640706-1 [MACOM]
MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors; MTA , CST- 100 II , SL- 156 AMP经济型电源( EP )连接器型号: | 640706-1 |
厂家: | Tyco Electronics |
描述: | MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors |
文件: | 总84页 (文件大小:2704K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MTA, CST-100 II, SL-156 and
AMP Economy Power
(EP) Connectors
NOT the LATEST
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Table of Contents
Introduction and Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 3
Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
.050 [1.27] Centerline Connectors
Introduction
This catalog has been designed
to assist you, our customer, iden-
tify products to satisfy your con-
nector needs for printed circuit
board headers, mass termination
connectors preloaded with con-
tacts, crimp-snap contacts and
housings, and card edge con-
nectors with preloaded contacts.
MTA-50 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-10
Introduction and Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
IDC Connector Kits (Feed-Thru and Closed End)
Ribbon Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6
Discrete Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8
Through-Hole Header Assemblies
Vertical and Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Surface Mount Header Assemblies
The list at right identifies by
centerline the types of product
available and is meant to be of
assistance to you in the product
selection process.
Vertical and Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
.100 [2.54] Centerline Connectors
MTA-100 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-31
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 13
Connectors — UL94V-2 and UL94V-0
Closed End with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15
Feed-Thru with and without Polarizing Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
LED Closed End and Feed-Thru — UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 15
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 17
Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 19
MTA-100 Posted Connectors (Wire-to-Wire) UL94V-2
Closed End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Feed-Thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Headers — UL94V-0
IDC
MTA-50
Flat — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Narrow Flat — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Polarized — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Friction Lock — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Headers with Retention Peg — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
High Profile Headers — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Polarized — High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . . . . .27
Friction Lock — High Temperature, Straight and Right-Angle Posts . . . . . . . . . . . . . .28
Polarized — Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Friction Lock — Surface Mount, Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Shrouded — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
CST-100 II Crimp Contacts, Housings and Shrouded Headers . . . . . . . . . . . . . . . . . . . . . . . . .31, 32
IDC
MTA-100
.156 [3.96] Centerline Connectors
MTA-156 IDC Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-57
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34, 35
Connectors — UL94V-2 and UL94V-0
Crimp
CST-100 II
Closed End with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .36, 37
Closed End without Locking Ramp, with and without Polarizing Tabs . . . . . . . . .36, 37
Feed-Thru with Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . . . .38, 39
Feed-Thru without Locking Ramp, with and without Polarizing Tabs . . . . . . . . . . .38, 39
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-42
Posted Connectors Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44
MTA-156 Posted Connectors (Wire-to-Wire) — UL94V-2
Closed End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Feed-Thru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
MTA-156 Headers — UL94V-0
IDC
MTA-156
© 1977, 1978, 1979, 1980, 1983, 1986,
1988, 1992, 1993, 1994, 1995, 1999,
2000, 2001, 2002, 2003 and 2005 by
Tyco Electronics Corporation.
Flat — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Flat — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Friction Lock — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Friction Lock — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Polarized Lock — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Polarized Lock — Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Friction Lock — High Temperature, Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Shrouded — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
MTA-156 Quad Connectors —UL94V-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54, 55
Closed End with Locking Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Feed-Thru with Locking Ramp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
All International Rights Reserved.
AMP, AMP-O-LECTRIC, AMP-O-MATIC,
AMPOMATOR, CERTI-CRIMP,
PRO-CRIMPER, MADISON CABLE and
TYCO are trademarks.
TEFLON is a trademark of E.I. DuPont
De Nemours and Company.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
2
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Table of Contents (Continued)
MTA-156 Card Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 57
Connectors — UL94V-0
Closed End with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Feed-Thru with and without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
SL-156 Crimp Connectors and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-62
Wire-to-Board Mateability Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Wire-to-Board Crimp Contacts and Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Wire-to-Board Housings — UL94V-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Housings with Through Board Latch — UL94V-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Housings and Contacts for Large Insulation Diameter (LID) Wire . . . . . . . . . . . . . . . . . .62
Crimp
SL-156
AMP Economy Power (EP) Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-69
.156 [3.96] Centerline Connectors
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Plug Housings, Low-Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Low-Profile Headers — Straight and Right-Angle Posts . . . . . . . . . . . . . . . . . . . . . . . . . .65
Low-Profile Headers, High Temp. — Straight and Right-Angle Posts . . . . . . . . . . . . . . .66
.200 [5.08] Centerline Connectors
Crimp
AMP EP Connectors
Plug Housings and Straight and Right-Angle Post Headers . . . . . . . . . . . . . . . . . . . . . .67
.312 [7.92] Centerline Connectors
Need more information?
Call Technical Support at the
numbers listed below.
Low-Profile Headers — Straight Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Single Connectors
1-Position Plug Housing and High-Profile Header — Straight Post . . . . . . . . . . . . . . . . .69
Technical Support is staffed
with specialists well versed
in Tyco Electronics products.
They can provide you with:
I Technical support
I Catalogs
MTA Wire Selection and Ribbon Cable Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
IDC Ribbon Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-74
MTA Wire Termination Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
MTA Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76-79
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80-82
Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
I Technical Documents
I Product Samples
I Authorized Distributor
Locations
Connector Selection Guide
Contact Wire-to-
Termin- Wire
Wire
Wire
Current
Rating
(A)**
Voltage
Rating
Operating
Temp.
Replace-
ment
Contacts
Center-
No. of
Positions
UL
Product Name
line
Size Insulation
(AWG) Dia. Max.
Approvals
Flammability
ation
Option
Max. (VAC) Range (°C)
.050" Centerline
MTA-50 IDC Connector
Kits and Headers
.050
1.27
.039*
30–26
R
IDC Planned
2–28
1
30
–55 to +105 V-0 & V-2
No
R
0.99
.100" Centerline
MTA-100 Connectors
and Headers
.100
.060*
28–22
R
R
IDC
Yes
2–28
2–28
5
4
250
250
–55 to +105 V-0 & V-2
Yes
Yes
R
R
2.54
1.52
CST-100 II Contacts
and Housings
.100
2.54
.065
26–22
Crimp Planned
–55 to +105
V-0
1.65
.156" Centerline
MTA-156 Connectors
and Headers
.156
.095*
26–18
R
R
IDC
IDC
Yes
No
2–24
7
600
600
–55 to +105 V-0 & V-2
Yes
Yes
R
R
3.96
2.41
.156
3.96
.095*
22–18
Quad Connectors
2–12
12.5
–55 to +105
–25 to +105
–25 to +105
V-0
V-0
V-0
2.41
1–24; 2–10
SL-156 Contacts
and Housings
.156
3.96
.105
2.67
R
R
Crimp
Crimp
No w/ through 24–18
board latch
10
10
250
250
Yes
Yes
R
R
SL-156 Large Ins. Dia. (LID) .156
Contacts and Housings 3.96
.112
2.84
No
2–24
24–16
.156", .200" and .312" Centerlines
.156
.118
8 (1 pos.)
R
R
R
Crimp
Crimp
Crimp
No
No
No
1–12
2–12
2–5
22–18
22–18
22–18
250
250
250
–25 to +105
–25 to +105
–25 to +105
V-0
V-0
V-0
Yes
Yes
Yes
R
R
R
3.96
3.00 7.5 (2–12 Pos.)
AMP Economy Power
(EP) Connector System
.200
5.08
.118
7.5 (2–12 Pos.)
3.00
.312
7.92
.118
7.5 (2–5 Pos.)
3.00
** When terminated one position at a time.
** Current Rating is application dependent.
3
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers
Product Facts
I 2–28 contact positions
I Connectors terminate 26,
28 and 30 AWG discrete wire
or .050 [1.27] centerline rib-
bon cable
I Color-coded housings
I Maximum cable insulation
diameter of .039 [0.99] with
PVC insulation only
I IDC contacts pre-loaded in
receptacle housing
I 30 V, 1 A contact rating
I Contact design allows for
gold-to-gold or tin-to-tin
interface
I Contacts are lubricated to
prevent fretting corrosion
I Wire feed-thru capability for
daisy-chain wiring or closed
end for point-to-point wiring
I Connectors are polarized for
proper mating
I Manual and semiautomatic
application tooling
I Mating heights shown below:
The MTA-50 IDC Connector
through-hole and surface
Dielectric Withstanding Voltage —
500 VAC
System is a wire-to-printed cir- mount configurations.
cuit board system with con-
Insulation Resistance —
1,000 megohms
Operating Temperature —
–55°C to +105°C for connector only;
cable rating may be lower
Typical uses of the MTA-50
tacts in a staggered, single
IDC connectors would be in
row on .050 [1.27] centerline.
the Appliance, Commercial
The design features wire feed-
and Home Equipment and
through capability for daisy-
Security products industries.
chain applications. Insulation
Technical Documents
Application Specification —
114-13072 MTA-50 Connectors
Product Specifications —
108-2113 MTA-50 Connectors
See the following pages for
related products:
I Ribbon Cable (reels), .050
[1.27] centerline (p. 71)
I Application Tooling (p. 76)
I Cable Assemblies (p. 74)
displacement contacts are
used to terminate a wide
range of conductor sizes.
Ribbon cable can also be ter-
minated when the appropriate
receptacle assembly and
strain relief cover are used.
.503 Max.
[12.78] Vertical
or
100-4703 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
Max.
.254
Right-Angle
[6.45]
Performance Data
Voltage Rating — 30 VAC
Current Rating — 1 amp max.
Low-Level Resistance —
30 milliohms
Header assemblies for board
mount applications include
right-angle (horizontal) and
vertical mount products.
These are available in
PVC insulation)
100-6257 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
I Component Recognized by
Underwriters Laboratories
Inc. to US and Canadian
Standards,
TPO insulation)
MTA-50 IDC Connector Kit / Header Mateability Guide
Headers Headers
Headers
File No. E28476
(Connectors and Headers)
File No. E53793
(Ribbon Cable)
1445341
1445344
1445347
1445350
1445353
1445356
1445359
1445362
1445365
1445368
1445371
1445374
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
1445343
1445346
1445349
1445352
1445355
1445358
1445361
1445364
1445367
1445370
1445373
1445376
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
1445342
1445345
1445348
1445351
1445354
1445357
1445360
1445363
1445366
1445369
1445372
1445375
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
These matrixes have been
prepared to assist you in
defining the correct mating
halves for the MTA-50 header
and connector kit combina-
tion. Where a “Y” is indicated
the combination is a valid
mating pair.
Note: Tyco Electronics does NOT rec-
ommend intermating connectors and
headers with different contact plat-
ings.
Matrix for Tin Plated
Part Numbers
Matrix for .000030 [0.00076]
Gold Plated Part Numbers
Matrix for .000015 [0.00038]
Gold Plated Part Numbers
4
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
Feed-Thru and Closed End
Connectors
Receptacle Assemblies — Ribbon Cable
.004
A
[
0.10]
(See Note 1)
.006
0.15
.315
[8.00
]
.150
[3.81]
Material and Finish
Housing — UL 94V-2 rated, thermo-
plastic
.050
[1.27]
Ref.
Position 1
Contacts — Phosphor bronze;
.000100 [0.00254] min. tin in wire
termination area, over .000050 [0.00127]
min. nickel; choice on mating end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.035
[0.89]
Ref.
.003
.003
.190
[4.83
.100
[2.54
0.08
]
0.08
]
Notes:
1. To determine connector overall
length (dim. A), multiply .050 x the
number of circuits and add .082.
Example: .050 x 10 circuits
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Color Coding by Wire Size for
UL94V-0 Connectors
26 AWG — Blue
28 AWG — Green
30 AWG — Brown
equals 0.50 + .082 = .582 [14.78].
2. Strain relief covers shown on
page 6 are required and sold as
part of the Connector Kit.
3. Stranded UL Style 1061 or equiv-
alent wire is recommended.
4. Unless otherwise stated all toler-
ances (except plating) to be .005
[ 0.13].
For Strain Relief Covers see
page 6.
For mating Headers see
pages 9 and 10.
5. Consult Product Drawing for
RoHS Compliant information.
For Mateability Guide, see
matrixes on page 4.
Connector Kits — Ribbon Cable
Base Part Numbers
Connector Kit Ordering
Information
Connector Kit consists of
Receptacle Assembly and
Strain Relief Cover.
Feed-Thru
Closed End
Connector
Type &
Connector Kit
Part Nos.
No. of
Circuits
Connector Kit
Part Nos.
No. of
Circuits
Wire Size
Tin Plated
26 AWG
1445359
1445362
1445365
2–28
2–28
2–28
1445368
1445371
1445374
2–28
2–28
2–28
0.12–0.15 mm2
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part num-
ber 1445359
28 AWG
0.08–0.09 mm2
30 AWG
0.05–0.06 mm2
.000030 [0.00076] Gold Plated
26 AWG
1445361
2–28
2–28
2–28
1445370
1445373
1445376
2–28
2–28
2–28
0.12–0.15 mm2
2 position = 0-1445359-2
and
28 position = 2-1445359-8
28 AWG
1445364
1445367
0.08–0.09 mm2
30 AWG
0.05–0.06 mm2
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
.000015 [0.00038] Gold Plated
26 AWG
1445360
2–28
2–28
2–28
1445369
1445372
1445375
2–28
2–28
2–28
0.12–0.15 mm2
28 AWG
1445363
1445366
0.08–0.09 mm2
30 AWG
0.05–0.06 mm2
5
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
.068
Connector Kits — Ribbon
Cable (Continued)
2 Plcs.
[1.73]
Strain Relief Covers
Material and Finish
Strain Relief Cover — UL 94V-0
rated, thermoplastic, black
.040
2 Plcs.
[1.02]
.090
[2.29]
4 Plcs.
Feed-Thru
A
.008
0.20
.237
[6.02
]
.006
0.15
]
.123
[3.12
Feed-Thru
Closed End
.255
[6.48]
A
.008
0.20
]
.237
[6.02
Closed End
Feed-Thru and Closed End
No. of Circuits
Dim. A
No. of Circuits
Dim. A
.260
6.60
.960
24.38
2
16
.310
1.010
3
4
17
18
19
20
21
22
23
24
25
26
27
28
7.87
25.65
.360
9.14
1.060
26.92
.410
10.41
1.110
28.19
5
.460
11.68
1.160
29.46
6
.510
12.95
1.210
30.73
7
.560
14.22
1.260
32.00
8
.610
15.49
1.310
33.27
9
.660
16.76
1.360
34.54
10
11
12
13
14
15
.710
18.03
1.410
35.81
.760
19.30
1.460
37.08
.810
20.57
1.510
38.35
.860
21.84
1.560
39.62
.910
23.11
6
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
Feed-Thru and Closed End
Connectors
Receptacle Assemblies — Discrete Wire
.004
A
[
0.10]
(See Note 1)
.006
0.15
.315
[8.00
]
.150
[3.81]
Material and Finish
Housing — UL 94V-2 rated, thermo-
plastic
.050
[1.27]
Ref.
Position 1
Contacts — Phosphor bronze;
.000100 [0.00254] min. tin in wire
termination area, over .000050 [0.00127]
min. nickel; choice on mating end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.035
[0.89]
Ref.
.003
.003
.190
[4.83
.100
[2.54
Notes:
0.08
]
0.08
]
1. To determine connector overall
length (dim. A), multiply .050 x the
number of circuits and add .082.
Example: .050 x 10 circuits
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Color Coding by Wire Size for
UL94V-0 Connectors
26 AWG — Blue
28 AWG — Green
30 AWG — Brown
equals 0.50 + .082 = .582 [14.78].
2. Strain relief covers shown on
page 8 are required and sold as
part of the Connector Kit.
3. Stranded UL Style 1061 or equiv-
alent wire is recommended.
4. Unless otherwise stated all toler-
ances (except plating) to be .005
[ 0.13].
For Strain Relief Covers see
page 8.
For mating Headers see
pages 9 and 10.
5. Consult Product Drawing for
RoHS Compliant information.
For Mateability Guide, see
matrixes on page 4.
Connector Kits — Discrete Wire
Base Part Numbers
Connector Kit Ordering
Information
Connector Kit consists of
Receptacle Assembly and
Strain Relief Cover.
Feed-Thru
Closed End
Connector
Type &
Connector Kit
Part Nos.
No. of
Circuits
Connector Kit
Part Nos.
No. of
Circuits
Wire Size
Tin Plated
26 AWG
1445341
1445344
1445347
2–28
2–28
2–28
1445350
1445353
1445356
2–28
2–28
2–28
0.12–0.15 mm2
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part num-
ber 1445341
28 AWG
0.08–0.09 mm2
30 AWG
0.05–0.06 mm2
.000030 [0.00076] Gold Plated
26 AWG
1445343
2–28
2–28
2–28
1445352
1445355
1445358
2–28
2–28
2–28
0.12–0.15 mm2
2 position = 0-1445341-2
and
28 position = 2-1445341-8
28 AWG
1445346
1445349
0.08–0.09 mm2
30 AWG
0.05–0.06 mm2
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
.000015 [0.00038] Gold Plated
26 AWG
1445342
2–28
2–28
2–28
1445351
1445354
1445357
2–28
2–28
2–28
0.12–0.15 mm2
28 AWG
1445345
1445348
0.08–0.09 mm2
30 AWG
0.05–0.06 mm2
7
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
.068
Connector Kits —
Discrete Wire (Continued)
2 Plcs.
[1.73]
Strain Relief Covers
Material and Finish
Strain Relief Cover — UL 94V-0
rated, thermoplastic, black
.040
2 Plcs.
[1.02]
.090
[2.29]
4 Plcs.
Feed-Thru
A
.008
0.20
.237
[6.02
]
.006
0.15
]
.123
[3.12
Feed-Thru
Closed End
.255
[6.48]
A
.008
0.20
]
.237
[6.02
Closed End
Feed-Thru and Closed End
No. of Circuits
Dim. A
No. of Circuits
Dim. A
.260
6.60
.960
24.38
2
16
.310
1.010
3
4
17
18
19
20
21
22
23
24
25
26
27
28
7.87
25.65
.360
9.14
1.060
26.92
.410
10.41
1.110
28.19
5
.460
11.68
1.160
29.46
6
.510
12.95
1.210
30.73
7
.560
14.22
1.260
32.00
8
.610
15.49
1.310
33.27
9
.660
16.76
1.360
34.54
10
11
12
13
14
15
.710
18.03
1.410
35.81
.760
19.30
1.460
37.08
.810
20.57
1.510
38.35
.860
21.84
1.560
39.62
.910
23.11
8
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
Note: To determine header overall
length (dim. A), multiply .050
x the number of circuits and
add .150. Example: .050 x 6
circuits equals .300 + .150 =
.450 [11.43].
Through-Hole Header
Assemblies
.035
[0.89]
Ref.
Vertical
Circuit #1
.170
[4.32]
A
.003
0.08
.220
[5.59
]
.060
[1.52]
.125
[3.18]
Ref.
Material and Finish
Housing — UL 94V-0 rated, thermo-
plastic, black
.035
[0.89]
Ref.
.016
[0.41]
.050
[1.27]
Ref.
Ref.
Contacts — Brass, .000100 [0.00254]
min. tin over .000050 [0.00127] min.
nickel on solder legs; choice on mating
end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
Base Part Numbers
.068
[1.73]
.100
[2.54]
Through-Hole
Header
Part Nos.
Typ.
.003
.060
[1.52
Dia.
0.08
No. of
Posts
]
.002
.050
[1.27]
.031
[0.78
Typ.
Dia. Typ.
0.05
]
Standard UL 94V-0, Tin Plated
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
1445120
2–28
.035
[0.89]
Circuit #1
.0705
[1.90]
Standard UL 94V-0
.000030 [0.00076] Gold Plated
.250*
[6.35]
1445125
2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
Recommended Mounting Hole Size and
Pattern for .062 [1.57] Thick PC Board
1445123
2–28
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
Right-Angle
.003
0.08
.220
[5.59
A
]
Circuit #1
.035
[0.89]
Ref.
For mating Connector Kits
see pages 5 through 8.
.180
[4.57]
For mateability options, see
matrixes on page 4.
.125
Ref.
[3.18]
Header Ordering Information
.035
[0.89]
.016
[0.41]
Ref.
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part num-
ber 1445120
Ref.
.050
[1.27]
Ref.
Base Part Numbers
.100
[2.54]
.035
.002
0.05
.031
[0.78
[0.89]
Dia. Typ.
Through-Hole
]
Header
Part Nos.
Standard UL 94V-0, Tin Plated
No. of
Posts
Circuit #1
.050
2 position = 0-1445120-2
and
28 position = 2-1445120-8
Typ.
.210
[5.33]
[1.27]
.250*
[6.35]
1445169
2–28
Standard UL 94V-0
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
.000030 [0.00076] Gold Plated
Recommended Mounting Hole Size and
Pattern for .062 [1.57] Thick PC Board
1445171
2–28
Standard UL 94V-0
.000015 [0.00038] Gold Plated
* 6-circuit Dim. shown, refer to Product Drawing for ac
PCB Dimensions and RoHS Compliant information.
1445170
2–28
9
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-50 IDC Connectors and Headers (Continued)
Note: To determine header overall
length (dim. A), multiply .050
x the number of circuits and
add .150. Example: .050 x 6
circuits equals .300 + .150 =
.450 [11.43].
Surface Mount Header
Assemblies
.035
Ref.
[0.89]
Vertical
Circuit #1
.170
[4.32]
A
.003
0.08
.220
[5.59
]
.249
[6.32]
Ref.
.100
[2.54]
Typ.
.001
.028
[0.71
Material and Finish
Housing — UL 94V-0 rated, thermo-
plastic, black
Typ.
0.03
]
.050
[1.27]
Typ.
.001
0.03
.065
[1.65
.100
[2.54]
Typ.
.162
[4.11]
]
.003
0
8
Contacts — Brass, .000100 [0.00254]
min. tin over .000050 [0.00127] min.
nickel on solder pads; choice on mating
end:
.000100 [0.00254] min. tin or
.000030 [0.00076] gold or
.000015 [0.00038] gold, over
.000050 [0.00127] min. nickel
Boardlock — Phosphor bronze, tin
plated .000100 [0.000254] min. over
.000050 [0.00127] min. nickel
2 Plcs.
Base Part Numbers
0.08
]
Surface Mount
Header
Part Nos.
No. of
Posts
.003
0.08
]
.145
[3.68
2 Plcs.
Standard UL 94V-0, Tin Plated
1445121
2–28
Standard UL 94V-0
.000030 [0.00076] Gold Plated
1445126
2–28
Recommended PC Board Layout
for use with .010 [0.25] Thick Stencil
Standard UL 94V-0
.000015 [0.00038] Gold Plated
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
1445124
2–28
Note: All SMT product is pre-
packaged in standard tape and
reel format.
Right-Angle
A
.003
0.08
.220
[5.59
.050
[1.27]
Ref.
.035
[0.89]
]
Ref.
Circuit #1
For mating Connector Kits
see pages 5 through 8.
.180
[4.57]
For mateability options, see
matrixes on page 4.
.270
[6.86]
Ref.
.050
[1.27]
Typ.
.001
0.03
Header Ordering Information
.028
[0.71
.162
[4.11]
Typ.
]
Base part number prefixes
and suffixes indicate the
number of circuit positions,
for example: Base part num-
ber 1445121
.128
[3.25]
Circuit #1
Base Part Numbers
.001
.075
[1.91
Surface Mount
Header
Part Nos.
0.03
]
No. of
Posts
.003
0.08
.145
[3.68
2 position = 0-1445121-2
and
28 position = 2-1445121-8
]
.003
.070
[1.78
.100
[2.54]
Standard UL 94V-0, Tin Plated
2 Plcs.
0.08
]
.574*
[14.58]
1445172
2–28
2 Plcs.
Standard UL 94V-0
Note: Tin-plated connectors and
headers in even position sizes from
2–12 and 18 are stocked parts; all
other position sizes and products
with gold-plated contacts are
Make To Order.
.000030 [0.00076] Gold Plated
1445174
2–28
Recommended PC Board Layout
for use with .010 [0.25] Thick Stencil
Standard UL 94V-0
.000015 [0.00038] Gold Plated
* 6-circuit Dim. shown, refer to Product Drawing for actual
PCB Dimensions and RoHS Compliant information.
1445173
2–28
10
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.100 [2.54] Centerline MTA-100 IDC Connectors and Headers
Product Facts
I Connectors and headers for
2 through 28 positions; wire
sizes of 22, 24, 26 and
28 AWG [0.4-0.08 mm2]
I Wire-to-Post Connectors
preloaded with dual beam
contacts
I Connectors and headers,
except shrouded headers,
are end-to-end stackable
I Connector styles include
both closed end and feed-
thru connectors with locking
ramps, with and without
polarizing tabs
I Molded ribs on housing do
not allow reverse mating
I Posted connectors for 2
through 19 positions
I Connectors preloaded with
IDC contacts
I All contacts are slotted for
insulation displacement
(IDC) terminal technique
I Contacts are lubricated for
fretting corrosion protection
I Benefits derived from the
MTA-100 system include
increased quality and ease
of handling such as—
I
I
I
I
I
I
One-step assembly
No wire stripping
No contact damage
Reduced wiring errors
Simpler tooling
Simple maintenance and
repair
I Meets the material require-
ments of Table 23.1 of
UL1410 Standards for
Television Receiver and
Video Products (wire-to-
post connectors only)
I Recognized under the
Component Program of
MTA-100 connectors
one wire to be terminated
into an IDC contact slot.
Performance Data*
Voltage Rating —250 vac
Current Rating —5 amp max.
Low-Level Resistance —
6 m⍀ max. initial
Dielectric Withstanding Voltage—
750 vac/1 min.
Insulation Resistance—
5000 M⍀ min. initial
Operating Temperature—
Ϫ55Њ C to ϩ105Њ C
accept discrete and ribbon
cable wire sizes ranging
from 22 – 28 AWG [0.4 –
The wire-to-post connector
housing material is flame
retardant thermoplastic,
either UL94V-2 or UL94V-0
rated.
2
Underwriters
0.08 mm ] with maximum
R
Laboratories Inc.,
insulation outside diameter
of .060 [1.52] for terminat-
ing single wire and .050
[1.27] for mass termination
of wires. Tin plated solid,
fused stranded, or stranded
(7 strands) wire with PVC
insulation can be used on
File No. E28476
I Certified by Canadian
A full line of .100 [2.54]
centerline headers com-
pletes the system. Headers
are available with straight or
right-angle posts, in flat,
polarized or friction lock
styles. Headers are avail-
able in 2 through 28
Standards
R
Association,
File No. LR7189
Note: Refer to page 70 for approved
wire listings.
Technical Documents
Product Specification
108-1050 MTA-100 Connectors
Application Specifications
114-1019 MTA-100 Connectors
114-1031 MTA-100 Ribbon Cable
Assembly
2
22 – 28 AWG [0.4 – 0.9 mm ]
MTA-100 connectors and
19 stranded wire on
*Refer to the Product Specification
for additional electrical, mechanical
and environmental performance
tests and requirements.
2
positions. Shrouded headers
are available in 2 through
14 positions.
22–24 AWG [0.4– 0.2 mm ]
MTA-100 connectors. Only
11
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Connector/Header Mateability Guide
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 header and connector combination. Where a “Y” is indicated the combination is
a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.
Matrix for Tin Plated
Part Numbers
Headers
640440
640441
640442
640443
640468
640469
640470
640471
640620
640621
640622
640623
641311
641312
641313
641314
641534
641535
641536
641537
641653
641654
641655
641656
643498
643813
643814
643815
643816
643828
644083
644312
644313
644497
644511
644512
644513
644514
644540
644563
644564
644565
644574
644575
644576
644577
644578
644579
644795
*1375820
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
*Select contact plating to match header plating.
12
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
www.tycoelectronics.com
C. America: 57-1-254-4444
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Connector/Header Mateability Guide (Continued)
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 header and connector combination. Where a “Y” is indicated the combination is
a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Headers
641237
641238
641239
641240
641241
641242
641243
641244
644020
644042
644043
644044
644702
644726
*1375820
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
Headers
641190
641191
641192
641193
641198
641199
641200
641201
644038
644040
647477
647480
*1375820
1744020
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N N
Y
Y
*Select contact plating to match header plating.
13
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Connectors—Closed End and Feed-Thru
Material and Finish
Closed End Connectors
Housing —UL94V-2 rated, nylon, see
below for color; or UL94V-0 rated,
nylon, black
Contacts—Phosphor bronze, post tin
plated, .000030 [0.00076] or .000015
[0.00038] post gold-plated over nickel
.275
[6.99]
A
.056
[1.42]
.075
[1.91]
.245
.275
[6.99]
.184
[4.67]
[6.22]
Color Coding by
Wire Size for UL94V-2
Connectors
28 AWG—Green
26 AWG—Blue
24 AWG—White
22 AWG—Red
.100
[2.54]
.520
[13.21]
Typ.
Without Polarizing Tabs
All wire sizes in UL94V-0—
Black
.075
[1.91]
For mateability options, see
matrix on pages 12 and 13.
.228
[5.80]
For mating half visuals, see
pages 20 thru 30.
With Polarizing Tabs
Notes:
1. Refer to pages 70-74 for
approved wire listing.
2. For strain reliefs and dust covers,
see page 16.
3. For keying plugs, see page 17.
Feed-Thru Connectors
4. Other circuit sizes are available
upon request. Minimums may
apply.
.275
[6.99]
A
5. Connector circuits can be molded
closed for keying purposes.
Minimums may apply.
.075
[1.91]
.056
[1.42]
6. Where no part numbers appear in
the chart, parts can be made
available upon request. Minimums
may apply.
.305
[7.75]
.245
[6.22]
.184
[4.67]
7. To determine connector overall
length (dim. A), multiply .100 x the
number of circuits. Example: .100
x 10 circuits equals 1.000 inch
[25.4 mm].
.100
[2.54]
.520
[13.21]
Typ.
Without Polarizing Tabs
.075
[1.91]
.228
[5.80]
With Polarizing Tabs
14
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Connectors—Closed End and Feed-Thru (Continued)
Base Part Numbers
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number, and their
RoHS (Restrictions on
Certain Hazardous
Substances) Compliant
(lead free) equivalent avail-
able for the described con-
nectors.
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position closed end con-
nector without polarizing tabs
for 22 AWG wire would be:
Base number 640440 plus
prefix-and-suffix
4- — -0
The correct ordering num-
ber is 4-640440-0
All part numbers are the
RoHS equivalent version.
Example:
Closed End
Feed-Thru
Without Tabs
With Tabs
Without Tabs
With Tabs
Connector Type
& Wire Size
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Standard UL94V-2, Tin Plated
22 AWG
640440
32–58
32–58
32–58
32–58
643813
643814
643815
643816
32–58
32–58
32–58
32–58
640620
640621
640622
640623
32–58
32–58
32–58
32–58
6445401
6445631
6445641
6445651
32–45
32–54
32–45
32–45
0.3–0.4 mm2
24 AWG
640441
640442
640443
0.2 mm2
26 AWG
0.12–0.15 mm2
28 AWG
0.08–0.09 mm2
Tape Mounted on Reel UL94V-2, Tin Plated
22 AWG
640468
640469
640470
640471
32–58
644511
644512
644513
644514
42–68
32–58
32–58
32–58
641311
641312
641313
641314
32–58
32–58
32–58
32–58
—
—
—
—
—
—
—
—
0.3–0.4 mm2
24 AWG
32–58
32–58
32–58
0.2 mm2
26 AWG
0.12–0.15 mm2
28 AWG
0.08–0.09 mm2
Standard UL94V-2, .000030 [0.00076] Gold Plated
22 AWG
641237
641238
641239
641240
32–58
32–58
32–58
32–58
644042
644020
6440431
6440441
32–58
32–58
32–44
32–44
641241
641242
641243
641244
32–58
32–58
32–58
32–58
6447021
—
32–45
—
0.3–0.4 mm2
24 AWG
0.2 mm2
26 AWG
6447261
—
32–45
—
0.12–0.15 mm2
Lead Free
28 AWG
No. of
Pos.
0.8–0.9 mm2
RoHS
Prefix/Suffix
Standard UL94V-2, .000015 [0.00038] Gold Plated
22 AWG
2
3-640440-2
3-640440-3
3-640440-4
3-640440-5
3-640440-6
3-640440-7
3-640440-8
3-640440-9
4-640440-0
4-640440-1
4-640440-2
4-640440-3
4-640440-4
4-640440-5
4-640440-6
4-640440-7
4-640440-8
4-640440-9
5-640440-0
5-640440-1
5-640440-2
5-640440-3
5-640440-4
5-640440-5
5-640440-6
5-640440-7
5-640440-8
3
641190
641191
641192
641193
32–58
32–58
32–58
32–58
6440381
17440201
6440401
—
32–44
32–44
32–44
—
641198
641199
641200
641201
32–58
32–58
32–58
32–58
647477
—
32–46
—
0.3–0.4 mm2
4
24 AWG
0.2 mm2
5
6
26 AWG
647480
—
32–43
—
0.12–0.15 mm2
7
28 AWG
8
0.08–0.09 mm2
9
LED*, UL94V-2, Tin Plated (See Note 1)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
22 AWG
641534
32–33
32–33
32–33
32–33
—
644795
—
—
32–33
—
641653
641654
641655
641656
32–33
32–33
32–33
32–33
—
—
—
—
—
—
—
—
0.3–0.4 mm2
24 AWG
641535
0.2 mm2
26 AWG
641536
0.12–0.15 mm2
28 AWG
641537
—
—
0.08–0.09 mm2
Standard UL94V-0, Tin Plated (Gold is available, minimums may apply.) (Black in color)
22 AWG
6434981
6445741
6438281
32–45
32–45
32–45
6440831
6443121
6443131
32–45
32–45
32–45
6445751
6445761
6445771
32–45
32–45
32–45
6445781
6445791
6444971
32–45
32–45
32–45
0.3–0.4 mm2
24 AWG
0.2 mm2
26 AWG
0.12–0.15 mm2
*LED connectors are designed to mate with .014–.020 [0.36–0.51] diameter posts or square leads.
1
Other circuit sizes are available upon request. Minimums may apply.
2 Tape mounted.
Note: Blocked circuit configurations are available. Contact product engineer or product manager for details.
Minimums may apply.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
15
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Connector Accessories
Closed End Strain Relief Covers
Closed End Dust Covers
Covers
.345
[8.76]
.127
[3.23]
.335
[8.51]
Retention Dimple
Material (RoHS Compliant)
Strain Relief Cover—UL94V-2
.340
[8.64]
A
rated, nylon, white
.360
Dust Covers —UL94V-0 rated,
polyester, white
[9.14]
.105
[2.67]
.130
[3.3]
A
Note: This portion of the front locking bar
may or may not be present.
Feed-Thru Strain Relief Covers
Feed-Thru Dust Covers
.127
[3.23]
.360
[9.14]
Retention Dimple
.245
[6.22]
A
Cover Ordering Information
.395
[10.03]
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
.130
[3.3]
A
Note: This portion of the front locking bar
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for
a 10-position closed end
strain relief cover would be:
may or may not be present.
Base Part Numbers
Closed End
Feed-Thru
Base number 643075 plus
Strain Relief
Covers
Dust
Strain Relief
Covers
Dust
Covers
Covers
prefix-and-suffix
Cover
No. of
Circuits
Cover
No. of
Circuits
Cover
No. of
Circuits
Cover
No. of
1- — -0
Part Nos.
Part Nos.
Part Nos.
Part Nos.
Circuits
643075
2–28
640550
2–28
643077
2–28
640642
3-28
The correct ordering num-
ber is
1-643075-0
Cover Length
No. of
Circuits
Dim.
A
Prefix/
Suffix
No. of
Circuits
Dim.
A
Prefix/
Suffix
No. of
Circuits
Dim.
A
Prefix/
Suffix
No. of
Circuits
Dim.
A
Prefix/
Suffix
2.300
1.600
.200
.900
23
2- -3
16
1- -6
1- -7
1- -8
1- -9
2- -0
2- -1
2- -2
2
3
4
5
6
7
8
-2
-3
-4
-5
-6
-7
-8
9
-9
58.42
40.64
5.08
22.86
2.400
60.96
1.700
43.18
.300
7.62
1.00
25.4
24
25
26
27
28
2- -4
2- -5
2- -6
2- -7
2- -8
17
18
19
20
21
22
10
11
12
13
14
15
1- -0
1- -1
1- -2
1- -3
1- -4
1- -5
2.500
63.5
1.800
45.72
.400
10.16
1.100
27.94
2.600
66.04
1.900
48.26
.500
12.7
1.200
30.48
2.700
68.58
2.000
50.8
.600
15.24
1.300
33.02
2.800
71.12
2.100
53.34
.700
17.78
1.400
35.56
2.200
55.88
.800
20.32
1.500
38.1
16
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Connector Accessories (Continued)
Keying Plug with Carrier
Strip (10 plugs per strip)
.027
[0.69]
Sq.
Part No. 641994-1
.038
[0.97]
.300
[7.62]
Material (RoHS Compliant)
UL94V-2 rated, nylon, natural color
.065
[1.65]
.077
[1.96]
Note: Removal of contact is not
necessary when using keying plug.
.125
[3.18]
.500
[12.7]
Ref.
1.800
[45.72]
Ref.
Replacement IDC Contacts
Material and Finish
Phosphor bronze, post tin plated;
.000030 [0.00076] or .000015
[0.00038] post gold plated over nickel
Part Numbers
Wire Size
Standard
.000030 [0.00076]
Gold Plated
.000015 [0.00038]
Gold Plated
LED
2
AWG
mm
Tin Plated
Tin Plated
22
24
26
28
0.3–0.4
0.2
640636-3
640637-3
640638-3
640639-2
641186-4
641187-4
641188-4
641189-4
641186-3
641187-3
641188-3
641189-3
641643-2
641644-2
641645-2
641646-2
0.12–0.15
0.08–0.09
Note: Tyco Electronics does not rec-
ommend terminating an MTA
contact more than one time.
Use replacement contacts
when required for field repairs
or wire changes.
2
.452
[11.48]
.075
[1.91]
.142
[3.61]
Max.
Wire Size
Part Nos.
Loose Piece* Strip**
640709-2 640708-2
Crimp Snap-In Contacts
2
AWG
mm
.070
[1.78]
26-22 0.12–0.4
Material and Finish
Phosphor bronze, tin plated
**Hand Tool No. 59836-1 (IS 408-6527)
**Applicator No. 466747-1 (IS 408-8040)
.425
[10.8]
Special applications for crimp snap-in contacts are:
1. Double wire per contact
.070
[1.78]
2. Coax or shielded wire
3. Mixed wire size in same connector
Note: Only one crimp snap-in contact per connector.
17
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Posted Connector/Connector Mateability Guide
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not accept-
able for mating.
Matrix for Tin Plated
Part Numbers
Posted Connectors
640440
640441
640442
640443
640468
640469
640470
640471
640620
640621
640622
640623
641311
641312
641313
641314
641534
641535
641536
641537
641653
641654
641655
641656
643498
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
643813 Y* Y* Y* Y* Y* Y* Y* Y*
643814 Y* Y* Y* Y* Y* Y* Y* Y*
643815 Y* Y* Y* Y* Y* Y* Y* Y*
643816 Y* Y* Y* Y* Y* Y* Y* Y*
643828
Y Y Y Y Y Y Y Y
644083 Y* Y* Y* Y* Y* Y* Y* Y*
644312 Y* Y* Y* Y* Y* Y* Y* Y*
644313 Y* Y* Y* Y* Y* Y* Y* Y*
644497 Y* Y* Y* Y* Y* Y* Y* Y*
644511 Y* Y* Y* Y* Y* Y* Y* Y*
644512 Y* Y* Y* Y* Y* Y* Y* Y*
644513 Y* Y* Y* Y* Y* Y* Y* Y*
644514 Y* Y* Y* Y* Y* Y* Y* Y*
644540 Y* Y* Y* Y* Y* Y* Y* Y*
644563 Y* Y* Y* Y* Y* Y* Y* Y*
644564 Y* Y* Y* Y* Y* Y* Y* Y*
644565 Y* Y* Y* Y* Y* Y* Y* Y*
644574
644575
644576
644577
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644578 Y* Y* Y* Y* Y* Y* Y* Y*
644579 Y* Y* Y* Y* Y* Y* Y* Y*
644795 Y* Y* Y* Y* Y* Y* Y* Y*
1375820
N N N N N N N N
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
18
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Posted Connector/Connector Mateability Guide (Continued)
This matrix has been prepared to assist you, our customer, in defining the correct mating halves
for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not accept-
able for mating.
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Posted Connectors
641237
641238
641239
641240
641241
641242
641243
641244
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644020 Y* Y* Y* Y* Y* Y* Y* Y*
644042 Y* Y* Y* Y* Y* Y* Y* Y*
644043 Y* Y* Y* Y* Y* Y* Y* Y*
644044 Y* Y* Y* Y* Y* Y* Y* Y*
644702 Y* Y* Y* Y* Y* Y* Y* Y*
644726 Y* Y* Y* Y* Y* Y* Y* Y*
1375820
N N N N N N N N
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
Posted Connectors
641190
641191
641192
641193
641198
641199
641200
641201
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
644038 Y* Y* Y* Y* Y* Y* Y* Y*
644040 Y* Y* Y* Y* Y* Y* Y* Y*
647477 Y* Y* Y* Y* Y* Y* Y* Y*
647480 Y* Y* Y* Y* Y* Y* Y* Y*
1375820
N N N N N N N N
1744020 Y* Y* Y* Y* Y* Y* Y* Y*
*2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100
connectors with polarizing tabs.
19
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru
Closed End
Feed-Thru
Material and Finish
Housing —UL 94V-2 rated, nylon, see
chart for color
Contacts—Copper alloy, post tin or
gold plated over nickel (see chart)
B
Dim.
B
Dim.
Notes:
1. Mating half visuals - pages 14 & 15.
2. Use feed thru strain relief covers & feed
thru dust covers (if needed) - page 16.
3. Approved wire listing - pages 70 thru 74.
.843
[21.40]
.843
[21.40]
.079
[2.00]
.079
[2.00]
A Dim.
A Dim.
.025
[0.54]
.025
Sq.
.303
[7.70]
.303
[7.70]
Sq.
[0.54]
.415
.415
[10.54]
[10.54]
.100
Typ.
.100
Typ.
[2.54]
[2.54]
Base Part Numbers
Connector Ordering
Information
Closed End Connector
RoHS Equiv.
Feed-Thru Connector
No. of Circuits
Connector Type
& Wire Size
Part Nos.
Part Nos.
The “Base Part Numbers”
Chart at right shows the base
part number.
Standard UL 94V-2, Tin Plated
22 AWG
2
2
2
2
647000
647001
647002
647003
32–491
32–491
32–491
32–491
647004
647005
647006
647007
—
—
—
—
0.3–0.4 mm2
24 AWG
Prefixes and suffixes are
determined by the number of
circuit positions in the connec-
tor. For example, the complete
part number for a 12-position
closed end connector for
22 AWG wire would be:
Base number 647000 plus
prefix-and-suffix
0.2 mm2
26 AWG
0.12–0.15 mm2
28 AWG
0.08–0.09 mm2
Standard UL 94V-2, .000030 [0.00076] Gold Plated
22 AWG
647008
32–491
32–491
32–491
32–491
647012
647013
647014
647015
—
—
—
—
2
2
2
2
0.3–0.4 mm2
24 AWG
647009
0.2 mm2
4- — -2
26 AWG
647010
0.12–0.15 mm2
The correct ordering number is
28 AWG
647011
4-647000-2
0.08–0.09 mm2
All part numbers are the RoHS
equivalent version. Example:
Standard UL 94V-2, .000015 [0.00038] Gold Plated
22 AWG
647016
32–491
32–491
32–491
32–491
647020
647021
647022
647023
—
—
—
—
2
2
2
2
0.3–0.4 mm2
Lead Free
No. of
Pos.
RoHS
24 AWG
647017
0.2 mm2
Prefix/Suffix
2
3-647000-2
thru
26 AWG
647018
0.12–0.15 mm2
28 AWG
647019
0.08–0.09 mm2
19
4-647000-9
1
See page 15 for an explanation of RoHS
lead free equivalents.
2 and 3 position MTA-100 Posted Connectors (Closed End) can not mate with MTA-100 connectors with polarizing tabs.
Parts may be manufactured upon request. Minimums may apply. Contact product engineer or product manager for details.
2
Note: All RoHS equivalent part numbers
may not be available upon catalog
release. If the number you need is not
available, please contact Product
Dim.
Dim.
Dim.
Dim.
No. of
No. of
No. of
No. of
Circuits
Circuits
Circuits
Circuits
A
B
A
B
A
B
A
B
.300
.227
.700
.627
1.100
1.027
1.500
1.427
Engineering to expedite your request.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
[7.62] [5.77]
[17.78] [15.93]
[27.94] [26.09]
[38.10] [36.25]
Color Coding by Wire Size
for UL 94V-2 Connectors
22 AWG—Red
.400
.327
.800
.727
1.200
1.127
1.600
1.527
[10.16] [8.31]
[20.32] [18.47]
[30.48] [28.63]
[40.64] [38.79]
.500 .427
[12.70] [10.85]
.600 .527
[15.24] [13.39]
.900 .827
[22.86] [21.01]
1.000 .927
[25.40] [23.55]
1.300 1.227
[33.02] [31.17]
1.400 1.327
[35.56] [33.71]
1.700 1.627
[43.18] [41.33]
1.800 1.727
[45.72] [43.87]
1.900 1.827
[48.26] [46.41]
24 AWG—White
26 AWG—Blue
28 AWG—Green
Contacts—Copper alloy, post tin or
gold plated over nickel
–55°C to +105°C
Performance Data
Voltage Rating — 250 VAC
Current Rating — 4 amp max.
Low-Level Resistance —
16 mΩ max. initial
Dielectric Withstanding Voltage —
750 VAC/1 min.
Insulation Resistance — 5000 MΩ
min. initial
2.000
1.927
[50.80] [48.95]
Technical Documents
Product Specification
108-1050-1 MTA-100 Posted
Connector
Application Specification
114-1019 MTA-100 Connectors
Part Numbers
Wire Size
Tin
Plated
.000030
[.00076]
Gold Plated
2
AWG mm
.770
[19.55]
22 0.3–0.4 3-647030-1 3-647030-2
24 0.2 3-647031-1 3-647031-2
.075
[1.91]
Replacement IDC Contacts
26 0.12–0.15 3-647032-1 3-647032-2
28 0.8–0.9 3-647033-1 3-647033-2
Material and Finish
.083
[2.10]
.025
[0.64]
Operating Temperature —
20
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Flat Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
Right-Angle Post (.025 [0.64] Square)
Housing —UL94V-0 rated, polyester,
white
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Post No. 1
.200
[5.08]
A
Notes:
.200
[5.08]
.100
[2.54]
Typ.
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.025
[0.64]
Sq.
.050
[1.27]
Typ.
A
.062
[1.57]
.100
[2.54]
.140
[3.56]
Ref.
.295
[7.49]
Post No. 1
.535
[13.59]
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
.050
[1.27]
Typ.
.295
[7.49]
.025
[0.64]
Sq.
.140
[3.56]
Ref.
.100
[2.54]
Typ.
For mateability options, see
matrix on pages 12 and 13.
.100
[2.54]
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
X = .120 [3.05] min., .240 [6.1] max.
when mated with MTA-100 Connector.
X = .120 [3.05] min., when mated with
CST-100 II Connector.
The “Base Part Numbers”
Chart at right shows the base
part number.
.050/.040
[1.27/1.02]
Dia.
Edge of Board
Edge of Board
.050/.040
[1.27/1.02]
Dia.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts
would be:
.120
[3.05]
Min.
.100
[2.54]
Typ.
.100
[2.54]
X
Typ.
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Base number 641211 plus
prefix-and-suffix
4- — -0
Note: Consult Product Drawing for details
on placing headers onto PC boards.
The correct ordering number is
4-641211-0
All part numbers are the RoHS
equivalent version. Example:
Lead Free
No. of
Pos.
RoHS
Prefix/Suffix
Base Part Numbers
2
3-641211–2
thru
Straight Posts
Right-Angle Posts
Header
No. of Posts/
RoHS Equiv.
Header
No. of Posts/
RoHS Equiv.
28
5-641211-8
Part Nos.
Part Nos.
See page 15 for an explanation of
RoHS lead free equivalents.
Standard UL94V-0, Tin Plated
640452 2–28
640453
2–28
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Standard UL94V-0, .000030 [0.00076] Gold Plated
2–28
32–58
2–28
32–58
641211
641212
Standard UL94V-0, .000015 [0.00038] Gold Plated
2–28
32–58
2–28
32–58
641122
641123
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
21
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Narrow Flat Headers—Straight and Right-Angle
Material and Finish
Housing — UL94V-0 rated, polyester,
white
Straight Post (.025 [0.64] Square)
Right-Angle Post (.025 [0.64] Square)
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.110
[2.79]
Ref.
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers without retentive legs are
suitable for breakaway application.
3. 2 or 3 retentive leg(s) per header,
depending upon number of positions.
4. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.0335
[0.85]
Straight and
Right-Angle
Post with
A
.092
[2.34]
A
.092
[2.34]
Retentive Legs
.100
[2.54]
Typ.
.150
[3.81]
.100
[2.54]
Typ.
.260
[6.6]
Post No. 1
5. To determine header overall
length (dim. A) multiply .100 x the
number of posts minus (–) .012.
Example: .100 x 10 posts – .012
Post No. 1
.100
[2.54]
.295
[7.49]
.100
[2.54]
.505
[12.83]
=
.988 inches [25.1 mm].
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
.044
[1.12]
Typ.
.044
[1.12]
Typ.
.025
[0.64]
Sq.
.025
[0.64]
Sq.
.110
[2.79]
Ref.
.110
[2.79]
Ref.
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
.100
[2.54]
Typ.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
without retentive legs would be:
.100
[2.54]
Typ.
Edge of Board
Edge of Board
.050/.040
[1.27/1.02]
.050/.040
[1.27/1.02]
Dia.
Dia.
For Straight Leg
Headers
For Straight Leg
Headers
.060
[1.52]
Min.
.060
[1.52]
Min.
.002
0.05
.002
0.05
.037
[0.94
.037
[0.94
Dia.
Dia.
]
]
For Retentive Leg
Headers
For Retentive Leg
Headers
Base number 644456 plus
prefix-and-suffix
4- — -0
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
The correct ordering number is
4-644456-0
Note: Consult Product Drawing for details
on placing headers onto PC boards.
All part numbers are the RoHS
equivalent version. Example:
Lead Free
No. of
Pos.
RoHS
Prefix/Suffix
Base Part Numbers
2
3-644456-2
thru
Straight Posts
Right-Angle Posts
28
5-644456-8
Without
With
Without
With
Retentive Legs
Retentive Legs
Retentive Legs
Retentive Legs
See page 15 for an explanation of
RoHS lead free equivalents.
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
644457
644885
644889
Part Nos.
644694
644887
644891
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Standard UL94V-0, Tin Plated
644456 32–58
644695
32–58
2–28
2–28
32–58
2–28
2–28
32–58
2–28
2–28
Standard UL94V-0, .000030 [0.00076] Gold Plated
644884 2–28 644886
Standard UL94V-0, .000015 [0.00038] Gold Plated
644888 2–28 644890
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
High temperature product available. Please contact Sales Engineer or Product Information Center.
22
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Polarized Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
Right-Angle Post (.025 [0.64] Square)
Housing —UL94V-0 rated, polyester,
white
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.225
[5.72]
.225
[5.72]
.125
[3.18]
.125
[3.18]
Notes:
A
A
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.100
[2.54]
Typ.
.050
[1.27]
Typ.
.100
[2.54]
Typ.
.025
[0.64]
Sq.
.035
[0.89]
Min.
.025
[0.64]
Sq.
.035
[0.89]
Min.
.050
[1.27]
Typ.
3. All posts on retentive leg headers
are bent.
Post
No. 1
.295
[7.49]
.295
[7.49]
Post
4. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
.290
.290
[7.37]
No. 1
[7.37]
.535
[13.59]
.100
[2.54]
.140
[3.56]
.140
[3.56]
Ref.
For mateability options, see
matrix on pages 12 and 13.
.140
[3.56]
Max.
For mating half visuals, see
pages 14, 15 and 31.
.100
[2.54]
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
.125
[3.18]
Ref.
34°
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 641213 plus
prefix-and-suffix
4- — -0
.135
[3.43]
Ref.
34°
Retentive Leg
Retentive Leg
.050/.040 Dia. for straight
[1.27/1.02] leg headers
.050/.040 Dia. for straight
[1.27/1.02] leg headers
.002
0.05
.002
0.05
.037
[0.94
Dia. for retentive
] leg headers
.037
[0.94
Dia. for retentive
] leg headers
Edge of Board
Edge of Board
The correct ordering number is
X = .110 [2.79] min., .160 [4.06]
max. when mated with
MTA-100 Connector.
X = .110 [2.79] min., .120 [3.05]
4-641213-0
.100
[2.54]
Typ.
.130
[3.30]
Min.
X
.100
[2.54]
Typ.
All part numbers are the RoHS
equivalent version. Example:
max. when mated with
CST-100 II Connector.
Lead Free
No. of
Pos.
RoHS
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Prefix/Suffix
2
3-641213-2
thru
Note: Consult Product Drawing for details
on placing headers onto PC boards.
28
5-641213-8
See page 15 for an explanation of
RoHS lead free equivalents.
Base Part Numbers
Straight Posts
Without
Retentive Legs
Right-Angle Posts
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
With
Retentive Legs
Without
With
Retentive Legs
Retentive Legs
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
640455
641214
641125
Part Nos.
644877
—
Standard UL94V-0, Tin Plated
640454 2–28
644876
2–28
—
2–28
32–58
32–58
2–28
—
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Standard UL94V-0, .000030 [0.00076] Gold Plated
641213 32–58
Standard UL94V-0, .000015 [0.00038] Gold Plated
641124 32–58
—
—
—
—
—
23
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Friction Lock Headers—Straight and Right-Angle
Material and Finish
Housing —UL94V-0 rated, polyester,
white
Straight Post (.025 [0.64] Square)
Right-Angle Post (.025 [0.64] Square)
.225
[5.72]
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.225
[5.72]
.125
.125
[3.18]
[3.18]
A
Notes:
A
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.025
[0.64]
Sq.
.100
[2.54]
Typ.
.040
[1.02]
Max.
.025
[0.64]
Sq.
.040
[1.02]
Max.
.050
[1.27]
Typ.
.295
[7.49]
Post
No. 1
.310
[7.87]
Post
No. 1
3. All posts on retentive leg headers
are bent.
.295
.535
[7.49]
[13.59]
.310
4. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
[7.87]
.050
[1.27]
Typ.
.100
[2.54]
.100
[2.54]
Typ.
.140
[3.56]
.140
[3.56]
Ref.
.100
[2.54]
.140
[3.56]
Max.
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Header Ordering
Information
.125
[3.18]
Ref.
34°
The “Base Part Numbers”
Chart at right shows the base
part number.
.135
[3.43]
34°
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Retentive Leg
Retentive Leg
.050/.040 Dia. for straight
[1.27/1.02] leg headers
.050/.040 Dia. for straight
[1.27/1.02] leg headers
Base number 641215 plus
prefix-and-suffix
4- — -0
.002
0.05
.002
0.05
.037
[0.94
Dia. for retentive
]
leg headers
.037
[0.94
Dia. for retentive
] leg headers
Edge of Board
Edge of Board
The correct ordering number is
X = .110 [2.79] min., .160 [4.06]
max. when mated with
4-641215-0
.100
[2.54]
Typ.
All part numbers are the RoHS
equivalent version. Example:
.130
[3.30]
Min.
X
MTA-100 Connector.
X = .110 [2.79] min., .120 [3.05]
.100
[2.54]
Typ.
max. when mated with
CST-100 II Connector.
Lead Free
No. of
Pos.
Standard
Prefix/Suffix
RoHS
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Prefix/Suffix
2
641215-2 3-641215-2
thru
Note: Consult Product Drawing for details
on placing headers onto PC boards.
28
2-641215-8 5-641215-8
Base Part Numbers
See page 15 for an explanation of
RoHS lead free equivalents.
Straight Posts
Without
Retentive Legs
Right-Angle Posts
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
With
Retentive Legs
Without
Retentive Legs
With
Retentive Legs
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
640457
641216
641127
Part Nos.
644875
—
Standard UL94V-0, Tin Plated
640456 2–28
644874
2–28
—
2–28
32–58
32–58
2–28
—
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
Standard UL94V-0, .000030 [0.00076] Gold Plated
641215 32–58
Standard UL94V-0, .000015 [0.00038] Gold Plated
641126 32–58
—
—
—
—
—
24
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Headers with Retention Peg—Straight
Friction Lock
Material and Finish
Housing —UL94V-0 rated, thermo-
plastic, black
.113
[2.87]
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.250
[6.35]
.025-.040
[0.64-1.01]
A
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
Post No. 1
.290
.010
0.25
.010
[7.37
]
.347
[8.81
.010
0.25
.135
.550
[13.97
0.25
]
[3.43]
]
.125
[3.18]
.070
.100
[2.54]
.001
0.03
Typ.
.025
[0.64
[1.78]
.050
]
[1.27]
Square Typ.
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
Polarized
.113
[2.87]
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
.055
[1.39]
.250
[6.35]
Min.
A
Post No. 1
.010
.290
[7.37
0.25
]
.010
0.25
.347
[8.81
.135
[3.43]
.010
0.25
.550
]
[13.97
]
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
.125
[3.18]
.055
[1.40]
.100
[2.54]
.070
[1.78]
Typ.
.001
0.03
.050
[1.27]
.025
[0.64
]
Square Typ.
Base number 647609 plus
prefix-and-suffix
4- — -0
The correct ordering number is
.070
[1.78]
.100
[2.54]
Min.
4-647609-0
Typ.
.002
Ø .052
[1.32
0.05
]
All part numbers are the RoHS
equivalent version. Example:
Lead Free
No. of
Pos.
Standard
Prefix/Suffix
RoHS
Prefix/Suffix
.090
[2.29]
2
3
647609-2 3-647609-2
647609-3 3-647609-3
647609-4 3-647609-4
647609-5 3-647609-5
647609-6 3-647609-6
647609-7 3-647609-7
647609-8 3-647609-8
647609-9 3-647609-9
1-647609-0 4-647609-0
1-647609-1 4-647609-1
1-647609-2 4-647609-2
.003
0.07 ]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Ø .040
[1.02
4
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
5
6
7
8
Base Part Numbers
9
10
11
12
Friction Lock
Header
Part Nos.
Polarized
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Standard UL94V-0, Tin Plated
647609 32-42
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
647623
32-42
32-42
32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
647626 32-42 647624
Standard UL94V-0, .000015 [0.00038] Gold Plated
Note:
647627
32-42
647625
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
25
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 High Profile Headers—Right-Angle
Material and Finish
Friction Lock
Polarized
Housing —UL94V-0 rated, thermo-
plastic, black
Right-Angle Post (.025 [0.64] Square)
Right-Angle Post (.025 [0.64] Square)
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
A
Notes:
.250
[6.35]
.113
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.250
[6.35]
.113
[2.87]
[2.87]
.100
A
3. To determine header overall length
(dim. A) multiply .100 x the number
of posts. Example: .100 x 10 posts
equals 1.000 inch [25.4 mm].
4. This product can be mounted in
the middle of the PC Board as
shown in the PCB layout.
[2.54]
.025
.040
[1.02]
Max.
.070
[1.78]
.025
[0.64]
Sq.
[0.64]
Sq.
.050
[1.27]
Post No. 1
.290
.290
[7.37]
Post
No. 1
[7.37]
.347
.347
[8.81]
[8.81]
.112
[2.84]
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14, 15 and 31.
.050
[1.27]
.112
[2.84]
.125
[3.18]
.140
[3.56]
.100
[2.54]
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
.125
[3.18]
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with right-angle posts would be:
.100
[2.54]
Typ.
.003
.040
[1.02
Dia.
0.07
]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base number 647630 plus
prefix-and-suffix
4- — -0
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
The correct ordering number is
4-647630-0
All part numbers are the RoHS
equivalent version. Example:
Lead Free
No. of
Pos.
RoHS
Base Part Numbers
Prefix/Suffix
2
3
3-647630-2
3-647630-3
3-647630-4
3-647630-5
3-647630-6
3-647630-7
3-647630-8
3-647630-9
4-647630-0
4-647630-1
4-647630-2
Friction Lock
Right-Angle Posts
Polarized
Right-Angle Posts
4
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
5
6
Standard UL94V-0, Tin Plated
647630 32-42
7
647651
32-42
32-42
32-42
8
Standard UL94V-0, .000030 [0.00076] Gold Plated
647629 32-42 647653
Standard UL94V-0, .000015 [0.00038] Gold Plated
9
10
11
12
Note:
Select load headers (omitted pin
647628
32-42
647652
headers) are available upon request.
Please contact product engineer or
product manager for details.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
26
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Polarized High Temperature Headers—Straight and Right-Angle
Material and Finish
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
For use with Infrared Reflow Process
Straight Post (.025 [0.64] Square)
Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
Right-Angle Post (.025 [0.64] Square)
13–18 Position — UL94V-0 rated,
LCP, black
A
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.250
[6.35]
.113
.250
[6.35]
.113
[2.87]
[2.87]
Notes:
A
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.100
[2.54]
.100
[2.54]
.025
[0.64]
Sq.
.070
[1.78]
.025
[0.64]
Sq.
.070
[1.78]
.050
[1.27]
.050
[1.27]
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
.290
[7.37]
No. 1
Post
.290
[7.37]
Post
No. 1
.347
[8.81]
.347
[8.81]
.550
[13.97]
For mateability options, see
matrix on pages 12 and 13.
.125
.112
[2.84]
For mating half visuals, see
pages 14, 15 and 31.
[3.18]
.140
[3.56]
.135
.125
[3.18]
[3.43]
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
.008
[0.20]
Min. Thk. Solder
Paste In Area Shown
.100
.060
[2.54]
[1.52]
Pre-Tinned Land
Both Sides Typ.
Typ.
Post No. 1
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Base number 647047 plus
prefix-and-suffix
4- — -0
.040
[1.02]
Pre-Tinned Plated
Thru Hole Typ.
.300
[7.62]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
.150
[3.81]
The correct ordering number is
.0325
[0.826]
4-647047-0
All part numbers are the RoHS
equivalent version. Example:
.065
[1.65]
Lead Free
No. of
Pos.
Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board
RoHS
Prefix/Suffix
2
3-647047-2
thru
Base Part Numbers
12
13
4-647047-2
NA
Straight Posts
Straight Posts (Tube Loaded)
Right-Angle Posts
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
thru
18
NA
Standard UL94V-0, Tin Plated
See page 15 for an explanation of
RoHS lead free equivalents.
647047
32–42
647298
647300
647299
32–42
32–42
32–42
647048
647114
647076
32–42
32–42
32–42
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Standard UL94V-0, .000030 [0.00076] Gold Plated
647109
Standard UL94V-0, .000015 [0.00038] Gold Plated
647075 32–42
32–42
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
27
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Friction Lock High Temperature Headers—Straight and Right-Angle
Material and Finish
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
For use with Infrared Reflow Process
Straight Post (.025 [0.64] Square)
Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
Right-Angle Post (.025 [0.64] Square)
13–18 Position — UL94V-0 rated,
LCP, black
Posts — Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.250
[6.35]
.113
[2.87]
.250
[6.35]
.113
[2.87]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
A
A
.040
.040
[1.02]
Max.
.025
[1.02]
[0.64]
Sq.
.025
[0.64]
Sq.
Post No. 1
Max.
Post No. 1
.290
[7.37]
.290
[7.37]
.347
[8.81]
.347
[8.81]
.550
.112
[2.84]
[13.97]
.050
[1.27]
.050
[1.27]
.125
[3.18]
For mateability options, see
matrix on pages 12 and 13.
.125
[3.18]
.130
[3.30]
.100
[2.54]
.100
[2.54]
For mating half visuals, see
pages 14, 15 and 31.
.008
[0.20]
Min. Thk. Solder
Paste In Area Shown
.100
[2.54]
Typ.
.060
[1.52]
Pre-Tinned Land
Both Sides Typ.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with straight posts would be:
Post No. 1
.040
[1.02]
Pre-Tinned Plated
Thru Hole Typ.
.300
[7.62]
.150
[3.81]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Base number 647050 plus
prefix-and-suffix
4- — -0
.0325
[0.826]
.065
[1.65]
The correct ordering number is
4-647050-0
All part numbers are the RoHS
equivalent version. Example:
Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board
Lead Free
No. of
Pos.
Standard
Prefix/Suffix
RoHS
Prefix/Suffix
Base Part Numbers
2
647050-2 3-647050-2
thru
Straight Posts
Straight Posts (Tube Loaded)
Right-Angle Posts
Header
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
12
13
1-647050-2 4-647050-2
Part Nos.
Part Nos.
Part Nos.
647051
647117
647079
1-647050-3
thru
NA
Standard UL94V-0, Tin Plated
647050
32-42
647295
647297
647296
32-42
32-42
32-42
32-42
32-42
32-42
18
1-647050-8
NA
Standard UL94V-0, .000030 [0.00076] Gold Plated
See page 15 for an explanation of
RoHS lead free equivalents.
647116
Standard UL94V-0, .000015 [0.00038] Gold Plated
647078 32-42
32-42
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
28
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Polarized and Friction Lock Surface Mount Headers—Straight
Material and Finish
Housing —
2–12 Position — UL94V-0 rated,
nylon, black
For use with Infrared Reflow Process
Polarized Header
Maximum Temperature Rating: 2–12 Position: 280°C
13–18 Position: 235°C
Friction Lock Header
13–18 Position — UL94V-0 rated,
LCP, black
.113
.113
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
[2.87]
[2.87]
.318
[8.08]
Ref.
.318
[8.08]
Ref.
.250
.250
[6.35]
[6.35]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.025
[0.64]
Sq.
.025
[0.64]
Sq.
.070
[1.78]
.040
[1.02]
Max.
Post No. 1
Post No. 1
.290
.290
3. To determine header overall
length (dim. A) multiply .100 x the
number of posts. Example: .100
x 10 posts equals 1.000 inch
[25.4 mm].
[7.37]
[7.37]
.347
[8.81]
.347
[8.81]
.050
[1.27]
.050
[1.27]
.159
[4.04]
Typ.
.159
[4.04]
.125
[3.18]
.125
[3.18]
For mateability options, see
matrix on pages 12 and 13.
.100
[2.54]
.100
[2.54]
For mating half visuals, see
pages 14, 15 and 31.
.100
[2.54]
Typ.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Post No. 1
.060
[1.52]
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position sur-
face mount polarized header
would be:
Base number 647106 plus
prefix-and-suffix
4- — -0
.235
[5.97]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
.070
[1.78]
Recommended PC Board Layout for use with .010 [0.25] Thick Stencil
The correct ordering number is
Base Part Numbers
4-647106-0
Polarized Headers
Header
Part Nos.
Friction Lock Headers
All part numbers are the RoHS
equivalent version. Example:
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Lead Free
Standard UL94V-0, Tin Plated
647106 32-42
No. of
Pos.
RoHS
647166
32-42
32-42
32-42
Prefix/Suffix
2
3-647106-2
4-647106-2
Standard UL94V-0, .000030 [0.00076] Gold Plated
647108 32-42 647168
Standard UL94V-0, .000015 [0.00038] Gold Plated
647107 32-42 647167
12
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Tape Mount Part Numbers
Polarized Headers
Friction Lock Headers
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
Standard UL94V-0, Tin Plated
647531 32-42
647502
32-42
32-42
32-42
Standard UL94V-0, .000030 [0.00076] Gold Plated
1744163
Standard UL94V-0, .000015 [0.00038] Gold Plated
647467
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or
product manager for details.
29
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-100 Shrouded Headers—Straight and Right-Angle
Material and Finish
Right-Angle (.025 [0.64] Square)
Straight Post (.025 [0.64] Square)
Housing —UL94V-0 rated, polyester,
black
Posts—Copper alloy, tin plated; or
.000030 [0.00076] gold over nickel
Post No. 1
Post No. 1
Notes:
A
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers with .000015 [0.00038]
gold plated post are available
upon request. Minimums may
apply.
A
.313
[7.95]
.313
[7.95]
.410
[10.41]
.200
[5.08]
.410
[10.41]
.200
[5.08]
3. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.440
[11.18]
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
pages 14 and 15.
.130
[3.30]
.025
[0.64]
Typ.
.092
[2.34]
Typ. Ref.
.050
[1.27]
Max.
.025
[0.64]
Typ.
.140
[3.56]
.125
[3.18]
.100
[2.54]
.137
[3.48]
Ref.
.092
[2.34]
Typ. Ref.
.176
[4.47]
Ref.
.100
[2.54]
.176
[4.47]
Ref.
.107
[2.72]
Ref.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
with pegs would be:
Front Bend
.206
[5.23]
Ref.
Polarized
Retention Peg
.125
[3.18]
Min.
.300
[7.62]
Max.
.130
[3.30]
Ref.
.042
[1.07]
Edge of Board
Edge of Board
Rear Bend
Base number 644486 plus
prefix-and-suffix
4- — -0
.124
[3.15]
.100
[2.54]
Typ.
.050/.040
[1.27/1.02]
.050/.040
[1.27/1.02]
.100
[2.54]
Typ.
Dia.
Dia.
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
The correct ordering number is
4-644486-0
.081/.075
[2.06/1.91]
Dia.
See page 15 for an explanation of
RoHS lead free equivalents.
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
(Solder Side of Board Shown)
(Solder Side of Board Shown)
Base Part Numbers
Straight Posts
Right-Angle Posts
Without Pegs Only
Front Bend
With
Pegs
Without
Pegs
Notes:
Rear Bend
1. Select load headers (omitted pin
headers) are available upon
request. Please contact product
engineer or product manager for
details.
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
644803
—
Standard UL94V-0, Tin Plated
644486 22-34
644861
22-34
644488
644489
22-34
22-34
22-34
2. MTA-100 shrouded headers
do not mate with CST-100 II hous-
ings.
Standard UL94V-0, .000030 [0.00076] Gold Plated
644487 22-34
—
—
—
Header Length
No. of
Circuits
Dim.
A
Prefix/
Suffix
No. of
Circuits
Dim.
A
Prefix/
Suffix
No. of
Circuits
Dim.
A
Prefix/
Suffix
No. of
Circuits
Dim.
A
Prefix/
Suffix
.284
.684
1.084
1.484
37.69
2
3
4
5
3- -2
3- -3
3- -4
3- -5
6
3- -6
3- -7
3- -8
3- -9
10
4- -0
14
4- -4
7.21
17.37
27.53
.384
9.75
.784
19.91
1.184
30.07
7
8
9
11
12
13
4- -1
4- -2
4- -3
.484
12.29
.884
22.45
1.284
32.61
.584
14.83
.984
24.99
1.384
35.15
30
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.100 [2.54] Centerline CST-100 II Crimp Contacts and Housings
Product Facts
Application Tooling
Loose Piece Contacts —
Hand Tool No. 58517-3 (408-4064)
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
I Low cost wire-to-board
interconnections
I Wide wire range for single
contact
I Tin and gold plated
contacts
Applicator No. 567373-3
(Request Catalog 65828)
AMP-O-MATIC Stripper-Crimper
Machine* Applicator No. 567910-1 or
567827-1 (with CQM) (Request Catalog
65004)
AMPOMATOR CLS IIIG Lead Making
Machine* (Request Catalog 82659)
I Mates with specified MTA
and similar competitive
notched headers
I Plastic latching feature in
housing helps prevent con-
tact backout
*Requires applicators. For part
numbers, call Technical Support.
I Locking ramps and polariz-
ing tabs are standard
I For keying purposes use
keying plug 641994-1
(page 17)
.440
[11.17]
Contacts
.195
[4.95]
Part Numbers
15 Au Gold Plated
1375819-2 (Strip)
I Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Tin Plated
1375819-1 (Strip)
30 Au Gold Plated
1375819-3 (Strip)
1445336-1 (Loose Piece) 1445336-2 (Loose Piece) 1445336-3 (Loose Piece)
.016 .002
[.406 .051]
Material and Finish (RoHS Compliant)
I Certified by Canadian
Phosphor bronze, pretinned or .000015 [.00038] gold, over nickel
.000030 [0.00076] gold over nickel
Wire Range—22–26 AWG [0.35–0.13 mm2]
Max. Ins. Dia. —.065 [1.65]
Standards
®
Association,
File No. LR7189
For mateability options, see
matrix on pages 12 and 13.
Housing*
Material (RoHS Compliant)
UL94V-0 rated, nylon, white
For mating half visuals, see
pages 21 thru 29 and 32.
See page 15 for an explanation of
RoHS lead free equivalents.
No. of
Pos.
Dim.
A
Part
Numbers
No. of
Pos.
Dim.
A
Part
Numbers
.060
[1.52]
Typ.
.220
1.620
.100
[2.54]
Typ.
2
3
1375820-2
1375820-3
1375820-4
1375820-5
1375820-6
1375820-7
1375820-8
1375820-9
1-1375820-0
1-1375820-1
1-1375820-2
1-1375820-3
1-1375820-4
1-1375820-5
16
17
18
19
20
21
22
23
24
25
26
27
28
1-1375820-6
1-1375820-7
1-1375820-8
1-1375820-9
2-1375820-0
2-1375820-1
2-1375820-2
2-1375820-3
2-1375820-4
2-1375820-5
2-1375820-6
2-1375820-7
2-1375820-8
5.59
41.15
.320
8.13
1.720
43.69
.420
10.67
1.820
46.23
4
.520
13.21
1.920
48.77
5
Performance Data
Voltage Rating—250 vac
Current Rating —4 amp max.
Low-Level Resistance—6 m⍀
max. initial; 10 m⍀ max. final
Insulation Resistance—1000 M⍀
min. initial; 100 M⍀ min. final
Operating Temperature —
Ϫ55Њ C to ϩ105Њ C
.620
15.75
2.020
51.31
A
6
.720
18.29
2.120
53.85
.510
[12.95]
7
.820
20.83
2.220
56.39
8
.260
[6.60]
Ref.
.920
23.37
2.320
58.93
9
.190
[4.83]
1.020
25.91
2.420
61.47
10
11
12
13
14
15
1.120
28.45
2.520
64.01
1.220
30.99
2.620
66.55
Technical Documents
Product Specification
108-1948
Application Specification
114-13036
Instruction Sheet
408-8493
*Housings without polarizing tabs
may be manufactured upon
request. Minimums may apply.
Contact product engineering or
product manager for details.
1.320
33.53
2.720
69.09
1.420
36.07
2.820
71.63
1.520
38.61
31
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
CST-100 II Shrouded Headers—Straight and Right-Angle
Material and Finish
Straight Post (.025 [0.64] Square)
Right-Angle (.025 [0.64] Square)
Housing —UL94V-0 rated, polyester,
black
Posts—Copper alloy, tin plated; or
.000030 [0.00076] gold over nickel
Post No. 1
Post No. 1
Notes:
A
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Headers with .000015 [0.00038]
gold plated posts are available
upon request. Minimums may
apply.
A
.313
[7.95]
.313
[7.95]
3. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.280
[7.11]
.280
[7.11]
.410
[10.41]
.036
[0.91]
Max.
.520
[13.21]
For mateability options, see
matrix on pages 12 and 13.
For mating half visuals, see
page 31.
.140
[3.56]
.025
[0.64]
Typ.
.025
[0.64]
Typ.
.140
[3.56]
.125
[3.18]
.092
[2.34]
Typ.
.092
[2.34]
Ref.
.100
[2.54]
.100
[2.54]
.107
[2.72]
Ref.
.107
[2.72]
Ref.
.176
[4.47]
Ref.
.176
[4.47]
Ref.
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
Note: Consult Product Drawing for details
Polarized
Retention Peg
on placing headers onto PC boards.
.125
[3.18]
Min.
described headers.
.042
[1.07]
.450
[11.43]
Max.
Edge of Board
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight posts and
with pegs would be:
Edge of Board
.124
[3.15]
.100
[2.54]
Typ.
.050/.040
[1.27/1.02]
Dia.
.050/.040
.100
[2.54]
Typ.
Dia.
.081/.075
[2.06/1.91]
[1.27/1.02]
Dia.
Base number 644893 plus
prefix-and-suffix
4- — -0
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Recommended Mounting Hole Pattern for .062
[1.57] Thk. PC Board
(Solder Side of Board Shown)
(Solder Side of Board Shown)
The correct ordering number is
4-644893-0
Base Part Numbers
All part numbers are the RoHS
equivalent version. Example:
Straight Posts
Right-Angle Posts
Without Pegs Only
Lead Free
With
Pegs
Without
Pegs
No. of
Pos.
RoHS
Prefix/Suffix
No. of
Header
No. of
No. of
Posts/
Posts/
Header
Part Nos.
Header
Part Nos.
2
3-644893-2
thru
Part Nos.
Posts/
RoHS Equiv.
RoHS Equiv.
RoHS Equiv.
14
4-644893-4
Standard UL94V-0, Tin Plated
644893 32-44
644892
32-44
644894
644898
32-44
32-44
See page 15 for an explanation of
RoHS lead free equivalents.
Standard UL94V-0, .000030 [0.00076] Gold Plated
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
644897
32-44
644896
32-44
Header Length
No. of
Dim.
Prefix/
Suffix
No. of
Dim.
A
.584
14.83
Prefix/
Suffix
No. of
Dim.
A
.884
22.45
Prefix/
Suffix
Note:
Circuits
A
Circuits
Circuits
CST-100 II shrouded headers only
mate with CST-100 II housings. All
the MTA-100 headers except the
MTA-100 shrouded headers mate
with CST-100 II housings.
.284
7.21
2
3
4
3- -2
3- -3
3- -4
5
3- -5
3- -6
3- -7
8
9
3- -8
3- -9
4- -0
.384
9.75
.684
17.37
.984
24.99
6
7
.484
12.29
.784
19.91
1.084
27.53
10
32
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.156 [3.96] Centerline MTA-156 IDC Connectors and Headers
Product Facts
I Connectors and headers for
2 through 24 positions; wire
sizes of 18, 20, 22, 24 and
26 AWG [0.9–0.12 mm2]
I Connectors and headers,
except shrouded headers,
are end-to-end stackable
I Quad Connectors for higher
current rating (page 54)
I Posted connectors for 2,3,
4,6,9,12,15 and 24 posi-
tions
I Card edge connectors for
3,6,9,12,15,18 and 20
through 24 positions
I Connectors preloaded with
IDC contacts
I All contacts are slotted for
insulation displacement
(IDC) termination technique
I Connector styles include
both closed end and feed-
thru, with and without lock-
ing ramps and polarizing
tabs
MTA-156 connectors
accept discrete and ribbon
cable wire sizes ranging
from 18 – 26 AWG
The wire-to-post connector
housing material is flame
retardant thermoplastic,
either UL94V-2 or UL94V-0
rated.
Performance Data*
Voltage Rating —600 vac
Current Rating —
7 amp max. for MTA-156 Connector
Low-Level Resistance —
3.0 m⍀ max. initial
Dielectric Withstanding Voltage—
2200 vac/1 min.
Insulation Resistance—
5000 M⍀ min. initial
Operating Temperature—
Ϫ55Њ C to ϩ105Њ C
I Molded ribs on housing do
not allow reverse mating
2
I Contacts are lubricated for
fretting corrosion protection mum insulation outside
[0.9– 0.12 mm ] with maxi-
A full line of .156 [3.96]
diameter.095 [2.41] for sin-
centerline headers com-
pletes the system. Headers
are available with straight
or right-angle posts, in flat
friction lock and shrouded
styles. Headers are available
in 2 through 24 positions.
I Benefits derived from the
gle wire and .070 [1.78] for
MTA-156 system include
mass termination of wires.
increases quality and ease
Tin plated solid, fused
of handling such as—
stranded or stranded (7, 16,
I
I
I
I
I
I
One-step assembly
No wire stripping
No contact damage
Reduced wiring errors
Simpler tooling
Simple maintenance
and repair
and 19 strands) wire with
PVC insulation can be used
2
on 18 AWG [0.8 – 0.9 mm ]
MTA-156 connectors; 7, 10,
and 19 stranded wire on
*Refer to the Product Specification
for additional electrical, mechanical
and environmental performance
tests and requirements.
2
20 AWG [0.5 – 0.6 mm ]
MTA-156 connectors; and 7
and 19 stranded wire on
I Meets the material require-
ments of Table 23.1 of
UL 1410 Standards for
Television Receiver and
Video Products (wire-to-
post connectors only)
2
22 – 26 AWG [0.4 – 0.12 mm ]
MTA-156 connectors.
Only one wire to be termi-
nated into an IDC contact
slot.
Technical Documents
Product Specification
108-1051 MTA-156 Connectors
I Recognized under the
Component Program of
Underwriters
Mass termination of wire
provides the lowest applied
cost because it drastically
reduces the labor content
of virtually any cable or har-
ness assembly required.
Application Specifications
114-1020 MTA-156 Connectors,
Posted Connectors and
R
Laboratories Inc.,
File No. E28476
Card Edge Connectors
114-1032 MTA-156 Ribbon Cable
Assembly
Note: Refer to page 70 for approved
wire listings.
I Certified by Canadian
Standards
R
Association,
File No. LR7189
33
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector/
Header Mateability
Guide
640426
640427
640428
640429
640430
640431
640432
640433
640434
640435
640472
640473
640474
640475
640476
640477
640478
640479
640480
640481
640595
640599
640600
640601
640602
640604
640605
640606
640607
640608
641301
641302
641303
641304
641305
641306
641307
641308
641309
641310
643817
643818
643819
643820
643821
644082
644461
644462
644463
644464
644465
644466
644467
644468
644469
644470
644471
644472
644501
644502
644566
644567
644569
644570
644572
644783
644791
644860
644878
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Matrix for Tin Plated
Part Numbers
This matrix has been
prepared to assist you,
our customer, in defin-
ing the correct mating
halves for the MTA-156
header and connector
combination. Where a
“Y” is indicated the
combination is a valid
mating pair. Where an
“N” is indicated the
combination is not
acceptable for mating.
34
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
www.tycoelectronics.com
C. America: 57-1-254-4444
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector/Header Mateability Guide (Continued)
This matrix has been prepared to assist you, our customer, in defining the correct mating
halves for the MTA-156 header and connector combination. Where a “Y” is indicated the
combination is a valid mating pair. Where an “N” is indicated the combination is not
acceptable for mating.
Headers
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
641217
641218
641219
641220
641221
641222
641223
641224
641225
641226
641227
641228
641229
641230
641231
641232
641233
641234
641235
641236
644460
644662
644663
644687
644718
644720
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
Headers
641148
641149
641150
641151
641152
641153
641154
641155
641156
641157
641168
641169
641170
641171
641172
641173
641174
641175
641176
641177
644284
647478
647479
647496
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
35
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
www.tycoelectronics.com
C. America: 57-1-254-4444
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Connectors—Closed End
Material and Finish
Closed End with Locking Ramp
Housing —UL94V-2 rated, nylon,
see below for color; or UL94V-0 rated,
nylon, black
Contacts—Phosphor bronze, post tin
plated, .000030 [0.00076] or .000015
[.00038] post gold plated over nickel
.245
[6.22]
A
.097
[2.46]
.100
[2.54]
.325
[8.26]
.230
[5.84]
.355
[9.02]
.050
[1.27]
.156
.725
Typ.
[3.96]
[18.42]
Color Coding by Wire Size for
UL94V-2 Connectors
26 AWG —Blue
24 AWG—White
22 AWG—Red
20 AWG—Yellow
18 AWG—Orange
without Polarizing Tabs
.100
[2.54]
.258
[6.56]
All Wire Sizes in UL94V-0—
Black
.050
[1.27]
with Polarizing Tabs
Notes:
1. Only connectors with locking
ramp and without polarizing tabs
mate with posted connectors on
page 45.
2. Refer to pages 70 thru 74 for
approved wire listing.
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Closed End Connectors with Locking Ramp, see pages 45 thru 48,
50, 52, and 53, (49 and 51 Front Bend Headers Only).
3. For strain reliefs and dust covers,
see pages 40 and 41.
4. For keying plugs and panel
mount end caps, see page 42.
5. Other circuit sizes are available
upon request. Minimums
may apply.
6. Connector circuits can be
molded closed for keying pur-
poses. Minimums may apply.
7. Where no part numbers appear
in the chart, parts can be made
available upon request.
Closed End without Locking Ramp
.245
[6.22]
A
.047
[1.19]
Minimums may apply.
8. To determine connector overall
length (Dim. A), multiply .156 x
the number of circuits. Example:
.156 x 10 circuits equals 1.560
inches [39.62 mm].
.325
[8.26]
.355
[9.02]
.180
[4.57]
.050
[1.27]
.156
[3.96]
.725
Typ.
[18.42]
without Polarizing Tabs
.100
[2.54]
.258
[6.56]
.050
[1.27]
with Polarizing Tabs
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Closed End Connectors without Locking Ramp, see pages 46 thru 53.
36
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Connectors—Closed End (Continued)
Base Part Numbers
Connector Ordering
Information
Closed End with Locking Ramp
Closed End without Locking Ramp
Without Tabs With Tabs
Without Tabs
With Tabs
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described connec-
tors.
Connector Type
& Wire Size
Connector Connector
Connector
Connector
Part
Nos.
RoHS
Equiv.
Part
RoHS
Equiv.
Part
RoHS
Equiv.
Part
Nos.
RoHS
Equiv.
Nos.
Nos.
Standard UL94V-2, Tin Plated
18 AWG
640426
32–54
32–54
32–54
32–54
32–54
643817
643818
643819
643820
643821
32–54
32–54
32–54
32–54
32–54
640431
640432
640433
640434
640435
32–54
32–54
32–54
32–54
32–54
6444611
6444621
6444631
6444641
—
32–44
32–44
32–44
32–44
—
0.8–0.9 mm2
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position closed end con-
nector with locking ramp
and without polarizing tabs
for 18 AWG wire would be:
20 AWG
640427
640428
640429
640430
0.5–0.6 mm2
22 AWG
0.3–0.4 mm2
24 AWG
0.2 mm2
26 AWG
0.12–0.15 mm2
Tape Mounted on Reel UL94V-2, Tin Plated
18 AWG
640472
640473
640474
640475
640476
32–54
644878
—
32–54
—
640477
640478
640479
640480
640481
32–54
32–54
32–54
32–54
32–54
—
—
—
—
0.8–0.9 mm2
Base number 640426 plus
20 AWG
32–54
32–54
32–54
32–54
prefix-and-suffix
0.5–0.6 mm2
22 AWG
4- — -0
644783
—
32–54
—
6447911
—
32–44
—
0.3–0.4 mm2
The correct ordering number
is
24 AWG
0.2 mm2
26 AWG
—
—
—
—
0.12–0.15 mm2
4-640426-0
Standard UL94V-2, .000030 [0.00076] Gold Plated
18 AWG
All part numbers in bold face
are the RoHS equivalent
version. Example:
641217
641218
641219
641220
641221
32–54
32–54
32–54
32–54
32–54
6444601
6446631
6446621
—
32–42
32–42
32–42
—
641222
641223
641224
641225
641226
32–54
32–54
32–54
32–54
32–54
—
—
—
—
0.8–0.9 mm2
20 AWG
0.5–0.6 mm2
Lead Free
22 AWG
6446871
—
32–44
—
No. of
Pos.
0.3–0.4 mm2
RoHS
Prefix/Suffix
24 AWG
0.2 mm2
2
3-640426-2
3-640426-3
3-640426-4
3-640426-5
3-640426-6
3-640426-7
3-640426-8
3-640426-9
4-640426-0
4-640426-1
4-640426-2
4-640426-3
4-640426-4
4-640426-5
4-640426-6
4-640426-7
4-640426-8
4-640426-9
5-640426-0
5-640426-1
5-640426-2
5-640426-3
5-640426-4
3
26 AWG
—
—
—
—
0.12–0.15 mm2
4
5
Standard UL94V-2, .000015 [0.00038] Gold Plated
18 AWG
6
641148
641149
641150
641151
641152
32–54
32–54
32–54
32–54
32–54
6442841
—
32–42
—
641153
641154
641155
641156
641157
32–54
32–54
32–54
32–54
32–54
—
—
—
—
—
—
—
—
—
—
0.8–0.9 mm2
7
20 AWG
8
0.5–0.6 mm2
9
22 AWG
6474781
—
32–42
—
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
0.3–0.4 mm2
24 AWG
0.2 mm2
26 AWG
—
—
0.12–0.15 mm2
Standard UL94V-0, Tin Plated (Black in color)
18 AWG
6448601
—
32–42
—
—
—
—
6445021
6445011
32–42
32–42
6440821
6445661
32–42
32–42
0.8–0.9 mm2
22 AWG
—
0.3–0.4 mm2
1 Other circuit sizes are available upon request. Minimums may apply.
Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for
details. Minimums may apply.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
37
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Connectors—Feed-Thru
Material and Finish
Feed-Thru with Locking Ramp
Housing —UL94V-2 rated, nylon,
see below for color; or UL94V-0 rated,
nylon, black
Contacts—Phosphor bronze; post tin
plated, .000030 [.00076] or .000015
[.00038] post gold plated over nickel
.245
[6.22]
A
.100
[2.54]
.097
[2.46]
.325
[8.26]
.385
[9.78]
.230
[5.84]
.050
[1.27]
.725
[18.42]
.156
[3.96]
Color Coding by Wire Size for
UL94V-2 Connectors
Typ.
without Polarizing Tabs
26 AWG —Blue
24 AWG—White
22 AWG—Red
20 AWG—Yellow
18 AWG—Orange
.100
[2.54]
.258
[6.56]
All Wire Sizes in UL94V-0—
Black
Notes:
.050
[1.27]
1. Only connectors with locking
ramp and without polarizing tabs
mate with posted connectors on
page 45.
with Polarizing Tabs
2. Refer to pages 70 thru 74 for
approved wire listing.
For mateability options, see matrix on pages 34 and 35.
3. For strain reliefs and dust covers,
see pages 40 and 41.
4. For keying plugs and panel
mount end caps, see page 42.
5. Other circuit sizes are available
upon request. Minimums
may apply.
Mating half visuals for Feed–Thru Connectors with Locking Ramp, see pages 45 thru 48,
50, 52, and 53, (49 and 51 Front Bend Headers Only).
Feed-Thru without Locking Ramp
6. Connector circuits can be
molded closed for keying pur-
poses. Minimums may apply.
7. Where no part numbers appear
in the chart, parts can be made
available upon request.
.245
[6.22]
A
.047
[1.19]
Minimums may apply.
.325
[8.26]
.385
[9.78]
8. To determine connector overall
length (Dim. A), multiply .156 x
the number of circuits. Example:
.156 x 10 circuits equals 1.560
inches [39.62 mm].
.180
[4.57]
.050
[1.27]
.725
[18.42]
.156
[3.96]
Typ.
without Polarizing Tabs
.100
[2.54]
.258
[6.56]
.050
[1.27]
with Polarizing Tabs
For mateability options, see matrix on pages 34 and 35.
Mating half visuals for Feed–Thru Connectors without Locking Ramp, see pages 46 thru 53.
38
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Connectors—Feed-Thru (Continued)
Base Part Numbers
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the
base part number and num-
ber of circuits available for
the described connectors.
Feed-Thru with Locking Ramp
Feed-Thru without Locking Ramp
Without Tabs With Tabs
Without Tabs
With Tabs
Connector Type
& Wire Size
Connector Connector
Connector
Connector
Part
Nos.
RoHS
Equiv.
Part
RoHS
Equiv.
Part
RoHS
Equiv.
Part
Nos.
RoHS
Equiv.
Nos.
Nos.
Standard UL94V-2, Tin Plated
18 AWG
640599
32–54
32–54
32–54
32–54
32–54
6444651
6444661
6444671
6444681
—
32–44
32–44
32–44
32–44
—
640604
640605
640606
640607
640608
32–54
32–54
32–54
32–54
32–54
6444691
6444701
6444711
6444721
—
32–44
32–44
32–44
32–44
—
0.8–0.9 mm2
Prefixes and suffixes are
determined by the number
of circuit positions in the
connector. For example, the
complete part number for a
10-position feed-thru con-
nector with locking ramp
and without polarizing tabs
for 18 AWG wire would be:
20 AWG
640600
640601
640602
640595
0.5–0.6 mm2
22 AWG
0.3–0.4 mm2
24 AWG
0.2 mm2
26 AWG
0.12–0.15 mm2
Tape Mounted on Reel UL94V-2, Tin Plated
18 AWG
Base number 640599 plus
prefix-and-suffix
4- — -0
641302
641303
641304
641305
641301
32–54
—
—
—
—
—
—
—
—
—
—
641306
641307
641308
641309
641310
32–54
32–54
32–54
32–54
32–54
—
—
—
—
—
—
—
—
—
—
0.8–0.9 mm2
20 AWG
32–54
32–54
32–54
32–54
0.5–0.6 mm2
22 AWG
0.3–0.4 mm2
The correct ordering number
is
24 AWG
0.2 mm2
4-640599-0
26 AWG
0.12–0.15 mm2
Standard UL94V-2, .00003 [.00076] Gold Plated
18 AWG
The part numbers in bold
face are the RoHS equiva-
lent version. Example:
641227
641228
641229
641230
641231
32–54
32–54
32–54
32–54
32–54
6447181
—
32–44
—
641232
641233
641234
641235
641236
32–54
32–54
32–54
32–54
32–54
—
—
—
—
—
—
—
—
—
—
0.8–0.9 mm2
20 AWG
0.5–0.6 mm2
Lead Free
No. of
Pos.
RoHS
6447201
—
32–44
—
22 AWG
0.3–0.4 mm2
Prefix/Suffix
2
3-640599-2
3-640599-3
3-640599-4
3-640599-5
3-640599-6
3-640599-7
3-640599-8
3-640599-9
4-640599-0
4-640599-1
4-640599-2
4-640599-3
4-640599-4
4-640599-5
4-640599-6
4-640599-7
4-640599-8
4-640599-9
5-640599-0
5-640599-1
5-640599-2
5-640599-3
5-640599-4
24 AWG
0.2 mm2
3
26 AWG
4
—
—
0.12–0.15 mm2
5
Standard UL94V-2, .000015 [.00038] Gold Plated
18 AWG
6
641168
641169
641170
641171
641172
32–54
32–54
32–54
32–54
32–54
6474791
—
32–42
—
641173
641174
641175
641176
641177
32–54
32–54
32–54
32–54
32–54
—
—
—
—
—
—
—
—
—
—
7
0.8–0.9 mm2
8
20 AWG
0.5–0.6 mm2
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
6474961
—
32–42
—
22 AWG
0.3–0.4 mm2
24 AWG
0.2 mm2
26 AWG
—
—
0.12–0.15 mm2
Standard UL94V-0, Tin Plated
—
—
—
—
—
—
—
—
6445671
6445691
32–42
32–42
6445701
6445721
32–42
32–42
18 AWG
0.8–0.9 mm2
22 AWG
0.3–0.4 mm2
1 Other circuit sizes are available upon request. Minimums may apply.
Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for
details. Minimums may apply.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
39
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector Accessories
Strain Relief Covers
Dust Covers
Closed End Covers
Retention Dimple
.335
[8.51]
Material (RoHS Compliant)
.440
[11.18]
Strain Relief Covers —UL94V-2
rated, nylon, white
.440
[11.18]
.105
[2.67]
.335
[8.51]
Dust Covers —UL94V-0 rated,
polyester, white
.127
[3.23]
.130
[3.30]
A
A
Base Part Numbers
Closed End
Strain Relief
Covers
Dust
Covers
Cover
Part Nos.
No. of
Circuits
Cover
Part Nos.
No. of
Circuits
Note: This portion of front locking bar
643067
2–24
640551
2–24
may or may not be present
Strain Relief Covers
Feed-Thru Covers
Dust Covers
Retention Dimple
Material (RoHS Compliant)
Strain Relief Covers —UL94V-2
rated, nylon, white
.470
[11.94]
.475
[12.07]
.325
[8.26]
Dust Covers —UL94V-0 rated,
polyester, white
.127
[3.23]
.130
[3.3]
A
A
Base Part Numbers
Feed-Thru
Strain Relief
Covers
Dust
Covers
Cover
Part Nos.
No. of
Circuits
Cover
Part Nos.
No. of
Circuits
Note: This portion of front locking bar
may or may not be present
643071
2–24
640643
2–24
Cover Ordering Information
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
Cover Length
No. of
Circuits
Dim.
Prefix/
Suffix
No. of
Dim.
A
1.560
39.62
Prefix/
No. of
Dim.
A
Prefix/
Suffix
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for a
10-position closed-end
A
Circuits
Suffix
Circuits
.312
2.808
71.32
2
3
4
5
6
7
8
9
-2
-3
-4
-5
-6
-7
-8
-9
10
11
12
13
14
15
16
17
1- -0
18
19
20
21
22
23
24
1- -8
1- -9
2- -0
2- -1
2- -2
2- -3
2- -4
7.92
.468
11.89
1.716
43.59
2.964
75.29
1- -1
1- -2
1- -3
1- -4
1- -5
1- -6
1- -7
.624
15.85
1.872
47.55
3.120
79.25
strain relief cover would be:
.780
19.81
2.028
51.51
3.276
83.21
Base number 643067 plus
prefix-and-suffix
1- — -0
.936
23.77
2.184
55.47
3.432
87.17
1.092
27.74
2.340
59.44
3.588
91.14
1.248
31.7
The correct ordering number
is
2.496
63.4
3.744
95.1
1.404
35.66
2.652
67.36
1-643067-0
40
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector Accessories (Continued)
.125
[3.18]
Replacement IDC Contacts
Material and Finish
Part Numbers
Tin Plated .000030 [0.00076] .000015 [0.00038]
Wire Size
2
AWG
mm
Gold Plated
641143-4
641144-4
641145-4
641146-4
641147-4
Gold Plated
641143-3
641144-3
641145-3
641146-3
641147-3
Contacts—Phosphor bronze, post tin
plated; .000030 [0.00076] or .000015
[0.00038] post gold plated over nickel
.637
[16.18]
18
20
22
24
26
0.8–0.9
0.5–0.6
0.3–0.4
0.2
640631-3
640632–3
640633-3
640634-3
640635-3
Note: Tyco Electronics does not rec-
ommend terminating an MTA
contact more than one time.
Use replacement contacts
when required for field repairs
or wire changes.
0.12–0.15
Crimp Snap-in Contacts
Material and Finish
Wire Size
Part Nos.
Loose Piece*
640557-3
.580
[14.73]
2
AWG
mm
Strip**
640556-3
640558-3
26–22 .12–0.3
22–18 0.3–0.9
640559-3
.105
[2.67]
Contacts—Phosphor bronze,
tin plated
**Hand Tool No. 59837-1 (408-6528)
**AMP-O-LECTRIC Model “G” Termination
Machine (Request Catalog 65828)
Note: Requires applicator. For part number,
call Technical Support.
.165
[4.19]
.110
[2.79]
Max.
Special applications for crimp snap-in contacts are:
1. Double wire per contact
2. Coax or shielded wire
3. Mixed wire size in same connector
Note: Only one crimp snap-in contact per connector.
41
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Connector Accessories (Continued)
Loose Piece
On Carrier Strip
Keying Plugs
Part No. 640629-1 (Flush)
Used with keyed headers
Part No. 641623-1 (Flush)
(10 per strip)
Material (RoHS Compliant)
UL94V-2 rated, nylon, natural color
.300
[7.62]
.500
[12.70]
Ref.
.066
[1.68]
.065
[1.65]
Note: Removal of contact is not
necessary when using keying plug.
.051
[1.30]
.085
[2.16]
Flush
2.525
[64.14]
Ref.
Part No. 640630-1 (Long Nose)
Used with staked post
.300
[7.62]
.375
[9.52]
.051
[1.30]
.300
[7.62]
Ref.
.065
[1.65]
.125
[3.18]
.070
[1.78]
.066
[1.68]
Dia.
Long Nose
Panel Mount End Caps
Part No. 641440-1
Part No. 641533-1
(2-position only)
Material (RoHS Compliant)
UL94V-2 rated, nylon, black
.564
[14.33]
.550
.410
[13.97]
[10.41]
Notes:
1. Both left-hand and right-hand
end caps are attached by a con-
necting tab. This tab must be
broken off prior to installing on
connector.
.440
[11.18]
.520
[13.2]
.440
[11.18]
2. For best results attach panel
mount end caps to the MTA-156
(IDC) connectors shown on pages
36 thru 39. While not preferred,
panel mount end caps can be
attached to MTA-156 (IDC)
.520
[13.2]
3- thru 24-Position
641440-1
Two-Position Only
641533-1
posted connector on page 45.
See Note 1
No. of
Pos.
Dim.
A
.578
[14.7]
.736
A
3
4
18.69
.892
22.66
1.204
6
.010
[.254]
Max. R. Typ. at Min.
Tolerance Cutout
30.58
.010
[.254]
Max. R. Typ.
at Min.
Tolerance
Cutout
.453
[11.5]
.453
[11.5]
1.672
42.47
9
2.140
54.36
12
15
24
2.608
66.24
4.012
101.9
Recommended Panel Cutout
(Recommended Panel Thickness .062 [1.57] to .067 [1.70] max.)
42
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Posted
Connectors
MTA-156 Posted
Connector/Connector
Mateability Guide
640426
640427
640428
640429
640430
640431
640432
640433
640434
640435
640472
640473
640474
640475
640476
640477
640478
640479
640480
640481
640595
640599
640600
640601
640602
640604
640605
640606
640607
640608
641301
641302
641303
641304
641305
641306
641307
641308
641309
641310
643817
643818
643819
643820
643821
644082
644461
644462
644463
644464
644465
644466
644467
644468
644469
644470
644471
644472
644501
644502
644566
644567
644569
644570
644572
644783
644791
644860
644878
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
Matrix for Tin Plated
Part Numbers
This matrix has been pre-
pared to assist you, our
customer, in defining the
correct mating halves for
the MTA-156 posted con-
nector and connector com-
bination. Where a “Y” is
indicated the combination
is a valid mating pair.
Where an “N” is indicated
the combination is not
acceptable for mating.
43
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Posted Connector/Connector Mateability Guide (Continued)
This matrix has been prepared to assist you, our customer, in defining the correct mating
halves for the MTA-156 posted connector and connector combination. Where a “Y” is indi-
cated the combination is a valid mating pair. Where an “N” is indicated the combination is
not acceptable for mating.
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Posted Connectors
641217
641218
641219
641220
641221
641222
641223
641224
641225
641226
641227
641228
641229
641230
641231
641232
641233
641234
641235
641236
644460
644662
644663
644687
644718
644720
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
Posted Connectors
641148
641149
641150
641151
641152
641153
641154
641155
641156
641157
641168
641169
641170
641171
641172
641173
641174
641175
641176
641177
644284
647478
647479
647496
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
44
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru
Closed End
Feed-Thru
Material and Finish
Housing —UL 94V-2 rated, nylon,
see chart for color
Contacts—Copper alloy, post tin or
.000030 [.00076] gold plated over
nickel
B
Dim.
B
Dim.
.105
[2.67]
1.010
[25.65]
.010
0.25
.105
[2.67]
1.010
[25.65]
A Dim.
.010
0.25
[
]
A Dim.
[
]
.156
.156
[3.96]
.487
[12.37]
Ref.
[3.96]
.487
[12.37]
Ref.
.370
[9.4]
.385
[9.78]
.370
[9.4]
.355
[9.02]
.045
[1.14] Sq.
.045
[1.14] Sq.
Notes:
Base Part Numbers
1. Mating half visuals - pages 36 thru 39.
2. Strain relief & dust covers - pages 40
& 41.
Closed End Connector1
Feed-Thru Connector1
Connector Type
& Wire Size
Part Nos.
RoHS Equiv.
Part Nos.
RoHS Equiv.
3. Approved wire listing - page 70.
Standard UL 94V-2, Tin Plated
Connector Ordering
Information
The “Base Part Numbers” Chart
at right shows the base part
number and number of circuits
available for the described
connectors.
18 AWG
641435
641436
641437
641438
641439
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
641522
641523
641524
641525
641526
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
0.8-0.9 mm2
20 AWG
0.5-0.6 mm2
22 AWG
0.3-0.4 mm2
24 AWG
0.2 mm2
Prefixes and suffixes are deter-
mined by the number of circuit
positions in the connector. For
example, the complete part
number for a 12-position
closed end connector for
18 AWG wire would be:
26 AWG
0.12-0.15 mm2
Standard UL 94V-2, .000030 [0.00076] Gold Plated
18 AWG
644807
32, 33, 34, 36, 39, 42, 45, 54
644812
32, 33, 34, 36, 39, 42, 45, 54
0.8-0.9 mm2
20 AWG
2
2
—
—
—
—
0.5-0.6 mm2
Base number 641435 plus
prefix-and-suffix
4- — -2
22 AWG
644809
32, 33, 34, 36, 39, 42, 45, 54
644814
32, 33, 34, 36, 39, 42, 45, 54
0.3-0.4 mm2
24 AWG
2
2
—
—
—
—
—
—
0.2 mm2
The correct ordering number is
26 AWG
2
2
—
—
0.12-0.15 mm2
4-641435-2
See page 15 for an explanation of
RoHS lead free equivalents.
Standard UL 94V-2, .000015 [0.00038] Gold Plated
18 AWG
647476
643995
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
647481
647497
32, 33, 34, 36, 39, 42, 45, 54
32, 33, 34, 36, 39, 42, 45, 54
0.8-0.9 mm2
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
22 AWG
0.3-0.4 mm2
1 MTA-156 Posted Connectors (Closed End and Feed-Thru) will Only mate with MTA-156 connectors with locking
ramp and without polarizing tabs. They will NOT mate with MTA-156 Quad Connectors.
2
Parts can be made available upon request. Minimums may apply.
Color Coding by Wire Size
for UL 94V-2 Connectors
18 AWG —Orange
20 AWG—Yellow
22 AWG—Red
Dim.
Dim.
No. of
Circuits
No. of
Prefix/
Suffix
Suffix
-2
Circuits
A
B
A
B
.468
.316
1.560
39.62
2.028
51.51
2.496
63.40
3.900
99.06
1.408
35.76
2
3
4
6
9
-9
11.89
8.03
.624
15.85
.780
19.81
1.092
27.74
.472
11.99
.628
15.95
.940
23.88
1.876
-3
-4
-6
12
15
24
1- -2
1- -5
2- -4
47.65
24 AWG—White
26 AWG—Blue
2.344
59.54
3.748
95.20
Performance Data
Voltage Rating —600 VAC
Current Rating —7 amp max.
Low-Level Resistance —
7 m⍀ max. initial
Dielectric Withstanding Voltage—
1500 VAC/1 min.
Insulation Resistance—
5000 M⍀ min. initial
Operating Temperature —
-55Њ C to ϩ105Њ C
Replacement IDC Contacts
Technical Documents
Product Specification
108-1065 MTA-156 Posted
Connector
Wire Size
AWG
mm2
Part
Numbers
Material and Finish
18
20
22
24
26
0.8-0.9
0.5-0.6
0.3-0.4
0.2
3-641425-1
3-641426-1
3-641427-1
3-641428-1
Contacts—Copper alloy, post tin
.126
[3.20]
plated over nickel
Application Specification
114-1020 MTA-156 Connectors,
Posted Connectors and
0.12-0.15 3-641429-1
.840
[21.34]
.045
[1.14]
Sq.
.100
[2.54]
Card Edge Connectors
45
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Flat Headers—Straight
Material and Finish
Housing —UL94V-0 rated, polyester,
white
.250
[6.35]
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.125
[3.18]
A
.156
[3.96]
Typ.
Notes:
.045
[1.14]
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
.078
[1.98]
Typ.
.450
[11.43]
Ref.
Post No. 1
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.36-
3.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
.125
[3.18]
Solder tail
Length
(See Chart)
.140
[3.56]
Min.
Edge of Board
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, see
pages 36 thru 39, 55, 60 and 62.
PC Board Hole Diameters
.156
[3.96]
Square
Post
Round
Post
.080/.070
[2.03/1.78]
.070/.060
[1.78/1.52]
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Header Ordering
Information
Note: Consult Product Drawing for details
on placing headers onto PC boards.
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
Base number 640383 plus
prefix-and-suffix
4- — -0
Base Part Numbers
Square Posts
Round Posts
.125 [3.18]
Solder tail
.175 [4.45]
Solder tail
.125 [3.18]
Solder tail
.175 [4.45]
Solder tail
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
640384
641203
641114
Part Nos.
644750
644757
644764
Standard UL94V-0, Tin Plated
640383 2–24
644749
2–24
32–54
32–54
2–24
2–24
32–54
32–54
Standard UL94V-0, .000030 [0.00076] Gold Plated
641202 32–54 644756
Standard UL94V-0, .000015 [0.00038] Gold Plated
641113 32–54 644763
The correct ordering number is
32–54
32–54
4-640383-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
Lead Free
No. of
Pos.
RoHS
Prefix/Suffix
2
3-640383–2
thru
24
5-640383-4
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
46
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Flat Headers—Right-Angle
.156
[3.96]
Typ.
Material and Finish
Housing —UL94V-0 rated, polyester,
white
.045
[1.14]
Sq.
.078
[1.98]
Typ.
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
Post No. 1
.125
[3.18]
Notes:
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.36-
3.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
.250
[6.35]
A
.100
[2.54]
.125
[3.18]
.390
[9.91]
Solder tail
Length
(See Chart)
Edge of Board
.015
0.38
.390
[9.91
For mateability options, see
matrix on pages 34, 35, 54
and 58.
X
]
.156
[3.96]
For mating half visuals, see
pages 36 thru 39, 55, 60 and 62.
.080/.070
[2.03/1.78]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
Header Ordering
Information
.125
[3.18]
16°
X = .140 [3.56] Min., .430 [10.92] Max.
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
Retentive Leg
when mated with MTA Connector.
Edge of Board
X = .140 [3.56] Min. when mated with
SL-156 Wire-to-Board Connector.
Y
described headers.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
.002
0.05
Ø .063
[1.60
Typ.
.156
[3.96]
]
Typ.
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Recommended Mounting Hole Pattern for .063 [1.60]
Thk. PC Board for Retentive Leg Header
Y = .140 [3.56] Min., .430 [10.92] Max. when mated with
MTA Connector.
Base number 641204 plus
prefix-and-suffix
4- — -0
Base Part Numbers
Square Posts
.125 [3.18] Solder tail
The correct ordering number is
4-641204-0
Retentive Leg
.175 [4.45] Solder tail
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
The part numbers in bold face
are the RoHS equivalent ver-
sion. Example:
Part Nos.
Part Nos.
Standard UL94V-0, Tin Plated
647646 2–12
Standard UL94V-0, .000030 [0.00076] Gold Plated
640385
641204
641115
2–24
32–54
32–54
644751
644758
644765
2–24
32–54
32–54
Lead Free
No. of
Pos.
RoHS
Prefix/Suffix
—
—
2
3-641204–2
thru
Standard UL94V-0, .000015 [0.00038] Gold Plated
24
5-641204-4
—
—
See page 15 for an explanation of
RoHS lead free equivalents.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
47
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Friction Lock Headers—Straight
.180
[4.57]
Material and Finish
Housing —UL94V-0 rated, polyester,
white
.300
[7.62]
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
A
Notes:
.045
[1.14]
.156
[3.96]
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Gold headers are duplex plated,
gold on mating end of post and
tin on the solder tail.
Typ.
Typ.
Y
.078
[1.98]
.450
[11.43]
Post No. 1
Ref.
3. .125 [3.18] solder tail lengths are
for .062 [1.57] thick printed circuit
boards and .175 [4.45] solder tail
lengths are for .093-.125 [2.36-
3.18] thick printed circuit boards.
4. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
.425
[10.8]
Y = .068 [1.73] Max. 2-8
position tin plated and
2–24 position gold
plated headers.
.125
[3.18]
Y = .073 [1.85] 9-24 position
tin plated headers.
Solder tail
Length
(See Chart)
.175
[4.45]
Min.
Edge of Board
.068
[1.7]
For mateability options, see
matrix on pages 34, 35, 54
and 58.
.156
For mating half visuals, use
connectors with a locking ramp
for polarization/retention pur-
poses, see pages 36 thru 39,
55, 60 and 62.
[3.96]
.400
[10.16]
Recommended Mounting Hole Pattern for
.062 [1.57] Thk. PC Board
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 55, 60 and 62.
PC Board Hole Diameters
Square
Post
Round
Post
3°
16°
.080/.070
.070/.060
Retentive Leg
Header Ordering
Information
[2.03/1.78]
[1.78/1.52]
Note: Consult Product Drawing for details
on placing headers onto PC boards.
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
described headers.
Base Part Numbers
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with square posts and a .125
[3.18] solder tail length would be:
Base number 641208 plus
prefix-and-suffix
4- — -0
Square Posts
.125 [3.18]
Solder tail
Header
Part Nos.
Round Posts
Retentive
Leg
.175 [4.45]
Solder tail
.125 [3.18]
Solder tail
Header
Part Nos. Equiv.
.175 [4.45]
Solder tail
Header
RoHS
Equiv.
RoHS
Header
RoHS
RoHS
Header
RoHS
Equiv.
Part Nos.
Equiv.
Part Nos. Equiv.
Part Nos.
644753
644760
644767
Standard UL94V-0, Tin Plated
1744017 2-12 640445
2–24
644752
644759
644766
2–24
32–54
32–54
640388
641209
641120
2–24
32–54
32–54
2–24
32–54
32–54
Standard UL94V-0, .000030 [0.00076] Gold Plated
641208 32–54
Standard UL94V-0, .000015 [0.00038] Gold Plated
641119 32–54
—
—
The correct ordering number is
4-641208-0
—
—
The part numbers in bold
face are the RoHS equivalent
version. Example:
Lead Free
No. of
Pos.
Standard
Prefix/Suffix
RoHS
Prefix/Suffix
2
641208–2 3-641208–2
thru
Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not
available, please contact Product Engineering to expedite your request.
24
2-641208-4 5-641208-4
Note:
See page 15 for an explanation of
RoHS lead free equivalents.
Select load headers (omitted pin headers) and tube loaded product are available upon request. Please contact product
engineer or product manager for details.
48
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Friction Lock Headers—Right-Angle
Material and Finish
Housing —UL94V-0 rated, polyester,
white
.180
[4.57]
Posts—Copper alloy, tin plated,
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.300
[7.62]
Y = .068 [1.73] Max. 2-8
position tin plated and
2–24 position gold
plated headers.
Notes:
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
Y = .073 [1.85] 9-24 position
A
tin plated headers.
.156
[3.96]
2. Gold headers are duplex plated, gold
on mating end of post and tin on the
solder tail.
3. .125 [3.18] solder tail lengths are for
.062 [1.57] thick printed circuit boards
and .175 [4.45] solder tail lengths are
for .093-.125 [2.36-3.18] thick printed
circuit boards.
4. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
Typ.
.045
[1.14]
Sq.
Y
Y
.078
[1.98]
Typ.
.450
[11.43]
Post No. 1
.425
.425
[10.8]
[10.8]
For mateability options, see
matrix on pages 34, 35, 54
and 58.
.157
[3.99]
.125
[3.18]
When using Front Bend
.212
[5.38]
Solder tail
Length
(See Chart)
Headers — for mating half
Edge of Board
visuals use connectors with a
locking ramp for polarization/
retention purposes. When using
Rear Bend Headers—for mating
half visuals use connectors with-
out a locking ramp. For polariza-
tion purposes only see pages
36 thru 39, 55, 60 and 62.
X
Front Bend
Rear Bend
X = .500 [12.7] Min., .650 [16.51]
Max., when mated with
X = .325 [8.26] Min., .400 [10.16]
Max., when mated with
MTA Connector.
X = .325 [8.26] Min., .345 [8.76]
Max., when mated with
SL-156 Connector.
.156
[3.96]
MTA Connector.
.080/.070
[2.03/1.78]
X = .500 [12.7] Min., when mated
with SL-156 Connector.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
Note: Consult Product Drawing for details
on placing headers onto PC boards.
Base Part Numbers
Square Posts
described headers.
Prefixes and suffixes are
Front Bend
Rear Bend
.125 [3.18]
Solder tail
.175 [4.45]
Solder tail
.125 [3.18]
Solder tail
Header
.175 [4.45]
Solder tail
determined by the number
of post positions in the header.
For example, the complete part
number for a 10-position header
with square posts, front bend,
and a .125 [3.18] solder tail
length would be:
Base number 641210 plus
prefix-and-suffix
4- — -0
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
640387
641207
641118
Part Nos.
644755
644762
644769
Standard UL94V-0, Tin Plated
640389 2–24
644754
2–24
32–54
32–54
2–24
32–54
32–54
2–24
32–54
32–54
Standard UL94V-0, .000030 [0.00076] Gold Plated
641210 32–54 644761
Standard UL94V-0, .000015 [0.00038] Gold Plated
641121 32–54 644768
The correct ordering number is
4-641210-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
Lead Free
No. of
Pos.
Standard
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
RoHS
Prefix/Suffix
Prefix/Suffix
641210–2 3-641210–2
thru
2
24
2-641210-4 5-641210-4
Note:
See page 15 for an explanation of
RoHS lead free equivalents.
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
49
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Polarized Lock Headers—Straight
Material and Finish
Housing —UL94V-0 rated, polyester,
white
.210
[5.33]
Posts—Copper alloy, tin plated or
.000030 [0.00076] gold over nickel
90° Ref.
Typ.
Retention Tabs
4 Plc.
Notes:
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Peg holes are not required in
PC Boards when headers without pegs
are used.
3. One peg only on a 2 position header,
other position sizes have two pegs.
4. Headers with .00015 [0.00038] gold
plated post are available upon request.
Minimums may apply.
5. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
A
Polarized
Retention Peg
.156
[3.96]
Typ.
.073
[1.85]
.045
[1.14]
.076
[1.93]
Post No. 1
.450
[11.43]
.125
[3.18]
.545
[13.84]
.100
[2.54]
.425
[10.80]
.125
[3.18]
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
connectors with a locking ramp
for polarization/retention pur-
poses, see pages 36 thru 39,
55, 60 and 62.
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 60 and 62.
Polarized
Retention Peg
Peg Hole
.066/.062
[1.68/1.57]
Dia.
.225
[5.72]
Min.
Edge of Board
PC Board Hole Diameters
Square
Post
.069/.065
[1.75/1.65]
Round
Post
.054/.050
[1.37/1.27]
.167
[4.24]
.078
[1.98]
.156
[3.96]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
Base Part Numbers
described headers.
Square Posts
Round Posts
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with square posts with
pegs would be:
Without Pegs
Header
Part Nos.
With Pegs
Without Pegs
With Pegs
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
644612
644628
Part Nos.
644616
644632
Standard UL94V-0, Tin Plated
644611 32–48
644615
32–48
32–48
32–48
32–48
32–48
32–48
Standard UL94V-0, .000030 [0.00076] Gold Plated
644627 32–48 644631
Base number 644615 plus
prefix-and-suffix
4- — -0
The correct ordering number is
4-644615-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Lead Free
No. of
Pos.
RoHS
Prefix/Suffix
2
3-644615–2
thru
Note:
18
4-644615-8
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
See page 15 for an explanation of
RoHS lead free equivalents.
50
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Polarized Lock Headers—Right-Angle
Material and Finish
Housing —UL94V-0 rated, polyester,
90° Ref.
Typ.
white
Retention Tabs
4 Plc.
Posts—Copper alloy, tin plated or
.000030 [0.00076] gold over nickel
Notes:
Polarized
1. Post(s) can be omitted for keying
purposes. Specify the desired
post(s) to be omitted using the
figure to identify Post No. 1.
2. Peg holes are not required in PC
Boards when headers without
pegs are used.
Retention Peg
A
.100
[2.54]
.073
[1.85]
Typ.
.210
[5.33]
Typ.
Ref.
.156
[3.96]
Typ.
.076
[1.93]
Typ.
.045
[1.14]
Sq.
3. One peg only on a 2 position
header, other position sizes have
two pegs.
4. Headers with .00015 [0.00038]
gold plated post are available
upon request. Minimums may
apply.
5. To determine header overall
length (Dim. A), multiply .156 x
the number of posts. Example:
.156 x 10 posts equals 1.560
inches [39.62 mm].
Post No. 1
.450
[11.43]
.545
[13.84]
.125
[3.18]
.200
[5.08]
Typ.
.205
[5.21]
Typ.
.125
[3.18]
.125
[3.18]
.425
[10.80]
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, use
only connectors with a locking
ramp for polarization/retention
purposes, see pages 36 thru
39, 55, 60 and 62.
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 60 and 62.
Front Bend
Rear Bend
Front Bend
Rear Bend
Reg. Hole
.066/.062 Dia.
[1.68/1.57]
X = .350 [8.89] Min., .825 [20.96]
Max., when mated with
X = .500 [12.7] Min., .700 [17.78]
Max., when mated with
MTA Connector.
Edge of Board
MTA Connector.
X = .350 [8.89] Min. when mated
X = .500 [12.7] Min., when
x
with SL-156 Connector.
mated with SL-156
Connector.
.069/.065
[1.75/1.65]
.239
[6.07]
.078
[1.98]
.156
[3.96]
Note: Consult Product Drawing
for details on placing headers
onto PC boards.
Recommended Mounting Hole Pattern
for .062 [1.57] Thk. PC Board
Header Ordering
Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
Base Part Numbers
Square Posts
With Pegs
Front Bend
Rear Bend
Without Pegs
described headers.
Without Pegs
Header
Part Nos.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with front bend and
with pegs would be:
Base number 644617 plus
prefix-and-suffix
4- — -0
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
644617
644633
Part Nos.
Standard UL94V-0, Tin Plated
644613 32–48
Standard UL94V-0, .000030 [0.00076] Gold Plated
644629 32–48
32–48
32–48
644614
644630
32–48
32–48
The correct ordering number is
4-644617-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Lead Free
No. of
Pos.
RoHS
Prefix/Suffix
2
3-644617–2
thru
Note:
18
4-644617-8
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
See page 15 for an explanation of
RoHS lead free equivalents.
51
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Friction Lock High Temperature Headers—Straight
Material and Finish
For use with Infrared Reflow Process
Housing —UL94V-0 rated, nylon, black
Posts—Copper alloy, tin plated,
.000015 [0.00038] gold over nickel
Temperature—Maximum
Temperature Rating: 280°C
Notes:
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
2. Gold headers are duplex plated, gold
on mating end of post and tin-lead on
the solder tail.
3. Headers with straight and right-angle
square posts are available upon
request. Minimums may apply.
4. To determine header overall length
(Dim. A), multiply .156 x the number of
posts. Example: .156 x 10 posts equals
1.560 inches [39.62 mm].
A
+ .005
– .010
+0.13
.073
[1.58
.156
[3.96]
Typ.
Typ.
.210 Ref.
[5.33] yTp.
]
.003
.001
.076
[1.93
–02. 5
Ø .045
[1.14
Ref.
0.08
]
0.03
]
2 Plcs.
Mating
End
Post No. 1
.450
[11.43]
Ref.
.010
0.25
.545
[138.4
.010
.025
.700
[17.78
.125
[3.18]
]
]
Solder tail
For mateability options, see
matrix on pages 34, 35, 54
and 58.
.010
.025
.335
.125
1[.3 8
[8.51]
]
.425
[10.80]
For mating half visuals, use
connectors with a locking ramp
for polarization/retention pur-
poses, see pages 36 thru 39,
55, 60 and 62.
.156
Typ.
[3.96]
For polarizing purposes only
use connectors without a lock-
ing ramp. See pages 36 thru
39, 60 and 62.
.120
Typ.
[3.05]
.008
[0.20]
Min. Thick Solder Paste
in Area Shown
Position No. 1
Header Ordering
Information
.120
Typ.
[3.05]
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
.010
0.25
.650
[16.51
Solder Paste Area
]
.003
0.08
.057
[1.45
]
described headers.
Pretinned Plated
Thru Hole Typ.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position header
with round tin plated posts:
Base number 647648 plus
prefix-and-suffix
4- — -0
.100
[2.54]
Pretinned Land
(Both Sides) Typ.
.070
[1.78]
Typ.
Recommended Mounting Hole Pattern
for .062 [1.57] Thick PC Board
The correct ordering number is
Note: Consult Product Drawing for details
on placing headers onto PC boards.
4-647648-0
The part numbers in bold
face are the RoHS equivalent
version. Example:
Base Part Numbers
Round Post
Lead Free
RoHS
No. of
Pos.
Header
Part Nos.
RoHS
Equiv.
Prefix/Suffix
2
3-647648–2
Standard UL94V-0, Tin Plated
647648
32–42
32–42
12
4-647648-2
Standard UL94V-0, .000015 [0.00038] Gold Plated
See page 15 for an explanation of
RoHS lead free equivalents.
647649
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
Note:
Select load headers (omitted pin
headers) are available upon request.
Please contact product engineer or
product manager for details.
52
Catalog 82056
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Revised 6-08
millimeters unless otherwise
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 Shrouded Headers—Straight and Right-Angle
Straight Post (.045 [1.14] Square or Round)
Right-Angle (.045 [1.14] Square)
Material and Finish
Housing —UL94V-0 rated, polyester,
black
.300
[7.62]
Ref.
.455
[11.56]
.045
[1.14]
.210
[5.33]
.455
[11.56]
Posts—Copper alloy, tin plated; or
.000030 [0.00076] or .000015
[0.00038] gold over nickel
.525
[13.34]
Ref.
Notes:
Polarized
Retention Peg
A
1. Post(s) can be omitted for keying pur-
poses. Specify the desired post(s) to
be omitted using the figure to identify
Post No. 1.
.002
0.05
]
.300
[7.62]
.205
Post [5.21
No. 1
.210
[5.33]
.045
[1.14]
Post
No. 1
.156
[3.96]
Typ.
2. Gold headers are duplex plated, gold
on mating end of post and tin on the
solder tail.
3. Peg holes are not required in PC boards
when headers without pegs are used.
4. One peg only on a 2 position header,
other position sizes have two pegs.
5. Right-angle front and rear bend headers
with retention pegs can be made avail-
able upon request. Minimums may apply.
.010
0.25
.125
[3.18
]
Front Bend
.525
[13.34]
.550
[13.97]
.300
.455
[11.56]
[7.62]
Ref.
.045
[1.14]
.210
[5.33]
.125
[3.18]
.156
[3.96]
.100
[2.54]
.167
[4.24]
.125
[3.18]
.525
[13.34]
Ref.
.205
[5.21]
For mateability options, see
matrix on pages 34, 35, 54
and 58.
For mating half visuals, see
pages 36 thru 39 and 55.
PC Board Hole Diameters
Square Post
Round Post
.156
[3.96]
Post
No. 1
.125
[3.18]
Typ.
.069/.065
[1.75/1.65]
.054/.050
[1.37/1.27]
Header Ordering Information
The “Base Part Numbers”
Chart at right shows the base
part number and number of
posts available for the
Rear Bend
Note: Consult Product Drawing for details
on placing headers onto PC boards.
.069/.065
[1.75/1.65]
Dia.
.239
[6.07]
.167
[4.24]
.066/062
[1.68/1.58]
Dia.
.066/062
[1.68/1.58]
Dia.
described headers.
.350/.700
[8.89/17.78]
.245
[6.22]
Min.
Prefixes and suffixes are deter-
mined by the number of post
positions in the header. For
example, the complete part
number for a 10-position
header with straight, square
posts and with pegs would be:
Base number 647127 plus
prefix-and-suffix
.078
[1.98]
.078
[1.98]
Edge of Board
Edge of Board
.156
[3.96]
.156
[3.96]
Recommended Mounting Hole Pattern for .062 [1.57] Thick
PC Board Using a Straight Post Header
Recommended Mounting Hole Pattern for .062 [1.57] Thick
PC Board Using a Right-Angle Header
Base Part Numbers
4- — -0
Straight Square Posts
Straight Round Posts
The correct ordering number is
Without Pegs
With Pegs
Without Pegs
With Pegs
4-647127-0
Header
Part Nos.
RoHS
Equiv.
Header
Part Nos.
RoHS
Equiv.
Header
RoHS
Equiv.
Header
RoHS
Equiv.
Part Nos.
647124
647132
647140
Part Nos.
647128
647136
647144
RoHS
No. of
Pos.
Dim.
A
Prefix/
Suffix
Standard UL94V-0, Tin Plated
647123 22–32
647127
22–32
22–32
22–32
22–32
22–32
22–32
22–32
22–32
22–32
.406
2
3
2--2
2--3
2--4
2--5
2--6
2--7
2--8
2--9
3--0
3--1
3--2
10.31
Standard UL94V-0, .000030 [0.00076] Gold Plated
647131 22–32 647135
Standard UL94V-0, .000015 [0.00038] Gold Plated
647139 22–32 647143
.562
14.27
.718
4
18.24
.874
5
22.20
Square Posts
1.030
Right-Angle Posts, Front Bend
Without Pegs
Right-Angle Posts, Rear Bend
Without Pegs
Header
6
26.16
1.186
7
Header
Part Nos.
RoHS
Equiv.
RoHS
30.12
Part Nos.
647126
647134
647142
Equiv.
22–32
22–32
22–32
1.342
8
34.09
Standard UL94V-0, Tin Plated
1.498
9
647125
22–32
38.05
1.654
Standard UL94V-0, .000030 [0.00076] Gold Plated
647133 22–32
Standard UL94V-0, .000015 [0.00038] Gold Plated
647141 22–32
10
11
12
42.01
1.810
45.97
1.966
49.94
Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or prod-
uct manager for details.
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
53
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Quad Connectors
The MTA-156 Quad Con-
nector provides a connec-
tion with four points of
contact. The UL94V-0 rated
connector with multi-point
contacts provides greater
current carrying capability
than the Standard MTA-156
Connector. These connec-
tors comply with
Tyco Electronics Quality
Specification 102-6* and
satisfy the VDE requirements
according to VDE 110.
Product Facts
I Provides four points of
contact
I Greater current carrying
capability than Standard
MTA-156 Connectors
I Connector styles include
both closed end and feed-
thru with locking ramp, with
and without polarizing tabs
in 2 through 12 positions
I Available for wire ranges of
18–22 AWG [0.9– 0.3
ꢀ
The connectors are avail-
able for wire ranges of
mm ]
2
I Contacts are lubricated for
fretting corrosion protection
18 – 22 AWG [0.9– 0.3 mm ]
and in a variety of styles
including closed end and
I Complies with
The MTA-156 Quad Connectors
Performance Data
feed-thru with locking ramp,
with and without polarizing
tabs.
Tyco Electronics Quality
Specification 102-6,
“Preparation of Design
Objectives”
only mate with standard MTA-
156 square post headers and
use existing MTA application
tooling for termination.
Voltage Rating —600 vac
Current Rating —12.5 amp max. on a
single circuit.
For Multiple Circuit Loading—
refer to Product Specification for current
rating chart.
Only one wire to be termin-
ated into an IDC contact
slot.
I Uses existing MTA applica-
tion tooling for termination
I Quad connectors preloaded
Low-Level Resistance —
3.0 m⍀ max. initial
Dielectric Withstanding Voltage—
1500 vac/1 min.
Insulation Resistance —
5000 M⍀ min. initial
Operating Temperature —
-55Њ C to ϩ105Њ C
*The 102-6 Quality Specification is
the new procedure for “Preparation
of Design Objectives”. Its purpose is
to provide a means for verifying the
maximum current carrying capacity
of the device.
with contacts
I All contacts are slotted for
insulation displacement
(IDC) termination technique
I Connectors and headers are
end-to-end stackable
Note: Refer to pages 70 through 74
for approved wire listings.
I AWG size is “frosted” on
the side of the connector
Technical Documents
Product Specifications
108-1219 MTA-156 Quad Connector
System
I Recognized under the
Component Program of
Underwriters
R
Application Specifications
114-1048 MTA-156 Quad
Connector
Laboratories Inc.,
File No. E28476
This matrix has been prepared to assist you, our customer,
in defining the correct mating halves for the MTA-156
header and connector combination. Where a “Y” is indi-
cated the combination is a valid mating pair.
I Certified by Canadian
Standards
R
Association,
File No. LR 7189
Headers
I Satisfies the VDE require-
ments according to VDE
110, Insulation Group B,
250 vac for air and creep-
age paths
644329
644370
644371
644375
644376
644377
644381
644382
644383
644387
644388
644389
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
54
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
www.tycoelectronics.com
C. America: 57-1-254-4444
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Quad Connectors—Closed End and Feed-Thru
Closed End with Locking Ramp
.245
[6.22]
.100
[2.54]
.100
[2.54]
A
.097
.090
[2.29]
[2.46]
.230
[5.84]
.325
[8.26]
.308
[7.82]
.355
[9.02]
.280
[7.11]
AWG
AWG
.180
[4.57]
.725
[18.42]
.156
[3.96]
Typ.
without Polarizing Tabs
with Polarizing Tabs
Feed-Thru with Locking Ramp
.245
[6.22]
A
.097
[2.46]
.090
[2.29]
.100
[2.54]
.100
[2.54]
.385
[9.78]
.325
[8.26]
.230
[5.84]
.308
[7.82]
.280
[7.11]
AWG
AWG
.180
[4.57]
.156
Typ.
.725
[18.42]
[3.96]
without Polarizing Tabs
with Polarizing Tabs
Material and Finish
Housing —UL94V-0 rated, nylon,
black
Base Part Numbers
Closed End with Locking Ramp
Without Tabs With Tabs
Feed-Thru with Locking Ramp
Contacts—High conductivity copper
alloy, post tin plated
Without Tabs
With Tabs
Connector Type
& Wire Size
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
Connector
Part Nos.
RoHS
Equiv.
For mateability options, see
matrix on page 54.
Standard UL94V-0, Tin Plated
18 AWG
For strain relief and dust
covers, see pages 40
and 41.
For mating half visuals, see
pages 46 thru 48 and 50,
52 and 53, (49 and 51 Front
Bend Headers only). Mates
with tin-plated square posts
only.
644329
32–42
32–42
32–42
644381
644382
644383
32–42
32–42
32–42
644375
644376
644377
32–42
32–42
32–42
644387
644388
644389
32–42
32–42
32–42
0.8-0.9 mm2
20 AWG
644370
644371
0.5-0.6 mm2
22 AWG
0.3-0.4 mm2
Refer to pages 70 thru 74
for approved wire listing.
Note: To determine connector overall
length (Dim. A), multiply .156 x the
number of circuits. Example: .156 x
10 circuits equals 1.560 inches
[39.62 mm].
Replacement IDC Contacts
Material and Finish
Contacts—High conductivity copper
alloy post tin plated
Connector Ordering
Information
The “Base Part Numbers”
Chart above shows the base
part number and number of
circuits available for the
described connectors.
Prefixes and suffixes are deter-
mined by the number of circuit
positions in the connector. For
example, the complete part
number for a 10-position
closed end connector with
locking ramp and without
polarizing tabs for 18 AWG
wire would be:
The set of numbers in bold face
are the RoHS equivalent ver-
sion of the standard product.
Example:
.562
[14.27]
Lead Free
No. of
Pos.
Standard
Prefix/Suffix
RoHS
.116
[2.95]
Prefix/Suffix
2
644329–2 3-644329–2
thru
Wire Size
Part
12
1-644329-2 4-644329-2
2
Numbers
AWG
18
mm
See page 15 for an explanation of
RoHS lead free equivalents.
0.8-0.9
0.5-0.6
0.3-0.4
3-644508-1
3-644509-1
3-644510-1
20
Note: All RoHS equivalent part num-
bers may not be available upon cat-
alog release. If the number you
need is not available, please contact
Product Engineering to expedite
your request.
22
Base number 644329 plus
prefix-and-suffix
1- — -0
Note: Tyco Electronics does not rec-
ommend terminating an MTA contact
more than one time. Use replace-
ment contacts when required for
field repairs or wire gage changes.
The correct ordering number is
1-644329-0
55
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Card Edge Connectors—Closed End and Feed-Thru
C
Material and Finish
Housing —UL94V-0 rated, polyester,
see chart for color
Contacts—Phosphor bronze, post tin
plated
.161
[4.09]
B
A
Ref.
.156
[3.96]
Typ.
.094
[2.39]
.300
[7.62]
.075
[1.91]
.170
[4.32]
Note: Refer to pages 70 thru 74 for
approved wire listings.
.380
[9.65]
.440
[11.18]
.125
[3.18]
Color Coding by Wire Size for
UL94V-0 Connectors
Dia.
.677
[17.2]
26 AWG —Blue
24 AWG—White
22 AWG—Red
20 AWG—Yellow
18 AWG—Orange
.100
[2.54]
Min.
.100
[2.54]
Min.
.005
0.13
D
.138
[3.51]
[
]
.075
[1.91]
E
R.
.156
[3.96]
Typ.
.005
0.13
.015
[0.38
] x 45° Cham.
Both sides
.375
[9.53]
Connector Ordering
Information
The “Base Part Numbers”
Chart at right shows the
base part number and num-
ber of circuits available for
the described connectors.
.005
0.13
.312
[7.92
Circuitry
side
.130
[3.3]
Typ.
]
.145
[3.68]
.090
[2.29]
Min.
B
Recommended Panel Cutout
Recommended PC Board Layout
for .062 [1.57] Thk. PC Board
Prefixes and suffixes are
determined by the number
of circuit positions in the
Base Part Numbers
Closed End
Feed-Thru
Without
Mounting Ears
Without
With
Mounting Ears
With
Mounting Ears
connector. For example, the
complete part number for a
12-position closed end con-
nector without mounting ears
for 18 AWG wire would be:
Connector Type
& Wire Size
Mounting Ears
No. of
No. of
No. of
No. of
Connector Circuits/
Connector Circuits/
Connector Circuits/
Connector Circuits/
Part Nos.
RoHS
Equiv.
Part Nos.
RoHS
Equiv.
Part Nos.
RoHS
Equiv.
Part Nos.
RoHS
Equiv.
Standard UL94V-0, Tin Plated
Base number 640859 plus
prefix-and-suffix
1- — -2
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
18 AWG
640859
640864
640865
640866
640867
640868
641283
641284
641285
641286
641287
641288
641289
641290
641291
641292
0.8-0.9 mm2
The correct ordering num-
ber is
1-640859-2
See page 15 for an explanation of
RoHS lead free equivalents.
20 AWG
640860
0.5-0.6 mm2
22 AWG
640861
0.3-0.4 mm2
Performance Data
Voltage Rating—600 vac
Current Rating —5 amp max.
Low-Level Resistance—
7 m⍀ max. initial
24 AWG
640862
0.2 mm2
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
3, 6, 9, 12,
15,18, 20-24
33, 36, 39, 42,
45, 48, 50-54
26 AWG
640863
0.12-0.15 mm2
Dielectric Withstanding Voltage—
1250 vac/1 min.
Dimensions
C
Insulation Resistance—
5000 M⍀ min. initial
No. of
Prefix/
Suffix
Circuits
A
B
D
E
3
.500 [12.70]
.926 [23.52]
1.394 [35.41]
1.862 [47.29]
2.330 [59.18]
2.798 [71.07]
3.266 [82.96]
3.578 [90.88]
1.248 [31.70]
1.716 [43.59]
.484 [12.29]
.952 [24.18]
.650 [16.51]
1.118 [28.40]
1.586 [40.28]
2.054 [52.17]
2.522 [64.06]
2.990 [75.95]
3.302 [83.87]
3.458 [87.83]
3.614 [91.80]
3.770 [95.76]
3.926 [99.72]
-3
-6
Operating Temperature —
Ϫ55Њ C to ϩ105Њ C
6
.968 [24.59]
1.436 [36.47]
1.904 [48.36]
2.372 [60.25]
2.840 [72.14]
3.152 [80.06]
3.308 [84.02]
3.464 [87.99]
9
2.184 [55.47] 1.420 [36.07]
2.652 [67.36] 1.888 [47.96]
3.120 [79.25] 2.356 [59.84]
3.588 [91.14] 2.824 [71.73]
3.900 [99.06] 3.136 [79.65]
-9
12
15
18
20
21
22
23
24
1- -2
1- -5
1- -8
2- -0
2- -1
2- -2
2- -3
2- -4
Technical Documents
Product Specification
108-1058 MTA-156 Card Edge
Connectors
3.734 [94.84] 4.056 [103.02] 3.292 [83.62]
3.890 [98.81] 4.212 [106.98] 3.448 [87.58]
Application Specification
114-1020 MTA-156 Connectors,
Posted Connectors and
3.620 [91.95] 4.046 [102.77] 4.368 [110.95] 3.604 [91.54]
3.776 [95.91] 4.202 [106.73] 4.524 [114.91] 3.760 [95.50]
Card Edge Connectors
56
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA-156 IDC Card Edge Accessories
Dust Cover
Retention Dimple
Material (RoHS Compliant)
UL94V-0 rated, polyester, white
.530
[13.46]
Cover is for both Closed End
and Feed-Thru connectors
.130
[3.3]
A
Cover Ordering Information
The “Base Part Numbers”
Chart at right shows the
base part number and
number of circuits available
for the described cover.
Prefixes and suffixes are
determined by the number
of circuit positions in the
cover. For example, the
complete part number for
a 12-position dust cover
would be:
Base Part Number
Cover Part No.
No. of Circuits
3, 6, 9, 12, 15, 18, 20-24
641106
Locking Plugs
Base number 641106 plus
No. of
Dim.
Prefix/
Suffix
Circuits
A
prefix-and-suffix
.504
12.80
3
-3
-6
Material (RoHS Compliant)
UL94V-2 rated, nylon, white
Part Number 641101-1
1- — -2
The correct ordering number
is
.972
24.69
6
1.440
36.58
9
-9
1-641106-2
1.908
12
15
18
20
21
22
23
24
1- -2
1- -5
1- -8
2- -0
2- -1
2- -2
2- -3
2- -4
.075
[1.91]
48.46
2.376
60.35
.195
[4.95]
1.150
[29.21]
2.844
72.24
.074
[1.88]
3.156
80.16
3.312
84.12
Note: Contact must be removed to
install locking plug.
3.468
88.09
3.624
92.05
3.780
96.01
Material (RoHS Compliant)
UL94V-2 rated, nylon, white
Part Number 641293-1
Replacement IDC Contacts
.100
[2.54]
.126
[3.2]
Material and Finish
Phosphor bronze; post tin plated
.170
[4.32]
.609
[15.47]
Part Numbers
3-640991-1 (18 AWG [0.8-0.9 mm2])
3-640992-1 (20 AWG [0.5-0.6 mm2])
3-640993-1 (22 AWG [0.3-0.4 mm2])
3-640994-1 (24 AWG [0.2 mm2])
.900
[22.86]
.130
[3.3]
.100
[2.54]
3-640995-1 (26 AWG [0.12-0.15 mm2])
Note: Contact can remain during
locking plug installation.
57
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.156 [3.96] Centerline SL-156 Crimp Contacts and Housings
Product Facts
I Meets the material
requirements of Table 23.1
of UL1410 Standard for
High-Voltage Television
Receivers and Video
Productions
I Rugged wire-to-board
interconnection to mate
with .045 square or round
post headers or staked
posts on .156 centers
I Standard Connectors accept
I Recognized under the
Component Program of
wire range of 18–24 AWG
ꢀ
[0.9–0.2 mm ] and LID
Underwriters
Connectors accept wire
range of 18–24 AWG
R
Laboratories Inc.,
ꢀ
File No. E28476
[0.9–0.2 mm ] and a lim-
ited 16 AWG [1.29–1.42
I Certified by Canadian
ꢀ
mm ] (2550–2800 CMA)
Standards
R
Association,
I Two-piece interconnection
system (connector/header)
File No. LR7189
I Housing made of flame
The AMP SL-156 connec-
tors shown on the following
pages are designed to
mate with .045 [1.14]
Performance Data
Voltage Rating —250 vac
Current Rating —
10 amp max. at 250 vac
Low-Level Resistance —
3.0 m⍀ max. initial
Dielectric Withstanding Voltage—
2000 vac/1 min.
Insulation Resistance—
1000 M⍀ min. initial
Operating Temperature—
Ϫ55Њ C to ϩ105Њ C
retardant nylon
I Available in 1- through
24-position connector
configurations
Technical Documents
Product Specification
108-1049, 108-1049-1, 108-1049-2
square or round post
headers or staked posts on
.156 [3.96] centers.
I Connectors are end-to-end
stackable
Application Specification
114-1021
The wire-to-board
I Wire-to-board system offers
polarization with friction
lock for positive mating
connector is a two-piece
connector system with the
wire crimped to the contact,
then inserted into the hous-
ing. This product mates with
the MTA-156 flat, polarized
and friction lock header, or
staked posts (not MTA-156
shrouded headers).
The Large Insulation
Diameter (LID) Contacts
and Housings are for use
in applications where wire
insulation is up to .112
[2.84] in diameter.
These matrixes represent only the housing and header
combinations. You also need to consider the plating on
the contacts and headers. Gold contacts with gold
headers and tin contacts with tin headers.
Matrix for Tin Plated
Part Numbers
Headers
Standard
LID
640250 647401
640251 647400
770849 647402
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Matrix for .000030
[0.00076] Gold Plated
Part Numbers
Headers
LID
Standard
640250 647401
640251 647400
770849 647402
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y Y Y Y N
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Matrix for .000015
[0.00038] Gold Plated
Part Numbers
Headers
Standard
LID
640250 647401
640251 647400
770849 647402
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
58
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Crimp Contacts and Keying Plugs
Contacts
.180
[4.57]
.115
[2.92]
Material and Finish
.012 [0.3] bright tin plated brass or
phosphor bronze; .012 [0.3] pre-tin
brass; or .012 [0.3] brass or phosphor
bronze with .000030 [0.00076] gold
over nickel (see chart)
.121/.115
[3.07/2.92]
.004
0.10
.131
[3.33
]
A
B
High Force
Low Force
(6.5 Amp Max. Current Rating)
(6.5 Amp Max. Current Rating)
I
All tin-plated contacts are
post lubricated to resist
fretting corrosion
.230
[5.84]
I
I
Maximum insulation
diameter is .105 [2.67]
.145/.140
[3.68/3.56]
Wire range is 18-30 AWG
2
[0.9-0.06 mm ]
C
Hooded (Dual Wipe)
(10 Amp. Max. Current Rating)
Wire Size
AWG mm2
24–30
0.2-0.06
Part Numbers
Contact
Material and Finish
brass, pre-tin plated
Strip
Loose Piece
A
641550-1
—
Application Note
brass, bright tin plated
brass, pre-tin plated
640252-1
640252-2
3-640252-1
350980-1
350980-2
350980-3
3-350980-1
770476-1
770476-2
3-770476-1
640706-1
640706-2
3-640706-1
640707-1
—
A
B
C
Part No. 640252 has a
higher mating and un-
mating force than Part
No. 350980 and is recom-
mended to be used only in
housings with 1 through 12
positions.
Part No. 350980 can be
used in any size housing
but is recommended to be
used in housings with 13
through 24 positions.
Part No. 770476 is recom-
mended for use in any size
housing. Its mating force is
similar to Part No. 350980
while unmating force is
similar to 640252.
brass, RoHS Compliant
brass, bright tin plated
brass, pre-tin plated
18–24
0.9-0.2
brass, gold plated
770258-1
3-640707-1
770522-1
770522-2
3-770522-1
brass, RoHS Compliant
phosphor bronze, bright tin plated
phosphor bronze, gold plated
phosphor bronze, RoHS Compliant
Application Tooling
Extraction Tool
Part No. 90471-1
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Applicator 680211-3
Loose Piece Contacts —
PRO-CRIMPER II Hand Tool
Part No. 58614-1 (408-4228)
[For field service use only]
For CERTI-CRIMP hand tool, contact
Technical Support.
(Request Catalog 65828)
AMP-O-LECTRIC Model “K”
Termination Machine* Applicator
466468-2
AMP-O-MATIC Stripper-Crimper
Machine* SCA 466947-1 or 567828-1
(with CQM) (Request Catalog 65004)
AMPOMATOR CLS IV+ Lead Making
Machine* Applicator 466468-1
(Request Catalog 82659)
For housings, see pages 60
and 61.
*Requires applicators. For part
numbers, call Technical Support.
Keying Plugs
.300
[7.62]
.225
[5.72]
.300
[7.62]
Material (RoHS Compliant)
UL94V-2 rated, nylon, natural color
Keying Plug
Part No. 640254-1
Keying Pin
Part No. 640255-1
59
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Housings—Wire-to-Board
.660
[16.76]
A
Housings
.156
[3.96]
Typ.
.100
[2.54]
.076
[1.93]
Typ.
Material (RoHS Compliant)
UL94V-0 rated, nylon, white
.019
[0.48]
.097
[2.46]
.250
[6.35]
Notes:
.037
[0.93]
1
2
2
3
2 4
Ref.
1. Accepts either .045 [1.14]
square or round posts. Housings
mate with flat and friction lock
headers, or staked posts on .156
[3.96] centers.
(A) With Locking Ramp/With Polarizing Tabs
2. Housings without ramp, with
polarizing tab, available upon
request. Minimums may apply.
A
.100
[2.54]
.660
[16.76]
.156
[3.96]
Typ.
.076
[1.93]
Typ.
.250
[6.35]
.097
[2.46]
3. Recommend contact:
Part No. 640252 for 1 thru 12
positions; Part No. 350980 for 13
thru 24 positions; Part No. 770476
for 1 thru 24 positions.
.037
[0.93]
Ref.
1
2
2
3
2 4
(B) With Locking Ramp/Without Polarizing Tabs
For contacts, see page 59.
For mateability options, see
matrix on page 58.
A
.076
[1.93]
Typ.
.156
[3.96]
Typ.
.660
[16.76]
.250
[6.35]
For mating half visuals, for
connectors with locking
ramp, see pages 46, 47,
48, 50 and 52, (49 and 51
Front Bend Headers only.)
1
2
2
3
2 4
.060
[1.52]
(C) Without Locking Ramp/Without PolarizingTabs
For mating half visuals,
for connectors without lock-
ing ramp, see pages 46
thru 52.
Note: Dim. A = 0.156 ϫ (No. of Positions – 1) ϩ 0.152
No. of
Positions*
Housing
Description
Part Numbers*
2–24
1–24
A
B
C
With Locking Ramp and Polarizing Tabs
With Locking Ramp and without Polarizing Tabs
Without Locking Ramp or Polarizing Tabs
770849
640250
640251
*Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and
12 Position = 1-xxxxxx-2.
Note: Housings not for use with LID Contacts. Shown on page 62.
60
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Housings With Through Board Latch
Housings
Material (RoHS Compliant)
UL94V-2 rated, nylon, white
.156
[3.96]
.125
[3.18]
.075
[1.91]
Typ.
.078
[1.98]
Typ.
.003
0.08
]
.063
[1.60
.250
[6.35]
.007
0.18
]
.050
[1.27
1
2
3
4
7
8
9
10
.003
0.08
.063
[1.60
]
.660
[16.76]
A
Mates with .045 square or
round staked posts only.
For contacts, see page 59
.
1
2
3
4
7
8
9
1 0
B
.105
.105
[2.67]
[2.67]
.002
.052
[1.32
0.05
]
Latch Cutout
+ .005
.163
– .000
+ 0.13
.015
[4.14
– 0.00
R.
Max.
[0.38]
4 Plc.
.078
[1.98]
PC Board
Posts
.156
[3.96]
Recommended PC Board Cutout
for .062 [1.57] Thick PC Board
Dimensions
No. of
Pos.
Latch Location
Centered Between Pos.
Part
Number
A
B
.312
2
1 and 2
1-770894-21
1-770894-31
1-770894-41
1-770894-51
1-770894-61
1-770894-71
1-770894-81
1-770894-91
1-770894-01
—
7.92
.468
11.89
3
4
1 and 2
2 and 3
—
—
—
—
—
—
.624
15.85
.780
19.81
5
2 and 3
.936
23.77
6
3 and 4
1.092
27.74
7
3 and 4
1.248
31.70
8
4 and 5
1.404
35.66
1.092
27.74
9
1 and 2 & 8 and 9
1 and 2 & 9 and 10
1.560
39.62
1.248
31.70
10
Note: Not for use with LID Contacts. Shown on page 62.
61
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
SL-156 Housings and Contacts for Large Insulation Diameter (LID) Wire
Housings
Material (RoHS Compliant)
UL 94V-0 rated, nylon, white
Notes:
.660
[16.76]
.156
[3.96]
Typ.
.054
[1.37]
Typ.
.095
[2.41]
.100
[2.54]
Typ.
1. Accepts Standard and LID
contacts.
2. Larger opening in housings
eases contact insertion when
using wires that have large
insulation diameters (.100-.112
[2.54-2.84]).
3. Housings are not End-to-End
stackable.
.250
[6.35]
.0365
[.927]
Ref.
.054
[1.37]
A
Note: Dim. A = 0.156 ϫ (No. of Positions – 1) ϩ 0.19
For mateability options, see
matrix on page 58.
For mating half visuals, for
connectors with locking
ramp, see pages 46, 47,
48, 50 and 52, (49 and 51
Front Bend Headers only.)
For mating half visuals, for
connectors without locking
ramp, see pages 46 thru 52.
Part Numbers*
Housings
No. of
Description
Positions*
with Larger Openings
for Oversize Wire
Without Locking Ramp
or Polarizing Tabs
647400
1-24
With Locking Ramp and
without Polarizing Tabs
647401
(shown above)
With Locking Ramp and
Polarizing Tabs
2–24
647402
*Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and
12 Position = 1-xxxxxx-2.
Contacts
Material and Finish
.012 [0.3] bright tin plated phosphor
bronze; .012 [0.3] phosphor bronze
with .000030 [0.00076] gold over nickel
(see chart)
.160
[4.06]
I
All tin-plated contacts are
post lubricated to resist
fretting corrosion
.112 [2.84]
.108 [2.74]
I
I
Maximum insulation
.524
[13.30]
diameter is .112 [2.85]
Wire range is 18-24 AWG
2
[0.9-0.2 mm ] and a limited
2
16 AWG [1.29-1.42 mm ]
.143
(2550-2800 CMA)
Product Specifications
108-1049-1 and 108-1049-2
Hooded (Dual Wipe)
(10 Amp Max. Current Rating)
Application Specification
114-1021
Application Tooling
Extraction Tool Part No. 90471-1
Part Numbers
For LID* Wire
Wire
Material
Plating
Size
Loose Piece Contacts —
PRO-CRIMPER II Hand Tool
Part No. 91368-1 [18-24 AWG]
Part No. 91369-1 [16 AWG]
(For field service use only.)
For CERTI-CRIMP hand tool, contact
Technical Support.
Strip Contacts —
AMP-O-LECTRIC Model “G”
Termination Machine*
Strip
Loose Piece
647409-1
647409-2
3-647409-1
647485-1
647485-2
3-647485-1
Tin
Gold
647406-1
647406-2
Phosphor
Bronze
18-24 AWG
RoHS Compliant
Tin
3-647406-1
647466-1
16 AWG
(2550-2800 CMA only)
Phosphor
Bronze
Gold
647466-2
RoHS Compliant
3-647466-1
*Large Insulation Diameter (.100-.112 [2.54-2.84])
Notes: 1. For information on application tooling, call Technical Support.
2. Can not be used with Standard SL-156 Housings, must be used with LID Housings only.
Applicator 1385048-3 [18-24 AWG]
Applicator 1385219-3 [16 AWG]
AMP-O-LECTRIC Model “K”
Termination Machine*
Applicator 1385048-2 [18-24 AWG]
Applicator 1385219-2 [16 AWG]
*For additional part numbers and
information contact Technical Support.
62
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System
Product Facts
I .156 [3.96], .200 [5.08] and
.312 [7.92] centerline
I Wire-to-board connectors
comprised of plug housings,
receptacle contacts for
discrete wire, and mating
post headers
I Hooded contact designed to
accept wire with insulation
diameters up to .118 [3.00]
I Positive locking feature
built into header back wall
I Locking mechanism on
connector housing
maximizes retention
I Number of positions: 1 to 11
for .156 [3.96] centerline;
2 to 12 for .200 [5.08]
centerline; and 2 to 5 for
.312 [7.92] centerline
I Straight, through-hole
headers
I Positive latch design for
easier mating and unmating
AMP Economy Power (EP)
Connectors are designed
for secondary power circuit
applications. They consist
of wire-to-pc board plug
housings (for receptacle
contacts) and mating post
headers. Three contact
centerline spacings are
available: .156 [3.96], .200
[5.08] and .312 [7.92].
Headers with .156 [3.96]
centerline are offered in
2 through 11 positions;
2 through 12 positions for
.200 [5.08] centerline; and
.312 [7.92] centerline are
available in 2 through 5
positions. Both versions are
provided in bulk pack or in
tubes for automatic
Performance Characteristics
Voltage Rating — 250 VAC
Current Rating — 7.5 amp max. (2 to
11 pos.), 8 amp max. (1 pos.)
Low Level Overall Resistance–
Initial — 10 mΩ max.
Final — 20 mΩ max.
Dielectric Withstanding Voltage —
1.5 kV AC, 1 min.
Insulation Resistance —
Initial — 1000 MΩ min.
Final — 500 MΩ min.
Durability — 50 mating and unmating
cycles
I Polarization tabs help
prevent post misalignment
and mismating
I Low-profile mating height of
.641 [16.3] for 2 to 11
positions
I Straight headers are end-to-
end stackable to conserve
PCB space
machines.
I Header packaging: bulk
pack and tube loaded
During mating, the positive
locking lever on the outside
of the plug housing
The slim, straight, post
headers are stackable end-
to-end for greater flexibility
when designing pc board
configurations.
I Plug housings and post
headers intermateable with
JST VH connectors
Operating Temperature — -13˚F to
+221˚F [-25°C to +105°C]
engages the mating header
housing to provide for
greater retention. This
helps maintain reliable
connections, when other
non-locking type connec-
tors could vibrate apart.
This same locking lever
must be depressed to
unmate the connectors.
I Directive 2002/95/EC (RoHS
Compliant
Wire Size Range — 18-22 AWG
The mating height of a
[0.89-0.30 mm2]
low-profile plug and vertical
header is .642 [16.3]; even
the 1-position high-profile
style measures only .732
[18.6] above the pc board.
Compact dimensions like
these are well suited for
most applications in con-
Insulation Diameter — .118 [3.00]
max.
I Recognized under the
Component Program of
Underwriters
R
Technical Documents
Product Specification
108-5609
Application Specification
114-5253
Laboratories Inc.,
File No. E28476
I Certified by Canadian
The locking mechanism is
Standards
R
also located high enough to fined spaces.
help avoid interference with
pc board clear plastic
Association,
File No. LR 7189
Instruction Sheet
411-5899
Applications
coating (potting), which is a
common treatment for many
home appliances.
I Household appliances,
garage door openers,
power supplies, power
connections, or other
areas requiring additional
connector retention
63
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Contacts and Plug
Housings, Low-Profile
Crimp, Snap-in
Receptacle Contacts
.083
[2.11]
Material and Finish
(RoHS Compliant)
See chart.
.362
[9.19]
.055
[1.40]
1
Related Product Data
Plug Housings — Pages 64, 67 and 69
Applicator Part Number
Part
Number
AMP-O-LECTRIC
Terminator
AMPOMATOR
CLS IV+
Lead Maker
Base Part No.
356500
Wire Size
Range
Wire
Insulation
Diameter
Material
and
Finish
Strip
Form
Loose
Piece
Model K
Model G
Part No.
354500-1
2
AWG
mm
Part No.
1-471273-3
Phos. Brz.,
Pre-Tin
1123721-1 1318912-1*
1123721-2
.067-.118
1.70-3.00
18–22 0.89-0.30
1385286-1
1385286-2 1385286-3
Brass,
Pre-Tin
—
* For 18–20 AWG, use Straight Action Hand Tool (SAHT) Part Number 91579-1.
Plug Housings, Low-Profile
Material and Finish
.524
[13.31]
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.284
[7.21]
Circuit No. 1
.150
[3.81]
A
.059
(3-11 Pos.)
[1.50]
(2 Pos.)
.142 [3.61]
.382
[9.70]
.295 [7.49]
Related Product Data
Contacts — see above
Mating Post Headers — Pages 65
and 66
.224
[5.69]
.154 [3.91]
.039 [1.00]
.156
[3.96]
.039
[1.00]
Section X-X
Number of
Positions
Dimension
A
Part
Number
2
3
4
5
6
7
8
9
.310 [ 7.86]
.465 [11.82]
.621 [15.78]
.777 [19.74]
.933 [23.70]
1.089 [27.66]
1.245 [31.62]
1.401 [35.58]
1.557 [39.54]
1.713 [43.50]
1.878 [47.70]
1-1123722-2
1-1123722-3
1-1123722-4
1-1123722-5
1-1123722-6
1-1123722-7
1-1123722-8
1-1123722-9
1-1123722-0
1-1123722-1
1-647690-2*
10
11
12
* Consult Product Drawing for dimensional detail.
64
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
C. America: 57-1-254-4444
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
.156 [3.96]
Typ.
Straight and Right-Angle
Low-Profile Post Headers
Straight
.078 [1.98]
Typ.
Edge of Board
A
.190 [4.82]
.028 [0.7]
.156 [3.96] Centerline
.335
[8.5]
.268
[6.8]
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated natural
color
.125 [3.18]
.077 [1.95]
.077 [1.95]
Centerline
.156
[3.96]
.066/.062
[1.68/1.57]
.069/.065
[1.75/1.65]
.045
[1.14]
Sq. Post
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Recommended Mounting Hole Pattern
for .063 [1.6] Thick PC Board
.303 [7.7]
.244 [6.2]
.118 [3.0]
Post No. 1
Post — Tin-plated brass
.146 [3.7]
Part Number
Related Product Data
Mating Plug Housings — Page 64
Number of
Positions
Dimension
A
Bulk Pack
Tube Loaded (Pcs. per Tube)
1-1318300-2 (61)
1-1318300-3 (40)
1-1318300-4 (30)
1-1318300-5 (24)
1-1318300-6 (20)
1-1318300-7 (17)
1-1318300-8 (15)
1-1318300-9 (13)
1-1318300-0 (12)
1-1318300-1 (11)
—
Bulk Pack with Pegs
1744057-2
2
3
.310 [ 7.86]
1-1123723-2
1-1123723-3
1-1123723-4
1-1123723-5
1-1123723-6
1-1123723-7
1-1123723-8
1-1123723-9
1-1123723-0
1-1123723-1
1-647689-2*
.465 [11.82]
.621 [15.78]
.777 [19.74]
.933 [23.70]
1.089 [27.66]
1.245 [31.62]
1.401 [35.58]
1.557 [39.54]
1.713 [43.50]
1.871 [47.52]
1744057-3
4
1744057-4
5
1744057-5
6
1744057-6
7
1744057-7
8
1744057-8
9
1744057-9
10
11
12
1-1744057-0
1-1744057-1
1-1744057-2
* Consult Product Drawing for dimensional detail.
.156 [3.96] Centerline
Right-Angle
Edge of Board
A
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.350
[8.89]
.020
[0.50]
.339
[8.60]
.272
[6.90]
.004
0.10
.079
[2.00
.045
[1.14]
.156
Sq. Post
]
.156
[3.96]
Typ.
[3.96]
Ø .065/.069
[1.65/1.75]
.126
[3.20]
.339
[8.60]
Post — Tin-plated brass
.370
[9.40]
.004
0.10
Recommended
PC Board Layout
.126
[3.20
]
Related Product Data
Mating Plug Housings — Page 64
Post No. 1
.142
[3.60]
.323
[8.20]
.045
[1.14]
Ref.
Number of
Positions
Dimension
A
Part Number
2
3
.312 [ 7.92]
.468 [11.88]
.624 [15.84]
.780 [19.80]
.935 [23.76]
1.091 [27.72]
1.247 [31.68]
1.403 [35.64]
1.559 [39.60]
1.715 [43.56]
1.871 [47.52]
647676-2
647676-3
647676-4
647676-5
647676-6
647676-7
647676-8
647676-9
1-647676-0
1-647676-1
1-647676-2
4
5
6
7
8
9
10
11
12
65
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Maximum Temperature Rating: 280°C
Straight and Right-Angle
Low-Profile Post Headers,
High Temperature
Straight
.156
[3.96]
A
Typ.
Edge of Board
.109
[4.82]
.225
[5.72]
.339
[8.60]
.156 [3.96] Centerline
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
high temperature, natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.156
[3.96]
.045
[1.14]
Typ.
.059
[1.51]
Sq. Post
Ø .065/.069
[1.65/1.75]
Post No. 1
Recommended
PC Board Layout
.303
[7.70]
.370
[9.40]
.575
[14.60]
.145
[3.69]
Post — Tin-plated brass
.323
[8.21]
Related Product Data
Mating Plug Housings — Page 64
Number of
Positions
Dimension
A
Part Number
2
3
.312 [ 7.92]
.468 [11.88]
.624 [15.84]
.780 [19.80]
.935 [23.76]
1.091 [27.72]
1.247 [31.68]
1.403 [35.64]
1.559 [39.60]
1.715 [43.56]
1744055-2
1744055-3
1744055-4
1744055-5
1744055-6
1744055-7
1744055-8
1744055-9
1-1744055-0
1-1744055-1
4
5
6
7
8
9
10
11
Right-Angle
Edge of Board
A
.156 [3.96] Centerline
.190
[4.82]
.350
[8.89]
.339
[8.60]
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
high temperature, natural color
.156
Typ.
.045
[1.14]
.059
[1.51]
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.156
[3.96]
Sq. Post
Typ.
Post No. 1
[3.96]
Ø .065/.069
[1.65/1.75]
.303
[7.70]
Recommended
PC Board Layout
.370
[9.40]
Post — Tin-plated brass
.617
[15.68]
Related Product Data
Mating Plug Housings — Page 64
.142
[3.60]
.323
[8.21]
Number of
Positions
Dimension
A
Part Number
2
3
.312 [ 7.92]
.468 [11.88]
.624 [15.84]
.780 [19.80]
.935 [23.76]
1.091 [27.72]
1.247 [31.68]
1.403 [35.64]
1.559 [39.60]
1.715 [43.56]
1.871 [47.52]
1744056-2
1744056-3
1744056-4
1744056-5
1744056-6
1744056-7
1744056-8
1744056-9
1-1744056-0
1-1744056-1
1-1744056-2
4
5
6
7
8
9
10
11
12
66
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
www.tycoelectronics.com
C. America: 57-1-254-4444
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Plug Housings and
Post Headers
.406
[10.30]
A
.263
[8.88]
.053
[1.35]
Typ.
Plug Housings
.200 [5.08] Centerline
.051
[1.30]
Circuit No. 1
.051
[1.30]
.200
[5.08]
Typ.
Material and Finish
(RoHS Compliant)
Number of
Positions
Dimension
Part
Number
A
Housing — UL 94V-0 rated nylon,
2
3
4
5
6
7
8
9
.353 [ 8.98]
.553 [14.06]
.753 [19.14]
.953 [24.22]
1.153 [29.30]
1.353 [34.38]
1.553 [39.46]
1.753 [44.54]
1.953 [49.62]
2.153 [54.70]
2.353 [59.78]
1744036-2
1744036-3
1744036-4
1744036-5
1744036-6
1744036-7
1744036-8
1744036-9
1-1744036-0
1-1744036-1
1-1744036-2
natural color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Related Product Data
Contacts — Page 64
Mating Post Headers — See below
10
11
12
.109
[4.82]
.200
[5.08]
A
Post Headers
Typ.
.200 [5.08] Centerline
.339
[8.60]
Ø .065/.069
[1.65/1.75]
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Recommended PC Board Layout
.200
[5.08]
.059
[1.51]
.045
[1.14]
Typ.
Sq. Post
Post No. 1
.303
[7.70]
.370
[9.40]
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.575
[14.60]
.146
[3.70]
.323
[8.21]
Post—Tin-plated brass
A
.190
[4.82]
Edge of Board
Related Product Data
Mating Plug Housings — See above
.669
[17.00]
Max.
.339
[8.60]
Ref.
.080
[2.02]
.200
[5.08]
.045
[1.14]
2 Plcs.
Typ.
.059
[1.51]
Sq. Post
Ø .065/.069
[1.65/1.75]
Post
No. 1
.303
[7.70]
Recommended PC Board Layout
.370
[9.40]
.142
[3.60]
.323
[8.21]
Part Number
Right-Angle
1744048-2
1744048-3
1744048-4
1744048-5
1744048-6
1744048-7
1744048-8
1744048-9
1-1744048-0
1-1744048-1
1-1744048-2
Number of
Dimension
A
Positions
Straight
2
3
4
5
6
7
8
9
.302 [ 7.68]
.502 [12.76]
.702 [17.84]
.902 [22.92]
1.102 [28.00]
1.302 [33.08]
1.502 [38.16]
1.702 [43.24]
1.902 [48.32]
2.102 [53.40]
2.302 [58.48]
1744037-2
1744037-3
1744037-4
1744037-5
1744037-6
1744037-7
1744037-8
1744037-9
1-1744037-0
1-1744037-1
1-1744037-2
10
11
12
67
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Straight Post Headers,
Low-Profile
.312 [7.92] Centerline
.063 +.004/-0 Dia. Punched Hole
[1.60 +0.1/-0]
A
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated natural
color
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.028 [0.7]
.065 +.004/-0 Dia. Drilled Hole
[1.65 +0.1/-0]
.335
.268
[8.5]
[6.8]
.312 [7.92] Centerline
.077 [1.95]
.312 [7.92]
Centerline
.077 [1.95]
Recommended PC Board Layout
Acceptable Board Thickness
.062 [1.57]
.045 Sq. Post
[1.14]
Post — Tin-plated brass
.303 [7.7]
.146 [3.7]
.244 [6.2]
.118 [3.0]
Post No. 1
Related Product Data
Mating Plug Housings — Page 64
Number of
Positions
Dimension
Part Number
Tube Loaded (Pcs. per Tube)
A
Bulk Pack
2
3
4
5
.465 [11.82]
.777 [19.74]
1.089 [27.66]
1.401 [35.58]
1-1123724-2
1-1123724-3
1-1123724-4
1-1123724-5
1-1318301-2 (40)
1-1318301-3 (24)
1-1318301-4 (17)
1-1318301-5 (13)
Mating Height
(Low-Profile)
Mating Height
.642 [16.3]
68
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Wire-to-Board Connector System (Continued)
Plug Housing and
Post Header, High-Profile
.571
[14.5]
.150 [3.8]
.207 [5.3]
1 Position Plug Housing
Part Number 1-1123823-1
.244 [6.2]
.169 [4.3]
.224 [5.7]
.039 [1.0]
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
Section X-X
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
Related Product Data
Contacts — Page 64
.528
[13.4]
.118
[3.0]
Mating Post Header — See below
1 Position Post Header,
Straight
Part Numbers
.347
[8.8]
.252
[6.4]
1-1123824-1 (Bulk Pack)
1-1318831-1 (Tube Loaded,
55 pcs. per Tube)
.327 Max.
[8.3]
Urethane Coating Area
.045 [1.14] Sq. Post
Material and Finish
(RoHS Compliant)
Housing — UL 94V-0 rated nylon,
natural color
.128 [3.25]
.337 [8.55]
.118 [3.0]
.189 [4.8]
Note: Alternate colors available upon
request. Minimums may apply. Please
contact product engineer or product
manager for details.
.146 [3.7]
Section X-X
.063 +.004/-0 Dia. Punched Hole
Post — Tin-plated brass
[1.60 +0.1/-0]
.065 +.004/-0 Dia. Drilled Hole
[1.65 +0.1/-0]
.079-.051+.004/-0
[2-1.3+0.1/-0]
Component Mounting Side
Related Product Data
Mating Plug Housing — See above
.079-.032 .004
.154 [3.9] Max. Dia.
Eyelet
PC Board
[2-0.8 0.1]
.079-.142 .004
[2-3.6 0.1]
.197 [5.0]
.158 .004 [4.0 0.1]
.315 .004 [8.0 0.1]
Max. Dia.
Soldering Side
Recommended PC Board Layout
Acceptable Board Thickness
.062 [1.57]
Mating Height
(High-Profile)
Mating Height
.732 [18.6]
Potting Height
.327 [8.3] Max.
Retention Lock
69
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Wire Selection
Proper wire selection is critical
to the success of a wire-to-
board application. The chart
identifies wires that have been
evaluated and approved by the
product engineering section.
If you plan to use a wire not
on the approved list, please
submit a sample 12" length of
wire to Tyco Electronics for
evaluation.
MTA Connectors Approved Wire Listing
MTA-100 Connectors
UL 1007 PVC Insulation
Wall
Approved Wire AWG
22, 24, 26, 28
.015″ [0.381]
.009″ [0.229]
.012″ [0.305]
.006″ [0.152]
.010″ [0.254]
.013″ [0.330]
.010″ [0.254]
.015″ [0.381]
.010″ [0.254]
.010″ [0.254]
UL 1061 Semi-Rigid PVC Insulation
UL 1095 Semi-Rigid PVC Insulation
UL 1371 TEFLON Insulation — TFE
UL 1429 Irradiated PVC — X.L.P.V.C.
UL 2464 PVC
22, 24, 26, 28
24
22, 26
22, 24, 26, 28
24
UL 3265 Irradiated Polyethylene — X.L.P.E.
UL 3266 Irradiated Polyethylene — X.L.P.E.
MIL-W-16878, Type B-PVC Insulation
UL 1213 TEFLON Insulation—T.F.E.
MTA-156 Connectors
22, 24
22, 24
22
AWG Metric Equivalents
18—0.8–0.9 mm2
20—0.5–0.6 mm2
22 —0.3–0.4 mm2
24—0.2 mm2
22
UL 1007 PVC Insulation
.015″ [0.381]
.009″ [0.229]
.015″ [0.381]
010″ [0.254]
.015″ [0.381]
.010″ [0.254]
.015″ [0.381]
.015″ [0.381]
.010″ [0.254]
.015″ [0.381]
18, 20, 22, 24
18, 20, 22, 24
22
UL 1061 Semi-Rigid PVC Insulation
UL 1180 TEFLON Insulation — T.F.E.
UL 1213 TEFLON Insulation — T.F.E.
UL 1316 PVC/Nylon Wall
26—0.12–0.15 mm2
28—0.08–0.09 mm2
18, 22, 24
18, 22
Product Specifications
108-1050—MTA-100 Connectors
108-1050-1—MTA-100 Posted
Connectors
108-1051—MTA-156 Connectors
108-1219—MTA-156 Quad Connector
System
UL 1429 Irradiated PVC — X.L.P.V.C.
UL 1430 Irradiated PVC — X.L.P.V.C.
UL 1569 PVC
18, 20, 22, 24
18, 20, 22, 24
18
UL 3265 Irradiated Polyethylene — X.L.P.E.
UL 3266 Irradiated Polyethylene — X.L.P.E.
22
18, 20, 22, 24
Note: When selecting approved wire styles noted on this list, the MTA Application Specifications guidelines must be
followed. Also, due to wire variations in insulation wall thickness, hardness and wire stranding we would recom-
mend evaluating the wire selected before final application approval.
108-1065— MTA-156 Posted
Connectors
108-1058—MTA-156 Card Edge
Connectors
TEFLON is a trademark of E.I. DuPont de Nemours and Company.
Application Specifications
MTA-100 Ribbon Cable Preparation
MTA-156 Ribbon Cable Preparation
114-1019—MTA-100 Connectors
114-1020—MTA-156 Connectors
114-1031—MTA-100 Ribbon Cable
Connector Assembly
.036-.046 Standard
(.046-.052 Allowable for
26-28 AWG Wire Only)
.036-.046 Standard
(.046-.052 Allowable for
26-28 AWG Wire Only)
.062-.080
[1.57-2.03]
.062-.080
[1.57-2.03]
Dead-End Notch
Feed-Thru Notch
Flush-Mount Notch
Feed-Thru Notch
114-1032—MTA-156 Ribbon Cable
Connector Assembly
114-1048—MTA-156 Quad Connector
.280-.450†
[7.112-11.43]
.400-.800†
[10.16-20.32]
.400-.600†
[10.16-15.24]
.500-1.000†
[12.70-25.40]
.100
[2.54]
(Typ.)
.156
[3.96]
(Typ.)
Insulation
Conductor
Insulation
Conductor
Ribbon Cable End View
Web
.064 [1.63]
Typ. (Max.)
After Notching
Web
.094 [2.39]
Typ. (Max.)
After Notching
.050 [1.27]
Dia. (Max.)
For Mass Terminating
.070 [1.78]
Dia. (Max.)
For Mass Terminating
† The dimensions shown represent the recommended minimum and maximum for notches;
the actual dimension will depend on your application requirements.
Notes:
1. Cable shall be notched, as indicated in the individual ribbon cable connector assembly drawing, according to the
requirements specified in these figures. Conductor shall not be exposed after notching, nor shall individual wire
stands be cut or nicked.
2. U.L. Style #2651 ribbon cable is approved for use with MTA-100 and MTA-156 connectors per Application
Specification 114-1031 and 114-1032.
Ribbon Cable
– A –
.010
A
Notes:
1. For MTA Cable Assemblies
Contact US Engineering
Cable Assembly Group.
2. For IDC Cable, see pages
71 thru 74.
Per Inch of Cable Width
Cable Edge-to-End Alignment
(Ends of the cable shall be prepared as indicated in this figure)
70
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
IDC Ribbon Cable
Product Facts
I Compatible with a variety
of Insulation Displacement
Connectors
I Available on .025 [0.63],
.0394 [1.00], .050 [1.27],
.100 [2.54] and .156 [3.96]
centerline
I Color code edge mark on
conductor #1
I Gray flame retardant
flexible PVC insulation
I Insulation rated for
temperature of
-20°C to +105°C
I Recognized under the
Component Program of
Underwriters
R
Laboratories Inc.,
File No. E53793
Tyco Electronics Corporation The .100 [2.54] centerline
IDC Ribbon Cable is
has an expanding array of
MADISON CABLE planar
PVC insulated product
designed for compatibility
with a variety of Insulation
Displacement Connectors.
AMP IDC terminations offer
a quick, reliable, cost-effec-
tive cabling system which
can be automated.
cable is available in 28 to
22 AWG, either as tinned or
as overcoated tinned wire,
in 2 to 28 conductors.
produced to tighter stan-
dards than usually required
for high yield insulation
displacement terminations.
The extra precision offers
uncomplicated operation in
fully automatic stripping,
notching and termination
equipment.
The .156 [3.96] centerline
is available in 22 AWG and
18 AWG, either as tinned
or overcoated tinned, in
2 to 24 conductors.
.050 [1.27] Centerline, IDC Ribbon Cable
Sizes —
Product Specifications
26 AWG, 7/34 Tinned copper, PVC
insulation (9 – 64 conductors), 500-ft
reels (Base AMP Part Number 57034)
28 AWG, 7/36 Tinned copper, PVC
insulation (9 – 64 conductors), 100-ft
reels (Base AMP Part Number 57040)
and 500-ft reels (Base AMP Part
Number 971111)
Voltage Rating — 30 VAC
Component Recognized by UL to
US and Canadian Standards —
AWM Style 2651
30 AWG, Other conductor counts avail-
able on request. For ordering informa-
tion, call Toll-Free: 1-877-623-4766 or
visit: http://www.madisoncable.com/
fsproducts.htm
71
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
B
A
.050 [1.27] Typ.
C
.010 [0.25]
.100
[2.54]
Typ.
Edge Mark
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation Thickness
Temperature Rating — -20°C to +105°C
Flammability — UL: VW1
Dimensions
Dimensions
No. of
Conductors
Part
Number
No. of
Conductors
Part
Number
A
B
C
A
B
C
28 AWG 7/32 Tinned Copper
24 AWG 7/32 Overcoated Tinned Copper
2
5
0.100 [2.54] 0.200 [5.08] 0.044 [1.12] 02WFY00006P
0.400 [10.16] 0.500 [12.70] 0.044 [1.12] 05WFY00006P
0.900 [22.86] 1.000 [25.40] 0.044 [1.12] 10WFY00006P
1.400 [35.56] 1.500 [38.10] 0.044 [1.12] 15WFY00006P
1.900 [48.26] 2.000 [50.80] 0.044 [1.12] 20WFY00006P
2.400 [60.96] 2.500 [63.50] 0.044 [1.12] 25WFY00006P
2.700 [68.58] 2.800 [71.12] 0.044 [1.12] 28WFY00006P
2
5
0.100 [2.54] 0.200 [5.08] 0.044 [1.12] 02WFY00007P
0.400 [10.16] 0.500 [12.70] 0.044 [1.12] 05WFY00007P
0.900 [22.86] 1.000 [25.40] 0.044 [1.12] 10WFY00007P
1.400 [35.56] 1.500 [38.10] 0.044 [1.12] 15WFY00007P
1.900 [48.26] 2.000 [50.80] 0.044 [1.12] 20WFY00007P
2.400 [60.96] 2.500 [63.50] 0.044 [1.12] 25WFY00007P
2.700 [68.58] 2.800 [71.12] 0.044 [1.12] 28WFY00007P
10
15
20
25
28
10
15
20
25
28
26 AWG 7/34 Tinned Copper
22 AWG 7/30 Tinned Copper
2
5
0.100 [2.54] 0.200 [6.08] 0.039 [.99] 02WEY00008P
2
5
0.100 [2.54] 0.200 [5.08] 0.051 [1.30] 02WGY00001P
0.400 [10.16] 0.500 [12.70] 0.039 [.99] 05WEY00004P
0.900 [22.86] 1.000 [25.40] 0.039 [.99] 10WEY00012P
1.400 [35.56] 1.500 [38.10] 0.039 [.99] 15WEY00002P
1.900 [48.26] 2.000 [50.80] 0.039 [.99] 20WEY00008P
2.400 [60.96] 2.500 [63.50] 0.039 [.99] 25WEY00008P
2.700 [68.58] 2.800 [71.12] 0.039 [.99] 28WEY00008P
0.400 [10.16] 0.500 [12.70] 0.051 [1.30] 05WGY00006P
0.900 [22.86[ 1.000 [25.40] 0.051 [1.30] 10WGY00002P
1.400 [35.56] 1.500 [38.10] 0.051 [1.30] 15WGY00006P
1.900 [48.26] 2.000 [50.80] 0.051 [1.30] 20WGY00006P
2.400 [60.96] 2.500 [63.50] 0.051 [1.30] 25WGY00006P
2.700 [68.58] 2.800 [71.12] 0.051 [1.30] 28WGY00006P
10
15
20
25
28
10
15
20
25
28
26 AWG 7/34 Overcoated Tinned Copper
2
5
0.100 [2.54] 0.200 [5.08] 0.039 [.99] 02WEY00007P
0.400 [10.16] 0.500 [12.70] 0.039 [.99] 05WEY00007P
0.900 [22.86] 1.000 [25.40] 0.039 [.99] 10WEY00007P
1.400 [35.56] 1.500 [38.10] 0.039 [.99] 15WEY00007P
1.900 [48.26] 2.000 [50.80] 0.039 [.99] 20WEY00007P
2.400 [60.96] 2.500 [63.50] 0.039 [.99] 25WEY00007P
2.700 [68.58] 2.800 [71.12] 0.039 [.99] 28WEY00007P
10
15
20
25
28
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of
Tyco Electronics Corporation, for engineering questions or for
order placement of this cable.
72
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
.156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation
B
A
Product Specifications
Voltage Rating — 300 Volts
UL Recognized — AWM Style 2651
CSA — Available on request
.078 [1.98] Typ.
C
.010
[0.25]
.156
[3.96]
Typ.
Edge Mark
Insulation —
Gray Flame Retardant Flexible PVC
.007 [0.17] Minimum Insulation
Thickness
Temperature Rating — –20°C to +105°C
Flammability — UL: VW1
Dimensions
B
No. of
Conductors
Part
Number
A
C
22 AWG 7/30 Tinned Copper
2
5
0.156 [3.96] 0.312 [7.92] 0.051 [1.30] 02WGY00008P
0.624 [15.85] 0.780 [19.81] 0.051 [1.30] 05WGY00008P
1.404 [35.66] 1.560 [39.62] 0.051 [1.30] 10WGY00008P
2.184 [55.47] 2.340 [59.44] 0.051 [1.30] 15WGY00008P
2.964 [75.29] 3.120 [79.25] 0.051 [1.30] 20WGY00008P
3.588 [91.14] 3.744 [95.10] 0.051 [1.30] 24WGY00008P
10
15
20
24
18 AWG 7/26 Tinned Copper
2
5
0.156 [3.96] 0.312 [7.92] 0.068 [1.73] 02WJY000001P
0.624 [15.85] 0.780 [19.81] 0.068 [1.73] 05WJY000010P
1.404 [35.66] 1.560 [39.62] 0.068 [1.73] 10WJY000010P
2.184 [55.47] 2.340 [59.44] 0.068 [1.73] 15WJY000010P
2.964 [75.29] 3.120 [79.25] 0.068 [1.73] 20WJY000010P
3.588 [91.14] 3.744 [95.10] 0.068 [1.73] 24WJY000010P
10
15
20
24
Other Conductor Counts Available on Request.
Contact MADISON CABLE (1-877-MADISON), a Division of
Tyco Electronics Corporation, for engineering questions or for
order placement of this cable.
73
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Prepared IDC Ribbon Cable
In addition to bulk cable,
the US Engineering Cable
Assembly Group offers
is 20 conductor for the .100
electrical connection when
the PC Board is separated
into smaller boards after
soldering. Widths are limited
to 20 conductors for the
.100 [2.54] centerline and
13 conductors for the .156
[3.96] centerline. However,
multiple cables can be
placed side-by-side in a
single connector. For other
styles and configurations
contact the product engi-
neer or product manager.
[2.54] centerline and 13
conductor for the .156
Prepared Cable for the .100 [3.96] centerline.
[2.54] and .156 [3.96] cen-
Prepared Cable is also
terline cables. This can be
in the form of prenotched
cable on reels or cut-to-
length cable segments.
available with a Strip and
Retain feature allowing the
cable assembly to be sol-
dered directly to the PC
Board. This saves space
and cost and reduces
Prenotched 250 foot reels
of cable can be produced
with notches at varying
increments or repeating all
along the cable. The maxi-
mum width of these cables
spare parts inventory. Strip
and Retain on both ends is
used in family board appli-
cations to maintain the
74
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Wire Termination Flowchart
Choose the appropriate MTA Connector from the MTA Catalog 82056.
Select the proper wire style and AWG for the chosen MTA Connector
(Refer to pages 70-74).
Choose the MTA Termination Tooling (Refer to pages 76-79).
Terminate the Wire-to-MTA Connector per Application Tooling Instruction Sheet.
Inspect the MTA Wire Termination per Application Specification, especially the wire
depth. See illustrations: 114-13072 — MTA-50 Connectors, 114-1019 — MTA-100
Connectors, 114-1020 — MTA-156 Connectors, Posted Connector, Card Edge,
114-1048 — MTA-156 Quad Connectors, 114-1031 — MTA-100 Ribbon Cable
Connector Assembly, and 114-1032 — MTA-156 Ribbon Cable Connector Assembly.
B Min.
Top of
Contact
Conductor
Bare wires will not be visible
beyond back of housing
A
Centerline of Conductor
Bare wires
will not extend
above top of contact
Back of Housing
Insulation Strain Relief
Connector
A
B
.069–.087
.040
MTA-100
[1.75-2.21] [1.02]
Conductor
.090–.113
.060
MTA-156
Insulation will be contained
within the confines of the
insulation strain relief as indicated
[2.29-2.87] [1.52]
Adjust the Termination Tooling (if needed) per Tooling Instruction Sheet
(repeat the step above).
75
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options
Note: Max. Insulation Outside Diameter Wire:
One-At-A-Time Termination Tooling Part Numbers
.060 [1.52] for MTA-100 Connectors/.095 [2.41] for MTA-156 Connectors
Notes:
Interchangeable Head and Interchangeable Head and
Interchangeable Head
1. A repair kit consists of a cam,
a feed-slide sub-assembly
and a locating pawl.
Loose-Piece Feed Track
Tape Feed Track
ꢁ
T-Handle
Maintenance
Tool
Manual Hand Tool 58074-1
Air Hand Tool 58075-1
Air Bench Mount Tool 58338-1
Electric Bench Machine 931800-1
MTA Connector
Assembly
Special
Applicator
Air Bench Mount
Tool 58338-1
Air Bench Mount
Tool 58338-1
Repair kits can be made
available for other inter-
changeable heads. Consult
Tyco Electronics.
2. Standard modular heads
58246-1 and 58247-1 are
recommended for low
Electric Bench
Electric Bench
Machine 931800-1
Machine 931800-1
Closed End
Feed Thru
MTA-50
1583503-1
—
—
—
—
58246-1 (Standard)*n
58246-2 (Ext Wear)*
58246-3 (Ribbon Cable)
58442-1
volume use.
Closed
End
853546-1 & 853542-1
(Base)
3. Extended wear modular
heads 58246-2 and 58247-2
are recommended for high
volume use.
4. T-Handle Maintenance Tools
are for maintenance (field)
use only. They are not rec-
ommended for production.
5. Some Manual Hand Tool
Assemblies are available:
a. Order 58579-1, comprised
of Head 58246-1 with
Manual Hand Tool 58074-1.
b. Order 58580-1, comprised
of Head 58247-1 with
Manual Hand Tool 58074-1.
c. Order 58639-1, comprised
of Head 58638-1 with
933567-1
466728-1
59803-1
MTA-100
Connector
Feed Thru
Posted
(Closed-End)
—
—
—
—
—
—
59803-1
59803-1
58638-1
58247-1 (Standard)**
58247-2 (Ext Wear)
58247-3 (Ribbon Cable)
58443-1
Closed
End
853547-1 & 853542-1
(Base)
933568-1
466727-1
59804-1
MTA-156
Connector
Feed Thru
Posted
(Closed-End)
Closed
End
Closed
End
—
—
—
—
—
—
59804-1
59804-1
58082-1
58061-1
58392-1
MTA-156
Card-Edge
MTA-156
Quad
—
—
—
—
567020-1
—
59839-1
59804-1
Manual Hand Tool 58074-1.
*Repair Kit 856600-1 **Repair Kit 856600-2
MTA-50 Mass Termination Tooling Part Numbers
Manual Arbor Frame (with slide)
Fixture, Discrete Wire, Feed-Thru
Part Number 1583518-1*
Part Number 1583516-1 (28-26 AWG)
Part Number 1583516-2 (30-28 AWG)
Upper Tooling
Part Number 1583514-1*
Fixture, Discrete Wire, Closed End
Part Number 1583515-1 (28-26 AWG)
Part Number 1583515-2 (30-28 AWG)
Fixture, Ribbon Cable, Closed End or
Feed-Thru
Part Number 1583517-1
*Required, plus appropriate Fixture(s).
Note: Max. Insulation Outside Diameter Wire:
.050 [1.27] for MTA-100 Connectors/.070 [1.78] for MTA-156 Connectors
MTA-100 and MTA-156 Mass Termination Tooling Part Numbers
Harness Board Holding Fixture
Used With
Interchangeable Head
and Tape Feed Track
Interchangeable Head
MTA Connector
Assembly
Part Number
Used With
Part Number
Applicator
Tooling
Part Number
Used With
Assembly
—
Assembly
58242-1
58242-3
58243-1
58243-3
854175-1 &
Closed End
—
—
312522-1
—
854200-1 (Base)
58575-1
—
58575-1
Manual Bench
Tool 58024-1
and Tooling
Assembly
58644-1 (Discrete Wire)†
58644-2 (Notched Cable)†
Feed Thru
58074-1 (Man Hd Tl)
—
MTA-100
Connector
Closed End
(Posted)
58635-1
58636-1
58575-1
58575-1
—
—
—
—
—
—
—
—
—
—
58039-1
Feed Thru
(Posted)
58244-1
58244-3
58245-1
58245-3
59848-1
59848-3
58009-1
58009-2
—
58576-1
—
58576-1
—
854176-1 &
854200-1 (Base)
Closed End
Feed Thru
Card Edge
312522-1
58646-1 (Discrete Wire)††
58646-2 (Notched Cable)††
58074-1 (Man Hd Tl)
—
—
—
—
—
—
—
—
—
—
Manual Bench
Tool 58024-1
and Tooling
Assembly
MTA-156
Connector
—
—
—
—
—
—
58576-1
—
58040-1
Closed End
(Posted)
58576-1
Feed Thru
(Posted)
58010-2
58576-1
Manual Bench
Tool 58024-1
and Tooling
58244-1
58244-3
—
58576-1
Closed End
—
—
—
MTA-156
Quad
Assy 58040-1
58024-1 and
Tooling Assy
58040-1
58245-1
58245-3
—
58576-1
Feed Thru
—
—
—
†2- through 12-positions. ††2- through 8-positions.
76
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
One-At-A-Time Termination
Tooling (Typical Tooling
Combinations)
Manual Hand Tool with
Interchangeable Head
Air Hand Tool with
Interchangeable Head
Air Bench Mount Tool with
Interchangeable Head and
Foot Switch
Electric Bench Machine with
Interchangeable Head
Power Units
Manual Hand Tool —
Pistol Grip Handle
Part No. 58074-1
Air Hand Tool —
Pistol Grip Pneumatic Handle
Part No. 58075-1
Air Bench Mount Tool —
Bench Mount Power Assembly
Part No. 58338-1
Electric Bench Machine —
IDC Power Unit
Part No. 931800-1
I Easy to use
I Light weight
I May be mounted with
interchangeable head
pointed up or down
I Operated by a foot
switch
I Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
I All electric: 120 VAC,
60 Hz, 2 A
I Ratchet control will not
release the trigger until it
is fully bottomed
I Head may be rotated for
user convenience
I Operates at air pressure
between 40 and 70 psi
[2.76 and 4.83 bar]
I Head may be rotated for
user convenience
I Compact, portable and
quiet
I Operated by a foot
switch
Electric Bench Machine with
Interchangeable Head and
Tape Feed Track
AMP-O-LECTRIC Bench
Machine with Special Applicator
Air Bench Mount Tool with
Interchangeable Head and Loose-Piece Feed Track
Interchangeable Heads and Applicators (Refer to page 76 for part numbers.)
Special Applicator
Interchangeable Head
Interchangeable Head and
Loose-Piece Feed Track
Interchangeable Head and
Tape Feed Track
I Connectors are easily
hand loaded into feed
track
I Automatically advances
the connector after each
termination
I Cannot be cycled until
the connector is properly
positioned
I Terminates one
unstripped wire per cycle
I No special setup required I No special setup required
I Connectors are easily
loaded into feed track
I Connectors are fed using
a simple spring-loaded
pusher
I Aligns and holds the
connector in place for
each termination
I Automatically advances
the connector after each
termination
I Tape-mounted connectors
are transferred from prod-
uct reel to feed track by
simply pulling on the free
end of the carrier tape
I Connectors are fed using
a simple spring-loaded
pusher
T-Handle Maintenance Tool
77
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
Mass Termination Tooling
(Typical Tooling
Combinations)
Manual Bench Tool with
Applicator and Holding Fixture
Air Harness Tool with
Applicator
Air Bench Machine
2700 lb Air Bench Machine with
Ribbon Cable Notcher Assembly
Power Units
Manual Bench Tool —
Arbor Frame Assembly
Part No. 58024-1
Air Harness Tools —
Air Bench Machine —
Pneumatic Unit
2700 lb Air Bench Machine —
Part No. 312522-1
Hand-Held Power Unit
with Applicator
Part No. 91112-2
I Operated by a foot
switch
Part No. 58575-1 (MTA-100)
Part No. 58576-1 (MTA-156)
I Applicator and holding
fixture can be oriented for
operator convenience for
closed-end or feed-thru
terminations
I Ram height (insertion
depth) is easily adjusted
I Operated by a foot
switch
I Capable of exerting
2,700 lb [12,000 N] of
force at minimum 80 psi
[5.52 bar] air pressure
I Applicator can be rotated
360° for orientation with
holding fixture
I Insertion depth is easily
adjusted
I Operates at air pressure
between 75 and 95 psi
[5.17 and 6.55 bar]
I Operates at air pressure
between 80 and 90 psi
[5.52 and 6.21 bar]
I Not recommended for
notching cable with more
than 14 conductors
I May be bench mounted
I May be bench mounted
Applicators and Notcher Assemblies
Ribbon Cable Notcher Assembly
I Notch cable with up to
28 conductors for .100
centerline, and 24
conductors for .156
centerline
I Pressure plate holds
cable in position during
notching
Manual Bench Tool with Applicator and Tape Feed Track
I Scrap conveniently
removed through a chute
with a blast of air from a
built-in air valve
Ribbon Cable Notcher
Assembly
Applicator and Holding Fixture
Applicator and Tape Feed Track
I Wires are laced into
plastic combs for mass
termination
I Trims excess wire for
closed-end terminations
I Holding fixture may be
mounted to a harness
board
I Tape-mounted connectors
are transferred from prod-
uct reel to feed track by
simply pulling on the free
end of the carrier tape
I Connectors are fed using
a simple spring-loaded
pusher
Wire Size
Part Number
854449-2
Centerline
Used With
AWG
.100
2.54
Manual Bench Tool
58024-1
Air Bench Machine
91112-2
26-28
.100
2.54
854449-4
22-28
2700 lb Bench Machine
312522-1
I Feed stop easily adjusted
for different connector
sizes
.156
3.96
854449-3
18-24
AMP-O-LECTRIC
Bench Machine 1-471273-3
(with Conversion Kit 690675-2)
Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC
Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb
Air Bench Machine.
78
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
MTA Application Tooling Options (Continued)
Technical Documents
The following is a list of technical documents covering the installation, operation, adjustment,
maintenance and repair of MTA application tooling.
Instruction Sheets (IS) provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
Customer Manuals (CM) provide complete, detailed instructions on the installation, operation,
adjustment, maintenance and repair of complex tools and application machines.
Applicator Instructions (AI) are similar to instruction sheets (which cover products and tools), and
provide instructions for installation, adjustment and maintenance of applicators used in auto-
matic and semiautomatic machines.
Hand Tools, Power Units & Accessories
Manual Arbor Frame (MTA-50)
Upper Tooling (MTA-50)
1583518-1
IS 408-8812
IS 408-8812
IS 408-6923
IS 408-6685
IS 408-6701
IS 408-6790
IS 408-9393
IS 408-4260
IS 408-4260
IS 408-7907
IS 408-7907
IS 408-7763
2700 lb Air Bench Machine
Terminator Assembly, "G" Term
AMP-O-LECTRIC Bench Machine
Conversion Kit
312522-1
354500-1
1-471273-3
690675-2
853542-1
854200-1
854468-1
854468-2
856600-1
856600-2
931800-1
CM 409-5843
CM 409-5842
CM 409-5128
IS 408-8022
IS 408-9636
IS 408-9650
IS 408-9687
IS 408-9687
IS 408-9745
IS 408-9745
CM 409-5746
1583514-1
58024-1
58039-1
58040-1
58074-1
58338-1
58575-1
58576-1
59803-1
59804-1
91112-2
Manual Arbor Frame Assembly
Ribbon Cable Applicator, .100
Ribbon Cable Applicator, .156
Manual Hand Tool
Base Assembly
Base
Air Bench Mount Tool
Adapter (AMP-O-LECTRIC)
Adapter (2700 lb Machine)
Repair Kit
Air Hand Tool (MTA-100)
Air Harness Tool (MTA-156)
T-Handle Maintenance Tool (MTA-100)
T-Handle Maintenance Tool (MTA-156)
Air Arbor Frame Assembly
Repair Kit
Electric Bench Mount Tool
One-At-A-Time Termination Tooling
Interchangeable Heads
MTA-50
Interchangeable Head & Loose Piece Feed Track
MTA-100
MTA-156
MTA-156
IS 408-9466
1583503-1
IS 408-8801
58247-1
58247-2
58247-3
58443-1
58061-1
58082-1
58392-1
IS 408-6930
IS 408-9380
IS 408-4146
IS 408-9607
IS 408-6794
IS 408-6795
IS 408-9450
933567-1
IS 408-9435
933568-1
MTA-100
Interchangeable Heads & Tape Feed Track
MTA-100
58246-1
58246-2
58246-3
58442-1
58638-1
IS 408-6929
IS 408-9379
IS 408-4147
IS 408-9603
IS 408-4358
MTA-156
IS 408-9637
853546-1
IS 408-9636
AI 408-8054
853547-1
Special Applicators
MTA-100
MTA-156
466728-1
466727-1
567020-1
AI 408-8054
AI 408-8069
Mass Termination Tooling
Die Set Assembly
MTA-50
MTA-100
MTA-156
MTA-100
1583515-1
1583515-2
1583516-1
1583516-2
1583517-1
IS 408-8812
IS 408-8812
IS 408-8812
IS 408-8812
IS 408-8812
58242-1
58242-3
58243-1
58635-1
58636-1
58644-1
58644-2
59844-1
59845-1
59845-3
IS 408-7994
IS 408-7994
IS 408-7994
IS 408-7994
IS 408-7994
IS 408-4406
IS 408-4440
IS 408-7994
IS 408-7994
IS 408-7994
58009-1
58009-2
58010-2
58244-1
58244-3
58245-1
58245-3
58646-1
58646-2
59848-1
59848-3
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-7995
IS 408-4405
IS 408-4439
IS 408-7995
IS 408-7995
854175-1
854176-1
IS 408-9667
MTA-156
IS 408-9650
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Discrete Wire
Produce 6-in. [15 cm] Long Jumpers, One 4-Position
MTA-100 Connector per End, Ribbon Cable*
Typical Application Rates
Terminations
Per Hour
Terminations
Per Hour
Method
Method
Manual Hand Tool 58074-1 with
2700 lb Air Bench Machine 312522-1 with
—
Interchangeable Head 58246-1
Applicator and Tape Feed Track
854175-1 and 854200-1 (Base)
7,500
Electric Bench Machine 931800-1 with
900
Interchangeable Head 58246-1
* Procedure: Mass terminate 12-conductor ribbon cable with three
connectors per end. After terminating, separate by tearing the
12-conductor assembly into three 4-conductor assemblies.
Electric Bench Machine 931800-1 with
Interchangeable Head and
1,100
1,250
Loose-Piece Feed Track 933567-1
Electric Bench Machine 931800-1 with
Interchangeable Head and Tape Feed Track
853546-1 and 853542-1 (Base)
Cable Notching
Cable Ends
Per Hour
Method
2700 lb Air Bench Machine 312522-1 with
Apply One 4-Position MTA-100 Feed-Thru
Connector per Assembly, Discrete Wire
Ribbon Cable Notcher Assembly 854449-2
and 854468-2 (Adapter)
1,000
Terminations
Per Hour
Method
Manual Bench Tool 58024-1 with
Applicator and Holding Fixture
650
For further information about tooling call Technical Support.
79
Catalog 82056
Revised 6-08
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
millimeters unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
specified. Values in brackets
are metric equivalents.
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Part Number Index
Note: This index lists all cataloged parts
by base no. only. Complete part nos.
(with prefixes and/or suffixes) are shown
on the page(s) indicated.
Part No.
640389
640426
640427
640428
640429
640430
640431
640432
640433
640434
640435
640440
640441
640442
640443
640445
640452
640453
640454
640455
640456
640457
640468
640469
640470
640471
640472
640473
640474
640475
640476
640477
640478
640479
640480
640481
640550
640551
640556
640557
640558
640559
640595
640599
640600
640601
640602
640604
640605
640606
640607
640608
640620
640621
640622
640623
640629
640630
640631
640632
640633
640634
Page
49
37
37
37
37
37
37
37
37
37
37
15
15
15
15
48
21
21
23
23
24
24
15
15
15
15
37
37
37
37
37
37
37
37
37
37
16
40
41
41
41
41
39
39
39
39
39
39
39
39
39
39
15
15
15
15
42
42
41
41
41
41
Part No.
640635
640636
640637
640638
640639
640642
640643
640706
640707
640708
640709
640859
640860
640861
640862
640863
640864
640865
640866
640867
640868
641101
641106
641113
641114
641115
641118
641119
641120
641121
641122
641123
641124
641125
641126
641127
641143
641144
641145
641146
641147
641148
641149
641150
641151
641152
641153
641154
641155
641156
641157
641168
641169
641170
641171
641172
641173
641174
641175
641176
641177
641186
Page
41
17
17
17
17
16
40
59
59
17
17
56
56
56
56
56
56
56
56
56
56
57
57
46
46
47
49
48
48
49
21
21
23
23
24
24
41
41
41
41
41
37
37
37
37
37
37
37
37
37
37
39
39
39
39
39
39
39
39
39
39
17
Part No.
641187
641188
641189
641190
641191
641192
641193
641198
641199
641200
641201
641202
641203
641204
641207
641208
641209
641210
641211
641212
641213
641214
641215
641216
641217
641218
641219
641220
641221
641222
641223
641224
641225
641226
641227
641228
641229
641230
641231
641232
641233
641234
641235
641236
641237
641238
641239
641240
641241
641242
641243
641244
641283
641284
641285
641286
641287
641288
641289
641290
641291
641292
Page
17
17
17
15
15
15
15
15
15
15
15
46
46
47
49
48
48
49
21
21
23
23
24
24
37
37
37
37
37
37
37
37
37
37
39
39
39
39
39
39
39
39
39
39
15
15
15
15
15
15
15
15
56
56
56
56
56
56
56
56
56
56
Part No.
Page
72
72
72
72
72
73
73
72
72
72
72
72
73
73
72
72
72
72
72
73
73
72
72
72
72
72
73
73
72
72
72
72
72
73
73
73
73
72
72
72
72
72
72
72
72
72
72
71
71
59, 60
60
60
59, 60
46
46
47
49
48
02WEY00007P
02WEY00008P
02WFY00006P
02WFY00007P
02WGY00001P
02WGY00008P
02WJY000001P
05WEY00004P
05WEY00007P
05WFY00006P
05WFY00007P
05WGY00006P
05WGY00008P
05WJY000010P
10WEY00007P
10WEY00012P
10WFY00006P
10WFY00007P
10WGY00002P
10WGY00008P
10WJY000010P
15WEY00002P
15WEY00007P
15WFY00006P
15WFY00007P
15WGY00006P
15WGY00008P
15WJY000010P
20WEY00007P
20WEY00008P
20WFY00006P
20WFY00007P
20WGY00006P
20WGY00008P
20WJY000010P
24WGY00008P
24WJY000010P
25WEY00007P
25WEY00008P
25WFY00006P
25WFY00007P
25WGY00006P
28WEY00007P
28WEY00008P
28WFY00006P
28WFY00007P
28WGY00006P
57034
57040
350980
640250
640251
640252
640383
640384
640385
640387
640388
80
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Part Number Index (Continued)
Part No.
641293
641301
641302
641303
641304
641305
641306
641307
641308
641309
641310
641311
641312
641313
641314
641425
641426
641427
641428
641429
641435
641436
641437
641438
641439
641440
641522
641523
641524
641525
641526
641533
641534
641535
641536
641537
641550
641623
641643
641644
641645
641646
641653
641654
641655
641656
641994
643067
643071
643075
643077
643498
643813
643814
643815
643816
643817
643818
643819
643820
643821
643828
Page
57
39
39
39
39
39
39
39
39
39
39
15
15
15
15
45
45
45
45
45
45
45
45
45
45
42
45
45
45
45
45
42
15
15
15
15
59
42
17
17
17
17
15
15
15
15
17
40
40
16
16
15
15
15
15
15
37
37
37
37
37
15
Part No.
643995
644020
644038
644040
644042
644043
644044
644082
644083
644284
644312
644313
644329
644370
644371
644375
644376
644377
644381
644382
644383
644387
644388
644389
644456
644457
644460
644461
644462
644463
644464
644465
644466
644467
644468
644469
644470
644471
644472
644486
644487
644488
644489
644497
644501
644502
644508
644509
644510
644511
644512
644513
644514
644540
644563
644564
644565
644566
644567
644569
644570
644572
Page
45
15
15
15
15
15
15
37
15
37
15
15
55
55
55
55
55
55
55
55
55
55
55
55
22
22
37
37
37
37
37
39
39
39
39
39
39
39
39
30
30
30
30
15
37
37
55
55
55
15
15
15
15
15
15
15
15
37
39
39
39
39
Part No.
644574
644575
644576
644577
644578
644579
644611
644612
644613
644614
644615
644616
644617
644627
644628
644629
644630
644631
644632
644633
644662
644663
644687
644694
644695
644702
644718
644720
644726
644749
644750
644751
644752
644753
644754
644755
644756
644757
644758
644759
644760
644761
644762
644763
644764
644765
644766
644767
644768
644769
644783
644791
644795
644803
644807
644809
644812
644814
644860
644861
644874
644875
Page
15
15
15
15
15
15
50
50
51
51
50
50
51
50
50
51
51
50
50
51
37
37
37
22
22
15
39
39
15
46
46
47
48
48
49
49
46
46
47
48
48
49
49
46
46
47
48
48
49
49
37
37
15
30
45
45
45
45
37
30
24
24
Part No.
644876
644877
644878
644884
644885
644886
644887
644888
644889
644890
644891
644892
644893
644894
644896
644897
644898
647000
647001
647002
647003
647004
647005
647006
647007
647008
647009
647010
647011
647012
647013
647014
647015
647016
647017
647018
647019
647020
647021
647022
647023
647030
647031
647032
647033
647047
647048
647050
647051
647075
647076
647078
647079
647106
647107
647108
647109
647114
647116
647117
647123
647124
Page
23
23
37
22
22
22
22
22
22
22
22
32
32
32
32
32
32
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
27
27
28
28
27
27
28
28
29
29
29
27
27
28
28
53
53
81
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
Part Number Index (Continued)
Part No.
647125
647126
647127
647128
647131
647132
647133
647134
647135
647136
647139
647140
647141
647142
647143
647144
647166
647167
647168
647295
647296
647297
647298
647299
647300
647400
647401
647402
647406
647409
647466
647476
647477
Page
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
29
29
29
28
28
28
27
27
27
62
62
62
62
62
62
45
15
Part No.
647478
647479
647480
647481
647485
647496
647497
647609
647623
647624
647625
647626
647627
647628
647629
647630
647646
647648
647649
647651
647652
647653
647676
647689
647690
770258
770476
770522
770849
770894
971111
1123721
1123722
Page
37
39
15
45
62
39
45
25
25
25
25
25
25
26
26
26
47
52
52
26
26
26
65
65
64
59
59, 60
59
60
61
71
64
64
Part No.
1123723
1123724
1123823
1123824
1318300
1318301
1318831
1318912
1375819
1375820
1445120
1445121
1445123
1445124
1445125
1445126
1445169
1445170
1445171
1445172
1445173
1445174
1445336
1445341
1445342
1445343
1445344
1445345
1445346
1445347
1445348
1445349
1445350
Page
65
68
69
69
65
68
69
64
31
31
9
Part No.
1445351
1445352
1445353
1445354
1445355
1445356
1445357
1445358
1445359
1445360
1445361
1445362
1445363
1445364
1445365
1445366
1445367
1445368
1445369
1445370
1445371
1445372
1445373
1445374
1445375
1445376
1744017
1744020
1744036
1744037
1744048
1744055
1744056
Page
7
7
7
7
7
7
7
7
5
5
5
10
9
5
5
10
9
5
5
10
9
5
5
9
5
9
5
10
10
10
31
7
5
5
5
5
5
7
5
7
5
7
48
15
67
67
67
66
66
7
7
7
7
7
7
Application Tooling Part Number Index
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
58517
58575
58576
58579
58614
58635
58636
58638
58639
58644
58646
59803
59804
59836
59837
59839
59845
59848
90471
31
76, 78, 79
76, 78, 79
76
91112
78, 79
64
853547
854175
854176
854200
854449
854468
856600
931800
933567
933568
1385286
1583503
1583514
1583515
1583516
1583517
1583518
76, 79
76, 79
76, 79
76, 79
78
58009
58010
58024
58039
58040
58061
58074
58075
58082
58242
58243
58244
58245
58246
58247
58338
58392
58442
58443
76, 79
76, 79
91579
312522
354500
466468
466727
466728
466747
466947
471273
567020
567373
567827
567828
567910
680211
690675
853542
853546
76, 78, 79
79
76, 78, 79
76, 79
59
59
76, 79
76, 79
76, 79
76, 79
76
76, 79
76, 79
17
78, 79
76, 79
76, 77, 79
76, 79
76, 79
64
76, 79
76, 77, 79
76, 77
59
76, 79
76, 79
76, 79
76, 79
76, 79
17
78, 79
76, 79
31
76, 79
76, 79
76, 79
76, 79
76, 79
76, 79
76, 79
76, 79
76, 79
31
76, 79
59
76, 79
41
31
76, 79
76
59
76, 77, 79
76, 79
79
78, 79
76, 79
76, 79
76, 79
59
76, 79
76, 79
82
Catalog 82056
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
UK: 44-208-420-8341
Global Contacts
Americas
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Canada – Toronto
Phone: +905-475-6222
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
United States
Harrisburg, PA
Phone: +1-717-564-0100
Fax:
+54-11-4733-2211
Fax:
+905-474-5520
Product Information Center:
Phone: +905-470-4425
Fax:
+52-55-1106-0901
Fax:
+1-717-986-7575
Brasil – São Paulo
Phone: +55-11-2103-6000
Product Information Center:
Phone: +1-800-522-6752
Fax:
Fax:
+905-474-5525
Fax:
+55-11-2103-6030
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
+1-717-986-7575
Colombia – Bogota
Phone: +57-1-319-8959
Chile – Santiago
Phone: +56-2-345-0361
Troy, MI
Phone: +1-248-273-3359
Fax: +1-248-273-3322
Fax:
+57-1-319-8960
Fax:
+54-11-4733-2083
Fax:
+56-2-223-1477
Asia/Pacific
Australia – Sydney
Japan – Kawasaki, Kanagawa
New Zealand – Auckland
Singapore – Singapore
Phone: +61-2-9554-2600
Phone: +81-44-844-8111
Phone: +64-9-634-4580
Phone: +65-6482-0311
Fax:
+61-2-9502-2556
Fax:
+81-44-812-3207
Fax:
+64-9-634-4586
Fax:
+65-6482-1012
Product Information Center:
Phone: +61-2-9840-8200
Product Information Center:
Phone: +81-44-844-8013
Philippines – Makati City
Phone: +632-848-0171
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax:
+61-2-9634-6188
Fax:
+81-44-812-3200
Fax:
+632-867-8661
Fax:
+886-2-8768-2268
India – Bangalore
Phone: +91-80-285-40800
Korea – Seoul
Phone: +82-2-3415-4500
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Thailand – Bangkok
Phone: +66-2-955-0500
Fax:
+91-80-285-40820
Fax:
+82-2-3486-3810
Fax:
+66-2-955-0505
Indonesia – Jakarta
Phone: +65-6482-0311
Malaysia – Selangor
Phone: +60-3-7805-3055
Fax:
+852-2735-0243
Vietnam – Ho Chi Minh City
Phone: +84-8-930-5546
Shanghai
Phone: +86-21-2407-1588
Fax:
Fax:
+65-6482-1012
Fax:
+60-3-7805-3066
Fax:
+84-8-930-3443
+86-21-2407-1599
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1-905-60-0
France – Cergy-Pontoise Cedex
Phone: +33-1-3420-8888
Lithuania and Latvia
Lithuania – Vilnius
South Africa – Port Elizabeth
Phone: +27-41-503-4500
Fax:
+43-1-905-60-1333
Fax:
+33-1-3420-8600
Phone: +370-5-213-1402
Fax:
+27-41-581-0440
Product Information Center:
Phone: +43-1-905-60-1249
Product Information Center:
Phone: +33-1-3420-8686
Fax:
+370-5-213-1403
Spain – Barcelona
Phone: +34-93-291-0330
Product Information Center:
Phone: +370-5-211-3016
Fax:
Fax:
+43-1-905-60-1251
Fax:
+33-1-3420-8623
Fax:
+34-93-201-7879
+370-5-213-1403
Belarus – Minsk
Phone: +375 17 237 47 94
France Export Divisions –
Cergy-Pontoise Cedex
Phone: +33-1-3420-8804
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Netherlands – ’s-Hertogenbosch
Phone: +31-73-6246-246
Fax:
Product Information Center:
Phone: +31-73-6246-999
Fax:
Fax:
+375 17 237 47 94
Fax:
+46-8-50-72-50-01
Fax:
+33-1-3420-8699
+31-73-6212-365
Belgium – Kessel-Lo
Phone: +32-16-352-300
Switzerland – Steinach
Phone: +41-71-447-0447
Germany – Bensheim
Phone: +49-6251-133-0
Fax:
+32-16-352-355
+31-73-6246-998
Fax:
+41-71-447-0444
Fax:
+49-6251-133-1600
Bulgaria – Sofia
Phone: +359-2-971-2152
Product Information Center:
Phone: +49-6251-133-1999
Norway – Nesbru
Phone: +47-66-77-88-50
Fax:
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
+90-212-282-5130/5430
Fax:
+359-2-971-2153
Fax:
+49-6251-133-1988
+47-66-77-88-55
Czech Republic and Slovakia
Czech Republic – Kurim
Phone: +420-541-162-111
Fax:
+90-212-281-8184
Greece – Athens
Phone: +30-210-9370-396/397
Poland – Warsaw
Phone: +48-22-4576-700
Ukraine – Kiev
Phone: +380-44-206-2265
Fax:
Product Information Center:
Phone: +380-44-206-2265
Fax:
Fax:
+30-210-9370-655
Fax:
+48-22-4576-720
Fax:
+420-541-162-223
Product Information Center:
Phone: +48-22-4576-704
+380-44-206-2264
Product Information Center:
Phone: +420-541-162-113
Hungary – Budapest
Phone: +36-1-289-1000
Fax:
+48-22-4576-720
Fax:
+420-541-162-132
Fax:
+36-1-289-1010
+380-44-206-2264
Product Information Center:
Phone: +36-1-289-1016
Romania – Bucharest
Phone: +40-21-311-3479/3596
Denmark – Glostrup
Phone: +45-43-48-04-00
United Kingdom –
Stanmore, Middlesex
Phone: +44-8706-080208
Fax:
+36-1-289-1017
Fax:
+40-21-312-0574
Fax:
+45-43-44-14-14
Ireland – Dublin
Phone: +353-1-866-5612
Russia – Moscow
Phone: +7-495-790-7902
Egypt – Cairo
Phone: +202-419-2334
Fax:
+44-208-954-6234
Product Information Center:
Freephone (UK only):
+0800-267-666
Phone: +44-8706-080208
Fax:
Fax:
+353-1-866-5714
Fax:
+7-495-721-1893
Fax:
+202-417-7647
Product Information Center:
Phone: +7-495-790-7902-404
Israel – Petach-Tikva
Phone: +972-3-929-0999
Estonia – Tartu
Phone: +372-5138-274
Fax:
+7-495-790-7902-401
Fax:
+972-3-919-1088
+44-208-420-8095
Fax:
+372-7400-779
Russia – St. Petersburg
Phone: +7-812-718-8192
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Finland – Helsinki
Phone: +358-95-12-34-20
Fax:
+7-812-718-8193
Fax:
+39-011-4031-116
Fax:
+358-95-12-34-250
Product Information Center:
Slovenia – Ljubljana
Phone: +39-011-4012-428
Phone: +386-1561-3270
Fax:
+39-011-40-287-428
Fax:
+386-1561-3240
Tyco Electronics Corporation
www.tycoelectronics.com
Tyco Electronics Corporation
Harrisburg, PA
82056–10K–MS–FP–6-08–OG3B
相关型号:
©2020 ICPDF网 联系我们和版权申明