WP-381381-2.5-9_技术文档

RoHS

Ready

Products for

Mobile Equipment

T YC O E L E C T R O N I C S “ T E C H N O LO G Y P O R T F O L I O ”

● Connector Systems /

● Antennas, GPS Antennas,

● Battery Connectors &

Electromechanical Components

Integrated Antenna Systems

Assemblies

● Relays

● Circuit Protection Devices

● Tubing & Harnessing Products

● Touch Screen Displays

● Power Systems

● Heat Sinks & Thermal Solutions

● Switches and Knobs

● Wireless Products

● Sensors

● Identification Labeling Products

● Racks & Panels

● Fiber Optic Products

● Wire & Cable

● Application Tooling

● Electronic Modules

● Smart Cards / Leadframes

● Resistors & Inductors

T YC O E L E C T R O N I C S “AT YO U R S E R V I C E ”

Tyco Electronics Online

The Tyco Electronics website is an innovative and

@

interactive source for application information,

product updates and technical solutions.

Our step-by-step software makes our website

intuitive and user-friendly to better serve you!

Please contact us at:

www.tycoelectronics.com

Internet Homepage

www.tycoelectronics.com

Product Information Center

(PIC)

You can rely on Tyco Electronics PIC Team to

provide you support for answers to your

general information or technical questions in

an efficient and effective manner.

Electronic Internet Catalog

www.catalog.tycoelectronics.com

To reach our PIC staff, please contact your

local Tyco Electronics organization.

Product Literature

For more information about Tyco Electronics and its wide range of products we offer you a variety of literature such as

product catalogs and a lot of product specific brochures.

For catalogs and product brochures please contact your local Tyco Electronics organization.

1

All specifications subject to change. Consult Tyco Electronics for latest specifications.

2

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Introduction

Tyco Electronics supplies a unique expertise for today’s and tomorrow’s mobile equipment

applications, including cellular phones, mobile media players, digital camera’s, GPS, payment

terminals and other portable electronics.

We also provide high-level analyses and simulation services to allow OEMs to predict system

performance, resulting in faster design cycles and lower costs. In addition our early involvement

programs allow us to design next-generation products to support equipment requiring more

speed, higher density and lower costs.

Our wide product portfolio for mobile equipment ranges from a variety of connectors (SIM, I/O,

Battery, Camera, LCD, Board-to-Board, FPC etc.) to battery packs, antennas circuit protection,

cable assemblies and others.

In addition to that Tyco Electronics offers a set of technologies especially developed to offer low

applied cost products to our customers in example MID technology (Molded Interconnection

Device).

We have several dedicated Mobile Equipment engineering teams to provide you with the best

service from persons which understand the way you are doing business.

The teams are dedicated to your success and are located in several regions of the world. These

regions are fully equipped with all necessary services such as quick turn sample shop, simulation

equipment, test laboratories and others.

Our standard offering is broad and reflected in this catalog. Therefore we are pleased to introduce

you to our portfolio for mobile equipment.

10 Reasons to Choose Tyco Electronics for Mobile Equipment Applications

1. Tyco Electronics is committed to customer success!

2. Wide range of products applicable for mobile equipment.

3. Global Sales, Logistics, Development and manufacturing teams in all regions of the world.

4. The most innovative connector company in the industry.

5. Low cost manufacturing locations around the globe.

6. Working with 8 of the top 10 OEM’s.

7. Dedicated development teams for mobile equipment.

8. Wide range of (patented) technologies which enable reduction of applied cost.

9. Organization adopted to working with mobile equipment OEM’s and ODM’s.

10. Our commitment is your advantage.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

3

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Restriction on the Use of Hazardous Substances (RoHS) . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

4

6

Connectors

Generic SIM Connector, 6 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Generic SIM Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-Directional SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

8

9

Scaleable SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Super Low Profile SIM Connector with Full Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Mini UICC SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Sliding SIM Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector . . . . . . . . . . . . . . . . 14

0.3 mm FPC Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Circular Audio Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Circular DC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Mini USB Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Mini USB Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Micro USB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Generic Snake and Pad Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Multi Media Interface Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

MDIC and S-MDIC Connector System, 12 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

HDMI Connectors, Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Memory Card Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Micro SD Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Micro SD/SIM Combi Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Micro SD Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Spring Probe Connector (SPC), 1 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Spring Fingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

LCD ITO Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

LCD Connector 0.65 mm, 10 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Standard Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Standard Switching Coax Test Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Standard Switching Coax Right-Angle Cable Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Standard Switching Coax with ESD Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

MID Micro Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

MID Nano Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Spring Probe Connector (SPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Generic Battery Connector, 2 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

1.6 mm Pitch Low Profile Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Right-Angle Leaf Spring Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Battery Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Inboard SMIA 85 Camera Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Onboard SMIA 85 Camera Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Super Low Profile (SLP) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Micro SLP Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

STAX™ LD Elastomeric Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

STAX™ Array Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Elastiboot™ Connectors for Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

STAX™ Elastomeric Connectors for COG LCDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

SMT-ETI-1 STAX™ Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

STAX™ Coax Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Vibration Motor Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

4

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Table of Contents (continued)

Antenna Products

Catalog 1654270-2

Revised 8-2007

Antenna Manufacturing Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

RF Engineering Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

MID Technology

MID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Cable Products

USB Data Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Music Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Charger Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Mobile Phone Headset Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Bluetooth Hands-Free Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

High-Speed Micro-Coax Cable Assembly (MCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Batteries

Battery Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Mechatronic Center Niefern

Technology Portfolio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

LAMFRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Mini SIM Card Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

M/A-COM Antenna Products

GaAs SP6T 2.5 V Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Raychem Circuit Protection Products

Lithium Cells and Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Rechargeable Battery Pack Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Portable Electronics Input Port Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Strap Battery Devices – VLR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Strap Battery Devices – VLP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Strap Battery Devices – VTP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Strap Battery Devices – LTP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Strap Battery Devices – LR4 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Strap Battery Devices – SRP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Surface-Mount Devices – nanoSMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Surface-Mount Devices – microSMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Surface-Mount Devices – miniSMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Surface-Mount Devices – miniSMDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Fast Acting Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Slow Blow Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

ESD Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Switches

FSM 6 x 6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

FSMCT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

FSM 3.4 x 6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

FSM 0.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Turtle Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

CoinKey™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Labels

MP Metalized Polyester Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Kapton^®Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

WP White Polyester Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

All specifications subject to change. Consult Tyco Electronics for latest specifications.

5

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Restriction on the Use of Hazardous Substances (RoHS)

At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more

than 1.5 million end items/components for RoHS compliance, and issued new part numbers

where any change was required to eliminate the restricted materials. Part numbers in this catalog

are identified as:

Restriction on the Use

of Hazardous Substances

(RoHS)

RoHS Compliant

Part numbers in this catalog are RoHS Compliant, unless marked otherwise.

These products comply with European Union Directive 2002/95/EC as amended 1 January 2006

that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain

electrical and electronic products sold into the EU as of 1 July 2006.

Note: For purposes of this Catalog, included within the definition of RoHS Compliant are products

that are clearly “Out of Scope” of the RoHS Directive such as hand tools and other non-electrical

accessories.

Non-RoHS Compliant

These part numbers are identified with a “ꢀ” symbol. These products do not comply with the

material restrictions of the European Union Directive 2002/95/EC.

5 of 6 Compliant

A “ꢁ” symbol identifies these part numbers. These products do not fully comply with the European

Union Directive 2002/95/EC because they contain lead in solderable interfaces (they do not

contain any of the other five restricted substances above allowable limits). However, these prod-

ucts may be suitable for use in RoHS applications where there is an application-based exception

for lead in solders, such as the server, storage, or networking infrastructure exemption.

Note: Information regarding RoHS compliance is provided based on reasonable inquiry of our

suppliers and represents our current actual knowledge based on the information provided by our

suppliers. This information is subject to change. For latest compliance status, refer to our website

referenced below.

Getting the Information You Need

Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your

questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available

with links to more detailed information. You can also submit RoHS questions and receive a

response within 24 hours during a normal work week. The Support Center also provides:

■ Cross-Reference from Non-compliant to Compliant Products

■ Ability to browse RoHS Compliant Products in our on-line catalog:

RoHS

http://ecommas.tycoelectronics.com/commerce/alt/RohsAltHome.do

Customer

■ Downloadable Technical Data Customer Information Presentation

Support

■ More detailed information regarding the definitions used above

Center

So whatever your questions when it comes to RoHS, we’ve got the

answers at www.tycoelectronics.com/leadfree

6

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Generic SIM Connector, 6 Positions

Generic SIM Connector,

6 Positions

Features

SIM (Security Identity Module)

and UIM (Universal Identity

Modules) cards have been and

continue to be used in mobile

equipment. Tyco Electronics

offers a wide selection of low

cost SMT SIM connectors with

heights from 1.9 mm to 4.0 mm

depending on your height

requirements. Several variations

have been tooled with and

without ribs or positive stop

(contact retention feature).

This product works with SIM

cards of Generation 1, 2 and 3.

2.54

All variations are packaged in

tape & reel for pick and place

manufacturing.

Dim. B

7.5 8.5

2.54

1.5

Ribs

11.7

7.0

Material and Finish

Insulator:

LCP, glass-filled, black color

1.0

2.54

1.7

Height

Contact Pin:

Phosphor bronze

PCB Layout

Contact Plating:

Selectively gold over nickel plated

Part Numbers

Package

Quantity

(Pieces

Height

(mm)

without Contact Retention

with Contact Retention

with Ribs

Documentation

Drawing:

C-338063

per Reel)

with Ribs

without Ribs

1-1483437-9

2-1483437-0

2-1483437-1

2-1483437-2

2-1483437-3

2-1483437-4

2-1483437-5

2-1483437-6

2-1483437-7

2-1483437-8

2-1483437-9

3-1483437-0

3-1483437-1

3-1483437-2

3-1483437-3

3-1483437-4

3-1483437-5

3-1483437-6

3-1483437-7

3-1483437-8

3-1483437-9

4-1483437-0

1.9

2.0

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

2.9

3.0

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

3.9

4.0

1-338063-9

2-338063-0

2-338063-1

2-338063-2

2-338063-3

2-338063-4

2-338063-5

2-338063-6

2-338063-7

2-338063-8

2-338063-9

3-338063-0

3-338063-1

3-338063-2

3-338063-3

3-338063-4

3-338063-5

3-338063-6

3-338063-7

3-338063-8

3-338063-9

4-338063-0

1-1377227-9

2-1377227-0

2-1377227-1

2-1377227-2

2-1377227-3

2-1377227-4

2-1377227-5

2-1377227-6

2-1377227-7

2-1377227-8

2-1377227-9

3-1377227-0

3-1377227-1

3-1377227-2

3-1377227-3

3-1377227-4

3-1377227-5

3-1377227-6

3-1377227-7

3-1377227-8

3-1377227-9

4-1377227-0

1-1483288-9

2-1483288-0

2-1483288-1

2-1483288-2

2-1483288-3

2-1483288-4

2-1483288-5

2-1483288-6

2-1483288-7

2-1483288-8

2-1483288-9

3-1483288-0

3-1483288-1

3-1483288-2

3-1483288-3

3-1483288-4

3-1483288-5

3-1483288-6

3-1483288-7

3-1483288-8

3-1483288-9

4-1483288-0

1400

1140

Product Specification:

108-19122

Test Report:

501-19011

Application Specification:

114-19054

Bold Part Numbers are tooled

All specifications subject to change. Consult Tyco Electronics for latest specifications.

7

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Generic SIM Connector, 8 Positions

Generic SIM Connector,

8 Positions

Features

SIM (Security Identity Module)

and UIM (Universal Identity

Modules) cards have been and

continue to be used in mobile

equipment. Tyco Electronics

offers a wide selection of low

cost SMT SIM connectors with

heights from 1.9 mm to 4.0 mm

depending on your height

requirements.

All variations are packaged in

tape & reel for pick and place

manufacturing.

2.54

Material and Finish

Insulator:

LCP, glass-filled, black color

10.1

max.

7.62

Contact Pin:

Phosphor bronze

Contact Plating:

Selectively gold over nickel plated

Documentation

11.7

Dim. B

Drawing:

C-338123

2.54

Product Specification:

108-19122

1.9

Height

Test Report:

7.62

501-19011

Application Specification:

7.0

114-19054

1.5

11.95 max.

1.7

PCB Layout

Package

Quantity

(Pieces/Reel)

Package

Quantity

(Pieces/Reel)

Part

Number

Part

Number

Height

(mm)

Height

(mm)

1.9

2.0

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

2.9

1-338123-9

2-338123-0

2-338123-1

2-338123-2

2-338123-3

2-338123-4

2-338123-5

2-338123-6

2-338123-7

2-338123-8

2-338123-9

1100

3.0

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

3.9

4.0

3-338123-0

3-338123-1

3-338123-2

3-338123-3

3-338123-4

3-338123-5

3-338123-6

3-338123-7

3-338123-8

3-338123-9

4-338123-0

890

1100

890

1100

890

1100

890

1100

890

1100

890

1100

890

1100

890

1100

890

1100

890

Bold Part Number is tooled

8

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

5-Directional SIM Connector

5-Directional

SIM Connector

Features

Can be mated from 5 directions,

left, right, front, back and top.

The completely deep drawn

contact nose provides smooth

insertion and minimal card wear

under any condition.

Height range from 1.5 mm to

5.0 mm possible, while maintain-

ing 0.5 mm contact deflection

(GSM Specification).

This product works with SIM

cards of Generation 1, 2 and 3.

7.6

Material and Finish

Insulator:

GF liquid crystal polymer,

black color

10.0

Dim. B

Contact Pin:

Copper alloy

2.54

Contact Plating:

1.2 µm nickel underlayer,

1.25 µm gold at card side,

0.1–0.2 µm gold at solder side

1.0

2.54

Documentation

Drawing:

2.0

0.1

Dim. A

C-1705300

PCB Layout

Package

0.5

Product Specification:

108-19280

Test Report:

501-19095

Package

Quantity

(Pieces/Reel)

Dimensions (mm)

Part

Number

Part

Quantity

Number

A

B

A

B

(Pieces/Reel)

Application Specification:

1.5

1.6

1.7

1.8

1.9

2.0

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

2.9

3.0

3.1

3.2

7.7

7.6

7.5

7.3

7.2

7.0

6.7

7.7

7.5

7.2

6.9

7.7

7.4

7.0

7.7

1-1705300-5

1-1705300-6

1-1705300-7

1-1705300-8

1-1705300-9

2-1705300-0

2-1705300-1

2-1705300-2

2-1705300-3

2-1705300-4

2-1705300-5

2-1705300-6

2-1705300-7

2-1705300-8

2-1705300-9

3-1705300-0

3-1705300-1

3-1705300-2

1450

1150

3.3

3.4

3.5

3.6

3.7

3.8

3.9

4.0

4.1

4.2

4.3

4.4

4.5

4.6

4.7

4.8

4.9

5.0

7.3

6.7

7.6

7.1

7.6

7.1

7.5

6.8

7.5

6.8

7.6

6.8

7.7

6.9

7.6

6.6

7.6

6.6

3-1705300-3

3-1705300-4

3-1705300-5

3-1705300-6

3-1705300-7

3-1705300-8

3-1705300-9

4-1705300-0

4-1705300-1

4-1705300-2

4-1705300-3

4-1705300-4

4-1705300-5

4-1705300-6

4-1705300-7

4-1705300-8

4-1705300-9

5-1705300-0

1450

950

800

114-19092

Bold Part Numbers are tooled

All specifications subject to change. Consult Tyco Electronics for latest specifications.

9

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Scaleable SIM Connector

Features

Scaleable SIM connector height

from 0.7 mm to 2.0 mm (housing

height), featuring two different

kind of clips.

1 clip allover (1 piece clip design).

The one piece clip design

prevents for card bow.

2 piece clip design allows easy

removal of the SIM card.

Both versions have contact

retention (anti lifting) features

and smooth rounded contacts

in order to decrease card wear

to the minimum.

Material and Finish

Insulator:

GF liquid crystal polymer,

black color

Contact Pin:

Copper alloy

Part Numbers

Total

Height

(mm)

Housing

Height

(mm)

Contact Plating:

SIM with Card Stop

Clip Allover

(1000 Pieces per Reel)

SIM without Card Stop

Clip Allover

(750 Pieces per Reel)

SIM without Card Stop

2-Piece Clip

(1100 Pieces per Reel)

1.2 µm nickel underlayer,

1.25 µm gold at card side,

0.1–0.2 µm gold at solder side

1.9

2.0

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

2.9

3.0

3.1

3.2

0.7

0.8

0.9

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2.0

-1747314-1

–

Clip:

–

Stainless steel/phosphor bronze

-1871406-1

–

Clip Plating:

3.0 µm Sn allover,

over 1.3 µm nickel underlayer

–

2-292292-4

2-292292-5

2-292292-6

2-292292-7

2-292292-8

2-292292-9

3-292292-0

3-292292-1

–

1-1705615-3

1-1705615-4

1-1705615-5

1-1705615-6

1-1705615-7

1-1705615-8

1-1705615-9

2-1705615-0

2-292373-6

2-292373-7

2-292373-8

2-292373-9

3-292373-0

3-292373-1

3-292373-2

Bold Part Numbers are tooled

Documentation

Customer Drawing

Product Specification

Test Report

Part No. 1705615

C-1705615

Part No. 292292

C-292292

Part No. 292373

C-292373

Part No. 1747314

C-1747314

108-5998

108-19241

108-60031

501-19069

501-60001

501-5559

Application Specification

114-19075

not available

10

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Super Low Profile SIM Connector with Full Clip

Super Low Profile

SIM Connector with Full Clip

Features

• Connector Height = 1.55 mm

max.

• Size (H x W x L): 1.43 x 16.3 x

17.5 mm

• Big clip totally encapsulates

SIM contact area

• Soldered clips provide additional

mechanical stability

• Datecode printed on the product

Material and Finish

Housing:

LCP

Contacts:

Copper alloy 1.3 µm nickel underlayer

0.4 µm gold in the contact area and

0.05 µm gold in the soldering area

Clip:

Stainless steel 1.3 µm nickel under-

layer, tin plated all over

16.3

Documentation

Drawing:

C-1981898

Product Specification:

108-78472

Test Report:

See Product Specification

Application Specification:

114-19075

17.5

17.0

0.5 typ.

2.54

1.43

Part No. 1981898-1

Package Quantity:

1000 pcs per reel

All specifications subject to change. Consult Tyco Electronics for latest specifications.

11

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Mini UICC SIM Connector

Features

This sliding SIM connector has

been developed for usage with

third generation SIM cards.

The scaleable connector is avail-

able in heights from 1.2 mm to

1.9 mm (housing height). The

forky contact provides a preload

as well as anti lifting capabilities.

The smooth and rounded con-

tacts ensure minimal card wear,

while the clip keeps the card in

position during usage.

Material and Finish

Insulator:

8.1

3.9

GF liquid crystal polymer,

black color

Contact Pin:

Copper alloy

Contact Plating:

1.2 µm nickel underlayer,

1.25 µm gold at card side,

0.1–0.2 µm gold at solder side

13.4

12.9

Clip:

Stainless steel

11.3

7.7

5.0

Clip Plating:

3.0 µm Sn allover,

over 1.3 µm nickel underlayer

2.89

5.43

7.97

2.54

12.1

13.4

1.0

Documentation

Drawing:

C-1705813

13.4

Product Specification:

108-19241

0.9

Test Report:

501-19069

2.7

1.6

2.77

2.2

Application Specification:

PCB Layout

114-19075

Package

Quantity

(Pieces/Reel)

Part

Number

Total Height

(mm)

Housing Height

(mm)

1.9

2.4

2.5

2.6

2.7

2.8

2.9

3.0

3.1

0.7

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

1-1827465-1

1-1705813-2

1-1705813-3

1-1705813-4

1-1705813-5

1-1705813-6

1-1705813-7

1-1705813-8

1-1705813-9

1000

Bold Part Numbers are tooled

12

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Sliding SIM Connector, 8 Positions

Sliding SIM Connector,

8 Positions

Features

SIM (Security Identity Module)

and UIM (Universal Identity

Modules) cards have been and

continue to be used in mobile

equipment.

Tyco Electronics offers a wide

selection of low cost SMT sliding

SIM connectors.

Material and Finish

Insulator:

Thermoplastic HT, UL 94 V-0 rated,

black color

15.7

Contact Pin:

Copper alloy

2.65

11.8

Contact Plating:

Selective gold over nickel plated

0.6

1.0

5.9

Clip:

∅ 0.6

Brass, tin over nickel plated

2.5

3.7

Documentation

Drawing:

7.62

16.4

C-1857118

2.54 typ.

∅ 0.8

∅ 0.9

0.9

13.3

8.0

0.78

Part No. 1857118-1

5.3

Package Quantity:

800 Pieces per Reel

0.2

11.41

1.55

PCB Layout

All specifications subject to change. Consult Tyco Electronics for latest specifications.

13

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector

0.4 mm Pitch

1.0 mm or 1.5 mm Height

Board-to-Board Connector

Features

1.0 mm or 1.5 mm mated height

low profile stacking connector.

Connector body width is only

2.7mm and enables space saving.

Formed contacts provide contact

points on rolled surface enabling

high reliability.

Multiple point contact system is

available (see note in table).

For the latest information please

contact your local sales engineer.

0.2n + 2.05

0.2n + 1.20

Material and Finish

Insulator:

Thermoplastic, black color

0.2n – 0.40

0.4 Pitch

Contact Pin:

Copper alloy

1.23

2.2 2.66

Contact Plating:

Gold plating over nickel underplating

Documentation

Drawing:

C-See table

0.2n + 2.1

0.2n + 1.2

0.2n – 0.4

Product Specification:

108-5901

0.4 Pitch

Test Report:

501-5570

1.26 2.2 2.7

Instruction Sheet:

411-78159

Stacking Height 1.0 mm

Stacking Height 1.5 mm

No. of

Positions

Prototype

Mass Pro-

duction Tool

Prototype

Tool

Mass Pro-

duction Tool

Plug

Receptacle

Plug

Receptacle

Tool

X

–

10

12

16

20

22

24

28

30

40

46

50

54

56

60

70

80

1-1871566-0

1-1871566-2

1-1871566-6

2-1871566-0

2-1871566-2

2-1871566-4

2-1871566-8

3-1871566-0

4-1871566-0

4-1871566-6

5-1871566-0

5-1871566-4

5-1871566-6

6-1871566-0

7-1871566-0

8-1871566-0

1-1747769-0

1-1747769-2

1-1747769-6

2-1747769-0

2-1747769-2

2-1747769-4

2-1747769-8

3-1747769-0

4-1747769-0

4-1747769-6

5-1747769-0

5-1747769-4

5-1747769-6

6-1747769-0

7-1747769-0

8-1747769-0

–

X

–

X

–

X

–

X

–

1-1871275-0

1-1871275-2

1-1871275-6

2-1871275-0

2-1871275-2

2-1871275-4

2-1871275-8

3-1871275-0

4-1871275-0

4-1871275-6

5-1871275-0

5-1871275-4

5-1871275-6

6-1871275-0

7-1871275-0

8-1871275-0

1-1871274-0

1-1871274-2

1-1871274-6

2-1871274-0

2-1871274-2

2-1871274-4

2-1871274-8

3-1871274-0

4-1871274-0

4-1871274-6

5-1871274-0

5-1871274-4

5-1871274-6

6-1871274-0

7-1871274-0

8-1871274-0

X

–

X

–

X

–

X

–

X

–

X

Stacking Height 1.0 mm: Plugs and Receptacles 4000 per Reel

Stacking Height 1.5 mm: Plugs and Receptacles 3000 per Reel

Please contact sales for other pin counts.

14

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

0.3 mm FPC Connector

Features

1.0 mm height low profile

and 3.8 mm width narrow FPC

connector for space saving.

FCP is securely connected with

easy one touch flip lever actuator.

For the latest information please

contact your local sales engineer.

Material and Finish

0.3n + 1.3

0.3n – 0.9

Insulator:

Thermoplastic

0.6 Pitch Ref.

0.12 typ.

Color:

Body: beige, Actuator: black

1.85

2.5

Contact Pin:

Copper alloy

Contact Plating:

Gold plating over nickel underplating

0.3 Pitch

0.3n – 0.3

0.3n + 0.6

Documentation

Drawing:

3.0

0.2

C-1746237

Product Specification:

0.9

108-5944

Test Report:

501-5647

Part Numbers

Back Flip Lock

No. of

Positions

Narrow Type

Standard Type

Front Flip Lock

11

13

15

17

19

21

23

25

27

29

31

33

35

37

39

41

43

45

47

49

51

53

55

57

0-1827827-1

0-1827827-2

0-1827827-3

0-1827827-4

0-1827827-5

0-1827827-6

0-1827827-7

0-1827827-8

0-1827827-9

1-1827827-0

1-1827827-1

1-1827827-2

1-1827827-3

1-1827827-4

1-1827827-5

1-1827827-6

1-1827827-7

1-1827827-8

1-1827827-9

2-1827827-0

2-1827827-1

2-1827827-2

2-1827827-3

2-1827827-4

0-1827674-1

0-1827674-2

0-1827674-3

0-1827674-4

0-1827674-5

0-1827674-6

0-1827674-7

0-1827674-8

0-1827674-9

1-1827674-0

1-1827674-1

1-1827674-2

1-1827674-3

1-1827674-4

1-1827674-5

1-1827674-6

1-1827674-7

1-1827674-8

1-1827674-9

2-1827674-0

2-1827674-1

2-1827674-2

2-1827674-3

2-1827674-4

0-1746237-1

0-1746237-2

0-1746237-3

0-1746237-4

0-1746237-5

0-1746237-6

0-1746237-7

0-1746237-8

0-1746237-9

1-1746237-0

1-1746237-1

1-1746237-2

1-1746237-3

1-1746237-4

1-1746237-5

1-1746237-6

1-1746237-7

1-1746237-8

1-1746237-9

2-1746237-0

2-1746237-1

2-1746237-2

2-1746237-3

2-1746237-4

Package Quantity: 4000 Pieces per Reel

Please contact sales for available pin counts.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

15

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Circular Audio Connectors

Features

Tyco Electronics offers several

circular Audio Connectors for

usage with 3.5 mm or 2.5 mm

diameter plug. The mounting

style, which can be either SMD

or compressive, where the

compressive style does not

require a solder connection and

is invulnerable for forces applied

to the connection.

Material and Finish:

See drawing

Documentation

Drawing:

See table

Product Specification:

See table

Test Report:

See table

Package

Quantity

Number

(Pieces)

Plug

Diameter

(mm)

Part

Connection

Style

Length

(mm)

Width

(mm)

Height

(mm)

Location

Pins

Product

Specification

Test

Report

Switch

¹⁾1705058-1¹⁾

1775250-1

4000 per Box

1000 per Reel

3000 per Box

50 per Tube

310 per Tray

55 per Tube

700 per Reel

200 per Tray

700 per Reel

250 per Tray

2.5

3.5

Compressive

13.5

11.6

06.8

12.7

14.2

14.0

14.2

13.5

15.0

07.2

07.7

11.6

13.0

09.2

09.0

09.2

06.0

10.8

5.0

3.0

5.0

4.5

5.0

7.3

Y

N/A

Y

108-19TBA

108-57570

108-57466

108-19190

108-57185

108-57147

108-57047

108-57296

108-57462

501-19TBA

501-57660

501-57536

501-19056

501-57175

501-57130

501-57121

501-57326

501-57399

501-57532

SMD

1470964-1

SMD

Y

¹⁾1377032-3²⁾

¹⁾1377032-2²⁾

1470033-1

Compressive

N/A

Y

Compressive

TH

1470164-1

Y

¹⁾0440217-1³⁾

¹⁾0440217-2⁴⁾

1470636-1

Y

1470636-2

Y

1470778-1

Y

0440343-1

Y

¹) Not yet tooled

²) Audio + DC, Application Specification 114-19046

³) Ring Color Silvery White

⁴) Ring Color Black

16

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Circular DC Connectors

Features

Tyco Electronics offers several

Circular DC Connectors for

usage with 3.5 mm or 2.5 mm

diameter plug.

The mounting style, which can

be either SMD or compressive,

where the compressive style does

not require a solder connection

and is invulnerable for forces

applied to the connection.

Material and Finish:

See drawing

Documentation

Drawing:

See table

Product Specification:

See table

Test Report:

See table

Package

Quantity

(Pieces)

DC Plug

Diameter

(mm)

Switch Diameter

(mm)

Part

Number

Connection Length

Width

(mm)

Height

(mm)

Location

Pins

Product

Specification

Test

Report

Style

(mm)

1470177-1

1470177-2

800 per Reel

1000 per Reel

3696 per Box

308 per Tray

3.5

2.5

SMD

9.3

8.0

5.2

5.3

5.0

4.5

Y

N

1.00

1.30

1.00

1.30

1.00

1.25

0.65

Y

108-57176

–

501-57187

–

1857353-1

SMD

9.3

8.0

Y

1857353-2

SMD

9.3

8.0

Y

–

¹⁾1377032-3¹⁾

¹⁾1377032-2¹⁾

¹⁾1483596-2²⁾

¹⁾1483596-1³⁾

Compressive

12.70

10.30

13.00

6.2

N/A

108-19190

108-19278

501-19056.

501-19TBA

6.2

¹) Audio + DC, Application Specification 114-19046

²) Application Specification 114-19091

³) Color Yellow

All specifications subject to change. Consult Tyco Electronics for latest specifications.

17

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Mini USB Plug

Features

Tyco Electronics offers a

complete range of (Mini) USB

receptacles, cables and plugs.

The system is fully compliant

with the USB specification and

supports data transmission

speeds >USB 2.0 full speed.

Material and Finish

Insulator:

LCP, glass-filled, black color

Contact Pin:

Phosphor bronze

Contact Plating:

Selectively plated gold over nickel

Documentation

Drawing:

C-1734205

Product Specification:

108-57062

Test Report:

501-57070

Mini B Plugs

Package

Quantity

(Pieces)

No. of

Type

Part

Number

Color

Description

Contacts

4

Mini B

Black

Mini B Plug with Contact Insert 4 Positions

Mini B Plug with Contact Insert 5 Positions

Top and Front Shield

0-1734205-1

1-1734205-1

3-1734205-1

4-1734205-1

1000 per Bag

5

Black

Not applicable

Bottom Shield

USB 2.0 Type A to Mini B Cable Assemblies

Package

Quantity

(Pieces)

No. of

Conductors

Length

(mm)

Part

Number

Plug 1

Plug 2

Color

Description

Standard USB-A to Mini-B Assembly, 1.0 M

Standard USB-A to Mini-B Assembly, 1.5 M

Standard USB-A to Mini-B Assembly, 2.0 M

Standard USB-A to Mini-B Assembly, 3.0 M

Standard USB-A to Mini-B Assembly, 5.0 M

Standard USB-A to Mini-B Assembly, 12″

Standard USB-A to Mini-B Assembly, 8″

C2113A USB Cable

1000

1500

2000

3000

5000

305

1496476-1

1496476-2

1496476-3

1496476-4

1496476-5

1496476-6

1496476-8

1750516-1

275 per Box

220 per Box

150 per Box

110 per Box

60 per Box

200 per Box

10 per Box

200 per Box

4

USB Type A

Mini B

Black

203

800

18

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Mini USB Receptacle

Features

Tyco Electronics offers a

complete range of (Mini) USB

receptacles, cables and plugs.

The system is fully compliant

with the USB specification and

supports data transmission

speeds >USB 2.0 full speed.

Material and Finish

Housing:

High temperature thermoplastic,

UL 94 V-0, black color

Contact:

Phosphor bronze, selectively plated

gold over nickel and tin-lead in

solder area

Shell:

Phosphor bronze, half bright tin

over copper underplating

Documentation

Drawing:

C-See table

Product Specification:

108-57062

Mini USB Receptacles, Type B

Test Report:

501-57070

Package

Quantity

(Pieces)

No. of

Contacts

Locating

Post

P & P

Tape

Part

Number

Color

Description

4

Black

Mini USB, Receptacle

Y

N

Y

1-1775055-1

1-1734035-1

1-1734035-3

1-1734035-4

1-1734035-1

1-1734035-3

700 per Reel

150 per Tray

700 per Reel

150 per Tray

700 per Reel

5

Black

Mini USB, Right-Angle, SMT, pbFree

N

All specifications subject to change. Consult Tyco Electronics for latest specifications.

19

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Micro USB Connector

Features and Advantages

The brand new Micro USB con-

nector further decreases the size

needed for the popular USB con-

nector system, while maintaining

performance on the same level.

It is specifically developped for

mobile phone applications where

size is a major issue.

• Low profile connector system;

Height = 2.7 mm

(2.7 x 5.0 x 7.5 mm)

• Robust design

• 10,000 cxycles durability

• Latching design provides strong

mating

Material and Finish

Insulator:

Thermoplastic resin

Contact Pin:

Copper alloy

Contact Plating:

Selectively gold plated over

Ni-Pd over nickel

Shell:

Stainless steel, tin over nickel plated

Package

Quantity

(Pieces)

No. of

Conductors

Part

Number

Type

Color

Description

Documentation

Drawing:

C-See table

Product Specification:

108-78434

Test Report:

See Product Specification

Gray

Black

White

Black

Receptacle AB

Receptacle B

Plug A Type

Plug B Type

1981584-1

1981568-1

1939053-1

1939054-1

1000

Receptacle

Plug

5

20

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Generic Snake and Pad Connector

Generic Snake and

Pad Connector

Features

The Snake and Pad contact system

is a spring loaded approach to

the I/O connector. Inherently the

system is very forgiving of large

mating tolerances and boasts a

low total application cost. Using

this proven contact system Tyco

Electronics has 12 and 16 pos.

standard connectors available.

The connector system uses

solderless compression in-phone

“pad” and cradle cable plug

“snake” contacts. The plug con-

sists of full load cradle and cable

connectors as well as charging

plugs. The connector system can

be keyed for individual customer

applications. Tyco Electronics

Snake and Pad connectors are

highly reliable cellular intercon-

nect solutions, used in millions

of handsets.

29.9

25.7

∅ 3.7

2.75

8.75

8.4

6.0

Material and Finish

Insulator:

35.4

LCP, glass-filled, black color

0.7 typ.

Contact Pin:

Phosphor bronze

2.4

Contact Plating:

5.0

Selectively plated gold over

nickel at contact position,

tin over nickel at solder area

1.1 typ.

26.8

Locking Springs:

POM, black color

Documentation

Drawing:

C-See table

5.3

Product Specification:

108-19184

4.35

Test Report:

501-19044

3.3

5.2

1.65 max.

14.2

Application Specification:

114-19060

Mates with

5338980

2 Pos.

5338979

12 Pos.

5338982

338966

12 Pos.

338967

16 Pos.

Package

Quantity

Number

(Pieces)

PCB

Thickness

(mm)

Part

No. of

Pos.

16 Pos.

Type

Application

5338980-1

5338979-1

5338979-2

5338982-1

5338982-2

338966-9

2250 per Box

1750 per Box

250 per Box

2

12

16

12

16

Plug

Cable

Desktop Stand

Cable

–

X

–

X

–

X

–

X

–

X

–

Plug

–

Plug

Desktop Stand

Cable

–

Plug

–

Receptacle

N/A

0.9^✱

1.2^✱

1-338967-2-

N/A

^✱) Other PCB thickness can be made available upon request.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

21

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Multi Media Interface Connector

Multi Media Interface

Connector

Features

This small versatile Multi Media

Interface Connector supports

various digital data/audio appli-

cations.

Proprietary metal shell side

lock provides superb EMI per-

formance as well as mechanical

robustness.

Various cable assemblies are

provided to support many mobile

electronics applications.

5.3

2.0

1.5

0.18

1.0

Material and Finish

7.25

4.5

4.0 6.2 9.0

7.5

6.7

Insulator:

Thermoplastic, UL 94 V-0, black color

0.5 typ.

Contact Pin:

0.3

Copper alloy

7.5

Contact Plating:

8.5

1.0 µm min. nickel underlayer,

0.1 µm min. gold at mating side,

0.01–0.2 µm gold at solder tin

3.0

Shell Plating:

0.5 µm min. tin plating

3.95

3.0 2.5

4.0

1.4

0.95

6.2

0.2

Documentation

Drawing:

See table

8.15

7.05

Product Specification:

See table

Test Report:

See table

0.3

0.5 typ.

1.1

6.2 8.0

1.1

1.9

0.5

PCB Layout

(for reference only)

1.3

MMI Connectors

Package

Quantity

(Pieces)

No.

of Pos.

Height

(mm)

Part

Number

Pitch

Type

Style

Description

Comment

Plug

N/A

3.0

3.2

1.4

2.4

N/A

3.0

N/A

3.0

N/A

DIP

SMT

DIP

N/A

SMT

N/A

DIP

Plug Assy for Ear Phone Connector

Receptacle Assemby for Ear Phone

1612633-1

1612634-1

1674432-1

1827349-1

1674787-1

1747124-1

1746223-1

1746717-1

1746716-1

1717169-1

1717312-1

150 per Tray

1500 per Reel

1200 per Reel

1500 per Reel

1200 per Reel

1500 per Reel

110 per Tray

600 per Reel

110 per Tray

600 per Reel

–

Receptacle Assy for Ear Phone Jack Connector

Rec. Assy for Ear Phone Connector onboard reverse

Receptacle Assy for Ear Phone Connector off

Plug Assy for MMIC

10

Reversed

Receptacle

Inboard

0.5

Inboard

Inboard, reversed

Plug

–

12

14

Receptacle

Plug

Receptacle Assy for MMIC

Plug Assy for DC Cable

Receptacle

Emboss Assy for MMIC Receptacle

22

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

MDIC and S-MDIC Connector System, 12 Positions

MDIC and S-MDIC

Connector System,

12 Positions

Features

The MDIC and S-MDIC I/O

connector systems are further

decreasing the size of common

I/O interfaces.

This 12 positions connector

system is highly miniaturized

and features a receptacle height

as small as 2.0 mm.

Small Size (L x W x H):

6.0 x 7.2 x 2.5 mm (S-MDIC)

7.15 x 8.7 x 2.0 mm (MDIC)

Packaged in Tape and Reel

Material and Finish

Receptacle

Plug

Insulator:

Thermoplastic acc. UL 94 V-0

6.5

4.0

1.85

Contacts:

Copper alloy 0.3 µm gold over

1.3 µm nickel in contact area.

Gold-flash in other areas.

0.8 typ.

0.4 typ.

Shell:

SUS nickel plated 2.0 µm min.

6.55

8.5

8.2

7.2

7.5 6.7

0.2

0.12

0.15

10.3

3.5

2.53

1.5

2.0

3.5

3.0

3.15

4.5

0.8

S-MDIC as shown

Pitch

(mm)

Height

(mm)

Description

S-MDIC Receptacle

Part Number

Package Quantity

0.4

0.5

2.5

N/A

2.0

N/A

368560-1

368565-1

368555-1

1827541-1

1827546-1

1000 per Reel

1750 per Tray

1000 per Reel

1110 per Tray

S-MDIC Receptacle, Reversed

S-MDIC Plug

MDIC Receptacle

MDIC Plug

23

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

HDMI Connectors, Type C

Features

New reduced form factor

connector for small portable

devices such as camcorders,

still cameras and mobile

phones.

Compliant with HDMI version

1.3 specification.

These HDMI connectors are on

the approved connector list.

Material and Finish

Insulator:

Thermoplastic acc. UL 94 V-0,

color black

Contact:

Copper alloy

11.2

8.5

7.4

0.35

Shell:

Copper alloy

Pick and Place Feature:

Polyamide tape

3.45

2.1

1.0

10.85

2.3

30.0

14.0

6.5

2.42

9.0

8.4

10.4

10.85

0.375 typ.

1.0 typ.

0.8 typ.

4.7

1.1 typ.

0.2 typ.

0.4 typ.

PCB Layout

7.2

24

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Memory Card Connectors

Features

Tyco Electronics offers a wide

range of memory card connectors

in several variations.

Material and Finish:

See drawing

Documentation

Drawing:

See table

Product Specification:

See table

Package

Quantity

(Pieces)

Card

Detection

Switch

Write

Protect

Switch

Height

Location Pin

(mm)

Ejection

Type

Product

Specification

Type

SD

Part Number

Standoff

Packaging

0-1470139-1

0-1470139-2

0-1470139-3

0-1734234-1

0-1734234-2

0-1734234-3

0-1734234-4

0-1734472-1

0-1734472-2

0-1734472-3

1-1734472-1^✱

1-1734472-2^✱

1-1734472-3^✱

0-1871250-3

0-1871250-4

0-1871583-1^✱✱

0-1871583-2^✱✱

0-1871583-3

0-1871583-4

0-0440297-1

0-0440297-2

0-0440297-3

0-0440297-4

0-1775059-1

0-1775012-1

0-1775067-1

0-1871916-1

0-1903302-1

0-1674162-1

0-1674319-1

0-1470332-1

0-1717431-1

0-1470864-1

0-1827034-1

0-1775204-1

0-1871602-1

0-1871602-2

0-0338610-1

40 per Tray

32 per Tray

P-P

P-PI

P-P

P-PI

P-P

P-PI

P-P

P-PI

Y

N

Y

N

Y

0

1.2

0

0.70

0.85

0.40

0.70

0.55

0

Long Tray

Short Tray

T&R

108-57127

108-78220

108-57127

108-57504

–

300 per Reel

45 per Tray

Y

Tray

500 per Reel

45 per Tray

Y

T&R

Y

Tray

500 per Reel

40 per Tray

Y

T&R

Y

Long Tray

Short Tray

T&R

32 per Tray

Y

300 per Reel

40 per Tray

Y

Long Tray

Short Tray

T&R

32 per Tray

Y

300 per Reel

220 per Reel

280 per Reel

281 per Reel

282 per Reel

283 per Reel

48 per Tray

Y

T&R

Y

T&R

Y

0.55

0

T&R

Y

T&R

Y

0.55

0

T&R

Y

T&R

Y

0.85

0.45

0.50

0.45

0.80

0

Tray

500 per Reel

48 per Tray

Y

T&R

Y

Tray

500 per Reel

250 per Reel

200 per Reel

180 per Reel

45 per Tray

Y

T&R

SD Reverse

Y

T&R

Y

T&R

Y

T&R

Y

T&R

Y

T&R

–

Memory Stick

N

Tray

108-57340

108-57238

108-57340

108-57432

108-78224

108-57589

108-78337

108-19173

54 per Tray

N

Tray

72 per Tray

N

0.60

0

Tray

54 per Tray

N

Tray

XD

50 per Tray

N

0.45

0

Tray

T-Flash

Mini SD

Micro SD

1100 per Reel

750 per Reel

1000 per Reel

1350 per Reel

N/A

T&R

0.5

T&R

0

T&R

0.45

0

T&R

MMC

T&R

^✱) Full cover

^✱✱) Reversed reflow possible

All specifications subject to change. Consult Tyco Electronics for latest specifications.

25

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Micro SD Connector

Features

The Micro SD socket has an easy-

to-use push-push connection. It

is equipped with a mechanism we

created in-house that maintains

sufficient card ejection stroke

while preventing the card from

popping out. Also, it provides

high reliability in a compact low

profile shape with a durable card

detection switch built-in and it

holds contact securely. The Micro

SD/SD adapter achieves long-

lasting high operability by using

an internal construction that

prevents flexing and other

stresses on the case from being

conveyed to contacts.

Micro SD Socket

• Excellent insertion click

• Rugged connectivity maintains

connections

• Supports embossed packaging

Micro SD/SD Adapter

14.6

1.73

• Hook spring mechanism makes

clear click connection

• Comes with socket

• Any label design modification

is possible

• Equipped with write protect key

14.3

15.3

16.0

Material and Finish

Insulator:

Thermoplastic, black color

Contact:

Copper alloy, gold over nickel plated

Shell:

Copper alloy, gold over nickel plated

Coil:

SWP

1.7

2.5

1.35

Cam Rod:

SUS

Hook Spring:

SUS

Part No. 1871602-1 without Locating Pin

Part No. 1871602-2 with Locating Pin

Documentation

Drawing:

C-1871602

Product Specification:

108-78337

Test Report:

501-5756

26

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Micro SD/SIM Combi Connector

Micro SD/SIM Combi

Connector

Features

This connector combines a

Micro SD memory slot with a

SIM card connector on top of it.

Besides of the enormous space

savings this brings, the connector

also includes features like shield-

ing test points and of course

push-push ejection system and

a card detection switch.

Material and Finish

SIM Contact:

Copper alloy, plated gold over nickel

Insulator:

Thermoplastic, black color

Micro SD Contact:

Copper alloy, plated gold over nickel

Switch Contacts:

Copper alloy plated gold over nickel

Cam Slider:

Thermoplastic, black color

17.3

8.0

Cam Hook Spring:

Stainless steel

3.0

Camrod:

Stainless steel

Coil Spring:

Piano wire nickel plated

1.1 typ.

Bottom Shell:

Copper alloy, nickel plated

14.28

17.6

Top Shell:

19.7

Copper alloy, gold over nickel plated

11.0

Documentation

Drawing:

0.4

3.4

1.45

1.8

C-368637

Product Specification:

108-61079

18.85

0.65

1.1

1.3

0.6

1.5

Test Report:

501-61050

0.95

16.3

1.27

1.9

2.8

PCB Layout

Part No. 368637-3

Package Quantity:

600 Pieces per Reel

All specifications subject to change. Consult Tyco Electronics for latest specifications.

27

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Micro SD Adapter

Features

This adapter allows the Micro SD

card to be read in a normal

SD card slot. The adapter is

equipped with a spring which

provides required retention force

for the Micro SD card.

Custom labeling can be provided

on demand.

Material and Finish

Insulators:

Thermoplastic

Contacts:

Copper alloy selective gold plated

Spring:

Stainless steel

Label:

PET

Documentation

Drawing:

C-1903290

Description

Part Number

Package Quantity

Micro SD Adapter with Soft Case

1903290-1

60 Tray

Product Specification:

108-78355

28

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Spring Probe Connector (SPC), 1 Position

Spring Probe Connector

(SPC), 1 Position

Features

Spring Probe Connectors require

very small space on printed circuit

board.

Spring Probe Connectors can be

used for battery connections as

well as antenna, shielding and

many other applications.

A wide variety of pin count,

size, and soldering interfaces are

available.

Please contact your sales for

more details.

Material and Finish

Plunger:

Brass

Body:

Brass

Spring:

Piano wire

Contact Plating:

Nickel underlayer,

0.1 µm min. gold plating

Height / Length (mm)

Force (N)

Max.

Compression

Height

Min.

Compression

Height

Un-

compressed

Height

Body

Height

Working

Height

Min.

Force

Nominal

Force

Max.

Force

Min.

Diameter

Max.

Diameter

6.26

3.10

6.10

5.13

5.00

7.60

7.30

4.90

7.35

6.26

3.20

6.20

5.68

5.10

7.75

7.40

–

6.76

3.60

6.60

6.08

5.45

8.15

7.80

5.47

8.40

7.26

4.00

7.10

6.70

6.00

8.65

8.30

–

7.76

4.20

7.60

6.88

6.50

9.15

8.80

6.10

9.40

0.3

0.5

0.3

N/A

0.6

0.8 +/- 0.2

0.8 +.6 -0.2

0.9 +/-0.3

N/A

2

–

1.5

1.9

–

1.5

1.8

1.3

–

1.5

2.3

0.9 +/- 0.3

0.9 +/- 0.4

1

1.5

1.8

–

1.5

1.8

–

1.5

1.8

–

001.175

1.5

001.175

02.65

7.90

8.90

N/A

1.8

All specifications subject to change. Consult Tyco Electronics for latest specifications.

29

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Spring Fingers

Features

Spring Fingers provides highly

reliable connection in many

applications such as shielding,

cconnection to vibration motors,

antennas, speakers and micro-

phones.

Our large portfolio contains

products with several mating

heights and plating variants.

Material and Finish

Contact Pin:

Copper alloy

Contact Plating:

See table

Documentation:

Drawing:

See table

Product Specification:

See table

Test Report:

See table

Package

Quantity

(Pieces)

Uncompressed

Height

Effective

Height

(mm)

Plating

Solder

Area

Plating

Contact

Area

Part

Number

Width

(mm)

Base

Material

Product

Specification

Test

Report

Description

(mm)

820

0-1447009-5

0-1483748-1

0-1447009-6

1-1447360-1

0-1565158-1

0-1746136-1

0-1565322-1

0-1447360-9

0-1857724-4

0- 440432-1

0-1734300-1

0-1447009-8

0-1437259-6

0-1720028-2

0- 440423-1

0- 440430-1

5000 per Reel

2500 per Reel

2000 per Reel

1500 per Reel

1200 per Reel

2.0

1.5

1.2

1.0

1.1

2.0

0.8

1.5

0.95

2.5

0.8

1.3

1.4

1.5

1.6

1.7

1.8

3.0

3.5

4.0

5.0

6.5

0.3–0.5

0.6–0.3

0.7–1.0

1.05–1.30

0.95–1.30

0.6–1.0

1.1–1.4

0.9–1.3

1.5–1.0

1.0–2.5

0.8–3.0

2.0–3.0

2.0–3.5

0.8–3.2

2.0–4.0

4.0–6.5

Cu Alloy

BeCu

Au

Sn

Au

Ni

Au

Ni

108-78123

–

501-78113

915

–

1312

108-78135

108-78174

108-57850

–

501-78123

1410

501-78159

1511

–

1520

–

1608

Cu Alloy

Stainless Steel

Cu Alloy

108-57860

108-78143

–

1715

–

1895

–

3025 Z1-T

3025-Z1T2

3525A

4025

108-57169

108-57507

108-78162

108-78156

108-57507

–

501-57159

501-57581

501-78162

501-78141

501-57581

–

404025C-T

5025T

6525

Sn

Au

Sn

Au

108-57130

501-57110

30

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

LCD ITO Connector, 8 Positions

LCD ITO Connector,

8 Positions

Features

8 positions ITO connector for

chip on glass technology. The

connector is being glued to the

LCD, using an anisotropic con-

ductive film. The compressive

part of the connector is used for

contacting the PCB.

Material and Finish

Insulator:

Thermoplastic resin, black color

Contact Pin:

Copper alloy

Contact Plating:

0.25 µm gold min. over

1.3 µm nickel in contact zones.

Documentation

Drawing:

C-338970

8.05

Product Specification:

108-19189

0.4

1.15 typ.

Test Report:

501-19047

Application Specification:

114-19061

3.2

1.8

0.6

3.5

4.5

16.0

Part No. 338970-1

Package Quantity:

1300 Pieces per Reel

All specifications subject to change. Consult Tyco Electronics for latest specifications.

31

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

LCD Connector 0.65 mm, 10 Positions

LCD Connector 0.65 mm,

10 Positions

Features

The connector is SMD soldered

to the main board and provides a

stable and reliable connection by

compressive contacts with the

LCD module.

Material and Finish

Insulator:

Glass-reinforced LCP, black color

Contact Pin:

BeCu Copper alloy

Bracket:

BeCu Copper alloy

Contact Plating:

0.5 µm gold min. over 1.3 µm nickel

in contact zone. Other area’s flash

gold over 1.3 µm nickel.

17.15

2.1

Documentation

Drawing:

C-1705536

5.35

6.8

Product Specification:

108-19269

1.5 typ.

13.5

5.18

Part No. 1705536-2

0.62

2.15

Package Quantity:

1900 Pieces per Reel

1.1

17.4

9 x 1.5 = 13.5

1.5

1.2

0.8

4.85

7.17

1.64

1.4

0.78

0.9

16.7

PCB Layout

32

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Standard Switching Coax

Features

These switching coax connectors

are used for testing and setting

the power of the phone on the

production lines but also to make

external switched connection in

a car kit application to use an

external antenna.

The deep drawn outer shell

allows a misalignment tolerance

capture up to 1.0 mm in all

direction.

This system allows up to 20.000

mating/switching cycles.

3 different height available:

6.0 mm, 4.5 mm and 3.5 mm

(only 0.5 mm tolerance capture).

Coplanarity: 0.1 mm

2.7

Material and Finish

Dielectric:

PEEK, natural color

3.1

2.4

0.8

3.1

2.7

Outer Shell:

Steel gold plated

Switch Contacts:

Stainless steel, selective plated

Center Pin:

Brass, gold plated

3.8

4.3

3.2

3.7

0.9

8.0

2.4

∅ 5.4

∅ 3.4

Documentation

Drawing:

C-619061, C-61062 and 619072

∅ 0.6

Product Specification:

108-71000

3.7

3.0

4.0

Test Report:

501-19028

4.6

Dim. A

2.5

1.7

Recommended PCB Layout

0.1

Dimension A

(mm)

Part

Number

Package Quantity

(Pieces)

6.0

4.5

3.5

619061-1

619062-1

619072-1

1200 per Reel

1600 per Reel

All specifications subject to change. Consult Tyco Electronics for latest specifications.

33

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Standard Switching Coax Test Adapters

Standard Switching Coax

Test Adapters

Features

Test adapters are used in Test

Jigs on mobile phone production

lines to connect smoothly to the

PCB Jack switch.

This system allows a minimum

of 100,000 cycles mating cycles.

Applicable up to 3 GHz.

Material and Finish

Dielectric:

PTFE

Outer Shell:

CuBe or similar, gold plated

Center Contact:

CuBe or similar, gold plated

35.0

22.0

13.0

Documentation

Drawing:

7.0

2.5

C-619052, C-619068

6.62

Product Specification:

108-71000

∅ 3.4

∅ 6.5

Test Report:

∅ 10.0

501-19028

5.47

1/4″–36 UNS-2A

Part No. 619052-1

35.0

22.0

13.0

2.5

7.0

6.62

∅ 3.4

∅ 6.5

∅ 10.0

∅ 8.18

5.47

1/4″–36 UNS-2A

Part No. 619052-1

34

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Standard Switching Coax Right-Angle Cable Plug

Standard Switching Coax

Right-Angle Cable Plug

Features

Right-Angle cable plugs are used

mainly for car kit application

but can also be used in test jigs

instead of test adapters.

The integrated floating system

allows smooth connection, able

to capture tolerances up to

1.0 mm misalignment between

phone and car kit with any risk

of damaging the mobile phone.

A minimum of 20,000 mating

cycles can be done with this

system.

Various form and length can be

offered.

Cable to be used: RG 174, RG 316.

20.3

14.9

3.4

Material and Finish

11.0

Dielectric:

PEEK

Outer Shell:

CuBe or similar, gold plated

3.4

∅ 3.3

Center Contact:

CuBe or similar, gold plated

3.1

Documentation

Drawing:

C-619078, C-619028

Part No. 5-619078-2

Package Quantity: 500 Pieces

Product Specification:

108-71000

Test Report:

501-19028

15.6

12.1

10.92

6.62

1.65

∅ 9.6

∅ 3.4

∅ 3.7

∅ 3.9

5.47

Part No. 5-619028-2

Package Quantity: 500 Pieces

For further models, please contact Tyco Electronics

All specifications subject to change. Consult Tyco Electronics for latest specifications.

35

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Standard Switching Coax with ESD Proctection

Standard Switching Coax

with ESD Proctection

Features

These switching coax connectors

are used for testing and setting

the power of the phone on the

production lines but also to make

external switched connection in

a car kit application to use an

external antenna.

This 3 connector types offer in

addition an ESD protection which

means that as long as the PCB

connector is not connected to a

test connector or a cable connec-

tor, the center contact actuating

the switch is grounded. The

outer shell allows also a mis-

alignment tolerance capture up

to 1.0 mm in all direction.

This system allows up to 20.000

mating/switching cycles.

Two version available:

Recommended PCB Layout

Height of 6.3 mm and 4.1 mm

1.75

0.8

Coplanarity: 0.1 mm

1.75

Material and Finish

0.8

Dielectric:

PEEK, natural color

Outer Shell:

Steel gold plated

0.65

1.35

Switch Contacts:

Stainless steel, selective plated

Center Pin:

Brass, gold plated

∅ 3.4

∅ 5.0

∅ 0.56

0.97

Documentation

Drawing:

C-619201 and 619231

4.0

3.8

Product Specification:

108-71053 and 108-71063

1.8

Height

(mm)

Diameter

(mm)

Part

Number

Package Quantity

(Pieces)

Comment

619201-1

619231-1

1600 per Reel

–

4.1

5.0

In/Out 180° rotated

Test Adapters and Cable Plugs to be used for all Standard switching Coax with ESD protection:

Same as for Standard Switching Coax.

36

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

MID Micro Switching Coax

Features

This very small switching coax

connector is used for testing and

setting the power of the phone

on the Mobile Phone production

lines.

Applicable up to 6 GHz.

This connector using MID tech-

nology has only two components

and allows a coplanarity value of

max 0.08 mm.

PCB surf. need: 3.0 x 3.0 mm

Height: 2.5 mm

Two types of mating connector

offered:

• Press-on for test jigs

• Snap-on for hand testing

1.3

∅ 3.0

3.0

Material and Finish

3.2

Dielectric / Outer Shell /

Second Signal Contact:

Two shot molded LCP selectively

gold plated

1.12

0.46

0.66

0.92

Switch Contacts:

Stainless steel, gold plated

0.66

1.7

3.4

1.54

Documentation

2.5

Drawing:

C-619196, C-619210, C-619211

0.8 (4x)

Product Specification:

108-71062

Recommended PCB Layout

3.0

SMD Switch: Part No. 619196-1

Package Quantity: 1,000 Pieces per Reel

Right-Angle Cable Plug with Snap Fingers:

Part No. 5-619211-1

Test Adapter: Part No. 619210-1

Package Quantity: 50 Pieces per Box

All specifications subject to change. Consult Tyco Electronics for latest specifications.

37

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

MID Nano Switching Coax

Features

This very small switching coax

connector is used for testing and

setting the power of the phone

on the Mobile Phone production

lines.

Applicable up to 6 GHz.

This connector using MID tech

nology has only two components.

By having the switch contact

mounted inside the connector,

only the MID outer shell is touch-

ing the PCB. This allows remark-

able coplanarity value of max.

0.06 mm.

PCB surf. need: 2.7 x 2.7 mm

Height: 1.7 mm

Two types of mating connector

offered:

• Press-on for test jigs

• Snap-on for hand testing

Material and Finish

Dielectric / Outer Shell /

Second Signal Contact:

2.7

Two shot molded LCP selectively

gold plated

Switch Contact:

Stainless steel, gold plated

Recommended PCB Layout

∅ 0.55

2.7

2.9

Documentation

1.55

0.4

Drawing:

C-619213, C-619214, C-619217

Product Specification:

108-71065

1.0

0.93

2.95

2.0

∅ 1.9

1.15

0.65

1.7

0.4

0.55

SMD Switch: Part No. 619213-1

Package Quantity: 8,000 Pieces per Reel

Snap-On Test Adapter: Part No. 619217-1

• Spring loaded center contact

Test Adapter: Part No. 619214-1

• Spring loaded outer conductor

• Spring loaded center contact

38

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Spring Probe Connector (SPC)

Spring Probe Connector

(SPC)

Features

Spring Probe Connectors are

widely used in the electronics

industry. In mobile equipment

they can be used in several

applications such as antenna,

charging/power, shielding and

many other applications.

Their proven design provides

several advantages:

• Relatively large stroke

• Small Printed Circuit Board

usage

• Spring action in only one direc-

tion (direction of movement)

The Tyco Electronics spring probe

connector portfolio contains a

vast variety of products with

several heights, strokes, building

styles (verticall or right-angle),

pin counts and pitches.

Package

Quantity

(Pieces)

Contact

Height

(Free)

No. of

Positions

Part

Number

Pitch

Stroke

Mating Type

Battery Mating

1746730-1

1746750-1

1279154-1

0900971-1

1612681-1

0900905-1

1746931-1

0900795-1

0900965-1

0900712-1

1705254-1

1612493-1

1746751-1

1717400-1

1746116-1

1747103-1

1717017-1

1717257-1

1717029-1

1717294-1

1705130-1

1705030-1

1705795-1

0900688-1

0900988-1

1674783-1

1483960-1

1377269-2

1674977-2

1483940-1

1674977-1

1717989-1

1746773-1

1000 per Reel

1500 per Reel

1000 per Reel

2060 per Reel

1000 per Reel

1500 per Reel

1000 per Reel

1500 per Reel

1250 per Reel

1000 per Reel

1500 per Reel

1400 per Reel

1000 per Reel

3.00

3.60

4.00

3.60

3.00

4.00

3.60

3.00

3.10

3.00

4.00

4.60

3.45

3.85

3.50

2.60

2.50

2.54

4.00

2.54

2.90

2.54

2.90

3.70

3.50

3.30

3.70

4.45

5.00

5.10

5.70

6.40

6.90

2.80

3.95

5.50

6.30

6.35

4.15

4.60

3.95

4.43

4.75

5.00

3.60

5.60

5.50

5.70

4.10

5.00

5.15

5.20

6.65

2.90

3.65

0.90

1.20

1.40

0.90

1.50

1.40

1.50

2.30

1.40

1.50

1.40

1.25

1.70

1.65

1.40

1.70

1.60

1.50

1.00

1.50

1.40

1.50

1.00

1.50

1.25

1.40

1.25

1.65

1.70

Vertical (180°)

Rotating (hinged)

Material and Finish

Insulator:

Thermoplastic, black color

2

Probe Pin:

Brass

Body:

Brass

Right-Angle (90°)

Vertical (180°)

Right-Angle (90°)

Vertical (180°)

Right-Angle (90°)

Sliding & hinged

Rotating (hinged)

Sliding & hinged

Rotating (hinged)

Sliding & hinged

Contact Plating:

Nickel underlayer, 0.1 µm min.

gold plating

3

Documentation

Drawing:

See table

Product Specification:

See drawing

4

5

All specifications subject to change. Consult Tyco Electronics for latest specifications.

39

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Generic Battery Connector, 2 Positions

Generic Battery Connector,

2 Positions

Features

Our Generic 2 positions SMT

Battery Connector has an industry

proven contact design that can

be used in a wide variety of appli-

cations. Two contacts can be

used for one pad for redundancy

reasons.

Its small size and low cost make

this connector ideal for low to

medium volume requirements.

This connector is also “in-line”

stackable for multi position

requirements.

6.2

1.0

Material and Finish

Insulator:

LCP, glass-filled, black color

1.85

7.0

4.25

Contact Pin:

Phosphor bronze

Contact Plating:

Selectively plated gold over nickel

and tin on solder beam

0.7

4.1

2.0

Part No. 6337194-1

Documentation

Package Quantity:

550 Pieces per Reel

Drawing:

C-6337194

4.8

Product Specification:

108-3419

1.5

Test Report:

GB 39-99

0.4

0.85

Application Specification:

114-3211

7.0

4.25

1.0

Recommended

PCB Layout

1.8

3.4

6.8

1.05

2.05

0.6

2.2

2.8

7.05

40

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

1.6 mm Pitch Low Profile Battery Connector

1.6 mm Pitch Low Profile

Battery Connector

Features

Because of their low cost, relia-

bility and high current capacity,

Leafspring connectors are

ultimately suitable for battery

connections. This connector

series features a low housing

height of 2.1 mm min.

The product can be used with

hinged or slided batteries and

can carry up to 2 A at 250 V AC.

Material and Finish

Insulator:

Thermoplastic, black color,

LCP or equivalent UL 94 V-0

4.8

1.6 typ.

0.6

Contact Pin:

Copper alloy

1.25

Contact Plating:

0.38 µm gold plating on contact

area, gold-flash on solder area over

1.27 µm nickel

2.5

0.15

Documentation

Drawing:

C-See table

1.0

7.0

0.1

Product Specification:

108-60035

Test Report:

1.2

501-5629

1.2

4.33

0.8

1.0

Recommended

PCB Layout

1.25

1.6

Housing

Height

(mm)

Total Height

Uncompressed

(mm)

Package

Quantity

(Pieces)

No. of

Positions

Pitch

(mm)

Part Number

4

2

3

5

3

1.6

3.0

2.5

2.1

3.75

3.65

292331-1

292331-2

292331-3

292331-5

292448-1

1500 per Reel

Bold Part Numbers have been tooled.

41

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Right-Angle Leaf Spring Battery Connector

Right-Angle Leaf Spring

Battery Connector

Features

Right-Angle Leaf Spring Battery

Connector provides reliable

battery interconnection for mobile

handset application.

Typical part numbers are shown

below.

For the custom sizes, please

contact Tyco Electronics sales.

Material and Finish

Insulator:

6T PA, UL 94 V-0, black color

12.0

10.9

Contact Pin and Solder Pegs:

Copper alloy

0.7

1.2

Contact Plating:

1.27 µm min. nickel underlayer,

1.0 µm min. gold at contact side

0.05–0.13 µm gold at solder side

11.0

7.5

2.2

Solder Peg Plating:

1.0 µm min. nickel underlayer,

1.0 µm min. tin plating

9.6 Ref.

∅ 1.2

2.0

7.4

2.2

1.0

3.2

3.0

10.5

Documentation

7.9

Drawing:

See table

5.0

Product Specification:

See drawing

1.72

1.5

2.4

1.8

3.0

6.3

6.9

Recommended PCB Layout

3.9

1.9

1.8

Package

Quantity

(Pieces)

Contact

Height

(mm)

Total

Height

(mm)

Mount Size

Width x Depth

(mm)

No. of

Positions

Part

Number

Pitch

Finish

1717273-1

1717406-1

1717413-1

1717562-1

1717838-1

1746142-1

1747129-1

1827000-1

1827928-1

1871813-1

500 per Reel

40 per Tray

3.0

6.5

3.2

3.0

6.5

3.0

2.7

3.9

5.0

6.3

7.7

10.5 x 8.6

10.5 x 7.4

20.0 x 5.0

12.4 x 3.7

10.3 x 4.9

19.9 x 2.6

11.2 x 2.5

10.3 x 4.7

Ni + Au

4.5

6.9

Ni + NiPd + Au

Ni + Au

4.5

6.9

6.6

11.50

6.5

3

500 per Reel

40 per Tray

3.5

Ni + Au

4.4

6.7

Ni + NiPd + Au

Ni + Au

10.40

05.75

3.9

17.10

7.6

400 per Reel

500 per Reel

Ni + Au

6.0

Ni + NiPd + Au

42

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Battery Block

Features

This battery concept allows for a

stable battery connection in any

circumstances. The plug side,

which is mounted in the equip-

ment, connects to the special

connector in the battery.

The battery side connector is

equipped with two contact points

per contact. The U-shaped

contact always keeps the forces

in the connector. The special

construction of the connector

allows for hinged or sliding

mating of the battery pack.

The small size of the complete

system makes it ultimately suit-

able for mobile applications.

0.7

6.6

Receptacle: Part No. 1612901-1

1.2

Package Quantity:

1700 Pieces per Reel

3.0

4.0

Material and Finish

Insulator:

Thermoplastic, UL 94 V-0, black color

2.0

0.7

7.4

PCB Layout

Contact Pin:

Copper alloy

2.0

3.0

Contact Plating:

Selectively plated gold over nickel

and gold-flash in solder area

2.75

2.6

∅ 0.75

0.55

1.5

1.55

0.6

Documentation

0.5

Drawing:

C-Part No.

6.5

5.5

Product Specification:

108-5846

Test Report:

501-5452

Plug: Part No. 1612898-1

Package Quantity:

75 Pieces per Tube

4.8

3.4 4.4

Plug:

Part No. 1612898-1

2.0

4.9

2.0

Receptacle:

Part No. 1612901-1

2.0

2.2

∅ 0.75

∅ 1.4

∅ 0.8

5.4

1.8

3.8

5.3

2.6

1.6

0.9

1.8

5.9

0.5

PCB Layout

All specifications subject to change. Consult Tyco Electronics for latest specifications.

43

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Inboard SMIA 85 Camera Socket

Inboard SMIA 85

Camera Socket

Features

Inboard SMIA 85 Camera socket

according to the SMIA standard.

For camera modules with 8.5 x

8.5 mm footprint.

• Fully-shielded camera socket

• Inboard allows for “flat” phone

design

• Grounding fingers to camera

module

• Keying feature and optical

identification feature

• Large pick and place possibility

inside

• Grounding clips

Material and Finish

Insulator:

LCP, black color

Contact Pin:

Phosphor bronze

Part No. 1857258-1

Package Quantity:

800 Pieces per Reel

Contact Plating:

Selectively plated gold over nickel

Shields:

Phosphor bronze

Top Shield Plating:

11.2 13.8

Selective gold over nickel

Bottom Shield:

Tin over nickel

0.9

0.8

0.95

Documentation

0.25

1.1

Drawing:

C-1857258

10.2

13.1

8.3

14.1

11.8

Product Specification:

108-19297

10.8

Application Specification:

114-19101

3.05

0.5

5.45

10.3

13.3

PCB Layout

44

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Onboard SMIA 85 Camera Socket

Onboard SMIA 85

Camera Socket

Features

Onboard SMIA 85 Camera socket

according to the SMIA standard.

For camera modules with 8.5 x

8.5 mm footprint.

• 4x camera module locking clips

• Grounding to the camera by clips

• Overmolded contacts

• Keying and optical identification

feature

Material and Finish

Insulator:

PA, black color

Contact Pin:

Phosphor bronze

Contact Plating:

Selectively plated gold over nickel

Shields:

Copper alloy

Shield Plating:

Part No. 1857346-1

Selective gold over nickel

Package Quantity:

1000 Pieces per Reel

Documentation

Drawing:

10.3 10.55

C-1857346

Product Specification:

108-19297

Application Specification:

114-19101

10.0

9.4

10.6

1.6

9.5

5.03

0.4

10.3

PCB Layout

All specifications subject to change. Consult Tyco Electronics for latest specifications.

45

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Super Low Profile (SLP) Connector

Super Low Profile (SLP)

Connector

Features

This super low profile cable-to-

board connector requires very

little space for high density and

small size mobile electronics.

For your one stop shoping,

various cable assemblies are

provided to best suit your appli-

cation.

Applicable Cable

Wire Size: AWG 32

Diameter: 0.39 mm

Material and Finish

Insulator:

Thermoplastic,

5.7

3.3

PCB Layout

Black (Board Connector),

Beige (Receptacle Connector)

Contact Pin:

Copper alloy

1.6

3.58

3.9

Contact Plating:

Board Connector:

1.3 µm min. nickel underlayer,

0.3 µm min. gold at mating side

0.05–0.20 µm gold at solder side

5.3

Receptacle Connector:

Gold plating

1.6

0.8

Board

Connector

Shields:

Copper alloy

1.4

1.7

Shield Plating:

Selective gold over nickel

3.2

2.3

1.5

0.3

Documentation

Drawing:

See table

Product Specification:

108-5822

Test Report:

501-5593

2.05

3.55

Application Specification:

114-5357

0.8

Cable Assembly (Example)

Plug: Part No. 1612537-1

Receptacle: Part No. 1612534-1

1.33

1.1

46

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Micro SLP Connector

Features

This connector is applied for

interconnection to speakers,

receivers or other small devices

in Mobile equipment.

• Low Profile,

Mating Height = 1.4 mm

• Contact Pitch = 0.8 mm

• Applied Wire Size: AWG 32

• Double slot mass termination

• Double latch concept, contact

and housing

• Special latch design ensures

good tactile feedback

• Size (H x W x L):

1.4 x 2.85 x 4.66 mm

• Design ensures contact

protection during mating

Material and Finish

Insulator:

Thermoplastic resin

Contact Pin:

Phosphor bronze

2.65

Contact Plating:

0.3 µm gold over 1.3 µm nickel in

contact area, gold-flash plating in

solder area

4.4

Shields:

Copper alloy

2.85

1.0

1.1 2.85

Shield Plating:

Selective gold over nickel

4.3

0.8

Documentation

Drawing:

C-See table

0.7

1.1

1.4

Product Specification:

108-78466

1.5

2.95

4.7

Test Report:

See Product Specification

PCB Layout

Application Specification:

114-5426

Cable Assembly

Plug: Part No. x-1981812-x

Receptacle: Part No. 1981813-1

Package Quantity:

4000 Pieces per Reel

All specifications subject to change. Consult Tyco Electronics for latest specifications.

47

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

STAX™ LD Elastomeric Connectors

Product Facts

STAX™ LD Elastomeric Connectors

Surface-to-Surface Compression Connection for Board Stacking Applications

■ Single piece compression

connector

■ Contact pitch as lows as

0.8 mm

■ No. of rows of contacts:

1 through 5 (two rows shown

to the right)

■ No. of Contacts: 1–200

■ Board Separation:

0.5–8.0 mm

■ Shielding Capability

■ Performs in high-speed

applications (3 GHz)

■ Low resistance

■ Current Capability:

1 Amp typical with higher

capability possible with

modification

■ Easily modified standard

designs

■ Facilitates automatic

assembly, rework, and field

upgrades

■ Compatible with tin and

flash gold contact metallurgy

■ Rugged and reliable

Dual-Row STAX Connector connects two rows of contact pads. Retention slot is provided in PCB separator.

Elastomeric connectors are

viable in most applications

where traditional board-board

connectors are used. The

applications may include high

speed, power, digital, ground-

ing/shielded interconnect.

Tyco Electronics maintains

complete control over the

quality and performance of the

product. The STAX product

line is manufactured from basic

raw materials (silver or gold,

and silicone) using a proprie-

tary manufacturing process.

Modifications & Options

How STAX Elastomeric

Connectors Work

The flexible elastomeric

manufacturing process

allows a fast, easy modifi-

cation of the products to

suit the individual needs

of the application. Typically

with an elastomer-only

solution there is no tooling.

There are requirements

for minimum production

volume.

STAX elastomers are zero

insertion force connectors

that do not require soldering.

They provide a compliant

surface-to-surface com-

pression connection when

deflected between opposing

mirror-image pad patterns.

The elastomer is a single piece

compression technology. The

silicone within the connector

provides the normal force

The result is a connector

technology that allows the

freedom of design without the

(spring). The conductive layers traditional limitations of stand-

(blend of silicone and silver

particles) make redundant

electrical contact to the pads

on the board.

ard product availability. There

is no need to compromise

the end product at the design

stage.

The STAX LD technology is

based upon 30 years of

experience in manufacturing

Mechanically, the elastomeric

capabilities are flexible. The

technology can meet PCB

and in the hundreds of millions area requirements in appli-

of connectors used in trouble- cations of board separations

free applications. This is a low

durometer and low contact

resistance product.

under 8.0 mm. Electrically,

resistance and current ratings

are competitive with most

alternative technologies.

48

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

STAX™ LD Elastomeric Connectors (continued)

STAX elastomers are com-

posed of alternating layers of

conductive and non-conduc-

tive silicone rubber. Silicone

rubber is the base material

because it has excellent aging

properties, chemical stability,

electrical reliability, and super-

ior performance in shock and

vibration. It also provides a

gasket-like seal to protect the

contact surfaces.

your application? Smaller

1. Determine if an

application engineers are

avail-able to assist in:

• Defining customer furnish-

ed housing requirements.

height, higher I/O, greater cur-

rent capacity, lower resistance,

less PCB area are all modifi-

cations that can be made.

Elastomeric Connector

is appropriate for the

Application

• Providing design input for:

a) Board-Board separation

>8.0 mm?

■

•

Alignment

Deflection

Pad layout

Final elastomer dimen-

sions

3 – Fast

■

The flexible elastomeric manu-

facturing process allows quick

turn on prototypes (1 week)

to test solutions and rapid

ramp on production. Proto-

types are made with the same

process as production.

An elastomer cost is tied

closely to material usage

(precious metals). In appli-

cation greater than 8 mm

elastomers lose their price

competitiveness.

3. Can Tyco Electronics

supply a complete

Connector Solution?

The conductive layers consist

of tiny metallic particles

b) X-YAlignment (> 0.25 mm)?

Unlike a mechanical male-

female connector an elas-

tomer cannot perform the

alignment of the system.

The reference drawings

show how pins can provide

satisfactory alignment.

4 – No Tooling

dispersed in silicone rubber.

Within each of the conductive

layers, the metallic particles

create thousands of conduc-

tive paths. Therefore, each

conductive layer provides

multiple points of contact at

the substrate interface. While

the conductive layers ensure

contact between mating pads,

the non-conductive layers

isolate the conductive layers

from each other. The alter-

nating STAX construction,

200 conductive layers per inch

(8 per mm), allows multiple

conductive layers to make

contact to a single contact

pad while the non-conductive

layers electrically isolate

An elastomer-only approach

allows the customer to imple-

ment the housing and align-

ment features within existing

plastic or metal structure.

Modifications of elastomer

length, height, and width do

not require tooling.

Yes. These solutions can

take the form of simple

holders with STAX connec-

tors held in place by:

• Localized interference

• In-molding

• Grafting

Other methods can achieve

the same result.

The holder or frame can be

plastic, silicone rubber, or

metal and typically has low

tooling investment:

5 – Reliability

c) Sliding Contact?

Tyco Electronics elastomeric

products have been tested to

the following:

Silicone by the nature of

the product has a high co-

efficient of friction. Sliding a

contacting surface across

the elastomer will not be

reliable.

Below are examples of

complete connection solutions

in challenging applications.

• MIL STD-1344

• IEC-68-2

• EIA-364

• MIL STD-202

• JIS C 0020

• JEIDA 38

• INTEL SPEC 5.1, 5.2

• NUMEROUS CUSTOMER

ACCELERATED LIFE

TESTING (ALT)

d) Contact Pitch: <0.8 mm?

Since an elastomeric con-

nector depends on the align-

ment of the mating surfaces

by an external means, con-

tact pitch <0.8 mm is not

easily achievable. However,

board real-estate is minimi-

zed by achieving more

adjacent contact pads.

The advantage of this material

construction is that you

achieve 3–4 conductive layers

typically making contact to a

single contact pad on the

board. A single elastomeric

strip (element) is used to con-

nect an entire row of contacts.

Circular Connector Grafted

160 Pos. (LCP Frame)

Test data available on request.

6 – Product Support

Tyco Electronics product

closely-spaced rows of con-

tacts pads than fine-pitch

connectors.

engineers work directly with

customer engineering teams

on modifications and custom

solutions for volume applica-

tions. All aspects of the design

and implementation of the

product are reviewed to ensure

a successful product launch.

2. Determine if “holder”

functions can be inte-

grated within existing

structure?

The multiple layers coupled

with the thousands of con-

ductive paths in each layer

ensure reliable interconnect.

Ultra-Low Profile Inmolded

8 Pos. 0.5 mm Height Silicone

Rubber Base

The holder is synonymous

with the plastic that sur-

rounds traditional mecha-

nical connectors. The most

efficient and cost effective

way to implement a STAX

connector is by incorpora-

ting a retaining slot into an

existing housing or board

separator as shown on the

reference designs.

Why use a

Tyco Electronics

Elastomeric Connector

Custom Capability

Application requirements vary

dramatically across the many

industries that elastomers are

used. The technology is

flexible in adapting to many

of these requirements but, as

with any product, there are

limits.

1 – Simple Implementation

Assembly is easy as making

a sandwich. There is no

soldering, no special tooling

or machinery.

2 – Easily Modified

How often is a standard off-

the-shelf connector ideal for

Module-to-Board Grafted

220 Pos. Peripheral Contact

Ultem Frame

In an approved application,

Elastomeric Technologies

All specifications subject to change. Consult Tyco Electronics for latest specifications.

49

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

STAX™ Array Connector

Features

Allows connection to non-stan-

dard pad patterns without tooling

and long lead time for custom

connector.

• Long term reliability and

durability

• Economical

• One piece connector

• Custom prototype samples

within 1 week

Physical Properties

Height:

0.5–1.5 mm

Minimum Pad Pitch:

0.8 mm

Individual Conductor Width:

0.063 mm

Individual Conductor Length:

0.25 mm

The STAX Array connector is an anisotropic conductive mat material that was developed to

interconnect land grid array pad patterns as well as random, circular or other non-linear circuit

board pad patterns. As long as the material is deflected between two mating mirror image pad

patterns electrical connection is made between the mirror image pads.

Using our core competency in laminating silicone, the Tyco Electronics Elastomeric Technologies

product line has created a mat material having .063 mm (0.0025″) x 0.25 mm (0.010″) conductive

silicone segments surrounded on all sides by 0.063 mm thick nonconductive silicone insulation.

As long as a minimum of 0.4 mm separation is maintained between adjacent pads on the mating

surface, shorting is avoided.

Typical Electrical Properties

Contact Resistance¹⁾:

50 mΩ

Dielectric Constant:

3.1

STAX array connectors are very easily customized to the users required dimension and can be

made in either rectangular or die-cut shapes. Z-axis thicknesses between 0.5 mm and 1.5 mm

and dimensions from 2 mm x 2 mm to 60 mm x 60 mm can be accommodated.

Insulation Resistance¹⁾:

10¹²Ω min

Dielectric Withstanding Voltage¹⁾:

1000 V without breakdown or arcing

Current Carrying Capacity¹⁾:

0.5 A

Deflection Force:

0.5–1.5 Newtons/mm²

Environmental Parameters

Operating Temperature:

–40 ºC to +125 ºC

Moisture:

0 to 100% RH

Test Report:

TR 368

¹) Elastomer: 1.0 mm (0.039″) high.

Boards: Gold plated contact pads 0.5 mm

(0.020″) wide on 1.0 mm (0.039″) pitch.

Part No. 3-1442003-2

50

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Elastiboot™ Connectors for Microphones

Elastiboot™ Connectors

for Microphones

Features

• Boot and STAX elastomeric

connector are together as one

inseparable piece.

• Elastiboot allows microphone

to be provided as an assembly

complete with acoustic boot

and STAX compression-style

connector.

• Large deflection range of

5 thru 50%.

• Standard Elastiboots available

for smaller industry-standard

leadless microphones of 4.0

and 6.0 mm diameter.

• Elastiboot uses reliable,

superior performing Tyco

Electronics STAX elastomeric

compression connectors.

• Custom, application specific

designs can be created.

The Tyco Electronics line of Elastiboot connectors combines an elastomeric connector with an

acoustic grommet or “boot” for industry standard 4.0 and 6.0 mm diameter leadless microphones.

In a continued effort to lower the cost of hand-held electronic devices, high volume manufacturers

are looking for value added sub-assemblies from their component suppliers.

Elastiboot connectors from the Tyco Electronics Elastomeric Technologies product line fill this

need by providing ease of assembly in connecting small form-factor microphones to host PCBs.

Elastiboots combine the connector with the acoustic grommet (or “boot”) to create a one-piece,

orientation free subassembly.

Physical Properties

Elastiboot connectors make assembly of microphones into portable electronic devices economical

and robust.

Height:

See chart

Minimum Pad Pitch:

■ Microphone is placed into

See PCB drawings

Elastiboot connector.

STAX Conductor Width:

0.064 mm (.0025″)

■ Elastiboot/Microphone as-

sembly is placed in cavity in

front housing of mobile unit.

STAX Conductor Pitch:

0.127 mm (.005″)

■ Makes blind-mate connec-

tion to concentric-ring pads

on PC Board during final

assembly of unit.

Elastiboot with Seal Ribs

Elastiboot without Seal Ribs

Environmental Parameters

■ Concentric-ring pad layouts

allow for orientation-free

assembly.

Operating Temperature:

–40 ºC to +125 ºC

Moisture:

0 to 100% RH

■ Elastiboot connector cap-

tures microphone while

Typical PCB Pattern for

4.0 mm Diameter Microphone

Typical PCB Pattern for

6.0 mm Diameter Microphone

providing electrical connec-

tion and acoustic sealing.

Test Report:

TR 341

Microphone

Dimensions for Cavity in Host (above)

Outer Diameter/

Thickness

(mm)

Part Number

STAX Type

Seal Ribs

Diameter

Max. Cavity Depth

Mated Height

2-1442003-2

6-1442001-3

9-1442002-7

5-1442003-9

1-1442002-5

9-1442000-8

8-1442001-6

6-1442001-0

4.0 / 1.0

4.0 / 1.85

6.0 / 1.0

6.0 / 1.3

6.0 / 1.5

6.0 / 2.2

LD

Yes

No

5.17

5.12

7.37

7.50

7.30

7.50

1.60

2.60

1.35

1.70

2.26

2.30

5.26

5.37

7.46

7.65

7.66

7.44

7.50

Gold

LD

Yes

No

SD

LD

Yes

All specifications subject to change. Consult Tyco Electronics for latest specifications.

51

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

STAX™ Elastomeric Connectors for COG LCDs

STAX™ Elastomeric

Connectors for COG LCDs

Features

• Easily customized.

• Connects display glass or flex

circuit to PCB.

• Inhibits movement of the con-

tact interface during vibration.

• Stable electrical performance

over a wide working range of

deflection.

• Can accommodate glass-to-

board separations of as little as

0.25 mm.

• Applications engineering sup-

port from Tyco Electronics to

incorporate STAX elastomeric

connectors into your product.

Support includes board layout,

slot definition, alignment and

compression.

• In-molded sub assemblies can

be created to combine LCD

connector with backlighting

connection while providing

orientation features.

Low resistance STAX elastomeric connectors are the best means of connecting to Chip-on-Glass

and other types of LCD modules. Gold STAX and STAX LD elastomeric connectors are easily

customized without the tooling charges and lead times typically found with stamped contacts

and molded insulators. They can be retained in a slot incorporated into the light guide that allows

for automatic placement of the light guide subassembly.

STAX connectors provide a gasket-like contact interface to the

ITO traces thereby sealing the interface from the environment.

At the same time, the compliant sealing properties of the silicone

elastomeric connector maintain intimate conformal contact to

the ITO surface.

STAX connectors have proven reliability in COG LCD displays for cell phone units – numbering in

the hundreds of millions.

Physical Properties

STAX LD – Force vs Deflection vs Resistance Curve

Height:

0.5–12.7 mm (.020″–.500″)

Minimum Pad Pitch:

0.50 mm (.020″)

Conductor Width:

0.064 mm (.0025″)

Conductor Pitch:

0.127 mm (.005″)

Typical Electrical Properties

Contact Resistance: See chart

Dielectric Constant: 3.1

Insulation Resistance^:

10¹²Ω min

Dielectric Withstanding Voltage¹⁾:

Gold STAX – Force vs Deflection vs Resistance Curve

1000 V without breakdown or arcing

Current Carrying Capacity: 1 Amp

Environmental Parameters

Operating Temperature:

–40 ºC to +125 ºC

Moisture: 0 to 100% RH

Technical Documents

Engineering Test Report:

TR 341

52

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

SMT-ETI-1 STAX™ Connector

SMT-ETI-1

STAX™ Connector

Features

• Surface Mount / Pick-n-Place

• Tape & Reel or Bulk Packaging

• Low Resistance: 20 µOhm

• Deflection Range: 5–65%

• Long term reliability and

durability

• Economical

• Readily customized

(Hd: 1.0 to 2.25 mm )

• No tooling required

• One-piece connector

• Quick delivery custom proto-

type samples

Tyco Electronics Elastomeric Technologies™ continues to demonstrate technology leader-ship

with the introduction of the INDUSTRY’S FIRST surface-mount elastomeric connector product.

Physical Properties

The SMT-ETI-1 is a dedicated single position connector used in lieu of a spring-finger, pogo-pin,

or compliant materials in portable electronic and communication devices. The applications include

grounding, power connection, and shielding to eliminate EMI and RFI.

Deflected Height:

1.0–2.5 mm (.039″–.098″)

Minimum Pad Pitch:

3.0 mm (0.120″)

The SMT-ETI-1 is an integration of Tyco Electronics’ ETI and

MID technologies:

3.4

Elastomer Width:

1.00 0.10 mm

■ The surface mount holder is a gold plated plastic and

provides a low profile – small form factor “standard” base.

Elastomer Length:

1.95 0.15 mm

1.0

2.5

Conductor Pitch:

0.127 mm (.005″)

■ A STAX™ HT (high temperature resistant) elastomer is

grafted into the SMT holder for a single-piece assembly.

Pad Dimensions:

See below

A STAX™ elastomer has the widest range of deflection in low

profile connection (5 thru 65%) while maintaining consistent

performance and reliability. Combining the standard base with

the flexibility of the elastomeric manufacturing process allows

for an optimized connector for each application.

Part No. 1-1442004-7

Typical Electrical Properties

Contact Resistance¹⁾:

20 mΩ

Current Carrying Capacity¹⁾:

This minimizes the deflection forces while compensating for

z-axis tolerances. The silicone provides the normal force of the

connector, seals the contact interface, and even conforms to

irregular surfaces. Standard parts are available – modifications

can be easily created.

1.5

2 Amps

¹) Test Boards: Gold plated contact pads

2.4

The electrical characteristics of the SMT-ETI-1 rival all competitive

technologies in resistance and current carrying capacity.

Top PCB Contact Pad

Environmental Parameters

The SMT-ETI-1 STAX connector features silver particles

embedded within a low durometer silicone. Within each of the

conductive layers, the conductive particles create thousands

of conductive paths. Each conductive layer provides multiple

points of contact to the substrate interface.

(Flash-Gold) Dimensions

Operating Temperature:

–40 ºC to +125 ºC

2.5

Moisture:

0 to 100% RH

The pitch of the conductive layers is only 0.127 mm (0.005″),

allowing multiple conductive layers to make contact to each

substrate pad.

3.4

Technical Documents

Qualification Test Report:

TR 371

Bottom PCB Contact

Solder Pad Dimensions

All specifications subject to change. Consult Tyco Electronics for latest specifications.

53

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

STAX™ Coax Connector

Tyco Electronics’ STAX coax connector is

the first surface mount RF coax connector

on the market that uses elastomeric con-

nector technology to provide an economi-

cal means to achieve low board separation

while maintaining excellent RF signal

integrity between PCBs.

STAX™ Coax Connector

Features

• Low cost, low height and high

performance

• Low insertion loss 0–0.5 dB

from 0–6 GHz

• VSWR <1.07 from 0–6 GHz

• Wide working range of deflec-

tion

• Long term reliability and dura-

bility

The connector uses laminated sections of

conductive and non-conductive silicone that

are tuned to provide a 50 ohm impedance

line between mated substrates.

The single piece construction of the STAX coax connector eliminates some of the signal anomalies

normally associated with mated pairs of metal contact coax connectors. The dimensional rela-

tionship of the inner and outer conductor is consistently maintained throughout the connector.

• Surface mount / pick and place

• Low board separation <2.5 mm

• Technology can support board

separations <1.5 mm

• Easily modified free height

• No tooling required for height

modifications

With its metal holder, the STAX coax connector can be surface mount soldered to the PCB. An

additional metal SMT holder aligns the connector to the mating PCB. If adequate PCB alignment

is already maintained by other means, the coax connector may not need the additional mating

receptacle and can become a blind-mating connector. This has an additional advantage in space

constrained mobile applications where very fine-pitch board-to-board connectors are also used.

• Modified prototype samples

within 2 weeks

619229-1 SMT STX Coaxial Connector Assembly

PCB Pattern

Physical Properties

Board Separation:

2.5 mm 0.2 (Standard Part)

Center conductor

PCB Board Area:

4.0 mm diameter

Dielectric material board

Outer conductor

Solder ring

Environmental Parameters

Solder mask

Operating Temperature:

–40 ºC to +125 ºC

Moisture:

0 to 100% RH

Conductive elastomer outer conductor

Conductive elastomer inner conductor

Non-conductive elastomer

Electrical Properties

Contact Resistance:

<50 mΩ

Insulation Resistance:

619238-2 SMT Mating Target Holder

PCB Pattern for Mating Target

10¹²Ω min

Dielectric Withstanding Voltage:

1000 Volt

Center conductor

Technical Documents

• Qualification Test Report – TR 368

• RF Performance Report – 00266

Dielectric material board

Outer conductor

Solder ring

Solder mask

Part No. 619229-1

STAX SMT Coax Connector Assembly: Consists of STAX coax elastomer

in round SMT holder.

Part No. 619238-2

Part No. 1442004-1

Mating SMT Target Holder: Controls alignment between PCBs

STAX Coax Elastomer only: Used with customer furnished holder

54

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Connectors

Catalog 1654270-2

Revised 8-2007

Vibration Motor Connector

Tyco Electronics’ vibration motor

elastomeric assembly is an innovative

option to standard motor attachment

methods using our proven STAX™

layered elastomeric connector

product line.

Vibration Motor Connector

Features

• Flexibility to modify the

standard product offering to

meet custom applications

• Eliminates obsolete inventory

due to changing application

requirements

• Minimize PCB space

• Eliminates fretting corrosion

issues

Hundreds of millions of our STAX

family of connectors have been used

to connect flex circuits, LCD’s, micro-

phones, and speakers within space-

constrained products such as mobile

phones, pagers, PDAs and disk

• Enables single piece assembly

drives. This solution allows the com-

pression mate of a vibration motor to

almost any printed circuit board.

• Eliminates troublesome solder-

ing of wires or use of male /

female connectors

• Eliminates the need and time

to tool many different spring

contacts

The STAX connector consist of

alternating layers of conductive and

non-conductive silicone.

These layers are typically 0.064mm thick on 0.127 mm centers and make redundant surface-to-

surface connection when deflected between the flat contact pads on the vibration motor to the

main PC Board. Vibration motor connectors provide a excellent combination of electrical perform-

ance, reliability, functionality and durability.

• Economical

• Long term reliability and

durability

• Custom prototype samples

within 2 weeks

Physical Properties

Application Deflected Height:

8.7 .02 mm (.342 0.008″)

Compression Force:

0.4 kg (nominal deflection)

Grommet Material:

Silicone Rubber

(55 Shore A durometer)

Typical Electrical Properties

Standard Voltage:

1.3 V DC

Rotating Direction:

Clockwise

Standard Load Rotation:

9000 2000

Standard Load Current:

105 mA

Starting Current:

130 mA max

Insulation Resistance:

1 Mega Ohm

Environmental Parameters

Part No. 6-1442002-7

Part No. 7-1442002-3

Part No. 7-1442002-2

Part No. 7-1442002-1

Vibration Motor Connector Assembly

Rubber Vibration Motor Boot

Sanyo Motor # RS-2561

Operating Temperature:

–10 ºC to +60 ºC

Moisture:

0 to 100% RH

Elastomeric Silver STAX™ Connector

All specifications subject to change. Consult Tyco Electronics for latest specifications.

55

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Engineering Notes

56

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Antenna Products

Catalog 1654270-2

Revised 8-2007

Antenna Manufacturing Capabilities

Tyco Electronics

Antenna Products

combines world class antenna

design competency with

unsurpassed integration and

optimization skills to provide

the best integrated solutions

for various applications.

Our global footprint and

wide variety of manufacturing

technologies allows our

customer s to be able to

choose from a large base of

manufacturing technologies

and factory locations.

Applications

Voice

Tyco Electronics Antenna Products provides handset OEM’s with the highest performing, lowest

cost embedded antenna solutions. With over 500 million Tyco Electronics cellular handset

antennas designed and manufactured to date, we offer the worldwide spectrum of frequencies

required to support cutting edge embedded antenna solutions. In addition to the handset

segments, the digital cordless telephone segment presents secondary voice capability for Tyco

Electronics. As this market continues its evolution into the 900 MHz and 2.4 GHz frequency

bands, Tyco Electronics Antenna Products is positioned to provide cutting-edge embedded

antenna solutions.

Data

Rapid growth in the wireless data market is creating unprecedented demand for embedded

antenna solutions. With the proper antenna, these devices can offer “any time” wireless access.

Data devices that utilize Tyco Electronics Antenna Product embedded antennas are PDAs,

laptops, access points, bar code scanners, compact flash cards, PC cards, printers, print

servers, cameras, etc. The Tyco Electronics Antenna Products Group has developed an entire

line of high performance, low cost embedded antennas for wireless data applications. Tyco

Electronics has a variety of cutting-edge " off the shelf” and customized embedded solutions

for virtually any wireless device. Covering 802.11a/b/g/n, WLAN, WWAN, WiBro, WiMAx, WiFi,

DVB and UWB applications.

Bluetooth

Bluetooth is revolutionizing the communication industry. It facilitates fast and secure trans-

missions of voice and data even when devices are not within line-of-sight. Devices include

mobile phones, computers, cameras, printers and virtually any device that has information to

communicate. The Tyco Electronics Antenna Products Group is at the forefront of Bluetooth

antenna development with a number of standard antenna products that are already being

utilized in the first generation Bluetooth devices on the market.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

57

Products for Mobile Equipment

Antenna Products

Catalog 1654270-2

Revised 8-2007

Antenna Manufacturing Capabilities

Three Key Technologies

MID (Molded Interconnect Device) Antennas

In 2000, Tyco Electronics acquired Molded Interconnect Device, LLC (MID). Now part of Tyco

Electronics Antenna Products, MID is headquartered in Rochester, NY and prides itself in being the

world’s leader in utilizing its technology to make everyday products better. With over 500 million

parts in service, our products are being utilized in applications ranging from joysticks to cell phones

as well as minivans to airplanes. In its most basic form, MID technology can be defined as any

product that results in selectively plated plastic parts. This technology results in outstanding repeat-

ability, which is ultimately suitable for the design and production of complex shaped antennas.

MID Two Shot Antennas

■ Design flexibility for 3D patterning

■ Fewest manufacturing steps and processes

■ Repeatability of manufacturing process

■ Ability to integrate multiple functions

■ Flexible manufacturing capacity

■ Manageability of demand increases

■ Simple low cost standardized interconnect utilized

■ Best utilization of the 3D space that is available

■ Tightest tolerances for pattern registration

Stamped Metal and Overmolded

Tyco Electronics Antenna products has developed a line of low profile, high performance

Stamped Metal embedded antenna solutions for single-, dual-, tri-and quad-band applications.

Tyco Electronics Stamped Metal antennas offer OEMs, a low cost and highly repeatable manu-

facturing solution, in a number of standard “of the shelf” and customized antenna designs. Our

stamped embedded antennas address the needs of a variety of applications from 400 MHz to

5 GHz such as; mobile phones (AMPS, TDMA, CDMA, WCDMA, PCS, DCS and GSM), cordless

telephones, personal digital assistants (PDA), laptop computers, global positioning system (GPS)

devices and wireless networking (Bluetooth, 802.11 and ISM).

Stamped Antennas

■ Stamped and heatstaked

■ Stamped and overmolded

■ Pure stampings

■ Typically the lowest cost antenna technology

when considering the interconnect cost as well

■ Interconnect can be designed in (contacts)

■ Production die is high volume capable

■ Hand assembly stations can be added for volume

upswings

58

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Antenna Products

Catalog 1654270-2

Revised 8-2007

Antenna Manufacturing Capabilities

FPC and Printed Wiring Boards (PWB) Antennas

The Tyco Electronics Antenna Products Group has developed a line of low profile, high perform-

ance Print Wiring Board (PWB) antenna solutions for single-, dual-, tri-and quad-band applications.

Allowing virtually any wireless product to operate on different frequencies without multiple

antennas. Our FPC and PWB antenna solutions address the need of a variety of applications:

mobile phones (AMPS, TDMA, CDMA, WCDMA, PCS, DCS and GSM), cordless telephones,

personal digital assistants (PDA), laptop computers, global positioning system (GPS) devices and

wireless networking (Bluetooth, 802.11 and ISM).

FPC and PWB Antennas

■ Pure FPC/PWB

■ FPC on a carrier

■ Best flexibility for pattern changes during production

■ More ability to quickly tool to higher demand

during production

All specifications subject to change. Consult Tyco Electronics for latest specifications.

59

Products for Mobile Equipment

Antenna Products

Catalog 1654270-2

Revised 8-2007

RF Engineering Capabilities

Antenna Design at Tyco Electronics

Tyco Electronics gets the optimal performance out of antennas by applying system-level integra-

tion and optimization design expertise to each wireless application. Our practical application and

simulation skills are second to none with global expertise in the U.S., Europe, and Asia.

Our global presence places antenna design experts next to the customer.

Modeling and Simulation

3D Part Design at Tyco Electronics

Modeling and Simulation

Need info

■ Pro Engineer Wildfire 2.0

CAD software

■ Auto CAD 2005

■ MPA Moldflow to predict moldings

behaviors

■ Pro Mechanica stress and thermal

analysis software

Customer Support and Design Integration

Tyco Electronics provides world class antenna design integration and optimization to its cus-

tomers. Tyco Electronics prides itself in working with customers to optimize not only the antenna

performance but also the total system performance. The earlier that Tyco Electronics can be

involved in an integration project, the more opportunities there will be to deliver the most optimal

solution.

Six Step Integration Process

■ Evaluation:

Is the customer’s expectation reasonable?

■ Modeling:

Utilizing Ansoft HFSS

■ Rapid Prototyping:

Are we making electrically working samples or just dummy

mechanical samples? Prototypes can be made in 1 week.

■ Testing & Optimization:

Do we have the real device and is it the latest version?

■ Production:

Pick the manufacturing technology after the design is

developed and fully understanding our customer’s goals

■ Quality Assurance:

Our quality focus is inherent throughout the entire design

process and product life cycle.

60

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Antenna Products

Catalog 1654270-2

Revised 8-2007

RF Engineering Capabilities

■ Six Anechoic Chambers

■ One Satimo Near Field Spherical Measurement Chamber

■ Satimo Upgrade for mobile phone compliance testing

■ Narda^®SAR Measurement Equipment FEM

Electromagnetic Modeling (Ansoft HFSS)

■ One CTIA compliant 3D test chamber

■ Network analyzer to 20 GHz for Laptop programs

RF Engineering Locations:

■ US

■ China

■ Japan

■ Taiwan

■ Korea

■ Europe

Aptos, California

All specifications subject to change. Consult Tyco Electronics for latest specifications.

61

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Engineering Notes

62

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

MID Technology

Catalog 1654270-2

Revised 8-2007

MID

MID Technology

Two Shot MID Technology

at Tyco Electronics

Two Shot

■ Sequential injection molded substrate

■ A plateable resin and a non-plateable resin

■ Imaging in the molding process

■ All electroless plating of catalyzed surfaces

Tyco Electronics prides itself

in being the global leader in

providing Molded Interconnect

Technology (MID). In it’s most

basic form, MID technology

can be defined as any product

that results in selectively plated

plastic parts. This technology

can be used in three basic

ways, to solve 3-dimensional

electro-mechanical problems,

for shielding purposes, or to

develop antennas.

MID Technologies

Tyco Electronics can manu-

facture MID parts using three

manufacturing technologies,

Two Shot, Laser Imaging, and

Laser Direct Structuring.

Laser Imaging MID Technology

Laser Imaging today is typically only used for rapid prototyping

■ Manufacturing using a circuit board production type process

■ Machine or single shot mold in 3–10 days

■ Laser image circuitry in 3–5 days

■ Circuitry and plating are accurate to production processes

All specifications subject to change. Consult Tyco Electronics for latest specifications.

63

Products for Mobile Equipment

MID Technology

Catalog 1654270-2

Revised 8-2007

MID

Laser Direct Structuring Technology

Laser Direct Structuring (LDS) Technology

■ Offers the ability to create parts with finer line width and spacing than conventional MID

processes will allow for.

■ The structure is molded in a standard single shot mold using one of several proprietary plastics

available.

■ Desired interconnect pattern is directly written on the resulting molded part and the conductive

paths are plated using industry standard methods.

■ The plating adheres only where the plastic has been activated by the laser.

3D Part Design

Tyco Electronics provides its customers vast design expertise over a wide variety of manufac-

turing technologies. Our design engineers are experts in two shot design and product integration

for MID products. Optimal solutions are engineered with the appropriate MID technology to best

suit the application.

Modeling and Simulation

Tyco Electroniocs employs the most up

to date design tools available. We use

sophisticated 3D modeling and simulation

packages to accurately manufacture and

predict the end product.

■ Pro Engineer Wildfire 2.0 CAD software

■ Auto CAD 2005

■ MPA Moldflow to predict molding

behaviors

■ Pro Mechanica stress and thermal

analysis software

64

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Cable Products

Catalog 1654270-2

Revised 8-2007

USB Data Cable Assembly

Features

■ USB Data cable intend to

connect a mobile phone to

computer etc.

■ Can be used as charger

■ Connector and cable are

approved by USB Org.

■ PU and PVC cable,

both types are available.

Connector

USB A Type

USB B Type

Mini USB A Type

Mini USB B Type

Can design the connector to

mate customer system

USB Cable Assembly

Cable

1P+2C+AL+D+B USB 2.0

28 AWG x 28 AWG

28 AWG x 26 AWG

28 AWG x 24 AWG

28 AWG x 22 AWG

28 AWG x 20 AWG

Overmolding

PVC

PVC Free/PU

Connectors

All specifications subject to change. Consult Tyco Electronics for latest specifications.

65

Products for Mobile Equipment

Cable Products

Catalog 1654270-2

Revised 8-2007

Music Cable Assembly

Features

■ Audio cable intend to connect

a mobile phone to the line-in

on a stereo amplifier.

■ PU and PVC cable,

both types are available.

Connector

RCA Plug

2.5 mm Audio Plug/Jack

3.5 mm Audio Plug/Jack

Adapter from Plug to Jack

Can design the connector to

mate customer system.

Cable

Twin Cable

Shielded Twisted Pair Cable

Music Cable Assembly

Overmolding

PVC

PVC Free/PU

Connectors

66

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Cable Products

Catalog 1654270-2

Revised 8-2007

Charger Cable Assembly

Features

■ The semi-goods or finished

goods intend to be used for

the charger.

■ PU and PVC cable,

both types are available.

Connector

USB Plug

2.0 mm DC Plug

3.5 mm DC Plug

Can design the connector to

mate customer system.

Cable

Can follow customer

specification.

Charger Cable Assembly

Overmolding

PVC

PVC Free/PU

Connectors

All specifications subject to change. Consult Tyco Electronics for latest specifications.

67

Products for Mobile Equipment

Cable Products

Catalog 1654270-2

Revised 8-2007

Mobile Phone Headset Solution

Mobile Phone

Headset Solution

Speaker

Diameter:

15 mm

Impedance:

16 Ω 15%

Frequency Range:

20 Hz up to 20 KHz

Sensitive:

108 4dB at 1 kHz

Nominal Power:

3 mW

Maximum Power:

5 mW

Connector

3 Pin, gold or nickel plating

Cable

Length:

400 15 mm

Pull Force:

30 N/min

Flexing Cycle:

3000 times/300 g

Non-Migration:

PS 60°, 500 g/72 H

Cover:

PVC

Color:

Grey/Silver

68

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Cable Products

Catalog 1654270-2

Revised 8-2007

Bluetooth Hands-Free Solution

Bluetooth

Hands-Free Solution

Key Features

■ Continuous Talk Time: 9 hours

■ Standby Time:

400 hours (16 days)

■ Weight: 12 g

■ Voice Dial

■ Redial Last Number1

■ Call Muting

■ Multi Pairing2

■ Fast Charge 2 hours

■ Reversible hook with anti

allergic soft material for long

hold.

■ Bluetooth R v 1.2 Headset and

hands-free profile compatible.

■ For phones with hands-free

profile function.

■ For headsets which are both

in the headset profile.

■ Color: Grey/Black

E11

Key Features

■ Continuous Talk Time: 9 hours

■ StandbyTime:

400 hours (16 days)

■ Weight: 14 g

■ Voice Dial

■ Redial Last Number1

■ Call Muting

■ Multi Pairing2

■ Fast Charge 2 hours

■ Reversible hook with anti

allergic soft material for long

hold.

■ Bluetooth v 1.2 headset and

hands-free profile compatible.

■ For phones with hands-free

profile function.

■ For headsets which are both

in the headset profile.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

69

Products for Mobile Equipment

Cable Products

Catalog 1654270-2

Revised 8-2007

High-Speed Micro-Coax Cable Assembly (MCC)

High-Speed Micro-Coax

Cable Assembly (MCC)

Features

■ Thin cable thickness and

fine pitch can save room for

application.

■ Multi-position can transfer

5 to 25 pairs of signal.

■ High soldering quality makes

high performance connect

between cable and contact.

Tyco Electronics has special

know-how for whole assembly

process.

■ Tyco Electronics design the

connectors by herself.

Connector

No. of Positions:

10, 17, 20, 30, 40, 44, 50 pos.

are available to use.

Pitch:

0.4, 0.5, 0.6, 1.0 mm pitch are

available.

Direction:

Straight and 90 degree are

available.

Cable

Gage:

30, 32, 36, 40, 42 AWG cables

are available.

Pairs:

Single and Twin-Coax cables

are available.

Micro-Coax Cable Assembly

Connectors

70

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Batteries

Catalog 1654270-2

Revised 8-2007

Battery Systems

Designing and Building Battery Systems for Technology

The Leading Edge

in Custom Power

Solutions

Tyco Electronics Battery Systems (TEBS) is a worldwide leader in the design and manufacture

of custom battery packs and systems for any portable electronic device or stationary back-up

power. A battery system is much more than a collection of cells. It is the source of the power

that enables your products to their fullest potential.

When you specify TEBS, you’re getting a dedicated team of innovative designers, trained to

devise the perfect solution within your power, space, weight and cost parameters.

From Concept Through Total Design

TEBS’ worldwide engineering design team incorporates electrical, mechanical and chemical

expertise to shorten the time required for design and development, ultimately reducing product

delivery times. Our cutting edge technology can increase functionality while reducing size, weight

and cost. TEBS has the ability to offer a turnkey design and manufacturing solution to match

the battery system to the specifications of your products.

Our unique program management system gives you a champion inside TEBS, charged with

supervising the design process from concept through finished product. When you specify TEBS,

you are buying the power to bring innovations to market, on time.

Design Innovation

With the goal of maximising compatibility with your product, our mechanical and electrical design

team will use creativity and technology to provide the optimum solution. Our engineering and

technical sales personnel are experienced in solving complex problems, validating the design

steps to ensure downstream performance, and developing quality designs that work. TEBS’

innovations deliver everything needed to get to market sooner, with an added competitive edge.

From Concept Through Total Design

At TEBS, we provide powerful solutions for a wide range

of OEM applications, including:

● Cellular Telephones

● Laptop Computers & PDA’s

● Power Back-Up (i.e. Mass Data Storage Units)

● Digital Still & Video Cameras

● Two-Way Radios

● Data Acquisition

● Test Equipment

● Medical Applications

● Handheld P.O.S. & GPS

● Outdoor Telecom UPS

All specifications subject to change. Consult Tyco Electronics for latest specifications.

71

Products for Mobile Equipment

Batteries

Catalog 1654270-2

Revised 8-2007

Battery Systems

Core Manufacturing Processes

Cost effective and flexible manufacturing methods are at the core of TEBS’ working methodology.

Incorporating advanced production techniques and the most reliable and efficient equipment

available in both manual and automated processes. TEBS’ production techniques ensure the

consistency and high performance of the finished product.

Flexible, future proof processes allow large volume manufacturing capacities and a higher degree

of repeatability in both quality and quantity of products. Integrating the best in both design and

assembly, TEBS gives you a world-class combination in both service and technology.

Testing and Qualification

With a fully integrated professional battery pack and cell testing facility in Shanghai, China,

TEBS provides complete in-house component and battery pack approval, typically covering cell,

PCB and full product assemblies. Testing includes pre-compliance and planned compliance

testing in safety, abuse, EMC, environmental reliability, performance and life testing through

internal, customer and regulatory specifications and standards.

In Shanghai, an array of environmental chambers, cell and pack cycling channels and other

specialized equipment is housed in over 6,000 square feet of dedicated testing space. These

unique independent testing capabilities offer our customers the ability to complete all of their

required specification and environmental testing under one roof and enables TEBS to offer the

complete turnkey power solution.

The lab is approved by UL to conduct UL1642 and UL2054 testing and issue certification to

both standards. TEBS also has senior level representation on the UL Standards Technical Panel

(UL1642 & UL2054) and IEEE-P1725 Work Group. TEBS has the additional capability to conduct

all UN/DoT testing in-house and provide the required certification documents.

Global Commitment

TEBS’ world-wide engineering design team

incorporates electrical, mechanical and chemical

expertise to shorten the time required for design

and development, ultimately reducing product

delivery times. Our cutting edge technology can

increase functionality while reducing size, weight

and cost.

TEBS has the ability to offer a turnkey design

and manufacturing solution to match the battery

system to the specifications of your products.

Our unique program management system gives

you a champion inside TEBS, charged with

supervising the design process from concept

through finished product.

When you specify TEBS, you are buying the

power to bring innovations to market, on time.

72

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Mechatronic Center Niefern

Catalog 1654270-2

Revised 8-2007

Technology Portfolio

Reel-to-Reel Stamping

Mechatronic Center

Niefern

■ High-speed stamping

■ 4 fold stamping tool,

70 mm width

Advanced Tyco Electronics

technologies allow us to

produce highly competitive

semi-finished products for

card manufacturers of the

■ Material: Copper alloy

st

1 , 2^ndand 3^rdgeneration.

■ High-Speed Stamping

■ Selective Plating

■ Laminating

■ Reel-to-Reel Over-Molding

Reel-to-Reel Plating

The products are delivered

on a reel and can be used

for chip mounting by our

customers.

■ Plating in 70 mm width

■ Selective Metalization:

● Overall Ni

● Contacts Side:

– Spots on contact area

– Gold flash

● Bonding Side:

– Strips or Spots

■ Slitting in 35 mm

Reel-to-Reel Lamination

■ Clean room class 100,000

■ High accuracy dielectric

stamping

■ Mechanical alignment and

prefixing of dielectric

■ Leadframe roll lamination

■ 100% video control

Reel-to-Reel

Over-Molding

■ Free cutting in line

■ Multiple cavities

mold

Bonding Capability Guaranty

All specifications subject to change. Consult Tyco Electronics for latest specifications.

73

Products for Mobile Equipment

Mechatronic Center Niefern

Catalog 1654270-2

Revised 8-2007

LAMFRAME

Key Features

■ Low cost tape for memory

and microprocessor

applications

■ Compatible with industry

standard processes

■ Allow wide range of dielectric

(type and thickness)

■ Optimisation of dielectric

area for cost reduction

■ Minimum Slit Size:

0.15 mm

This technology allows Tyco Electronics to

offer a wide range of products for memory

and microprocessor smart cards with:

■ Plating Finishes

● Gold

● “Grey like” plating

■ Dielectric

● Polyimide

● Glass epoxy

● Polyester

● …

■ Customized thickness

■ Disconnection option

Lamination process is carried out in a clean room to avoid any outside contamination.

Tyco Electronics is able to perform bonding tests with gold or aluminium wires during design phase

but also to ensure the quality during all the life time of the products.

Products are today customer specific, Tyco Electronics Open Design available.

74

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Mechatronic Center Niefern

Catalog 1654270-2

Revised 8-2007

Mini SIM Card Packaging

Mini SIM

Card Packaging

Tyco Electronics propose

a new Packaging for the

3^rdGeneration of SIM Cards

The leadframe is over moulded

with a plastic package at

dimension close to the final

Mini SIM card body.

This technology allows our

customers to work directly

on advanced product and

use their standard available

reel-to-reel equipments.

Key Features

■ Microelectronic can be made on semi final packaging, no module out cutting and embedding

operation.

■ Lower risk and process time improvement.

■ Personalisation can be realized separately on tapes, and bring together by a final operation.

■ No additional card body is needed, but also possibility to plug in 1^stor 2^ndcard body generation.

Produced with the Standard

Tyco Electronics Technologies

■ High-speed stamping

■ Selective plating

■ Laminating

■ Reel-to-reel over moulding

All specifications subject to change. Consult Tyco Electronics for latest specifications.

75

Products for Mobile Equipment

M/A-COM Antenna Products

Catalog 1654270-2

Revised 8-2007

GaAs SP6T 2.5 V Power Switch

GaAs SP6T 2.5 V

Power Switch

Features

M/A-COM’s MASWSS0091 is a

GaAs PHEMT MMIC single pole

six throw (SP6T) high power

switch die. This switch is ideally

suited for applications where

high power, low control voltage,

low insertion loss, high isolation,

small size and low cost are

required.

0.82

The MASWSS0091 is designed

for dual-, tri-, and quad-band

GSM and DCS/PCS handset

systems that connect separate

transmit and receive functions to

a common antenna, and can be

used in all systems operating up

to 2.5 GHz requiring high power

at low control voltage.

1.01

Functional Schematic

Die Layout

GaAs SP3T 2.6 V CDMA/GPS Switch

GaAs SP3T 2.6 V

CDMA/GPS Switch

Features

M/A-COM’s MASWSS0191 is an

industry leading GaAs PHEMT

MMIC single pole three throw

(SP3T) CDMA-GPS switch in a

2 mm 8-lead STDFN package.

The MASWSS0191 is uniquely

configured to enable switching

from a common antenna port to

CDMA cellular, CDMA PCS, or

GPS ports. The design is asym-

metric and has been fully

optimized for excellent cross

modulation performance in CELL

and PCS paths while still main-

taining excellent insertion loss

and isolation. The MASWSS0191

is fabricated using a 0.5 micron

gate length GaAs PHEMT pro-

cess. The process features full

passivation for performance and

reliability.

2.0

Functional Schematic

76

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Lithium Cells and Battery Packs

Lithium Cells and

Battery Packs

External shorts, runaway

charging conditions, or

abusive charging can cause

considerable damage to

primary and secondary lithium

cells. Rechargeable lithium

batteries are used in notebook

computers and cellular phones

as well as other portable

electronic applications.

Product Series:

LR4, LTP, SRP, VLR, VTP

All specifications subject to change. Consult Tyco Electronics for latest specifications.

77

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Rechargeable Battery Pack Protection

Rechargeable

Battery Pack Protection

Due to external shorts, run-

away charging conditions, or

abusive charging, considerable

damage can be sustained in

both battery cells and pack

surroundings. The most

common applications are

nickel-cadmium (NiCd), nickel-

metal-hydride (NiMH), and

lithium-ion (Li-ion) battery

packs for cellular phones,

laptop/notebook computers,

and other portable electronic

applications.

Product Series:

LR4, LTP, SRP, VLR, VLP, VTP

78

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Portable Electronics Input Port Protection

Portable Electronics Input

Port Protection

The use of an incorrect or

faulty adapter/charger can irre-

parably damage unprotected

portable electronics equip-

ment. Typical applications

include cellular phones,

PDAs, and digital cameras.

Product Series:

nanoSMD, microSMD, miniSMD

alternative position

PolySwitch device

Phone supply

FET or BJT

PolySwitch

Strap device

3x NiMH

Charge

OV

Control IC

From

AC

PWM

Ident

Adapter

OC2

OC1

Battery Pack

All specifications subject to change. Consult Tyco Electronics for latest specifications.

79

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player

HDMI: LCD, Plasma, HDTV,

Set-Top Box, DVD Player

HDMI (High Definition Multi-

media Interface) applications

such as LCD displays, Plasma

displays, High Definition Tele-

vision set-top boxes, and

DVD players are susceptible

to electrostatic discharge.

To help protect the high speed

TNDS lines against ESD hits

PESD devices are used, two

per line.

Product Series:

PESD

80

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Strap Battery Devices – VLR Series

Strap Battery Devices –

VLR Series

Features

■ Current ratings from

1.7 A to 2.3 A

■ Voltage: 12 V

■ Agency Recognition:

UL, CSA, TÜV

■ Fast time-to-trip

■ Low resistance

Lead Material:

0.125 mm nominal thickness,

quarter-hard nickel

Tape Material:

Polyester

Figure B1

Figure B2

Figure B3

Dimensions (mm)

A

B

C

D

E

F

Part Number

Figure

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

85°C Typical Activation

VLR

VLR170F

20.8

38.8

20.8

23.0

29.3

23.0

20.9

25.3

20.9

23.2

41.2

23.2

24.5

31.7

24.5

23.1

27.7

23.1

–

0.8

0.7

0.8

0.7

0.8

0.7

3.5

2.9

4.9

3.5

4.9

3.9

3.7

3.3

3.1

5.3

3.9

5.1

4.5

8.7

5.3

4.7

5.2

4.1

3.5

4.1

6.5

10.30

6.7

4.5

18.70

5.3

06.5

20.3

06.7

05.4

12.5

05.7

05.8

05.7

06.0

2.4

3.9

2.9

3.9

2.6

4.1

3.1

4.1

B1

B2

B1

B2

B1

B3

B2

VLR170LF

VLR170UF

VLR175F

7.2

3.8

VLR175LF

VLR175UF

VLR230F

6.8

10.00

4.3

7.5

5.8

4.1

VLR230F-C36

VLR230SUF

5.7

3.5

6.0

4.1

All specifications subject to change. Consult Tyco Electronics for latest specifications.

81

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Strap Battery Devices – VLP Series

Strap Battery Devices –

VLP Series

Features

■ Current ratings from

2.1 A to 2.7 A

■ Voltage: 16 V

■ Agency Recognition:

UL, CSA, TÜV

■ Fast time-to-trip

■ Low resistance

Lead Material:

0.125 mm nominal thickness,

quarter-hard nickel

Tape Material:

Polyester

Figure B4

Dimensions (mm)

A

B

C

D

E

F

Part Number

Figure

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

90°C Typical Activation

VLP

VLP220F

VLP270F

21.1

20.9

23.3

23.1

0.6

0.8

3.5

4.9

3.9

5.3

5.1

4.1

6.8

5.8

5.1

4.1

6.8

5.8

2.9

3.9

3.1

4.1

B4

82

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Strap Battery Devices – VTP Series

Strap Battery Devices –

VTP Series

Features

■ Current ratings from

1.1 A to 2.4 A

■ Voltage: 16 V

■ Agency Recognition:

UL, CSA, TÜV

■ Fast time-to-trip

■ Low resistance

Lead Material:

0.125 mm nominal thickness,

quarter-hard nickel

Tape Material:

Polyester

Figure B5

Figure B6

Figure B7

Figure B8

Figure B9

Dimensions (mm)

A

B

C

D

E

F

Part Number

Figure

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

90°C Typical Activation

VTP

VTP110F

23.6

15.4

20.9

21.2

25.8

21.2

20.9

29.0

20.9

23.8

25.6

17.5

22.9

23.2

28.2

23.2

23.1

32.0

23.1

26.2

–

0.5

–

0.7

0.8

0.7

0.8

0.7

0.8

2.7

7.0

4.9

3.5

4.1

4.9

2.9

7.4

5.3

3.9

3.7

4.5

4.3

5.3

7.0

4.0

6.0

4.6

5.7

5.6

3.0

4.0

4.1

3.5

4.1

3.5

8.0

6.2

8.6

6.6

7.3

6.8

4.8

5.4

5.8

5.7

7.0

4.0

6.0

4.6

8.7

5.6

3.0

4.0

4.1

12.50

4.1

3.5

08.0

06.2

08.6

06.6

10.3

06.8

04.8

05.4

05.8

14.5

05.8

05.7

2.3

3.9

2.9

2.4

2.9

3.9

2.5

4.1

3.1

2.6

3.1

4.1

B9

B5

B6

B7

B6

B9

B6

B9

B6

B7

B8

B6

VTP170F

VTP170XF

VTP170XSF

VTP175F

VTP175LF

VTP175UF

VTP200GF

VTP200UF

VTP210GF

VTP210SF

VTP210SLF

VTP210SSF

VTP240F

–

0.6

–

All specifications subject to change. Consult Tyco Electronics for latest specifications.

83

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Strap Battery Devices – LTP Series

Strap Battery Devices –

LTP Series

Features

■ Current ratings from

0.7 A to 3.4 A

■ Voltage: 15 V to 25 V

■ Agency Recognition:

UL, CSA, TÜV

■ Fast time-to-trip

■ Low resistance

Lead Material:

0.125 mm nominal thickness,

quarter-hard nickel

Tape Material:

Polyester

Figure B10

Figure B11

Figure B12

Dimensions (mm)

A

B

C

D

E

F

Part Number

Figure

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

110°C Typical Activation

LTP

LTP070F

LTP070SF

LTP100F

LTP100SF

LTP100SLF

LTP100SSF

LTP180F

LTP180LF

LTP180SF

LTP190F

LTP260F

LTP300F

LTP340F

19.9

20.9

29.0

20.9

24.0

35.5

24.0

21.3

24.0

28.4

24.0

22.1

23.1

32.0

23.1

26.0

37.5

26.0

23.4

26.0

31.8

26.0

0.7

0.6

0.5

0.6

0.5

0.6

1.2

1.0

1.1

1.0

1.1

1.0

4.9

5.2

5.5

4.1

3.5

4.1

9.7

4.1

5.0

6.3

4.0

7.5

5.5

11.00

5.5

7.6

7.0

8.9

5.0

5.5

4.1

12.50

4.1

9.7

4.1

5.0

6.3

4.0

7.5

3.9

4.8

5.9

6.0

5.9

4.1

5.4

6.1

6.6

6.1

B10

B11

B10

B11

B12

B10

B11

B10

4.9

5.2

5.5

4.9

5.2

5.5

4.9

5.2

14.50

5.5

4.9

5.2

4.9

5.2

5.5

4.9

5.2

11.00

5.5

4.9

5.2

10.20

10.80

13.00

14.80

11.00

11.90

13.50

15.90

7.6

7.0

8.9

5.0

84

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Strap Battery Devices – LR4 Series

Strap Battery Devices –

LR4 Series

Features

■ Current ratings from

1.7 A to 14.1 A

■ Voltage: 15 V to 20 V

■ Agency Recognition:

UL, CSA, TÜV

■ Fast time-to-trip

■ Low resistance

Lead Material:

0.125 mm nominal thickness,

quarter-hard nickel

Tape Material:

Polyester

Figure B13

Figure B14

Figure B15

Figure B16

Dimensions (mm)

A

B

C

D

E

F

Part Number

Figure

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

125°C Typical Activation

LR4

LR4-170UF

LR4-190F

LR4-190SF

LR4-260F

LR4-260SF

LR4-380F

LR4-380XF

LR4-450F

LR4-550F

LR4-600F

LR4-600XF

LR4-730F

LR4-880SSF

LR4-900F

LR4-1300SSF

19.0

19.9

20.9

24.0

32.2

24.0

35.0

24.0

40.5

27.1

62.8

45.4

61.5

21.0

22.1

23.1

26.0

35.8

26.0

37.0

26.0

42.7

29.1

65.2

47.6

66.5

0.5

0.6

0.9

0.7

1.0

1.3

3.8

4.9

4.0

5.5

5.3

5.5

4.1

5.5

5.3

4.1

5.2

4.1

10.00

4.6

5.0

6.5

7.5

5.5

7.5

6.7

5.5

6.8

5.5

12.00

6.2

7.5

5.3

5.5

4.1

5.5

5.3

4.1

5.2

4.1

10.00

4.6

5.0

6.5

7.5

5.5

7.5

6.7

5.5

6.8

5.5

12.00

6.2

7.5

2.9

3.9

4.9

3.9

5.9

4.9

5.9

4.9

5.9

3.1

4.1

5.1

4.1

6.1

5.1

6.1

5.1

6.1

B15

B13

B14

B13

B14

B13

B16

B13

B16

4.9

5.5

4.9

5.5

4.9

5.5

6.9

7.5

4.9

5.5

9.9

10.50

7.5

6.9

13.90

6.9

14.50

7.5

13.90

7.9

14.50

8.5

7.9

8.5

9.4

10.00

All specifications subject to change. Consult Tyco Electronics for latest specifications.

85

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Strap Battery Devices – SRP Series

Strap Battery Devices –

SRP Series

Features

■ Current ratings from

1.2 A to 4.2 A

■ Voltage: 15 V to 30 V

■ Agency Recognition:

UL, CSA, TÜV

■ Fast time-to-trip

■ Low resistance

Lead Material:

0.125 mm nominal thickness,

quarter-hard nickel

Tape Material:

Polyester

Figure B17

Figure B18

Figure B19

Dimensions (mm)

A

B

C

D

E

F

Part Number

Figure

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

SRP

SRP120F

SRP120LF

SRP120SF

SRP175F

SRP175LF

SRP175SF

SRP175SSF

SRP200F

SRP350F

SRP420F

19.9

24.9

19.9

20.9

29.9

20.9

21.3

28.4

30.6

22.1

27.1

22.1

23.1

32.1

23.1

23.4

31.8

32.4

0.6

0.5

1.0

1.1

04.9

10.2

13.0

12.9

05.2

11.0

13.5

13.6

5.5

4.1

5.5

4.1

5.0

6.3

5.0

7.5

5.5

7.5

5.5

7.6

8.9

7.5

5.5

10.5

5.5

7.5

12.5

7.5

3.9

4.8

6.0

4.1

5.4

6.6

6.7

B17

B18

B17

B18

B19

B17

4.1

5.5

10.50

4.1

12.50

5.5

4.1

5.5

5.0

7.6

6.3

8.9

5.0

7.5

86

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Surface-Mount Devices – nanoSMDC

Surface-Mount Devices –

nanoSMDC

Features

■ Broadest range of resett-

able devices available in the

industry

■ Current ratings from

0.12 A to 2 A

■ Voltage ratings from

6 V to 48 V

■ Agency Recognition:

UL, CSA, TÜV

■ Fast time-to-trip

■ Low resistance

Terminal Pad Material:

100% matte tin with nickel

underplate

Figure S1

Dimensions (mm)

A

B

C

D

E

F

Part Number

Min.

Figure

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

nanoSMP Series

Size 3216 mm/1206 mils

nanoSMDC012F

nanoSMDC016F

nanoSMDC020F

nanoSMDC035F

nanoSMDC050F/13.2

nanoSMDC075F

nanoSMDC110F

nanoSMDC150F

nanoSMDC200F

3.00

3.40

0.62

0.38

0.28

0.67

0.55

0.68

1.00

0.64

0.48

1.00

0.89

1.25

1.37

1.80

0.25

0.75

0.08

–

S1

All specifications subject to change. Consult Tyco Electronics for latest specifications.

87

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Surface-Mount Devices – microSMD

Surface-Mount Devices –

microSMD

Features

■ Broadest range of resett-

able devices available in the

industry

■ Current ratings from

0.05 A to 1.75 A

■ Voltage ratings from

6 V to 30 V

■ Agency Recognition:

UL, CSA, TÜV

■ Small footprint

■ Fast time-to-trip

■ Low resistance

Terminal Pad Material:

100% matte tin with nickel

underplate

Figure S2

Figure S3

Dimensions (mm)

A

B

C

D

E

F

Part Number

Min.

Figure

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

microSMD Series

Size 3225 mm/1210 mils

microSMD005F

microSMD010F

microSMD035F

microSMD050F

microSMD075F

microSMD110F

microSMD150F

microSMD175F

3.00

3.43

0.50

0.38

0.28

0.51

0.40

0.85

0.62

0.48

1.22

0.76

2.35

2.80

0.25

0.75

0.20

–

S3

S2

88

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Surface-Mount Devices – miniSMDC

Surface-Mount Devices –

miniSMDC

Features

■ Broadest range of resett-

able devices available in the

industry

■ Current ratings from

0.14 A to 2.6 A

■ Voltage ratings from

6 V to 60 V

■ Agency Recognition:

UL, CSA, TÜV

■ Small footprint

■ Fast time-to-trip

■ Low resistance

Terminal Pad Material:

100% matte tin with nickel

underplate

Figure S4

Dimensions (mm)

A

B

C

D

E

F

Part Number

Min.

Figure

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

miniSMDC Series

Size 4532 mm/1812 mils

miniSMDC014F

miniSMDC020F

miniSMDC050F

miniSMDC075F

miniSMDC075F/24

miniSMDC110F

miniSMDC110F/16

miniSMDC110F/24

miniSMDC125F

miniSMDC125F/16

miniSMDC150F

miniSMDC150F/12

miniSMDC150F/24

miniSMDC160F

miniSMDC200F

miniSMDC260F

miniSMDC260F/12

miniSMDC260F/16

4.37

4.73

4.83

4.73

4.83

4.73

4.83

4.73

4.83

4.73

0.635

0.38

0.81

0.38

0.28

0.81

0.28

1.00

0.28

0.51

0.48

0.76

0.89

0.62

1.30

0.62

0.48

1.30

0.48

1.68

0.48

1.22

0.74

1.25

3.07

3.41

0.25

0.95

0.20

–

S4

All specifications subject to change. Consult Tyco Electronics for latest specifications.

89

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Surface-Mount Devices – miniSMDE

Surface-Mount Devices –

miniSMDE

Features

■ Broadest range of resett-

able devices available in the

industry

■ Current Rating: 1.9 A

■ Voltage Rating: 16 V

■ Agency Recognition:

UL, CSA, TÜV

■ Small footprint

■ Fast time-to-trip

■ Low resistance

Terminal Pad Material:

100% matte tin with nickel

underplate

Figure S5

Dimensions (mm)

A

B

C

D

E

F

Part Number

Min.

Figure

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

miniSMDE Series

Size 11550 mm/4420 mils

miniSMDE190F

11.15

11.51

0.33

0.53

4.83

5.33

0.51

1.02

0.38

–

S5

90

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Fast Acting Fuses

Features

Fast-acting fuses help provide overcurrent protection on systems

using DC power sources up to 63 V DC. The fuse’s monolithic,

multilayer design provides the highest hold current in the smallest

footprint, reduces diffusion-related aging, improves product relia-

bility and resilience, and enhances high temperature performance

in a wide range of circuit protection designs. This helps facilitate

the development of more reliable, high-performance consumer

electronics such as laptops, multimedia devices, cell phones, and

other portable electronics.

Material Specifications

Construction Body Material: Ceramic

Termination Material:

Fuse Element:

Silver, Nickel, Tin

Silver

Terminal Strength:

Hanging Test

Typical Electrical

^✱Characteristics^✱

Maximum

^✱Interrupt Ratings^✱

0603: 0.5 kg, 30 seconds;

1206: 1.5 kg, 30 seconds;

0402: Part types meet 2-pound push test

Part

Number

Rated

Current

(A)

Nominal

^†Cold DCR^†

(Ω)

Voltage

Current

(A)

(V_DC

)

0402SFF050F/24

0402SFF075F/24

0402SFF100F/24

0402SFF150F/24

0402SFF200F/24

0402SFF300F/24

0402SFF400F/24

0.50

0.75

1.00

1.50

2.00

3.00

4.00

0.380

0.210

0.120

0.056

0.035

0.021

0.014

Dimensions and Pad Layout

0402 (1005 mm) Fast Acting Surface-Mount Chip Fuses

Shape and Dimensions

Inch (mm)

24

35

Recommended Pad Layout

Inch (mm)

0603SFF050F/32

0603SFF075F/32

0603SFF100F/32

0603SFF150F/32

0603SFF200F/32

0603SFF250F/32

0603SFF300F/32

0603SFF350F/32

0603SFF400F/32

0603SFF500F/32

0603SFF600F/24

0.50

0.75

1.00

1.50

2.00

2.50

3.00

3.50

4.00

5.00

6.00

0.485

0.254

0.131

0.059

0.044

0.032

0.025

0.024

0.018

0.013

0.010

50

35

0603 (1608 mm) Fast Acting Surface-Mount Chip Fuses

32

Shape and Dimensions

Inch (mm)

Recommended Pad Layout

Inch (mm)

24

63

1206SFF050F/63

1206SFF075F/63

1206SFF100F/63

1206SFF150F/63

1206SFF175F/63

1206SFF200F/63

1206SFF250F/32

1206SFF300F/32

1206SFF400F/32

1206SFF500F/32

1206SFF600F/24

1206SFF700F/24

1206SFF800F/24

0.50

0.75

1.00

1.50

1.75

2.00

2.50

3.00

4.00

5.00

6.00

7.00

8.00

0.500

0.330

0.220

0.120

0.100

0.050

0.035

0.031

0.022

0.015

0.013

0.011

0.008

50

1206 (3216 mm) Fast Acting Surface-Mount Chip Fuses

Shape and Dimensions

Inch (mm)

Recommended Pad Layout

Inch (mm)

32

24

45

✱

) Measured at 25 °C

^†) Measured at 10% of rated current

All specifications subject to change. Consult Tyco Electronics for latest specifications.

91

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

Slow Blow Fuses

Features

Industry standard 1206 chip

sizes, high reliability and strong

arc suppression characteristics.

The fuse’s monolithic, multi-

layer design helps provide

some of the highest current

ratings available in the 1206

footprint and enhances high

temperature performance in a

wide range of circuit protection

designs. Designed for DC

power applications of up to

63 V DC such as protection of

power supplies, capacitor filter

banks, LCD backlight inverters,

electric motors and portable

electronics.

Material Specifications

Construction Body Material:

Ceramic

Termination Material:

Silver, Nickel, Tin

Fuse Element: Silver

Terminal Strength:

Hanging Test: 1.5 kg, 30 seconds

Dimensions and Pad Layout

Typical Electrical

^✱Characteristics^✱

Part

Number

1206 (3216mm) Slow Blow Surface-Mount Chip Fuses

Rated

Current

(A)

Nominal

^†Cold DCR^†

(Ω)

Nominal

Voltage

l²t

(V_DC

)

(A²sec)²

Shape and

Dimensions

Inch (mm)

1206SFS100F/63

1206SFS125F/63

1206SFS150F/63

1206SFS200F/63

1206SFS250F/32

1206SFS300F/32

1206SFS350F/32

1206SFS400F/32

1206SFS450F/32

1206SFS500F/32

1206SFS550F/24

1206SFS600F/24

1206SFS700F/24

1206SFS800F/24

1.0

01.25

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

7.0

8.0

0.260

0.150

0.130

0.090

0.050

0.032

0.028

0.022

0.019

0.018

0.014

0.012

0.009

0.008

0.11

0.22

63

0.23

0.63

0.90

1.20

1.60

32

24

2.20

3.60

5.30

6.40

8.50

Recommended

Pad Layout

Inch (mm)

10.000

16.900

✱

) Measured at 10% of rated current and 25 °C

^†) Melting l²t at 0.001 sec clear time

92

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Raychem Circuit Protection Products

Catalog 1654270-2

Revised 8-2007

ESD Protection Devices

Features

Designed for I/O port protection in high-speed data transmission

applications, PESD protection devices shunt ESD away from

sensitive circuitry in electronic devices.

The Raychem PESD protection devices provide exceptionally

low capacitance, and they perform better than other comparable

components in transmission line pulse (TLP) testing, as well as

IEC61000-4-2 testing, especially after multiple hits (up to 1000).

The devices offer a lower trigger voltage and a lower clamping

voltage than typical polymer ESD devices, resulting in improved

protection of sensitive electronic components.

Dimensions

Dimensions (mm)^✱

Height B Terminal Width C

Min. Max. Min. Max.

Part

Number

Length A

Width D

Min.

0.10

Max.

0.30

0.50

Min. Max.

0.45 0.55

0.60 1.00

0402

0603

0.95 1.05

1.40 1.80

0.33 0.43

0.38 0.58

✱

) Rounded off approximation

Dimensions (mm)^✱

Part

Number

Length A

Height B

Terminal Width C

Width D

Width E

Min. Max.

Width F

Min. Max.

Min.

Max.

Min. Max.

1206Q

3.0

3.4

0.4

0.6

0.1

0.3

1.4

1.8

0.2

0.6

0.2

0.6

✱

) Rounded off approximation

Pad Layout

Dimensions (mm)^✱

Part

Number

V Ref.

W Ref.

X Ref.

Y Ref.

Figure

E3

PESD0402Q

PESD0603Q

PESD1206Q

–

0.65 0.05

0.95 0.05

22.0 0.20

0.35 0.05

0.55 0.05

0.50 0.10

0.85 0.05

1.05 0.05

0.80 0.20

–

E3

3.2 0.2

1.0 0.1

E4

Note: Solder Thickness 0.15 to 0.20 mm

✱

) Rounded off approximation

Figure E3

Figure E4

All specifications subject to change. Consult Tyco Electronics for latest specifications.

93

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Engineering Notes

94

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Switches

Catalog 1654270-2

Revised 8-2007

FSM 6 x 6 Series

■ Different Actuator and

Mounting Versions

Technical Features

Style:

6 x 6 mm

Mounting Style:

THT, SMT

Right-Angle Versions:

Available

Low Profile Versions:

Available

Flush Actuator Version:

Available

Actuator Force

Height

(mm)

Product Key

(N)

Mounting

Packaging

Part Number

FSM2JSMATR

FSM4JSMATR

FSM6JSMATR

FSM2JSMAATR

FSM4JSMXLTR

FSM4JSMAATR

FSM6JSMAATR

FSM2JSMLTR

FSM2JSMA

1.6

2.6

0.7

2.6

1.0

1.6

2.6

0.7

2.6

1.0

4.3

5.0

7.0

4.3

5.0

7.0

4.3

5.0

7.0

4.3

5.0

7.0

4.3

3-1437565-0

4-1437565-2

5-1437565-0

2-1437565-9

Different Actuator Styles:

Available

ESD Ground Terminal/

Locating Post:

Optional/No

Tape and Reel

0-1571563-2

0-1571563-4

1-1571563-2

0-1571527-2

2-1437565-7

4-1437565-1

4-1437565-9

2-1437565-8

0-1571563-1

0-1571563-3

1-1571563-1

0-1571527-1

Sealed Versions:

Available

Standard Actuation Force:

1.6 and 2.6 N

SMT

FSM4JSMA

Electrical Endurance:

up to 2,000,000 cycles

FSM6JSMA

FSM2JSMAA

Operating Temperature Range:

–20 °C up to +85 °C

Bulk

FSM4JSMXL

FSM4JSMAA

Dimensions (L x W x H)

Horizontal Version:

6.0 x 6.0 x 4.3 … 17.0 mm

FSM6JSMAA

FSM2JSML

Sealed Version:

FSM, Extended Life, J-Lead

7.6 x 7.6 x 3.3 … 5.0 mm

Bulk

0-1571625-5

0-1571625-6

FSM, J

1.6

2.5

SMT/J

SMT/G

Tape and Reel

Packaging:

Tape and Reel, Bulk

FSM, Extended Life, Gull Wing

Bulk

0-1571626-5

0-1571626-6

FSM, G

1.6

2.5

Tape and Reel

FSM, Extended Life, Gull Wing, Ground Terminal

Bulk

0-1571636-5

0-1571636-6

FSM, G, Grd.T.

1.6

2.5

Tape and Reel

FSM1LP, Low Profile

FSM1LP

1.6

2.6

1.6

2.6

1-1437565-6

1-1437565-7

1-1437565-9

1-1437565-8

3.1

SMT

Bulk

FSM1LPA

FSM1LPTR

Tape and Reel

FSM1LPATR

FSM Sealed Extended Actuator

Bulk

0-1571294-1

0-1571294-2

0-1571294-3

0-1571294-4

4.3

5.0

SMT

Tape and Reel

Bulk

FSM Sealed

1.6

Tape and Reel

FSM Sealed Flush Actuator

FSM Sealed, Fl.

Bulk

0-1571296-1

0-1571296-2

1.6

2.6

3.3

–

SMT

Tape and Reel

FSM Sealed Right-Angle

FSM Sealed RA

Bulk

0-1571407-1

0-1571407-2

Tape and Reel

All specifications subject to change. Consult Tyco Electronics for latest specifications.

95

Products for Mobile Equipment

Switches

Catalog 1654270-2

Revised 8-2007

FSMCT Series

■ Low Profile

Technical Features

Style:

5 x 5 mm

Mounting Style:

SMT

Right-Angle Versions:

No

Low Profile Versions:

No

Flush Actuator Version:

Actuator Force

Height

(mm)

No

Product Key

(N)

Mounting

Packaging

Part Number

Different Actuator Styles:

No

FSMCTTR

1.6

2.6

8-1437565-0

1.5

SMT

Tape and Reel

FSMCTATR

8-1437565-1

ESD Ground Terminal/

Locating Post:

No/No

Sealed Versions:

No

Standard Actuation Force:

1.6 and 2.6 N

Electrical Endurance:

up to 1,000,000 cycles

Operating Temperature Range:

–20 °C up to +85 °C

Dimensions (L x W x H)

Horizontal Version:

5.2 x 5.2 x 1.5 mm

Packaging:

Tape and Reel

96

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Switches

Catalog 1654270-2

Revised 8-2007

FSM 3.5 x 6 Series

■ Small PCB Footprint

Technical Features

Style:

3.5 x 6 mm

Mounting Style:

THT, SMT

Right-Angle Versions:

No

Low Profile Versions:

No

Flush Actuator Version:

Actuator Force

Height

(mm)

Available

Product Key

(N)

Mounting

Packaging

Part Number

Different Actuator Styles:

Available

FSMSM

Bulk

1437566-3

1437566-4

0147873-3

4.3

SMT

FSMSMTR

ESD Ground Terminal/

Locating Post:

No/No

1.8

FSMJM3,5ATR

FSMJM4,3ATR

FSMJM5ATR

3.5

4.3

5.0

Tape and Reel

0147873-2

0147873-1

SMT/J

Sealed Versions:

Available

Standard Actuation Force:

1.3 and 1.8 N

FSM Sealed

5.0

4.3

5.0

SMT

1571298-2

1571299-2

1571299-4

Electrical Endurance:

up to 40,000 cycles

1.3

Tape and Reel

SMT/J

Operating Temperature Range:

–40 °C up to +85 °C

Dimensions (L x W x H)

Horizontal Version:

3.5 x 6.0 x 4.3 … 5.0 mm

Sealed Version:

4.7 x 6.8 x 4.3 … 5.0 mm

Packaging:

Tape and Reel, Bulk

All specifications subject to change. Consult Tyco Electronics for latest specifications.

97

Products for Mobile Equipment

Switches

Catalog 1654270-2

Revised 8-2007

FSM 0.5 mm

■ Ultra Low Profile

Technical Features

Style:

5 x 5 mm

Mounting Style:

SMT

Right-Angle Versions:

No

Low Profile Versions:

Standard

Flush Actuator Version:

Actuator Force

Height

(mm)

Standard

Product Key

(N)

Mounting

Packaging

Tape and Reel

Part Number

Different Actuator Styles:

No

FSM 4.8x4.8x0.5

1.6

0.5

SMT

1825534-1

ESD Ground Terminal/

Locating Post:

No/No

Sealed Versions:

No

Standard Actuation Force:

1.6 N

Electrical Endurance:

up to 500,000 cycles

Operating Temperature Range:

–20 °C up to +70 °C

Dimensions (L x W x H)

Horizontal Version:

4.8 x 4.8 x 0.5 mm

Packaging:

Tape and Reel

98

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Switches

Catalog 1654270-2

Revised 8-2007

Turtle Style

■ Side Actuated Tactile

Technical Features

Style:

Turtle

Mounting Style:

SMT

Right-Angle Versions:

No

Low Profile Versions:

No

Flush Actuator Version:

Actuator Force

Height

(mm)

No

Product Key

(N)

Mounting

Packaging

Part Number

Different Actuator Styles:

No

FSM Turtle

1.6

Bulk

1571262-1

1.8

SMT

FSM Turtle

Tape and Reel

1571262-2

ESD Ground Terminal/

Locating Post:

No/Optional

Sealed Versions:

No

Standard Actuation Force:

1.6 N

Electrical Endurance:

up to 100,000 cycles

Operating Temperature Range:

–20 °C up to +85 °C

Dimensions (L x W x H)

Horizontal Version:

4.5 x 7.5 x 1.8 mm

Packaging:

Tape and Reel, Bulk

All specifications subject to change. Consult Tyco Electronics for latest specifications.

99

Products for Mobile Equipment

Switches

Catalog 1654270-2

Revised 8-2007

CoinKey™

■ Improve the

Human Interface

Technical Features

CoinKey is a one finger operated

key with excellent input and

navigational capabilities.

With its two-ways rotation and

5 press points; left, right, top,

bottom and center, CoinKey is the

ultimate key for multi-application

handheld devices.

Its unique functionality makes it

possible to develop more efficient

and user-friendly menu systems

than with any other navigation

key in the market. We would

be happy to offer opportunity

assessment in that regard.

Documentation

Drawing:

1705448-1

Product Specification:

108-19288

CoinKey is a registered trademark of

100

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Engineering Notes

All specifications subject to change. Consult Tyco Electronics for latest specifications.

101

Products for Mobile Equipment

Labels

Catalog 1654270-2

Revised 8-2007

MP Metalized Polyester Labels

Tyco Electronics MP is a thermal transfer printable metalized

polyester film with a permanent acrylic adhesive, designed for

rating plates and other applications that require a metal look,

such as nameplates, equipment labels, detailed product

information labels and serial number plates.

MP is UL Listed and CSA Certified.

Print performance and durability are reliable when used with

Tyco Electronics’s RHD series ribbon.

Features and Benefits

■ Thermal transfer printable

■ Metalized appearance

■ Ideal for rating plate applications

■ Several die-cut sizes available

■ UL Listed and CSA Certified

Specifications:

Adhesive:

TTDS-074

Part Numbering System

Permanent Acrylic

MP-080080-10-8A

Service Temperature:

–40 °C to +150 °C

✱

Recommended Printer: T308S

✱

Recommended Ribbon: 1330-0607-10

Color

✱

) Alternative printers and ribbons are

available for special applications.

Contact Tyco Electronics for more

information.

Pack Size

Label Height (mm)

Label Width (mm)

Product Family

Ordering Information

102

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Labels

Catalog 1654270-2

Revised 8-2007

MP Metalized Polyester Labels (continued)

Dimensions (mm)

Product

Order Code

Package

Quantity

Labels

Across

Label Width

A

Label Height

B

Horizontal Repeat

C

Vertical Repeat

D

Web Width

E

MP-040040-25-8A

MP-064064-25-8A

MP-080080-10-8A

MP-089047-10-8A

MP-095080-25-8A

MP-095095-10-8A

MP-127111-10-8A

MP-127127-10-8A

MP-165051-25-8A

MP-165102-10-8A

MP-171171-10-8A

MP-178095-10-8A

MP-191064-10-8A

MP-191114-15-8A

MP-203127-10-8A

MP-229064-10-8A

MP-254045-10-8A

MP-254064-10-8A

MP-254097-10-8A

MP-254127-10-8A

MP-254254-10-8A

MP-305047-10-8A

MP-318064-10-8A

MP-318097-10-8A

MP-381064-10-8A

MP-381127-5-8A

MP-381191-5-8A

MP-381381-2.5-8A

MP-381635-5-8A

MP-406254-1.5-8A

MP-445064-10-8A

MP-445102-5-8A

MP-445445-2-8A

MP-478175-5-8A

MP-508064-10-8A

MP-508095-5-8A

MP-508127-5-8A

MP-508254-5-8A

MP-508318-2.5-8A

MP-508508-3-8A

MP-523841-1.5-8A

MP-610419-2.5-8A

MP-699191-5-8A

MP-699254-5-8A

MP-762381-2.5-8A

MP-762508-2.5-8A

MP-762127-1-8A

MP-101508-2.5-8A

MP-101635-2.5-8A

MP-101762-1.8-8A

MP-101101-1.3-8A

MP-101165-0.85-8A

25,000

10,000

25,000

10,000

25,000

10,000

15,000

10,000

05,000

02,500

05,000

01,500

10,000

05,000

02,000

05,000

10,000

05,000

02,500

03,000

01,500

02,500

05,000

02,500

01,000

02,500

01,800

01,300

00,850

20

12

08

05

07

05

04

05

04

03

04

03

02

01

02

01

04.0

06.4

08.0

08.9

09.5

12.7

16.5

17.1

17.8

19.1

20.3

22.9

25.4

30.5

31.8

38.1

40.6

44.5

47.8

50.8

52.3

61.0

69.9

76.2

101.60

04.0

06.4

08.0

04.7

08.0

09.5

11.1

12.7

05.1

10.2

17.1

09.5

06.4

11.4

12.7

06.4

04.6

06.4

09.7

12.7

25.4

04.7

06.4

09.7

06.4

12.7

19.1

38.1

63.5

25.4

06.4

10.2

44.5

17.5

06.4

09.5

12.7

25.4

31.8

50.8

84.1

41.9

19.1

25.4

38.1

50.8

127.00

50.8

63.5

76.2

101.60

165.10

04.0

06.4

09.9

11.4

12.2

11.1

16.8

15.9

17.8

19.1

19.7

19.1

21.6

22.2

22.9

28.6

31.8

27.9

33.0

N/A

44.2

43.2

44.5

40.6

55.9

N/A

07.2

09.5

13.3

07.9

12.7

14.3

15.9

08.3

13.8

20.3

12.7

09.5

14.7

15.9

09.5

08.5

09.5

12.7

16.9

28.6

07.8

09.5

12.7

09.5

15.9

22.2

40.8

66.7

38.1

09.5

12.7

47.6

24.4

09.5

12.7

15.9

28.6

34.9

54.6

88.9

45.5

23.3

28.6

41.3

54.0

129.50

54.6

66.7

79.4

104.80

168.30

86.0

82.2

83.3

60.6

64.3

82.1

86.0

82.6

75.8

99.1

101.80

80.9

89.9

69.5

94.6

86.0

95.3

87.3

87.4

69.5

37.9

37.8

44.5

88.2

87.6

88.9

84.7

102.90

50.4

66.0

56.9

57.2

56.9

57.2

56.9

54.0

58.2

67.3

76.2

82.3

82.6

79.4

104.10

107.70

104.10

104.90

✱

) Note: Standard Format Not Compatible with T200 Printers.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

103

Products for Mobile Equipment

Labels

Catalog 1654270-2

Revised 8-2007

Kapton^®Labels

Tyco Electronics polyimide (Kapton^®) labels are all ideal for high

temperature labeling requirements such as printed circuit boards.

They are suitable for direct wave (bottom side) and IR reflow

(top side) PCB applications. Tyco Electronics Kapton^®labels are

designed to withstand the fluxes, cleaning solvents and molten

solder encountered in the manufacture of printed circuit boards.

They offer excellent contrast for bar code applications.

Tyco Electronics Kapton^®labels are suitable for the harshest

high temperature applications. For reliable print performance

and durability, use with Tyco Electronics’s RHT-45 series ribbon.

Features and Benefits

■ UL Listed: T1K, T2K & TSK

■ Thermal transfer printable

■ High temperature permanent acrylic adhesive

T1K

■ Gloss white topcoat

■ Withstands surface mount board processes on either the top

or bottom side of the board.

Specifications:

Adhesive:

T1K

T2K

TSK

TTDS-034

TTDS-035

TTDS-085

■ Low profile 1 mil film offers polyimide thermal performance

at competitive cost.

■ Ideal for manual apply applications.

Permanent Acrylic

Service Temperature:

T1K¹, T2K², TSK², KTT²

T2Y³

T2K

–40 °C to +260 °C

–40 °C to +232 °C

1 Flash exposure to +472 °C

2 Flash exposure to +538 °C

3 Flash exposure to +316 °C

■ Gloss white topcoat

■ Withstands surface mount board processes on either the top

or bottom side of the board.

■ Ideal for auto apply applications.

Recommended Printer:

T1K, T2K, TSK, T2Y, T2Y, KTT T312S

KTT

✱

■ Matte tan topcoat

✱

Recommended Ribbon:

1330-0619-10

■ Withstands surface mount board processes on either the top

or bottom side of the board.

✱

) Alternative printers and ribbons are

available for special applications.

Contact Tyco Electronics for more

information.

■ Product approved for aerospace/defense applications.

■ Low outgassing

TSK

■ High opacity gloss white topcoat.

■ Withstands surface mount board processes on either the top

or bottom side of the board.

Part Numbering System

■ Deemed to be a static safe product in accordance with

EIA 625, EIA 541. Test methods employed were in accordance

with EOS/ESD S11.11.

T1K-044033-10-9

■ Ideal for auto apply applications.

Color

T2Y

Pack Size

■ High opacity gloss white topcoat.

■ Economic alternative to T1K material.

Label Height (mm)

Label Width (mm)

Product Family

■ Withstands surface mount board processes on either the top or

bottom side of the board – can also be used on the top side of the

board in mixed processes, but it is not recommended for the bottom

side which is directly exposed to the wave solder environment.

104

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Labels

Catalog 1654270-2

Revised 8-2007

Kapton^®Labels (continued)

Ordering Information

Dimensions (mm)

Product

Order Code

Package

Quantity

Labels

Across

Label Width

A

Label Height

B

Horizontal Repeat

C

Vertical Repeat

D

Web Width

E

T1K-044033-10-9

T1K-064064-25-9

T1K-080080-10-9

T1K-095080-25-9

T1K-095095-10-9

T1K-127032-10-9

T1K-127111-10-9

T1K-127127-10-9

T1K-165051-25-9

T1K-171171-10-9

T1K-178095-10-9

T1K-191064-10-9

T1K-229064-10-9

T1K-254045-10-9

T1K-254064-10-9

T1K-254097-10-9

T1K-254127-10-9

T1K-254254-10-9

T1K-305047-10-9

T1K-318064-10-9

T1K-381020-10-9

T1K-381127-5-9

T1K-381381-2.5-9

T1K-445064-10-9

T1K-445102-5-9

T1K-508064-10-9

T1K-508095-5-9

T1K-508127-5-9

10,000

25,000

10,000

25,000

10,000

25,000

10,000

05,000

02,500

10,000

05,000

10,000

05,000

20

12

08

05

07

05

04

05

04

03

02

01

02

01

04.4

06.4

08.0

09.5

12.7

16.5

17.1

17.8

19.1

22.9

25.4

30.5

31.8

38.1

44.5

50.8

3.3

6.4

04.4

06.4

09.9

12.2

11.1

19.1

16.8

15.9

17.8

19.7

19.1

21.6

28.6

31.8

27.9

33.0

N/A

09.5

13.3

12.7

03.2

14.3

15.9

08.3

20.3

12.7

09.5

08.5

09.5

12.7

16.9

28.6

07.8

09.5

10.7

15.9

40.8

09.5

12.7

09.5

12.7

15.9

92.4

82.2

83.3

64.3

82.1

94.9

86.0

82.6

75.8

101.80

80.9

89.9

86.0

95.3

87.3

87.4

69.5

37.9

44.1

88.2

88.9

50.4

56.9

57.2

56.9

8.0

9.5

3.2

11.10

12.70

5.1

17.10

9.5

6.4

4.6

6.4

9.7

12.70

25.40

4.7

6.4

2.0

N/A

12.70

38.10

6.4

44.2

44.5

N/A

10.20

6.4

N/A

9.5

N/A

12.70

N/A

®

✱

) Note: Kapton /Polyimide Labels Not Compatible with T200 Printers.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

105

Products for Mobile Equipment

Labels

Catalog 1654270-2

Revised 8-2007

WP White Polyester Labels

Tyco Electronics WP is a thermal transfer printable white

polyester film with a permanent acrylic adhesive. It is ideal for

bar coding, PCB and component labeling, as well as general

purpose labeling applications that require a high durability white

label. WP is resistant to a variety of solvents while maintaining

print quality.

It is UL Listed and CSA Certified, and print performance

and durability are reliable when used with Tyco Electronics’s

RHD series ribbon.

Features and Benefits

■ Thermal transfer printable

■ Excellent for use in PCB component labeling

■ Ink receptive topcoat

■ Excellent for bar code applications

■ UL Listed and CSA Certified

Specifications:

Adhesive:

TTDS-073

Part Numbering System

Permanent Acrylic

WP-040040-10-9

Service Temperature:

–40 °C to +150 °C

✱

Recommended Printer: T308S

✱

Recommended Ribbon: 1330-0607-10

Color

✱

) Alternative printers and ribbons are

available for special applications.

Contact Tyco Electronics for more

information.

Pack Size

Label Height (mm)

Label Width (mm)

Product Family

Ordering Information

106

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Labels

Catalog 1654270-2

Revised 8-2007

WP White Polyester Labels (continued)

Dimensions (mm)

Product

Order Code

Package

Quantity

Labels

Across

Label Width

A

Label Height

B

Horizontal Repeat

C

Vertical Repeat

D

Web Width

E

WP-040040-25-9

WP-064064-25-9

WP-080080-10-9

WP-089047-10-9

WP-095080-25-9

WP-095095-10-9

WP-127111-10-9

WP-127127-10-9

WP-165051-25-9

WP-165102-10-9

WP-171171-10-9

WP-178095-10-9

WP-191064-10-9

WP-191114-15-9

WP-203127-10-9

WP-229064-10-9

WP-254045-10-9

WP-254064-10-9

WP-254097-10-9

WP-254127-10-9

WP-254254-10-9

WP-305047-10-9

WP-318064-10-9

WP-318097-10-9

WP-381064-10-9

WP-381127-5-9

WP-381191-5-9

WP-381381-2.5-9

WP-381635-5-9

WP-406254-1.5-9

WP-445064-10-9

WP-445102-5-9

WP-445445-2-9

WP-478175-5-9

WP-508064-10-9

WP-508095-5-9

WP-508127-5-9

WP-508254-5-9

WP-508318-2.5-9

WP-508508-3-9

WP-523841-1.5-9

WP-610419-2.5-9

WP-699191-5-9

WP-699254-5-9

WP-762254-5-9

WP-762381-2.5-9

WP-762508-2.5-9

WP-762127-1-9

WP-101508-2.5-9

WP-101635-2.5-9

WP-101762-1.8-9

WP-101101-1.3-9

WP-101165-0.85-9

25,000

10,000

25,000

10,000

25,000

10,000

15,000

10,000

05,000

02,500

05,000

01,500

10,000

05,000

02,000

05,000

10,000

05,000

02,500

03,000

01,500

02,500

05,000

02,500

01,000

02,500

01,800

01,300

00,850

20

12

08

05

07

05

04

05

04

03

04

03

02

01

02

01

04.0

06.4

08.0

08.9

09.5

12.7

16.5

17.1

17.8

19.1

20.3

22.9

25.4

30.5

31.8

38.1

40.6

44.5

47.8

50.8

52.3

61.0

69.9

76.2

101.60

04.0

06.4

08.0

04.7

08.0

09.5

11.1

12.7

05.1

10.2

17.1

09.5

06.4

11.4

12.7

06.4

04.6

06.4

09.7

12.7

25.4

04.7

06.4

09.7

06.4

12.7

19.1

38.1

63.5

25.4

06.4

10.2

44.5

17.5

06.4

09.5

12.7

25.4

31.8

50.8

84.1

41.9

19.1

25.4

38.1

50.8

127.00

50.8

63.5

76.2

101.60

165.10

04.0

06.4

09.9

11.4

12.2

11.1

16.8

15.9

17.8

19.1

19.7

19.1

21.6

22.2

22.9

28.6

31.8

27.9

33.0

N/A

44.2

43.2

44.5

40.6

55.9

N/A

07.2

09.5

13.3

07.9

12.7

14.3

15.9

08.3

13.8

20.3

12.7

09.5

14.7

15.9

09.5

08.5

09.5

12.7

16.9

28.6

07.8

09.5

12.7

09.5

15.9

22.2

40.8

66.7

38.1

09.5

12.7

47.6

24.4

09.5

12.7

15.9

28.6

34.9

54.6

88.9

45.5

23.3

28.6

41.3

54.0

129.50

54.6

66.7

79.40

104.80

168.30

86.0

82.2

83.3

60.6

64.3

82.1

86.0

82.6

75.8

99.1

101.80

80.9

89.9

69.5

94.6

86.0

95.3

87.3

87.4

69.5

37.9

37.8

44.5

88.2

87.6

88.9

84.7

102.90

50.4

66.0

56.9

57.2

56.9

57.2

56.9

54.0

58.2

67.3

76.2

82.3

82.6

79.4

104.10

107.70

104.10

104.90

✱

) Note: Standard Format Not Compatible with T200 Printers.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

107

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Engineering Notes

108

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Numerical Index

Part Number

Page

Part Number

Page

Part Number

Page

Part Number

Page

147873-1

147873-2

147873-3

97

10

41

10

41

7

2-338123-2

2-338123-3

2-338123-4

2-338123-5

2-338123-6

2-338123-7

2-338123-8

2-338123-9

3-338123-0

3-338123-1

3-338123-2

3-338123-3

3-338123-4

3-338123-5

3-338123-6

3-338123-7

3-338123-8

3-338123-9

4-338123-0

338610-1

338966-9

1-338967-2

338970-1

368555-1

368560-1

368565-1

368637-3

440217-1

440217-2

440297-1

440297-2

440297-3

440297-4

440343-1

440423-1

440430-1

440432-1

5-619028-2

619052-1

619061-1

619062-1

619068-1

619072-1

5-619078-2

619196-1

619201-1

619210-1

8

619213-1

619214-1

619217-1

619229-1

619231-1

619238-2

900688-1

900712-1

900795-1

900905-1

900965-1

900971-1

900988-1

38

54

36

54

39

16, 17

7

4-1437565-1

4-1437565-2

4-1437565-9

5-1437565-0

8-1437565-0

8-1437565-1

1437566-3

95

96

97

51

55

51

50

51

54

30

16

25

16

17

25

16

25

16

7

2-292292-4

2-292292-5

2-292292-6

2-292292-7

2-292292-8

2-292292-9

3-292292-0

3-292292-1

292331-1

1437566-4

9-1442000-8

6-1442001-0

6-1442001-3

8-1442001-6

1-1442002-5

6-1442002-7

7-1442002-1

7-1442002-2

7-1442002-3

9-1442002-7

2-1442003-2

3-1442003-2

5-1442003-9

1442004-1

1447009-5

1447009-6

1447009-8

1447360-9

1-1447360-1

1470033-1

1470139-1

1470139-2

1470139-3

1470164-1

1470177-1

1470177-2

1470332-1

1470636-1

1470778-1

1470864-1

1470964-1

1-1483288-9

2-1483288-0

2-1483288-1

2-1483288-2

2-1483288-3

2-1483288-4

2-1483288-5

2-1483288-6

2-1483288-7

292331-2

292331-3

292331-5

1279154-1

1377032-2

1377032-3

1-1377227-9

2-1377227-0

2-1377227-1

2-1377227-2

2-1377227-3

2-1377227-4

2-1377227-5

2-1377227-6

2-1377227-7

2-1377227-8

2-1377227-9

3-1377227-0

3-1377227-1

3-1377227-2

3-1377227-3

3-1377227-4

3-1377227-5

3-1377227-6

3-1377227-7

3-1377227-8

3-1377227-9

4-1377227-0

1377269-2

1437259-6

1-1437565-6

1-1437565-7

1-1437565-8

1-1437565-9

2-1437565-7

2-1437565-8

2-1437565-9

3-1437565-0

2-292373-6

2-292373-7

2-292373-8

2-292373-9

3-292373-0

3-292373-1

3-292373-2

292448-1

8

7

25

21

31

23

27

16

25

16

30

35

34

33

34

33

35

37

36

37

1-338063-9

2-338063-0

2-338063-1

2-338063-2

2-338063-3

2-338063-4

2-338063-5

2-338063-6

2-338063-7

2-338063-8

2-338063-9

3-338063-0

3-338063-1

3-338063-2

3-338063-3

3-338063-4

3-338063-5

3-338063-6

3-338063-7

3-338063-8

3-338063-9

4-338063-0

1-338123-9

2-338123-0

2-338123-1

7

39

30

95

7

8

7

5-619211-1

All specifications subject to change. Consult Tyco Electronics for latest specifications.

109

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Numerical Index

Part Number

Page

Part Number

Page

Part Number

Page

Part Number

Page

2-1483288-8

2-1483288-9

3-1483288-0

3-1483288-1

3-1483288-2

3-1483288-3

3-1483288-4

3-1483288-5

3-1483288-6

3-1483288-7

3-1483288-8

3-1483288-9

4-1483288-0

1-1483437-9

2-1483437-0

2-1483437-1

2-1483437-2

2-1483437-3

2-1483437-4

2-1483437-5

2-1483437-6

2-1483437-7

2-1483437-8

2-1483437-9

3-1483437-0

3-1483437-1

3-1483437-2

3-1483437-3

3-1483437-4

3-1483437-5

3-1483437-6

3-1483437-7

3-1483437-8

3-1483437-9

4-1483437-0

1483596-1

7

1565322-1

1571262-1

1571262-2

1571294-1

1571294-2

1571294-3

1571294-4

1571296-1

1571296-2

1571299-2

1571299-4

1571407-1

1571407-2

1571527-1

1571527-2

1571563-1

1571563-2

1571563-3

1571563-4

1-1571563-1

1-1571563-2

1571598-2

1571625-5

1571625-6

1571626-5

1571626-6

1571636-5

1571636-6

1612493-1

1612534-1

1612537-1

1612633-1

1612634-1

1612681-1

1612898-1

1612901-1

1674162-1

1674319-1

1674432-1

1674783-1

1674787-1

1674977-1

1674977-2

1705030-1

1705058-1

1705130-1

1705254-1

1-1705300-5

30

99

95

97

95

97

95

39

46

22

39

43

25

22

39

22

39

16

39

9

1-1705300-6

1-1705300-7

1-1705300-8

1-1705300-9

2-1705300-0

2-1705300-1

2-1705300-2

2-1705300-3

2-1705300-4

1705336-2

9

1734205-1

1-1734205-1

3-1734205-1

4-1734205-1

1734234-1

1734234-2

1734234-3

1734234-4

1734300-1

1734472-1

1734472-2

1734472-3

1-1734472-1

1-1734472-2

1-1734472-3

1746116-1

1746136-1

1746142-1

1746223-1

1746237-1

1746237-2

1746237-3

1746237-4

1746237-5

1746237-6

1746237-7

1746237-8

1746237-9

1-1746237-0

1-1746237-1

1-1746237-2

1-1746237-3

1-1746237-4

1-1746237-5

1-1746237-6

1-1746237-7

1-1746237-8

1-1746237-9

2-1746237-0

2-1746237-1

2-1746237-2

2-1746237-3

2-1746237-4

1746716-1

1746717-1

1746730-1

1746750-1

1746751-1

18

25

30

25

39

30

42

22

15

22

39

32

99

10

39

12

39

22

39

42

39

22

39

42

25

42

39

30

19

1705448-1

1-1705615-3

1-1705615-4

1-1705615-5

1-1705615-6

1-1705615-7

1-1705615-8

1-1705615-9

2-1705615-0

1705795-1

1-1705813-2

1-1705813-3

1-1705813-4

1-1705813-5

1-1705813-6

1-1705813-7

1-1705813-8

1-1705813-9

1717017-1

1717029-1

1717169-1

1717257-1

1717273-1

1717294-1

1717312-1

1717400-1

1717406-1

7

17

30

39

18

30

1483596-2

1483748-1

1483940-1

1483960-1

1496476-1

1496476-2

1496476-3

1496476-4

1496476-5

1496476-6

1496476-8

1565158-1

1717413-1

1717431-1

1717562-1

1717838-1

1717989-1

1720028-2

1734035-1

1734035-3

1734035-4

1-1734035-1

1-1734035-3

110

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Numerical Index

Part Number

Page

Part Number

Page

Part Number

Page

Part Number

Page

1746773-1

1746931-1

1747103-1

1747124-2

1747129-1

1747314-1

1-1747769-0

1-1747769-2

1-1747769-6

2-1747769-0

2-1747769-2

2-1747769-4

2-1747769-8

3-1747769-0

4-1747769-6

5-1747769-0

5-1747769-4

5-1747769-6

6-1747769-0

7-1747769-0

8-1747769-0

1750516-1

1775012-1

1775055-1

1775059-1

1775067-1

1775204-1

1775250-1

1825534-1

1827000-1

1827034-1

1827349-1

1827465-1

1827541-1

1827546-1

1827674-1

1827674-2

1827674-3

1827674-4

1827674-5

1827674-6

1827674-7

1827674-8

1827674-9

1-1827674-0

1-1827674-1

1-1827674-2

1-1827674-3

39

22

42

10

14

18

25

19

25

16

98

42

25

22

12

23

15

1-1827674-4

1-1827674-5

1-1827674-6

1-1827674-7

1-1827674-8

1-1827674-9

2-1827674-0

2-1827674-1

2-1827674-2

2-1827674-3

2-1827674-4

1827827-1

1827827-2

1827827-3

1827827-4

1827827-5

1827827-6

1827827-7

1827827-8

1827827-9

1-1827827-0

1-1827827-1

1-1827827-2

1-1827827-3

1-1827827-4

1-1827827-5

1-1827827-6

1-1827827-7

1-1827827-8

1-1827827-9

2-1827827-0

2-1827827-1

2-1827827-2

2-1827827-3

2-1827827-4

1827928-1

1857118-1

1857258-1

1857346-1

1857353-1

1857353-2

1857724-4

1871250-3

1871250-4

15

42

13

44

45

17

30

25

14

2-1871274-2

2-1871274-4

2-1871274-8

3-1871274-0

4-1871274-0

4-1871274-6

5-1871274-0

5-1871274-4

5-1871274-6

6-1871274-0

7-1871274-0

8-1871274-0

1-1871275-0

1-1871275-2

1-1871275-6

2-1871275-0

2-1871275-2

2-1871275-4

2-1871275-8

3-1871275-0

4-1871275-0

4-1871275-6

5-1871275-0

5-1871275-4

5-1871275-6

6-1871275-0

7-1871275-0

8-1871275-0

1871406-1

1-1871566-0

1-1871566-2

1-1871566-6

2-1871566-0

2-1871566-2

2-1871566-4

2-1871566-8

3-1871566-0

4-1871566-0

4-1871566-6

5-1871566-0

5-1871566-4

5-1871566-6

6-1871566-0

7-1871566-0

8-1871566-0

1871583-1

14

10

14

25

1871583-4

1871602-1

1871602-2

1871813-1

1871916-1

1903290-1

1903302-1

1939053-1

1939054-1

1981568-1

1981584-1

1981812-1

1981813-1

1981898-1

5338979-1

5338979-2

5338980-1

5338982-1

5338982-2

6337194-1

25

25, 26

42

25

28

25

20

47

11

21

40

1-1871274-0

1-1871274-2

1-1871274-6

2-1871274-0

1871583-2

1871583-3

All specifications subject to change. Consult Tyco Electronics for latest specifications.

111

Products for Mobile Equipment

Catalog 1654270-2

Revised 8-2007

Engineering Notes

112

All specifications subject to change. Consult Tyco Electronics for latest specifications.

Global Contacts

Americas

Argentina – Buenos Aires

Phone: +54-11-4733-2200

Canada – Toronto

Phone: +905-475-6222

Mexico – Mexico City

Phone: +52-55-1106-0800

+01-800-733-8926

United States

Harrisburg, PA

Phone: +1-717-564-0100

Fax:

+54-11-4733-2211

Fax:

+905-474-5520

Product Information Center:

Phone: +905-470-4425

Fax:

+52-55-1106-0901

Fax:

+1-717-986-7575

Brasil – São Paulo

Phone: +55-11-3611-1311

Product Information Center:

Phone: +1-800-522-6752

Fax:

+905-474-5525

Fax:

+55-11-3611-0397

For Latin/South American

Countries not shown

Phone: +54-11-4733-2015

+1-717-986-7575

Colombia – Bogota

Phone: +57-1-231-9398

Troy, MI

Phone: +1-248-273-3359

Fax: +1-248-273-3322

Fax:

+57-1-660-0206

Fax:

+54-11-4733-2083

Asia/Pacific

Australia – Sydney

Japan – Kawasaki, Kanagawa

New Zealand – Auckland

Singapore – Singapore

Phone: +61-2-9554-2600

Phone: +81-44-844-8111

Phone: +64-9-634-4580

Phone: +65-6482-0311

Fax:

+61-2-9502-2556

Fax:

+81-44-812-3207

Fax:

+64-9-634-4586

Fax:

+65-6482-1012

Product Information Center:

Phone: +61-2-9840-8200

Product Information Center:

Phone: +81-44-844-8013

Philippines – Makati City

Phone: +632-848-0171

Taiwan – Taipei

Phone: +886-2-8768-2788

Fax:

+61-2-9634-6188

Fax:

+81-44-812-3200

Fax:

+632-867-8661

Fax:

+886-2-8768-2268

India – Bangalore

Phone: +91-80-285-40800

Korea – Seoul

Phone: +82-2-3415-4500

People’s Republic of China

Hong Kong

Phone: +852-2735-1628

Thailand – Bangkok

Phone: +66-2-955-0500

Fax:

+91-80-285-40820

Fax:

+82-2-3486-3810

Fax:

+66-2-955-0505

Indonesia – Jakarta

Phone: +65-6482-0311

Malaysia – Selangor

Phone: +60-3-7805-3055

Fax:

+852-2735-0243

Vietnam – Ho Chi Minh City

Phone: +84-8-930-5546

Shanghai

Phone: +86-21-2407-1588

Fax:

+65-6482-1012

Fax:

+60-3-7805-3066

Fax:

+84-8-930-3443

+86-21-2407-1599

Europe/Middle East/Africa

Austria – Vienna

Phone: +43-1-905-60-0

France – Cergy-Pontoise Cedex

Phone: +33-1-3420-8888

Lithuania and Latvia

Lithuania – Vilnius

South Africa – Port Elizabeth

Phone: +27-41-503-4500

Fax:

+43-1-905-60-1333

Fax:

+33-1-3420-8600

Phone: +370-5-213-1402

Fax:

+27-41-581-0440

Product Information Center:

Phone: +43-1-905-60-1249

Product Information Center:

Phone: +33-1-3420-8686

Fax:

+370-5-213-1403

Spain – Barcelona

Phone: +34-93-291-0330

Product Information Center:

Phone: +370-5-211-3016

Fax:

+43-1-905-60-1251

Fax:

+33-1-3420-8623

Fax:

+34-93-201-7879

+370-5-213-1403

Belgium – Kessel-Lo

Phone: +32-16-352-300

France Export Divisions –

Cergy-Pontoise Cedex

Phone: +33-1-3420-8808

Sweden – Upplands Väsby

Phone: +46-8-50-72-50-00

Netherlands – ’s-Hertogenbosch

Phone: +31-73-6246-246

Fax:

Product Information Center:

Phone: +31-73-6246-999

Fax:

+32-16-352-352

Fax:

+46-8-50-72-50-01

Fax:

+33-1-3420-8300

+31-73-6212-365

Bulgaria – Sofia

Phone: +359-2-971-2152

Switzerland – Steinach

Phone: +41-71-447-0447

Germany – Bensheim

Phone: +49-6251-133-0

Fax:

+359-2-971-2153

+31-73-6246-998

Fax:

+41-71-447-0444

Fax:

+49-6251-133-1600

Czech Republic and Slovakia

Czech Republic – Kurim

Phone: +420-541-162-111

Product Information Center:

Phone: +49-6251-133-1999

Norway – Nesbru

Phone: +47-66-77-88-50

Fax:

Turkey – Istanbul

Phone: +90-212-281-8181-83

+90-212-282-5130/5430

Fax:

+49-6251-133-1988

+47-66-77-88-55

Fax:

+420-541-162-223

Fax:

+90-212-281-8184

Product Information Center:

Greece – Athens

Poland – Warsaw

Phone: +420-541-162-113

Phone: +30-210-9370-396/397

Phone: +48-22-4576-700

Ukraine – Kiev

Phone: +380-44-206-2265

Fax:

+420-541-162-132

Fax:

+30-210-9370-655

Fax:

+48-22-4576-720

Product Information Center:

Phone: +48-22-4576-704

Fax:

+380-44-206-2264

Denmark – Glostrup

Phone: +45-43-48-04-00

Hungary – Budapest

Phone: +36-1-289-1000

Product Information Center:

Phone: +380-44-206-2265

Fax:

+48-22-4576-720

Fax:

+45-43-44-14-14

Fax:

+36-1-289-1010

Fax:

+380-44-206-2264

Product Information Center:

Phone: +36-1-289-1016

Romania – Bucharest

Phone: +40-21-311-3479/3596

Egypt – Cairo

Phone: +202-419-2334

United Kingdom –

Stanmore, Middlesex

Phone: +44-8706-080208

Fax:

+36-1-289-1017

Fax:

+40-21-312-0574

Fax:

+202-417-7647

Ireland – Dublin

Phone: +353-1-866-5612

Russia – Moscow

Phone: +7-495-790-7902

Estonia – Tartu

Phone: +372-5138-274

Fax:

+44-208-954-6234

Product Information Center:

Freephone (UK only):

+0800-267-666

Fax:

+353-1-866-5714

Fax:

+7-495-721-1893

Fax:

+372-7400-779

Product Information Center:

Phone: +7-495-790-7902-502

Israel – Petach-Tikva

Phone: +972-3-929-0999

Finland – Helsinki

Phone: +358-95-12-34-20

Phone: +44-8706-080208

Fax:

+7-495-721-1893

Fax:

+972-3-919-1088

Fax:

+44-208-420-8095

Fax:

+358-95-12-34-250

Russia – St. Petersburg

Phone: +7-812-718-8192

Italy – Collegno (Torino)

Phone: +39-011-4012-111

Fax:

+7-812-718-8193

Fax:

+39-011-4031-116

Product Information Center:

Slovenia – Ljubljana

Phone: +39-011-4012-428

Phone: +386-1561-3270

Fax:

+39-011-40-287-428

Fax:

+386-1561-3240

www.tycoelectronics.com

Tyco Electronics AMP GmbH

AMPèrestr. 12–14

64625 Bensheim / Germany

Phone: +49-(0)6251-133-0

Fax:

+49-(0)6251-133-1600

www.tycoelectronics.com

AMP, ELASTIBOOT, KAPTON, LAMFRAME,

M/A-COM, RAYCHEM, STAX, TE Logo and

Tyco Electronics are trademarks

1654270-2 Revised 8-2007 5M ST


型号：	WP-381381-2.5-9
厂家：	Tyco Electronics
描述：	Products for Mobile Equipment 产品适用于移动设备
文件：	总116页 (文件大小：7864K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

WP-381381-2.5-9 [MACOM]

相关型号：

WP-381635-5-9

WP-406254-1.5-9

WP-445064-10-9

WP-445102-5-9

WP-445445-2-9

WP-4532-120

WP-4532-150

WP-4532-200

WP-4532-230

WP-4532-300

WP-4532-350

WP-4532-400