350792-1 [MACOM]
2-Piece Power Connectors; 两件式电源连接器型号: | 350792-1 |
厂家: | Tyco Electronics |
描述: | 2-Piece Power Connectors |
文件: | 总6页 (文件大小:1380K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Quick Reference Guide
2-Piece Power Connectors
THINGS TO CONSIDER WHEN CHOOSING POWER CONNECTORS
Application. Does the application require a board-to-board, wire-to-board, wire-to-wire, bus bar, card edge
or a combination of these types of connectors?
Current and Voltage. Does the connector require power only, or a combination of power and signal?
How much current is required in the application? Keep in mind that power connector performance is
typically measured in amperes (or amps). The voltage is also very important as it defines the spacing
between the contacts.
Hot-Pluggability. Will the application be mated while under electrical load? If so, a hot-pluggable connector
is required. Many of the products in this guide have been approved for use in hot-plug applications.
TYPICAL POWER CONNECTOR APPLICATIONS
• AC to DC and DC to DC
• Power Supplies
• High End Computers
• Servers
• High Density Power Distribution
• Uninterruptible Power Supplies (UPS)
• Removable Battery Packs
• Board Stacking
• Data Storage Equipment
• Telecommunications Switches
• Power Distribution
te.com/powerconnectors
TE Connectivity
2-Piece Power Connectors
Application: Hot Swappable Power Supplies (500w–5KW)
CHARACTERISTICS
Connector
MULTI-BEAM XLE
FLATPAQ
MINIPAK HDL
Current Rating
Vented Housings
Up to 75 A*
32 Amps*
Up to 40 Amps*
l
l
Licensed —
Second source
l
l
Height (mm)
12 mm
14 mm
8 mm - 9 mm
Modular
l
l
l
Active Guides
Customizable
l
l
* Single contact current rating
te.com/products/multibeamxle
te.com/products/minipakhdl
MULTI-BEAM XLE Connector
FLATPAQ Connectors
MINIPAK HDL Connector
• New 6 beam power contact offers up to
75 A current rating and delivers more
than 200 Amps/linear inch
• 32 Amp high-performance
CROWN BAND power contacts
• High-density, low profile, power/signal,
blind-mate connector
• True hot-plug power contacts available
• Developed to meet next generation
1U application by reducing airflow
impedance
• New 25A low power contact occupies
50% less pcb space than MULTI-BEAM XL
power contacts
• Versatile modular design allows low
volume customized configurations to
meet your specific application
requirements
• Hot-pluggable power supplies
• New slim guide sockets reduce the
overall PCB footprint
• Contacts rated up to 40 amps and
deliver more than 150 amps per
linear inch
• Solder and compliant press-fit
termination options available
• Vented housing allows for better heat
dissipation
• Rugged design features active guide pins
Reference Part Numbers*
2-1926732-5
2-1926733-5
• Hot-plug capable
Reference Part Numbers*
6646597-1
6646722-1
Reference Part Numbers*
6450830-2
1926845-6
6450850-2
Rechargeable Batteries (for portable/hand-held electronic devices)
RECHARGEABLE BATTERIES
Part Number
1827684-1
1827654-1
1-1123688-7
6123978-1
120591-1
Pitch (mm)
No. of Positions
Mount
Style
Receptacle
Plug
2
2
7
7
10
4
1
/
Vertical Surface Mount
Right Angle Thru-Hole
Vertical Surface Mount
Right Angle Thru-Hole
Horizontal Thru-Hole
Vertical Solder
2.5
2.5
/
Receptacle
Plug
Coin Cell
Battery Interconnects
5787430-1
5787441-1
5
Right Hand Plug
Keyless Plug
5
/
Right Angle Solder
• Current capacity — 7 Amps/single
contact at 30° T-Rise
• Choice of right angle or vertical mount
headers with left, right or keyless
polarization
• 5 mm pitch headers available for 7.2, 10.8
and 12.0 volts rechargeable batteries
*Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers.
te.com/powerconnectors
TE Connectivity
2-Piece Power Connectors
Application: Backplanes
PRODUCTS
Amps/Linear Inch
Universal Power Module
MULTIGIG RT
ICCON
MINIPAK HDE
Stacked ICCON
< 125
l
125 – 175
175 – 225
> 225
l
l
l
l
te.com/products/upm
te.com/products/iccon
Universal Power Module (UPM)
Connectors (Slim UPM shown)
MULTIGIG RT Connectors
• 2 mm backplane connectors
ICCON Connectors
• With and without locking feature
• Varieties of UPM include: standard,
high current, slim, low profile
• 2 performance levels
• Standard 10 amp contact
• High current 16 Amp contacts
• True hot-plug contacts
• High reliability — up to 250 cycles
• Different configurations include right
angle, vertical, coplanar and mezzanine
• 20 Amp contacts
• Three contact mating lengths are
available in 1.5 mm sequence levels
• 1 and 2 row versions to provide maximum
trace routing flexibility
• True hot-plug contacts
Reference Part Numbers*
1-1410271-1 (Plug)
1410270-2 (Receptacle)
• 35A current rating
• Slimline version available, 30% smaller
footprint
• Board-to-board, board–to-busbar, and
wire-to-board application options
• Durable, quick connect/disconnect
function for high current space
constrained applications
Reference Part Numbers*
6643274-1 (Vertical Pin),
6643228-1 (R/A Pin),
Reference Part Numbers*
1903977-1 (Slim UPM), 1645498-2
(Vertical Plug), 5646954-2 (R/A Plug)
6643220-1 (SLIMLINE Socket)
te.com/products/minipakhde
te.com/products/iccon
MINIPAK HDE Connectors
Stacked ICCON Connector
• Designed to compliment other backplane
connectors offered by TE including
Z-PACK HM-Zd, Z-PACK TinMan and
other connectors
• Very High Current Density — Up to
200 Amps per inch
• Occupies less PCB edge space than
separate ICCON power and guide
modules
• Right angle connector to mate
motherboard-to-daughterboard
power distribution systems
• Ground pin, power pin and
mate-first-break-last pin options
• Very high current density — 18 Amps
per contact, over 250 Amps/linear inch
• Two levels of contact sequencing for
mate-first-break-last operation
• Designed to compliment Z-PACK and Reference Part Numbers*
other backplane connectors
2085181-1 (R/A Socket)
1766663-1 (Vertical Pin)
Reference Part Numbers*
1926226-1 (2x6), 1926229-1 (2x9)
*Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers.
te.com/powerconnectors
TE Connectivity
2-Piece Power Connectors
Application: Cable Power
CABLE POWER
Products
Wire Size
26-8 AWG
14-10 AWG
12-0 AWG
Current Rating
Specialty
Low, high power options in
same connector
MULTI-BEAM XLE
ET POWER
up to 50 Amps
up to 35 Amps
50-250 Amps
Low profile
BusBar Quick Connect/
Disconnect
RAPID LOCK
High Current Universal
MATE-N-LOK
Panel mount or
30-10 AWG
up to 35 Amps
free hanging versions
Single & 2 pole
AMP Power Series
Wave Crimp
300MCM-0 AWG
Flat Cable
15-275 Amps
40-110 Amps
Quick Connect/Disconnect
Flat
te.com/products/multibeamxle
te.com/products/wavecrimp
te.com/products/amppowerseries
MULTI-BEAM XLE Cable Receptacles
AMPOWER Wave Crimp System
AMP Power Series Connectors
• X, Y, Z float mount, blind-mate
connectors for drawer type applications
• Allows more angular misalignment than
the original MULTI-BEAM XL connector
• Modular design to meet any
application
• Hot-Pluggable
• Flat cable, dissipates heat better than
round wire
• Termination of flat cable requires
no stripping. Provides a reliable low
resistance, gas tight interface
• Single pole and 2-pole connector
housings, crimp snap-in contacts, and
accessories
• Rugged contact design
• Open barrel contacts 6-20AWG on
reels for automatic and semiautomatic
machine termination
• Lower operating temperature than
standard round/discrete wires
• Easily formed into shape, without
cable ties
• Lower cost than laminated bus bars
• Compatible with industry alternate
standard versions
• Panel Mount, Slide-to-Lock and
Squeeze-to-Release configurations are
available
te.com/products/universalmatenlok
te.com/products/rapidlock
te.com/products/etpower
High Current Universal MATE-N-LOK II
Connectors
• Available in 2-15 circuit sizes for free
hanging, panel mount, or wire-to-board
connection
• Louvertac band and screw machined
contacts provide very high current with
low contact resistance
RAPID LOCK Bus Bar Connectors
ET Power Connector
• Locking feature retains each contact to
mating pin
• Up to 35Amps per contact
• End-to-end stackability
• No installation tools required
• Low profile, less than 8 mm above PCB
• Cable-to-PCB applications
• Positive latch retention
• Fast, reliable replacement for power
lugs
• Up to 250 Amps per contact; very low
contact resistance
• No extraction tools required/economical
• Pin and sockets can be intermixed in
• Right angle and vertical mounts
the same housing
te.com/powerconnectors
TE Connectivity
2-Piece Power Connectors
Industry Standards
PRODUCTS
Standards
Z1 Power Connector
MINIPAK HD
Guide Hardware
MULTI-BEAM XLE
Advanced TCA
PICMG MicroTCA.0
VITA 41
1766500-1
1-1469373-1
1469920-1
1410465-1
1410956-1
VITA 46
VITA 62
6450843-6
Note: Part numbers listed in the above table are some available samples for each standard. There are other part numbers and configurations to choose from.
AdvancedTCA
MicroTCA
VITA 41
VITA 46
VITA 62
The PICMG 3.0
The PICMG
Referred to as VXS-
VME Switched Serial in
the next generation of
VME backplanes and
introduces features like
improved bandwidth,
backward compatibility
and increased power
delivery into the existing
VMEbus technology.
Based on VMEbus
The latest in VITA
AdvancedTCA standard
defines architecture
for modular computing
components within
communications network
infrastructure. The
standardization focuses
on providing superior
power and cooling
capabilities in solutions
that are cost effective,
highly available and
highly scalable.
MicroTCA.0 standard is
complimentary to the
AdvancedTCA standard,
but is optimized for
smaller scale and
more price sensitive
applications.
technology, the standard Standards, VITA 62 is
is defined for 3U and 6U
formats and merges the
latest in connector and
packaging technology
currently being defined
and will use the standard
VPX 3V16U form factor and
comply to requirements
with the latest in bus and defined in VITA. 48.0. VITA
serial fabric technology.
62 will define the power
generation requirements
for a module that can be
used to power systems
that support a VITA 62 slot
on the VPX backplane.
te.com/products/guidehardware
te.com/products/multibeamxle
te.com/products/atcapower
Guide Hardware
MULTI-BEAM XLE Connector
Z1 Power Connector
• Guide modules are available for the
AdvancedTCA, VITA 41.0 VXS and the
VITA 46.0 VPX standards
• Most guide modules are keyed to
prevent misalignment during board-
to-board mating
• ATCA guide modules are available
for a variety of applications including
front board, mid plane, backplane and
rear transition modules as specified in
the AdvancedTCA specification
• VITA 62 standard developed around
MULTI-BEAM XLE connector
• Designed to PICMG 3.0 AdvancedTCA
standard
• New 6 beam power contacts offer
a 50A current rating and lower
mating force
• New 20A low power contact
occupies 50% less PCB space than
MULTI-BEAM XL power contacts
• Combines 8 high conductivity size 16
pin & socket contacts with 22 size 22
pin & socket contacts
• Capable of carrying 20 Amps per
contact and the signals are capable
of carrying 2 Amps per contact
• Vented housing allows for better heat
dissipation
• MULTIGIG RT guide modules meet
the VITA 46.0 VPX and VITA 41 VXS
standards
MINIPAK HD Connectors
• Designed to the MicroTCA.0 standard
• 30 microinches gold plating over
nickel
• Hot-plug contact design controls arc
during hot-mate/un-mate cycles
• Available to carry up to 14.5 Amps
per contact fully loaded
te.com/products/minipakhd
For more information on TE Industry
Standard Products visit:
te.com/products/atca
AdvancedTCA, MicroTCA and PICMG are trademarks of
PICMG-PCI Industrial Computer Manufacturers Group, Inc.
VITA, VMEbus, VPX, and VXS are trademarks of VITA.
te.com/powerconnectors
Application Diagram
Integrated Backplane Power Systems
• Universal Power Modules (UPM)
• MINIPAK HDE Connectors
• MULTIGIG RT Power Modules
• Guide Hardware
• Z1 Power (AdvancedTCA)
Connectors
Bus Bar-to-Board
• ICCON Connectors
Laptops/Portables
• Battery Interconnects
• RAPID LOCK Connectors
Power — Board-to-Board
Power — Cable-to-Cable/Board
• Universal MATE-N-LOK Product
• AMPOWER Wave Crimp System
• ET Power Connector
• MULTI-BEAM XLE Connectors
• FLATPAQ Modular Connectors
• MINIPAK HDL Connectors
• MINIPAK HD (MicroTCA)
Connectors
• MULTI-BEAM XLE Cable Receptacles
• RAPID LOCK Connectors
FOR MORE INFORMATION
TE Technical Support Center
Visit Us On the WEB!
For your power connector needs go to:
te.com/products/powerconnectors
Check out our selection of videos on YouTube!
USA:
+1 (800) 522-6752
Canada:
Mexico
Latin/S. America:
Germany:
UK:
France:
Netherlands:
China:
+1 (905) 475-6222
+52 (0) 55-1106-0800
+54 (0) 11-4733-2200
+49 (0) 6251-133-1999
+44 (0) 800-267666
+33 (0) 1-3420-8686
+31 (0) 73-6246-999
+86 (0) 400-820-6015
Refer to our catalog:
Power Connectors & Interconnection Systems
Catalog # 1773096
Sample Kits!
Sample kits are available for various Power Connectors.
Contact your local TE Sales Representative for more
information or visit www.te.com
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
Most products in this brochure have been
qualified by UL and/or CSA.
te.com
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
4-1773458-1 CIS LUG FP 1M 02/2012
AMP, AMPOWER, CROWN BAND, FLATPAQ, ICCON, MATE-N-LOK, MINIPAK HDE, MINIPAK HDL,
MULTI-BEAM XL, MULTI-BEAM XLE, MULTIGIG RT, RAPID LOCK, Z-PACK, Z-PACK TINMAN, TE Connectivity,
TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and/or company names might be
trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current.
TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all
implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice.
Specificationsare subject tochangewithout notice. Consult TE for the latest dimensions and design specifications.
相关型号:
3508-0000PR
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
3508-0000S
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
3508-0000SC
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
3508-0100PR
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
3508-0100S
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
3508-0100SC
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
©2020 ICPDF网 联系我们和版权申明