217-997-76-62 [MARL]
FILAMENT REPLACEMENT LEDs - Multi-LED Cluster; 更换灯丝发光二极管 - 多功能LED集群型号: | 217-997-76-62 |
厂家: | MARL INTERNATIONAL LIMITED |
描述: | FILAMENT REPLACEMENT LEDs - Multi-LED Cluster |
文件: | 总3页 (文件大小:260K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FEATURES
FILAMENT REPLACEMENT LEDs - Multi-LED Cluster
l
l
Direct replacement for E27 (European Standard)
217 SERIES
BA22 (UK) and E26 (North American Standard) also
available
PACK QUANTITY = 1 PIECE
l
l
20 LED Cluster
Optional polycarbonate lens
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
PART NUMBER
COLOUR
LENS
VOLTAGE
AC/DC
Vopr
CURRENT
DC
LUMINOUS
INTENSITY
lv@20mA
WAVE
LENGTH
λp
OPERATING
TEMP
STORAGE
TEMP
lopr
Topr
Tstg
HIGH INTENSITY
217-501-22-65
217-521-22-65
217-532-22-65
217-930-22-65
217-997-22-65
217-501-75-65
217-521-75-65
217-532-75-65
217-930-75-65
217-997-75-65
UNITS
Red
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
Water Clear
24 Vdc
24 Vdc
24 Vdc
24 Vdc
24 Vdc
110 Vac
110 Vac
110 Vac
110 Vac
110 Vac
75
75
75
75
75
22
22
22
22
22
mA
11000
16000
23000
7000
643
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
-40 ~ +95^
0C
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
-40 ~ +100
0C
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yellow
Green
Blue
591
527
470
Cool White
Red
14000
11000
16000
23000
7000
*See below
643
Yellow
Green
Blue
591
527
470
Cool White
14000
mcd
*See below
nm
^ = Products must be derated according to the derating information. Each derating graph refers to
specific LEDs. Appropriate LED numbers shown. - Refer to page 3.
997
x
y
*Typical emission colour cool white
0.296
0.283
0.330
0.330
0.276
0.305
0.360
0.318
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch.
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
Fax: +44 (0)1229 585155
•
Telephone +44 (0)1229 582430
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
Page 1 of
3
© MARL INTERNATIONAL LTD 2008 : DS 007/08 Issue 1
217 Series
97
Dimensions in mm (Typical)
Not to scale
TECHNICAL INFORMATION
Lamp Base Style
Series
217
Metric Equivalent (mm)
Maximum Power Dissipation (mW)
2500
E27 Filament Base
26
DESIGN CONSIDERATIONS
Single-Chip LEDs
All devices feature water clear high intensity LEDs as standard.
Product Evaluation
Filament Replacement LEDs have been specifically designed to meet the primary objective of providing improved reliability. As this product range
is suitable for both new-build and retro-fit, (sometimes in very old systems),
subjectivity, evaluation of the LED
a
wide range of illuminated lamp holders can be encountered. Due to
Power Derating
The forward voltage/current value of an LED is dependant upon the ambient temperature of the environment in which it is operated. Therefore,
care must be taken to operate the LED at the correct voltage/current values, depending upon the ambient temperature. Consequently,
a
recommendation regarding operating voltages and currents is given in order to address these temperature effects. This recommendation is
termed ‘de-rating’.
It is usual for forward voltages and currents to be specified for ambient temperature of 25°C. However, because the values of these qualities vary
with temperature, Marl should be contacted if the device is to be operated at
a
temperature significantly higher than 25°C.
Marl accept no liability for any product that is operated higher than the stated voltage.
Electro-static Discharge (ESD)
Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is
very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to
these levels handles
a
‘static sensitive device’, there is
a
very probable likelihood that the device will be irreversibly damaged. It is essential that
precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static
sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over
a
large range of the
wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. We recommend all users of LED based products follow the guidelines of BS 100015.
Note:
All luminous intensity figures refer to the unmodified discrete LED.
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
Fax: +44 (0)1229 585155
•
Telephone +44 (0)1229 582430
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
BS EN ISO 9001:2000
Approved Manufacturer
© MARL INTERNATIONAL LTD 2008 : DS 007/08 Issue 1
Page 2 of
3
DERATING INFORMATION
997
532, 930
501, 521
ALSO AVAILABLE
Part numbers also available in the 217 Series:
PART NO.
COLOUR
VOLTAGE DC
PART NO.
COLOUR
VOLTAGE DC
PART NO.
COLOUR
VOLTAGE DC
(Vdc) Vopr
24Vdc
(Vdc) Vopr
110Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
115Vac
115Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
24Vdc
(Vdc) Vopr
230Vac
230Vac
230Vac
110Vac
230Vac
230Vac
230Vac
24Vdc
217-501-22-65
217-501-22-76
217-501-23-65
217-501-24-65
217-501-25-65
217-501-25-92
217-501-25-93
217-501-75-55
217-501-75-57
217-501-75-65
217-501-75-90
217-501-76-55
217-501-76-56
217-501-76-57
217-501-76-62
217-501-76-63
217-501-76-65
217-501-76-89
217-509-76-65
217-521-22-65
217-521-75-57
217-521-76-63
217-521-76-65
217-521-77-65
217-532-22-65
217-532-22-76
217-532-25-65
217-532-75-57
UNITS
Red
217-532-75-65
217-532-76-55
217-532-76-57
217-532-76-65
217-551-76-95
217-551-76-96
217-751-76-55
217-904-76-95
217-904-76-96
217-904-86-50
217-904-86-51
217-905-76-95
217-905-76-96
217-907-76-95
217-907-76-96
217-925-76-95
217-925-76-96
217-930-22-65
217-930-23-65
217-930-76-55
217-930-76-57
217-930-76-65
217-940-76-55
217-940-76-57
217-940-76-65
217-940-76-95
217-940-76-96
217-945-76-55
UNITS
Green
Green
Green
Green
Red
217-945-76-65
217-945-76-83
217-971-76-65
217-993-75-65
217-993-76-62
217-993-76-63
217-993-76-65
217-997-22-65
217-997-23-65
217-997-25-65
217-997-25-87
217-997-75-63
217-997-75-65
217-997-75-68
217-997-76-55
217-997-76-57
217-997-76-62
217-997-76-63
217-997-76-65
217-997-76-68
217-997-77-65
UNITS
IR
Red
24Vdc
IR
Red
28Vdc
Green
Warm white
Warm white
Warm white
Warm white
White
Red
48Vdc
Red
110Vdc
110Vdc
110Vdc
110Vac
110Vac
110Vac
110Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
24Vdc
Red
Red
Red
Red
Red
Red
Red
Red
White
28Vdc
Red
Red
White
110Vdc
110Vdc
110Vac
110Vac
110Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
125Vac
Red
Red
White
Red
Orange
Orange
Green
Green
Yellow
Yellow
Blue
Blue
Blue
Blue
Blue
IR
White
Red
White
Red
White
Red
White
Red
White
Red
White
Red
White
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Green
Green
Green
Green
28Vdc
White
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
230Vac
White
110Vac
230Vac
230Vac
125Vac
24Vdc
White
The products listed above illustrate all
of the options available to order. These
products may have custom
modifications that alter their operation
beyond the generic information
IR
IR
24Vdc
IR
110Vdc
110Vac
IR
IR
contained within this datasheet. Please
contact sales for further information.
How to Order:
website: www.marl.co.uk
email: sales@marl.co.uk
Fax: +44 (0)1229 585155
•
Telephone +44 (0)1229 582430
•
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply
for products or service.
BS EN ISO 9001:2000
Approved Manufacturer
© MARL INTERNATIONAL LTD 2007 : DS 007/08 Issue 1
Page 3 of
3
©2020 ICPDF网 联系我们和版权申明