MTG7-001L-XBD00-RO-0901 [MARKTECH]

Cree XB-D Color Series on Board;
MTG7-001L-XBD00-RO-0901
型号: MTG7-001L-XBD00-RO-0901
厂家: MARKTECH CORPORATE    MARKTECH CORPORATE
描述:

Cree XB-D Color Series on Board

文件: 总2页 (文件大小:88K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Cree XB-D Color Series on Board  
Cree XB-D Color Series  
Cree XLamp XB-D color LEDs extend the double lumens-per-dollar performance of  
the XB package to color LEDs, delivering up to 40% higher maximum light output  
than XP-E color LEDs. The combination of performance and small size of XB-D  
color LEDs enable better color mixing and lower system cost.  
FEATURES  
APPLICATIONS  
> Cree's smallest lighting class LED: 2.45 x 2.45 mm  
> 1A Maximum Drive Current  
> Non-Directional  
> Directional  
> Wide viewing angle: 115°(white) to 140° (red)  
> Electrically Neutral Thermal Path  
> Downlight  
> Consumer Portable  
FLUX CHARACTERISTICS @ 85°C  
COLOR  
Blue  
Green  
Red-Orange  
Red  
DWL (nm)  
465-485  
520-535  
610-620  
620-630  
KIT USED  
0Z01  
MIN.FLUX (LM) @350MA  
35.2  
93.9  
80.6  
67.2  
0B01  
O901  
O701  
CHARACTERISTICS  
UNIT  
°C/W  
°C/W  
°C/W  
°C/W  
degrees  
degrees  
degrees  
mV/°C  
mV/°C  
mV/°C  
MINIMUM  
TYPICAL MAXIMUM  
Thermal resistance, junction to solder point - white, royal blue, blue  
Thermal resistance, junction to solder point - green  
Thermal resistance, junction to solder point - amber  
Thermal resistance, junction to solder point - red-orange, red  
Viewing angle (FWHM) - white  
Viewing angle (FWHM) - royal blue, blue, green  
Viewing angle (FWHM) - amber, red-orange, red  
Temperature coefficient of voltage - white  
Temperature coefficient of voltage - royal blue, blue, green  
Temperature coefficient of voltage - amber, red-orange, red  
ESD classification (HBM per Mil-Std-883D)  
DC forward current  
6.5  
11  
7
5
115  
135  
140  
-2.5  
-3.3  
-2  
Class 2  
1000  
-5  
mA  
V
Reverse voltage  
Forward voltage (@ 350 mA, 85 °C) - white  
Forward voltage (@ 350 mA, 25 °C) - royal blue, blue  
Forward voltage (@ 350 mA, 25 °C) - green  
Forward voltage (@ 350 mA, 25 °C) - amber, red-orange, red  
LED junction temperature  
V
V
V
V
2.9  
3.1  
3.3  
3.5  
3.7  
3.9  
2.6  
150  
2.25  
°C  
It is highly recommended for the user to review the CREE XBD Series page for additional and most recent technical data at:  
http://www.cree.com/led-components-and-modules/products/xlamp/discrete-directional/xlamp-xbd  
Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com  
TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: info@marktechopto.com  
Cree XB-D Color Series on Board  
* Exceeding maximum ratings may damage the LED and cause potential safety hazards.  
* Elevated operating temperatures can be expected to negatively impact the service life (lumen output)  
* All data is related to entire assembly. Data reflects statistical mean values. Actual data may differ depending on variances  
in the manufacturing process.  
* End users need to take into account the lumen depreciation as the temperature rises with various thermal solutions  
installed.  
Note 1: Using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant  
change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are  
within the  
absolute maximum ratings.  
Note 2: The thermal resistance from the LED junction to ambient temperature, Rth(j-a), should be kept below 10°C/W so that  
the LED is not exposed to a condition beyond the absolute maximum ratings.  
Note 3: The temperature of the LED assembly must be measured at the TC-point according to EN60598-1 in a thermally  
constant status with a temperature sensor or a temperature sensitive label.  
Hardware (not included)  
> Mount with #4 Machine Screws.  
> 16AWG Maximum Wire Gauge.  
> Use only with constant current power supplies.  
PCB Fabrication  
> Layer Count: 1  
> Core Material: 6061-T6 Aluminum  
> Single Layer Copper Weight: 1oz  
> Solder Mask: White  
> Finishing Plating: Pb Free HASL  
Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com  
TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: info@marktechopto.com  

相关型号:

MTG7-001L-XML00-RGBW-BC02

Cree XM-L Color Series on Board
MARKTECH

MTG7-001L-XML00-RGBW-BCB1

Cree XM-L Color Series on Board
MARKTECH

MTG7-002S-MLB00-CW-0WA1

Cree ML-B White Series on Linear Board
MARKTECH

MTG7-002S-MLB00-NW-0VE5

Cree ML-B White Series on Linear Board
MARKTECH

MTG7-002S-MLB00-WR-0VZ7

Cree ML-B White Series on Linear Board
MARKTECH

MTG7-002S-MLC00-CW-00DZ

LED MCPCB LINEAR COOL 5000K ML-C
MARKTECH

MTG7-002S-MLC00-WR-0XE7

LED MCPCB LINEAR WARM 3000K ML-C
MARKTECH

MTG7-002S-MLE00-AM-0001

LED MCPCB LINEAR AMBER ML-E
MARKTECH

MTG7-002S-MLE00-BL-0T01

CREE ML-E ON LINEAR BRD BLUE
MARKTECH

MTG7-002S-MLE00-CW-03E3

CREE ML-E ON LINEAR BRD WHT
MARKTECH

MTG7-002S-MLE00-NW-03E5

CREE ML-E ON LINEAR BRD WHITE
MARKTECH

MTG7-002S-MLE00-RD-0V01

CREE ML-E ON LINEAR BRD RED
MARKTECH