
103653-7
103653-8
103653-9
1-103653-0
1-103653-1
1.980 [50.29] .395 [10.03]
1.980 [50.29] .495 [12.57]
2.380 [60.45] .595 [15.11]
1.390 [35.31] .695 [17.65]
2.390 [60.71] .795 [20.19]
1.790 [45.47] .895 [22.73]
1.990 [50.57] .995 [25.27]
10 2.190 [55.63] 1.095 [27.81]
11 2.390 [60.71] 1.195 [30.35]
12 2.590 [65.79] 1.295 [32.89]
MTE Pin Assemblies, Shrouded—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Individual Pin Assembly
Individual Pin Assembly
No. of
Pos.
Dimensions
B
Unloaded
Housings
30-26 AWG [0.05-0.15mm2] Wire
26-22 AWG [0.12-0.3mm2] Wire
Plating A
6-103894-2
6-103894-3
6-103894-4
6-103894-5
6-103894-6
6-103894-7
6-103894-8
6-103894-9
7-103894-0
7-103894-1
7-103894-2
7-103894-3
7-103894-4
Plating B
6-103658-2
6-103658-3
6-103658-4
6-103658-5
6-103658-6
6-103658-7
6-103658-8
6-103658-9
7-103658-0
7-103658-1
7-103658-2
7-103658-3
7-103658-4
Plating C
6-103659-2
6-103659-3
6-103659-4
6-103659-5
6-103659-6
6-103659-7
6-103659-8
6-103659-9
7-103659-0
7-103659-1
7-103659-2
7-103659-3
7-103659-4
Plating A
Plating B
6-103660-2
6-103660-3
6-103660-4
6-103660-5
6-103660-6
6-103660-7
6-103660-8
6-103660-9
7-103660-0
7-103660-1
7-103660-2
7-103660-3
7-103660-4
Plating C
13
14
15
16
17
18
19
20
21
22
23
24
25
1.395 [35.43]
1.495 [37.97]
1.595 [40.51]
1.695 [43.05]
1.795 [45.59]
1.895 [48.13]
1.995 [50.67]
2.095 [53.21]
2.195 [55.75]
2.295 [58.29]
2.395 [60.83]
2.495 [63.37]
2.595 [65.91]
6-103893-2
6-103893-3
6-103893-4
6-103893-5
6-103893-6
6-103893-7
6-103893-8
6-103893-9
7-103893-0
7-103893-1
7-103893-2
7-103893-3
7-103893-4
6-103661-2
6-103661-3
6-103661-4
6-103661-5
6-103661-6
6-103661-7
6-103661-8
6-103661-9
7-103661-0
7-103661-1
7-103661-2
7-103661-3
7-103661-4
1-103653-2
1-103653-3
1-103653-4
1-103653-5
1-103653-6
1-103653-7
1-103653-8
1-103653-9
2-103653-0
2-103653-1
2-103653-2
2-103653-3
2-103653-4
5
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Note: All part numbers are RoHS compliant.
237
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Pin Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
Pin Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
1.120
[28.45]
.600
[15.24]
TE Manual Pistol Grip Tool.
Material and Finish
B
Typ.
Housing — Black thermoplastic,
Position No. 1 Indicator
(Farside)
94V-0 rated
A
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.100
[2.54]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.098
[2.49]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
5
Related Product Data
Mateable AMPMODU MTE Products
(with Pin Assembly Installed in
Panel Mount Pin Shroud) —
pages 242, 243
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
238
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Pin Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Pin Assembly
Strip Form Pin Assembly
Dimensions
30-26 AWG [0.05-0.15mm2] Wire
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
1.980 [50.29] 0.198 [5.03]
1.490 [37.85] 0.298 [7.57]
1.990 [50.55] 0.398 [10.11]
1.990 [50.55] 0.498 [12.65]
2.390 [60.71] 0.598 [15.19]
1.400 [35.56] 0.698 [17.73]
1.600 [40.64] 0.798 [20.27]
1.800 [45.72] 0.898 [22.81]
10
5
5
4
4
2
2
2
2
2
2
5-103955-1
5-103955-2
5-103955-3
5-103955-4
5-103955-5
5-103955-6
5-103955-7
5-103955-8
5-103955-9
6-103955-0
6-103955-1
5-103954-1
5-103954-2
5-103954-3
5-103954-4
5-103954-5
5-103954-6
5-103954-7
5-103954-8
5-103954-9
6-103954-0
6-103954-1
5-103953-1
5-103953-2
5-103953-3
5-103953-4
5-103953-5
5-103953-6
5-103953-7
5-103953-8
5-103953-9
6-103953-0
6-103953-1
5-103952-1
5-103952-2
5-103952-3
5-103952-4
5-103952-5
5-103952-6
5-103952-7
5-103952-8
5-103952-9
6-103952-0
6-103952-1
5-103951-1
5-103951-2
5-103951-3
5-103951-4
5-103951-5
5-103951-6
5-103951-7
5-103951-8
5-103951-9
6-103951-0
6-103951-1
5-103950-1
5-103950-2
5-103950-3
5-103950-4
5-103950-5
5-103950-6
5-103950-7
5-103950-8
5-103950-9
6-103950-0
6-103950-1
104503-1
104503-2
104503-3
104503-4
104503-5
104503-6
104503-7
104503-8
104503-9
1-104503-0
1-104503-1
10 2.000 [50.80] 0.998 [25.35]
11 2.200 [55.88] 1.098 [27.89]
12 2.400 [60.96] 1.198 [30.43]
MTE Pin Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
Individual Pin Assembly
Individual Pin Assembly
No. of
Pos.
Dimensions
B
Unloaded
Housings
30-26 AWG [0.05-0.15mm2] Wire
26-22 AWG [0.12-0.3mm2] Wire
Plating A
6-103896-2
6-103896-3
6-103896-4
6-103896-5
6-103896-6
6-103896-7
6-103896-8
6-103896-9
7-103896-0
7-103896-1
7-103896-2
7-103896-3
7-103896-4
Plating B
6-103657-2
6-103657-3
6-103657-4
6-103657-5
6-103657-6
6-103657-7
6-103657-8
6-103657-9
7-103657-0
7-103657-1
7-103657-2
7-103657-3
7-103657-4
Plating C
6-103656-2
6-103656-3
6-103656-4
6-103656-5
6-103656-6
6-103656-7
6-103656-8
6-103656-9
7-103656-0
7-103656-1
7-103656-2
7-103656-3
7-103656-4
Plating A
Plating B
6-103655-2
6-103655-3
6-103655-4
6-103655-5
6-103655-6
6-103655-7
6-103655-8
6-103655-9
7-103655-0
7-103655-1
7-103655-2
7-103655-3
7-103655-4
Plating C
6-103654-2
13
14
15
16
17
18
19
20
21
22
23
24
25
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
2.598 [65.99]
6-103895-2
6-103895-3
6-103895-4
6-103895-5
6-103895-6
6-103895-7
6-103895-8
6-103895-9
7-103895-0
7-103895-1
7-103895-2
7-103895-3
7-103895-4
1-104503-2
1-104503-3
1-104503-4
1-104503-5
1-104503-6
1-104503-7
1-104503-8
1-104503-9
2-104503-0
2-104503-1
2-104503-2
2-104503-3
2-104503-4
6-103654-3
6-103654-4
6-103654-5
6-103654-6
6-103654-7
6-103654-8
6-103654-9
7-103654-0
7-103654-1
7-103654-2
7-103654-3
7-103654-4
5
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with TE application machines, or manually when terminated with TE pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Note: All part numbers are RoHS compliant.
239
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs
.307
[7.80]
Single-Row
A
Material
Black thermoplastic, 94V-0 rated
.582
[14.78]
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
No. of
Pos.
Dimension
A
Single-Row
Coupling Shroud
No. of
Pos.
Dimension
A
Single-Row
Coupling Shroud
4
5
6
7
8
.485 [12.32]
103680-1
103680-2
103680-3
103680-4
103680-5
103680-6
103680-7
103680-8
103680-9
1-103680-0
1-103680-1
15
16
17
18
19
20
21
22
23
24
25
1.585 [40.26]
1.685 [42.80]
1.785 [45.34]
1.885 [47.88]
1.985 [50.42]
2.085 [52.96]
2.185 [55.50]
2.285 [58.04]
2.385 [60.58]
2.485 [63.12]
2.585 [65.66]
1-103680-2
1-103680-3
1-103680-4
1-103680-5
1-103680-6
1-103680-7
1-103680-8
1-103680-9
2-103680-0
2-103680-1
2-103680-2
.585 [14.86]
.685 [17.40]
.785 [19.94]
.885 [22.48]
.985 [25.02]
1.085 [27.56]
1.185 [30.10]
1.285 [32.64]
1.385 [35.18]
1.485 [37.72]
9
10
11
12
13
14
Pin Assemblies with Guide
Ribs, Installed in Panel
Mount Pin Shroud (Refer to
pages 238, 239 & 242)
Pin Assembly,
Shrouded
Polarized/Latching
(Refer to pages
236 & 237)
5
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233, 235)
Single-Row
Coupling Shroud
Headers, Polarized/Latching,
Straight and Right Angle Post,
with or without Holddown
(See pages 244-252)
Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products
Note: All part numbers are RoHS compliant.
240
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued)
Double-Row
Material
Black thermoplastic, 94V-0 rated
.735
[18.67]
Position No. 1
Identification
Technical Documents
pages 277, 278
—
A
Product Specification
108-25034
Application Specification
114-25026
No. of
Pos.
Dimension
A
Double-Row
Coupling Shroud
8
.585 [14.86]
103681-1
103681-2
103681-3
103681-4
103681-5
104500-1
104500-2
104500-3
104500-4
104500-5
104500-6
104500-7
104500-8
104500-9
1-104500-0
1-104500-1
10
12
14
16
18
20
22
24
26
28
30
32
34
40
50
.685 [17.40]
.785 [19.94]
.885 [22.48]
.985 [25.02]
1.085 [27.56]
1.185 [30.10]
1.285 [32.64]
1.385 [35.18]
1.485 [37.72]
1.585 [40.26]
1.685 [42.80]
1.785 [45.34]
1.885 [47.88]
2.185 [55.50]
2.685 [68.20]
AMPMODU Shrouded
Headers Double-Row, Straight
or Right–Angle Post1
5
Double-Row
Coupling Shroud
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233 & 235)
1Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline
1of last post to inside of end shroud wall.
Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products
Note: All part numbers are RoHS compliant.
241
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row
.310
[7.87]
Material
Black thermoplastic, 94V-0 rated
A
.250
Technical Documents
pages 277, 278
—
[6.35]
Product Specification
108-25034
Application Specification
114-25026
.990
[25.15]
Position No. 1
Identification
.320
[8.13]
.320
[8.13]
.270
[6.86]
B
5
Dimensions
Dimensions
No. of
Pos.
Panel Mount
No. of
Pos.
Panel Mount
Pin Shroud
Pin Shroud
103682-1
103682-2
103682-3
103682-4
103682-5
103682-6
103682-7
103682-8
103682-9
1-103682-0
1-103682-1
1-103682-2
A
B
A
B
2
3
4
5
6
7
8
9
.735 [18.67]
.835 [21.21]
.935 [23.75]
1.035 [26.29]
1.135 [28.83]
1.235 [31.37]
1.335 [33.91]
1.435 [36.45]
.625 [15.88]
.725 [18.42]
.825 [20.96]
.925 [23.50]
1.025 [26.04]
1.125 [28.58]
1.225 [31.12]
1.325 [33.66]
1.425 [36.20]
1.525 [38.74]
1.625 [41.28]
1.725 [43.82]
14 1.935 [49.15]
15 2.035 [51.69]
16 2.135 [54.23]
17 2.235 [56.77]
18 2.335 [59.31]
19 2.435 [61.85]
20 2.535 [64.39]
21 2.635 [66.93]
22 2.735 [69.47]
23 2.835 [72.01]
24 2.935 [74.55]
25 3.035 [77.09]
1.825 [46.36]
1.925 [48.90]
2.025 [51.44]
2.125 [53.98]
2.225 [56.52]
2.325 [59.06]
2.425 [61.60]
2.525 [64.14]
2.625 [66.68]
2.725 [69.22]
2.825 [71.76]
2.925 [74.30]
1-103682-3
1-103682-4
1-103682-5
1-103682-6
1-103682-7
1-103682-8
1-103682-9
2-103682-0
2-103682-1
2-103682-2
2-103682-3
2-103682-4
10 1.535 [38.99]
11 1.635 [41.53]
12 1.735 [44.07]
13 1.835 [46.61]
Note: All part numbers are RoHS compliant.
242
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row (Continued)
Material
Black thermoplastic, 94V-0 rated
Technical Documents
pages 277, 278
—
Pin Assembly with
Guide Ribs (Refer to
pages 238 & 239)
Product Specification
108-25034
Application Specification
114-25026
Panel Mount
Pin Shroud
Receptacle Assemblies with Guide
Ribs, Installed in
Single-Row Coupling Shroud
(Refer to pages 232, 233, 235 & 240)
Rear of Panel
Receptacle Assembly,
Polarized/Latching (Refer
to pages 230 & 231)
Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products
5
243
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline
.025 [0.64] Square
Straight Post (With or
Without Swaged Tail)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
A
B
Material and Finish
.230
[5.84]
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
.200
[5.08]
C
.100
[2.54]
Ref.
.060
[1.52]
(Contact Area)
X
.130
[3.30]
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
.275
[6.98]
.200
[5.08]
.100
[2.54]
.120
[3.05]
Typ.
.350
[8.89]
X
.060
[1.52]
Section X-X
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
C
.100*
[2.54]
Typ.
Related Product Data
.035 .003
[0.89 0.08]
Mateable AMPMODU MTE
Dia. Typ.
Dia. Typ.
Products —
5
or
.040 .003
[1.02 0.08]
(for Retention Tails)
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Recommended PC Board Hole Layout
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
* .003 [ 0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
pages 232, 233, 235, 240
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
244
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline (Continued)
Dimensions
B
.220 [5.59]
.320 [8.13]
Polarized/Latching Header With Swage
Polarized/Latching Header Without Swage
No. of
Pos.
A
C
Plating A
5-103908-1
5-103908-2
5-103908-3
5-103908-4
5-103908-5
5-103908-6
5-103908-7
5-103908-8
5-103908-9
6-103908-0
6-103908-1
6-103908-2
6-103908-3
6-103908-4
6-103908-5
6-103908-6
6-103908-7
6-103908-8
6-103908-9
7-103908-0
7-103908-1
7-103908-2
7-103908-3
7-103908-4
Plating B
5-104362-1
5-104362-2
5-104362-3
5-104362-4
5-104362-5
5-104362-6
5-104362-7
5-104362-8
5-104362-9
6-104362-0
6-104362-1
6-104909-2
6-104909-3
6-104909-4
6-104909-5
6-104909-6
6-104909-7
6-104909-8
6-104909-9
7-104909-0
7-104909-1
7-104909-2
7-104909-3
7-104909-4
Plating C
5-103669-1
5-103669-2
5-103669-3
5-103669-4
5-103669-5
5-103669-6
5-103669-7
5-103669-8
5-103669-9
6-103669-0
6-103669-1
6-103669-2
6-103669-3
6-103669-4
6-103669-5
6-103669-6
6-103669-7
6-103669-8
6-103669-9
7-103669-0
7-103669-1
7-103669-2
7-103669-3
7-103669-4
Plating A
5-103735-1
5-103735-2
5-103735-3
5-103735-4
5-103735-5
5-103735-6
5-103735-7
5-103735-8
5-103735-9
6-103735-0
6-103735-1
6-103735-2
6-103735-3
6-103735-4
6-103735-5
6-103735-6
6-103735-7
6-103735-8
6-103735-9
7-103735-0
7-103735-1
7-103735-2
7-103735-3
7-103735-4
Plating B
5-104363-1
5-104363-2
5-104363-3
5-104363-4
5-104363-5
5-104363-6
5-104363-7
5-104363-8
5-104363-9
6-104363-0
6-104363-1
6-104910-2
6-104910-3
6-104910-4
6-104910-5
6-104910-6
6-104910-7
6-104910-8
6-104910-9
7-104910-0
7-104910-1
7-104910-2
7-104910-3
7-104910-4
Plating C
5-103639-1
5-103639-2
5-103639-3
5-103639-4
5-103639-5
5-103639-6
5-103639-7
5-103639-8
5-103639-9
6-103639-0
6-103639-1
6-103639-2
6-103639-3
6-103639-4
6-103639-5
6-103639-6
6-103639-7
6-103639-8
6-103639-9
7-103639-0
7-103639-1
7-103639-2
7-103639-3
7-103639-4
2
3
4
5
6
7
8
9
.300 [7.62]
.400 [10.16]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
.500 [12.70] .420 [10.67]
.600 [15.24] .520 [13.21]
.700 [17.78] .620 [15.75]
.800 [20.32] .720 [18.29]
.900 [22.86] .820 [20.83]
1.000 [25.40] .920 [23.37]
10 1.100 [27.94] 1.020 [25.91]
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40]
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94]
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48]
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02]
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56]
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10]
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64]
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18]
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72]
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26]
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80]
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34]
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88]
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42]
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96]
Notes: 1. Selectively loaded headers are available, consult TE.
2. Use Keying Tool No. 91417-1 to remove post for keying.
5
Note: All part numbers are RoHS compliant.
245
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
With Holddown
.025 [0.64] Square
Right-Angle Post
.535
[13.59]
Position No. 1 Indicator
A
B
.100
C
.230
[5.84]
[2.54]
.200
[5.08]
Material and Finish
.060
[1.52]
.100
[2.54]
.200
[5.08]
(Contact Area)
Typ.
Ref.
X
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
.275
[6.99]
.365
[9.27]
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
.130
[3.30]
.120
[3.05]
X
.350
[8.89]
.145
[3.68]
.060
[1.52]
.134 .003
[3.40 0.08]
(2 Plc.)
Dia.
Section X-X
.340 .003
[8.64 0.08]
.100*
[2.54]
.055 .003
Typ.
Typ.
Typ.
[1.40 0.08]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
.035 .003
[0.89 0.08]
Dia. Typ.
C
Recommended PC Board Hole Layout
(PC board thickness (for Holddown Feature) is .062 .008[1.57 0.20])
* .003 [ 0.08]; tolerance not to accumulate within one connector pattern.
Without Holddown
5
.535
[13.59]
Related Product Data
Position No. 1 Indicator
A
Mateable AMPMODU MTE
Products —
B
.060
.230
[5.84]
[1.52]
C
Receptacle Assemblies
.200
[5.08]
.100
[2.54]
(Latching) — pages 230, 231
.100
[2.54]
Ref.
Typ.
X
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
(Contact Area)
.275
[6.99]
.200
[5.08]
pages 232, 233, 235, 240
.130
[3.30]
.120
[3.05]
Technical Documents
—
pages 277, 278
X
.350
[8.89]
.145
[3.68]
.060
[1.52]
Product Specification
108-25034
Application Specification
114-25026
C
Section X-X
.100*
[2.54]
Typ.
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
* .003 [ 0.08]; tolerance not to accumulate within one connector pattern.
246
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline (Continued)
Dimensions
B
.220 [5.59]
.320 [8.13]
Latching Header With Hold Down
Plating A Plating C
Latching Header Without Hold Down
Plating A Plating C
No. of
Pos.
A
C
Plating B
5-103673-1
5-103673-2
5-103673-3
5-103673-4
5-103673-5
5-103673-6
5-103673-7
5-103673-8
5-103673-9
6-103673-0
6-103673-1
6-103673-2
6-103673-3
6-103673-4
6-103673-5
6-103673-6
6-103673-7
6-103673-8
6-103673-9
7-103673-0
7-103673-1
7-103673-2
7-103673-3
7-103673-4
Plating B
5-103635-1
5-103635-2
5-103635-3
5-103635-4
5-103635-5
5-103635-6
5-103635-7
5-103635-8
5-103635-9
6-103635-0
6-103635-1
6-103635-2
6-103635-3
6-103635-4
6-103635-5
6-103635-6
6-103635-7
6-103635-8
6-103635-9
7-103635-0
7-103635-1
7-103635-2
7-103635-3
7-103635-4
2
3
4
5
6
7
8
9
.300 [7.62]
.400 [10.16]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
5-103904-1
5-103904-2
5-103904-3
5-103904-4
5-103904-5
5-103904-6
5-103904-7
5-103904-8
5-103904-9
6-103904-0
6-103904-1
6-103904-2
6-103904-3
6-103904-4
6-103904-5
6-103904-6
6-103904-7
6-103904-8
6-103904-9
7-103904-0
7-103904-1
7-103904-2
7-103904-3
7-103904-4
5-103672-1
5-103672-2
5-103672-3
5-103672-4
5-103672-5
5-103672-6
5-103672-7
5-103672-8
5-103672-9
6-103672-0
6-103672-1
6-103672-2
6-103672-3
6-103672-4
6-103672-5
6-103672-6
6-103672-7
6-103672-8
6-103672-9
7-103672-0
7-103672-1
7-103672-2
7-103672-3
7-103672-4
5-104935-5
5-104935-3
5-104935-1
5-104935-6
5-104935-7
5-104935-8
5-104935-2
5-104935-9
6-104935-0
6-104935-1
5-104935-4
6-104935-2
6-104935-3
6-104935-4
6-104935-5
6-104935-6
6-104935-7
6-104935-8
6-104935-9
7-104935-0
7-104935-1
7-104935-2
7-104935-3
7-104935-4
5-103634-1
5-103634-2
5-103634-3
5-103634-4
5-103634-5
5-103634-6
5-103634-7
5-103634-8
5-103634-9
6-103634-0
6-103634-1
6-103634-2
6-103634-3
6-103634-4
6-103634-5
6-103634-6
6-103634-7
6-103634-8
6-103634-9
7-103634-0
7-103634-1
7-103634-2
7-103634-3
7-103634-4
.500 [12.70] .420 [10.67]
.600 [15.24] .520 [13.21]
.700 [17.78] .620 [15.75]
.800 [20.32] .720 [18.29]
.900 [22.86] .820 [20.83]
1.000 [25.40] .920 [23.37]
10 1.100 [27.94] 1.020 [25.91]
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40]
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94]
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48]
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02]
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56]
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10]
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64]
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18]
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72]
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26]
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80]
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34]
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88]
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42]
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96]
Notes: 1. Selectively loaded headers are available, consult TE.
2. Use Keying Tool No. 91417-1 to remove post for keying.
5
Note: All part numbers are RoHS compliant.
247
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
A
B
C
.060
[1.52]
(2 Plc.)
Material and Finish
.070
[1.78]
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated .000100
[0.00254] tin over .000050 [0.00127]
nickel on entire post
.120
[3.05]
X
X
.100
[2.54]
.050
[1.27]
Dia.
.260
[6.60]
.200
[5.08]
Related Product Data
.060
[1.52]
.050
[1.27]
.100
[2.54]
Typ.
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
.230
[5.84]
.130
[3.30]
.065 .003
[1.65 0.08]
Dia.
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
C
.100*
[2.54]
Typ.
.135 .003
[3.43 0.08]
pages 232, 233, 235, 240
.075 .003
[1.91 0.08]
.350
[8.89]
Technical Documents
—
.040 .003
[1.02 0.08]
(for Retention Tails)
Dia. Typ.
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Section X-X
Recommended PC Board Hole Layout
* .003 [ 0.08]; tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
5
Dimensions
B
No. of
Pos.
Latching
Header
A
C
2
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
5-104450-1
5-104450-2
5-104450-3
5-104450-4
5-104450-5
5-104450-6
5-104450-7
5-104450-8
5-104450-9
4
5
6
7
8
9
10
Note: All part numbers are RoHS compliant.
248
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Headers, Through-hole, Surface Mount Compatible,
Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
A
B
.230
[5.84]
C
Material and Finish
.100
.200
[5.08]
(Contact Area)
[2.54]
.060
[1.52]
Ref.
Housing — Black thermoplastic,
94V-0 rated
X
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
.262
[6.65]
.120
[3.05]
.200
[5.08]
.100
[2.54]
Typ.
.350
[8.89]
.060
[1.52]
.130
[3.30]
X
Related Product Data
Section X-X
Mateable AMPMODU MTE
Products —
.040 .002
.100*
[2.54]
Typ.
Typ.
[1.02 0.05]
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
.065 .003
[1.65 0.08]
.180 .002
[4.57 0.05]
.135 .003
[3.43 0.08]
pages 232, 233, 235, 240
Receptacle Assemblies (Polarized
Latching) — pages 230, 231
.040 .003
.020 .002
[0.51 0.05]
Typ.
Dia. Typ.
[1.02 0.08]
Plated-Thru Hole
Header Profile (Shown for
orientation purposes only)
.075 .003
[1.90 0.08]
Technical Documents
—
5
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Recommended PC Board Hole Layout
(Stencil Thickness = .010 [0.25])
* .003 [ 0.08] tolerance not to accumulate within one connector pattern
Dimensions
No. of
Pos.
Polarized/Latching
Header, High-Temp
A
B
C
2
3
.300 [7.62]
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.45]
1.220 [30.99]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
5-104809-1
5-104809-2
5-104809-3
5-104809-4
5-104809-5
5-104809-6
5-104809-7
5-104809-8
5-104809-9
6-104809-0
6-104809-1
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
4
5
6
7
8
9
10
11
12
Note: All part numbers are RoHS compliant.
249
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Headers, Polarized/Latching, Through-Hole,
Surface Mount Compatible, Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Right-Angle Post (With
Holddown)
.535
[13.59]
Position No. 1 Indicator
.230
[5.84]
A
B
C
.060
[1.52]
(2 Plc.)
.100
[2.54]
.200
[5.08]
Ref.
.100
[2.54]
Material and Finish
Typ.
.120
[3.05]
X
(Contact Area)
Housing — Black thermoplastic,
94V-0 rated
.262
[6.65]
.200
[5.08]
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
.145
[3.68]
.180
[4.57]
.060
[1.52]
X
.350
[8.89]
.145
[3.68]
Section X-X
Related Product Data
+.003
.093
Dia.
-.000
+0.08
-.000
.093
Mateable AMPMODU MTE
Products —
2.36
[
]
(2 Plc.)
.
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
.340 .003
[8.64 0.08]
.090 .002
[2.29 0.05]
.100*
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Typ.
[2.54]
.070 .002
[1.78 0.51]
Typ.
.058 .003
[1.47 0.08]
(2 Plc.)
.035 .003
[0.89 0.08]
Dia. Typ.
C
Plated-Thru Hole
Technical Documents
pages 277, 278
—
Recommended PC Board
(Stencil Thickness = .010 [0.25])
5
Product Specification
* .003 [ 0.08]; tolerance is not to accumulate within one connector pattern.
108-25034
Application Specification
114-25026
Right-Angle
Header
with Hold Down
Right-Angle
Header
with Hold Down
Dimensions
B
Dimensions
B
No. of
Pos.
No. of
Pos.
A
C
A
C
2
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
.220 [5.59]
.320 [8.13]
.100 [2.54]
.200 [5.08]
5-104361-1
5-104361-2
5-104361-3
5-104361-4
5-104361-5
5-104361-6
5-104361-7
5-104361-8
5-104361-9
6-104361-0
6-104361-1
6-104361-2
14
15
16
17
18
19
20
21
22
23
24
25
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
1.420 [36.07]
1.520 [38.61]
1.620 [41.15]
1.720 [43.69]
1.820 [46.23]
1.920 [48.77]
2.020 [51.31]
2.120 [53.85]
2.220 [56.39]
2.320 [58.93]
2.420 [61.47]
2.520 [64.01]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
6-104361-3
6-104361-4
6-104361-5
6-104361-6
6-104361-7
6-104361-8
6-104361-9
7-104361-0
7-104361-1
7-104361-2
7-104361-3
7-104361-4
4
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.44]
1.220 [30.99]
1.320 [33.53]
.300 [7.62]
5
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
6
7
8
9
10
11
12
13
Note: All part numbers are RoHS compliant.
250
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MTE Headers, Right-Angle, Polarized/Latching, Surface Mount
E
.025
[0.64]
Typ.
.136 .001
[3.45 0.02]
2 Plc
.120
[3.05]
Ø.085 .002
[2.16 0.05]
.065 Min Pad on
[1.65] Underside 2 Plc
.140
[3.56]
.535
[13.59]
.190 .001
[4.83 0.02]
2 Plc
.265
[6.73]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
.165 .003
[4.19 0.07]
+ .002
.047
-.003
Ø
+ 0.05
- 0.07
.133
[3.38]
Typ
1.19
[
]
Posts — Brass, plated as follows:
Position No. 1 Indicator
.070 .002
[1.78 0.05]
(Plated thru hole)
2 Plc
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
A
C
.038
[0.97]
Recommended PC Board Layout
.350
[8.89]
.200
[5.08]
Contact Area
B
K
Ref
.120
[3.05]
Plating C — .000100 [.00254] tin over
.000050 [.00127] nickel on entire post
.262
[6.65]
.200
[5.08]
K
.457
[11.61]
Ref
.002
[0.05]
(Tangent
of heel)
See L
C
Recommended
PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperture Layout
Using .006 [0.152] or .008 [0.203]
Stencil Thickness)
D
.076
[1.93]
Section K-K
Related Product Data
Mateable AMPMODU MTE
Products —
.288
[7.32]
Ref
.054/.039
[1.37/0.99]
Receptacle Assemblies (Polarized/
View L
Latching) — pages 230, 231
.140 .002
[3.56 0.05]
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
5
Dimensions
Right-Angle Latching SMT Headers
No. of
Pos.
A
B
C
D
E
Plating A
5-147323-1
5-147323-2
5-147323-3
5-147323-4
5-147323-5
5-147323-6
5-147323-7
5-147323-8
5-147323-9
6-147323-0
6-147323-1
6-147323-2
6-147323-3
6-147323-4
6-147323-5
6-147323-6
6-147323-7
6-147323-8
6-147323-9
7-147323-0
7-147323-1
7-147323-2
7-147323-3
7-147323-4
Plating B
5-147278-1
5-147278-2
5-147278-3
5-147278-4
5-147278-5
5-147278-6
5-147278-7
5-147278-8
5-147278-9
6-147278-0
6-147278-1
6-147278-2
6-147278-3
6-147278-4
6-147278-5
6-147278-6
6-147278-7
6-147278-8
6-147278-9
7-147278-0
7-147278-1
7-147278-2
7-147278-3
7-147278-4
Plating C
5-147324-1
5-147324-2
5-147324-3
5-147324-4
5-147324-5
5-147324-6
5-147324-7
5-147324-8
5-147324-9
6-147324-0
6-147324-1
6-147324-2
6-147324-3
6-147324-4
6-147324-5
6-147324-6
6-147324-7
6-147324-8
6-147324-9
7-147324-0
7-147324-1
7-147324-2
7-147324-3
7-147324-4
2
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
.140 [3.56]
.190 [4.83]
.240 [6.10]
.290 [7.37]
.340 [8.64]
.390 [9.91]
.440 [11.18]
.490 [12.45]
.290 [7.37]
.390 [9.91]
.490 [12.45]
.590 [14.99]
.690 [17.53]
.790 [20.07]
.890 [22.61]
.990 [25.15]
3
Technical Documents
—
pages 277, 278
4
5
Product Specification
108-25034
Application Specification
114-25026
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1.200 [30.48] 1.020 [25.91]
.540 [13.72] 1.090 [27.69]
.590 [14.99] 1.190 [30.23]
.640 [16.26] 1.290 [32.77]
.690 [17.53] 1.390 [35.31]
.740 [18.80] 1.490 [37.85]
.790 [20.07] 1.590 [40.39]
.840 [21.34] 1.690 [42.93]
.890 [22.61] 1.790 [45.47]
.940 [23.88] 1.890 [48.01]
.990 [25.15] 1.990 [50.55]
1.300 [33.02] 1.120 [28.45] 1.000 [25.40]
1.400 [35.56] 1.220 [30.99] 1.100 [27.94]
1.500 [38.10] 1.320 [33.53] 1.200 [30.48]
1.600 [40.64] 1.420 [36.07] 1.300 [33.02]
1.700 [43.18] 1.520 [38.61] 1.400 [35.56]
1.800 [45.72] 1.620 [41.15] 1.500 [38.10]
1.900 [48.26] 1.720 [43.69] 1.600 [40.64]
2.000 [50.80] 1.820 [46.23] 1.700 [43.18]
2.100 [53.34] 1.920 [48.77] 1.800 [45.72]
2.200 [55.88] 2.020 [51.31] 1.900 [48.26] 1.040 [26.42] 2.090 [53.09]
2.300 [58.42] 2.120 [53.85] 2.000 [50.80] 1.090 [27.69] 2.190 [55.63]
2.400 [60.96] 2.220 [56.39] 2.100 [53.34] 1.140 [28.96] 2.290 [58.17]
2.500 [63.50] 2.320 [58.93] 2.200 [55.88] 1.190 [30.23] 2.390 [60.71]
2.600 [66.04] 2.420 [61.47] 2.300 [58.42] 1.240 [31.50] 2.490 [63.25]
2.700 [68.58] 2.520 [64.01] 2.400 [60.96] 1.290 [32.77] 2.590 [65.79]
Note: All part numbers are RoHS
compliant.
251
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
MTE Headers, Vertical, Polarized/Latching, Surface Mount
E
.075
[1.90]
.025
[0.62]
Typ.
.535
[13.59]
.313
[7.62]
.063
[1.52]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Position No. 1 Indicator
A
B
.230
[5.84]
Posts — Brass, plated as follows:
.025
[0.64]
Typ.
K
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
.100
[2.54]
.120
K
Pick and Place Cap
[3.05]
.200
[5.08]
Section K-K
.100
[2.54]
Typ.
.055 .003
[1.40 0.08]
+ .002
– .003
+ 0.05
Plating C — .000100 [.00254] tin
over .000050 [.00127] nickel on entire
post
Ø .052
.088 .003
[2.25 0.08]
1.32
[
]
– 0.07
Plated Thru-Hole
Recommended
PC Board Layout
.070 .002
[1.78 0.05]
Ø
.113
[2.88]
.227
[5.76]
(Refer to MTE Application Spec.
114-25026 for Stencil Aperature Layout
using .006 [0.152] or .008 [0.203]
stencil thickness
C
D
0.06
[1.53]
Position No. 1
Recommended PC Board Layout
Dimensions
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
5
Vertical SMT Headers
No. of
Pos.
A
B
C
D
E
Plating A
Plating B
Plating C
2
.300[7.62]
.220[5.59]
.100[2.54]
.220[5.60]
.110[2.80]
5-1375583-1
5-1375582-1 5-1375549-1
3
4
5
6
7
8
9
.400[10.16]
.500[12.70]
.600[15.24]
.700[17.78]
.800[20.32]
.900[22.86]
1.000[25.40]
.320[8.13]
.200[5.08]
.300[7.62]
.400[10.16]
.500[12.70]
.600[15.24]
.700[17.78]
.800[20.32]
.900[22.86]
.320[8.14]
.420[10.68]
.520[13.22]
.620[15.76]
.720[18.30]
.820[20.84]
.920[23.38]
1.020[25.92]
1.120[28.46]
1.220[31.00]
1.320[33.54]
1.420[36.08]
1.520[38.62]
1.620[41.16]
1.720[43.70]
1.820[46.24]
1.920[48.78]
2.020[51.32]
2.120[53.86]
2.220[56.40]
2.320[58.94]
2.420[61.48]
2.520[64.02]
.160[4.07]
.210[5.34]
5-1375583-2
5-1375583-3
5-1375583-4
5-1375583-5
5-1375583-6
5-1375583-7
5-1375583-8
5-1375583-9
6-1375583-0
6-1375583-1
6-1375583-2
6-1375583-3
6-1375583-4
6-1375583-5
6-1375583-6
6-1375583-7
6-1375583-8
6-1375583-9
7-1375583-0
7-1375583-1
7-1375583-2
7-1375583-3
7-1375583-4
5-1375582-2 5-1375549-2
5-1375582-3 5-1375549-3
5-1375582-4 5-1375549-4
5-1375582-5 5-1375549-5
5-1375582-6 5-1375549-6
5-1375582-7 5-1375549-7
5-1375582-8 5-1375549-8
5-1375582-9 5-1375549-9
6-1375582-0 6-1375549-0
6-1375582-1 6-1375549-1
6-1375582-2 6-1375549-2
6-1375582-3 6-1375549-3
6-1375582-4 6-1375549-4
6-1375582-5 6-1375549-5
6-1375582-6 6-1375549-6
6-1375582-7 6-1375549-7
6-1375582-8 6-1375549-8
6-1375582-9 6-1375549-9
7-1375582-0 7-1375549-0
7-1375582-1 7-1375549-1
7-1375582-2 7-1375549-2
7-1375582-3 7-1375549-3
7-1375582-4 7-1375549-4
.420[10.67]
.520[13.21]
.620[15.75]
.720[18.29]
.820[20.83]
.920[23.37]
.260[6.61]
.310[7.88]
.360[9.15]
.410[10.42]
.460[11.69]
.510[12.96]
.560[14.23]
.610[15.50]
.660[16.77]
.710[18.04]
.760[19.31]
.810[20.58]
.860[21.85]
.910[23.12]
.960[24.39]
1.010[25.66]
1.060[26.93]
1.110[28.20]
1.160[29.47]
1.210[30.74]
1.260[32.01]
Technical Documents
pages 277, 278
—
10 1.100[27.94] 1.020[25.91]
Product Specification
108-25034
Application Specification
114-25026
11 1.200[30.48] 1.120[28.45] 1.000[25.40]
12 1.300[33.02] 1.220[30.99] 1.100[27.94]
13 1.400[35.56] 1.320[33.53] 1.200[30.48]
14 1.500[38.10] 1.420[36.07] 1.300[33.02]
15 1.600[40.64] 1.520[38.61] 1.400[35.56]
16 1.700[43.18] 1.620[41.15] 1.500[38.10]
17 1.800[45.72] 1.720[43.69] 1.600[40.64]
18 1.900[48.26] 1.820[46.23] 1.700[43.18]
19 2.000[50.80] 1.920[48.77] 1.800[45.72]
20 2.100[53.34] 2.020[51.31] 1.900[48.26]
21 2.200[55.88] 2.120[53.85] 2.000[50.80]
22 2.300[58.42] 2.220[56.39] 2.100[53.34]
23 2.400[60.96] 2.320[58.93] 2.200[55.88]
24 2.500[63.50] 2.420[61.47] 2.300[58.42]
25 2.600[66.04] 2.520[64.01] 2.400[60.96]
Note: All part numbers are RoHS
compliant.
252
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Interchangeable Contacts, Wire Crimp (Snap-In)
Material and Finish
Short Point Receptacles
.068
[1.73]
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
.060
[1.52]
.460
[11.68]
C
C
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
.012
[0.30]
Gap
Section C - C
Extraction/Lance Reset
Tool No. 843477-1
5
Related Product Data
Technical Documents —
pages 277, 278
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Product Specification
108-1472, 108-1472-1
Application Specification
114-25038
Application Tooling—
pages 270-272
Heavy Duty Miniature
Applicator for
Applicator for
Wire Size
Range
Ins.
Dia.
Range
Contact Part No.
Hand
Tool
Nos.
AMP-O-MATIC
Stripper/Crimper
Machine
(Standard Pressure)
Finish
AMP-O-LECTRIC
AWG
[mm2]
Strip Form Loose Piece
Machine*
Plating A 1-104481-1
Plating B 1-104481-0
Plating C 5-104481-2
Plating A 1-104480-3
Plating B 1-104480-2
Plating C 1-104480-7
Plating A 1-104479-0
1-104481-3
1-104481-2
5-104481-6
1-104480-6
1-104480-5
1-104480-4
1-104479-3
1-104479-2
1-104479-1
.025-.060
32-28
26-22
24-20
0.03-0.08
567296-2
567297-2
567298-2
466980-1
466981-1
466982-1
91518-1
91518-1
91551-1
0.64-1.52
.025-.060
0.64-1.52
0.13-0.3
0.2-0.5
.025-.060
0.64-1.52
Plating B
Plating C
104479-9
104479-8
*For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Note: All part numbers are RoHS compliant.
253
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Interchangeable Contacts, Wire Crimp (Snap-In) (Continued)
Material and Finish
Pins
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000030
[0.00076] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000030
[0.00076] min. tin on solder area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
.025
[0.64]
.025
[0.64]
Extraction/Lance Reset
Tool No. 843477-1
.810
[20.57]
Related Product Data
Performance Characteristics —
page 221
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
pages 270-272
Technical Documents
—
pages 277, 278
5
Product Specification
108-25034
Application Specification
114-25026
Contact
Part No.
Applicator for
AMP-O-MATIC
Stripper/
Heavy Duty
Miniature Applicator
for AMP-O-LECTRIC
Machine*
Wire Size
Range
AWG
Hand
Tool
Nos.
Ins. Dia.
Range
(Standard Pressure)
Finish
[mm2]
Strip
Loose
Piece
Crimper
Form
Machine
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
5-104506-6
5-104506-4
5-104506-2
5-104505-6
5-104505-4
5-104505-2
5-104506-7
5-104506-5
5-104506-3
5-104505-7
5-104505-5
5-104505-3
.025-.054
32-28
0.03-0.08
—
—
58342-2
91531-1
0.64-1.37
.036-.054
0.91-1.37
26-22
0.14-0.32
567239-2
466983-1
*For use with AMP-O-LECTRIC Model “K” machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Note: All part numbers are RoHS compliant.
254
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MT and Shielded MT Interconnection System
Product Facts
I Full line of mass
termination tooling offers
lowest installed cost for
most production needs
I Dual cantilever beams with
anti-overstress features
provide redundant contact
of mating post and limit
beam deflection, preventing
permanent deformation
I Redundant insulation
displacement slots provide
for maximum reliability
I Integral wire strain relief
on contact can prevent wire
motion from being
Typical Application of End-to-End Stacking
transmitted to wire
termination areas
Wire-to-Board
5-102398-8 D-R Assembly
102540-8 Polarizing Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
I Built-in contact post stop
can protect terminated wire
from being disturbed by
over-insertion of mating
post, prevents wire from
entering contact area and
positively limits mating
connector depth
5-102398-8 D-R Assembly
102537-8 Ejection Cover
102536-8 Back Cover
5-102398-8 D-R Assembly
102541-8 Non-Polarizing Cover
102536-8 Back Cover
102185-2 Latch
5-103168-8 Hdr
5102154-4 Header
I Insulation displacement
contacts and crimp,
snap-in contacts are
interchangeable
5-102398-8 D-R Assembly
102681-5 Latching Cover
102536-8 Back Cover
5-103166-8 Header
5-103166-8 Header
5-102398-8 D-R Assembly
102396-8 Hermaphroditic Covers
I Complete serviceability
with replacement contacts
I Cover styles include
low profile (polarized,
non-polarized, latching and
ejection) and standard
profile (hermaphroditic
and ejection)
5
The AMPMODU MT and
system, features a mating
Performance
Shielded MT Interconnection interface that is the same as
Characteristics
System offers labor and
cost savings through mass
termination technology,
while maintaining the time-
proven reliability of the
AMPMODU product family.
The MT system is comprised
of preloaded, double-row
receptacle assemblies with
snap-on covers and a variety
of shielding hardware and
accessories. The system is
supported by a full line of
mass termination tooling to
meet virtually most produc-
tion needs.
the conventional AMPMODU
crimp, snap-in contact, fea-
turing dual cantilever beams,
built-in overstress protection
and a completely enclosed
“box” design.
Contact Current Rating —
I Connector housings may
be stacked end-to-end
3 amperes for single contact in free air.
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
within one pair of covers.
All varieties of covers in
this catalog are suitable for
multiple housing stacking
applications similar to the
example illustrated in the
photograph to the right
Operating Temperature —
-65°C to +105°C
To reduce EMI/ESD (electro- Termination Resistance —
12 milliohms max.
Max. Mating Force —
High pressure - 26 oz. [7.23 N]
Standard pressure - 9 oz. [2.50 N]
Min. Unmating Force —
High pressure — 5 oz. [1.39 N]
Standard pressure — 1.5 oz. [0.417 N]
Contact Retention in Housing —
5 lb. [22.24 N] per contact min.
magnetic interference/
electrostatic discharge) at
the input-output interface,
add-on metal shields can be
used to convert standard
MT connectors to shielded
MT connectors.
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
I Certified by Canadian
The insulation displacement
contact, the heart of the MT
Standards
R
Association,
File No. LR 7189
Note: All part numbers are RoHS compliant.
255
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
MT Receptacle Assemblies, Double-Row
.100 x .100 [2.54 x 2.54] Centerline
Contact
I.D. No.
Housings Pre-loaded with
Standard Pressure Contacts
.125
[3.18]
1
1
1
1
1
1
.600
[15.24]
.270
[6.86]
1
Circuit No. 1
Identifier
A Max.
Material and Finish
.070
[1.78]
Housing — Glass-filled thermoplastic,
MT Receptacle
Assembly
Right-Angle
Header
black, 94V-0 rated
.100
[2.54]
.050
[1.27]
Contacts — Copper alloy, duplex
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tail, with entire contact underplated
.000050 [0.00127] nickel
B
.300
[7.62]
.240
[6.10]
.100
[2.54]
Typ.
Related Product Data
PC
Board
.270
[6.86]
Mateable Connectors — pages 117,
122, 126, 130, 264
Cable Insulation Wall
Thickness — .015 [0.39] max.
Part Nos. (Stamped)
Wire Size Range
Dimensions
No. of
Pos.
Unloaded
Housings
Cable Insulation Diameter —
.050 [1.27] max.
Mating Post Length —
.222-.273 [5.64-6.94] max.
Performance Characteristics —
page 255
Replacement Contacts — page 265
Connector Covers —
pages 258, 259
Application Tooling —
pages 273-275
A
B
30-26 AWG
26-22 AWG
22-20 AWG
[0.05-0.15 mm2]
5-102393-1
5-102393-2
5-102393-3
5-102393-4
5-102393-5
5-102393-6
5-102393-7
5-102393-8
5-102393-9
6-102393-0
6-102393-1
6-102393-2
6-102393-3
6-102393-4
6-102393-5
6-102393-8
7-102393-3
7-102393-8
8-102393-0
[0.12-0.3 mm2]
[0.3-0.6 mm2]
6
.300 [7.62]
.200 [5.08]
.300 [7.62]
5-102398-1
5-102398-2
5-102398-3
5-102398-4
5-102398-5
5-102398-6
5-102398-7
5-102398-8
5-102398-9
6-102398-0
6-102398-1
6-102398-2
6-102398-3
6-102398-4
6-102398-5
6-102398-8
7-102398-3
7-102398-8
8-102398-0
5-102448-1
5-102448-2
5-102448-3
5-102448-4
5-102448-5
5-102448-6
5-102448-7
5-102448-8
5-102448-9
6-102448-0
6-102448-1
6-102448-2
6-102448-3
6-102448-4
6-102448-5
6-102448-8
7-102448-3
7-102448-8
8-102448-0
102394-1
102394-2
8
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
10
12
14
16
18
20
22
24
26
28
30
32
34
40
50
60
64
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
102394-3
102394-4
102394-5
102394-6
102394-7
1.000 [25.40]
102394-8
5
1.100 [27.94] 1.000 [25.40]
1.200 [30.48] 1.100 [27.94]
1.300 [33.02] 1.200 [30.48]
1.400 [35.56] 1.300 [33.02]
1.500 [38.10] 1.400 [35.56]
1.600 [40.64] 1.500 [38.10]
1.700 [43.18] 1.600 [40.64]
2.000 [50.80] 1.900 [48.26]
2.500 [63.50] 2.400 [60.96]
3.000 [76.20] 2.900 [73.66]
3.200 [81.28] 3.100 [78.74]
102394-9
1-102394-0
1-102394-1
1-102394-2
1-102394-3
1-102394-4
1-102394-5
1-102394-8
2-102394-3
2-102394-8
3-102394-0
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.
Keying Plugs
Part No. 86286-1
(Plugs into receptacle contact)
Part No. 87077-2
(Plugs directly into housing)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
256
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
MT Receptacle Assemblies, Double-Row
.100 x .100 [2.54 x 2.54] Centerline (Continued)
Contact
I.D. No.
Housings Pre-loaded with
High Pressure Contacts
4
4
4
4
4
4
4
4
4
4
.125
[3.18]
.600
[15.24]
.270
[6.86]
1
Material and Finish
A Max.
Circuit No. 1
Identifier
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy, duplex
plated .000030 [0.00076] gold in mating
area, .000050 [0.00127] tin on solder
tails, with entire contact underplated
.000050 [0.00127] nickel
MT Receptacle
Assembly
Right-Angle
Header
.050
[1.27]
.240
[6.10]
B
Related Product Data
Mateable Connectors — pages 117,
.300
[7.62]
122, 126, 130, 264
Cable Insulation Wall
Thickness — .015 [0.39] max.
Cable Insulation Diameter —
.050 [1.27] max.
Mating Post Length —
.200-.273 [5.64-6.94] max.
.100
[2.54]
.100
[2.54]
PC
Board
Typ.
.270
[6.86]
Performance Characteristics —
page 255
Replacement Contacts — page 265
Connector Covers —
pages 258, 259
Application Tooling —
pages 273-275
Part Nos. (Stamped*)
Wire Size Range
Dimensions
No. of
5
Pos.
A
B
30-26 AWG
26-22 AWG
22-20 AWG
[0.05-0.15 mm2]
5-102693-1
5-102693-2
5-102693-3
5-102693-4
5-102693-5
5-102693-6
5-102693-7
5-102693-8
[0.12-0.3 mm2]
[0.3-0.6 mm2]
6
8
.300 [7.62]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
5-102694-1
5-102694-2
5-102694-3
5-102694-4
5-102694-5
5-102694-6
5-102694-7
5-102694-8
5-102695-1
5-102695-2
5-102695-3
5-102695-4
5-102695-5
5-102695-6
5-102695-7
5-102695-8
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
Technical Documents —
pages 277, 278
10
12
14
16
18
20
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
1.000 [25.40]
*Cavity identification — first cavity (one side);TE Part No. and date code stamped on housing where size permits.
Note: Contact Extraction/Lance Reset Tool No. 843477-3, see page 265.
Keying Plugs
Part No. 86286-1
(Plugs into receptacle contact)
Part No. 87077-2
(Plugs directly into housing)
Material — Natural color nylon
Note: All part numbers are RoHS compliant.
257
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Low Profile Covers for Double-Row MT Receptacle Assemblies
Material
Front Covers
Black thermoplastic, flame retardant
A - Polarizing Cover
B - Latching Cover
(Mates with AMPMODU 4-sided shrouded
headers. Refer to pages 117, 122, 126, 130.)
(Mates with AMPMODU 4-sided shrouded
headers with extraction slot. Refer to
pages 117, 122, 126, 130.)
Related Product Data
For use on Double-Row MT Receptacle
Assemblies — pages 256, 257
.750
[19.05]
.750
[19.05]
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
L
L
Instruction Sheet
408-6532
Note: See page 259 for Low Profile
Cover Part Nos.
C - Ejection Cover
D - Non-Polarizing Cover
(Mates with AMP-LATCH universal ejection
style pin headers equipped with latching
ears, Part No. 102185-2 (with push tabs)
or Part No. 102312-2 (without push tabs),
see TE Catalog 82012.
(Designed for use with shielded connectors,
pages 261 & 262; or for non-polarizing
applications.)
.750
[19.05]
Assembled*
.750
[19.05]
.480
[12.19]
.095
[2.41]
Typ.
.150
[3.81]
5
*Dimension applies to cover when
installed on connector housing.
.468
[11.89]
Back Covers
E - For Shielding and
Non-Shielding Applications
F - For Shielding Applications
(For use with Non-Polarizing Cover only.)
(For use with any low profile cover.)
L
L
Note: All part numbers are RoHS compliant.
258
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Standard Profile Covers for Double-Row MT Receptacle Assemblies
G - Hermaphroditic Cover
H - Ejection Cover
Material
(Two hermaphroditic covers can be used or
one hermaphroditic cover can be used with
an H Ejection Cover.)
(Mates with AMP-LATCH universal ejection style
pin headers equipped with latching ears, Part No.
102185-2 (with push tabs) or Part No. 102312-2
(without push tabs), see TE Catalog 82012.
Black thermoplastic, flame retardant
1.120
[28.45]
Related Product Data
Assembled*
For use on Double-Row MT Receptacle
Assemblies — pages 256, 257
.850
[21.59]
Top View
Technical Documents —
pages 277, 278
1.120
[28.45]
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
.095
[2.41]
Typ.
114-25032
Instruction Sheet
408-6532
Bottom View
.150
[3.81]
.468
[11.89]
*Dimension applies to cover when
installed on connector housing.
L
Low Profile Covers
Standard Profile Covers
Front Covers
Back Covers
No. of
Pos.
Dimension
L
E
G
H
F
A
B
C
D
Shielding and
Non-Shielding
Applications
Hermaphroditic
Ejection
Shielding
Applications
Polarizing
Latching
Ejection Non-Polarizing
6
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48] 1-102540-0
1.300 [33.02] 1-102540-1
1.400 [35.56] 1-102540-2
1.500 [38.10] 1-102540-3
1.600 [40.64]
1.700 [43.18]
2.000 [50.80]
2.500 [63.50]
3.000 [76.20]
3.200 [81.28]
102540-1
102540-2
102540-3
102540-4
102540-5
102540-6
102540-7
102540-8
102540-9
—
—
102537-1
102537-2
102541-1
102541-2
102536-1
102536-2
—
—
102396-1
102396-2
—
8
—
10
12
14
16
18
20
22
24
26
28
30
32
34
40
50
60
64
—
102537-3
102541-3
102536-3
—
102396-3
—
5
102681-1
102681-2
102681-3
102681-4
102681-5
102681-6
102681-7
102681-8
102681-9
1-102681-0
1-102681-1
1-102681-2
1-102681-5
2-102681-0
—
102537-4
102541-4
102536-4
102823-5
102823-6
102823-7
102823-1
102823-4
102823-8
102823-9
1-102823-0
1-102823-1
1-102823-2
1-102823-3
1-102823-4
102823-2
102823-3
—
102396-4
—
102537-5
102541-5
102536-5
102396-5
—
102537-6
102541-6
102536-6
102396-6
—
—
102537-7
102541-7
102536-7
102396-7
102537-8
102541-8
102536-8
102396-8
103268-6
—
102537-9
102541-9
102536-9
102396-9
1-102537-0
1-102537-1
1-102537-2
1-102537-3
1-102537-4
1-102537-5
1-102537-8
2-102537-3
2-102537-8
3-102537-0
1-102541-0
1-102541-1
1-102541-2
1-102541-3
1-102541-4
1-102541-5
1-102541-8
2-102541-3
2-102541-8
3-102541-0
1-102536-0
1-102536-1
1-102536-2
1-102536-3
1-102536-4
1-102536-5
1-102536-8
2-102536-3
2-102536-8
3-102536-0
1-102396-0
1-102396-1
1-102396-2
1-102396-3
1-102396-4
1-102396-5
1-102396-8
2-102396-3
2-102396-8
3-102396-0
103268-7
103268-8
—
103268-9
—
—
—
—
—
—
—
1-103268-0
—
1-103268-3
—
—
—
—
Note: All part numbers are RoHS compliant.
259
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Shielding Hardware and Accessories for MT Interconnection System
Product Facts
I Add-on shielding
accessories for existing
AMPMODU Standard MT
and PC board mounted
headers
I Compact design
I Tin plated copper alloy
material
I Redundant cantilever
beams provide for good
peripheral contact,
eliminating the need for
a separate RF gasket
I Polarized mating
I 360° cable braid
termination with cable
jacket support
Shielded MT Receptacles
I Cable shielding hardware
permits molded cable
terminations after assembly
I Must be used with braided
shielded cables
I Solder tabs on right-angle
header shields are
self-retaining in a PC board
5
Shielded Right-Angle Headers
The shielded AMPMODU
MT system features add-on
metal shielding kits for
double-row standard MT
receptacle assemblies and
double-row right-angle
headers.
good peripheral contact
with the mating outer shell
half. This feature also
eliminates the need for a
separate RF gasket.
Detents in the cantilever
beam provide a positive
lock when the two halves
are mated. During assembly
the inner and outer shell
halves are snapped
Shields for right-angle
headers have integral
cantilever beams which
provide good contact with
the mating shielded MT
receptacle assembly,
without the use of a
separate RF gasket.
Cable shielding hardware
consists of a ferrule and two
stamped and formed shell
halves. The inner shell half
has a series of integral
together over a terminated
standard MT connector.
cantilever beams to provide
260
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies
Two-Piece Shields—
Straight Exit
Outer Shell Half
Material and Finish
Shell Halves — Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.
A
C
Related Product Data
B
Double-Row MT Receptacle
Assemblies — pages 256, 257
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) —
.326
[8.28]
pages 258, 259
Shield Ferrules — page 263
Ferrule Purchased
separately
(See page 263)
Technical Documents —
pages 277, 278
Product Specification
Flare braid over
assembled shells for
crimping under ferrule
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Standard MT
Receptacle Assembly
Purchased separately
(Refer to pages 256 & 257)
Inner Shell Half
5
Part Nos.
Dimensions
B
No. of
Pos.
Outer
Shell
Inner
Shell
A
C
6
.410 [10.41]
.610 [15.49]
.910 [23.11]
1.410 [35.81]
2.110 [53.59]
2.610 [66.29]
.817 [20.75]
.817 [20.75]
.950 [24.13]
.950 [24.13]
1.325 [33.66]
.950 [24.13]
1.268 [32.21]
1.667 [42.34]
1.925 [48.90]
1.925 [48.90]
2.468 [62.69]
2.468 [62.69]
102988-2
103137-2
103153-2
103341-2
104272-1
103158-2
102987-6
103136-2
103152-2
103340-2
104271-1
103157-2
10
16
26
40
50
Note: Match shield size to number of connector positions.
Note: All part numbers are RoHS compliant.
261
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies (Continued)
Two-Piece Shields—
Right-Angle Exit
.125
Dia.
[3.18]
(See Note 2)
C
Material and Finish
Outer Shell Half
Shell Halves — Copper alloy, .020
[0.51] thick; pretinned .000030
[0.00076] min.
A
Related Product Data
Double-Row MT Receptacle
Assemblies — pages 256, 257
B
Non-Polarizing Covers (Part No.
Series 102541 with back cover
102536 or 102823) —
.326
[8.28]
Ferrule Purchased
separately
(See page 263)
pages 258, 259
Shield Ferrules — page 263
Flare braid over
assembled shells for
crimping under ferrule
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
Standard MT
Receptacle Assembly
Purchased separately
(Refer to pages 256 & 257)
Inner Shell Half
5
Dimensions
Part Nos.
No. of
Pos.
A
B
C
Outer Shell
102784-2
103139-2
102786-2
102788-2
103141-2
Inner Shell
102783-2
103138-2
102785-2
102787-2
103140-2
18
26
40
50
60
1.010 [25.65]
1.410 [35.81]
2.110 [53.59]
2.610 [66.29]
3.110 [78.99]
1.120 [28.45]
1.166 [29.62]
1.135 [28.83]
.983 [24.97]
1.118 [28.40]
1.413 [35.89]
1.975 [50.17]
2.633 [66.88]
3.133 [79.58]
3.606 [91.59]
Notes: 1. Match shield size to number of connector positions.
2. Hole is provided in 26 through 60-position cable shields for application of optional cable tie pull ring after
assembly.
Note: All part numbers are RoHS compliant.
262
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Shielding Hardware and Accessories for
Double-Row MT Receptacle Assemblies (Continued)
Ferrules for Shielding Kits
Material and Finish
Soft copper, tin plated
Related Product Data
Used with Shielding Kits —
pages 261, 262
Technical Documents —
pages 277, 278
Product Specification
108-25015, 108-25018, 108-25030
Application Tooling
Application Specification
114-25032
Instruction Sheet
408-6532
AMP-O-LECTRIC Model
“G” Terminating Machine
TE Hand Tool 91410-1
(Die Set required, see table below)
Straight-Exit Shields
Outer Inner
102988-2 102987-6
Right-Angle Exit Shields
Hand Tool Die Sets
No. of
Pos.
Cable Dia.
Range
Ferrule
Applicator Die*
Part Number Assembly Part No.
Outer
Inner
Insulation
1-527116-8
1-527116-6
1-527116-5
1-527116-4
1-527116-7
1-527116-6
1-527116-5
1-527116-4
1-527116-7
1-527116-6
1-527116-5
1-527116-4
1-527116-3
1-527116-1
1-527116-3
1-527116-1
1-527116-2
1-527116-1
1-527116-0
—
Braid
6
—
—
0.200-0.250 [5.08-6.35]
0.250-0.300 [6.35-7.62]
0.310-0.360 [7.87-9.14]
0.370-0.420 [9.40-10.67]
0.190-0.240 [4.83-6.10]
0.250-0.300 [6.35-7.62]
0.310-0.360 [7.87-9.14]
0.370-0.420 [9.40-10.67]
0.190-0.240 [4.83-6.10]
0.250-0.300 [6.35-7.62]
0.310-0.360 [7.87-9.14]
0.370-0.420 [9.40-10.67]
0.320-0.370 [8.13-9.40]
0.430-0.460 [10.92-11.68]
0.320-0.370 [8.13-9.40]
0.430-0.460 [10.92-11.68]
0.380-0.420 [9.65-10.67]
0.430-0.460 [10.92-11.68]
0.470-0.520 [11.94-13.21]
0.470-0.520 [11.94-13.21]
0.500-0.545 [12.70-13.84]
0.550-0.600 [13.97-15.24]
102985-4
5-102903-2
5-102903-1
5-102789-1
5-102903-3
5-102903-2
5-102903-1
5-102789-1
5-102903-3
5-102903-2
5-102903-1
5-102903-1
5-102903-4
5-102789-2
5-102903-4
5-102789-2
5-102903-6
5-102903-5
5-102789-3
5-102903-8
5-102903-7
5-102789-4
812665-2
812665-5
812665-4
812665-3
812665-6
812665-5
812665-4
812665-3
812665-6
812665-5
812665-4
812665-3
812665-9
812665-7
812665-9
812665-7
1-812665-5
1-812665-4
1-812665-3
1-812665-8
1-812665-7
1-812665-6
527116-4
527116-3
527116-3
527116-3
527116-3
527116-3
527116-3
527116-3
527116-3
527116-3
527116-3
527116-3
527116-2
527116-2
527116-2
527116-2
527116-1
527116-1
527116-1
—
5
10
103137-2 103136-2
—
—
—
—
16
18
103153-2 103152-2
—
—
102784-2 102783-2
26
40
103341-2 103340-2
104272-1 104271-1
103139-2 103138-2
102786-2 102785-2
50
60
103158-2 103157-2
102788-2 102787-2
103141-2 103140-2
—
—
—
—
—
—
*For use with Model “K” machines. Call the TE Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (also shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Ferrules are used with shielding kits shown on pages 261 & 262, and are purchased separately.
2. Individual anvils and crimpers also may be purchased separately.
3. Ferrule Part Number 1-102903-8 also requires Spacer Part Number 527116-9.
Note: All part numbers are RoHS compliant.
263
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Shielded MT Headers for use with Shielded MT Receptacle Assemblies
AMPMODU Right-Angle
Headers PC Board Mounted
.755
[19.18]
C
Material and Finish
.460
[11.68]
Housing — Black thermoplastic,
flame retardant
Posts — Copper alloy, plated .000030
[0.00076] gold over .000050 [0.00127]
nickel on entire post
Shield — Copper alloy, .020 [0.51]
thick; pretinned .000030 [0.00076] min.
Shield
Right-Angle
Header
B
.550
[13.97]
.125
[3.18]
Related Product Data
.434
[11.02]
.025
[0.64]
Mating Connectors — Double-Row
MT Receptacle Assemblies with
.030
[0.76]
Sq. Posts
Shielding Hardware — pages 256-263
.290
[7.37]
A
Technical Documents —
pages 277, 278
.135
[3.43]
Product Specification
108-25015, 108-25018, 108-25030
.318
[8.08]
Application Specification
114-25032.
Instruction Sheet
408-6532
.145 .003
[3.68 0.08]
2 Plc.
.145 .003
[3.68 0.08]
2 Plc.
A
A
.050 .003
[1.27 0.08]
.725
[18.45]
.550 .003
[13.97 0.08]
.100 .003
[2.54 0.08]
.003
.040 .003
D
.100 .003
[2.54 0.08]
.003
Dia.
[
[
0.08]
5
D
[1.02 0.08]
(All holes)
[
[
0.08]
.003
0.08]
.003
0.08]
2D
2D
Recommended PC Board Hole Layout
for 6, 8 and 10 Positions
Recommended PC Board Hole Layout
for 16 thru 50 Positions
D - Contact centerline is .100 [2.54]; .003 [0.08] tolerances
not to accumulate within one connector pattern.
Dimensions
B
No. of
Pos.
Header
Part Nos.
Shield
Part Nos.
A
C
6
8
.200 [5.08]
.300 [7.62]
.400 [10.16]
.700 [17.78]
.800 [20.32] 1.030 [26.16] 1.110 [28.19]
.900 [22.86] 1.130 [28.70] 1.210 [30.73]
1.200 [30.48] 1.430 [36.32] 1.510 [38.35]
2.400 [60.96] 2.630 [66.80] 2.710 [68.83]
.430 [10.92]
.530 [13.46]
.630 [16.00]
.510 [12.95]
.610 [15.49]
.710 [18.03]
102792-6
102792-8
102792-1
102792-7
102792-2
102792-5
102792-9
102792-4
102991-1
102991-2
102791-2
102791-3
102791-4
1-102791-0
102791-1
102791-8
10
16
18
20
26
50
.930 [23.62] 1.010 [25.65]
Note: All part numbers are RoHS compliant.
264
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Replacement MT Receptacle Contacts
Insulation Displacement
Contacts
Contact
Identification
Material and Finish
Copper alloy, duplex plated .000030
[0.00076] gold in mating area, .000100-
.000200 [0.00254-0.00508] tin in crimp
area, with entire contact underplated
.000050 [0.00127] nickel
.050
Max.
[1.27]
Insulation
Diameter
Related Product Data
Performance Characteristics —
Standard Pressure
Receptacle
High Pressure
Receptacle
Wire Size Range
AWG
page 255
[mm2]
Contact Ident.
Part No.
Contact Ident.
Part No.
5-102641-6
5-102642-6
—
Application Tooling —
pages 273-275
30-26
26-22
22-20
0.05-0.15
0.12-0.3
0.3-0.6
1
2
3
5-102395-2
5-102399-1
5-102449-6
4
5
—
Technical Documents —
pages 277, 278
Note: Termination tooling for MT receptacle insulation displacement contacts is shown on pages 273-275.
Product Specification
108-25015, 108-25018, 108-25030
Application Specification
114-25032
Instruction Sheet
408-6532
MT receptacle contacts
incorporate the following
features.
The MT receptacle contact
cross-section is primarily
rectangular, with rounded
corners. Two integral
The configuration of the
receptacle completely
encloses the spring
members helping to prevent
damage during handling
and assembly, and makes
the system compatible with
automatic application
techniques.
cantilever beams contact
the mating square male
posts. Deflection of these
spring members is limited
by anti-overstress and
excessive permanent
deformation is prevented.
This feature allows a wide
range for tolerance of
misalignment of mating
contacts.
Cantilever
Beams
Anti-
overstress
5
Wide
Misalignment
Tolerance
Extraction/Lance Reset Tool
No. 843477-3
Note: All part numbers are RoHS compliant.
265
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Mini-Tandem Spring Receptacle Housings and Contacts
Product Facts
I Individual contacts mate
with .025 [0.64] sq. posts,
.125 [3.18] long
I Crimp snap-in contacts
accept 32-22 AWG
[0.03-0.32 mm2] wire
I Retention latch provides for
positive installation
I No insertion tool required
I High durability design
provides long life
I Available with .000015
[0.00038] or .000030
[0.00076] thick gold inlay
in contact areas, or bright
tin plated
I Closed-entry housings
I Mini-contact box size:
.060 [1.52] sq.
I Mini-Tandem Spring
Housings can be stacked
on .100 [2.54] centers in
either direction
I Mini-Tandem
Mini-Tandem Spring
Mini-Tandem Spring
Specifications
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.) — gold plated
contacts
18 milliohms (max.) — tin plated
contacts
Durability — Ref. Product
Specification 108-25031
Spring Housings are
Recognized under the
Component Program of
Underwriters
Receptacle Contacts are
designed to mate with .025
[0.64] posts. When used
individually, they will mate
with posts as short as .125
[3.18] and when used in a
housing, they will mate with
.140 [3.55] long posts.
These versatile contacts
may be used for
Receptacle Contacts are
used in single- or double-
row housings with .100
[2.54] centerline spacing.
Single-row housings can be
converted into double-row
connectors on .100 x .200
[2.54 x 5.08] centers with
the use of stacking clips.
R
Laboratories Inc.,
File No. E28476
I Certified by Canadian
5
Standards
R
Association,
File No. LR 7189
Mini-Tandem Spring
interconnecting posted
pc panels, I/O wiring and
cross-connecting pin
arrays.
Housings can be stacked
side-by-side or end-to-end
on .100 [2.54] centers.
The receptacle contact's
box configuration provides
for long contact life with
controlled contact mating
forces which minimize wear.
An external retention spring
facilitates quick assembly
and provides firm seating in
a contact housing.
266
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Mini-Tandem Spring Housings, Single-Row
.100 [2.54] Centerline
.550
[13.97]
.030
[0.76]
Material — Black glass-filled poly-
ester, 94V-0 rated
.036
[0.91]
.066
[1.68]
Technical Documents
pages 277, 278
—
.050
[1.27]
.100
[2.54]
Max.
A Max.
Product Specification
108-25031
Application Specification
114-25021
.050
[1.27]
.100
[2.54]
B Spaces
@ .100 [2.54] = C
Minimum mating post length is .140 [3.55].
5
Dimensions
No. of
Pos.
Housing
Part No.
A
B
1
C
2
.200 [5.08]
.100 [2.54]
.300 [7.62]
530554-1
530554-3
4
.400 [10.16]
.800 [20.32]
1.200 [30.48]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
3
8
7
.700 [17.78]
1.100 [27.94]
1.500 [38.10]
1.700 [43.18]
1.900 [48.26]
2.100 [53.34]
530554-7
12
16
18
20
22
11
15
17
19
21
1-530554-1
1-530554-5
1-530554-7
1-530554-9
2-530554-1
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
Material—Natural color nylon,
94V-2 rated
Keying Plug
Part No. 531226-1
(Plugs directly into housing)
Note: All part numbers are RoHS compliant.
267
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mini-Tandem Spring Housings, Double-Row
.100 [2.54] Centerline
.550
[13.97]
.030
[0.76]
.036
[0.91]
Material — Black glass-filled
polyester, 94V-0 rated*
.066
[1.68]
Technical Documents —
pages 277, 278
A Max.
Product Specification
108-25031
.200
[5.08]
Application Specification
.100
[2.54]
Max.
114-25021
.100
[2.54]
.050
[1.27]
B Spaces
@ .100 [2.54] = C
Minimum mating post length is .140 [3.55].
5
Material — Natural color nylon,
94V-2 rated
Dimensions
No. of
Pos.
Housing
Part No.
A
B
2
3
5
7
C
6
8
.300 [7.62]
.400 [10.16]
.600 [15.24]
.800 [20.32]
.200 [5.08]
.300 [7.62]
.500 [12.70]
.700 [17.78]
530902-1
530902-6
12
16
2-530902-0
3-530902-0
Keying Plug
Part No. 531226-1
(Plugs directly into housing)
Note: Mini-Tandem Spring contacts for use in these housings are shown on page 269.
*Consult TE for specific
UL recognition.
Note: All part numbers are RoHS compliant.
268
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mini-Tandem Spring Contacts
.060
[1.52]
Receptacle Contacts
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating C — Duplex plated .000050
[0.00127] over matte tin in contact area,
over .000030 [0.00076] nickel on entire
contact
.060
[1.52]
.085
[2.15]
Contact
Area with
Gold Inlay
Min.
Plating D — .000100 [0.00254] min.
matte tin over .000030 [0.00076] nickel on
entire contact
Technical Documents —
Low Pressure Contacts
pages 277, 278
Miniature
Applicator for
Applicator for
AMP-O-MATIC
Wire Size Range
Contact Part No.
Strip Form Loose Piece
Ins. Dia.
Range
Finish
Product Specification
108-25031
mm2
AMP-O-LECTRIC Stripper/Crimper
AWG
Machine*
Machine
Application Specification
114-25021
Plating A 5531216-3
Plating B 5531216-1
5531216-4
5531216-2
0.36-0.54
[0.64-1.37]
26-22
0.14-0.32
466819-2
466943-1
Standard Pressure Contacts
Miniature
Applicator for
AMP-O-MATIC
Wire Size Range
Contact Part No.
Strip Form Loose Piece
Ins. Dia.
Range
Applicator for
Finish
AWG
mm2
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
Plating B
530901-2
530901-3
.025-.054
32-28
0.03-0.08
Plating C 5530901-6
Plating D 5530901-4
Plating B 5530553-4
Plating C 5530553-6
Plating D 5530553-2
5530901-7
466723-1
466952-1
[0.64-1.37]
5530901-5
5
—
—
—
.036-.054
[0.91-1.37]
26-22
0.14-0.32
466819-2
466943-1
High Pressure Contacts
Miniature
Applicator for
AMP-O-MATIC
Wire Size Range
Contact Part No.
Strip Form Loose Piece
Ins. Dia.
Range
Applicator for
Finish
AWG
mm2
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
.025-.054
32-28
26-22
0.03-0.08
0.14-0.32
Plating B 5531225-6
Plating B 5531224-6
—
—
466723-1
466952-1
[0.64-1.37]
.036-.054
[0.91-1.37]
466819-2
466943-1
*For use with AMP-O-LECTRIC Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-522-6752)
for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as
other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268.
They cannot be used in AMPMODU Mod IV Housings.
2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above.
3. Application tooling is described on pages 270 & 275.
Note: All part numbers are RoHS compliant.
269
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Application Tooling for Wire Crimp Contacts
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-to-
board connectors. Refer to
page 88 to determine the
applicable connectors.
AMP-O-LECTRIC Model “G” Terminating Machine
(Shown with Optional Crimp Force Monitor)
A totally new design of our
most popular machine for
bench-top operation. It
features a quiet and reliable
direct motor drive, electronic
controls for easy setup and
operation, and improved
guarding and lighting for
operator convenience and
safety. All versions include
either manual or automatic
precision adjustment for
crimp height.
For further details, request
TE Catalog 65828.
AMP-O-MATIC Stripper/Crimper Machine
This machine automatically
strips as well as terminates
individual wires. Similar to
the AMP-O-LECTRIC Model
“G” machine, applicators
are quickly interchangeable,
and it includes precision
adjustment for crimp height.
All adjustments can be made
from the front of the machine,
without special tools.
Applicators
Several terminating
machines, including the
AMP-O-LECTRIC Model “G”,
AMP-O-MATIC Stripper/
Crimper and AMPOMATOR
CLS machines, are
designed for use with
interchangeable
applicators. Basic styles are
quickly interchangeable to
minimize costly downtimes,
and feature dial-in wire and
insulation crimp height
settings. Special applicators
are available for use with
the Crimp Force Monitor
(see page 272), for
5
For further details, request
TE Catalog 65004.
measuring the crimp height
of each termination as it is
made, plus evaluating the
quality of each crimp.
EDGE, Electronic Applicator
Counter
The new versatile EDGE
applicator counter tracks
wearable tool usage for the
most effective maintenance
planning. The completely
electronic counter with clear
LCD display, indicates
cycles since installation.
By performing maintenance
at measured intervals with
pre-set limits, operators
avoid breakdowns and
rejects caused by tool wear
or mid-adjustment. For more
information, request catalog
1773385.
Heavy Duty Miniature
Applicators
270
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling for Wire Crimp Contacts (Continued)
AMP 3K/40 and AMP 5K/40
Terminators
As a value oriented
terminator, the AMP 3K/40
and AMP 5K/40 are
designed for customers
that require the increased
output and quality of a
semiautomatic machine at
a competitive price. By
incorporating the most
commonly requested
features as standard and
offering a long list of
optional equipment, these
terminators offer flexibility to
meet the specific needs of
various applications at the
lowest possible cost.
AMP 5K/40 Terminator
Optional Stripping Module for
the AMP 3K/40, AMP 5K/40 and
the AMP-O-LECTRIC Model G
The combination of the
Stripping Module with the
AMP-O-LECTRIC Model G
Terminator or the AMP
3K/40, 5K/40 provides an
economical, proficient
method of stripping wire
and crimping terminals on
the same machine. Wires
are stripped moments
before crimping, meaning
there is virtually no chance
of damaging wire
5
conductors during handling
or storage. Once the wire is
fed into the start sensor, the
Stripping Module does the
rest, improving placement
accuracy. For more
information, request catalog
1309085.
271
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Application Tooling for Wire Crimp Contacts (Continued)
Tooling shown on this page
is designed to terminate
wire crimp contacts used in
various AMPMODU wire-to-
board connectors. Refer to
page 88 to determine the
applicable connectors.
The AMPOMATOR
AMPOMATOR System III Leadmaker
System III is an automatic
machine for the production
of terminated wire leads.
The machine combines
state of the art technology
to process single and
double wire application
utilizing the wire processing
industry’s best and most
friendly subsystems and
accessories available to
meet the latest market
requirements for wire lead
production.
Crimp Force Monitor (CFM)
The new machine
incorporates a servo-driven,
software-controlled
AMP-O-LECTRIC ST III
terminator and the next
generation System III
Applicator.
Your quality program calls
for more than a good
crimping system. It
See catalog 1654956-5 for
more information.
demands proof - the proof
you get with the SLE Crimp
Force Monitor. It has high-
resolution piezo-quartz
sensor technology for a
more precise identification
of typical crimping faults.
The monitor features Zone &
Peak Force Analysis,
128x128 Dot Matrix, Force
Trigger and Encoder
Proximity Trigger, and
Absolute Force
straight-line die closure, ter-
minal locator and support,
and insulation crimp adjust-
ment. TE hand tools also
can be adapted for use with
pneumatic tooling assem-
blies, providing air operated
crimping capabilities.
Premium CERTI-CRIMP Straight
Action Hand Tool (SAHT)
Commercial PRO-CRIMPER III
Hand Tool
5
Measurement for real-time
monitoring of every crimp.
The CFM can be used with
bench or fully-automatic
machines. Special
For further details on TE
straight action hand tools,
request TE Catalog 65780.
For more details on TE
pneumatic tooling assem-
blies, call the TE Technical
Support Center,
TE hand tools are ideal for
small production and proto-
type applications. They fea-
ture ratchet control to help
eliminate partial crimps,
applicators are not required.
Sure, you can sample and
test crimp height with a
micrometer. In fact, that’s
how you standardize your
process. But for ongoing
quality control, testing every
crimp, SLE is the choice. It’s
known worldwide, and
meets our standards for a
high performance
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shouldered-
style die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and to
help minimize contact rota-
tion and bending during
crimping. Approximate
1-800-522-6752.
terminating system. That’s
how you can be sure.
High quality crimping - with
verification - means higher
production and productivity.
weight 1.3 lb [0.60 kg].
272
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applica-
ble connectors.
Pistol Grip Manual and
Air Powered Tools
The manual pistol grip tool
features an interchange-
able modular terminating
head which also can be
used in the pneumatic ver-
sion, the Bench Mount
Pneumatic Power Assembly
and the IDC Electric Power
Unit. The head terminates
one unstripped wire per
cycle and indexes the con-
nector to the next terminat-
ing position. The head
Manual Pistol Grip
Tool No. 58074-1
Pneumatic Pistol Grip
Tool No. 58075-1
rotates to permit optimum
access to the wiring area.
The Bench Mount Pneumatic
Power Assembly is air actu-
ated with either a foot or
knee switch. This capability
frees the operator’s hands
for optimum positioning.
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
58395-1 (for Level V IDC connectors)
58540-1 (for MTE connectors, discrete
wire or flat ribbon cable)
Bench Mounted Pneumatic Power Assembly
No. 58338-1
IDC Electric Power Unit
This electrically powered
semiautomatic bench
5
machine is designed for
applying AMPMODU MTE
and MT connectors to dis-
crete wires. It is portable
and compact and uses
existing pistol grip modular
heads. The heads are easily
interchanged to run different
products. *The IDC Electric
Power Unit’s cycle rate is
approximately 7,200 cycles
per hour, with exact produc-
tion rates depending upon
operator dexterity.
Modular Head
Tool No. 58540-1
IDC Electric Power Unit
No. 931800-1
Modular Heads:
58062-1 (for MT connectors)
58336-1 (for MTE connectors)
*A tube-fed track assembly, Part No.
856675-1, also can be used with
MTE Connectors.
This modular head tool can
be used on any pistol grip
tool. It was designed for dis-
crete wire or flat ribbon cable
applications.
Note: All part numbers are RoHS compliant.
273
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors (Continued)
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the appli-
cable connectors.
Tube-Fed Ribbon Cable Machine
Tube-Fed Ribbon Cable Machine No. 856002-1
Designed for bench appli-
cations, this machine is
spring-driven unit which
conveys connectors
pneumatically operated and through the product tube to
controlled by a foot pedal. It the terminating station. The
terminates connectors onto
end-notched ribbon cable.
*The connectors are sup-
plied in strip form and in
plastic tubes. The machine
consists of three basic sub-
assemblies: a feed track, a
terminating station and a
seating station. The feed
track is a constant force,
air-operated terminating sta-
tion positions and termi-
nates contacts onto the
notched cable. The seating
station is manually operated
and seats connector hous-
ings onto the terminated
contacts.
*At a rate of 13-25 positions at a time.
5
2700 lb. Power Unit With
Cable Notching Die
Equipped with a cable
notching die an adapter kit,
this fully pneumatic bench
machine provides the 2700 lb
[12 010N] force required for
end-notching ribbon cable.
It features a grooved cable
support plate, a pressure
plate and a cable stop to
facilitate cable alignment
and positioning during the
notching process.
Notching Dies:
854449-1 (for 24-22 AWG
[0.2-0.6 mm2] Wire
854449-2 (for 28-26 AWG
[0.08-0.15 mm2] Wire
2700 lb. Power Unit
No. 312522-1
Note: All part numbers are RoHS compliant.
274
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors (Continued)
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the applica-
ble connectors.
CHAMPOMATOR Model 2.5 Terminating Machine No. 354786-(*)
This compact bench
and programmed by a
membrane switch key-
board. It also has an inter-
nal storage capability for
retaining up to 350 cable
assemblies. Connectors
can be terminated with
either straight or right-angle
wire dress.
*For applicable dash nos.,
call the Technical Support
Center: 1-800-522-6752.
For further details, request
TE Catalog 82247
machine terminates wires
manually sorted from
multiconductor cables.
Termination sequence may
include full termination of all
contacts, or selective termi-
nation. Designed for easy
programming, the machine
is microprocessor controlled
CHAMPOMATOR Model 3A Terminating Machine No. 761420-(*)
5
This floor model machine
automatically sorts wires
from multiconductor jack-
eted cable and terminates
them in a user-determined
controlled and programmed
by a touchscreen. It also has
an internal storage capability
for retaining up to 50 cable
assemblies. Connectors can
*For applicable dash nos.,
call the Technical Support
Center: 1-800-522-6752.
For further details, request
TE Catalog 82247
sequence; either full termina- be terminated with either
tion of all contacts, or selec-
tive termination. Designed
for easy programming, the
machine is microprocessor
straight or right- angle wire
dress. All cable assemblies
are tested for continuity and
shorts.
Note: All part numbers are RoHS compliant.
275
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Technical Documents for Board-to-Board Products
Various technical documents Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineers.
are available for your use.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
108-1956
PC/104 and PC/104-Plus Connector Systems
Receptacle Assemblies and Unshrouded Breakaway Headers, Surface-Mount — Pages 109, 110, 185-192:
108-25017 AMPMODU Interconnection System, Two-Piece
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
108-16
ACTION PIN Contacts
108-25017 AMPMODU Interconnection System, Two-Piece
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly
and Header
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163:
108-16
ACTION PIN Contacts
108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle
Assembly and Header
Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
114-13021 PC/104 and PC/104-Plus Connectors
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
114-9009
AMPMODU Header, Two-Piece, Double Row, Application of
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
114-25018 AMPMODU Mod. II and IV Receptacle Assembly, PC Board Mounted, Vertical,
Application of
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163-167:
114-25028 ACTION PIN Contacts with TE Headers, Application
5
114-13011 AMPMODU .025 and .045 Square Continuous Posts
Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
PC/104 and PC/104-Plus Connectors — Pages 5-12:
408-8502
408-8503
408-8504
Future Board Assembly 1424685 for PC/104 and PC/104-Plus Connectors
Seating Tool Assembly 1424686 for PC/104 and PC/104-Plus Connectors
Pneumatic Seating Tool Assembly 1424930-1 for PC/104 and PC/104-Plus
Connectors
408-8505
Manual Seating Tool Assembly 1424931-1 for PC/104 and PC/104-Plus Connectors
Two-Piece Printed Circuit Board Connectors — Pages 193-202:
408-2636
408-9054
ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
Seating Tools
Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192:
408-7411 Suggestions for Wave Soldering Vertical AMPMODU Receptacles
.025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163:
408-2636
408-6944
408-7977
408-7878
408-9054
408-9707
ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7
TE Uninsulated Bandolier Post Insertion Tool 91419-1
AMPMODU Double Row, Straight Posts, End Shrouds .100 x .100 [0.64 x 0.64] Centers
AMPMODU Header Barrier Inserts
ACTION PIN Contact Headers Seating Tool, 91170 Series
Tool Kit 314818-1 for Breakaway Headers
Handbook
5697
Guide to Application of ACTION PIN Contact Connectors
Note: All part numbers are RoHS
compliant.
276
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Technical Documents for Wire-to-Board Products
Various technical documents Product Specifications describe technical performance characteristics and verification tests.
are available for your use.
They are intended for the Design, Component and Quality Engineers.
Locking Clip Contacts and Housings — Pages 206-209:
108-36028 Connector, Locking Clip, .025 [0.64] Square, Gold
108-36028-1 Connector, Locking Clip, .025 [0.64] Square, Tin
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
108-25007 AMPMODU Mod. V Interconnection System, Wire-Applied (High Pressure)
108-25019 AMPMODU Mod. IV Male Connectors
108-25020 AMPMODU Mod. IV Interconnection System, (Standard Pressure)
108-25021 AMPMODU Mod. IV.V Interconnection System, (Intermediate Pressure)
Short-Point Wire-Applied Contacts and Housings — Pages 221-224:
108-1472
Short-Point Contacts and Housings
AMPMODU MTE Interconnection System — Pages 225-252:
108-25034 AMPMODU MTE Connectors
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
108-25015 AMPMODU MT Standard Pressure Connectors
108-25018 AMPMODU MT High Pressure Connectors
108-25030 AMPMODU MT Shielding Accessories
AMPMODU Level V, IDC Connectors —
108-25028 Interconnection System, Insulation Displacement Connector, IDC Level
Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
108-25031 Tandem Spring Receptacle Contact
Application Specifications describe requirements for using the product in its intended application,
and/or crimping information. They are intended for the Packaging and Design Engineers and the
Setup person.
Locking Clip Contacts and Housings — Pages 206-209:
114-25006 Contact, Locking Clip, .025 [0.64] Square, Application of
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
114-25003 AMPMODU Mod. IV (Standard Pressure), AMPMODU Mod. IV.V (Intermediate
Pressure) and AMPMODU Mod. V (High Pressure) Receptacle Contacts,
Application of
5
114-25016 AMPMODU Mod. IV Crimp Pin Contact
Short-Point Wire-Applied Contacts and Housings — Pages 221-224:
114-25038 Short-Point Contacts and Housings
AMPMODU MTE Interconnection System — Pages 225-252:
114-25026 AMPMODU MTE Interconnection System
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
114-25032 AMPMODU MT Interconnection System and Shielding Accessories,
Application of
AMPMODU Level V, IDC Connectors —
114-25020 Interconnection System, IDC Level V, Application of
Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
114-25021 Tandem Spring Receptacle Contact, Application of
Note: All part numbers are RoHS compliant.
277
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Technical Documents for Wire-to-Board Products (Continued)
Instruction Sheets provide instructions for assembling or applying the product. They are intended
for the Manufacturing Assembler or Operator.
Locking Clip Contacts and Housings — Pages 206-209:
408-7604
408-7606
408-7627
408-8547
408-9388
TE Extraction Tool 91084-1
TE Locking Clip Contacts and Connectors
TE Hand Crimp Tool 90295-1, 28-30 AWG Wire
TE Hand Crimp Tool 91533-1, 22-26 AWG Wire
TE Hand Crimp Tool 90431-1, 20 AWG Wire
Mod. IV Wire-Applied Contacts and Housings — Pages 210-220:
408-4379
408-7935
408-8547
408-9451
408-9453
TE PRO-CRIMPER II Hand Tool
AMPMODU Receptacle Connectors with Strain Relief/Pull Tabs
TE Hand Tool 91516-1, 91517-1 and 91541-1
TE Extraction Tool 843473-1 for AMPMODU Wire-Applied Housings 86308
TE Extraction Tools 843996 and 843477 for Removing AMPMODU Crimp Snap-In
Receptacle Contacts from Wire-Applied Housings
AMPMODU MTE Interconnection System — Pages 225-252:
409-5746
409-5832
408-6789
408-6790
408-6919
408-8547
408-9230
408-9359
408-9393
408-9407
408-9453
TE Electric Power Unit 931800-1
MTE Ribbon Cable Terminator 856002-1
TE Pneumatic Pistol Handle 58075-1
TE Manual Pistol Handle 58074-1
AMPMODU MTE Connectors
TE Hand Crimp Tool 91518-1 and 91551-1
TE Keying Tool 91417-1
MTE Modular Terminating Head 58336-1
TE Pneumatic Bench Assy. 58338-1
TE Hand Crimp Tool 91531-1 and 58342-2
TE Extraction Tools 843996 and 843477 for Removing AMPMODU Crimp Snap-In
Receptacle Contacts from Wire-Applied Housings
Ribbon Cable Notcher 854449-[]
408-9515
AMPMODU MT and Shielded MT Interconnection System — Pages 255-265:
408-6532 AMPMODU MT Connectors
AMPMODU Level V, IDC Connectors —
408-6843 TE Extraction Tool 91409-1
5
Standard Tandem Spring and Mini-Tandem Spring Receptacle Contacts — Pages 266-269:
408-7909 TE Hand Crimping Tool 91540-1
Note: All part numbers are RoHS compliant.
278
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Level V IDC Connectors, .125 x .125 [3.18 x 3.18] Centerline
Product Facts
I Termination of discrete
wire sizes 26-22 AWG
[0.12-0.3 mm2] as well as
jacketed cable and bonded
ribbon cable (conductors
separated)
I Connectors stackable end-
to-end and side-to-side on
.125 [3.18] centers
I Connectors preloaded with
insulation displacement
receptacle contacts
I Contact design employs
dual cantilever beams,
redundant insulation
displacement slots, built-in
post stop and wire support
crimp
I Copper alloy contacts are
duplex plated
I Snap-on covers with or
without cable tie paddles
I Full line of mass
termination tooling offers
lowest installed costs for
most production needs
AMPMODU Level V IDC
connectors provide cost
effective discrete wire
connections that are
compatible with today's
telecommunications
Covers can be furnished
with and without a cable tie
paddle. The covers are
simply snapped onto a
housing after the connector
has been terminated.
Performance
Characteristics
I Recognized under the
Component Program of
Underwriters
Contact Current Rating —
3 amperes
Termination Resistance —
12 milliohms (max.)
Durability — Ref. Product
Specification 108-25028
(Interconnection System, Insulation
Displacement Connector, IDC Level)
Laboratories Inc.,
File No. E28476
R
packaging techniques.
These connectors are
designed to mate with .025
[0.64] sq. posts on .125 x
.125 [3.18 x 3.18] centers
and are comprised of
The receptacle contacts
feature the TE insulation
displacement crimp
technique for achieving top
quality, low cost
terminations. These
I Certified by Canadian
Standards
R
Association,
File No. LR 7189
Application Specification
114-25020 (Interconnection System,
IDC Level V, Application of)
double-row housings
contacts employ dual
cantilever beams for
preloaded with insulation
displacement receptacle
contacts, snap-on
redundant interface with a
mating post, an integral
post stop to limit post
mating depth and protect
the crimp termination, and
a wire support (strain relief)
crimp to prevent accidental
wire pull-out. The contacts
are made of high
6
hermaphroditic covers, and
a full line of mass termination
tooling to meet virtually
every production need. For
modular flexibility, connectors
can be stacked end-to-end
or side-to-side, maintaining
a .125 x .125 [3.18 x 3.18]
centerline spacing.
conductivity copper alloy
and are duplex plated.
279
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Receptacle Assemblies, Double-Row, .125 x .125 [3.18 x 3.18] Centerline
Housings Preloaded with
Insulation Displacement
Crimp Receptacle Contacts
.800
[20.32]
Material and Finish
.298
[7.57]
Housing — Black thermoplastic, flame
retardant
Contacts — Copper alloy, duplex
plated .000050 [0.00127] gold on
contact area, .000100 [0.00254] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
A
Note: Preloaded contacts accept max.
insulation dia. of .050 [1.27]. The mini-
mum point of contact, as measured from
front edge of housing, is .095 [2.41].
.059
[1.50]
B
.243
[6.17]
Technical Documents
pages 277, 278
—
.125
[3.18]
.125
[3.18]
Typ.
Product Specification
108-25028
Application Specification
114-25020
Receptacle assemblies can be
stacked end-to-end and side-to-
side on .125 x .125 [3.18 x 3.18]
centers.
Receptacle Assembly (Stamped1)
for 26-22 AWG
Dimensions
No. of
Pos.
A
B
[0.12-0.3 mm2] Wire
8
.493 [12.52]
.618 [15.70]
.743 [18.87]
.993 [25.22]
1.243 [31.57]
1.493 [37.92]
1.868 [47.45]
1.993 [50.62]
2.493 [63.32]
.375 [9.52]
.500 [12.70]
.625 [15.88]
.875 [22.23]
1.125 [28.58]
1.375 [34.93]
1.750 [44.45]
1.875 [47.63]
2.375 [60.33]
102935-4
102935-6
10
12
16
20
24
30
32
40
102935-8
6
1-102935-2
1-102935-6
1-102935-9
1-102935-3
2-102935-8
3-102935-6
1White ink stamped, one side—8- thru 12-position with AMP and arrow; 14- and 16-position with AMP, part no., and
arrow; 18- thru 40-position with AMP, part no., date code and arrow.
Notes: 1. Covers for these housings are shown on pages 281 & 282.
2. Termination tooling for these connectors are shown on page 273-275.
3. 14- and 18-position receptacle assemblies, as well as other sizes, can be made available upon request.
Consult TE.
Note: All part numbers are RoHS compliant.
280
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline
All covers illustrated here
and on the following page
can be used on the double-
row Level V IDC connectors
shown on page 280.
.603
[15.32]
.603
[15.32]
.125
[3.18]
Typ.
.125
[3.18]
Typ.
Material
Black thermoplastic, flame retardant,
94V-0 rated
A
A
Cover 103056 Series
without Cable Tie Paddle
Cover 103058 Series
with Cable Tie Paddle
.100
[2.54]
(2 Plc.)
Cable Tie
Paddle
Cable Tie
Paddle
C
.605
[15.37]
.605
[15.37]
B
.125
[3.18]
Typ.
.125
Typ.
[3.18]
D
1.105
[28.07]
A
A
Cover 103349 Series
with Wide Cable Tie Paddle
Cover 103350 Series
with Wide Cable Tie Paddle
and Polarization
Cover Part Nos.
No. of
Pos.
Dimensions
Without
Cable Tie
Paddle
With
With Wide With Wide
Cable Tie
Paddle
Cable Tie
Paddle
Cable Tie
Paddle and
Polarization
(Housing
6
Size)
A
B
C
D
E
8
.491 [12.47]
.616 [15.65]
.741 [18.82]
.991 [25.17]
1.241 [31.52]
1.491 [37.87]
1.991 [50.57]
2.491 [63.27]
.150 [3.81]
.285 [7.24]
.166 [4.22]
—
.125 [3.18]
.125 [3.18]
.200 [5.08]
—
—
—
—
—
—
—
103058-3
103058-4
—
103349-4
—
103350-4
—
10
12
16
20
24
32
40
64
—
—
—
—
—
—
—
.300 [7.62]
.300 [7.62]
—
.600 [15.24] 1.312 [33.32]
.750 [19.05] 1.820 [46.23]
.592 [15.04]
.592 [15.04]
—
.416 [10.57]
.541 [13.74]
—
.916 [23.27]
1.166 [29.61]
103349-1
103349-5
—
103349-2
103349-3
103350-1
103350-5
—
103350-2
103350-3
—
—
.400 [10.16]
1-103056-0 1-103058-0
—
—
—
—
—
—
See page 282 for Double Cable Tie Paddle versions.
Notes: 1. Two hermaphroditic covers of any style can be installed on a double-row connector housing.
2. Other sizes can be made available upon request.
Note: All part numbers are RoHS compliant.
281
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline (Continued)
.100
[2.54]
Typ.
1.312
Typ.
[33.32]
.603
[15.32]
.125
[3.18]
Typ.
.600
Typ.
[15.24]
Cable Tie Paddle
3.991
[101.37]
1.103
[28.02]
Cover Part No. 104583-1, 64-Position
with Double Cable Tie Paddle
.100
[2.54]
Typ.
1.312
Typ.
[33.32]
.603
[15.32]
.125
[3.18]
Typ.
.600
Typ.
[15.24]
.916
[23.27]
6
Cable Tie Paddle
3.991
[101.37]
1.103
[28.02]
Cover Part No. 104584-1, 64-Position
with Double Cable Tie Paddle
and Polarization
Note: All part numbers are RoHS compliant.
282
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System
Product Facts
I Rugged connector system
featuring .031 x .062
[0.79 x 1.57] posts with
mating receptacles
I Current rating 5 amps max
per contact. Varies due to
ambient temperature, wire
size and duty cycles.
I Available for board-to-board
and wire-to-board
applications
I Posts available on strip
for machine application
directly to pc board or in
housings for board
mounting
I Receptacles available for
board mounting or wire
crimping
I Contacts available in both
tin and gold plating
I Flame retardant
thermoplastic housings
94V-0 rated
I Locking Clip contacts
available to mate with
.031 x .062 [0.79 x 1.57]
posts
The .031 x .062 [0.79 x 1.57] capabilities. Machine
configurations do not
I Recognized under the
Component Program of
Underwriters
interconnection system
has served as an industry
standard for modular
packaging for over three
decades. It is a rugged,
large scale system
applied terminations,
through matched
application equipment,
are geared to virtually any
production requirement,
lend themselves to the
economies of assemblies,
TE can provide for the
discrete location of
Laboratories Inc.,
R
File No. E28476
individual posts and
I Certified by Canadian
assuring the lowest possible receptacles.
Standards
designed for board-to-board applied cost.
and board-to-wire or cable
R
If your interconnections
require Top Entry, Bottom
Entry and/or Side Entry for
perpendicular, parallel and
stacked configurations, the
.031 x .062 [0.79 x 1.57]
interconnection system can
fulfill your needs with the
lowest applied cost through
efficient interconnections
and supporting application
equipment.
Association,
Crimp snap-in receptacles
File No. LR 16455
applications that has offered
millions of reliable
for 26-18 AWG [0.12 –
0.9mm2] wire provide
excellent discrete wire
terminations. Housings for
these contacts provide for
ease of handling
interconnections and
countless mating cycles.
This versatile interconnection
system successfully meets
the requirements for most
modular power supply
packaging.
terminations in high density
applications.
AMPMODU mating posts
are supplied typically as
header assemblies. They are
available in various sizes to
meet the interconnection
and packaging requirements
of your system. However, in
instances where packaging
Board mounted receptacles
and receptacle assemblies
are available in various
geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking
7
283
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System (Continued)
Locking Clip
Contacts
(Page 298)
Standard Profile
Locking Clip
Connector
(Page 299)
Housing, Unkeyed
for Crimp Snap-In
Receptacles
(Page 291 & 292)
Header, Right-Angle
Post, Keyed
(Page 297)
Board Mount
Receptacles,
Horizontal
and Vertical
Styles
(Pages 285 & 286)
Straight Posts
Machine Applied
(Page 294)
Board Mount
Receptacle
Assembly,
Vertical
Straight Posts
Machine Applied
(Page 294)
(Page 287)
Header, Straight Post
(Pages 295 & 296)
Header, Right-Angle
Post, Keyed
(Page 297)
Board Mount
Receptacle
Assembly,
Horizontal
Low Profile
Housing, Keyed
(Page 293)
Header, Right-Angle
Post, Keyed
(Page 297)
(Pages 288 & 289)
Receptacles,
Crimp Snap-In
(Page 290)
Rugged-self supporting, one-
piece contact body
The AMPMODU receptacle
cross-section is primarily
rectangular, with rounded
corners. Two integral
This design also permits
the use of the receptacles
without housings or
encapsulation.
Wide entry for post to
receptacle
misalignment
cantilever beams contact
the mating square or
rectangular posts.
Note: Application of a
contact lubricant is part of
the manufacturing process
of all AMPMODU tin-plated
crimp products. However,
it is not part of the
Deflection of these spring
members is limited by anti-
overstress and excessive
permanent deformation is
prevented. This feature
allows a wide range of
tolerances for misalignment
of mating contacts.
Reliability-dual
cantilever spring
contact design
and built-in
anti-overstress
Insulation Support
Barrel
Offers high or low
contact forces
manufacturing process of
products that customers will
solder, then clean. For these
products, TE recommends
that customers purchase a
contact lubricant. (See
application specification
114-25004 for further
7
Wide
Misalignment
Tolerance
Cantilever
Beams
The configuration of the
receptacle completely
encloses the spring
members preventing
damage during handling
and assembly and makes
the system compatible with
automatic application
techniques.
information.)
Anti-overstress
Wire Crimp Receptacle
284
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline
Receptacle Styles
Vertical and Horizontal
Board Mount
.093
[0.99]
Max.
.093
[0.99]
Max.
.125
[3.18]
.125
[3.18]
Max.
Max.
.300
[7.62]
.300
[7.62]
Bottom
Post Entry
Type A
.093
Max.
[2.36]
Top
Post Entry
Type B
.125
[3.18]
Max.
.300
[7.62]
Horizontal
Post Entry
Type C
Related Product Data
Recommended Board Layout for
Type C — page 288
Recommended Board Layout for Receptacle Assemblies
and Individual Receptacles (Type A and B)
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Application Tooling —
pages 300-304
.003
2J
[
0.08]
.100
[2.54]
.003
0.08]
Min.
J
[
Performance Specifications —
page 305
Technical Documents —
page 305
.055
[1.40]
Min.
.125 .002
[3.18 0.05]
.125
[3.18]
Keying Plug
Round Hole
(Post Entry Type A or B)
7
J-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .150 [3.81]; for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board. For solder mask, see
TE Instruction Sheet 408-7411.
Part No. 86181-2
Use in Board Mount Receptacles
Note: Drawings depict normal use of the contact in a one or two-sided circuit board. When using plated thru-holes,
refer to TE Engineering Report ER-001 and TE Instruction Sheet 408-7411. For solder mask, see TE Instruction Sheet
408-7411.
Note: All part numbers are RoHS compliant.
285
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Receptacles, Board Mount, .031 x .062 [0.79 x 1.57] Centerline (Continued)
Material and Finish
Copper alloy, plated as follows:
.210
[5.33]
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
.010
[0.25]
Max.
.020
[0.51]
Max.
.210
[5.33]
Plating B — .000079 [0.00201] min.
tin on entire contact
Plating C — (Solder Resist) —
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area,
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished
Standard Pressure
Receptacle
High Pressure
Receptacle
Standard Pressure
Part Nos.
Strip Form Loose Piece
High Pressure
Board
Thickness
Range
Dimension
Insertion
Part Nos.
Type
T
Finish
Applicator No. for
(Ref. Pg. 285)
“U” Frame Machine
Strip Form Loose Piece
Plating A
Plating B
86477-2
86477-3
87772-2
87003-1
87003-2
87774-2
85487-4
85487-3
86480-2
—
—
87316-3
—
—
—
466376-1
466376-1
466376-1
466376-1
466376-1
466376-1
A
.070-.055 [1.78-1.40]
.112 [2.84]
Plating C (Solder Resist)
Plating A
—
—
87105-1
—
—
—
B
C
.070-.055 [1.78-1.40]
.103-.055 [2.62-1.40]
.112 [2.84]
.145 [3.68]
Plating B
—
—
Plating C (Solder Resist)
Plating A
—
—
—
85493-4
—
86432-8
86432-1
86434-6
86434-1
565967-3
Plating B
Notes: 1. All strip form parts in packaged quantities of 5,000 each.
2. All loose piece parts in packaged quantities of 500 each.
7
Note: All part numbers are RoHS compliant.
286
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Vertical Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
.046
[1.17]
Contact
Area
Single Row .156 [3.96]
Centerline
.182
[4.62]
.018
[0.46]
The letter A
stamped on
contact indicates
mating end of
receptacle.
X-X
.015
0.38]
B
[
A
Material and Finish
Housing — Black thermoplastic, 94V-0
.156
[3.96]
rated
Typ.
Contacts — Copper alloy, plated as
follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
.175 .007
[4.45 0.18]
Plating B — .000079 [0.00201] min.
+.010
.112-.000
+0.25
.300 .003
[7.62 0.08]
tin on entire contact
X
X
Plating C — (Solder Resist) —
.000030 [0.00076] gold over .000050
[0.00127] nickel on contact area,
.000500 [0.01270] aluminum on inside
area of solder tines; remainder of contact
unfinished
[2.84 0.00]
Type A
Type B
No.
of
Dimensions
Standard Pressure
High Pressure
Standard Pressure
A
B
Pos.
Plating A Plating B Plating C Plating B Plating A Plating B Plating C
2
3
.156 [3.96]
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.312 [7.92]
87984-2
87984-3
87984-4
87984-5
87984-6
87984-7
87984-8
87984-9
87983-2
87983-3
87983-4
87983-5
87983-6
87983-7
87983-8
87983-9
87989-2
87989-3
87989-4
87989-5
87989-6
87989-7
87989-8
87989-9
87993-2
87993-3
87993-4
87993-5
87993-6
87993-7
87993-8
87993-9
87986-2
87986-3
87986-4
87986-5
87986-6
87986-7
87986-8
87986-9
87985-2
87985-3
87985-4
87985-5
87985-6
87985-7
87985-8
87985-9
87990-2
87990-3
87990-4
87990-5
87990-6
87990-7
87990-8
87990-9
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
4
5
6
7
.936 [23.77] 1.092 [27.74]
1.092 [27.74] 1.248 [31.70]
1.248 [31.70] 1.404 [35.66]
1.404 [35.66] 1.560 [39.62]
Related Product Data
Recommended Board Layout —
page 288
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
8
9
10
11
12
13
14
15
16
17
18
19
20
1-87984-0 1-87983-0 1-87989-0 1-87993-0 1-87986-0 1-87985-0 1-87990-0
1-87984-1 1-87983-1 1-87989-1 1-87993-1 1-87986-1 1-87985-1 1-87990-1
1-87984-2 1-87983-2 1-87989-2 1-87993-2 1-87986-2 1-87985-2 1-87990-2
1-87984-3 1-87983-3 1-87989-3 1-87993-3 1-87986-3 1-87985-3 1-87990-3
1-87984-4 1-87983-4 1-87989-4 1-87993-4 1-87986-4 1-87985-4 1-87990-4
1-87984-5 1-87983-5 1-87989-5 1-87993-5 1-87986-5 1-87985-5 1-87990-5
1-87984-6 1-87983-6 1-87989-6 1-87993-6 1-87986-6 1-87985-6 1-87990-6
1-87984-7 1-87983-7 1-87989-7 1-87993-7 1-87986-7 1-87985-7 1-87990-7
1-87984-8 1-87983-8 1-87989-8 1-87993-8 1-87986-8 1-87985-8 1-87990-8
1-87984-9 1-87983-9 1-87989-9 1-87993-9 1-87986-9 1-87985-9 1-87990-9
2-87984-0 2-87983-0 2-87989-0 2-87993-0 2-87986-0 2-87985-0 2-87990-0
1.560 [39.62
1.716 [43.59]
1.716 [43.59] 1.872 [47.55]
1.872 [47.55] 2.028 [51.51]
2.028 [51.51] 2.184 [55.47]
2.184 [55.47] 2.340 [59.44]
2.340 [59.44] 2.496 [63.40]
2.496 [63.40] 2.652 [67.36]
2.652 [67.36] 2.808 [71.32]
2.808 [71.32] 2.964 [75.29]
2.964 [75.29] 3.120 [79.25]
Technical Documents —
page 305
7
Keying Plug
Part No. 86181-2
(Use in Board Mount
Receptacles)
Post Entry
Type A
Post Entry
Type B
Note: All part numbers are RoHS compliant.
287
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
Single Row .156 [3.96]
Centers
.018
[0.46]
.046
[1.17]
Contact
Area
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
.182
[4.62]
Contacts — Copper alloy, plated as
follows:
The letter A stamped
on contact indicates
mating end of recep-
tacle.
X-X
Plating A — Selectively plated
.000030 [0.00076] gold contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
.015
B
[
0.38]
Plating B — .000079 [0.00201] min.
tin on entire contact
A
.156
[3.96]
.333 .010
[8.46 0.25]
Typ.
.145
[3.68]
Post Entry
Type C
.175 .007
[4.45 0.18]
Related Product Data
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
.300 .003
[7.62 0.08]
X
X
Technical Documents —
page 305
.003
0.08]
2H
.003
0.08]
.003
0.08]
[
.003
0.08]
H
2H
2H
.003
0.08]
[
[
[
.003
0.08]
H
Recommended Board
Layouts for Receptacle
Assemblies and Individual
Receptacles (Type C)
.100
[2.54]
Max.
[
H
[
.055 .005
[1.40 0.13]
+.005
.340
[
]
+.005
+.005
-.000
[8.64+0.13]
-.000
.340
.340
[
]
[
]
-.000
[8.64+0.13]
[8.64+0.13]
.073 .003
[1.85 0.08]
Typ. Dia.
.073 .003
[1.85 0.08]
Typ. Dia.
.073 .003
[1.85 0.08]
Typ. Dia.
This configuration recommended
for use with machine applied posts
or headers with a .500 [12.70]
This configuration recommended
for use with machine applied posts
or headers with a .405 [10.29]
This configuration recommended
for use with machine applied posts
or headers with a .345 [18.76]
minimum mating end post length.*
minimum mating end post length.*
minimum mating end post length.*
7
The mating post length is depicted by the A dimension on page 294 (machine applied posts) and the C dimension on
pages 295-297 (headers).
Keying Plug
H-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .125 [3.18] for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board.
Part No. 86181-2
(Use in Board Mount
Receptacles)
Note: All part numbers are RoHS compliant.
288
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
No. of
Pos.
2
3
Dimensions
Standard Pressure
High Pressure
Plating B
A
B
Plating A
87988-2
Plating B
87987-2
.156 [3.96]
.312 [7.92]
87995-2
87995-3
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
87988-3
87987-3
4
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.54]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
87988-4
87987-4
87995-4
5
87988-5
87987-5
87995-5
6
87988-6
87987-6
87995-6
7
87988-7
87987-7
87995-7
8
87988-8
87987-8
87995-8
9
87988-9
87987-9
87995-9
10
11
12
13
14
15
16
17
18
19
20
1-87988-0
1-87988-1
1-87988-2
1-87988-3
1-87988-4
1-87988-5
1-87988-6
1-87988-7
1-87988-8
1-87988-9
2-87988-0
1-87987-0
1-87987-1
1-87987-2
1-87987-3
1-87987-4
1-87987-5
1-87987-6
1-87987-7
1-87987-8
1-87987-9
2-87987-0
1-87995-0
1-87995-1
1-87995-2
1-87995-3
1-87995-4
1-87995-5
1-87995-6
1-87995-7
1-87995-8
1-87995-9
2-87995-0
7
Note: All part numbers are RoHS compliant.
289
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Mod I Receptacles, Crimp Snap-In (Wire Applied),
.031 x .062 [0.79 x 1.57] Centerline
Material and Finish
Copper alloy, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000016 [0.00041] min.
tin on entire contact
Related Product Data
Housings used in — pages 291-293
Mate with Machine Applied
Posts — page 294
.125
[3.18]
Max.
Headers — pages 295-297
Application Tooling — page 300-304
Performance Specification —
page 305
.580
[14.73]
.280
[7.11]
Technical Documents —
page 305
.093
[2.36]
Max.
.014
[0.36]
Max.
Standard Pressure
Strip Form Loose Piece
Wire Size Range
AWG [mm2]
Ins. Dia.
Range
Finish
Packaged
Quantities
Part
Nos.
Packaged
Quantities
Part
Nos.
Plating A
Plating B
5,000
5,000
102099-2
102099-5
500
500
102103-2
102103-3
22-18 [0.3-0.9]
.051-.090 [1.30–2.29]
.210
[5.33]
Applicator (Standard Pressure)
Type
Premium
CERTI-CRIMP
Hand Tool
Wire Size Range
AWG [mm2]
Part
Number
Used With
Machine
Part Number
466764-3
466764-2
466764-1
466937-1
HDM
HDM
HDM
SCA
Model "G" (AMP-O-LECTRIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
Standard Pressure
Receptacle
22-18
[0.3-0.9]
90274-2
Stripper-Crimper (AMP-O-MATIC)
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult TE.
.020
[0.51]
Max.
High Pressure
Strip Form
Loose Piece
Wire Size Range
AWG [mm2]
Ins. Dia.
Range
Finish
Packaged
Part
Nos.
Packaged
Quantities
Part
Nos.
Quantities
Plating A
Plating B
Plating A
Plating B
5,000
102100-2
102100-5
102102-2
102102-5
500
500
500
500
102104-2
102104-3
102106-2
102106-3
22-18 [0.3-0.9]
26-22 [0.12-0.4]
.051-.090 [1.30–2.29]
0.42-.073 [1.07-1.85]
.210
[5.33]
5,000
5,000
5,000
Applicator (High Pressure)
Type
Premium
CERTI-CRIMP
Hand Tool
Wire Size Range
AWG [mm2]
High Pressure Receptacle
7
Part
Used With
Machine
Number
Part Number
466764-3
466764-2
466764-1
466937-1
466763-2
466763-1
HDM
HDM
HDM
SCA
HDM
HDM
Model "G" (AMP-O-LECTRIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
22-18 [0.3-0.9]
26-22 [0.12-0.4]
90274-2
90328-1
Stripper-Crimper (AMP-O-MATIC)
Model "K" (AMP-O-LECTRIC)
CLS IV+ (AMPOMATOR)
AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines and
Stripper/Crimper Machines. Consult TE.
Extraction Tool Part No. 843473-1
Part Instruction Sheet 408-9451
Note: All part numbers are RoHS compliant.
290
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers, Without Strain
Relief
.030 .010
[0.76 0.25]
Identifiers on ends of
housing are optional at
AMP’s discretion
.790
[20.07]
.015
0.38]
L
[
Material
Black thermoplastic, flame retardant,
94V-0 rated
.077
[1.96]
.120
[3.05]
Typ.
.250
[6.35]
Y
Y
Max.
Related Product Data
Contacts used with — page 290
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297
Locking Ledge
Identification
.156
[3.96]
Typ.
Y-Y
Performance Specifications —
page 305
.156 .003
[3.96 0.08]
.003
[ 0.08]
= B
A spaces @
Technical Documents —
page 305
Dimensions
B
.156 [3.96]
Housing Part Nos.
No. of
Pos.
A
1
L
Stamped1
Unstamped2
2-87025-5
2-87025-1
1-87025-3
2-87025-3
87025-2
2
3
.312 [7.92]
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
—
2
.312 [7.92]
—
4
3
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.744 [95.10]
—
5
4
—
6
5
87025-1
7
6
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.900 [99.06]
—
3-87025-4
1-87025-6
1-87025-0
1-87025-8
3-87025-6
1-87025-2
3-87025-0
3-87025-8
3-87025-2
2-87025-0
4-87025-0
87025-4
8
7
—
9
8
87025-9
10
11
12
13
14
15
16
17
18
19
20
25
9
1-87025-7
10
11
12
13
14
15
16
17
18
19
24
—
1-87025-1
—
—
—
—
—
—
—
—
—
7
87025-6
87025-8
5-87025-0
Notes: 1Markings on housing.
2No markings on housing.
Note: All part numbers are RoHS compliant.
291
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Mod I Receptacle Housings, Standard Profile, Unkeyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Single Row, .156 [3.96]
Centers, With Strain Relief
.992
[25.20]
.290
[7.37]
.206 .020
[5.23 0.51]
.040
[1.02]
.694
[17.63]
.397
[10.08]
.094
[2.39]
4 Plc.
Dia.
.446
[11.33]
.843
[21.41]
.298 [7.57]
Material
Black thermoplastic, flame retardant,
94V-0 rated
1.640
[41.66]
Related Product Data
Contacts used with — page 290
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
1.560
[39.62]
10 Position Receptacle Housing, Part No. 1-102090-0
Technical Documents —
page 305
7
Note: All part numbers are RoHS compliant.
292
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Mod I Receptacle Housings, Low Profile, Keyed,
.031 x .062 [0.79 x 1.57] Centerline
Locking Ledge
Identification
Identifiers on ends of
housing are optional at
AMP’s discretion
Single Row, .156 [3.96]
Centers
.030 .010
[0.76 0.25]
.640
[16.26]
.040
[1.02]
.125
[3.18]
.075
[1.91]
Typ.
.015
0.38]
L
[
.077
[1.96]
Material
Black thermoplastic, flame retardant,
94V-0 rated
.250
[6.35]
Max.
.120
[3.05]
Typ.
.156
[3.96]
Typ.
Related Product Data
Contacts used with — page 290
Mate with —
.156 .003
[3.96 0.08]
.003
0.08]
= B
A spaces @
[
Headers — pages 295-297
Performance Specifications —
page 305
Dimensions
B
No. of
Pos.
No. of
Keys
Housing Part Nos.
(Unstamped)1
Key
Locations
A
L
2
3
1
2
.156 [3.96]
.312 [7.92]
.312 [7.92]
1
1
87159-3
87159-4
A
A
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.900 [99.06]
Technical Documents —
page 305
4
3
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.744 [95.10]
2
87159-5
A,C
5
4
2
87159-1
A,D
6
5
3
87159-6
A,C,E
7
6
3
87159-7
A,C,E
8
7
4
87159-8
A,C,E,G
9
8
3
87159-9
A,D,G
10
11
12
13
14
15
16
17
18
19
20
25
9
5
1-87159-0
1-87159-1
1-87159-2
87159-2
A,C,E,G,J
A,D,G,K
10
11
12
13
14
15
16
17
18
19
24
4
6
A,C,E,G,J,L
A,D,J,M
4
7
1-87159-3
1-87159-4
1-87159-5
1-87159-6
1-87159-7
1-87159-8
1-87159-9
2-87159-4
A,C,E,G,J,L,N
A,D,G,K,N
A,C,E,G,J,L,N,Q
A,D,G,K,N,R
A,D,F,J,P,S
B,D,F,J,L,N,Q,S
A,C,E,G,J,L,N,Q,S,U
A,C,E,H,K,M,Q,S,U,W,Y
5
8
6
6
8
10
11
1No marking on housing.
Keying Plug
Keying Plug References
.160
[4.06]
Wire Exit Face
Material — Natural Color Nylon
Wire Exit Face
7
.050
[1.27]
Fits
through
.125 [3.18]
Dia. Hole
Keying Plug
87116-2
(Flush)
Keying Plug
87116-2
(Flush)
Post
Mating Face
Post
Mating Face
Part No. 87116-2
For Standard Housings
For Low Profile Housings
Note: All part numbers are RoHS compliant.
293
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Posts, Machine Applied, .031 x .062 [0.79 x 1.57] Centerline
Straight Posts
.150
Cut Off
[3.81]
.062
[1.57]
.003
0.08]
2D
[
.003
0.08]
D
[
.150
[3.81]
E
.080
[2.03]
.048
[1.22]
A
B
.078 .002
Dia.
Typical Assembly
[1.98 0.05]
.031
[0.78]
(Drilled Hole)
C
Recommended Mounting Holes
Material and Finish
Brass, plated .000030 [0.00076] gold
over .000050 [0.00127] nickel on entire
post
Related Product Data
Mate with —
Board Mount Receptacles —
D—Post centers may vary depending on requirements. Minimum nominal
centerline spacing between adjacent contacts is .125 [3.18]; .003 [0.08]
tolerances not to accumulate over length of board.
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
E—Post center location from edge of board may vary to satisfy application.
Crimp Snap-In Receptacles and
Housings — pages 290-292
Locking Clip Contacts &
Housings — pages 298, 299 (see page
298 for recommended post length).
Application Tooling —
pages 300-304
Dimensions
Finish
Part Nos.
Loose Piece2
A
B
C
Strip Form1
86147-7
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
Plating A
Plating B
86182-7
5086182-2
1-86182-5
5086182-9
2-86182-9
2-5086182-5
1-86182-8
2-5086182-2
86182-8
.360 [9.14]
.187 [4.75]
.595 [15.11]
5086147-2
1-86147-5
5086147-9
4-86147-2
3-5086147-7
1-86147-8
2-5086147-2
86147-8
Performance Specifications —
page 305
.380 [9.65]
.400 [10.16]
.480 [12.19]
.565 [14.35]
.800 [20.32]
.320 [8.13]
.125 [3.18]
.187 [4.75]
.187 [4.75]
.150 [3.81]
.748 [19.00]
.573 [14.55]
.715 [18.16]
.800 [20.32]
.998 [25.35]
Technical Documents —
page 305
5086147-1
1-86147-2
1-5086147-0
5086182-1
1-86182-2
1-5086182-0
1
2
Packaging quantity of 20,000 per reel.
Packaging quantity of 1,000 per bag.
Note: Strip form posts applied with Insertion Machine No. 3-457382-1, includes power unit and applicator.
7
Note: All part numbers are RoHS compliant.
294
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Headers, Straight Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
1.00
See chart
for locations
Typ. Keyway
[2.54]
.250 .010
[6.35 0.25]
.125
[3.18]
C
.085
[2.16]
.063 .002
[1.60 0.05]
.156 .003
[3.96 0.08]
.003
0.08]
Max.
= B
A spaces @
[
.031 .001
[0.79 0.03]
Typ.
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
.062
[1.57]
.405 .010
[10.29 0.25]
Posts — Brass, plated as follows:
.250 .010
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
min. nickel on entire post
Plating B — .000100-.000200
[0.00254-0.00508] tin over .000030
[0.00762] nickel on entire post
[6.35 0.25]
.125 .010
[3.18 0.25]
.035
[0.89]
.031
[0.79]
+.000
.040-.015
+0.00
Typ.
[1.02 0.38]
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Housings — pages 290-292
Keyway Locations
(Ref only)
Locking Clip Contacts &
Housings — pages 298 & 299 (see
page 298 for recommended post length).
Performance Specifications —
page 305
Post Height
D=.405 [10.29]
Post Height
D=.587 [14.91]
Dimensions
B
No. of
Keying
Slots
No. of
Pos.
Keyway
Locations
A
C
Plating A
Plating B
Plating A
87247-2
Plating B
5-87262-2
5-87262-3
5-87262-4
5-87262-5
5-87262-6
5-87262-7
5-87262-8
5-87262-9
6-87262-0
6-87262-1
6-87262-2
6-87262-3
6-87262-4
6-87262-5
6-87262-6
6-87262-7
6-87262-8
6-87262-9
7-87262-0
7-87262-1
7-87262-2
7-87262-3
7-87262-4
7-87262-5
2
1
2
.156 [3.96]
.312 [7.92]
.267 [6.78]
.423 [10.74]
.579 [14.71]
.735 [18.67]
.891 [22.63]
1.047 [26.59]
1.203 [30.56]
1.359 [34.52]
1.515 [38.48]
1.671 [42.44]
1.827 [46.41]
1.983 [50.37]
2.139 [54.33]
2.295 [58.29]
2.451 [62.26]
2.607 [66.22]
2.763 [70.18]
2.919 [74.14]
3.075 [78.11]
3.231 [82.07]
3.387 [86.03]
3.543 [89.99]
3.699 [93.95]
3.855 [97.92]
1
1
85829-2
85829-3
5-87160-4
5-87160-5
5-87160-6
5-87160-1
5-87160-7
5-87160-8
5-87160-9
6-87160-0
6-87160-1
6-87160-2
6-87160-3
5-87160-2
6-87160-4
6-87160-5
6-87160-6
6-87160-7
6-87160-8
6-87160-9
7-87160-0
7-87160-1
7-87160-2
7-87160-3
7-87160-4
7-87160-5
A
A
3
87247-3
Technical Documents —
page 305
4
3
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.276 [83.21]
3.432 [87.17]
3.588 [91.14]
3.744 [95.10]
2
85829-4
87247-4
A,C
5
4
2
85829-5
87247-5
A,D
6
5
3
85829-6
87247-6
A,C,E
.312 .003
[7.92 0.08]
7
6
3
85829-7
87247-7
A,C,E,
8
7
4
85829-8
87247-8
A,C,E,G
.156 .003
[3.96 0.08]
9
8
3
85829-9
87247-9
A,D,G
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
9
5
1-85829-0
1-85829-1
1-85829-2
1-85829-3
1-85829-4
1-85829-5
1-85829-6
1-85829-7
1-85829-8
1-85829-9
2-85829-0
2-85829-1
2-85829-2
2-85829-3
2-85829-4
2-85829-5
1-87247-0
1-87247-1
1-87247-2
1-87247-3
1-87247-4
1-87247-5
1-87247-6
1-87247-7
1-87247-8
1-87247-9
2-87247-0
2-87247-1
2-87247-2
2-87247-3
2-87247-4
2-87247-5
A,C,E,G,J
.125 [3.18]
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
4
A,D,G,K
6
A,C,E,G,J,L
A,D,J,M
4
.055 .003
[1.40 0.08]
Dia.
7
A,C,E,G,J,L,N
A,D,G,K,N
5
7
8
A,C,E,G,J,L,N,Q
A,D,G,K,N,R
A,D,F,J,M,P,S
B,D,F,J,L,N,Q,S
A,C,E,G,J,L,N,Q,S,U
A,D,G,K,N,R,U
A,C,E,G,J,L,N,Q,S,U,W
A,D,G,K,N,R,U,X
A,C,E,G,J,L,N,Q,S,U,W,Y
A,C,E,H,K,M,Q,S,U,W,Y
Recommended Board Layout
6
7
8
10
7
11
8
12
11
Note: All part numbers are RoHS compliant.
295
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Headers, Straight Post, Keyed,
.031 x .062 [0.79 x 1.57] Centerline (Continued)
Post Height
D=.750 [19.05]
Post Height
D=1.187 [30.15]
Post Height
D=1.310 [33.27]
Dimensions
B
No. of
Keying
Slots
Keyway
Locations
No. of
Pos.
A
C
Plating A
Plating B
5-85875-7
5-85875-8
5-85875-1
5-85875-2
5-85875-9
6-85875-0
6-85875-1
5-85875-3
6-85875-2
6-85875-3
5-85875-4
6-85875-4
6-85875-5
6-85875-6
6-85875-7
6-85875-8
6-85875-9
7-85875-0
7-85875-1
7-85875-2
7-85875-3
5-85875-5
7-85875-4
7-85875-5
Plating A
Plating B
Plating A
Plating B
5-85840-2
5-85840-3
5-85840-4
5-85840-5
5-85840-6
5-85840-7
5-85840-8
5-85840-9
6-85840-0
6-85840-1
6-85840-2
6-85840-3
6-85840-4
6-85840-5
6-85840-6
6-85840-7
6-85840-8
6-85840-9
7-85840-0
7-85840-1
7-85840-2
7-85840-3
7-85840-4
7-85840-5
2
1
2
.156 [3.96]
.312 [7.92]
.267 [6.78]
.423 [10.74]
.579 [14.71]
.735 [18.67]
.891 [22.63]
1.047 [26.59]
1.203 [30.56]
1.359 [34.52]
1.515 [38.48]
1.671 [42.44]
1.827 [46.41]
1.983 [50.37]
2.139 [54.33]
2.295 [58.29]
2.451 [62.26]
2.607 [66.22]
2.763 [70.18]
2.919 [74.14]
3.075 [78.11]
3.231 [82.07]
3.387 [86.03]
3.543 [89.99]
3.699 [93.95]
3.855 [97.92]
1
1
85923-2
85923-3
87283-2
87283-3
—
85839-2
85839-3
A
A
3
5-86207-2
4
3
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.276 [83.21]
3.432 [87.17]
3.588 [91.14]
3.744 [95.10]
2
85923-4
87283-4
5-86207-9
85839-4
A,C
5
4
2
85923-5
87283-5
5-86207-3
—
85839-5
A,D
6
5
3
85923-6
87283-6
85839-6
A,C,E
7
6
3
85923-7
87283-7
—
85839-7
A,C,E,
8
7
4
85923-8
87283-8
—
85839-8
A,C,E,G
9
8
3
85923-9
87283-9
—
85839-9
A,D,G
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
9
5
1-85923-0
1-85923-1
1-85923-2
1-85923-3
1-85923-4
1-85923-5
1-85923-6
1-85923-7
1-85923-8
1-85923-9
2-85923-0
2-85923-1
2-85923-2
2-85923-3
2-85923-4
2-85923-5
1-87283-0
1-87283-1
1-87283-2
1-87283-3
1-87283-4
1-87283-5
1-87283-6
1-87283-7
1-87283-8
1-87283-9
2-87283-0
2-87283-1
2-87283-2
2-87283-3
2-87283-4
2-87283-5
—
1-85839-0
1-85839-1
1-85839-2
1-85839-3
1-85839-4
1-85839-5
1-85839-6
1-85839-7
1-85839-8
1-85839-9
2-85839-0
2-85839-1
2-85839-2
2-85839-3
2-85839-4
2-85839-5
A,C,E,G,J
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
4
—
A,D,G,K
6
—
A,C,E,G,J,L
A,D,J,M
4
—
7
—
A,C,E,G,J,L,N
A,D,G,K,N
5
—
8
—
A,C,E,G,J,L,N,Q
A,D,G,K,N,R
A,D,F,J,M,P,S
B,D,F,J,L,N,Q,S
A,C,E,G,J,L,N,Q,S,U
A,D,G,K,N,R,U
A,C,E,G,J,L,N,Q,S,U,W
A,D,G,K,N,R,U,X
A,C,E,G,J,L,N,Q,S,U,W,Y
A,C,E,H,K,M,Q,S,U,W,Y
6
—
7
—
8
—
10
7
—
—
11
8
—
—
12
11
—
—
7
Note: All part numbers are RoHS compliant.
296
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Mod I Headers, Right-Angle Post, Keyed, .031 x .062 [0.79 x 1.57] Centerline
Single Row, .156 [3.96]
Centers
C
.031 .001
[0.79 0.03]
Typ.
.125 .010
[3.18 0.25]
.345 .010
[8.76 0.25]
1.56
[3.96]
A Spaces @
= B
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
.062 .001
See Table
for Locations
.100
[2.54]
[1.57 0.03]
Typ. Keyway
.275 .015
[6.99 0.38]
.250 .010
[6.35 0.25]
Posts — Brass, plated as follows:
Plating A — Selectively plated
.000030 [0.00076] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — .000015 [0.00038] gold
over .000050 [0.00127] nickel on entire
post
.125
[3.18]
+.000
.031
[0.79]
.040-.015
.131
[3.33]
+0.00
[1.02-0.38]
2 Plc.
Plating C — .000100-.000200
[0.00254-0.00508] tin over .000050
[0.00127] nickel on entire post
Related Product Data
Mate with —
Board Mount Receptacles —
pages 285, 286
Keyway Locations
(Ref Only)
Board Mount Receptacle
Assemblies — pages 287-289
Crimp Snap-In Receptacles and
Post Height
D=.345 [8.76]
Post Height
D=.500 [12.70]
Plating B
No. of
Keying
Slots
Dimensions
No. of
Pos.
Keyway
Locations
Housings — pages 290-292
A
B
C
Locking Clip Contacts and
Plating A
Plating C
5-87655-2
5-87655-3
5-87655-4
5-87655-5
5-87655-6
5-87655-7
5-87655-8
5-87655-9
6-87655-0
6-87655-1
6-87655-2
6-87655-3
6-87655-4
6-87655-5
6-87655-6
6-87655-7
6-87655-8
6-87655-9
7-87655-0
7-87655-1
7-87655-2
7-87655-3
7-87655-4
7-87655-5
Plating C
5-87194-1
5-87194-2
5-87194-3
5-87194-4
5-87194-5
5-87194-6
5-87194-7
5-87194-8
5-87194-9
6-87194-0
6-87194-1
6-87194-2
6-87194-3
6-87194-4
6-87194-5
6-87194-6
6-87194-7
6-87194-8
6-87194-9
7-87194-0
7-87194-1
7-87194-2
Housings — pages 298 & 299 (see
page 298 for recommended post length).
Performance Specifications —
page 305
2
1
2
.156 [3.96]
.312 [7.92]
.267 [6.78]
.423 [10.74]
.579 [14.71]
.735 [18.67]
.891 [22.63]
1.047 [26.59]
1.203 [30.56]
1.359 [34.52]
1.515 [38.48]
1.671 [42.44]
1.827 [46.41]
1.983 [50.37]
2.139 [54.33]
2.295 [58.29]
2.451 [62.26]
2.607 [66.22]
2.763 [70.18]
2.919 [74.14]
3.075 [78.11]
3.231 [82.07]
3.387 [86.03]
3.543 [89.99]
3.699 [93.95]
3.855 [97.92]
1
1
87654-2
87654-3
87258-2
87258-3
A
A
3
4
3
.468 [11.89]
.624 [15.85]
.780 [19.81]
.936 [23.77]
1.092 [27.74]
1.248 [31.70]
1.404 [35.66]
1.560 [39.62]
1.716 [43.59]
1.872 [47.55]
2.028 [51.51]
2.184 [55.47]
2.340 [59.44]
2.496 [63.40]
2.652 [67.36]
2.808 [71.32]
2.964 [75.29]
3.120 [79.25]
3.276 [83.21]
3.432 [87.17]
3.588 [91.14]
3.744 [95.10]
2
87654-4
87258-4
A,C
5
4
2
87654-5
87258-5
A,D
6
5
3
87654-6
87258-6
A,C,E
A,C,E
A,C,E,G
A,D,G
A,C,E,G,J
A,D,G,K
Technical Documents —
page 305
7
6
3
87654-7
87258-7
8
7
4
87654-8
87258-8
9
8
3
87654-9
87258-9
.312 .003
[7.92 0.08]
.156 .003
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
9
5
1-87654-0
1-87654-1
1-87654-2
1-87654-3
1-87654-4
1-87654-5
1-87654-6
1-87654-7
1-87654-8
1-87654-9
2-87654-0
2-87654-1
2-87654-2
2-87654-3
2-87654-4
2-87654-5
1-87258-0
1-87258-1
1-87258-2
1-87258-3
1-87258-4
1-87258-5
1-87258-6
1-87258-7
1-87258-8
1-87258-9
2-87258-0
2-87258-1
2-87258-2
2-87258-3
2-87258-4
2-87258-5
[3.96 0.08]
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
4
6
A,C,E,G,J,L
A,D,J,M
E
4
7
A,C,E,G,J,L,N,
A,D,G,K,N
.078 .002
[1.98 0.05]
Dia.
5
8
A,C,E,G,J,L,N,Q
A,D,G,K,N,R
7
Recommended Board Layout
6
7
A,D,F,J,M,P,S
8
B,D,F,J,L,N,Q,S
A,C,E,G,J,L,N,Q,S,U
A,D,G,K,N,R,U
A,C,E,G,J,L,N,Q,S,U,W
A,D,G,K,N,R,U,X
E Dimension
.345 [8.76] Post Height —
10
7
.250 [6.35] for mounting header flush
with board edge; .595 [15.11] for
supporting mating connector on board.
.500 [12.70] Post Height —
.250 [6.35] for mounting header flush
with board edge; .750 [19.05] for
supporting mating connector on board.
11
8
12
11
7-87194-3 A,C,E,G,J,L,N,Q,S,U,W,Y
7-87194-4 A,C,E,H,K,M,Q,S,U,W,Y
Note: All part numbers are RoHS compliant.
297
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Locking Clip Contacts for .031 x .062 [0.79 x 1.57] Posts,
.031 x .062 [0.79 x 1.57] Centerline
Wire Crimp Contacts with
Insulation Support
Material and Finish
Contact Body — Phosphor bronze,
plated as follows:
Spring
Body
Plating A — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Mating Post
Plating B — .000100 [0.00254] min.
tin over .000050 [0.00127] nickel on
entire contact
Contact Spring — Stainless steel
Wire Size
Range
AWG [mm2]
Contact Part Nos.
Ins. Dia.
Range
Related Product Data
Mate with —
Machine Applied Posts — page 294
Headers (.500 Post Height Only) —
pages 295-297 (see recommended post
length below)*
Finish
Strip Form
Loose Piece
Plating A
Plating B
87269-2
87278-2
22-18 [0.3-0.9]
.050-.0100 [1.27–2.54]
5-87269-1
5-87278-1
Housings used in — page 299
Application Tooling —
pages 300-304
Performance Specification — page
305
Applicator
Premium
CERTI-CRIMP
Hand Tool
Wire Size
Range
Part
Used With
Machine
Type
Number
AWG [mm2]
Part Number
466007-2
466950-2
HDM
SCA
Model "K" (AMP-O-LECTRIC)1
22-18 [0.3-0.9]
90308-1
Stripper/Crimper (AMP-O-MATIC)
1AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines. Consult TE.
Note: These contacts must be crimped in accordance with TE Specification No. 114-25008 in order to function
properly in a connector housing.
Technical Documents —
page 305
Extraction Tool Part No. 91104-1 is used for removing individual contacts from connector housings and for detaching
contacts from mating posts.
Wire Harnessing
Fixed
Clamp
If necessary, wires can be
Extraction Tool
Part No. 91104-1
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
Unrestricted
Wire for
Free-Floating
Instruction Sheet
408-7678
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
Contacts
Cable
Tie
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing. For
more information, request
Insulating and Bundling
Products Catalog 124132.
7
.281/.344* [7.14/8.74]
(without housing)
.370/.433* [9.40/11.00]
(with housing)
*Dimension defines .031 x .062 [0.79 x 1.57] portion of post.
If post is longer than maximum specified, post tip may butt against wire ends.
Note: All part numbers are RoHS compliant.
298
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Locking Clip Connector Housings, .031 x .062 [0.79 x 1.57] Centerline
C
Single Row, .156 [3.96]
Centers
A
B
.110
[2.79] Min.
Typ.
Material and Finish
Black thermoplastic, 94V-0 rated
.220
[5.59]
Related Product Data
Contacts used with — page 298
.060
[1.52]
Mate with —
Machine Applied Posts — page 294
Headers — pages 295-297 (see page
.860
[21.84]
298 for recommended post length)
Performance Specifications —
page 305
.031 x .062
[0.79 x 1.57]
Post
.433/.370
[11.00/9.40]
Technical Documents —
page 305
(Ref only)
.194
[4.93]
.110
[2.79]
Typ.
.156
[3.96]
Typ.
Dimensions
Housing Part Nos.
No. of
Pos.
1
Keyed Positions
on Mating Face
A
—
—
B
—
—
C
UnKeyed
87270-1
87270-2
1-87270-3
—
Keyed
—
.200 [5.08]
.376 [9.55]
.532 [13.51]
—
2
3
—
—
.156 [3.96] .156 [3.96]
—
—
IIII
3 of 4
4
87270-3
.156 [3.96] .312 [7.92]
.688 [17.48]
.844 [21.44]
87270-4
—
—
—
IIIII
4 of 5
5
1-87270-0
.312 [7.92] .312 [7.92]
1-87270-4
—
—
—
IIIIII
5 of 6
6
1-87270-2
.312 [7.92] .468 [11.89] 1.000 [25.40]
.468 [11.89] .468 [11.89] 1.156 [29.36]
7
87270-5
—
—
—
IIIIIII
6 of 7
7
1-87270-1
1-87270-5
87270-6
1-87270-6
87270-7
1-87270-7
87270-8
—
—
—
—
—
—
—
—
—
—
—
—
8
.468 [11.89] .624 [15.85] 1.312 [33.32]
.624 [15.85] .624 [15.85] 1.468 [37.29]
.624 [15.85] .780 [19.81] 1.624 [41.25]
.780 [19.81] .780 [19.81] 1.780 [45.21]
.780 [19.81] .936 [23.77] 1.936 [49.17]
9
10
11
12
IIndicates "closed cavity". No post entry hole in this position.
Notes: 1. All housings listed above will accept Locking Clip Contacts No. 87269 and 87278, refer to page 298
Note: All part numbers are RoHS
2. Refer to TE Instruction Sheet 408-7676 for proper contact orientation within the housings.
compliant.
299
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Application Tooling
Interchangeable applicators
For more information, request
Instruction Sheet 408-8040.
For Crimp Snap-In
Receptacles and Locking
Clip Contacts
Side-Feed Heavy-Duty
Miniature Applicators
(Coded HDM)
for crimping products reeled
side-by-side on single or
dual carrier strips (primarily
closed-barrel terminals and
open-barrel contacts).
Similar design as the end-
feed version. All side-feed
applicators include a wire
stop to help correctly
position the wire end in the
crimping target area.
Semiautomatic bench
machines for crimping
reeled terminals and
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
Specifications
Width — 18.7-25.3 [475-643]
depending on applicator type
Depth — 21.5-28.1 [546-713]
depending on applicator type
Height — 20 [508]
Weight — 240 lb [110 kg]
Electrical — 120 or 220 VAC, 50
or 60 Hz; 310 VA
Air — 90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m /s] when
contacts, featuring a quiet
and reliable direct motor
drive, microprocessor
controls for ease of setup
and operation, and guarding
and lighting designed for
operator convenience and
safety. All models are
equipped with either manual
or automatic precision
adjustment of crimp height.
Machine-mounted sensors
are available for crimp
quality monitoring using
conventional miniature-style
applicators.
3
required with air-feed applicators
Wire Range — 26-10 AWG
2
[0.12-6 mm ] solid or stranded,
depending on product applied
For more information, request
Catalog 65828, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Fully-automatic machines
that measure, cut, strip and
terminate single leads.
Microprocessor-controlled,
and programmed and
operated using an easy-to-
follow, menu-driven
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2, 1213400-1, -2
Specifications
Width — 159 [4 040]
Depth — 68 [1 730]
Height — 86 [2 185] with
24 [610] dia. reel
Weight — 2 000 lb [907 kg]
touchscreen. Features
include direct-drive
terminating units with
precision crimp height
adjustment, fully
programmable setups, wire
runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
quality monitoring is also
available.
Electrical — 220 VAC, 50 or
60 Hz, single phase, 25 A, with
neutral and ground
Air — 90 psi [6.21 bar], 15 scfm
3
[0.0071 m /s] sustained
Wire Range — 26-10 AWG
2
[0.12-6 mm ] stranded, 26-16 AWG
7
2
[0.12-1.4 mm ] solid
Lead Lengths — 3-90
[76.2-2 285], 90-1 000
[2 285-25 400] with long lead
conveyors
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
Note: All part numbers are RoHS
compliant.
Note: For additional tooling options, contact TE or reference the TE web site.
300
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling (Continued)
Semiautomatic bench
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
AMP-O-MATIC Stripper-
Crimper Machines,
854040-3, -4
Specifications
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or
60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar],
3.5 scfm [0.00165 m /s]
crimping machines that also
strip the wire, and are
therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and
an efficient scrap removal
system. All adjustments can
be made from the front of
the machines without
3
Wire Range—32-14 AWG
2
[0.03-2 mm ]
For more information, request
special tools. Available with
crimp quality monitoring.
Catalog 65004, Video 198075,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Interchangeable applicators
for crimping products in
AMP-O-MATIC Stripper-
Crimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
For more information, request
Catalog 65004 (AMP-O-MATIC
Stripper-Crimper Machines),
Catalog 82275 [Crimp Quality
Monitor (CQM)].
Stripper-Crimper
Applicators (coded SCA)
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
The Kappa 235 has the
capability of processing
wires with a cross section of
up to 4 AWG and an outside
diameter of 0.59 inch.
Options include an inner
conductor processing kit for
multiconductor cables and
a flat ribbon cable kit.
Kappa 235, Automatic Cut
and Strip, 3-547178-1
Specifications
Width—25 [630]
Depth—16 [490]
Height—13.4 [370]
Weight—95 lb [44 kg]
Wire Cross-Sections—
24-4 AWG [0.22-25 mm ]
Flat Ribbon Cables—width up
to 40mm
2
Length Range—0.04”-328ft
[1mm - 99.99m] (+/- 0.2%)
Electrical—110/230 V -
50/60Hz, switches automatically
The Cosmic 927R
Thus optimal stripping
quality is guaranteed and
damage to the conductor is
eliminated.
Cosmic 927R
Micro-Cable Stripper
Micro-Cable Stripper was
developed to reliably strip
various insulation materials
and micro-cable. From
7
conductor diameter 36 AWG
to 10 AWG, the stripping
diameter display can be set
to within 0.1mm increments.
Note: All part numbers are RoHS
compliant.
Note: For additional tooling options, contact TE or reference the TE web site.
301
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling (Continued)
Premium grade hand tools.
All CERTI-CRIMP head
assemblies / dies, have
multiple power options
available. The
accompanying diagram
outlines those power
options. See catalogs
1654714 (SDE Electric
Terminator), 124208 (626
Pneumatic Tool System) and
1773381(Battery-Powered
Crimp Tool Kits) for more
information.
For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
CERTI-CRIMP Straight
Action Hand Tools (SAHT)
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a
contact locator and wire
stop, plus an insulation
crimp adjustment lever,
when applicable.
Approximate weight 1.3 lb
[0.59 kg]
For more information, request
Catalog 65780.
Commercial grade hand
tool for crimping various
products. Features ratchet
control to provide complete
crimp cycle. Accepts both
pinned- and shouldered-
style die sets. Locators are
provided with pinned-style
die sets for proper contact
and wire positioning, and
to help minimize contact
rotation and bending during
crimping. Approximate
All PRO-CRIMPER head
assemblies / dies, have
multiple power options
available. The
accompanying diagram
outlines those power
options. See catalogs
1654714 (SDE Electric
Terminator), 124208 (626
Pneumatic Tool System) and
1773381(Battery-Powered
Crimp Tool Kits) for more
information.
PRO-CRIMPER III
Hand Tool
weight 1.3 lb [0.60 kg].
Instruction Sheet
408-9930
7
Note: For additional tooling options, contact TE or reference the TE web site.
302
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling (Continued)
Bench machines for insert-
For Board Mount
Receptacles and Machine
Applied Posts
Modular Insertion System
(MIS) Bench Machines,
217600 Series,
Specifications
ing a variety of products
into pc boards. Uses the
same interchangeable
Width — 18 [457]
Depth — 24 [610]
Height — 18 [457]
Weight — 250 lb [113 kg]
Electrical — 120 to 220 VAC,
50 or 60 Hz (217600); 120 or
240 VAC, 60 Hz, single phase,
120 VA (662820)
Air — 80 psi [5.52 bar] min.,
15 scfm [0.00708 m /s] min.
Insertable Area — 18 x 22
[457 x 559] max.
662820 Series (shown)
insertion heads as the
Comp-U-Sertor II Machines.
Series 217600 machines
feature a manually-operated
X-Y positioning fixture, plus
a locator spotlight. The
machine cycles when the
board hole is placed on the
anvil and both triggers on
the dual handles attached
to the X-Y fixture are
3
For more information, request
Catalog 296059.
depressed. Series 662820
machines, without board
fixturing, cycle automatically
when the hole is properly
located. A stabilizing disk
over the anvil helps keep
the board level.
For Board Mount Receptacles
This benchtop insertion
machine installs contacts
into PC boards at rates to
2000 per hour. A spotlight
highlights the insertion area,
and lower tooling assures
precise board location.
The machine is activated
by a foot pedal.
Automatic machine for
P300 Automatic Insertion
Machine
Specifications
inserting a variety of con-
tacts into pc boards (PCBs).
Equipped with an insertion
tool (comprised of a prod-
uct-specific insertion head,
an anvil, and a product feed
mechanism). Stepper-motor
driven X-Y table positions
PCBs under insertion head.
Surface Mount Equipment
Manufacturers Association
(SMEMA) compatible inline
PCB Insertion Station for
posts, tabs, receptacles or
sockets. Stand-alone unit is
field upgradeable to Pass
Through. Mounts up to four
TE pneumatic insertion
Width — 57.5 [1 460]
Depth — 64.5 [1 640]
Height — 60 [1 520]
Weight — Depending on
configuration
Electrical — 110 V, 60 Hz
Air — 87 psi [6 bar]
Insertable Area — 24 x 16
[600 x 400]
For more information, contact TE.
7
heads. Modem diagnostics
standard, vision system
optional. Control panel used
to program and monitor
entire insertion process.
Note: All part numbers are RoHS
compliant.
Note: For additional tooling options, contact TE or reference the TE web site.
303
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Application Tooling (Continued)
A servo powered XY table
For Board Mount
P350 Pin Insertion Machine
Specifications
positions the PCB under a
central drive station at high
speed. The tool changer
can hold up to 3 insertion
heads each capable of
applying a different product.
A unique rotary insertion
finger allows the application
of products at up to 7
Receptacles and Machine
Applied Posts (Continued)
Width — 102 [2600]
Depth — 118 [3000]
Height — 87 [2200]
Weight — approx 3500 lb
[1600 kg]
Electrical — 230 V, 50-60 Hz,
10 A
Air — 600 kPa dried air
different angles without
rotating the PCB. This
Max. Board Size — 17.5 x 17.5
[450 x 450]
allows the P350 to apply
product at different angles
without a reduction in
insertion rate or the
The P350 is a fully
potential positioning error
associated with PCB
automatic inline pin
insertion machine capable
of applying reeled pins,
tabs, receptacles and
similar products into PCBs.
With inline operation, an
automatic tool changer and
insertion rates up to 5 per
second, it is focused at fully
automatic high speed
operation to maximize
throughput while minimizing
costly scrap.
rotation. Icon driven
software with touch screen
provides a simple to use,
intuitive operator interface.
The P350 provides a wide
range of solutions for pin
insertion applications.
Quick change tooling
packs, and a wide range of
options make it a flexible
high speed platform.
7
304
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Performance Specifications
The electrical, mechanical
and environmental charac-
teristics of the AMPMODU
.031 x .062 [0.79 x 1.57]
Interconnection System are
listed below:
Mechanical Characteristics
Contact Durability
Receptacles
Locking
Clip
Plating
Standard
Pressure
75 Cycles
75 Cycles
N/A
High
Contacts
Pressure
.000016 [0.00041] Min. Tin
.000079 [0.00201] Min. Tin
.000100 [0.00254] Min. Tin
.000015 [0.00038] Gold
.000030 [0.00076] Gold
25 Cycles
25 Cycles
N/A
N/A
N/A
25 Cycles
25 Cycles
N/A
75 Cycles
200 Cycles
50 Cycles
100 Cycles
Connector Durability
Receptacles
Electrical Characteristics
Contact Current Rating —
5 amperes max. for single contact in free
air, could vary due to ambient tempera-
ture, wire size and duty cycles.
Contact Resistance —
12 milliohms at 100 ma and 50 mv open
circuit.
Dielectric Rating —
At Sea Level – 1200 VAC between con-
tacts on .156 [3.96] centers for 1 minute.
Mating
– 16 oz. [4.45N] max. per contact after 3 mating cycles
(standard pressure)
–30 oz. [8.34N] max. per contact after 3 mating cycles
(high pressure, gold)
–60 oz. [16.68N] max. per contact after 3 mating cycles (high pressure, tin)
Unmating – 1 oz. [0.28N] min. per contact after 3 mating cycles (standard pressure)
3 oz. [0.83N] min. per contact after 3 mating cycles (high pressure)
Locking Clip Contacts
Mating
– 4 lb. [17.79N] max. per contact after 3 mating cycles
Insulation Resistance — 5 x 103
megohms (initial)
Unmating – 2 lb. [8.90N] min. per contact after 3 mating cycles
Environmental Characteristics
Operating Temperature — -65°C to 105°C [-85°F to 221°F] (Gold Plated)
-65°C to 60°C [-85°F to 140°F] (Tin Plated)
Technical Documents
Various technical docu-
ments are available for your
use:
Application Specifications
describe requirements for
using the product in its
intended application and/or
crimping information.
They are intended for the
Packaging and Design
Engineer and the Machine
Setup Person.
Instruction Sheets provide
instructions for assembling
or applying the product.
They are intended for the
Manufacturing Assembler or
Operator.
Product Specifications
describe technical perform-
ance characteristics and
verification tests. They are
intended for the Design,
Component and Quality
Engineer.
408-7308 Clinching Procedures for
Header Assemblies
408-7411 Suggestions for Wave
Soldering AMPMODU
Receptacles
408-7594 TE Hand Tool 90274-2 for
Crimping Crimp Snap-In
18-22 AWG Contacts
408-7750 TE Hand Tool 90328-1 for
Crimping Crimp Snap-In
114-25000 Crimp Snap-In Receptacle
Contacts
108-25016 Interconnection System,
114-25004 Board Mount Receptacle
Standard Pressure
Contacts
108-25025 Interconnection System,
114-25008 Locking Clip Contacts
High Pressure, Gold
114-25011 Machine Applied Straight
108-25025-1 Interconnection System,
Posts
High Pressure, Tin
Contacts (22-26 AWG)
108-36029 Locking Clip Connectors
408-7676 AMPMODU Locking Clip
Connectors and Contacts
408-7671 TE Hand Tool 90308-1 for
Crimping Locking Clip
Contacts
7
408-7678 TE Extraction Tool 91104-1
for Locking Clip Contacts
408-7981 Clinching Procedures for
Receptacle Assemblies
408-9451 TE Extraction Tool
843473-1 for Crimp
Snap-In Receptacles
Note: All part numbers are RoHS compliant.
305
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Shunts
Product Facts
I 7600 Series Programmable
Shunts use conventional
.100 x .300 [2.54x7.62] DIP
leg spacing
I Post Shunts are used to
common pairs of .025 [0.64]
square posts, .025 [0.64]
diameter round posts and
.022 x .026 [0.56 x 0.66]
formed posts
TE offers a variety of high
quality shunts for low cost
manual programming. TE
7600 Series Programmable
Shunts are designed on
the standard .100 x .300
[2.54 x 7.62] DIP spacing.
TE Post Shunts mate with
All TE shunts feature one-
piece construction for high
reliability. All have high
normal forces for excellent
electrical continuity. For
added reliability, Tandem
Spring and Dual Beam
any common pairs of
square, rectangular and
round posts. Post shunts
come
in two-position low profile,
2 mm miniature, tandem
spring, dual beam, and
multiposition versions.
Shunts have two points of
contact in each receptacle.
TE DIP Shunts are a highly
reliable, low cost means of
manually programming
various types of
electrical/electronic
equipment. The shunt
consists of a series of
Among the options
available are choices of
gold or tin plating, beryllium
copper or phosphor bronze
contact material and shunts
conductive straps packaged with 94V-0 rated housing
in a DIP configuration. The spaces on .079 [2.00],
straps can be retained intact .100 [2.54] and .200 [5.08]
for a closed circuit or broken
with a hand tool to produce
an open circuit.
centers with the low profile
series requiring only .250
[6.35] clearance from the
pc board.
8
306
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
Specifications subject
to change.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
AMPMODU Interconnection System
Dual In-Line Package (DIP) Shunts — 7600 Series
Standard Shunt
Standard Pressure
Material and Finish
Housing — Glass-filled polyester, UL
94V-0 rated
.290
[7.37]
Contacts — Brass
Finish — Selectively plated .000100
min. tin on solder area over .000050
min. nickel on entire contact
Contact Lead Spacing —
.100 x .300 [2.54x7.62]
15° Max.
Typ.
.079
[2.01]
Lead Length — .140 [3.56] below
mounting surface
Housing Color — Black
Programming Tool — See below
Programming Hand Tool
Part No. 435862-1
.005
0.13
.005
0.13
]
.100
[2.54
.035
[0.89
Typ.
Dia. Typ.
]
.005
0.13
.300
[7.62
]
This tool provides a reliable means of
programming DIP shunts. It is rugged,
light-weight and dependable. No special
skills are required to use this tool.
Dimension A
No. of
Standard Shunt
Pos.
Standard Pressure
inch
.400
.600
.700
.800
.900
1.000
1.200
mm
4
6
10.16
15.24
17.78
20.32
22.86
25.40
30.48
1825190-4
1825190-6
1825190-7
1825190-8
1825190-9
1-1825190-0
1-1825190-2
7
8
9
10
12
8
Note: All part numbers are RoHS compliant.
307
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
specified. Values in brackets
are metric equivalents.
te.com
AMPMODU Interconnection System
Post Shunts
Product Facts
2-Position, Low Profile Shunts
I One-piece contact
construction
Economy Shunt
.100 [2.54] Centerline
I High normal forces
I 94V-0 rated housings
I Gold inlay, gold plate or tin
plate over nickel
2.498
[63.45]
I Stackable
I Those post shunts indicated
are recognized under the
component program of
Underwriters
Laboratories Inc.,
File No. E28476
R
and certified by the
Canadian Standards
R
Association
Part Numbers
File No. LR 7189
Gold Plate1
.000015
[0.00038]
Gold Flash1
Tin Plate
.000100
Gold Plate
.000030
[0.00076]
Housing
Configuration
Color
.000005
[0.00013]
[0.00254]
Tandem Spring Shunts
I Two points of contact
provide extra reliability
Strip of 10
Strip of 10
Strip of 10
Loose Piece
Blue
Black
Red
382811-2
382811-6
382811-9
1-382811-6
—
382811-8
—
—
382811-5
—
—
2-382811-0
—
—
Black
1-382811-8
—
I Shunts accept posts as
short as .175 [4.45]; posts
bottom at .330 [8.38]
1In contact area
2mm Mini Shunts
I Stackable on 2mm contact
Standard Housing Shunt
.200 [5.08] Centerline
centerline
I Low profile
R
R
I Available in strips of 10
Material and Finish —
Low Profile and 2mm Shunts
3.453
[87.70]
Housing — Glass-filled thermoplastic,
black, UL 94V-0 rated
Contacts — Beryllium copper or
phosphor bronze, plated .000050
[0.00127] nickel underplate with gold
plate in contact area or tin overall
Material and Finish —
Tandem Spring Shunts
Housing — Nylon, UL 94V-0 rated
Contacts — Phosphor Bronze
Finish — .000030 [0.00076] nickel
underplate with gold inlay in the contact
area or tin overall
Part Numbers
Gold Plate1
.000015
[0.00038]
Gold Plate1
Tin Plate
.000100
[0.00254]
Housing
Color
Configuration
.000030
[0.00076]
Strip of 10
Black
531230-2
531230-3
531230-1
1In contact area
8
Note: All part numbers are RoHS compliant.
308
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
specified. Values in brackets
are metric equivalents.
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Post Shunts (Continued)
2-Position,
Low Profile Shunts (Novo)
(Continued)
Handle Shunt
.100 [2.54] Centerline
Loose Piece Part Numbers
Gold Plate1
.000015
[0.00038]
Gold Plate1
Gold Plate1
.000050
Tin Plate
.000100
[0.00254]
Housing
Color
Type
.000030
[0.00076]
[0.00127]
Black
Black
881545-1
880584-1
881545-2
880584-2
881545-3
880584-3
4-881545-2
Open Top
880584-4 Closed Top
1In contact area
2 mm Mini-Shunt
.079 [2.00] Centerline
R
R
Part Numbers
Gold Plate1
Gold Plate1
Housing
Color
Configuration
.000015
.000030
[0.00038]
[0.00076]
Strip of 10
Black
382575-2
382575-3
1In contact area
Dual Beam Shunt
2.500
[63.5]
Ref.
.196
[4.98]
Ref.
.247
[6.27]
Ref.
.096
[2.44]
Part Numbers
Gold Plate1
Gold Plate1
Housing
Configuration
Strip of 10
Type
Color
.000015
.000030
[0.00038]
[0.00076]
8
Black
Blue
390088-2
390088-4
—
390088-1
390088-3
390088-5
Open Top
Open Top
Open Top
Strip of 10
Strip of 10
Yellow
Note: All part numbers are RoHS
compliant.
1In contact area
309
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Post Shunts (Continued)
Tandem Spring Shunt
.100 [2.54] Centerline
R
R
Part Numbers
Gold Inlay1
TinPlate
.000100
[0.00254]
Housing
Color
.000030
[0.00076]
Black
530153-2
4-530153-1
1In contact area
Multiposition Shunts
for.025 [0.64] Square Posts
.300
[7.62]
MAX
A
.200
[5.08]
.200 [5.08] Centerline
R
.150
[3.81]
REF
R
.048
[1.22]
REF
Housing — Glass-filled polyester
Contacts — Beryllium Copper
Finish — .000030 [.00076] gold in
contact area over .000050 [.00127]
nickel on entire contact
.250
[6.35]
MAX
Current Rating — 2.5 amps
.550
[13.97]
Dimension A
Housing
Color
Part
Number
Size
inch
.246
.246
.396
mm
6.25
6.25
10.01
2x2
2x2
2x3
Black
Red
390102-1
390102-3
390102-2
Black
8
Note: All part numbers are RoHS compliant.
310
1307819
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
AMPMODU Interconnection System
Performance Specifications
Dual In-Line Package (DIP) Shunts — 7600 Series
Current Rating —
Standard pressure — 2 amperes for +20˚C rise above ambient (one conductor per shunt
Machine insertable — 1 ampere for +20˚C rise above ambient (one conductor per shunt)
Insulation Resistance — 1x 1010 ohms min. at 100 VDC
Dielectric Withstanding Voltage — 500 VDC min.
Capacitance — 2 picofarads max. between adjacent straps
Temperature Rating — -55˚C to +105˚C
Terminal Strength (Bend Test) — Two 45˚ bend cycles per MIL-STD-202, Method 211, Condition B
Solder Bridging —
Cut straps can be reconnected by solder bridging. Solder bridging recommendations are:
•Use low temperature solder (60/40 tin/lead)
•Use solder tip approximately 1/32 [0.79] in diameter
•Do not let solder tip come in contact with plastic material
Post Shunts
Current Rating —
3 amperes max. unless otherwise noted
Temperature Rating — -65˚C to +105˚C (gold) -40˚C to +85˚C (tin)
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-7533
108-1445
108-1476
108-1674
108-9057
108-9062
108-37006
Dual In-Line Package (DIP) Shunts
2mm Mini Shunt
Economy Shunt, Multiposition Shunt
Dual Beam Shunt
Low Profile Shunt
Tandem Spring Shunt
Novo Shunt with Handle
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1045
114-1054
114-1059
Tandem Spring Shunt
Dual In-Line Package (DIP) Shunts
Economy Shunt, Dual Beam Shunt, Low Profile Shunt, Multiposition
Shunt
2mm Mini Shunt
114-1074
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-7768
408-3208
408-3230
408-3251
408-3276
Dual In-Line Package (DIP) Shunts
Tandem Spring Shunt
Economy Shunt, Dual Beam Shunt, Low Profile Shunt
Multiposition Shunt
2mm Mini Shunt
8
311
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Engineering Notes
8
312
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
19156
57013
57038
57118
57119
57131
57138
57139
57144
57145
57288
57289
57290
85487
85493
85829
85839
85840
85875
85923
85969
86016
86147
86177
86181
86182
86207
86286
Page
139, 140
Part No.
87227
87230
87232
87233
87247
87258
87262
87269
87270
87278
87283
87309
87316
87456
87474
87483
87496
87499
87523
87568
87572
87577
87579
87587
87589
87605
87608
87623
87631
87654
87655
87666
87667
87710
87733
87743
87756
87772
87774
87809
87878
87879
87921
87922
87977
87983
87984
87985
87986
87987
87988
87989
87990
87993
87995
102055
102090
102095
102099
102100
102102
102103
Page
85, 96, 97
85, 98, 99
85, 94, 95, 210, 221
94, 95
295
Part No.
102104
102106
102107
102114
102128
102185
102198
102202
102203
102241
102312
102316
102338
102348
102387
102393
102394
102395
102396
102398
102399
102448
102449
102523
102536
102537
102540
102541
102548
102557
102567
102570
102589
102617
102618
102619
102620
102641
102642
102666
102681
102690
102691
102692
102693
102694
102695
102699
102742
102766
102777
102783
102784
102785
102786
102787
102788
102789
102791
102792
102802
102823
Page
290
58
290
58
211
58
203
58
210, 213
255, 258, 259
139, 140
115, 210
85, 116
210, 215
258, 259
213
58, 59
297
58
295
58
298
58
299
58
298
58
296
58
213
58
286
203
286
210, 216
129
211
286
210, 220
256
295
210
296
133
256
296
210, 214
213
265
296
255, 259
255, 256
265
296
127
213
126
213
124, 125
122, 123
119, 120
117, 118
85, 131
130
256
294
216
265
116
285, 287, 288
294
255, 259
255, 259
255, 259
255, 259
213
296
169, 172, 175-177,
180, 182, 189, 191,
163
210, 218, 219
297
195-197, 214-218, 220,
256, 257
149
297
198
86432
86434
86477
86479
86480
86492
87003
87022
87025
87046
87077
286
286
213
124, 125
193, 200
122, 123
117, 118
119, 120
127
213
286
218
98, 99
286
219
204
213
210, 213
286
286
265
163
286
265
291
213
199
213
163
255, 259
193, 199
199
214-218, 220,
256, 257
85, 177
218
87105
87107
87116
87124
87131
87132
87133
87159
87160
87165
87175
87176
87179
87190
87191
87194
87195
87215
87220
87224
286
211
218, 219
210, 217
287
198
293
257
207
257
209
287
257
209
287
85, 148
177
209
287
293
289
142
295
289
199
207
287
262, 263
262, 263
262, 263
262, 263
262, 263
262, 263
263
208
287
209
287
208, 209
207
289
126
207
292
297
211
213
290
264
96, 97
85, 93
93
290
264
290
200
290
259
313
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Part Number Index (Continued)
Part No.
102826
102871
102898
102903
102917
102918
102920
102935
102972
102973
102976
102977
102985
102987
102988
102991
103056
103058
103080
103136
103137
103138
103139
103140
103141
103152
103153
103157
103158
103164
103165
103166
Page
144
Part No.
103639
103640
103641
103644
103645
103648
103649
103650
103651
103652
103653
103654
103655
103656
103657
103658
103659
103660
103661
103669
103672
103673
103680
103681
103682
103684
103685
103686
103687
103688
103734
103735
103817
103893
103894
103895
103896
103897
103900
103901
103902
103903
103904
103908
103911
103916
103944
103945
103946
103947
103948
103949
103950
103951
103952
103953
103954
103955
103956
103957
103958
103959
Page
245
231
231
231
231
233
233
233
233
233
237
239
239
239
239
237
237
237
237
245
247
247
240
241
242
229
229
229
229
221, 229
231
245
86, 100
237
237
239
239
231
233
233
229
229
247
245
39
Part No.
103960
103961
103968
103969
103970
103971
103972
103973
103974
103975
103976
103977
103978
103979
104068
104069
104071
104074
104076
104078
104118
104178
104186
104192
104196
104257
104271
104272
104317
104319
104361
104362
104363
104438
104439
104450
104477
104479
104480
104481
104482
104483
104500
104503
104505
104506
104549
104550
104583
104584
104652
104655
104656
104666
104693
104744
104804
104809
104891
104892
104893
104894
Page
231
Part No.
104895
104905
104909
104910
104935
111196
146079
146128
146129
146130
146131
146132
146133
146134
146135
146138
146205
146250
146252
146253
146254
146256
146257
146258
146260
146261
146262
146264
146265
146266
146268
146269
146270
146272
146273
146274
146276
146277
146278
146280
146281
146282
146284
146285
146286
146288
146289
146290
146292
146293
146294
146296
146297
146304
146305
146306
146307
146308
146309
146310
146311
146315
Page
19
143
231
208
146
233
245
263
233
245
213
233
247
213
233
56
213
233
163
280
233
109
107
229
109
107
229
110
107
229
110
107
229
86, 109
109
263
229
261, 263
261, 263
264
229
86, 110
110
30
29
178
281
28
202
281
27
104, 107
104, 107
104, 107
104, 107
104, 107
85, 104, 107
104
115
31
261, 263
261, 263
262, 263
262, 263
262, 263
262, 263
261, 263
261, 263
261, 263
261, 263
85, 126
127
40
34
33
32
38
37
104
221, 231
104
261, 263
104
261, 263
104
121
104
128
104
250
85, 104
104
85, 122, 123,
210, 255
245
245
104
103167
103168
124, 125
234
104
85, 117, 118,
210, 255
234
104
221, 248
102, 107
102, 107
102, 107
102, 107
102, 107
85, 102, 107
102
103169
103171
103185
103186
103233
103239
103240
103264
103268
103291
103321
103322
103327
103328
103336
103340
103341
103349
103350
103361
103414
103455
103542
103577
103634
103635
119, 120
213
29
221, 222, 253
107
221, 222, 253
107
221, 222, 253
147
221, 223
224
241
239
254
254
44
107
107
102
193, 201
259
102
102
199
35
102
107
237
237
237
237
237
237
239
239
239
239
239
239
231
231
231
231
102
107
45
102
107
282
282
15
102
107
85, 102
102
85, 146
261, 263
261, 263
281
16
102
16
102
30
85, 103
103
281
16
116
40
85, 103
103
85, 115
213
28
249
22
85, 105
105
85, 147
85, 163
247
21
105
21
105
247
19
202
314
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Part Number Index (Continued)
Part No.
146386
146427
146455
146456
146457
146458
146459
146460
146461
146462
146463
146464
146465
146466
146467
146468
146469
146470
146471
146472
146473
146474
146475
146476
146477
146478
146479
146480
146481
146482
146483
146484
146485
146486
146487
146488
146489
146490
146491
146492
146493
146494
146495
146496
146497
146498
146499
146500
146501
146502
146503
146504
146505
146506
146507
146508
146509
146510
146762
146763
146850
146851
Page
175
85
Part No.
146852
146853
146858
146859
146860
146861
146868
146869
146870
146871
147030
147070
147071
147072
147095
147096
147099
147100
147101
147102
147103
147104
147105
147106
147121
147254
147278
147323
147324
147326
147333
147334
147335
147377
147378
147381
147382
147383
147384
147396
147413
147424
147433
147434
147435
147436
147437
147438
147503
147720
147723
147724
147726
147727
147728
147729
147730
147731
147736
147737
147738
147739
Page
107
107
107
107
107
107
107
107
107
107
235
86, 167
167
167
183, 184
183, 184
182
182
190
190
190
192
86, 192
192
16
Part No.
147740
147741
147742
147743
147744
147745
147746
147747
173144
173145
173146
219054
219055
219137
219138
219253
382575
382811
390088
390102
487544
487545
487547
487576
487923
487937
487938
487940
487941
499991
530153
530554
530901
530902
531226
531230
532955
532956
533009
534204
534206
534237
534245
534257
534258
534267
534972
534974
534975
534978
534998
535541
535542
535584
535585
535598
746383
867052
880584
881545
966926
1375549
Page
192
Part No.
1375582
1375583
1375791
1375792
1375793
1375794
1375795
1375796
1375797
1375798
1375799
1375800
1375801
1375959
1375961
1375963
1375965
1375967
1445251
1445439
1445440
1445441
1470108
1470109
1470209
1470213
1734493
1734506
1734507
1734508
1734516
1734531
1734569
1734606
1734770
1825190
1825851
2041068
2041069
5084476
5084780
5086147
5086182
5102084
5102154
5102156
5102160
5102162
5103308
5103309
5103310
5103311
5104338
5104340
5111595
5146139
5146140
5147721
5147722
5147732
5147733
5147734
Page
252
192
252
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
86, 112
112
112
112
112
112
112
112
112
113
113
113
113
113
113
113
85, 113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
176
175
107
107
187
7, 12
187
7
187
7, 12
190
7
190
6, 12
190
6
155, 156
9
155, 157, 158, 159
9
155, 160, 161
58
8
8
58
12
58
10
58
10
58
10
309
11
308
11
309
12
310
12
50
12
50
12
48
79
54
78
48
80
202
251
251
251
177
86, 165
165
165
44
52
66
52
75
48
81
48
67
205
66
310
84
267
83
269
77
268
82
45
267, 268
308
73
16
307
16
195
139, 140, 210
76
16
193, 195
195
15
84
235
15
195
71
85, 176
85, 175
200
74
176
165
165
165
167
167
167
16
294
294
198
170
201
139, 210, 255
139
85, 182
193, 196
193, 197
195
140
140
135
86, 181
188
187
181
181
188
188
187
187
188
188
86, 188
192
198
135
85, 179, 180
85, 178
86, 183, 184
178
136
136
137
138
179, 180
179, 180
139, 140
207
57
169
170
86, 172
86, 173
172
309
309
72
172
252
173
315
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Part Number Index (Continued)
Part No.
5147735
5176264
5176837
Page
173
70
Part No.
5178751
5530553
5530901
Page
70
Part No.
5531216
5531224
5531225
Page
269
Part No.
5535512
5535676
5535677
Page
85, 170
85, 169
169
269
269
269
68
269
Tooling Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
58062
58074
58075
58336
58338
58342
58395
58540
58641
90273
90274
90295
90308
90328
90381
90431
91047
91084
91085
91104
91112
91169
91170
91171
91200
91295
91410
91419
91516
91517
91518
91531
91533
91541
91551
Page
273
Part No.
104072
217600
224910
265871
265964
308554
312522
318619
354500
354786
356484
356500
380392
466007
466376
466562
466571
466655
466721
466723
466763
466764
466812
466819
466905
466918
466921
466937
466943
466950
466952
466980
466981
466982
466983
Page
Part No.
527116
543518
547178
565967
567239
567296
567297
567298
567307
567310
662820
679167
679996
758030
761420
768338
812665
843473
843477
843996
Page
263
253
23
273
153, 164, 166, 303
48, 60
152
301
273
286
273
254
273
152
222, 253
222, 253
222, 253
211
254
152
273
274
273
48, 60
300
211, 213
60
207
275
303
290
60
62
207
300
207
298
152
162
290
298
275
211
286
62
207
213
263
60
213
290
207
213
253, 254, 265
62
207
214, 215, 216,
217, 218, 219, 220
298
269
62
290
854040
854449
856002
856675
904507
904590
904591
904592
904640
904641
907459
931800
1213400
301
274
274
273
163
163
163
163
166
164
162
273
300
152
290
152
211
152
269
60
213
23
213
263
213
163
290
213
269
211, 213
222, 253
254
298
269
222, 253
222, 253
222, 253
254
207
213
222, 253
316
1307819
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Engineering Notes
317
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Engineering Notes
318
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Engineering Notes
319
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
AMPMODU Interconnection System
Engineering Notes
320
1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
CIS WR 08/2011
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
te.com
FOR MORE INFORMATION
te.com/products/AMPMODUSystem50
te.com/products/AMPMODUMTE
TE Technical Support Center
Internet:
USA:
te.com/help
+1 (800) 522-6752
+1 (905) 475-6222
+52 (0) 55-1106-0800
+54 (0) 11-4733-2200
+49 (0) 6251-133-1999
+44 (0) 800-267666
+33 (0) 1-3420-8686
+31 (0) 73-6246-999
+86 (0) 400-820-6015
Canada:
Mexico
Latin/S. America:
Germany:
UK:
France:
Netherlands:
China:
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
te.com
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
1307819 CIS WR 08/2011
AMP, ACTION PIN, AMP-LATCH, AMP-O-LECTRIC, AMP-O-MATIC, AMPLIMITE, AMPMODU, AMPOMATOR,
CERTI-CRIMP, CHAMPOMATOR, PRO-CRIMPER, R-CAM, TE Connectivity and the TE connectivity (logo)
are trademarks. Teflon is a trademark of E.I. du Pont de Nemours and Company.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current.
TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all
implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice.
Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
相关型号:
©2020 ICPDF网 联系我们和版权申明