5-103976-1 [MACOM]
Wire-to-Board, .100 [2.54] Centerline Products; 线对板, .100 [ 2.54 ]间距产品型号: | 5-103976-1 |
厂家: | Tyco Electronics |
描述: | Wire-to-Board, .100 [2.54] Centerline Products |
文件: | 总32页 (文件大小:1378K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AMPMODU Interconnection System
Wire-to-Board, .100 [2.54] Centerline Products
Wire Sizes
Wire Size
Product Family
AWG
20
[mm2]
0.5-0.6
0.3-0.05
0.03
Locking Clip, Mod. IV, IV.v, V, MT, Short Point
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Mod. IV, IV.v, V, Short Point
22-30
32
Contact Platings
Platings
Product Family
.000015 [0.00038]
Mod. IV, IV.v, V, MTE, MT, Short Point
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Gold
.000030 [0.00076]
Gold
.000050 [0.00127]
Locking Clip, Mod. IV, IV.v, V, MT
Gold
Tin
Locking Clip, Mod. IV, IV.v, V, MTE, MT, Short Point
Mating Post Lengths
Post Lengths
Product Family
Mod. IV (.600 [15.24] Profile Height)
Mod. IV.v (.600 [15.24] Profile Height)
Mod. V (.600 [15.24] Profile Height)
Mod. IV (.645 [16.38] Profile Height)
Mod. IV.v (.645 [16.38] Profile Height)
Mod. V (.645 [16.38] Profile Height)
MT Assembly with Standard Pressure Contacts
MT Assembly with High Pressure Contacts
MTE Assembly
.210-.283 [5.33-7.19]
.205-.283 [5.21-7.19]
.185-.283 [4.70-7.19]
.256-.323 [6.50-8.20]
.251-.323 [6.38-8.20]
.231-.323 [5.87-8.20]
.222-.273 [5.64-6.93]
.200-.273 [5.08-6.93]
.200-.250 [5.08-6.35]
.169-.259 [4.29-6.58]
.273-.350 [6.93-8.89]
.200-.277 [5.08-7.04]
Short Point Connector Assembly
Locking Clip (Connector Assembly)
Locking Clip (Single Contact)
5
Application Tooling
Product Family
Application Tooling
Description
Mod. IV,
IV.v,V
Locking
Clip
Short
Point
MT
MTE
Level V
Manual Hand Tools (Wire Crimp)
Manual Hand Tools (IDC)
•
•
•
•
•
•
•
AMP-O-MATIC Stripper/Crimper
Machines with Applicator
•
•
•
CHAMPOMATOR
Model 2.5 Machine
CHAMPOMATOR
Model 3A Machine
AMP-O-LECTRIC
Machines with Applicator
Pneumatic Hand Tools
IDC Electric Power Unit
Tube-Fed Ribbon
Cable Machine
•
•
•
•
•
•
•
•
•
•
•
•
•
•
AMPOMATOR CLS Machines
Discrete Wire Machine
Manual Arbor Tool
•
•
•
•
•
•
•
•
•
Pneumatic Arbor Tool
88
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
Board-to-Board Solutions Guide, .100 [2.54] Centerline Products
Single-Row
Vertical Headers
and Receptacles
(Page Ref.)
Single-Row
Right-Angle Headers,
Horizontal Receptacles
(Page Ref.)
Double-Row
Vertical Headers
and Receptacles
(Page Ref.)
Double-Row
Right-Angle Headers,
Horizontal Receptacles
(Page Ref.)
Problem or Concern
Tyco Electronics'
Potential Solution
HEADERS Retention Feature:
Unshrouded
Shrouded
Headers Float Off Board
Soldering Operation
102
—
103
—
198
104, 199
199
105, 200
Header Contacts Damaged
During Manufacturing
Operation or In-Field Use
Shrouded HEADERS:
Standard Profile
115
116
117-121
122-128
Press-Fit ACTION PIN POST
HEADERS:
Unshrouded
146
—
—
—
147
148, 149, 199
—
—
Shrouded
Machine Applied
Posts
163, 164
Board/Backplane Requires
High Temperature Surface-
Mount Compatibility
Surface-Mount Compatible Thru-Hole:
HEADERS:
Unshrouded
Shrouded
(Low Profile)
RECEPTACLES
102*
—
103*
—
104*
105*
138*
130,*137*
—
—
196*
195*
Surface-Mount:
HEADERS
RECEPTACLES
109*
187, 188
—
172
110
189-192
—
173
Application Requires Board
Guidance, Polarization and/or
Blind-Mate Capability
Two-Piece Family: w/Guide Posts:
HEADERS
RECEPTACLES
—
—
—
—
198, 199
196*
200
195*
Mod IV Low Profile
RECEPTACLES:
TOP ENTRY:
Thru-Hole
Surface-Mount
BOTTOM ENTRY:
Thru-Hole
Reduction in Parallel
Board-to-Board Stack Height
Necessary (Refer to Parallel
Stack Guide on Page 62.)
178
—
—
—
179, 180*
—
—
—
177
—
—
—
—
—
—
—
Surface-Mount
DUAL ENTRY
Thru-Hole
181
187, 188
—
—
182-184
189-192
—
—
Surface Mount
Soldering Problems with
Thru-Hole Bottom Entry
Receptacles (Must Mask
Post Holes in Board During
Soldering Operation)
RECEPTACLES:
Bottom Entry
Outrigger
181
—
182
—
(Separate Holes for
Receptacle Leads
and Mating Leads)
End-to-End Stackable:
HEADERS (Unshrouded):
Thru-Hole
Application Requires
93, 102
102*
94, 95, 103*
96, 97, 104*
104*
98. 99. 105
108*
Connectors to be End-to-End
Stackable on .100 [2.54] Grid
Thru-Hole*
103*
—
Surface-Mount
109*
110*
—
RECEPTACLES:
Thru-Hole
175, 177, 178, 181
188
169*
172
176, 179, 180*, 182*, 183, 184
191, 192
170
173
Surface Mount
*High temperature compatible version, refer to page ref. listed.
Wire-to-Board Solutions Guide, .100 [2.54] Centerline Products
5
Customer Requirement
Tyco Electronics' Potential Solution
Mod IV Polarized Housing
Catalog Page(s)
220
MTE Latched Receptacle and Header
MT with Polarizing Covers
230, 231, 244-250
256-258
Application Requires
Guidance, Polarization
Short Point Polarized Housing
224
Wire-to-Wire Application
Wire-to-Wire Application (Latched)
Wire-to-Wire Application (Through Panel)
High Vibration and Shock Applications
Printed Circuit Board Polarization
Mod IV Receptacle Contacts and Pins
MTE Latched Receptacle and Shrouded Pin Assembly
MTE Panel Mount
211-213
230, 231, 236, 237
242
Locking Clip Contacts and Housings
MTE Header with PC Board Orientation Peg
MTE Surface Mount Headers
207-209
248, 249
251, 252
249, 250
Board Requires Surface Mount Capability
MTE High Temperature Compatible Headers
Need to mate to
AMP-LATCH Eject Headers
Mod IV Ejection Housing
220
MT with Eject Covers
Mod IV Housing with Strain Relief
256-259
218, 219
Need to Minimize Strain to Cable
Application Requires
207, 298
244-250
Locking Clip Contacts
Self-Retaining Contacts
Header Secured to Board
During/Prior to Soldering
MTE Headers with Post Retention or Holddowns
Mod IV plain Housing with Mod V Contacts
MTE with High Pressure Contacts
213, 214, 216
234, 235
Mate to Unshrouded Header
with Retention Requirements
Multiple Cables to be
240, 241
229, 256, 257, 259
222
MTE Coupling Shroud, Double- or Single-Row
MT with Hermaphroditic Covers
Short Point Contacts
Common to One Header
Right-Angle Cable Dress
Application Requires Crimp
Contacts and MTE Housings
Housings and End-to-End and
Side-to-Side Stackable
Connector Must Mate to
Post Lengths of .169 [4.29] Min.
Short Point Double-Row Housing,
MTE Plain Housing
223, 228, 229
222
Short Point Contacts
89
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Interconnection System
Product Facts
■
Receptacle assemblies mate
with .025 [0.64] sq. posts;
mating post length is .200
[5.08] min., .250 [6.35] max.
■
Proven AMPMODU receptacle
contact design; dual
cantilever beams, built-in
anti-overstress, completely
enclosed “box” design,
standard or high-pressure
■
■
Insulation displacement
technology
Two contact sizes for
terminating 30-22 AWG [0.05-
0.3 mm2] wire range; .054
[1.37] max. insulation diam-
eter with an insulation wall
thickness of .015 [0.38] max.
■
■
Choice of gold duplex or tin
plated contacts
Interchangeable crimp
snap-in pin and receptacle
contacts available
■
■
■
Housing sizes 2 through
25 positions, single-row .100
[2.54] centers
Plain housings are end-to-end
and/or back-to-back stackable
for open pin field applications
Optional header with
“swaged tail” feature helps
prevent movement prior to
flow soldering
The AMPMODU MTE
Interconnection System
offers both wire-to-board
and wire-to-wire connectors
using .025 [0.64] sq. post
technology.
contact, available in either
Performance
standard or high-pressure,
features dual cantilever
beams in an enclosed
Specifications
5
■
■
Integral latch provides
positive retention between
header and receptacle
housing
Electrical Characteristics
Contact Current Rating —
3 amperes for single contact in free air
(Amperage could vary due to ambient
temperature, wire size and duty cycles.)
Contact Termination
Resistance — 15 milliohms (max.)
Dielectric Withstanding Voltage —
At Sea Level–600 VAC, rms
At 70,000 Ft. [21 336 m]–225 VAC, rms
“box.” The post stop helps
prevent a mating post from
disturbing the wire
termination and also limits
the mating depth of a long
post to protect a wrap-type
termination at the base of
the post. The forward
contact stop helps prevent
contact overinsertion prior
to termination. All contacts
are furnished on carrier
strips which are interlocked
for stability and positive
location during termination.
The AMPMODU MTE
Interconnection System
consists of single-row
housings with contacts
preloaded on .100 [2.54]
centers. Housings are
furnished with contacts
partially inserted, leaving
the termination areas
exposed. Final contact
insertion can be
accomplished automatically
with Tyco Electronics
application equipment, and
manually when terminated
with the Tyco Electronics
pistol grip hand tool.
Coupling shrouds permit
ganging of smaller connectors
with guide ribs to form larger
single- or double-row
latching connectors
■
Mass terminating tooling
provides lowest applied cost
for most production needs
Insulation Resistance —
5,000 megohms (min.)
■
■
SMT and SMT compatible,
high-temp headers available
Environmental Characteristics
Operating Temperature —
-65°C to +105°C
Vibration — 15 G’s (gold), 10 G’s (tin)
Physical Shock — 50 G’s
Industrial Mixed Flow Gasing —
Class 1 (20 days) (gold)
Recognized under the
Component Program of
Underwriters
Single-row housings are
available in sizes 2 through
25 positions. Included are
three styles of receptacle
housings—plain, polarized/
latching and ribbed and two
styles of pin housings,
Laboratories Inc.,
File No. E28476
R
■
Certified by Canadian
Standards
Association,
File No. LR7189
The heart of the system is
the insulation displacement
contact design, featured in
both pin and receptacle
contacts. The receptacle
Product Specification
108-25034
Application Specification
114-25026
R
shrouded with polarizing/
latching feature and ribbed.
225
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Interconnection System (Continued)
Wire-to-Board
High-Temp Headers,
Polarized/Latching, Straight
and Right Angle Post,
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Receptacle Assemblies
Polarized/Latching
(See pages 230 & 231)
with or without Holddown
(See pages 249 & 250)2
Double-Row Coupling
Shroud (See page 241)
Receptacle
Assemblies,
Polarized/Latching (See
pages 230 & 231)
AMPMODU Shrouded
Headers,
Polarized/Latching,
Headers, Double-Row,
Straight or Right Angle
Post1 (See pages
119-121, 124, 125, 127,
128, 131-133 & 149)
Straight Post, with or
without Swaged Tail
(See pages 244 & 245)2
Headers,
Polarized/Latching,
Right Angle Post, with
or without Holddown
(See pages 246 & 247)
Receptacle Assemblies Plain
(See pages 228 and 229)
High Pressure Receptacle Assemblies,
Plain (See page 234)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
AMPMODU Breakaway Headers,
Single- or Double-Row, Straight
or Right–Angle Post, with or
without Board Retention Feature
(See pages 102-105)
Receptacle Contact,
Insulation Displacement
(Used in all
Single-Row Coupling
Shroud (See page 240)
Receptacle Assemblies)
5
1Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last
1post to inside of end shroud wall.
2Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252)
226
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Interconnection System (Continued)
Wire-to-Wire
Pin Assemblies, Shrouded
Polarized/Latching
(See pages 236 & 237)
Receptacle Assemblies,
Polarized/Latching
(See pages 230 & 231)
Receptacle Contact,
Insulation Displacement
(Used in all
Pin Contact,
Insulation
Displacement
(Used in all Pin
Assemblies)
Receptacle Assemblies)
Pin Assemblies
with Guide Ribs (See
pages 238 & 239)
Panel Mount
Pin Shroud
(See page 242)
Receptacle Assemblies
with Guide Ribs
(See pages 232 & 233)
Single-Row
Coupling
Shroud (See
page 240)
Crimp Snap-In
Receptacle Contact
(Used with Unloaded
Housings—
Crimp Snap-In Pin
Contact (Used with
Unloaded Housings—
See page 254)
See page 253)
Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable.
5
227
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
.600
[15.24]
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
B
Typ.
Housing — Black thermoplastic,
94V-0 rated
A
Contacts — Phosphor Bronze,
plated as follows:
Position No. 1 Indicator
(Farside)
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.100
[2.54]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.098
[2.49]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110 (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Single-Row Shrouded Headers
with .066 [1.68] End Dimension —
pages 115, 116
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
—
These receptacle assemblies
with plain housings can be
stacked end-to-end and/or side-
to-side for single or double-row
connections to an open pin field
with a .100 [2.54] centerline grid.
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
228
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form Plain,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Dimensions
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
2.000 [50.80]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
8
5
4
4
2
2
2
2
2
2
5-103979-1
5-103979-2
5-103979-3
5-103979-4
5-103979-5
5-103979-6
5-103979-7
5-103979-8
5-103979-9
6-103979-0
6-103979-1
5-103978-1
5-103978-2
5-103978-3
5-103978-4
5-103978-5
5-103978-6
5-103978-7
5-103978-8
5-103978-9
6-103978-0
6-103978-1
5-103977-1
5-103977-2
5-103977-3
5-103977-4
5-103977-5
5-103977-6
5-103977-7
5-103977-8
5-103977-9
6-103977-0
6-103977-1
5-103976-1
5-103976-2
5-103976-3
5-103976-4
5-103976-5
5-103976-6
5-103976-7
5-103976-8
5-103976-9
6-103976-0
6-103976-1
5-103975-1
5-103975-2
5-103975-3
5-103975-4
5-103975-5
5-103975-6
5-103975-7
5-103975-8
5-103975-9
6-103975-0
6-103975-1
5-103974-1
5-103974-2
5-103974-3
5-103974-4
5-103974-5
5-103974-6
5-103974-7
5-103974-8
5-103974-9
6-103974-0
6-103974-1
103688-1
103688-2
103688-3
103688-4
103688-5
103688-6
103688-7
103688-8
103688-9
1-103688-0
1-103688-1
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
10 2.000 [50.80] .998 [23.35]
11 2.200 [55.88] 1.098 [27.89]
12 2.400 [60.96] 1.198 [30.43]
MTE Receptacle Assemblies—Individual Form Plain,
Single-Row, .100 [2.54] Centerline
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Dimensions
B
Unloaded
Housings
Plating A
6-103903-2
6-103903-3
6-103903-4
6-103903-5
6-103903-6
6-103903-7
6-103903-8
6-103903-9
7-103903-0
7-103903-1
7-103903-2
7-103903-3
7-103903-4
Plating B
6-103684-2
6-103684-3
6-103684-4
6-103684-5
6-103684-6
6-103684-7
6-103684-8
6-103684-9
7-103684-0
7-103684-1
7-103684-2
7-103684-3
7-103684-4
Plating C
6-103685-2
6-103685-3
6-103685-4
6-103685-5
6-103685-6
6-103685-7
6-103685-8
6-103685-9
7-103685-0
7-103685-1
7-103685-2
7-103685-3
7-103685-4
Plating A
Plating B
6-103686-2
6-103686-3
6-103686-4
6-103686-5
6-103686-6
6-103686-7
6-103686-8
6-103686-9
7-103686-0
7-103686-1
7-103686-2
7-103686-3
7-103686-4
Plating C
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
6-103902-2
6-103902-3
6-103902-4
6-103902-5
6-103902-6
6-103902-7
6-103902-8
6-103902-9
7-103902-0
7-103902-1
7-103902-2
7-103902-3
7-103902-4
6-103687-2
6-103687-3
6-103687-4
6-103687-5
6-103687-6
6-103687-7
6-103687-8
6-103687-9
7-103687-0
7-103687-1
7-103687-2
7-103687-3
7-103687-4
1-103688-2
1-103688-3
1-103688-4
1-103688-5
1-103688-6
1-103688-7
1-103688-8
1-103688-9
2-103688-0
2-103688-1
2-103688-2
2-103688-3
2-103688-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
229
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions 2 thru
12. For ease of handling, positions
2 thru 5 are recommended when
using the Tyco Electronics Manual
Pistol Grip Tool.
1.120
[28.45]
.600
[15.24]
Material and Finish
Housing — Black thermoplastic,
B
Typ.
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
A
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Position No. 1 Indicator
(Farside)
.100
[2.54]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.098
[2.49]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
Related Product Data
Mateable AMPMODU Products
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide
Ribs (installed in Panel Mount
Pin Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Interchangeable Crimp Contacts
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
230
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Dimensions
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
2.000 [50.80]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
8
5
4
4
2
2
2
2
2
2
5-103961-1
5-103961-2
5-103961-3
5-103961-4
5-103961-5
5-103961-6
5-103961-7
5-103961-8
5-103961-9
6-103961-0
6-103961-1
5-103960-1
5-103960-2
5-103960-3
5-103960-4
5-103960-5
5-103960-6
5-103960-7
5-103960-8
5-103960-9
6-103960-0
6-103960-1
5-103959-1
5-103959-2
5-103959-3
5-103959-4
5-103959-5
5-103959-6
5-103959-7
5-103959-8
5-103959-9
6-103959-0
6-103959-1
5-103958-1
5-103958-2
5-103958-3
5-103958-4
5-103958-5
5-103958-6
5-103958-7
5-103958-8
5-103958-9
6-103958-0
6-103958-1
5-103957-1
5-103957-2
5-103957-3
5-103957-4
5-103957-5
5-103957-6
5-103957-7
5-103957-8
5-103957-9
6-103957-0
6-103957-1
5-103956-1
5-103956-2
5-103956-3
5-103956-4
5-103956-5
5-103956-6
5-103956-7
5-103956-8
5-103956-9
6-103956-0
6-103956-1
104257-1
104257-2
104257-3
104257-4
104257-5
104257-6
104257-7
104257-8
104257-9
1-104257-0
1-104257-1
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
10 2.000 [50.80] .998 [23.35]
11 2.200 [55.88] 1.098 [27.89]
12 2.400 [60.96] 1.198 [30.43]
MTE Receptacle Assemblies—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Dimensions
B
Unloaded
Housings
Plating A
6-103897-2
6-103897-3
6-103897-4
6-103897-5
6-103897-6
6-103897-7
6-103897-8
6-103897-9
7-103897-0
7-103897-1
7-103897-2
7-103897-3
7-103897-4
Plating B
6-103640-2
6-103640-3
6-103640-4
6-103640-5
6-103640-6
6-103640-7
6-103640-8
6-103640-9
7-103640-0
7-103640-1
7-103640-2
7-103640-3
7-103640-4
Plating C
6-103641-2
6-103641-3
6-103641-4
6-103641-5
6-103641-6
6-103641-7
6-103641-8
6-103641-9
7-103641-0
7-103641-1
7-103641-2
7-103641-3
7-103641-4
Plating A
6-103734-2
6-103734-3
6-103734-4
6-103734-5
6-103734-6
6-103734-7
6-103734-8
6-103734-9
7-103734-0
7-103734-1
7-103734-2
7-103734-3
7-103734-4
Plating B
6-103644-2
6-103644-3
6-103644-4
6-103644-5
6-103644-6
6-103644-7
6-103644-8
6-103644-9
7-103644-0
7-103644-1
7-103644-2
7-103644-3
7-103644-4
Plating C
6-103645-2
6-103645-3
6-103645-4
6-103645-5
6-103645-6
6-103645-7
6-103645-8
6-103645-9
7-103645-0
7-103645-1
7-103645-2
7-103645-3
7-103645-4
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
1-104257-2
1-104257-3
1-104257-4
1-104257-5
1-104257-6
1-104257-7
1-104257-8
1-104257-9
2-104257-0
2-104257-1
2-104257-2
2-104257-3
2-104257-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into
housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
231
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recommended
when using the Tyco Electronics
Manual Pistol Grip Tool.
1.120
[28.45]
.600
[15.24]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze,
plated as follows:
B
Typ.
A
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Position No. 1 Indicator
(Farside)
.100
[2.54]
Typ
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
.098
[2.49]
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
Mating post length for preloaded housings
is .200 [5.08] min., .250 [6.35] max.
5
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Interchangeable Crimp Contacts—
(Short Point) — page 253
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
pages 277, 278
—
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
Product Specification
108-25034
Application Specification
114-25026
232
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Receptacle Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Strip Form Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
Dimensions
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
2.000 [50.80]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
8
5
4
4
2
2
2
2
2
2
5-103973-1
5-103973-2
5-103973-3
5-103973-4
5-103973-5
5-103973-6
5-103973-7
5-103973-8
5-103973-9
6-103973-0
6-103973-1
5-103972-1
5-103972-2
5-103972-3
5-103972-4
5-103972-5
5-103972-6
5-103972-7
5-103972-8
5-103972-9
6-103972-0
6-103972-1
5-103971-1
5-103971-2
5-103971-3
5-103971-4
5-103971-5
5-103971-6
5-103971-7
5-103971-8
5-103971-9
6-103971-0
6-103971-1
5-103970-1
5-103970-2
5-103970-3
5-103970-4
5-103970-5
5-103970-6
5-103970-7
5-103970-8
5-103970-9
6-103970-0
6-103970-1
5-103969-1
5-103969-2
5-103969-3
5-103969-4
5-103969-5
5-103969-6
5-103969-7
5-103969-8
5-103969-9
6-103969-0
6-103969-1
5-103968-1
5-103968-2
5-103968-3
5-103968-4
5-103968-5
5-103968-6
5-103968-7
5-103968-8
5-103968-9
6-103968-0
6-103968-1
103648-1
103648-2
103648-3
103648-4
103648-5
103648-6
103648-7
103648-8
103648-9
1-103648-0
1-103648-1
1.990 [50.55] .398 [10.11]
1.990 [50.55] .498 [12.65]
2.390 [60.71] .598 [15.19]
1.400 [35.56] .698 [17.73]
1.600 [40.64] .798 [20.27]
1.800 [45.72] .898 [22.81]
10 2.000 [50.80] .998 [23.35]
11 2.200 [55.88] 1.098 [27.89]
12 2.400 [60.96] 1.198 [30.43]
MTE Receptacle Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
Individual Receptacle Assembly
30-26 AWG [0.05-0.15mm2] Wire
Individual Receptacle Assembly
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Dimensions
B
Unloaded
Housings
Plating A
6-103901-2
6-103901-3
6-103901-4
6-103901-5
6-103901-6
6-103901-7
6-103901-8
6-103901-9
7-103901-0
7-103901-1
7-103901-2
7-103901-3
7-103901-4
Plating B
6-103649-2
6-103649-3
6-103649-4
6-103649-5
6-103649-6
6-103649-7
6-103649-8
6-103649-9
7-103649-0
7-103649-1
7-103649-2
7-103649-3
7-103649-4
Plating C
6-103650-2
6-103650-3
6-103650-4
6-103650-5
6-103650-6
6-103650-7
6-103650-8
6-103650-9
7-103650-0
7-103650-1
7-103650-2
7-103650-3
7-103650-4
Plating A
6-103900-2
6-103900-3
6-103900-4
6-103900-5
6-103900-6
6-103900-7
6-103900-8
6-103900-9
7-103900-0
7-103900-1
7-103900-2
7-103900-3
7-103900-4
Plating B
6-103651-2
6-103651-3
6-103651-4
6-103651-5
6-103651-6
6-103651-7
6-103651-8
6-103651-9
7-103651-0
7-103651-1
7-103651-2
7-103651-3
7-103651-4
Plating C
6-103652-2
6-103652-3
6-103652-4
6-103652-5
6-103652-6
6-103652-7
6-103652-8
6-103652-9
7-103652-0
7-103652-1
7-103652-2
7-103652-3
7-103652-4
13
14
15
16
17
18
19
20
21
22
23
24
25
1.298 [32.96]
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
1-103648-2
1-103648-3
1-103648-4
1-103648-5
1-103648-6
1-103648-7
1-103648-8
1-103648-9
2-103648-0
2-103648-1
2-103648-2
2-103648-3
2-103648-4
5
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully
inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics
pistol grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove receptacle contacts.
3. Keying plugs are available, see page 253.
Note: All part numbers are RoHS compliant.
233
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE High Pressure Receptacle Assemblies—Plain,
Single-Row, .100 [2.54] Centerline
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
.600
[15.24]
Tyco Electronics Manual Pistol
Grip Tool.
Material and Finish
B
Typ.
Housing — Black thermoplastic,
94V-0 rated
A
Contacts — Phosphor Bronze, duplex
plated .000030 [0.00076] gold on
contact area, .000050 [0.00127] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Position No. 1 Indicator
(Farside)
.100
[2.54]
Typ.
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an
insulation wall thickness of .015 [0.38]
max. Mating post length for preloaded
housings is .200 [5.08] min., .250 [6.35]
max.
.098
[2.49]
Related Product Data
Mateable AMPMODU Products
Breakaway Headers — pages 102-
110, (with .230 mating length)
Reeled Breakaway Headers —
pages 106, 107 (with .230 mating
length)
Machine Applied Bandolier
Posts — page 163
Application Tooling — page 273
Performance Specifications —
page 225
5
Strip Form
Strip Form
Receptacle
Housings
Receptacle
Dimensions
No. of
Pos.
Quantities Per
Strip Segment
Assembly
30-26 AWG
Assembly
A
B
26-22 AWG
[.05-.15mm2] Wire
[.12-.30mm2] Wire
2
3
1.980 [50.29]
1.490 [37.85]
1.990 [50.55]
1.990 [50.55]
2.390 [60.71]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
5
5
4
4
2
2
2
2
2
2
5-104438-1
5-104438-2
5-104438-3
5-104438-4
5-104438-5
5-104438-6
5-104438-7
5-104438-8
5-104438-9
6-104438-0
6-104438-1
5-104439-1
5-104439-2
5-104439-3
5-104439-4
5-104439-5
5-104439-6
5-104439-7
5-104439-8
5-104439-9
6-104439-0
6-104439-1
4
.398 [10.11]
.498 [12.65]
.598 [15.19]
.698 [17.73]
.798 [20.27]
.898 [22.81]
.998 [23.35]
1.098 [27.89]
1.198 [30.43]
Technical Documents
pages 277, 278)
—
5
6
Product Specification
108-25034
Application Specification
114-25026
7
8
9
10
11
12
Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched
into “preload” windows. Contacts are fully inserted into housings automatically when terminated with
Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip
hand tool.
2. High pressure receptacle contacts can be made available in other housing styles and position sizes.
Contact your Tyco Electronics sales representative.
Note: All part numbers are RoHS compliant.
234
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE High Pressure Receptacle Assemblies – Guide Ribs
Receptacle Contacts
(See Note 1)
.520
[13.21]
1.120
[28.45]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
.600
[15.24]
Tyco Electronics Manual Pistol
Grip Tool.
B
Typ.
Material and Finish
A
Housing — Thermoplastic, black,
94V-0 rated
Position No. 1 Indicator
(Farside)
Contacts — Phosphor Bronze,
duplex plated .000030 [0.00076] gold
on contact area, .000050 [0.00127] min.
tin on crimp area, with entire contact
underplated .000050 [0.00127] nickel.
.100
[2.54]
Typ
Related Product Data
Coupling Shrouds used with —
Single-Row — page 240
Double-Row — page 241
.098
[2.49]
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Single-Row Coupling
Shrouds) —
Pin Assemblies (Polarized/
Latching) — pages 236, 237
Pin Assemblies with Guide Ribs
(installed in Panel Mount Pin
Shroud) — pages 238, 239, 242
Headers (Polarized/Latching) —
pages 244-252
Mateable AMPMODU Products
(with Receptacle Assemblies
Installed in Double-Row Coupling
Shrouds) —
Headers, Shrouded, Double-Row
(.318 [8.08] mating post length,
.150 [3.81] end dimension) —
pages 119-121, 124, 125, 128, 129,
131-133
5
Strip Form
Strip Form
Receptacle
Housings
Receptacle
Assembly
30-26 AWG
Dimensions
No. of
Pos.
Quantities Per
Strip Segment
Assembly
A
B
26-22 AWG
[.05-.15mm2] Wire
5-147396-1
5-147396-2
5-147396-3
5-147396-4
5-147396-5
5-147396-6
5-147396-7
5-147396-8
5-147396-9
6-147396-0
6-147396-1
[.12-.30mm2] Wire
2
3
1.980 [50.29]
1.490 [37.85]
1.990 [50.55]
1.990 [50.55]
2.390 [60.71]
1.400 [35.56]
1.600 [40.64]
1.800 [45.72]
2.000 [50.80]
2.200 [55.88]
2.400 [60.96]
.198 [5.03]
.298 [7.57]
10
5
5
4
4
2
2
2
2
2
2
5-147030-3
5-147030-4
5-147030-1
5-147030-2
5-147030-5
5-147030-6
5-147030-7
5-147030-8
5-147030-9
6-147030-0
6-147030-1
4
.398 [10.11]
.498 [12.65]
.598 [15.19]
.698 [17.73]
.798 [20.27]
.898 [22.81]
.998 [23.35]
1.098 [27.89]
1.198 [30.43]
Application Tooling — page 273
Performance Specifications —
page 225
5
6
7
8
Technical Documents
pages 277, 278
—
9
10
11
12
Product Specification
108-25034
Application Specification
114-25026
Note: All part numbers are RoHS compliant.
235
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Pin Assemblies, Shrouded—Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Pin Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
1.470
[37.34]
.950
[24.13]
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Contacts — Phosphor Bronze, plated
as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
B
Typ.
Position No. 1
Indicator
A
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.260
[6.60]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
.100
[2.54]
Typ.
.200
[5.08]
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
5
Related Product Data
Mateable AMPMODU Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
236
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
www.tycoelectronics.com
C. America: 52-55-1106-0803
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Pin Assemblies, Shrouded—Strip Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Pin Assembly
Strip Form Pin Assembly
Dimensions
30-26 AWG [0.05-0.15mm2] Wire
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
2.360 [59.94]
.295 [7.49]
8
5
4
4
2
3
2
2
2
2
2
5-103949-1
5-103949-2
5-103949-3
5-103949-4
5-103949-5
5-103949-6
5-103949-7
5-103949-8
5-103949-9
6-103949-0
6-103949-1
5-103948-1
5-103948-2
5-103948-3
5-103948-4
5-103948-5
5-103948-6
5-103948-7
5-103948-8
5-103948-9
6-103948-0
6-103948-1
5-103947-1
5-103947-2
5-103947-3
5-103947-4
5-103947-5
5-103947-6
5-103947-7
5-103947-8
5-103947-9
6-103947-0
6-103947-1
5-103946-1
5-103946-2
5-103946-3
5-103946-4
5-103946-5
5-103946-6
5-103946-7
5-103946-8
5-103946-9
6-103946-0
6-103946-1
5-103945-1
5-103945-2
5-103945-3
5-103945-4
5-103945-5
5-103945-6
5-103945-7
5-103945-8
5-103945-9
6-103945-0
6-103945-1
5-103944-1
5-103944-2
5-103944-3
5-103944-4
5-103944-5
5-103944-6
5-103944-7
5-103944-8
5-103944-9
6-103944-0
6-103944-1
103653-1
103653-2
103653-3
103653-4
103653-5
103653-6
103653-7
103653-8
103653-9
1-103653-0
1-103653-1
1.980 [50.29] .395 [10.03]
1.980 [50.29] .495 [12.57]
2.380 [60.45] .595 [15.11]
1.390 [35.31] .695 [17.65]
2.390 [60.71] .795 [20.19]
1.790 [45.47] .895 [22.73]
1.990 [50.57] .995 [25.27]
10 2.190 [55.63] 1.095 [27.81]
11 2.390 [60.71] 1.195 [30.35]
12 2.590 [65.79] 1.295 [32.89]
MTE Pin Assemblies, Shrouded—Individual Form Polarized/Latching,
Single-Row, .100 [2.54] Centerline
Individual Pin Assembly
Individual Pin Assembly
No. of
Pos.
Dimensions
B
Unloaded
Housings
30-26 AWG [0.05-0.15mm2] Wire
26-22 AWG [0.12-0.3mm2] Wire
Plating A
6-103894-2
6-103894-3
6-103894-4
6-103894-5
6-103894-6
6-103894-7
6-103894-8
6-103894-9
7-103894-0
7-103894-1
7-103894-2
7-103894-3
7-103894-4
Plating B
6-103658-2
6-103658-3
6-103658-4
6-103658-5
6-103658-6
6-103658-7
6-103658-8
6-103658-9
7-103658-0
7-103658-1
7-103658-2
7-103658-3
7-103658-4
Plating C
6-103659-2
6-103659-3
6-103659-4
6-103659-5
6-103659-6
6-103659-7
6-103659-8
6-103659-9
7-103659-0
7-103659-1
7-103659-2
7-103659-3
7-103659-4
Plating A
Plating B
6-103660-2
6-103660-3
6-103660-4
6-103660-5
6-103660-6
6-103660-7
6-103660-8
6-103660-9
7-103660-0
7-103660-1
7-103660-2
7-103660-3
7-103660-4
Plating C
13
14
15
16
17
18
19
20
21
22
23
24
25
1.395 [35.43]
1.495 [37.97]
1.595 [40.51]
1.695 [43.05]
1.795 [45.59]
1.895 [48.13]
1.995 [50.67]
2.095 [53.21]
2.195 [55.75]
2.295 [58.29]
2.395 [60.83]
2.495 [63.37]
2.595 [65.91]
6-103893-2
6-103893-3
6-103893-4
6-103893-5
6-103893-6
6-103893-7
6-103893-8
6-103893-9
7-103893-0
7-103893-1
7-103893-2
7-103893-3
7-103893-4
6-103661-2
6-103661-3
6-103661-4
6-103661-5
6-103661-6
6-103661-7
6-103661-8
6-103661-9
7-103661-0
7-103661-1
7-103661-2
7-103661-3
7-103661-4
1-103653-2
1-103653-3
1-103653-4
1-103653-5
1-103653-6
1-103653-7
1-103653-8
1-103653-9
2-103653-0
2-103653-1
2-103653-2
2-103653-3
2-103653-4
5
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol
grip hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Note: All part numbers are RoHS compliant.
237
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Pin Assemblies—Guide Ribs,
Single-Row, .100 [2.54] Centerline
Pin Contacts
(See Note 1)
.520
[13.21]
Preassembled housings in strip
form are available in positions
2 thru 12. For ease of handling,
positions 2 thru 5 are recom-
mended when using the
Tyco Electronics Manual Pistol
Grip Tool.
1.120
[28.45]
.600
[15.24]
Material and Finish
B
Typ.
Position No. 1 Indicator
(Farside)
Housing — Black thermoplastic,
94V-0 rated
A
Contacts — Phosphor Bronze,
plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.100
[2.54]
Typ.
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000050
[0.00127] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
.098
[2.49]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
Note: Insulation displacement contacts
accept an insulation diameter of .030 [0.76]
min. to .054 [1.37] max. with an insula-
tion wall thickness of .015 [0.38] max.
5
Related Product Data
Mateable AMPMODU MTE Products
(with Pin Assembly Installed in
Panel Mount Pin Shroud) —
pages 242, 243
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single Row
Coupling Shroud) — pages 232, 233,
235, 240
Interchangeable Crimp Contacts —
page 254
Application Tooling — page 273
Performance Specifications —
page 225
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
238
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
www.tycoelectronics.com
AMPMODU Interconnection System
MTE Pin Assemblies—Strip Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline (Continued)
Housing
Quantities
Per Strip
Segment
Strip Form Pin Assembly
Strip Form Pin Assembly
Dimensions
30-26 AWG [0.05-0.15mm2] Wire
26-22 AWG [0.12-0.3mm2] Wire
No. of
Pos.
Unloaded
Housings
A
B
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
2
3
4
5
6
7
8
9
1.980 [50.29] 0.198 [5.03]
1.490 [37.85] 0.298 [7.57]
1.990 [50.55] 0.398 [10.11]
1.990 [50.55] 0.498 [12.65]
2.390 [60.71] 0.598 [15.19]
1.400 [35.56] 0.698 [17.73]
1.600 [40.64] 0.798 [20.27]
1.800 [45.72] 0.898 [22.81]
10
5
5
4
4
2
2
2
2
2
2
5-103955-1
5-103955-2
5-103955-3
5-103955-4
5-103955-5
5-103955-6
5-103955-7
5-103955-8
5-103955-9
6-103955-0
6-103955-1
5-103954-1
5-103954-2
5-103954-3
5-103954-4
5-103954-5
5-103954-6
5-103954-7
5-103954-8
5-103954-9
6-103954-0
6-103954-1
5-103953-1
5-103953-2
5-103953-3
5-103953-4
5-103953-5
5-103953-6
5-103953-7
5-103953-8
5-103953-9
6-103953-0
6-103953-1
5-103952-1
5-103952-2
5-103952-3
5-103952-4
5-103952-5
5-103952-6
5-103952-7
5-103952-8
5-103952-9
6-103952-0
6-103952-1
5-103951-1
5-103951-2
5-103951-3
5-103951-4
5-103951-5
5-103951-6
5-103951-7
5-103951-8
5-103951-9
6-103951-0
6-103951-1
5-103950-1
5-103950-2
5-103950-3
5-103950-4
5-103950-5
5-103950-6
5-103950-7
5-103950-8
5-103950-9
6-103950-0
6-103950-1
104503-1
104503-2
104503-3
104503-4
104503-5
104503-6
104503-7
104503-8
104503-9
1-104503-0
1-104503-1
10 2.000 [50.80] 0.998 [25.35]
11 2.200 [55.88] 1.098 [27.89]
12 2.400 [60.96] 1.198 [30.43]
MTE Pin Assemblies—Individual Form with Guide Ribs,
Single-Row, .100 [2.54] Centerline
Individual Pin Assembly
Individual Pin Assembly
No. of
Pos.
Dimensions
B
Unloaded
Housings
30-26 AWG [0.05-0.15mm2] Wire
26-22 AWG [0.12-0.3mm2] Wire
Plating A
6-103896-2
6-103896-3
6-103896-4
6-103896-5
6-103896-6
6-103896-7
6-103896-8
6-103896-9
7-103896-0
7-103896-1
7-103896-2
7-103896-3
7-103896-4
Plating B
6-103657-2
6-103657-3
6-103657-4
6-103657-5
6-103657-6
6-103657-7
6-103657-8
6-103657-9
7-103657-0
7-103657-1
7-103657-2
7-103657-3
7-103657-4
Plating C
6-103656-2
6-103656-3
6-103656-4
6-103656-5
6-103656-6
6-103656-7
6-103656-8
6-103656-9
7-103656-0
7-103656-1
7-103656-2
7-103656-3
7-103656-4
Plating A
Plating B
6-103655-2
6-103655-3
6-103655-4
6-103655-5
6-103655-6
6-103655-7
6-103655-8
6-103655-9
7-103655-0
7-103655-1
7-103655-2
7-103655-3
7-103655-4
Plating C
6-103654-2
13
14
15
16
17
18
19
20
21
22
23
24
25
1.398 [35.51]
1.498 [38.05]
1.598 [40.59]
1.698 [43.13]
1.798 [45.67]
1.898 [48.20]
1.998 [50.75]
2.098 [53.29]
2.198 [55.83]
2.298 [58.37]
2.398 [60.91]
2.498 [63.45]
2.598 [65.99]
6-103895-2
6-103895-3
6-103895-4
6-103895-5
6-103895-6
6-103895-7
6-103895-8
6-103895-9
7-103895-0
7-103895-1
7-103895-2
7-103895-3
7-103895-4
1-104503-2
1-104503-3
1-104503-4
1-104503-5
1-104503-6
1-104503-7
1-104503-8
1-104503-9
2-104503-0
2-104503-1
2-104503-2
2-104503-3
2-104503-4
6-103654-3
6-103654-4
6-103654-5
6-103654-6
6-103654-7
6-103654-8
6-103654-9
7-103654-0
7-103654-1
7-103654-2
7-103654-3
7-103654-4
5
Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted
into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with Tyco Electronics pistol grip
hand tool.
2. Use Extraction/Lance Reset Tool No. 843477-1 to remove pin contacts.
Note: All part numbers are RoHS compliant.
239
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs
.307
[7.80]
Single-Row
A
Material
Black thermoplastic, 94V-0 rated
.582
[14.78]
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
No. of
Pos.
Dimension
A
Single-Row
Coupling Shroud
No. of
Pos.
Dimension
A
Single-Row
Coupling Shroud
4
5
6
7
8
.485 [12.32]
103680-1
103680-2
103680-3
103680-4
103680-5
103680-6
103680-7
103680-8
103680-9
1-103680-0
1-103680-1
15
16
17
18
19
20
21
22
23
24
25
1.585 [40.26]
1.685 [42.80]
1.785 [45.34]
1.885 [47.88]
1.985 [50.42]
2.085 [52.96]
2.185 [55.50]
2.285 [58.04]
2.385 [60.58]
2.485 [63.12]
2.585 [65.66]
1-103680-2
1-103680-3
1-103680-4
1-103680-5
1-103680-6
1-103680-7
1-103680-8
1-103680-9
2-103680-0
2-103680-1
2-103680-2
.585 [14.86]
.685 [17.40]
.785 [19.94]
.885 [22.48]
.985 [25.02]
1.085 [27.56]
1.185 [30.10]
1.285 [32.64]
1.385 [35.18]
1.485 [37.72]
9
10
11
12
13
14
Pin Assemblies with Guide
Ribs, Installed in Panel
Mount Pin Shroud (Refer to
pages 238, 239 & 242)
Pin Assembly,
Shrouded
Polarized/Latching
(Refer to pages
236 & 237)
5
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233, 235)
Single-Row
Coupling Shroud
Headers, Polarized/Latching,
Straight and Right Angle Post,
with or without Holddown
(See pages 244-252)
Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products
Note: All part numbers are RoHS compliant.
240
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued)
Double-Row
Material
Black thermoplastic, 94V-0 rated
.735
[18.67]
Position No. 1
Identification
Technical Documents
pages 277, 278
—
A
Product Specification
108-25034
Application Specification
114-25026
No. of
Pos.
Dimension
A
Double-Row
Coupling Shroud
8
.585 [14.86]
103681-1
103681-2
103681-3
103681-4
103681-5
104500-1
104500-2
104500-3
104500-4
104500-5
104500-6
104500-7
104500-8
104500-9
1-104500-0
1-104500-1
10
12
14
16
18
20
22
24
26
28
30
32
34
40
50
.685 [17.40]
.785 [19.94]
.885 [22.48]
.985 [25.02]
1.085 [27.56]
1.185 [30.10]
1.285 [32.64]
1.385 [35.18]
1.485 [37.72]
1.585 [40.26]
1.685 [42.80]
1.785 [45.34]
1.885 [47.88]
2.185 [55.50]
2.685 [68.20]
AMPMODU Shrouded
Headers Double-Row, Straight
or Right–Angle Post1
5
Double-Row
Coupling Shroud
Receptacle
Assemblies with Guide
Ribs (Refer to pages
232, 233 & 235)
1Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline
1of last post to inside of end shroud wall.
Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products
Note: All part numbers are RoHS compliant.
241
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row
.310
[7.87]
Material
Black thermoplastic, 94V-0 rated
A
.250
Technical Documents
pages 277, 278
—
[6.35]
Product Specification
108-25034
Application Specification
114-25026
.990
[25.15]
Position No. 1
Identification
.320
[8.13]
.320
[8.13]
.270
[6.86]
B
5
Dimensions
Dimensions
No. of
Pos.
Panel Mount
No. of
Pos.
Panel Mount
Pin Shroud
Pin Shroud
103682-1
103682-2
103682-3
103682-4
103682-5
103682-6
103682-7
103682-8
103682-9
1-103682-0
1-103682-1
1-103682-2
A
B
A
B
2
3
4
5
6
7
8
9
.735 [18.67]
.835 [21.21]
.935 [23.75]
1.035 [26.29]
1.135 [28.83]
1.235 [31.37]
1.335 [33.91]
1.435 [36.45]
.625 [15.88]
.725 [18.42]
.825 [20.96]
.925 [23.50]
1.025 [26.04]
1.125 [28.58]
1.225 [31.12]
1.325 [33.66]
1.425 [36.20]
1.525 [38.74]
1.625 [41.28]
1.725 [43.82]
14 1.935 [49.15]
15 2.035 [51.69]
16 2.135 [54.23]
17 2.235 [56.77]
18 2.335 [59.31]
19 2.435 [61.85]
20 2.535 [64.39]
21 2.635 [66.93]
22 2.735 [69.47]
23 2.835 [72.01]
24 2.935 [74.55]
25 3.035 [77.09]
1.825 [46.36]
1.925 [48.90]
2.025 [51.44]
2.125 [53.98]
2.225 [56.52]
2.325 [59.06]
2.425 [61.60]
2.525 [64.14]
2.625 [66.68]
2.725 [69.22]
2.825 [71.76]
2.925 [74.30]
1-103682-3
1-103682-4
1-103682-5
1-103682-6
1-103682-7
1-103682-8
1-103682-9
2-103682-0
2-103682-1
2-103682-2
2-103682-3
2-103682-4
10 1.535 [38.99]
11 1.635 [41.53]
12 1.735 [44.07]
13 1.835 [46.61]
Note: All part numbers are RoHS compliant.
242
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
Panel Mount Pin Shrouds for MTE Pin Assemblies
with Guide Ribs, Single-Row (Continued)
Material
Black thermoplastic, 94V-0 rated
Technical Documents
pages 277, 278
—
Pin Assembly with
Guide Ribs (Refer to
pages 238 & 239)
Product Specification
108-25034
Application Specification
114-25026
Panel Mount
Pin Shroud
Receptacle Assemblies with Guide
Ribs, Installed in
Single-Row Coupling Shroud
(Refer to pages 232, 233, 235 & 240)
Rear of Panel
Receptacle Assembly,
Polarized/Latching (Refer
to pages 230 & 231)
Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products
5
243
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline
.025 [0.64] Square
Straight Post (With or
Without Swaged Tail)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
A
B
Material and Finish
.230
[5.84]
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
.200
[5.08]
C
.100
[2.54]
Ref.
.060
[1.52]
(Contact Area)
X
.130
[3.30]
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
.275
[6.98]
.200
[5.08]
.100
[2.54]
.120
[3.05]
Typ.
.350
[8.89]
X
.060
Section X-X
[1.52]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
C
.100*
[2.54]
Typ.
Related Product Data
.035 .003
[0.89 0.08]
Mateable AMPMODU MTE
Dia. Typ.
Dia. Typ.
Products —
5
or
.040 .003
[1.02 0.08]
(for Retention Tails)
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
Recommended PC Board Hole Layout
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
* .003 [ 0.08]ꢀ tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
pages 232, 233, 235, 240
Technical Documents
pages 277, 278
—
Product Specification
108-25034
Application Specification
114-25026
244
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Polarized/Latching,
Single-Row .100 [2.54] Centerline (Continued)
Dimensions
B
.220 [5.59]
.320 [8.13]
Polarized/Latching Header With Swage
Polarized/Latching Header Without Swage
No. of
Pos.
A
C
Plating A
5-103908-1
5-103908-2
5-103908-3
5-103908-4
5-103908-5
5-103908-6
5-103908-7
5-103908-8
5-103908-9
6-103908-0
6-103908-1
6-103908-2
6-103908-3
6-103908-4
6-103908-5
6-103908-6
6-103908-7
6-103908-8
6-103908-9
7-103908-0
7-103908-1
7-103908-2
7-103908-3
7-103908-4
Plating B
5-104362-1
5-104362-2
5-104362-3
5-104362-4
5-104362-5
5-104362-6
5-104362-7
5-104362-8
5-104362-9
6-104362-0
6-104362-1
6-104909-2
6-104909-3
6-104909-4
6-104909-5
6-104909-6
6-104909-7
6-104909-8
6-104909-9
7-104909-0
7-104909-1
7-104909-2
7-104909-3
7-104909-4
Plating C
5-103669-1
5-103669-2
5-103669-3
5-103669-4
5-103669-5
5-103669-6
5-103669-7
5-103669-8
5-103669-9
6-103669-0
6-103669-1
6-103669-2
6-103669-3
6-103669-4
6-103669-5
6-103669-6
6-103669-7
6-103669-8
6-103669-9
7-103669-0
7-103669-1
7-103669-2
7-103669-3
7-103669-4
Plating A
5-103735-1
5-103735-2
5-103735-3
5-103735-4
5-103735-5
5-103735-6
5-103735-7
5-103735-8
5-103735-9
6-103735-0
6-103735-1
6-103735-2
6-103735-3
6-103735-4
6-103735-5
6-103735-6
6-103735-7
6-103735-8
6-103735-9
7-103735-0
7-103735-1
7-103735-2
7-103735-3
7-103735-4
Plating B
5-104363-1
5-104363-2
5-104363-3
5-104363-4
5-104363-5
5-104363-6
5-104363-7
5-104363-8
5-104363-9
6-104363-0
6-104363-1
6-104910-2
6-104910-3
6-104910-4
6-104910-5
6-104910-6
6-104910-7
6-104910-8
6-104910-9
7-104910-0
7-104910-1
7-104910-2
7-104910-3
7-104910-4
Plating C
5-103639-1
5-103639-2
5-103639-3
5-103639-4
5-103639-5
5-103639-6
5-103639-7
5-103639-8
5-103639-9
6-103639-0
6-103639-1
6-103639-2
6-103639-3
6-103639-4
6-103639-5
6-103639-6
6-103639-7
6-103639-8
6-103639-9
7-103639-0
7-103639-1
7-103639-2
7-103639-3
7-103639-4
2
3
4
5
6
7
8
9
.300 [7.62]
.400 [10.16]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
.500 [12.70] .420 [10.67]
.600 [15.24] .520 [13.21]
.700 [17.78] .620 [15.75]
.800 [20.32] .720 [18.29]
.900 [22.86] .820 [20.83]
1.000 [25.40] .920 [23.37]
10 1.100 [27.94] 1.020 [25.91]
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40]
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94]
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48]
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02]
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56]
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10]
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64]
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18]
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72]
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26]
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80]
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34]
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88]
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42]
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96]
Notes: 1. Selectively loaded headers are available, consult Tyco Electronics.
2. Use Keying Tool No. 91417-1 to remove post for keying.
5
Note: All part numbers are RoHS compliant.
245
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
With Holddown
.025 [0.64] Square
Right-Angle Post
.535
[13.59]
Position No. 1 Indicator
A
B
.100
C
.230
[5.84]
[2.54]
.200
[5.08]
Material and Finish
.060
[1.52]
.100
[2.54]
.200
[5.08]
(Contact Area)
Typ.
Ref.
X
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated as follows:
.275
[6.99]
.365
[9.27]
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder area, with
entire post underplated .000050
[0.00127] nickel
.130
[3.30]
.120
[3.05]
X
.350
[8.89]
.145
[3.68]
.060
[1.52]
.134 .003
[3.40 0.08]
(2 Plc.)
Dia.
Section X-X
.340 .003
[8.64 0.08]
.100*
[2.54]
.055 .003
Typ.
Typ.
Typ.
[1.40 0.08]
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
post
.035 .003
[0.89 0.08]
Dia. Typ.
C
Recommended PC Board Hole Layout
(PC board thickness (for Holddown Feature) is .062 .008[1.57 0.20])
* .003 [ 0.08]ꢀ tolerance not to accumulate within one connector pattern.
Without Holddown
5
.535
[13.59]
Related Product Data
Position No. 1 Indicator
A
Mateable AMPMODU MTE
Products —
B
.060
.230
[5.84]
[1.52]
C
Receptacle Assemblies
.200
[5.08]
.100
[2.54]
(Latching) — pages 230, 231
.100
[2.54]
Ref.
Typ.
X
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
(Contact Area)
.275
[6.99]
.200
[5.08]
pages 232, 233, 235, 240
.130
[3.30]
.120
[3.05]
Technical Documents
—
pages 277, 278
X
.350
[8.89]
.145
[3.68]
.060
[1.52]
Product Specification
108-25034
Application Specification
114-25026
C
Section X-X
.100*
[2.54]
Typ.
.035 .003
[0.89 0.08]
Dia. Typ.
Recommended PC Board Hole Layout
* .003 [ 0.08]ꢀ tolerance not to accumulate within one connector pattern.
246
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline (Continued)
Dimensions
B
.220 [5.59]
.320 [8.13]
Latching Header With Hold Down
Plating A Plating C
Latching Header Without Hold Down
Plating A Plating C
No. of
Pos.
A
C
Plating B
5-103673-1
5-103673-2
5-103673-3
5-103673-4
5-103673-5
5-103673-6
5-103673-7
5-103673-8
5-103673-9
6-103673-0
6-103673-1
6-103673-2
6-103673-3
6-103673-4
6-103673-5
6-103673-6
6-103673-7
6-103673-8
6-103673-9
7-103673-0
7-103673-1
7-103673-2
7-103673-3
7-103673-4
Plating B
5-103635-1
5-103635-2
5-103635-3
5-103635-4
5-103635-5
5-103635-6
5-103635-7
5-103635-8
5-103635-9
6-103635-0
6-103635-1
6-103635-2
6-103635-3
6-103635-4
6-103635-5
6-103635-6
6-103635-7
6-103635-8
6-103635-9
7-103635-0
7-103635-1
7-103635-2
7-103635-3
7-103635-4
2
3
4
5
6
7
8
9
.300 [7.62]
.400 [10.16]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
5-103904-1
5-103904-2
5-103904-3
5-103904-4
5-103904-5
5-103904-6
5-103904-7
5-103904-8
5-103904-9
6-103904-0
6-103904-1
6-103904-2
6-103904-3
6-103904-4
6-103904-5
6-103904-6
6-103904-7
6-103904-8
6-103904-9
7-103904-0
7-103904-1
7-103904-2
7-103904-3
7-103904-4
5-103672-1
5-103672-2
5-103672-3
5-103672-4
5-103672-5
5-103672-6
5-103672-7
5-103672-8
5-103672-9
6-103672-0
6-103672-1
6-103672-2
6-103672-3
6-103672-4
6-103672-5
6-103672-6
6-103672-7
6-103672-8
6-103672-9
7-103672-0
7-103672-1
7-103672-2
7-103672-3
7-103672-4
5-104935-5
5-104935-3
5-104935-1
5-104935-6
5-104935-7
5-104935-8
5-104935-2
5-104935-9
6-104935-0
6-104935-1
5-104935-4
6-104935-2
6-104935-3
6-104935-4
6-104935-5
6-104935-6
6-104935-7
6-104935-8
6-104935-9
7-104935-0
7-104935-1
7-104935-2
7-104935-3
7-104935-4
5-103634-1
5-103634-2
5-103634-3
5-103634-4
5-103634-5
5-103634-6
5-103634-7
5-103634-8
5-103634-9
6-103634-0
6-103634-1
6-103634-2
6-103634-3
6-103634-4
6-103634-5
6-103634-6
6-103634-7
6-103634-8
6-103634-9
7-103634-0
7-103634-1
7-103634-2
7-103634-3
7-103634-4
.500 [12.70] .420 [10.67]
.600 [15.24] .520 [13.21]
.700 [17.78] .620 [15.75]
.800 [20.32] .720 [18.29]
.900 [22.86] .820 [20.83]
1.000 [25.40] .920 [23.37]
10 1.100 [27.94] 1.020 [25.91]
11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40]
12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94]
13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48]
14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02]
15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56]
16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10]
17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64]
18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18]
19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72]
20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26]
21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80]
22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34]
23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88]
24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42]
25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96]
Notes: 1. Selectively loaded headers are available, consult Tyco Electronics.
2. Use Keying Tool No. 91417-1 to remove post for keying.
5
Note: All part numbers are RoHS compliant.
247
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
A
B
C
.060
[1.52]
(2 Plc.)
Material and Finish
.070
[1.78]
Housing — Black thermoplastic,
94V-0 rated
Posts — Brass, plated .000100
[0.00254] tin over .000050 [0.00127]
nickel on entire post
.120
[3.05]
X
X
.100
[2.54]
.050
[1.27]
Dia.
.260
[6.60]
.200
[5.08]
Related Product Data
.060
[1.52]
.050
[1.27]
.100
[2.54]
Typ.
Mateable AMPMODU MTE
Products —
Receptacle Assemblies
(Polarized/Latching) —
pages 230, 231
.230
[5.84]
.130
[3.30]
.065 .003
[1.65 0.08]
Dia.
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
C
.100*
[2.54]
Typ.
.135 .003
[3.43 0.08]
pages 232, 233, 235, 240
.075 .003
[1.91 0.08]
.350
[8.89]
Technical Documents
—
.040 .003
[1.02 0.08]
(for Retention Tails)
Dia. Typ.
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Section X-X
Recommended PC Board Hole Layout
* .003 [ 0.08]ꢀ tolerances not to accumulate within one connector pattern.
Note: Swaged retention tails are provided in a minimum of two locations per header.
5
Dimensions
B
No. of
Pos.
Latching
Header
A
C
2
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
5-104450-1
5-104450-2
5-104450-3
5-104450-4
5-104450-5
5-104450-6
5-104450-7
5-104450-8
5-104450-9
4
5
6
7
8
9
10
Note: All part numbers are RoHS compliant.
248
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Through-hole, Surface Mount Compatible,
Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline
.025 [0.64] Square Straight
Post (With Swaged Tails
and PC Board Orientation)
.535
[13.59]
Swaged Retention Tail
(See Note)
Position No. 1 Indicator
A
B
.230
[5.84]
C
Material and Finish
.100
.200
[5.08]
(Contact Area)
[2.54]
.060
[1.52]
Ref.
Housing — Black thermoplastic,
94V-0 rated
X
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
.262
[6.65]
.120
[3.05]
.200
[5.08]
.100
[2.54]
Typ.
.350
[8.89]
.060
[1.52]
.130
[3.30]
X
Related Product Data
Section X-X
Mateable AMPMODU MTE
Products —
.040 .002
.100*
[2.54]
Typ.
Typ.
[1.02 0.05]
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) —
.065 .003
[1.65 0.08]
.180 .002
[4.57 0.05]
.135 .003
[3.43 0.08]
pages 232, 233, 235, 240
Receptacle Assemblies (Polarized
Latching) — pages 230, 231
.040 .003
.020 .002
[0.51 0.05]
Typ.
Dia. Typ.
[1.02 0.08]
Plated-Thru Hole
Header Profile (Shown for
orientation purposes only)
.075 .003
[1.90 0.08]
Technical Documents
—
5
pages 277, 278
Product Specification
108-25034
Application Specification
114-25026
Recommended PC Board Hole Layout
(Stencil Thickness = .010 [0.25])
* .003 [ 0.08] tolerance not to accumulate within one connector pattern
Dimensions
No. of
Pos.
Polarized/Latching
Header, High-Temp
A
B
C
2
3
.300 [7.62]
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.45]
1.220 [30.99]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
5-104809-1
5-104809-2
5-104809-3
5-104809-4
5-104809-5
5-104809-6
5-104809-7
5-104809-8
5-104809-9
6-104809-0
6-104809-1
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
4
5
6
7
8
9
10
11
12
Note: All part numbers are RoHS compliant.
249
Catalog 1307819
Revised 8-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Polarized/Latching, Through-Hole,
Surface Mount Compatible, Single-Row, .100 [2.54] Centerline
.025 [0.64] Square
Right-Angle Post (With
Holddown)
.535
[13.59]
Position No. 1 Indicator
.230
[5.84]
A
B
C
.060
[1.52]
(2 Plc.)
.100
[2.54]
.200
[5.08]
Ref.
.100
[2.54]
Material and Finish
Typ.
.120
[3.05]
X
(Contact Area)
Housing — Black thermoplastic,
94V-0 rated
.262
[6.65]
.200
[5.08]
Posts — Brass, duplex plated .000015
[0.00038] gold on contact area, .000100
[0.00254] min. tin on solder tail, with
entire post underplated .000050
[0.00127] nickel
.145
[3.68]
.180
[4.57]
.060
[1.52]
X
.350
[8.89]
.145
[3.68]
Section X-X
Related Product Data
+.003
.093
Dia.
-.000
+0.08
-.000
.093
Mateable AMPMODU MTE
Products —
2.36
[
]
(2 Plc.)
.
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
.340 .003
[8.64 0.08]
.090 .002
[2.29 0.05]
.100*
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
Typ.
[2.54]
.070 .002
[1.78 0.51]
Typ.
.058 .003
[1.47 0.08]
(2 Plc.)
.035 .003
[0.89 0.08]
Dia. Typ.
C
Plated-Thru Hole
Technical Documents
pages 277, 278
—
Recommended PC Board
(Stencil Thickness = .010 [0.25])
5
Product Specification
* .003 [ 0.08]ꢀ tolerance is not to accumulate within one connector pattern.
108-25034
Application Specification
114-25026
Right-Angle
Header
with Hold Down
Right-Angle
Header
with Hold Down
Dimensions
B
Dimensions
B
No. of
Pos.
No. of
Pos.
A
C
A
C
2
3
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
1.300 [33.02]
1.400 [35.56]
.220 [5.59]
.320 [8.13]
.100 [2.54]
.200 [5.08]
5-104361-1
5-104361-2
5-104361-3
5-104361-4
5-104361-5
5-104361-6
5-104361-7
5-104361-8
5-104361-9
6-104361-0
6-104361-1
6-104361-2
14
15
16
17
18
19
20
21
22
23
24
25
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
2.500 [63.50]
2.600 [66.04]
1.420 [36.07]
1.520 [38.61]
1.620 [41.15]
1.720 [43.69]
1.820 [46.23]
1.920 [48.77]
2.020 [51.31]
2.120 [53.85]
2.220 [56.39]
2.320 [58.93]
2.420 [61.47]
2.520 [64.01]
1.300 [33.02]
1.400 [35.56]
1.500 [38.10]
1.600 [40.64]
1.700 [43.18]
1.800 [45.72]
1.900 [48.26]
2.000 [50.80]
2.100 [53.34]
2.200 [55.88]
2.300 [58.42]
2.400 [60.96]
6-104361-3
6-104361-4
6-104361-5
6-104361-6
6-104361-7
6-104361-8
6-104361-9
7-104361-0
7-104361-1
7-104361-2
7-104361-3
7-104361-4
4
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
1.020 [25.91]
1.120 [28.44]
1.220 [30.99]
1.320 [33.53]
.300 [7.62]
5
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.200 [30.48]
6
7
8
9
10
11
12
13
Note: All part numbers are RoHS compliant.
250
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Right-Angle, Polarized/Latching, Surface Mount
E
.025
[0.64]
Typ.
.136 .001
[3.45 0.02]
2 Plc
.120
[3.05]
Ø.085 .002
[2.16 0.05]
.065 Min Pad on
[1.65] Underside 2 Plc
.140
[3.56]
.535
[13.59]
.190 .001
[4.83 0.02]
2 Plc
.265
[6.73]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
.165 .003
[4.19 0.07]
+ .002
.047
-.003
Ø
+ 0.05
- 0.07
.133
[3.38]
Typ
1.19
[
]
Posts — Brass, plated as follows:
Position No. 1 Indicator
.070 .002
[1.78 0.05]
(Plated thru hole)
2 Plc
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
A
C
.038
[0.97]
Recommended PC Board Layout
.350
[8.89]
.200
[5.08]
Contact Area
B
K
Ref
.120
[3.05]
Plating C — .000100 [.00254] tin over
.000050 [.00127] nickel on entire post
.262
[6.65]
.200
[5.08]
K
.457
[11.61]
Ref
.002
[0.05]
(Tangent
of heel)
See L
C
Recommended
PC Board Layout
(Refer to MTE Application Spec.
114-25026 for Stencil Aperture Layout
Using .006 [0.152] or .008 [0.203]
Stencil Thickness)
D
.076
[1.93]
Section K-K
Related Product Data
Mateable AMPMODU MTE
Products —
.288
[7.32]
Ref
.054/.039
[1.37/0.99]
Receptacle Assemblies (Polarized/
View L
Latching) — pages 230, 231
.140 .002
[3.56 0.05]
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
5
Dimensions
Right-Angle Latching SMT Headers
No. of
Pos.
A
B
C
D
E
Plating A
5-147323-1
5-147323-2
5-147323-3
5-147323-4
5-147323-5
5-147323-6
5-147323-7
5-147323-8
5-147323-9
6-147323-0
6-147323-1
6-147323-2
6-147323-3
6-147323-4
6-147323-5
6-147323-6
6-147323-7
6-147323-8
6-147323-9
7-147323-0
7-147323-1
7-147323-2
7-147323-3
7-147323-4
Plating B
5-147278-1
5-147278-2
5-147278-3
5-147278-4
5-147278-5
5-147278-6
5-147278-7
5-147278-8
5-147278-9
6-147278-0
6-147278-1
6-147278-2
6-147278-3
6-147278-4
6-147278-5
6-147278-6
6-147278-7
6-147278-8
6-147278-9
7-147278-0
7-147278-1
7-147278-2
7-147278-3
7-147278-4
Plating C
5-147324-1
5-147324-2
5-147324-3
5-147324-4
5-147324-5
5-147324-6
5-147324-7
5-147324-8
5-147324-9
6-147324-0
6-147324-1
6-147324-2
6-147324-3
6-147324-4
6-147324-5
6-147324-6
6-147324-7
6-147324-8
6-147324-9
7-147324-0
7-147324-1
7-147324-2
7-147324-3
7-147324-4
2
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
.220 [5.59]
.320 [8.13]
.420 [10.67]
.520 [13.21]
.620 [15.75]
.720 [18.29]
.820 [20.83]
.920 [23.37]
.100 [2.54]
.200 [5.08]
.300 [7.62]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.900 [22.86]
.140 [3.56]
.190 [4.83]
.240 [6.10]
.290 [7.37]
.340 [8.64]
.390 [9.91]
.440 [11.18]
.490 [12.45]
.290 [7.37]
.390 [9.91]
.490 [12.45]
.590 [14.99]
.690 [17.53]
.790 [20.07]
.890 [22.61]
.990 [25.15]
3
Technical Documents
—
pages 277, 278
4
5
Product Specification
108-25034
Application Specification
114-25026
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1.200 [30.48] 1.020 [25.91]
.540 [13.72] 1.090 [27.69]
.590 [14.99] 1.190 [30.23]
.640 [16.26] 1.290 [32.77]
.690 [17.53] 1.390 [35.31]
.740 [18.80] 1.490 [37.85]
.790 [20.07] 1.590 [40.39]
.840 [21.34] 1.690 [42.93]
.890 [22.61] 1.790 [45.47]
.940 [23.88] 1.890 [48.01]
.990 [25.15] 1.990 [50.55]
1.300 [33.02] 1.120 [28.45] 1.000 [25.40]
1.400 [35.56] 1.220 [30.99] 1.100 [27.94]
1.500 [38.10] 1.320 [33.53] 1.200 [30.48]
1.600 [40.64] 1.420 [36.07] 1.300 [33.02]
1.700 [43.18] 1.520 [38.61] 1.400 [35.56]
1.800 [45.72] 1.620 [41.15] 1.500 [38.10]
1.900 [48.26] 1.720 [43.69] 1.600 [40.64]
2.000 [50.80] 1.820 [46.23] 1.700 [43.18]
2.100 [53.34] 1.920 [48.77] 1.800 [45.72]
2.200 [55.88] 2.020 [51.31] 1.900 [48.26] 1.040 [26.42] 2.090 [53.09]
2.300 [58.42] 2.120 [53.85] 2.000 [50.80] 1.090 [27.69] 2.190 [55.63]
2.400 [60.96] 2.220 [56.39] 2.100 [53.34] 1.140 [28.96] 2.290 [58.17]
2.500 [63.50] 2.320 [58.93] 2.200 [55.88] 1.190 [30.23] 2.390 [60.71]
2.600 [66.04] 2.420 [61.47] 2.300 [58.42] 1.240 [31.50] 2.490 [63.25]
2.700 [68.58] 2.520 [64.01] 2.400 [60.96] 1.290 [32.77] 2.590 [65.79]
Note: All part numbers are RoHS
compliant.
251
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
MTE Headers, Vertical, Polarized/Latching, Surface Mount
E
.075
[1.90]
.025
[0.62]
Typ.
.535
[13.59]
.313
[7.62]
.063
[1.52]
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Position No. 1 Indicator
A
B
.230
[5.84]
Posts — Brass, plated as follows:
.025
[0.64]
Typ.
K
Plating A — Duplex plated .000030
[.00076] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
Plating B — Duplex plated .000015
[.00038] gold on contact area, .000100
[.00254] min. tin on solder area, with
entire post underplated .000050
[.00127] nickel.
.100
[2.54]
.120
K
Pick and Place Cap
[3.05]
.200
[5.08]
Section K-K
.100
[2.54]
Typ.
.055 .003
[1.40 0.08]
+ .002
– .003
+ 0.05
Plating C — .000100 [.00254] tin
over .000050 [.00127] nickel on entire
post
Ø .052
.088 .003
[2.25 0.08]
1.32
[
]
– 0.07
Plated Thru-Hole
Recommended
PC Board Layout
.070 .002
[1.78 0.05]
Ø
.113
[2.88]
.227
[5.76]
(Refer to MTE Application Spec.
114-25026 for Stencil Aperature Layout
using .006 [0.152] or .008 [0.203]
stencil thickness
C
D
0.06
[1.53]
Position No. 1
Recommended PC Board Layout
Dimensions
Related Product Data
Mateable AMPMODU MTE
Products —
Receptacle Assemblies (Polarized/
Latching) — pages 230, 231
Receptacle Assemblies with Guide
Ribs (installed in Single-Row
Coupling Shroud) — pages 232, 233,
235, 240
5
Vertical SMT Headers
No. of
Pos.
A
B
C
D
E
Plating A
Plating B
Plating C
2
.300[7.62]
.220[5.59]
.100[2.54]
.220[5.60]
.110[2.80]
5-1375583-1
5-1375582-1 5-1375549-1
3
4
5
6
7
8
9
.400[10.16]
.500[12.70]
.600[15.24]
.700[17.78]
.800[20.32]
.900[22.86]
1.000[25.40]
.320[8.13]
.200[5.08]
.300[7.62]
.400[10.16]
.500[12.70]
.600[15.24]
.700[17.78]
.800[20.32]
.900[22.86]
.320[8.14]
.420[10.68]
.520[13.22]
.620[15.76]
.720[18.30]
.820[20.84]
.920[23.38]
1.020[25.92]
1.120[28.46]
1.220[31.00]
1.320[33.54]
1.420[36.08]
1.520[38.62]
1.620[41.16]
1.720[43.70]
1.820[46.24]
1.920[48.78]
2.020[51.32]
2.120[53.86]
2.220[56.40]
2.320[58.94]
2.420[61.48]
2.520[64.02]
.160[4.07]
.210[5.34]
5-1375583-2
5-1375583-3
5-1375583-4
5-1375583-5
5-1375583-6
5-1375583-7
5-1375583-8
5-1375583-9
6-1375583-0
6-1375583-1
6-1375583-2
6-1375583-3
6-1375583-4
6-1375583-5
6-1375583-6
6-1375583-7
6-1375583-8
6-1375583-9
7-1375583-0
7-1375583-1
7-1375583-2
7-1375583-3
7-1375583-4
5-1375582-2 5-1375549-2
5-1375582-3 5-1375549-3
5-1375582-4 5-1375549-4
5-1375582-5 5-1375549-5
5-1375582-6 5-1375549-6
5-1375582-7 5-1375549-7
5-1375582-8 5-1375549-8
5-1375582-9 5-1375549-9
6-1375582-0 6-1375549-0
6-1375582-1 6-1375549-1
6-1375582-2 6-1375549-2
6-1375582-3 6-1375549-3
6-1375582-4 6-1375549-4
6-1375582-5 6-1375549-5
6-1375582-6 6-1375549-6
6-1375582-7 6-1375549-7
6-1375582-8 6-1375549-8
6-1375582-9 6-1375549-9
7-1375582-0 7-1375549-0
7-1375582-1 7-1375549-1
7-1375582-2 7-1375549-2
7-1375582-3 7-1375549-3
7-1375582-4 7-1375549-4
.420[10.67]
.520[13.21]
.620[15.75]
.720[18.29]
.820[20.83]
.920[23.37]
.260[6.61]
.310[7.88]
.360[9.15]
.410[10.42]
.460[11.69]
.510[12.96]
.560[14.23]
.610[15.50]
.660[16.77]
.710[18.04]
.760[19.31]
.810[20.58]
.860[21.85]
.910[23.12]
.960[24.39]
1.010[25.66]
1.060[26.93]
1.110[28.20]
1.160[29.47]
1.210[30.74]
1.260[32.01]
Technical Documents
pages 277, 278
—
10 1.100[27.94] 1.020[25.91]
Product Specification
108-25034
Application Specification
114-25026
11 1.200[30.48] 1.120[28.45] 1.000[25.40]
12 1.300[33.02] 1.220[30.99] 1.100[27.94]
13 1.400[35.56] 1.320[33.53] 1.200[30.48]
14 1.500[38.10] 1.420[36.07] 1.300[33.02]
15 1.600[40.64] 1.520[38.61] 1.400[35.56]
16 1.700[43.18] 1.620[41.15] 1.500[38.10]
17 1.800[45.72] 1.720[43.69] 1.600[40.64]
18 1.900[48.26] 1.820[46.23] 1.700[43.18]
19 2.000[50.80] 1.920[48.77] 1.800[45.72]
20 2.100[53.34] 2.020[51.31] 1.900[48.26]
21 2.200[55.88] 2.120[53.85] 2.000[50.80]
22 2.300[58.42] 2.220[56.39] 2.100[53.34]
23 2.400[60.96] 2.320[58.93] 2.200[55.88]
24 2.500[63.50] 2.420[61.47] 2.300[58.42]
25 2.600[66.04] 2.520[64.01] 2.400[60.96]
Note: All part numbers are RoHS
compliant.
252
Catalog 1307819
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Revised 8-08
millimeters unless otherwise
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
Interchangeable Contacts, Wire Crimp (Snap-In)
Material and Finish
Short Point Receptacles
.068
[1.73]
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
.060
[1.52]
.460
[11.68]
C
C
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
.012
[0.30]
Gap
Section C - C
Extraction/Lance Reset
Tool No. 843477-1
5
Related Product Data
Technical Documents —
pages 277, 278
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Product Specification
108-1472, 108-1472-1
Application Specification
114-25038
Application Tooling—
pages 270-272
Heavy Duty Miniature
Applicator for
Applicator for
Wire Size
Range
Ins.
Dia.
Range
Contact Part No.
Hand
Tool
Nos.
AMP-O-MATIC
Stripper/Crimper
Machine
(Standard Pressure)
Finish
AMP-O-LECTRIC
AWG
[mm2]
Strip Form Loose Piece
Machine*
Plating A 1-104481-1
Plating B 1-104481-0
Plating C 5-104481-2
Plating A 1-104480-3
Plating B 1-104480-2
Plating C 1-104480-7
Plating A 1-104479-0
1-104481-3
1-104481-2
5-104481-6
1-104480-6
1-104480-5
1-104480-4
1-104479-3
1-104479-2
1-104479-1
.025-.060
32-28
26-22
24-20
0.03-0.08
567296-2
567297-2
567298-2
466980-1
466981-1
466982-1
91518-1
91518-1
91551-1
0.64-1.52
.025-.060
0.64-1.52
0.13-0.3
0.2-0.5
.025-.060
0.64-1.52
Plating B
Plating C
104479-9
104479-8
*For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Note: All part numbers are RoHS compliant.
253
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
AMPMODU Interconnection System
Interchangeable Contacts, Wire Crimp (Snap-In) (Continued)
Material and Finish
Pins
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area, .000030
[0.00076] min. tin in crimp area, with
entire contact underplated .000050
[0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area, .000030
[0.00076] min. tin on solder area, with
entire contact underplated .000050
[0.00127] nickel
Plating C — .000100 [0.00254] tin
over .000050 [0.00127] nickel on entire
contact
.025
[0.64]
.025
[0.64]
Extraction/Lance Reset
Tool No. 843477-1
.810
[20.57]
Related Product Data
Performance Characteristics —
page 221
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
pages 270-272
Technical Documents
—
pages 277, 278
5
Product Specification
108-25034
Application Specification
114-25026
Contact
Part No.
Applicator for
AMP-O-MATIC
Stripper/
Heavy Duty
Miniature Applicator
for AMP-O-LECTRIC
Machine*
Wire Size
Range
AWG
Hand
Tool
Nos.
Ins. Dia.
Range
(Standard Pressure)
Finish
[mm2]
Strip
Loose
Piece
Crimper
Form
Machine
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
5-104506-6
5-104506-4
5-104506-2
5-104505-6
5-104505-4
5-104505-2
5-104506-7
5-104506-5
5-104506-3
5-104505-7
5-104505-5
5-104505-3
.025-.054
32-28
0.03-0.08
—
—
58342-2
91531-1
0.64-1.37
.036-.054
0.91-1.37
26-22
0.14-0.32
567239-2
466983-1
*For use with AMP-O-LECTRIC Model “K” machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the
AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
Note: All part numbers are RoHS compliant.
254
Catalog 1307819
Revised 8-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
相关型号:
©2020 ICPDF网 联系我们和版权申明