103-305-01 概述
PCB MOUNTING LEDs - Ø 3mm 印刷电路板安装LED灯 - Ø 3毫米 发光二极管 可见光 LED
103-305-01 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | Reach Compliance Code: | compliant |
HTS代码: | 8541.40.20.00 | 风险等级: | 1.76 |
颜色: | RED | 颜色@波长: | Red |
配置: | SINGLE | 最大正向电流: | 0.002 A |
透镜类型: | DIFFUSED | 标称发光强度: | 35.0 mcd |
安装特点: | RADIAL MOUNT | 功能数量: | 1 |
端子数量: | 2 | 最高工作温度: | 80 °C |
最低工作温度: | -40 °C | 光电设备类型: | SINGLE COLOR LED |
总高度: | 6.2 mm | 包装方法: | BULK |
峰值波长: | 625 nm | 形状: | ROUND |
尺寸: | 3 mm | 子类别: | Visible LEDs |
表面贴装: | NO | T代码: | T-1 |
端子节距: | 2.54 mm | 视角: | 30 deg |
Base Number Matches: | 1 |
103-305-01 数据手册
通过下载103-305-01数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载FEATURES
PCB MOUNTING LEDs - Ø 3mm
l
l
l
l
l
l
Material conforms to UL94 V-O flammability ratings
Low current versions available
103 SERIES
PACK QUANTITY = 250 PIECES
Reverse polarity options available
Customised lead lengths available
Product illustrated 103-305-04
Typically available ex stock
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure up to = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE
DC
CURRENT
DC
LUMINOUS
INTENSITY
lv@20mA
WAVE
LENGTH
λp
OPERATING
TEMP
STORAGE
TEMP
Vopr
lopr
Topr
Tstg
STANDARD INTENSITY
103-305-04
103-311-04
103-314-04
103-330-04
103-381-20
103-382-20
103-383-20
UNITS
Red
Colour Diffused
Colour Diffused
Colour Diffused
White Diffused
Colour Diffused
Colour Diffused
Colour Diffused
2.0*
2.1*
2.2*
2.0/2.2*
5
20
40
627
-40 ~ +85^
-40 ~ +85^
-40 ~ +85^
-40 ~ +85^
-40 ~ +70
-40 ~ +70
-40 ~ +70
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
-40 ~ +85
0C
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yellow
Green
Red/Green
Red
20
30
590
20
40
565
20
20/16
20@13mA
15@13mA
627/565
627
13
Yellow
Green
5
13
590
5
11.5
mA
20@11.5mA 565
Vdc
mcd
nm
0C
* = Voltage DC for 20mA product is Vf@20mA, not Vopr
^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Refer to page 3.
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
Fax: +44 (0)1229 585155
•
•
Telephone +44 (0)1229 582430
•
•
BS EN ISO 9001:2000
Approved Manufacturer
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
Page 1 of
3
© MARL INTERNATIONAL LTD 2008 : DS 050/07 Issue 3
SAMPLES AVAILABLE
103 Series
4.0
2.5
5.2
0.5 Sq
2.54
5.0
Dimensions in mm (Typical)
Not to scale
Housing Material
Polycarbonate
This material offers UL94 V-0 flame retardancy* and a high impact strength. This material has a melt point of 290-340°C and is suitable for use in
the majority of automatic soldering processes.
*Material test thickness 1.6mm
LEDs
LED Polarity
Anode identification is shown in the dimensional diagram. The long lead of a non-cropped unit can also be used to help identify the anode. For
the 2 pin Bi-colour units the standard colour configuration is red anode to the ‘+’ sign.
Reverse Polarity
This is offered on all PCB units, with the exception of the 125 series, if requested to help overcome the problem of systems with reverse polarity
connections. Multiple units can also be supplied in reverse polarity but not with mixed polarities. The 2 pin and 3 pin Bi-colours can be supplied in
reverse colour configuration.
Lead Cropping
Should lead cropping be required Marl offer two standard lengths, either by request or by adding one of the following codes to the end of the part
number:-
-24 = 3mm
-26 = 5mm (E.g 103-305-04-26)
Other non-standard lead lengths are available on request.
Bi-colour
2 Pin Operation
To acheive the second colour for a 2 pin Bi-colour unit the supply must be reversed, standard colour configuration for these units is red anode to
the ‘+’ sign.
Electro-static Discharge (ESD)
Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is
very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to
these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that
precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static
sensitive devices, changes in manufacturing technology and materials used to produce higher intensityproducts over a large range of the
wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing
and despatch. We recommend all users of LED based products follow the guidelines of BS 100015.
Note:
All luminous intensity figures refer to the unmodified discrete LED.
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
Fax: +44 (0)1229 585155
•
•
Telephone +44 (0)1229 582430
•
•
BS EN ISO 9001:2000
Approved Manufacturer
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
Page 2 of
3
© MARL INTERNATIONAL LTD 2008 : DS 050/07 Issue 3
SAMPLES AVAILABLE
103 Series
305
&
311
314
330
ALSO AVAILABLE
Part numbers also available in the 103 Series:
PART NO.
COLOUR
VOLTAGE DC
(Vdc) Vopr
103-000-01-54
103-000-04-54
103-305-01
Blue
2mA
Blue
20mA
2mA
Red
103-305-04-05
103-305-04-24
103-305-13
Red
20mA
20mA
20mA RP
2mA
Red
Red
103-311-01
Yellow
103-311-04-05
103-311-04-24
103-311-13
Yellow
20mA
20mA
20mA RP
2mA
Yellow
Yellow
103-314-01
Green
103-314-04-05
103-314-04-24
103-314-04-26
103-314-13
Green
20mA
20mA
20mA
20mA RP
20mA
2mA
Green
Green
Green
103-326-04
Blue
103-330-01
Red/Green Bi-colour
Red/Green Bi-colour
Red/Green Bi-colour
Red/Green Bi-colour
Red/Yellow Bi-colour
Green/Yellow Bi-colour
Green/Yellow Bi-colour
Blue
103-330-04-05
103-330-04-24
103-330-13
20mA
20mA
20mA RP
20mA
20mA
20mA
20mA
20mA
5/6 Vdc RP
103-331-04
103-332-04
103-332-04-25
103-336-04
The products listed above illustrate all of the options available to order.
These products may have custom modifications that alter their operation
beyond the generic information contained within this datasheet. Please
contact sales for further information.
103-337-04
Blue/Green Bi-colour
Yellow
103-382-30
UNITS
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
Fax: +44 (0)1229 585155
•
•
Telephone +44 (0)1229 582430
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
BS EN ISO 9001:2000
Approved Manufacturer
Page 3 of
3
© MARL INTERNATIONAL LTD 2008 : DS 050/07 Issue 3
SAMPLES AVAILABLE
103-305-01 替代型号
型号 | 制造商 | 描述 | 替代类型 | 文档 |
113-305-01 | MARL | Single Color LED, Red, Diffused, T-1, 3mm, | 类似代替 |
103-305-01 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
103-305-01-24 | MARL | Single Color LED, Red, 3mm | 获取价格 | |
103-305-01-26 | MARL | Single Color LED, Red, 3mm | 获取价格 | |
103-305-04 | MARL | PCB MOUNTING LEDs - Ø 3mm | 获取价格 | |
103-305-04-05 | MARL | PCB MOUNTING LEDs - Ø 3mm | 获取价格 | |
103-305-04-24 | MARL | PCB MOUNTING LEDs - Ø 3mm | 获取价格 | |
103-305-04-26 | MARL | Single Color LED, Red, 3mm | 获取价格 | |
103-305-04_13 | MARL | pcb led indicators | 获取价格 | |
103-305-13 | MARL | PCB MOUNTING LEDs - Ø 3mm | 获取价格 | |
103-3101-05-103 | DIALIGHT | LED Mounting Hardware | 获取价格 | |
103-311-01 | MARL | PCB MOUNTING LEDs - Ø 3mm | 获取价格 |
103-305-01 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6