V23079-A1016-B301 [MACOM]
P2 V23079 Relay;型号: | V23079-A1016-B301 |
厂家: | Tyco Electronics |
描述: | P2 V23079 Relay |
文件: | 总14页 (文件大小:1919K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
P2 V23079 Relay
108-98002
Sept 06 Rev. D
ECOC: JM10
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Index
Dimensions
Coil Operating Range
Relay Code
4
5
6
Coil Data and Ordering Information
Contact Data
7
9
UL 508
File No. E 111441
UL 60950
Insulation
General Data
Packing
10
10
12
IEC/EN60950
IEC Ref. Cert. No. 3271
All specifications subject to change. Consult Tyco Electronics for latest specifications.
2 of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
2 pole telecom relay, polarized,
Through Hole Type (THT) or
Surface Mount Technology (SMT),
Relay types: non-latching with 1 coil
latching with 2 coils
latching with 1 coil
ROHS compliant (Directive 2002/95/EC) as per
product date code 0427.
Features
• Standard telecom relay (ringing and test access)
• Slim line 15 x 7.5 mm, 0.590 x 0.295 inch
• Switching current 5 A
• 2 changeover contacts (2 form C / DPDT)
• Bifurcated contacts
• Immersion cleanable
• High sensitivity results in low nominal power
consumption 140 mW for non-latching and latching
with 2 coils 70 mW for latching with 1 coil
• For single coil version:
• Surge voltage resistance between
contact and coil for single coil version:
• 2.5 kV (2 / 10 µs) meets the Telcordia
Requirement GR-1089
• 1.5 kV (10 / 160 µs) meets FCC Part 68
Typical applications
Insulation category
• Communications equipment linecard application
(ringing and test access)
PABX
Voice over IP
• Office equipment
• Measurement and control equipment
• Automotive equipment
CAN bus, keyless entry, speaker switch
• Medical equipment
• Consumer electronics
Set Top Boxes, HiFi
Basic insulation according
Working voltage
Mains supply voltage
Repetitive peak voltage
Pollution degree
IEC / EN 60950
≤ 300 Vrms
≤ 250 Vrms
2500 V
Internal: 1
External: 2
V-0
Flammability classification
Maximum operating temperature
85 °C
Options
• 1500 Vrms between open contacts
All specifications subject to change. Consult Tyco Electronics for latest specifications.
3 of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Dimensions
Dimensions in mm
THT
THT
SMT long terminals
V23079-x1xxx-B301
standard coil
SMT long terminals
V23079-x2xxx-B301
overmolded coil
SMT short terminals
V23079-x1xxx-B301
standard coil
SMT short terminals
V23079-x2xxx-B301
overmolded coil
V23079-x1xxx-B301
standard coil
V23079-x2xxx-B301
overmolded coil
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
L
W
H
14.5 0.10 0.570 0.004 14.6 0.10 0.575 0.004 14.5 0.10 0.570 0.004 14.6 0.10 0.575 0.004 14.5 0.10 0.570 0.004 14.6 0.10 0.575 0.004
7.2 0.10 0.283 0.004 7.2 0.10 0.283 0.004 7.2 0.10 0.283 0.004 7.2 0.10 0.283 0.004 7.2 0.10 0.283 0.004 7.2 0.10 0.283 0.004
9.8 0.10 0.385 0.004 9.5 0.10 0.374 0.004 10.4 0.15 0.409 0.006 9.9 0.10 0.390 0.004 10.4 0.15 0.409 0.006 9.9 0.10 0.390 0.004
T
T1
T2
3.25 – 0.25 0.128 – 0.010 3.25 – 0.25 0.128 – 0.010
N/A
N/A
N/A
5.52
N/A
0.217 0.006
N/A
5.52
N/A
0.217 0.006
N/A
5.52
N/A
0.217 0.006
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5.52 0.15 0.217 0.006
9.4 0.15 0.370 0.006 9.4 0.15 0.370 0.006 7.4 0.15 0.291 0.006 7.4 0.15 0.291 0.006
Tw 0.5 0.05 0.020 0.002 0.5 0.05 0.020 0.002 0.5 0.05 0.020 0.002 0.5 0.05 0.020 0.002 0.5 0.05 0.020 0.002 0.5 0.05 0.020 0.002
0.55 – 0.15 0.022 – 0.006 0.45 0.018 0.002 N/A N/A N/A N/A N/A N/A N/A N/A
S
THT Version
SMT Version
Long terminals
Short terminals
P2 SMT S
Mounting hole layout
Solder pad layout
View onto the component
side of the PCB (top view)
View onto the component side of the PCB (top view)
Long terminals
Short terminals
0,9 ±0,1
Note: Hole for pin 6 and 7
only for latching with 2 coils.
Basic grid 2.54 mm
Note: Solder pad for pin 6 and 7
only for latching with 2 coils
Note: Solder pad for pin 6 and 7
only for latching with 2 coils
Terminal assignment
Relay – top view
Non-latching type
not energized condition
Latching type,
reset condition
Latching, 2 coils
reset condition
Contacts in reset
position. Both coils can
be used either as set or
reset coils.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4 of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Coil Operating Range
3.4
3.2
3
Unom
Umax.
=
=
Nominal coil voltage
70 mW
Upper limit of the operative range of
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
2.8
2.6
2.4
2.2
2
the coil voltage (limiting voltage) when coils are
continously energized
Uop. min.
=
=
Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp. Ureset min.
Lower limit of the operative range of
the coil voltage (reliable release voltage)
1.8
1.6
1.4
1.2
1
Urel. min.
Unom. nominal coil voltage
0.8
0.6
0.4
0.2
0
Uop. min.
-40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
2.8
2.6
2.4
2.2
2
140 mW
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
1.8
1.6
1.4
1.2
Unom. nominal coil voltage
1
0.8
0.6
0.4
0.2
0
Uop. min.
Urel. min.
-40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
200 mW
2.8
2.6
2.4
2.2
2
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
1.8
1.6
1.4
1.2
1
Unom. nominal coil voltage
0.8
0.6
0.4
0.2
0
Uop. min.
Urel. min.
-40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
All specifications subject to change. Consult Tyco Electronics for latest specifications.
ꢀ of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Relay Code
V 2 3 0 7 9
Identification of the
Miniature Relay P2
Relay type
THT version
SMT version with long terminals
D = non-latching, 1 coil
E = latching, 2 coils
A = non-latching, 1 coil
B = latching, 2 coils
C = latching, 1 coil
F = latching, 1 coil
SMT version with short terminals
G = non-latching, 1 coil
H = latching, 2 coils
J = latching, 1 coil
Coil type
1 = standard coil; B1, E1, F1, J1, H1
2 = overmolded coil, A1*, A2, C1*, D1*, D2, E2, G1*, G2
(only monostable versions, i.e. relay type A, D, G)
*both standard and overmolded coil possible
Coil number
Monostable, 1 coil
008 = 3 V nominal voltage 108 = 3 V nominal voltage
Latching, 1 coil
Latching, 2 coils
218 = 2.4 V nominal voltage
208 = 3 V
211 = 4.5 V
201 = 5 V
202 = 6 V
206 = 9 V
203 = 12 V
011= 4.5 V
001 = 5 V
002 = 6 V
006 = 9 V
003 = 12 V
005 = 24 V
111 = 4.5 V
101 = 5 V
102 = 6 V
106 = 9 V
103 = 12 V
105 = 24 V
205 = 24 V
Contact arrangement / material
B301 = 2 changeover contacts; silver nickel, gold-plated, against silver nickel, gold-plated
B201 = 2 changeover contacts; silver palladium, gold-plated, against silver palladium
Ordering example: V23079-D2001-B301
Miniature relay P2 SMT version with long terminals (overmolded coil), non-latching, 1 coil, 5 V nominal voltage,
2 changeover contacts, silver nickel contacts
All specifications subject to change. Consult Tyco Electronics for latest specifications.
ꢁ of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Coil Data (values at 23 °C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
Maximum
voltage Umin
voltage Umax
Vdc
Vdc
Vdc
Vdc
mW
Ω / 10 ꢀ
THT Standard non-latching coil
V23079-A1008-B301
V23079-A1016-B301
V23079-A1011-B301
V23079-A1001-B301
V23079-A1002-B301
V23079-A1006-B301
V23079-A1003-B301
V23079-A1005-B301
3
4
4.5
5
6
9
12
24
2.25
3.00
3.38
3.75
4.50
6.75
9.00
18.00
6.50
8.70
9.80
10.90
13.00
19.60
26.15
52.30
0.30
0.40
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
140
64
114
145
178
257
578
1029
4114
2-1393788-2
2-1393788-9
2-1393788-4
1393788-3
1393788-8
2-1393788-0
1-1393788-1
1-1393788-6
THT non-latching, overmolded coil
V23079-A2008-B301
V23079-A2011-B301
V23079-A2001-B301
V23079-A2002-B301
V23079-A2006-B301
V23079-A2003-B301
3
4.5
5
6
9
2.25
3.38
3.75
4.50
6.75
9.00
6.50
9.80
10.90
13.00
19.60
26.15
0.30
0.45
0.50
0.60
0.90
1.20
140
140
140
140
140
140
64
145
178
257
578
6-1419120-6
3-1393789-9
3-1393789-5
3-1393789-6
3-1393789-8
3-1393789-7
12
1029
THT latching 2 standard coils
V23079-B1208-B301
V23079-B1211-B301
V23079-B1201-B301
V23079-B1202-B301
V23079-B1206-B301
V23079-B1203-B301
V23079-B1205-B301
3
4.5
5
6
9
2.25
3.38
3.75
4.50
6.75
9.00
18.00
6.50
9.80
2.25
3.38
3.75
4.50
6.75
9.00
18.00
140
140
140
140
140
140
140
64
145
178
257
578
4-1393788-1
4-1393788-2
3-1393788-3
3-1393788-5
3-1393788-9
3-1393788-6
3-1393788-7
10.90
13.00
19.60
26.15
52.30
12
24
1029
4114
THT latching 2 overmolded coils
V23079-B2219-B301
V23079-B2218-B301
V23079-B2208-B301
V23079-B2201-B301
2
2.4
3
1.50
1.80
2.25
3.75
4.30
5.20
6.50
1.50
1.80
2.25
3.75
140
140
140
140
28
41
64
1-1422002-2
1-1422002-1
1-1422002-0
1422002-9
5
10.90
178
THT latching 1 standard coil
V23079-C1108-B301
V23079-C1111-B301
V23079-C1101-B301
V23079-C1102-B301
V23079-C1106-B301
V23079-C1103-B301
V23079-C1105-B301
3
4.5
5
6
9
2.25
3.38
3.75
4.50
6.75
9.00
18.00
9.20
13.85
15.33
18.50
27.75
37.00
74.00
2.25
3.38
3.75
4.50
6.75
9.00
18.00
70
70
70
70
70
70
70
128
289
357
5-1393788-3
5-1393788-4
4-1393788-5
4-1393788-7
5-1393788-1
4-1393788-8
5-1393788-0
514
1157
2057
8228
12
24
SMT long pins, non-latching, standard coil
V23079-D1008-B301
V23079-D1008-B301
V23079-D1008-B301
V23079-D1008-B301
V23079-D1008-B301
V23079-D1008-B301
V23079-D1008-B301
3
4.5
5
6
9
2.25
3.38
3.75
4.50
6.75
9.00
18.00
6.50
9.80
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
64
145
178
257
578
6-1393788-1
6-1393788-2
5-1393788-5
5-1393788-6
5-1393788-9
5-1393788-7
5-1393788-8
10.90
13.00
19.60
26.15
52.30
12
24
1029
4114
SMT long pins, non-latching, overmolded coil
V23079-D2008-B301
V23079-D2011-B301
V23079-D2001-B301
V23079-D2002-B301
V23079-D2006-B301
V23079-D2003-B301
3
4.5
5
6
9
2.25
3.38
3.75
4.50
6.75
9.00
6.50
9.80
10.90
13.00
19.60
26.15
0.30
0.45
0.50
0.60
0.90
1.20
140
140
140
140
140
140
64
145
178
257
578
4-1393789-7
4-1393789-8
4-1393789-3
4-1393789-4
4-1393789-6
4-1393789-5
12
1029
Further coil versions are available on request.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
7 of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Coil Data (values at 23 °C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
Maximum
voltage Umin
voltage Umax
Vdc
Vdc
Vdc
Vdc
mW
Ω / 10 ꢀ
SMT long pins, latching, 2 standard coils
V23079-E1219-B301
V23079-E1218-B301
V23079-E1208-B301
V23079-E1211-B301
V23079-E1201-B301
V23079-E1202-B301
V23079-E1206-B301
V23079-E1203-B301
V23079-E1205-B301
2
2.4
3
4.5
5
6
9
12
24
1.50
1.80
2.25
3.38
3.75
4.50
6.75
9.00
18.00
4.33
5.20
6.50
1.50
1.80
2.25
3.38
3.75
4.50
6.75
9.00
18.00
140
140
140
140
140
140
140
140
140
28
41
64
145
178
257
578
1029
4114
1-1422007-0
1422007-5
7-1393788-1
7-1393788-2
6-1393788-8
1393789-5
1393789-9
6-1393788-9
7-1393788-0
9.80
10.90
13.00
19.60
26.15
52.30
SMT long pins, latching, 2 overmolded coil
V23079-E2219-B301
V23079-E2218-B301
V23079-E2208-B301
V23079-E2201-B301
2
2.4
3
1.50
1.80
2.25
3.75
4.33
5.20
6.50
1.50
1.80
2.25
3.75
140
140
140
140
28
41
64
1422007-6
1422007-9
1422007-8
1422007-7
5
10.90
178
SMT long pins, latching, 1 standard coil
V23079-F1108-B301
V23079-F1111-B301
V23079-F1101-B301
V23079-F1102-B301
V23079-F1106-B301
V23079-F1103-B301
V23079-F1105-B301
3
4.5
5
6
9
12
24
2.25
3.38
3.75
4.50
6.75
9.00
18.00
9.20
13.85
15.33
18.50
27.75
37.00
74.00
2.25
3.38
3.75
4.50
6.75
9.00
18.00
70
70
70
70
70
70
70
128
289
357
7-1393788-5
1-1393788-4
7-1393788-3
1-1393789-0
1-1393789-2
7-1393788-9
1-1393789-1
514
1157
2057
8228
SMT short pins, non-latching, standard coil
V23079-G1008-B301
V23079-G1011-B301
V23079-G1001-B301
V23079-G1002-B301
V23079-G1006-B301
V23079-G1003-B301
V23079-G1005-B301
3
4.5
5
6
9
12
24
2.25
3.38
3.75
4.50
6.75
9.00
18.00
6.50
9.80
0.30
0.45
0.50
0.60
0.90
1.20
2.40
140
140
140
140
140
140
140
64
145
178
257
578
1029
4114
8-1393788-0
1-1393789-7
7-1393788-6
1-1393789-5
1-1393789-6
7-1393788-7
7-1393788-8
10.90
13.00
19.60
26.15
52.30
SMT short pins, non-latching, overmolded coil
V23079-G208-B301
V23079-G2016-B301
V23079-G2011-B301
V23079-G2001-B301
V23079-G2002-B301
V23079-G2006-B301
V23079-G2003-B301
3
4.5
5
6
9
12
24
2.25
3.00
3.38
3.75
4.50
6.75
9.00
6.50
8.70
9.80
10.90
13.00
19.60
26.15
0.30
0.40
0.45
0.50
0.60
0.90
1.20
140
140
140
140
140
140
140
64
114
145
178
257
578
1029
5-1393789-4
1393790-5
5-1393789-5
4-1393789-9
5-1393789-0
5-1393789-3
5-1393789-1
SMT long pins, latching, 2 standard coils
V23079-H1208-B301
V23079-H1211-B301
V23079-H1201-B301
V23079-H1202-B301
V23079-H1206-B301
V23079-H1203-B301
V23079-H1205-B301
3
2.25
3.38
3.75
4.50
6.75
9.00
18.00
6.50
9.80
2.25
3.38
3.75
4.50
6.75
9.00
18.00
140
140
140
140
140
140
140
64
145
178
257
578
1029
4114
2-1393789-4
8-1393788-4
2-1393789-0
2-1393789-1
2-1393789-3
8-1393788-3
2-1393789-2
4.5
5
10.90
13.00
19.60
26.15
52.30
6
9
12
24
SMT long pins, latching, 1 standard coils
V23079-J1108-B301
V23079-J1111-B301
V23079-J1101-B301
V23079-J1102-B301
V23079-J1103-B301
V23079-J1105-B301
3
2.25
3.38
3.75
4.50
9.00
18.00
9.20
13.85
15.33
18.50
37.00
74.00
2.25
3.38
3.75
4.50
9.00
18.00
70
70
70
70
70
70
128
289
357
514
2057
8228
2-1393789-9
3-1393789-0
2-1393789-5
2-1393789-6
2-1393788-7
2-1393789-8
4.5
5
6
12
24
SMT short pins, non-latching, 1 overmolded coil high dielectric
V23079-G2008-X079
V23079-G2001-X071
V23079-G2002-X072
V23079-G2006-X073
V23079-G2003-X074
3
5
2.25
3.75
4.50
6.75
9.00
6.10
10.10
12.10
18.20
24.20
0.30
0.50
0.60
0.90
1.20
200
200
200
200
200
45
125
180
405
720
1422006-5
1422006-1
1422006-2
1422006-3
1422006-4
6
9
12
Further coil versions are available on request.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
ꢂ of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Contact Data
Number of contacts and type
Contact assembly
2 changeover contacts
Bifurcated contacts
Contact material
Silver nickel, gold-covered
Limiting continuous current at max. ambient temperature
Maximum switching current
Maximum swichting voltage
2 A
5 A
220 Vdc
250 Vac
Maximum switching capacity
60 W, 62.5 VA
< 10 µV
Thermoelectric potential
Minimum switching voltage
100 µV
Initial contact resistance / measuring condition: 10 mA / 20 mV
< 50 mΩ
typ. 5 x 107 operations
typ. 1 x 107 operations
typ. 5 x 105 operations
typ. 1 x 106 operations
typ. 2 x 105 operations
Electrical endurance at 12 V / 10 mA
at 6 V / 100 mA
at 60 V / 500 mA
at 30 V / 1000 mA
at 30 V / 2000 mA
Mechanical endurance
UL contact ratings
typ. 108 operations
220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
Max. DC Load Breaking Capacity
resistive load
DC current [A]
All specifications subject to change. Consult Tyco Electronics for latest specifications.
9 of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Insulation
Standard Version
High dielectric Version
Insulation resistance at 500 Vdc
> 109 Ω
> 109 Ω
Dielectric test voltage (1 min)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
between open contacts
1500 Vrms
1000 Vrms
1000 Vrms
1500 Vrms
1500 Vrms
1500 Vrms
Surge voltage resistance
according to Telcordia TR-NWT-001089 (2 /10 µs)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
2500 V
2500 V
2000 V
2500 V
2500 V
2500 V
between open contacts
according to FCC 68 (10/160 µs)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
1500 V
1500 V
1500 V
between open contacts
Insulation according to IEC / EN 60950
Clearance
Basic insulation
1.3 mm
Creepage distance
2.5 mm
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 2 pF
max. 1.5 pF
max. 1 pF
RF Characteristics
Isolation at 100 MHz / 900 MHz
Insertion loss at 100 MHz / 900 MHz
V.S.W.R. at 100 MHz / 900 MHz
- 39.0 dB / - 20.7 dB
- 0.02 dB / - 0.27 dB
1.04 / 1.40
General Data
3 ms / 4 ms
3 ms / 4 ms
Operate time at Unom typ. / max.
Reset time (latching) at Unom , typ. / max.
Release time without diode in parallel (non-latching), typ. / max.
Release time with diode in parallel (non-latching), typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
2 ms / 4 ms
4 ms / 6 ms
1 ms / 3 ms
50 operations/s
-40 °C ... +85 °C
< 125 K/W
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
125 °C
35 G
10 to 1000 Hz
Shock resistance, half sinus, 11 ms
50 G (function)
150 G (damage)
Degree of protection / Environmental protection
Needle flame test
immersion cleanable, IP 67 / RT III
application time 20 s, no burning < 15s
Mounting position
any
Processing information
Ultrasonic cleaning is not recommended
Weight (mass)
max. 2.8 g
SnCu 0.7
MSL 3
Terminal surface
Moisture sensitive level (JEDEC J-STD-020B) - SMD types
Resistance to soldering heat
265 °C / 10 s
All data refers to 23 °C unless otherwise specified.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
10 of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Recommended Soldering Conditions
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020B
Full line:
typical
20 - 40 sec
Dotted line: process limits
240 °C
180 °C
130 °C
100 °C
forced
cooling
Vapor Phase Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Time (s)
Recommended reflow soldering profile
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Time (s)
Resistance to soldering heat - Reflow profile
Infrared Soldering: Temperature/Time Profile
(Lead and Housing Peak Temperature)
Time (s)
All specifications subject to change. Consult Tyco Electronics for latest specifications.
11 of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
Packing
Dimensions in mm
Tube for THT version
50 relays per tube
2‘000 relays per box
Tape and reel for SMT
version
with long terminals
400 relays per reel
2‘000 relays per box
Tape and reel for SMT
version with short
terminals
500 relays per reel
2‘500 relays per box
Reel dimension
All specifications subject to change. Consult Tyco Electronics for latest specifications.
12 of 14
AXICOM
Telecom-, Signal and RF Relays
108-98002 Rev. D
P2 V23079 Relay
IM Relays
D2n Relays
4th generation slim line – low profile polarized 2 c/o telecom relay with
bifurcated contacts, available as non latching or latching relay with 1
coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of
50 ... 200 mW, latching relays with 1 coil 100 mW. The IM relay is availa-
ble as through hole and surface mount type (J-Legs and Gull Wings)
and capable to switch loads up to 60 W/62,5 VA. It is currently the only
2 A rated 4G relay on the market. Dielectric strength fulfills the Telcordia
requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68
(1,5 kV – 10 / 160 µs). The IM relay is tested according CECC/IECQ and
certified in accordance with IEC/EN 60950 and UL 60950. Dimensions
approx. 10 x 6 mm board space and 5.65 mm height.
2nd generation non polarized 2 c/o relay for telecom and various
other applications. Nominal voltage range from 3 ... 48 V, coil pow-
er consumption from 150 .... 500 mW. The D2n relay is capable to
switch currents up to 3 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 20
x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay
with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power
consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay
is available as through hole or surface mount type and capable to
switch currents up to 1 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 13
x 7,6 mm board space and 7 mm height for THT or 8 mm height for
SMT version.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 24 V, coil power consumption 140 mW, lat-
ching relays with 1 coil 70 mW. The P2 Relay is available as through
hole or surface mount type and capable to switch currents up to 5 A.
Dielectric strength fulfills the Telcordia requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The P2
relay is tested according CECC/IECQ and certified in accordance with
IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board
space and 10 mm height.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW, sen-
sitive versions 200 mW. The W11 relay is capable to switch currents
up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x
10,6 mm board space and 11,5 mm height.
FX2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for
the high sensitive version, 140... 300 mW for the standard version,
latching relays with 1 coil 100 mW. The FX2 relay is available as
through hole type and capable to switch loads up to 60 W/62,5 VA.
Dielectric strength fulfills the Telcordia requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The
FX2 relay is tested according CECC/IECQ and certified in accordance
with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm
board space and 10,7 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other
applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal
voltage range from 5 ... 24 V, coil power consumption 50...280 mW
for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are
available in DIP or SIL housing and capable to switch currents up to
0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric
strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and
5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm
height for SIL version.
Cradle Relays
FT2 / FU2 Relays
Extremely reliable and mature relay family of 1st generation for
various signal switching applications. Available as non polarized,
polarized / latching and relay with AC coil. The benefit is the possibility
of combining various contact sets from 1 up to 6 poles, single and bi-
furcated contacts, different contact materials with a coil voltage range
from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected
and hermetically sealed versions, with plug in or solder terminals
and are capable to switch currents up to 5 A. Forcibly guided (linked)
contact sets optional. Dielectric strength 500 Vrms. Dimensions from
approx. 19 x 24 to 19x35 mm board space and 30 mm height.
3rd generation non polarized, non latching 2 c/o telecom relay with
bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power
consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as
through hole and surface mount type. Dielectric strength fulfills the
Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 relay is tested according
CECC/IECQandcertifiedinaccordancewithIEC/EN60950andUL60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 48 V, coil power consumption of 80 ... 260
mW for the high sensitive version, 140... 300 mW for the standard
version, latching relays with 1 coil 100 mW.. The FP2 Relay is available
as through hole type and capable to switch loads up to 60 W/62,5 VA.
Dielectric strength fulfills FCC part 68 (1,5 kV – 10 / 160 µs). The FP2
is tested according CECC/IECQ approved. Dimensions approx. 14 x
9 mm board space and 5 mm height.
Other Relays
We offer a variety of different relay families for maintenance and
replacement purposes. These relays are up to 60 years old now, such
as Card Relay SN (V23030 / V23031 series), Small General Purpose
Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and
V23163 ... V23167 series). Accessories like sockets, hold down springs,
etc. optional.
HF3 Relay
High performance low cost RF relay with excellent RF characteristics.
Available with an impedance of 50 and 75 Ohm. Suitable for frequen-
cies up to 3 GHz. Actually smallest RF relay available combining small
size, excellent RF performance and SMD solderability. Available as non
latching or latching relay with 1 or 2 coils and a nominal coil voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.
MT2
2nd generation non polarized, non latching 2 c/o telecom and si-
gnal relay with bifurcated contacts. Nominal voltage range from
3 ... 48 V, coil power consumption 150/200/300/400 and 550 mW.
Dielectric strength fulfills the requirements according FCC part 68
(1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x 10 mm board space and 11 mm height.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
13 of 14
Tyco Electronics Logistics AG
Werk Axicom Au
Seestrasse 295
CH-8804 Au-Wädenswil / Switzerland
Phone +41 44 782 91 11
Fax
+41 44 782 90 00
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax
+49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752
相关型号:
©2020 ICPDF网 联系我们和版权申明