5767117-3 [MACOM]
STEP-Z Interconnection System; STEP -Z互连系统
| 型号： | 5767117-3 |
| 厂家： | 
Tyco Electronics |
| 描述： | STEP-Z Interconnection System |
| 文件： | 总28页 (文件大小：945K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
STEP-Z Interconnection System (Continued)
25.00 [.984] Plugs
Position T25
28.60
25.50
[1.126]
[1.004]
Position A2
Position A1
A
Optional Pick-Up Cap
0.25
.010
]
25.95
[1.022
0.12
.005
]
24.65
[.970
Ø 0.76
[.030]
Solder Balls
0.55
[.022]
Ref.
Contacts In
These Rows Are
Tied Together
(Commoned)
2.00
[.079]
18.00 25.50
[.709] [1.004]
Ref.
9.00
[.354]
Ø 0.60–0.55
[.024–.022]
1.00 8x
[.039] 2 Plcs.
0.65
[.026]
73x
1.30
[.051]
Stencil Connector Outline
Onto Board
36x
C
B
A Ref.
Recommended PC Board Layout
Dimensions
B
Part Numbers
With Pick & Place Cap
No. of
Pos.*
Plating
A
C
ⅷ
SnPb
Pb-free
SnPb
2-1761614-5
38.20
31.85
15.93
200
296
1.504
1.254
.627
7-1761614-5
ⅷ
2-1761616-5
53.75
2.116
47.45
1.868
23.725
.934
Pb-free
7-1761616-5
* Signal contacts only, ground contacts not included.
Tray packaged Part Numbers shown. Contact Tyco Electronics Engineering for Tape and Reel
packaged versions.
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
13
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Introduction to the MICTOR Interconnection System
(0.64 [.025] Centerline)
Product Facts
I 76 dedicated signal lines
per linear inch
I Surface mount family
designed for parallel and
right-angle board-to-board,
flex-to-board and cable-to-
board configurations
I 0.64 [.025] centerline
contact spacing
I Redundant interfaces on
mated contacts
I Fifteen mated stack heights
available ranging from 6.60
[.260] to 31.90 [1.256]
I Infrared and forced air
convection compatible
housing materials
I Designed for 50-ohm
systems
I Connector housings
polarized for correct mating
I Built-in connector-to-board
retention feature
I Connector can be separated
by peeling from one end to
the other
The MICTOR connector
family is based on the
microstrip concept of two
rows of signal contacts
divided by a center power
ground plane. MICTOR
connectors are mother-
board and daughtercard
compatible and include
designs for cable-to-board
applications.
provided. The MICTOR
options are available to
meet the needs of various
applications.
I Various packaging styles
can be made available for
automated assembly
connector family is avail-
able in 0.64 [.025] center-
lines and in sizes ranging
from 38 signal positions to
266 positions (in increments
of 38 positions). There is a
discrete ground bus every
12.7 [.50] of the connector
length, which can be
The housing material is
a liquid crystal polymer,
compatible with infrared
and forced air convection
operations.
(tape and reel, tubes)
I Recognized under the
Component Program of
Underwriter
R
Laboratories Inc.
File No. E28476
The connector system uses
the solid ground bus
between the rows of signals
to provide low crosstalk and
excellent high-speed signal
characteristics.
assigned to either power or
ground in any combination.
Various mated heights are
available for parallel board-
to-board systems. Custom
stacking heights can be
Redundant interfaces on
every signal line provide
added reliability. Two plating
14
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Connector Cross Section
Compliant
SMT solder
lead design
Center ground bus for
improved signal integrity
and matched impedance
Redundant
points of
contact for
high reliability
Connectors are shown at point where signal contact first touch each other.
Connectors are designed to be fully mated when the two “Z” datums meet.
Green = Receptacle housing
Red
= Plug housing
Blue = Signal contacts
Brown = Ground bus contacts
15
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaagter_iHael aadndPerformance Specifications, MICTOR Connectors
Material
Material Specifications
Housing — Liquid crystal polymer, black
Contacts — High reliability copper alloy
Ground Bus — Phosphor bronze
Finish (Gold Plating)
Contacts and Ground Bus — Duplex plated 0.00076 [.000030] min. gold in mating area, 0.00381 [.000150] min. tin-lead on
leads, with entire contact and ground bus underplated 0.00178 [.000070] min. nickel
Finish (Palladium-Nickel Plating)
Contacts and Ground Bus — Duplex plated 0.000013 [.000005] min. gold over 0.00076 [.000030] min. palladium-nickel in
mating area, 0.00381 [.000150] min. tin-lead on leads, with entire contact and ground bus underplated 0.00178 [.000070] min.
nickel
Finish (Lead-Free Plating)
Contacts and Ground Bus — 0.00076 [.000030] min. gold on contact area, 0.00381-0.00635 [.000150-.000250] matte tin per
ASTM B 545 on leads, all over 0.00177-0.00445 [.000070-.000175] nickel.
Or
0.00013 [.000005] min. gold over, 0.00076 [.000030] min. palladium nickel on contact area, 0.00381-0.00635 [.000150-.000250]
matte tin per ASTM B 545 on leads, all over 0.00191-0.00445 [.000075-.000175] nickel.
Ratings
Performance Specifications
Voltage — 30 vac
Current — Signal; rated 1.0 Amps, fully derated 0.5 Amps
Ground; rated 11.5 Amps, fully derated 7.6 Amps
Temperature — -55°C to +125°C
Electrical Characteristics
Characteristic Impedance — 50 5 ohms at 1 ns
Termination Resistance — ∆R 10 milliohms max.; Specification 109-6-1
Insulation Resistance — 10,000 megohms min.; Specification 109-208-1
Dielectric Withstanding Voltage — 500 vac at sea level; Specification 109-29-1
Mechanical Characteristics
Solderability — Solderable area shall have a 95% min. solder coverage; Specification 109-11-1
Vibration (Random) — No discontinuities of 1 µs or longer duration; Specification 109-21-5
Physical Shock — No discontinuities of 1 µs or longer duration; Specification 109-26-1
Durability (Tested to) — Mate and unmate samples at a rate of 600 cycles max. per hour. 25 cycles, gold plating;
500 cycles, palladium-nickel plating; Specification 109-27
Contact Retention — 1 lb min.; Specification 109-30
Mating Force — 152 oz max. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus;
Specification 109-42
Unmating Force — 19 oz min. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus;
Specification 109-42
Environmental Characteristics
Thermal Shock — Subject mated samples to 5 cycles between -55°C and +125°C; Specification 109-22
Humidity - Temperature Cycling — Subject mated samples to 10 cycles between +25°C and +65°C at 95% RH;
Specification 109-23-3, Condition B
Temperature Cycling — Subject mated samples to 1024 cycles between -40°C and +60°C at 2 hours per cycle;
Specification 109-75-1
Temperature Life — Subject mated samples to temperature life at +118°C for 792 hours;
Specification 109-43
Mixed Flowing Gas — Subject mated samples to environmental class II for 14 days; Specification 109-85-2
16
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Stack Height Combinations
30 µ Gold and Palladium
Nickel Plated Vertical
Connectors
12.57 [.495] Plug
(Pages 25 and 26)
11.00 [.430] Plug
(Pages 23 and 24)
9.00 [.354] Plug
(Pages 21 and 22)
6.60 [.260] Plug
(Pages 19 and 20)
12.57
[.495]
11.00
[.430]
9.00
[.354]
6.60
[.260]
Standard Receptacle
(Pages 36 and 37)
Standard Receptacle
(Pages 36 and 37)
Standard Receptacle
(Pages 36 and 37)
Standard Receptacle
(Pages 36 and 37)
12.57 [.495] Plug
(Pages 25 and 26)
11.00 [.430] Plug
(Pages 23 and 24)
18.75 [.738] Plug
(Page 29)
9.00 [.354] Plug
(Pages 21 and 22)
6.60 [.260] Plug
(Pages 19 and 20)
21.60
[.850]
20.00
[.785]
18.75
[.738]
18.00
[.709]
15.60
[.615]
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
Standard Receptacle
(Pages 36 and 37)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
22.86 [.900] Plug*
(Pages 32 and 33)
20.00 [.785] Plug*
(Pages 30 and 31)
18.75 [.738] Plug*
(Page 29)
17.96 [.707] Plug
(Pages 27 and 28)
22.86 [.900] Plug
(Pages 32 and 33)
31.90
[1.255]
29.00
[1.143]
27.80
[1.093]
27.00
[1.062]
22.86
[.900]
Standard Receptacle
(Pages 36 and 37)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
*This connector not available in Palladium Nickel.
17
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReRadight-Angle(Straddle Mount) Combinations
30 µ Gold & Palladium
Nickel Connections
Vertical Receptacle with
Right-Angle Plug
Vertical Plug with
Right-Angle Receptacle
Right-angle versions are
designed for paddlecard
Engineering to review their
applications as the potential
type applications. It is highly for tolerancing issues
recommended that cus- and/or issues of solder joint
tomers who are considering integrity can be highly
right-angle applications
contact Tyco Electronics
application specific.
18
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs
6.60 [.260]
Stacking Height*
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
Related Product Data
B
0.03
5.28
[.208
[
]
.001
]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
Position No. 1 Indicator
18 Spaces at
0.20
.008
]
0.64
[.025
D Spaces at
0.20
.008
]
= 11.43
[.450
0.20
12.70
[.500
*6.60 [.260] stack height when
mated to vertical receptacle;
15.62 [.615] stack height when
mated to vertical receptacle
(extended height).
.008
] = E
0.20
.008]
C
[
0.28
.011
6.53
[.257
]
Ground Bus
0.23
6.38
[.251
Housing
Contact
.009
]
8.72
[.343]
Max.
Standard Barbless
Ground Bus Leads
Ø 1.94
[.077]
F
Ref.
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 2
Pad
3.53
[.139]
0.05
.002
Ø 0.81
[.032
0.64
[.025]
Orientation Hole
]
(See Note)
Hole
Position No. 1
R 0.13 [.005]
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39 0.05 [.094 .002]; For slip-fit applications,
the orientation hole must be 2.00 0.03 [.079 .001].
19
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
6.60 [.260]
Stacking Height (Continued)
Part Numbers
Tube
Platings
Barbed G/B Leads
T&R
Barbless G/B Leads
Dimensions
No. of
Pos.
Solder
T&R
Vacuum Caps
A
B
C
D
E
F
Contact
Tail
Vacuum Caps
Tube
With
767111-8
Without
767111-1
With
767118-1
—
Without
767118-8
—
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
1.35 [.053]
Gold
PdNi
767007-8
767056-1
—
767116-1
2.72 [.107] SnPb
2.64 [.104]
1.35 [.053]
—
.
.
—
.
.
—
.
ⅷ
ⅷ
.
ⅷ
ⅷ
.
ⅷ
ⅷ
.
ⅷ
ⅷ
—
—
767117-1
767119-1
767119-8
5767118-8
—
25.40 22.81 11.43
1.000 .898 .450
38
0
—
ⅷ
ⅷ
Gold 5767007-8
5767111-8
5767111-1
5767116-1 5767118-1
2.72 [.107] Pb-free
2.64 [.104]
1.35 [.053]
5767056-1
—
.
.
—
.
.
—
.
ⅷ
—
.
ⅷ
ⅷ
.
ⅷ
ⅷ
PdNi
—
.
ⅷ
ⅷ
—
767111-9
—
—
767111-2
—
5767117-1 5767119-1
5767119-8
767118-9
—
ⅷ
ⅷ
ⅷ
Gold
767007-9
767056-2
—
767116-2
767118-2
—
2.72 [.107] SnPb
2.64 [.104]
1.35 [.053]
2.72 [.107] Pb-free
2.64 [.104]
1.35 [.053]
2.72 [.107] SnPb
2.64 [.104]
1.35 [.053]
2.72 [.107] Pb-free
2.64 [.104]
1.35 [.053]
2.72 [.107] SnPb
2.64 [.104]
1.35 [.053]
2.72 [.107] Pb-free
2.64 [.104]
1.35 [.053]
2.72 [.107] SnPb
2.64 [.104]
1.35 [.053]
2.72 [.107] Pb-free
2.64 [.104]
1.35 [.053]
2.72 [.107] SnPb
2.64 [.104]
1.35 [.053]
2.72 [.107] Pb-free
2.64 [.104]
1.35 [.053]
2.72 [.107] SnPb
2.64 [.104]
1.35 [.053]
2.72 [.107] Pb-free
2.64 [.104]
.
.
.
.
—
.
ⅷ
ⅷ
.
ⅷ
ⅷ
.
ⅷ
ⅷ
PdNi
.
—
—
767117-2
767119-2
767119-9
5767118-9
—
38.10 31.70 24.13
12.70
76
1
2
3
4
5
6
1.500 1.248 .950
.500
ⅷ
Gold 5767007-9 5767111-9
ࡗ
5767111-2ࡗ
5767116-2 5767118-2 ⅷ
5767056-2
—
—
.
.
—
.
.
—
.
ⅷ
—
.
ⅷ
ⅷ
.
ⅷ
ⅷ
PdNi
—
.
ⅷ
—
5767117-2 5767119-2
5767119-9
1-767118-0
—
ⅷ
ⅷ
ⅷ
Gold 1-767007-0 1-767111-0
767111-3
767116-3
—
767118-3
—
ⅷ
767056-3
—
—
—
.
.
—
.
.
.
ⅷ
ⅷ
.
ⅷ
ⅷ
.
ⅷ
ⅷ
PdNi
.
—
767117-3
767119-3
1-767119-0
50.80 48.21 36.83
2.000 1.898 1.450
25.40
1.000
114
152
190
228
266
ⅷ
Gold 1-5767007-0 1-5767111-0
5767111-3
5767116-3 5767118-3 1-5767118-0
ⅷ
5767056-3
—
—
.
.
—
.
.
—
.
ⅷ
—
.
ⅷ
—
.
ⅷ
ⅷ
PdNi
—
.
ⅷ
—
5767117-3 5767119-3 1-5767119-0
ⅷ
ⅷ
ⅷ
ⅷ
Gold 1-767007-1 1-767111-1
767111-4
767116-4
767118-4
1-767118-1
—
ⅷ
767056-4
—
—
—
.
.
—
.
.
—
.
ⅷ
ⅷ
—
.
ⅷ
ⅷ
.
ⅷ
ⅷ
PdNi
.
—
767117-4
767119-4
1-767119-1
63.50 60.91 49.53
2.500 2.398 1.950
38.10
1.500
ⅷ
Gold 1-5767007-1 1-5767111-1
5767111-4
5767116-4 5767118-4 1-5767118-1
ⅷ
5767056-4
—
—
.
.
—
.
.
—
.
ⅷ
—
.
ⅷ
—
.
ⅷ
ⅷ
PdNi
—
.
ⅷ
—
5767117-4 5767119-4 1-5767119-1
ⅷ
ⅷ
ⅷ
ⅷ
Gold 1-767007-2 1-767111-2
767111-5
767116-5
767118-5
1-767118-2
—
ⅷ
767056-5
—
—
—
.
.
—
.
.
—
.
ⅷ
ⅷ
—
.
ⅷ
ⅷ
.
ⅷ
ⅷ
PdNi
.
—
767117-5
767119-5
1-767119-2
76.20 73.61 62.23
3.000 2.898 2.450
50.80
2.000
ⅷ
Gold 1-5767007-2 1-5767111-2
5767111-5
5767116-5 5767118-5 1-5767118-2
ⅷ
5767056-5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
.
.
.
.
.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
.
.
.
.
.
—
.
ⅷ
—
.
ⅷ
—
.
PdNi
ⅷ
—
.
ⅷ
ⅷ
5767117-5 5767119-5 1-5767119-2
ⅷ
Gold 1-767007-3
767116-6
—
—
—
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
.
.
.
—
—
—
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
.
.
.
767056-6
—
.
ⅷ
ⅷ
PdNi
—
.
ⅷ
ⅷ
767117-6
5767116-6
—
88.90 86.31 74.93
3.500 3.398 2.950
63.50
2.500
Gold 1-5767007-3
5767056-6
.
ⅷ
ⅷ
PdNi
—
.
ⅷ
ⅷ
5767117-6
767116-7
—
Gold 1-767007-4
767056-7
.
ⅷ
ⅷ
PdNi
—
.
ⅷ
ⅷ
767117-7
5767116-7
—
101.60 99.01 87.63
4.000 3.898 3.450
76.20
3.000
Gold 1-5767007-4
5767056-7
.
ⅷ
PdNi
—
.
5767117-7
Notes: 1. Contact Product Engineering regarding options not present in this table.
2. T&R vacuum caps are placed on some connectors to allow them to be picked up with robotic placement equipment that uses vacuum pick-up
nozzles.
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
20
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
9.00 [.354]
Stacking Height*
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
Related Product Data
B
0.03
.001
]
5.28
[.208
[
]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
Position No. 1 Indicator
18 Spaces at
0.20
.008
]
0.64
[.025
D Spaces at
0.20
.008
]
= 11.43
[.450
0.20
* 9.00 [.354] stack height when
mated to vertical receptacle;
18.00 [.709] stack height when
mated to vertical receptacle
(extended height).
12.70
[.500
.008
] = E
0.20
.008]
C
[
0.28
.011
8.86
[.349
]
Ground Bus
0.20
Housing
Contact
8.71
[.343
.008
]
8.33
[.328]
Max.
Standard Ground
Bus Leads
Ø 1.94
[.077]
F
Ref.
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 2
Pad
3.53
[.139]
0.05
.002
Ø 0.81
[.032
0.64
[.025]
Orientation Hole
]
(See Note)
Hole
Position No. 1
R 0.13 [.005]
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39 0.05 [.094 .002]; For slip-fit applications,
the orientation hole must be 2.00 0.03 [.079 .001].
21
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
9.00 [.354]
Stacking Height (Continued)
Part Numbers
Barbed G/B Leads
Tube
Platings
Dimensions
No. of
Pos.
Solder
Tail
A
B
C
D
E
F
Contact
ⅷ
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
1.52 [.060]
2.74 [.108]
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
767139-1
SnPb
Pb-free
SnPb
ⅷ
767140-1
25.40
1.000
22.81
.898
11.43
.450
38
0
—
5767139-1
5767140-1
ⅷ
767139-2
ⅷ
767140-2
38.10
31.70
24.13
12.70
76
1
2
3
4
5
6
1.500
1.248
.950
.500
5767139-2
5767140-2
Pb-free
SnPb
ⅷ
767139-3
ⅷ
767140-3
50.80
2.000
48.21
1.898
36.83
1.450
25.40
1.000
114
152
190
228
266
5767139-3
5767140-3
Pb-free
SnPb
ⅷ
767139-4
ⅷ
767140-4
63.50
2.500
60.91
2.398
49.53
1.950
38.10
1.500
5767139-4
5767140-4
Pb-free
SnPb
ⅷ
767139-5
ⅷ
767140-5
76.20
3.000
73.61
2.898
62.23
2.450
50.80
2.000
5767139-5
5767140-5
Pb-free
SnPb
ⅷ
767139-6
ⅷ
767140-6
88.90
3.500
86.31
3.398
74.93
2.950
63.50
2.500
5767139-6
5767140-6
Pb-free
SnPb
ⅷ
767139-7
ⅷ
767140-7
101.60
4.000
99.01
3.898
87.63
3.450
76.20
3.000
5767139-7
5767140-7
Pb-free
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
22
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
11.00 [.430]
Stacking Height*
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
Related Product Data
B
0.03
5.28
[.208
[
]
.001
]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
Position No. 1 Indicator
18 Spaces at
0.20
.008
]
0.64
[.025
D Spaces at
0.20
.008
]
= 11.43
[.450
0.20
12.70
[.500
.008
] = E
* 11.00 [.430] stack height when
mated to vertical receptacle;
19.94 [.785] stack height when
mated to vertical receptacle
(extended height).
0.20
.008]
C
[
0.28
.011
]
10.79
[.425
Ground Bus
Housing
0.20
.008
]
10.64
[.419
Contact
8.72
[.343]
Max.
Standard Ground
Bus Leads
Ø 1.94
[.077]
F
Ref.
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 2
Pad
3.53
[.139]
0.05
.002
Ø 0.81
[.032
0.64
[.025]
Orientation Hole
]
(See Note)
Hole
Position No. 1
R 0.13 [.005]
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39 0.05 [.094 .002]; For slip-fit applications,
the orientation hole must be 2.00 0.03 [.079 .001].
23
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
11.00 [.430]
Stacking Height (Continued)
Part Numbers
Platings
Barbed G/B Leads
T&R
Vacuum Caps
With Without
Barbless G/B Leads
T&R
Tube
Dimensions
No. of
Pos.
Solder
A
B
C
D
E
F
Contact
Tail
Vacuum Caps
Tube
With
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [(.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
Gold
767003-9
767087-1
767123-8
767123-1
—
—
SnPb
Pb-free
SnPb
PdNi
—
5767123-8
—
—
—
—
25.40 22.81 11.43
1.000 .898 .450
38
0
—
Gold
5767003-9
5767087-1
1-767003-0
767087-2
5767123-1
—
—
PdNi
—
—
—
Gold
767123-9
—
767123-2
—
—
PdNi
—
—
—
38.10 31.70 24.13
1.500 1.248 .950
12.70
.500
76
1
2
3
4
5
6
ⅷ
ⅷ
ⅷ
ⅷ
Gold 1-5767003-0
5767123-9
—
5767123-2
—
—
Pb-free
SnPb
PdNi
Gold
PdNi
5767087-2
1-767003-1
—
—
1-767182-3
—
—
1-767183-0
—
ⅷ
ⅷ
1-767123-0
—
767123-3
767087-3
—
50.80 48.21 36.83
2.000 1.898 1.450
25.40
1.000
114
152
190
228
266
ⅷ
ⅷ
ⅷ
ⅷ
Gold 1-5767003-1 1-5767123-0
5767123-3
1-5767182-3 1-5767183-0
Pb-free
SnPb
ⅷ
PdNi
Gold
PdNi
Gold
PdNi
Gold
PdNi
5767087-3
767003-8
767087-4
5767003-8
5767087-4
1-767003-2
767087-5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
—
—
—
—
63.50 60.91 49.53
2.500 2.398 1.950
38.10
1.500
—
—
Pb-free
SnPb
—
1-767123-2
—
—
ⅷ
ⅷ
ⅷ
767123-5
—
76.20 73.61 62.23
3.000 2.898 2.450
50.80
2.000
ⅷ
ⅷ
Gold 1-5767003-2 1-5767123-2
5767123-5
Pb-free
SnPb
ⅷ
PdNi
5767087-5
1-767003-3
767087-6
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ⅷ
ⅷ
Gold
PdNi
88.90 86.31 74.93
3.500 3.398 2.950
63.50
2.500
ⅷ
ⅷ
ⅷ
ⅷ
Gold 1-5767003-3
Pb-free
SnPb
PdNi
Gold
PdNi
5767087-6
1-767003-4
767087-7
101.60 99.01 87.63
4.000 3.898 3.450
76.20
3.000
ⅷ
Gold 1-5767003-4
PdNi 5767087-7
Pb-free
ⅷ
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
24
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
12.57 [.495]
Stacking Height*
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
Related Product Data
B
0.03
5.28
[.208
[
]
.001
]
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
Position No. 1 Indicator
18 Spaces at
0.20
.008
]
0.64
[.025
D Spaces at
0.20
.008
]
= 11.43
[.450
0.20
12.70
[.500
.008
] = E
* 12.57 [.495] stack height when
mated to vertical receptacle;
21.59 [.850] stack height when
mated to vertical receptacle
(extended height).
0.20
.008]
C
[
0.28
.011
]
12.45
[.490
Ground Bus
0.20
.008
]
12.29
[.484
Housing
Contact
8.72
[.343]
Max.
Standard Ground
Bus Leads
Ø 1.94
[.077]
F
Ref.
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 2
Pad
3.53
[.139]
0.05
.002
Ø 0.81
[.032
0.64
[.025]
Orientation Hole
]
(See Note)
Hole
Position No. 1
R 0.13 [.005]
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39 0.05 [.094 .002]; For slip-fit applications,
the orientation hole must be 2.00 0.03 [.079 .001].
25
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
12.57 [.495]
Stacking Height (Continued)
Part Numbers
Tube
Platings
Barbed G/B Leads
T&R
Barbless G/B Leads
Dimensions
No. of
Pos.
Solder
T&R
Vacuum Caps
A
B
C
D
E
F
Contact
Tail
Vacuum Caps
Tube
With
767149-1
—
Without
767149-8
—
With
767121-1
—
Without
767121-8
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
1.52 [.060]
2.64 [.104]
Gold
PdNi
767005-8
767120-1
SnPb
Pb-free
SnPb
767057-1
.
.
ⅷ
767082-1
.
—
5767121-8
—
.
ⅷ
25.40 22.81 11.43
1.000 .898 .450
38
0
—
ⅷ
ⅷ
Gold 5767005-8
PdNi 5767057-1
5767149-1
5767149-8 5767120-1 5767121-1
ⅷ
—
.
—
. 5767082-1
ⅷ
—
.
.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Gold
PdNi
767005-9
767057-2
767149-2
767149-9
—
767120-2
767082-2
767121-2
—
767121-9
—
—
.
.
ⅷ
.
.
ⅷ
38.10 31.70 24.13
1.500 1.248 .950
12.70
.500
76
1
2
3
4
5
6
ⅷ
ⅷ
Gold 5767005-9
PdNi 5767057-2
Gold 1-767005-0
5767149-2
5767149-9 5767120-2 5767121-2
5767121-9
Pb-free
SnPb
ⅷ
—
.
—
1-767149-0
—
. 5767082-2
ⅷ
—
.
—
.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
767149-3
767120-3
767082-3
767121-3
—
1-767121-0
PdNi
767057-3
—
.
.
ⅷ
.
—
.
ⅷ
50.80 48.21 36.83
2.000 1.898 1.450
25.40
1.000
114
152
190
228
266
ⅷ
ⅷ
Gold 1-5767005-0
PdNi 5767057-3
Gold 1-767005-1
5767149-3 1-5767149-0 5767120-3 5767121-3 1-5767121-0
Pb-free
SnPb
ⅷ
—
.
—
1-767149-1
—
. 5767082-3
ⅷ
—
.
ⅷ
ⅷ
ⅷ
—
.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
767149-4
—
767120-4
767121-4
767127-4
1-767121-1
1-767127-1
PdNi
767057-4
.
.
ⅷ
767082-4
63.50 60.91 49.53
2.500 2.398 1.950
38.10
1.500
ⅷ
Gold 1-5767005-1
PdNi 5767057-4
Gold 1-767005-2
5767149-4 1-5767149-1 5767120-4 5767121-4 1-5767121-1
Pb-free
SnPb
ⅷ
ⅷ
—
.
—
1-767149-2
—
. 5767082-4 5767127-4 1-5767127-1
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
767149-5
767120-5
—
.
—
1-767121-2
—
.
ⅷ
ⅷ
PdNi
767057-5
—
.
.
ⅷ
767082-5
767127-5
76.20 73.61 62.23
3.000 2.898 2.450
50.80
2.000
ⅷ
Gold 1-5767005-2
PdNi 5767057-5
Gold 1-767005-3
5767149-5 1-5767149-2 5767120-5
—
.
.
ⅷ
Pb-free
SnPb
ⅷ
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
—
. 5767082-5 5767127-5 1-5767121-2
ⅷ
—
.
.
767120-6
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
PdNi
767057-6
—
767082-6
88.90 86.31 74.93
3.500 3.398 2.950
63.50
2.500
Gold 1-5767005-3
PdNi 5767057-6
Gold 1-767005-4
—
. 5767120-6
. 5767082-6
Pb-free
SnPb
—
—
1-767151-4
—
.
ⅷ
767120-7
767082-7
PdNi
767057-7
101.60 99.01 87.63
4.000 3.898 3.450
76.20
3.000
Gold 1-5767005-4
PdNi 5767057-7
. 5767120-7
ⅷ
Pb-free
. 1-5767151-4 5767082-7
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
26
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
17.96 [.707]
Stacking Height*
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
0.03
.001
5.28
[.208
Related Product Data
B
]
[
]
Material and Finish — page 16
Performance Characteristics —
page 16
8.13
[.320]
Mating Receptacles — pages 36-41
Technical Documents — page 81
18 Spaces at
Position No. 1 Indicator
0.15
.006
]
0.64
[.025
D Spaces at
0.15
.006
]
= 11.43
[.450
0.15
12.70
[.500
* 17.96 [.707] stack height when
mated to vertical receptacle;
27.00 [1.062] stack height when
mated to vertical receptacle
(extended height).
.006
] = E
0.15
.006]
C
[
Ground Bus
Plug
Housing
0.28
.011
]
17.75
[.699
14.71
[.579]
Ref.
Extension
Housing
Contact
Standard Ground
Bus Leads
1.32
[.052]
1.35
[.053]
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 2
Pad
3.53
[.139]
0.05
.002
Ø 0.81
[.032
0.64
[.025]
0.05
.002
2.39
[.094
]
]
Hole
Orientation Hole
Position No. 1
R 0.13 [.005]
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98 0.03 [.078 .001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
27
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
www.tycoelectronics.com
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
17.96 [.707]
Stacking Height (Continued)
Dimensions
C
No. of
Pos.
Plating
Part Numbers
A
B
D
E
ⅷ
SnPb
Pb-free
SnPb
767025-1
25.40
22.81
11.43
0.00
38
0
1.000
.898
.450
.000
5767025-1
ⅷ
767025-2
38.10
1.500
35.51
1.398
24.13
.950
12.70
.500
76
1
2
3
4
5
6
Pb-free
SnPb
5767025-2
ⅷ
767025-3
50.80
2.000
48.21
1.898
36.83
1.450
25.40
1.000
114
152
190
228
266
Pb-free
SnPb
5767025-3
ⅷ
767025-4
63.50
2.500
60.91
2.398
49.53
1.950
38.10
1.500
Pb-free
SnPb
5767025-4
ⅷ
767025-5
76.20
3.000
73.61
2.898
62.23
2.450
50.80
2.000
Pb-free
SnPb
5767025-5
ⅷ
767025-6
88.90
3.500
86.31
3.398
74.93
2.950
63.50
2.500
Pb-free
SnPb
5767025-6
ⅷ
767025-7
101.60
4.000
99.00
3.898
87.63
3.450
76.20
3.000
Pb-free
5767025-7
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
28
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MPaICgeT_OHReVaedrticalPlugs (Continued)
18.75 [.738]
Stacking Height*
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
0.03
.001
5.28
[.208
Related Product Data
B
]
[
]
Material and Finish — page 16
Performance Characteristics —
page 16
8.13
[.320]
Mating Receptacles — pages 36-41
Technical Documents — page 81
18 Spaces at
Position No. 1 Indicator
0.15
.006
]
0.64
[.025
D Spaces at
0.15
.006
]
= 11.43
[.450
0.15
12.70
[.500
* 18.75 [.738] stack height when
mated to vertical receptacle;
27.80 [1.093] stack height when
mated to vertical receptacle
(extended height).
.006
] = E
0.15
.006]
C
[
Ground Bus
Plug
Housing
0.28
.011
]
18.47
[.727
15.49
[.610]
Ref.
Extension
Housing
Contact
8.72
[.343]
Max.
Standard Ground
Bus Leads
1.45
[.057]
1.32
[.052]
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 2
Pad
3.53
[.139]
0.05
.002
Ø 0.81
[.032
0.64
[.025]
0.05
.002
2.39
[.094
]
]
Hole
Orientation Hole
Position No. 1
R 0.13 [.005]
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Connector Side of Board Shown)
Dimensions
No. of
Pos.
Plating
Part Numbers
A
B
C
D
E
ⅷ
SnPb
Pb-free
SnPb
767042-1
25.40
22.81
11.43
0.00
38
0
1.000
.898
.450
.000
5767042-1
ⅷ
767042-2
38.10
1.500
35.51
1.398
24.13
.950
12.70
.500
76
1
2
3
4
5
6
Pb-free
SnPb
5767042-2
ⅷ
767042-3
50.80
2.000
48.21
1.898
36.83
1.450
25.40
1.000
114
152
190
228
266
Pb-free
SnPb
5767042-3
ⅷ
767042-4
63.50
2.500
60.91
2.398
49.53
1.950
38.10
1.500
Pb-free
SnPb
5767042-4
ⅷ
767042-5
76.20
3.000
73.61
2.898
62.23
2.450
50.80
2.000
Pb-free
SnPb
5767042-5
ⅷ
767042-6
88.90
3.500
86.31
3.398
74.93
2.950
63.50
2.500
Pb-free
SnPb
5767042-6
ⅷ
767042-7
101.60
4.000
99.00
3.898
87.63
3.450
76.20
3.000
Pb-free
5767042-7
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
29
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
20.00 [.785]
Stacking Height*
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
0.03
.001
5.28
[.208
Related Product Data
B
]
[
]
Material and Finish — page 16
Performance Characteristics —
page 16
8.13
[.320]
Mating Receptacles — pages 36-41
Technical Documents — page 81
18 Spaces at
Position No. 1 Indicator
0.15
.006
]
0.64
[.025
D Spaces at
0.15
.006
]
= 11.43
[.450
0.15
12.70
[.500
* 20.02 [.788] stack height when
mated to vertical receptacle;
29.00 [1.143] stack height when
mated to vertical receptacle
(extended height).
.006
] = E
0.15
.006]
C
[
Ground Bus
Plug
Housing
0.28
.011
]
19.81
[.780
16.76
[.660]
Ref.
Extension
Housing
Contact
Standard Ground
Bus Leads
1.32
[.052]
1.35
[.053]
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 2
Pad
3.53
[.139]
0.05
.002
Ø 0.81
[.032
0.64
[.025]
0.05
.002
2.39
[.094
]
]
Hole
Orientation Hole
Position No. 1
R 0.13 [.005]
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98 0.03 [.078 .001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
30
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
www.tycoelectronics.com
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
20.00 [.785]
Stacking Height (Continued)
Dimensions
C
No. of
Pos.
Plating
Part Numbers
A
B
D
E
ⅷ
SnPb
Pb-free
SnPb
767032-1
25.40
22.81
11.43
0.00
38
0
1.000
.898
.450
.000
5767032-1
ⅷ
767032-2
38.10
1.500
35.51
1.398
24.13
.950
12.70
.500
76
1
2
3
4
5
6
Pb-free
SnPb
5767032-2
ⅷ
767032-3
50.80
2.000
48.21
1.898
36.83
1.450
25.40
1.000
114
152
190
228
266
Pb-free
SnPb
5767032-3
ⅷ
767032-4
63.50
2.500
60.91
2.398
49.53
1.950
38.10
1.500
Pb-free
SnPb
5767032-4
ⅷ
767032-5
76.20
3.000
73.61
2.898
62.23
2.450
50.80
2.000
Pb-free
SnPb
5767032-5
ⅷ
767032-6
88.90
3.500
86.31
3.398
74.93
2.950
63.50
2.500
Pb-free
SnPb
5767032-6
ⅷ
767032-7
101.60
4.000
99.00
3.898
87.63
3.450
76.20
3.000
Pb-free
5767032-7
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
31
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
22.86 [.900]
Stacking Height*
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
0.03
.001
5.28
[.208
Related Product Data
B
]
[
]
Material and Finish — page 16
Performance Characteristics —
page 16
8.13
[.320]
Mating Receptacles — pages 36-41
Technical Documents — page 81
18 Spaces at
Position No. 1 Indicator
0.15
.006
]
0.64
[.025
D Spaces at
0.15
.006
]
= 11.43
[.450
0.15
12.70
[.500
* 22.86 [.900] stack height when
mated to vertical receptacle;
31.90 [1.255] stack height when
mated to vertical receptacle
(extended height).
.006
] = E
0.15
.006]
C
[
Ground Bus
Plug
Housing
0.28
.011
]
22.66
[.892
19.61
[.772]
Ref.
Extension
Housing
Contact
Standard Ground
Bus Leads
1.32
[.052]
1.35
[.053]
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 2
Pad
3.53
[.139]
0.05
.002
Ø 0.81
[.032
0.64
[.025]
0.05
.002
2.39
[.094
]
]
Hole
Orientation Hole
Position No. 1
R 0.13 [.005]
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98 0.03 [.078 .001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
32
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
www.tycoelectronics.com
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
22.86 [.900]
Stacking Height (Continued)
Dimensions
C
No. of
Pos.
Plating
Part Numbers
A
B
D
E
ⅷ
SnPb
Pb-free
SnPb
767017-1
25.40
22.81
11.43
0.00
38
0
1.000
.898
.450
.000
5767017-1
ⅷ
767017-2
38.10
1.500
35.51
1.398
24.13
.950
12.70
.500
76
1
2
3
4
5
6
Pb-free
SnPb
5767017-2
ⅷ
767017-3
50.80
2.000
48.21
1.898
36.83
1.450
25.40
1.000
114
152
190
228
266
Pb-free
SnPb
5767017-3
ⅷ
767017-4
63.50
2.500
60.91
2.398
49.53
1.950
38.10
1.500
Pb-free
SnPb
5767017-4
ⅷ
767017-5
76.20
3.000
73.61
2.898
62.23
2.450
50.80
2.000
Pb-free
SnPb
5767017-5
ⅷ
767017-6
88.90
3.500
86.31
3.398
74.93
2.950
63.50
2.500
Pb-free
SnPb
5767017-6
ⅷ
767017-7
101.60
4.000
99.00
3.898
87.63
3.450
76.20
3.000
Pb-free
5767017-7
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
33
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Right-Angle Plugs
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
0.20
A
[
.008]
+ 0.00
– 0.05
+ .000
– .002
B
0.03
5.28
[.208
Mating Receptacles — pages 36-41
Technical Documents — page 81
[
]
.001
]
Position No. 1 Indicator
Ground Bus
3.53
[.139]
Max.
Housing
0.23
6.38
[.251
.009
]
Contact
.018
.007
1.50
[.059
18 Spaces at
]
F
0.20
.008
]
.008
]
0.64
[.025
D Spaces at
0.20
= 11.43
[.450
0.20
12.70
.008
] = E
0.20
.008]
[.500
C
[
C Ref.
0.05
.002
Ø 1.02
[.040
4.80
[.189]
Hole
4 Spaces at
2.54 [.100]
= 10.16 [.400]
+ 0.05
– 0.02
+ .002
]
0.36
0.81
[.032]
[.014
]
Pad
– .001
2.59
[.102]
0.05
2.41
[.095
Orientation Hole
3.73
[.147]
0.64
[.025]
.002
]
1.78
[.070]
0.05
.002
0.43
[.017
]
Position No. 1
This Side
R 0.13 [.005]
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Mirror Image on Opposite Side)
34
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Right-Angle Plugs (Continued)
Platings
Dimensions
Part Numbers
Tube
No. of
Pos.
Solder
A
B
C
D
E
F
Contact
Tail
ⅷ
SnPb
767006-1
Gold
Pb-free
SnPb
5767006-1
1.52
.060
ⅷ
767055-1
25.40
22.81
11.43
0.00
38
76
0
PdNi
PdNi
Gold
PdNi
PdNi
PdNi
Gold
PdNi
PdNi
Gold
PdNi
PdNi
Gold
PdNi
PdNi
Gold
PdNi
PdNi
Gold
PdNi
PdNi
1.000
.898
.450
.000
Pb-free
SnPb
5767055-1
ⅷ
767039-1
2.31
.091
Pb-free
SnPb
5767039-1
ⅷ
767006-2
Pb-free
SnPb
5767006-2
1.52
.060
ⅷ
767055-2
Pb-free
SnPb
5767055-2
38.10
1.500
35.51
1.398
24.13
.950
12.70
.500
1
ⅷ
767039-2
2.31
.091
Pb-free
SnPb
5767039-2
ⅷ
767170-2
2.97
.117
Pb-free
SnPb
5767170-2
ⅷ
767006-3
Pb-free
SnPb
5767006-3
1.52
.060
ⅷ
767055-3
50.80
2.000
48.21
1.898
36.83
1.450
25.40
1.000
114
152
190
228
266
2
3
4
5
6
Pb-free
SnPb
5767055-3
ⅷ
767039-3
2.31
.091
Pb-free
SnPb
5767039-3
ⅷ
767006-4
Pb-free
SnPb
5767006-4
1.52
.060
ⅷ
767055-4
63.50
2.500
60.91
2.398
49.53
1.950
38.10
1.500
Pb-free
SnPb
5767055-4
ⅷ
767039-4
2.31
.091
Pb-free
SnPb
5767039-4
ⅷ
767006-5
Pb-free
SnPb
5767006-5
1.52
.060
ⅷ
767055-5
76.20
3.000
73.61
2.898
62.23
2.450
50.80
2.000
Pb-free
SnPb
5767055-5
ⅷ
767039-5
2.31
.091
Pb-free
SnPb
5767039-5
ⅷ
767006-6
Pb-free
SnPb
5767006-6
1.52
.060
ⅷ
767055-6
88.90
3.500
86.31
3.398
74.93
2.950
63.50
2.500
Pb-free
SnPb
5767055-6
ⅷ
767039-6
2.31
.091
Pb-free
SnPb
5767039-6
ⅷ
767006-7
Pb-free
SnPb
5767006-7
1.52
.060
ⅷ
767055-7
101.60
4.000
99.00
3.898
87.63
3.450
76.20
3.000
Pb-free
SnPb
5767055-7
ⅷ
767039-7
2.31
.091
Pb-free
5767039-7
S = Printed circuit board thickness connector is intended to be used on.
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
35
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Receptacles
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
A
+ 0.08
– 0.00
Position No. 1 Indicator
B
+ .003
0.06
.002
5.38
[.212
[
]
– .000
Mating Plugs — pages 19-35
Technical Documents — page 81
]
6.91
[.272]
18 Spaces at
0.20
.008
]
.008
0.64
[.025
D Spaces at
0.20
= 11.43
[.450
]
0.20
12.70
.008
] = E
0.20
.008]
[.500
C
[
0.25
.010
6.10
[.240
]
Ground Bus
Contact
Housing
0.15
.006
5.99
[.236
]
0.15
1.35
[.053
0.18
[.007]
6.43
[.253]
Ref.
2.69
[.106]
.006
]
Standard Ground
Bus Leads
0.15
.006]
F
8.72
[.343]
Max.
[
Ø 1.94
2.26
Ref.
[.077]
[.089]
2.26
[.089]
2.74
[.108]
2.74
[.108]
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 1
Pad
3.53
[.139]
0.05
.002
0.64
[.025]
Ø 0.81
[.032
Orientation Hole
(See Note)
]
Dia. Typ. For
Barbed Parts;
Position No. 2
0.05
R 0.13 [.005]
Ø 0.64
[.025
.002
or
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
]
0.13 [.005] x 45°
Dia. Typ. For
Barbless Parts
Recommended PC Board Layout
(Connector Side of Board Shown)
Note: For standard applications, orientation hole to be Ø 2.39 0.05 [.094 .002]; For slip-fit applications,
orientation hole to be Ø 2.00 0.03 [.079 .001].
36
Catalog 65194
Revised 6-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Receptacles (Continued)
Part Numbers
Tube
Platings
Barbed G/B Leads
T&R
Barbless G/B Leads
Dimensions
No. of
Pos.
Solder
T&R
Vacuum Caps
A
B
C
D
E
F
Contact
Tail
Vacuum Caps
Tube
With
767096-8
—
Without
767096-1
With
767114-1
—
Without
767114-8
ⅷ
ⅷ
ⅷ
ⅷ
.
ⅷ
ⅷ
ⅷ
.
Gold
PdNi
2-767004-2
767110-1
1.40
SnPb
SnPb
.055
767181-1
.
—
—
—
.
.
—
—
2.74
.108
.
.
ⅷ
ⅷ
ⅷ
ⅷ
PdNi
767054-1
767171-1
767081-1
767115-1
25.40 22.86 11.43
1.000 .900 .450
38
0
—
1.40
.055
ⅷ
Pb-free Gold
2-5767004-2ⅷ
5767096-8ⅷ 5767096-1ⅷ 5767110-1ⅷ 5767114-1ⅷ 5767114-8
ⅷ
Gold
Pb-free
5767181-1
—
.
ⅷ
ⅷ
—
—
.
—
.
ⅷ
—
.
ⅷ
ⅷ
—
—
.
.
2.74
.108
ⅷ
PdNi
5767054-1
5767171-1
767096-9
—
. 5767081-1 5767115-1
ⅷ
ⅷ
ⅷ
ⅷ
Gold
SnPb
2-767004-3
767096-2
—
767110-2
—
767114-2
—
767114-9
—
1.40
.055
ⅷ
PdNi
767181-2
.
.
.
.
.
.
.
.
2.74
.108
ⅷ
ⅷ
ⅷ
SnPb
PdNi
767054-2
—
—
767081-2
767115-2
—
38.10 35.56 24.13
12.70
76
1
2
3
4
5
6
1.500 1.400 .950
.500
1.40
.055
Pb-free Gold
2-5767004-3ⅷ
5767096-9ⅷ 5767096-2ⅷ 5767110-2ⅷ 5767114-2ⅷ 5767114-9ⅷ
ⅷ
Gold
Pb-free
5767181-2
—
.
.
—
—
.
—
.
ⅷ
—
.
ⅷ
ⅷ
—
.
.
2.74
.108
ⅷ
PdNi
5767054-2
—
1-767096-0
—
. 5767081-2 5767115-2
ⅷ
—
1-767114-0
—
ⅷ
ⅷ
ⅷ
ⅷ
Gold
SnPb
2-767004-4
767096-3
—
767110-3
—
767114-3
—
1.40
.055
ⅷ
PdNi
767181-3
.
.
.
.
.
.
.
.
2.74
.108
ⅷ
ⅷ
ⅷ
SnPb
PdNi
767054-3
—
—
767081-3
767115-3
—
50.80 48.26 36.83
2.000 1.900 1.450
25.40
1.000
114
152
190
228
266
1.40
.055
Pb-free Gold
2-5767004-4ⅷ 1-5767096-0ⅷ 5767096-3ⅷ 5767110-3ⅷ 5767114-3ⅷ 1-5767114-0ⅷ
ⅷ
Gold
Pb-free
5767181-3
5767054-3
2-767004-5
767181-4
—
.
.
—
—
.
—
.
ⅷ
—
.
ⅷ
ⅷ
—
.
.
2.74
.108
ⅷ
ⅷ
ⅷ
PdNi
—
1-767096-1
—
. 5767081-3 5767115-3
ⅷ
—
1-767114-1
—
ⅷ
ⅷ
ⅷ
Gold
SnPb
767096-4
767110-4
767114-4
—
1.40
.055
PdNi
.
.
—
.
.
—
.
.
.
.
2.74
.108
ⅷ
ⅷ
ⅷ
SnPb
PdNi
767054-4
—
—
767081-4
767115-4
—
63.50 60.96 49.53
2.500 2.400 1.950
38.10
1.500
1.40
.055
Pb-free Gold
2-5767004-5ⅷ 1-5767096-1ⅷ 5767096-4ⅷ 5767110-4ⅷ 5767114-4ⅷ 1-5767114-1ⅷ
ⅷ
Gold
Pb-free
5767181-4
5767054-4
2-767004-6
767181-5
—
.
.
—
—
.
—
.
ⅷ
—
.
ⅷ
ⅷ
—
.
.
2.74
.108
ⅷ
ⅷ
ⅷ
PdNi
—
1-767096-2
—
. 5767081-4 5767115-4
ⅷ
—
1-767114-2
—
ⅷ
ⅷ
ⅷ
Gold
SnPb
767096-5
767110-5
767114-5
—
1.40
.055
PdNi
.
.
—
.
.
—
.
.
.
.
2.74
.108
ⅷ
ⅷ
ⅷ
SnPb
PdNi
Gold
767054-5
—
—
767081-5
767115-5
—
76.20 73.66 62.23
3.000 2.900 2.450
50.80
2.000
1.40
.055
2-5767004-6ⅷ 1-5767096-2ⅷ 5767096-5ⅷ 5767110-5ⅷ 5767114-5ⅷ 1-5767114-2ⅷ
Pb-free
Pb-free
ⅷ
Gold
PdNi
Gold
PdNi
5767181-5
5767054-5
2-767004-7
767181-6
—
.
.
—
—
—
—
.
—
.
ⅷ
—
.
ⅷ
—
—
—
—
.
.
.
.
2.74
.108
ⅷ
ⅷ
ⅷ
—
1-767096-3
—
. 5767081-5 5767115-5
ⅷ
ⅷ
.
.
767110-6
—
—
—
.
.
1.40
.055
SnPb
SnPb
.
.
.
2.74
.108
ⅷ
ⅷ
PdNi
767054-6
—
—
—
—
.
767081-6
—
—
.
.
—
—
.
.
88.90 86.36 74.93
3.500 3.400 2.950
63.50
2.500
1.40
.055
Pb-free Gold
2-5767004-7ⅷ
.
. 5767110-6ⅷ
ⅷ
Gold
Pb-free
5767181-6
—
—
—
—
.
.
.
.
—
—
—
—
.
—
.
ⅷ
ⅷ
—
—
—
—
.
.
.
.
—
—
—
—
.
.
.
.
2.74
.108
ⅷ
PdNi
5767054-6
. 5767081-6
ⅷ
Gold
SnPb
2-767004-8
.
.
767110-7
—
1.40
.055
ⅷ
PdNi
767181-7
.
2.74
ⅷ
ⅷ
SnPb
PdNi
767054-7
—
—
.
.
—
—
.
767081-7
—
—
.
.
—
—
.
.
.108
101.60 99.06 87.63
4.000 3.900 3.450
76.20
3.000
1.40
.055
Pb-free Gold
2-5767004-8ⅷ
. 5767110-7ⅷ
ⅷ
Gold
Pb-free
5767181-7
—
—
.
.
—
—
.
—
.
—
—
.
.
—
—
.
.
2.74
.108
ⅷ
PdNi
5767054-7
. 5767081-7
ࡗ
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
37
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Receptacles (Extended Height)
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
A
+ 0.08
– 0.00
B
+ .003
Position No. 1 Indicator
[
]
– .000
Mating Plugs — pages 19-35
Technical Documents — page 81
0.06
5.38
[.212
6.91 8.00
[.272] [.315]
.002
]
18 Spaces at
0.20
.008
]
.008
]
0.64
[.025
D Spaces at
0.20
= 11.43
[.450
0.20
12.70
[.500
.008
] = E
0.20
.008]
C
0.25
.010
]
15.01
[.591
[
Ground Bus
Contact
Housing
0.15
.006
14.91
[.587
]
8.72
[.343]
Max.
0.15
.006]
Standard Ground
Bus Leads
F
Ø 1.94
Ref.
[
[.077]
0.05
.002
0.43
[.017
]
C Ref.
6.35
[.250]
1.27
[.050]
4 Spaces at
2.54 [.100]
= 10.16 [.400]
Position No. 1
Pad
3.53
[.139]
0.05
.002
0.64
[.025]
Ø 0.81
[.032
Orientation Hole
]
Dia. Typ. For
Barbed Parts;
R 0.13 [.005]
0.05
Ø 0.64
[.025
or
.002
]
PC Board Hold Down Required
in This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
0.13 [.005] x 45°
Dia. Typ. For
Barbless Parts
Recommended PC Board Layout
(Connector Side of Board Shown)
38
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Receptacles (Extended Height) (Continued)
Part Numbers
Platings
Barbed G/B Leads
Barbless G/B Leads
T&R
Dimensions
No. of
Pos.
Solder
T&R
Vacuum Caps
A
B
C
D
E
F
Contact
Tail
Vacuum Caps
Tube
Tube
With
767146-1
767178-1
—
Without
With
—
Without
—
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
1.37 [.054]
1.37 [.054] SnPb
2.72 [.107]
1.37 [.054]
1.37 [.054] Pb-free
2.72 [.107]
1.37 [.054]
1.37 [.054] SnPb
2.72 [.107]
Gold
PdNi
767130-1
767094-1
767154-1
767146-8
767178-8
767153-8
—
—
767095-1
—
—
—
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
—
—
25.40 22.86 11.43
38
0
—
1.000 .900 .450
ⅷ
Gold 5767130-1 5767146-1
5767146-8
1761316-8
—
—
ⅷ
ⅷ
ⅷ
5767094-1 5767178-1
—
—
—
PdNi
ⅷ
ⅷ
5767154-1
767130-2
767094-2
767154-2
—
5767153-8 5767095-1
—
—
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Gold
PdNi
767146-2
767178-2
—
767146-9
—
—
—
—
—
767095-2
—
—
—
ⅷ
767153-9
—
—
38.10 35.56 24.13
1.500 1.400 .950
12.70
76
1
2
3
4
5
6
ⅷ
ⅷ
.500 1.37 [.054]
1.37 [.054] Pb-free
Gold 5767130-2 5767146-2
5767146-9
—
—
—
ⅷ
ⅷ
5767094-2 5767178-2
—
—
—
PdNi
ⅷ
ⅷ
2.72 [.107]
1.37 [.054]
1.37 [.054] SnPb
2.72 [.107]
1.37 [.054]
1.37 [.054] Pb-free
2.72 [.107]
1.37 [.054]
1.37 [.054] SnPb
2.72 [.107]
1.37 [.054]
1.37 [.054] Pb-free
2.72 [.107]
1.37 [.054]
1.37 [.054] SnPb
2.72 [.107]
1.37 [.054]
1.37 [.054] Pb-free
2.72 [.107]
1.37 [.054]
1.37 [.054] SnPb
2.72 [.107]
1.37 [.054]
5767154-2
767130-3
767094-3
767154-3
—
767146-3
—
5767153-9 5767095-2
—
—
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Gold
PdNi
1-767146-0
—
—
—
—
—
767095-3
—
—
767145-3
—
—
ⅷ
ⅷ
ⅷ
ⅷ
—
1-767153-0
1-767145-0
50.80 48.26 36.83
2.000 1.900 1.450
25.40
1.000
114
152
190
228
266
ⅷ
Gold 5767130-3 5767146-3 1-5767146-0
—
—
ⅷ
5767094-3
5767154-3
767130-4
767094-4
767154-4
—
—
—
—
PdNi
Gold
PdNi
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
—
767146-4
—
1-5767153-0 5767095-3 5767145-3 1-5767145-0
ⅷ
ⅷ
1-767146-1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
767095-4
—
—
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
—
1-767153-1
1-767145-1
63.50 60.96 49.53
2.500 2.400 1.950
38.10
1.500
Gold 5767130-4 5767146-4
ࡗ
1-5767146-1 —
ⅷ
5767094-4
5767154-4
767130-5
767094-5
767154-5
—
—
—
—
PdNi
Gold
PdNi
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
—
1-5767153-1 5767095-4
1-5767145-1
—
767178-5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
ⅷ
ⅷ
ⅷ
1-767178-2
—
767095-5
—
1-767153-2
—
76.20 73.66 62.23
3.000 2.900 2.450
50.80
2.000
Gold 5767130-5
—
ⅷ
ⅷ
5767094-5 5767178-5 1-1761316-2
—
PdNi
Gold
PdNi
ⅷ
ⅷ
5767154-5
767130-6
767094-6
767154-6
—
—
—
—
—
—
—
—
—
—
—
—
—
1-5767153-2 5767095-5
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
—
—
—
—
767095-6
—
ⅷ
ⅷ
1-767153-3
88.90 86.36 74.93
3.500 3.400 2.950
63.50
2.500
Gold 5767130-6
—
—
1.37 [.054] Pb-free
2.72 [.107]
1.37 [.054]
1.37 [.054] SnPb
2.72 [.107]
1.37 [.054]
5767094-6
PdNi
—
5767154-6
1-5767153-3 5767095-6
Gold
PdNi
767130-7
767094-7
767154-7
—
—
—
—
767095-7
—
ⅷ
1-767153-4
101.60 99.06 87.63
4.000 3.900 3.450
76.20
3.000
Gold 5767130-7
—
—
1.37 [.054] Pb-free
2.72 [.107]
5767094-7
PdNi
—
ⅷ
5767154-7
1-5767153-4 5767095-7
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except:
ࡗ
Indicates non-RoHS compliant; ⅷ
Indicates “5 of 6 compliant” (lead in solderable interface only).
39
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Right-Angle Receptacles
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
A
+ 0.08
– 0.00
Position No. 1 Indicator
B
+ .003
[
]
– .000
Mating Plugs — pages 19-35
Application Tooling — page 77
Technical Documents — page 81
6.91
[.272]
0.05
.002
5.38
[.212
]
Ground Bus
Contact
3.76
[.148]
Max.
Housing
0.15
5.99
[.236
.006
]
1.50
[.059]
18 Spaces at
F
0.20
.008
]
0.64
[.025
D Spaces at
0.20
.008
]
= 11.43
[.450
0.20
12.70
.008
] = E
0.20
.008]
[.500
C
[
C Ref.
0.05
.002
Ø 1.02
[.040
4.80
[.189]
Hole
4 Spaces at
2.54 [.100]
= 10.16 [.400]
+ 0.05
– 0.02
+ .002
]
0.36
0.81
[.032]
[.014
]
Pad
– .001
2.59
[.102]
0.05
2.41
[.095
Orientation Hole
3.73
[.147]
0.64
[.025]
.002
]
1.78
[.070]
0.05
.002
0.43
[.017
]
Position No. 1
Far Side
R 0.13 [.005]
or
0.13 [.005] x 45°
Recommended PC Board Layout
(Mirror image on opposite side)
PC Board Thickness: 1.57 [.062]
40
Catalog 65194
Revised 6-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
©2020 ICPDF网 联系我们和版权申明