215-501-22 [MARL]

Single Color LED, Red, Water Clear, T-1 3/4, 4.8mm,;


型号：	215-501-22
厂家：	MARL INTERNATIONAL LIMITED
描述：	Single Color LED, Red, Water Clear, T-1 3/4, 4.8mm,
文件：	总4页 (文件大小：221K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

215 RS series

features

• Direct replacement for T3 ¼ Bayonet Automobile Cap

• Flat topped for enhanced, even illumination of large lens areas

• Reverse polarity options available

• Ideal for industrial pushbutton switches and annunciator panels

• Centre contact Anode as standard

• Pack Quantity = 20 Pieces

specifications

Ordering information and typical characteristics (Ta = 25°C)

Current Luminous

Wave

Length

(nm)

Call

525

Operating

Temp.

(°C)

Storage

Temp.

(°C)

Call

RS Part

Number

Marl Part

Number

Voltage

Vac/dc

De-rating

Graphs

Colour

(mA)

Intensity

(mcd)

Call

2388071

2388122

2388188

2829645

2829702

2969737

2388093

2388144

2388201

2829673

2969759

2388087

2388138

2388194

2829667

2829724

2969743

2388100

2388150

2829689

469844

215-501-21-38

215-501-22-38

215-501-23-38

215-501-25-38

215-501-75-38

215-501-76-38

215-521-21-38

215-521-22-38

215-521-23-38

215-521-25-38

215-521-76-38

215-532-21-38

215-532-22-38

215-532-23-38

215-532-25-38

215-532-75-38

215-532-76-38

215-930-21-38

215-930-22-38

215-930-25-38

215-993-21-38

215-993-22-38

215-993-23-38

215-997-21-38

215-997-22-38

215-997-25-38

215-997-48-38

215-997-75-38

215-997-76-38

Red

12 Vdc

24 Vdc

Call

-30 - +85

Call

24-28 Vdc

110 Vdc

110 Vac

230 Vac

12 Vdc

3.5

Call

Red

Yellow

Green

Blue

Warm White

White

Call

24 Vdc

24-28 Vdc

110 Vdc

230 Vac

12 Vdc

Call

3.5

1240

252

-40 - +100

Call

24 Vdc

24-28 Vdc

110 Vdc

110 Vac

230 Vac

12 Vdc

24 Vdc

110 Vdc

12 Vdc

24 Vdc

24-28 Vdc

12 Vdc

24 Vdc

110 Vdc

60 Vdc

525

Call

252

Call

850

785

* See pg.2

-30 - +85

-40 - +100

469935

469939

2830099

2830106

2829695

2829639

2829752

2969771

White

785

110 Vac

230 Vac

3.5

785

White

^ = Voltage for 20mA product is Vf at 20mA, not Vopr

- Products must be de-rated according to the de-rating information. Each de-rating graph refers to

specific LEDs. Please refer to graphs on page 2.

- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.

providing information, which must not be copied or released to

a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

BS EN ISO 9001:2008

approved manufacturer

marl international limited - dsn 215 RS - version 2014-04-29-173242

page 1 of 4

215 RS series

technical data

20.50

5.50

Green dot base of product indicates centre contact

cathode -ve. Colour dot on sleeve denotes LED colour.

Dimensions in mm (typical)

Not to scale

Metric Equivalent

(mm)

Max. Power Dissipation

(mW)

Lamp Base Style

Series

T3 ¼ Bayonet Automobile Cap

215

625

899F

*Typical emission colour Warm White

997F

*Typical emission colour White

0.4255

0.4000

0.4390

0.4310

0.4680

0.4385

0.4519

0.4086

0.4255

0.4000

0.4390

0.4310

0.4680

0.4385

0.4519

0.4086

Intensities (Iv) and colour shades of white (x,y co-ordinates) may vary between leds within a batch

de-rating information

Derating Graph B

Derating Graph I

Derating Graph U

8.5

0.0

20.0

40.0

60.0

80.0 100.0

0.0

20.0

40.0

60.0

80.0 100.0

0.0

20.0

40.0

60.0

80.0 100.0

Ambient Temperature Ta (°C)

providing information, which must not be copied or released to third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

BS EN ISO 9001:2008

approved manufacturer

marl international limited - dsn 215 RS - version 2014-04-29-173242

page 2 of 4

215 RS series

also available

Part numbers also available in the 215 series:

Part

Voltage

Vopr

Part

Voltage

Vopr

Colour

Number

215-000-04-50

215-501-00-50

215-501-00-51

215-501-04-38

215-501-20

Red+Blue

Red

Yellow

Red

Green

Yellow

Blue

20 mA dc

32 Vac

150 Vdc

20 mA dc

5/6 Vdc

12 Vdc

48 Vdc

15 Vdc

125 Vdc

24 Vac 50 Hz

125 Vac 50 Hz

60 Vac 50 Hz

130 Vac

215-997-24-38

215-997-27-38

215-997-32-38

215-997-33-38

215-997-35-38

215-997-50-38

215-997-55-38

215-997-70-38

215-997-75

White

48 Vdc

220 Vdc

24 Vdc RP

28 Vdc RP

110 Vdc RP

125 Vdc

215-501-21

215-501-24-38

215-501-42-38

215-501-50-38

215-501-72-38

215-501-77-38

215-501-80-38

215-501-84-38

215-521-00-53

215-521-22-50

215-521-22-51

215-521-31-38

215-521-33-38

215-521-75

215-521-75-38

215-521-84-38

215-527-00-50

215-532-00-51

215-532-04-38

215-532-22

130 Vdc

5/6 Vac 50 Hz

110 Vac 50 Hz

230 Vac 50 Hz

125 Vac 50 Hz

130 Vac

215-997-76

215-997-77-38

215-997-84-38

215-998-25-38

110 Vdc

160 Vdc

24 Vdc

12 Vdc RP

28 Vdc RP

110 Vac 50 Hz

130 Vac

1.77 Vdc

150 Vdc

20 mA dc

24 Vdc

48 Vdc

125 Vdc

125 Vac 50 Hz

130 Vac

215-532-24-38

215-532-50-38

215-532-77-38

215-532-84-38

215-906-22-38

215-930-20-38

215-930-21

24 Vdc

5/6 Vdc

12 Vdc

Blue

215-930-23-38

215-930-32-38

215-930-37-38

215-930-41-38

215-930-45-38

215-930-48-38

215-930-75-38

215-993-04-38

215-993-25-38

215-993-32-38

215-993-45-38

215-993-55-38

215-993-75-38

215-993-76-38

215-993-84-38

215-995-22-38

215-997-00-53

215-997-04-38

215-997-22

Blue

28 Vdc

24 Vdc RP

60 Vdc RP

8 Vdc

30 Vdc

60 Vdc

110 Vac 50 Hz

20 mA dc

110 Vdc

24 Vdc RP

30 Vdc

Warm White

White

130 Vdc

110 Vac 50 Hz

230 Vac 50 Hz

130 Vac

24 Vdc

150 Vdc

20 mA dc

24 Vdc

White

215-997-23-38

White

28 Vdc

RP = Reverse Polarity

providing information, which must not be copied or released to third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

BS EN ISO 9001:2008

approved manufacturer

marl international limited - dsn 215 RS - version 2014-04-29-173242

page 3 of 4

215 RS series

Single-Chip LEDs

design considerations

All devices feature water clear high intensity LEDs as standard. In devices where discrete LEDs are used, the single

chip LED devices have been modified by the removal of the domed portion of the encapsulation (flat-topped) to provide

even illumination of switches and annunciators. Non flat topped versions are also available.

Flat-topping does not apply to devices using surface-mounted device (SMD) LEDs.

Product Evaluation

Filament replacement LEDs have been specifically designed to meet the primary objective of providing improved reliability. As

this product range is suitable for both new-build and retro-fit, (sometimes in very old systems), a wide range of illuminated push

button switches and lamp holders can be encountered. Due to subjectivity, evaluation of the LED type is recommended,

(samples of all standard models are available). Care should be taken to correctly simulate operating ambient light conditions to

ensure that the correct device has been selected to maximise viewing characteristics such as viewing angle, colour

compatibility and on/ off contrast ratio.

Electro-Static Discharge (ESD)

Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of

possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual

situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood

that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and

assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing

technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have

changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and

despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.

Power De-Rating

The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is

operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the

ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address

these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be

specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, marl should

be contacted if the device is to be operated at a temperature significantly higher than 25°C. Marl accept no liability for any

product that is operated higher than the stated voltage.

providing information, which must not be copied or released to

a third party without prior written consent from marl

international limited. the information provided does not constitute part of any order or contract and should not be regarded as a

representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl

international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.

BS EN ISO 9001:2008

approved manufacturer

marl international limited - dsn 215 RS - version 2014-04-29-173242

page 4 of 4

215-501-22 [MARL]

相关型号：

215-501-22-38

215-501-23-38

215-501-24-38

215-501-25-38

215-501-42-38

215-501-50-38

215-501-72-38

215-501-75-38

215-501-76-38

215-501-77-38

215-501-80-38

215-501-84-38