01-206-532-23-38 [MARL]
Single Color LED, Green, Water Clear, T-1 3/4, 4.9mm, ROHS COMPLIANT PACKAGE-1;型号: | 01-206-532-23-38 |
厂家: | MARL INTERNATIONAL LIMITED |
描述: | Single Color LED, Green, Water Clear, T-1 3/4, 4.9mm, ROHS COMPLIANT PACKAGE-1 |
文件: | 总3页 (文件大小:189K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FEATURES
FILAMENT REPLACEMENT LEDs - T1¾
206 SERIES
PACK QUANTITY = 20 PIECES
l
l
l
l
Direct replacement for T1¾ Midget Flange SX6s
Reverse polarity options available
Centre contact Anode as standard
Fit and forget reliability
l
Warm White LEDs may be used behind coloured lens
as a true replacement for a filament lamp
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE
DC
CURRENT
DC
LUMINOUS
INTENSITY
lv@20mA
WAVE
LENGTH
λp
OPERATING
TEMP
STORAGE
TEMP
Vopr
lopr
Topr
Tstg
HIGH INTENSITY
01-206-997-21-38 Cool White
01-206-521-23-38 Yellow
01-206-532-23-38 Green
01-206-997-23-38 Cool White
UNITS
Water Clear
Water Clear
Water Clear
Water Clear
12
20
20
20
20
mA
14000
16000
23000
14000
mcd
*see below
591
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
0C
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
0C
Yes
Yes
Yes
Yes
24-28
24-28
24-28
Vdc
527
*see below
nm
Please note that this product is also available in different voltages. Contact our sales
department for further details.
997F-C *Typical emission colour cool white
x
0.245
0.361
0.356
0.264
y
0.229
0.385
0.351
0.220
^ = Products must be derated according to the derating information. Each derating graph refers to
specific LEDs. Appropriate LED numbers shown. - Refer to page 3.
Intensities (lv) and colour shades of white
(x,y co-ordinates) may vary between LEDs
within a batch.
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
•
•
Telephone +44 (0)1229 582430
Fax: +44 (0)1229 585155
•
•
BS EN ISO 9001:2000
Approved Manufacturer
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
Page 1 of
3
© MARL INTERNATIONAL LTD 2008 : DS 026/08 Issue 1
SAMPLES AVAILABLE
206 Series
Green dot on base of product signifies centre contact cathode -ve.
Dimensions in mm (Typical)
Not to scale
Colour dot on LED denotes LED colour.
TECHNICAL INFORMATION
Lamp Base Style
Series
206
Metric Equivalent (mm)
Maximum Power Dissipation (mW)
500
Midget Flange T1¾ SX6s
6
DESIGN CONSIDERATIONS
Single-Chip LEDs
All devices feature water clear high intensity LEDs as standard. The single chip LED devices have been modified by the removal of the domed
portion of the encapsulation (flat-topped) to provide even illumination of switches and annunciators. Non flat topped versions are also available,
please contact the sales department for details.
Product Evaluation
Filament Replacement LEDs have been specifically designed to meet the primary objective of providing improved reliability. As this product range
is suitable for both new-build and retro-fit, (sometimes in very old systems), a wide range of illuminated push button switches and lamp holders
can be encountered. Due to subjectivity, evaluation of the LED type is recommended, (samples of all standard models are available). Care should
be taken to correctly simulate operating ambient light conditions to ensure that the correct device has been selected to maximise viewing
characteristics such as viewing angle, colour compatibility and on/off contrast ratio.
Electro-static Discharge (ESD)
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of possible situations is
very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to
these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that
precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static
sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the
wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing
and despatch. We recommend all users of LED based products follow the guidelines of BS 100015.
Power de-rating
The forward voltage/current value of an LED is dependant upon the ambient temperature of the environment in which it is operated. Therefore,
care must be taken to operate the LED at the correct voltage/current values, depending upon the ambient temperature. Consequently, a
recommendation regarding operating voltages and currents is given in order to address these temperature effects. This recommendation is
termed ‘de-rating’.
It is usual for forward voltages and currents to be specified for ambient temperature of 25°C. However, because the values of these qualities vary
with temperature, Marl should be contacted if the device is to be operated at a temperature significantly higher than 25°C.
Marl accept no liability for any product that is operated higher than the stated voltage.
Note:
All luminous intensity figures refer to the unmodified discrete LED.
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
Fax: +44 (0)1229 585155
•
•
Telephone +44 (0)1229 582430
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as
a
representation
BS EN ISO 9001:2000
Approved Manufacturer
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
©
MARL INTERNATIONAL LTD 2008
:
DS 026/08 Issue
1
SAMPLES AVAILABLE
Page
2
of
3
DERATING INFORMATION
532 & 997
521
206 Series
Part numbers also available in the 206 Series:
PART NO.
COLOUR
VOLTAGE
Vopr
01-206-997-22-38
UNITS
Cool White
24Vdc
These are customer specific and specially created part numbers. If you require more information or
specific part not detailed in the above list please contact sales for further information.
a
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
Fax: +44 (0)1229 585155
•
•
Telephone +44 (0)1229 582430
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as
a
representation
BS EN ISO 9001:2000
Approved Manufacturer
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
©
MARL INTERNATIONAL LTD 2008
:
DS 026/08 Issue
1
SAMPLES AVAILABLE
Page
3
of
3
相关型号:
01-206-997-23-38
Single Color LED, Cool White, Water Clear, T-1 3/4, 4.9mm, ROHS COMPLIANT PACKAGE-1
MARL
01-208-997-23-38
Single Color LED, Cool White, Diffused, T-1 3/4, 4.9mm, ROHS COMPLIANT PACKAGE-2
MARL
01-211-997-21-38
Single Color LED, Cool White, Water Clear, T-1 3/4, 4.9mm, ROHS COMPLIANT PACKAGE-1
MARL
©2020 ICPDF网 联系我们和版权申明