T75S5D112-05 [MACOM]
High sensitivity â nominal coil power requirement is as low as 212mW.;型号: | T75S5D112-05 |
厂家: | Tyco Electronics |
描述: | High sensitivity â nominal coil power requirement is as low as 212mW. 光电二极管 继电器 |
文件: | 总2页 (文件大小:89K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Catalog 1308242
Issued 3-03 (PDF Revised 8-06)
P&B
Sensitive, Low Profile, Hi-Current
Relay Designed to Meet
International Standards
T75 series
10 Amp, PC Board
Miniature Relay
File E29244
File No. 3919
Users should thoroughly review the technical data before selecting a product part number. It
is recommended that user also seek out the pertinent approvals files of the agencies/
laboratories and review them to ensure the product meets the requirements for a given
application.
Features
Initial Dielectric Strength
•
•
High sensitivity – nominal coil power requirement is as low as 212mW.
Between Open Contacts: 1,000V rms.
Between Contacts and Coil: 4,000V rms, 8mm.
2
2
Low profile, .591 in. (15mm) tall case uses only .465 in (3cm ) of area on the
printed circuit board, permitting high density circuit design.
Power switching capability – contacts rated 10 amps in 1 Form A (SPST-NO) or 1
Form C (SPDT) arrangements.
•
•
•
•
•
Designed to meet UL, CSA, VDE, SEMKO and SEV requirements.
Designed to meet VDE 8mm spacing, 4kV dielectric, coil to contacts.
Designed to meet 3 mm creepage between contacts.
Conforms to: VDE 0110 – Insulation Group C (250V)
VDE 435 Part 201 – High current applications
Coil Data
Voltage: 3 to 60VDC.
Maximum Power @ 23°C: 1W.
Nominal Power @ 23°C: 230mW, typ.
Temperature Rise: 85C° per Watt.
Duty Cycle: Continuous.
VDE 0804 – Telecommunications equipment
VDE 0631 – Temperature controllers and limiters
VDE 0700 – Household appliances
VDE 0805/5.90 – Office machines
Wash tight (washable).
Well suited for a broad range of applications e.g. HVAC, appliances,
security and industrial control.
•
•
Coil Data
DC
Must
Operate
Voltage
Nominal
Coil
Current
(mA)
Nominal
Voltage
Resistance
in Ohms
10%
Contact Ratings @ 25°C with relay properly vented.
Remove vent nib after soldering and cleaning.
3
5
6
40
118
165
365
650
1,455
2,270
5,460
8,790
15,265
2.1
3.4
4.1
6.1
8.2
12.3
16.3
24.5
32.6
40.8
75.0
42.4
36.4
24.7
18.5
12.4
10.6
6.4
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: Silver-cadmium oxide.
Expected Mechanical Life: 10 million operations.
Expected Electrical Life:
DC
Coils
9
12
18
24
36
48
60
100,000 operations at 8 amps, 240VAC.
50,000 operations at 14 amps NO / 5 amps NC, 120VAC Res.
30,000 operations at 7.2 FLA, 45 LRA, 120VAC.
10,000 operations at 5 FLA, 30 LRA, 240VAC.
30,000 operations at B300 pilot duty (360VA, 240VAC; 470VA, 120VAC).
Contact Ratings (See Figure 1):
5.5
3.9
Maximum Switched Voltage: 380VAC.
Maximum Switched Current: 14/5 (N.O./N.C.) amps, AC resistive;
8 amps DC (see Fig. 1)
Maximum Switched Power: 200W, DC; 2,000VA, AC.
Minimum Required Contact Load: 12V, 100mA.
VDE Contact Ratings: 8 amps, 250VAC.
UL Contact Ratings: 10 amps, 240VAC; 8 amps 24VDC;
1/3 HP, 120VAC; 1/2 HP, 240VAC.
Operate Data @ 23°C
Must Operate Voltage: 70% of nom. voltage or less.
Must Release Voltage: 10% of nom. voltage or more.
Operate Time (Excluding Bounce): 6 ms, typ., at nom. voltage.
Release Time (Excluding Bounce): 2.5 ms, typ., at nom. voltage.
Maximum Switching Rate: 20 operations/second.
Figure 1 - DC Switching Load Limit Curve
Maximum Continuous Operating Voltage: 225% of nom. voltage.
300
200
ENVIRONMENTAL DATA
Temperature Range
Storage: -40°C to +130°C.
Operating: -40°C to +85°C.
100
50
40
30
25 W
20
50 W
Mechanical Data
20
10
0 W
0
W
Termination: Printed circuit terminals.
Enclosures: Wash tight (washable) case.
Weight: 0.39 oz. (11.0g) approximately.
10
.1
1
10
10 0
Sw itching Current (Am ps DC)
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
414
Catalog 1308242
Issued 3-03 (PDF Revised 8-06)
P&B
Ordering Information
Typical Part Number B
T75
S
5
D
1
1
2
-12
1. Basic Series:
T75 = Low profile, printed circuit board relay.
2. Enclosure:
S = Wash tight (washable).
3. Contact Arrangement:
1 = 1 Form A (SPST-NO)
5 = 1 Form C (SPDT)
4. Coil Input:
D = DC voltage
5. Coil Configuration:
1 = Single coil, non-latching (monostable)
6. Mounting and Terminals:
1 = Printed circuit terminals
7. Contact Material:
2 = Silver-cadmium oxide (AgCdO)
8. Coil Voltage:
03 = 3VDC
05 = 5VDC
06 = 6VDC
09 = 9VDC
12 = 12VDC
18 = 18VDC
24 = 24VDC
36 = 36VDC
48 = 48VDC
60 = 60VDC
NOTE: All part numbers are RoHS compliant.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
T75S5D112-05
T75S5D112-12
T75S5D112-24
Outline Dimensions
Wiring Diagram (Bottom View)
FORM A
1.126 MAX. 1.181 MAX.
(28.6) (30)
FORM C
.150
(3.8)
.591
(15)
*
.394
(10)
*ON SINGLE THROW MODELS,
ONLY NECESSARY TERMINALS
ARE PRESENT.
CONTACT TERMINALS: .023 x .040 (.58 x 1.02) REF.
COIL TERMINALS: .024 (.61) DIA. REF.
PC Board Layouts (Bottom Views)
1 Form C
1 Form A
.051 DIA. TYP.
(1.3)
.051 DIA. TYP.
(1.3)
.300
(7.6)
.300
(7.6)
.126
(3.2)
.110
(2.8)
.197
(5)
.110
(2.8)
.126
(3.2)
.748
(19)
.748
(19)
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
415
相关型号:
T76-G37-FREQ
HCMOS Output Clock Oscillator, 10MHz Min, 50MHz Max, ROHS COMPLIANT, MINIATURE, SMD, 8 PIN
EUROQUARTZ
©2020 ICPDF网 联系我们和版权申明