411-501-25 [MARL]
Single Color LED;型号: | 411-501-25 |
厂家: | MARL INTERNATIONAL LIMITED |
描述: | Single Color LED |
文件: | 总6页 (文件大小:686K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
411 series
features
• Ø8.0mm mounting
• Domed fresnel lens styling for wide viewing angle
• Colour diffused lens
• Front panel replaceability
• Must be used in conjunction with 907-000-00 panel socket
• Sealed to IP40
• Pack Quantity = 20 Pieces
specifications
Ordering information and typical characteristics (Ta = 25°C)
Current Luminous
Wave
Length
(nm)
Operating
Temp.
(°C)
Storage
Temp.
(°C)
Part
Voltage
Vac/dc
De-rating
Graphs
Colour
DC
Intensity
(mcd)
Number
(mA)
411-501-21
411-521-21
411-532-21
411-930-21
411-997-21
411-501-23
411-521-23
411-532-23
Red
12 Vdc
12 Vdc
12 Vdc
12 Vdc
12 Vdc
28 Vdc
28 Vdc
28 Vdc
20
20
2800
6100
800
660
580-590
515
-40 - +85
-40 - +80
-40 - +80
-40 - +85
-40 - +120
-40 - +100
A
D
F
-
Yellow
Green
20
20
White
Red
20
1600
600
600
800
* See below -20 - +75
-30 - +80
-40 - +100
-40 - +100
-40 - +100
Q
D
D
F
17.5
17.5
17.5
630
585
515
-40 - +80
-40 - +80
-40 - +80
Yellow
Green
997F-L
*Typical emission colour White
x
y
0.3130
0.3290
-
-
-
-
-
-
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
to order
to order please contact us on: t: +44 (0)1229 582 430
f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the
intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service. no
responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right
BS EN ISO 9001:2008
to alter without notice the specification or any conditions of supply for product or service.
approved manufacturer
marl international limited - dsn 411 - version 2012-12-06-113706
page 1 of 6
411 series
technical data
6.9
22
5.1
Key
Green dot on base of product signifies centre contact cathode -ve.
Dimensions in mm (typical)
Not to scale
Coloured dot on LED denotes LED colour
housing material
Body
Nylon 6
Termination pins
Fresnel lens
Header
Tin on Nickel Plated Phosphor Bronze
Polycarbonate
Nylon 6
Rear retainer
Mounting hardware
Spring Steel
Use with socket 907-000-00. Use wth socket 908-000-00 when diode test facility is specified
technical characteristics
Max. Power
Max. Reverse
Voltage
Min. Mounting
Centres
Max. Panel
Thickness
Series
Panel Cutout
Dissipation
411
500
3
8.0
17.0
13.0
units
mW
Vdc
mm
mm
mm
panel sockets & connectors
909-000-00 is gold plated
910-000-00is tin plated
For use with 907 and 908 series panel sockets.
Suitable for wire sizes from 0.15mm2 to 0.38mm2 cross sectional area.
Dimensions in mm (typical). Not to scale.
Dual metal contact design provides low resistance and gas tight electrical contact
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 411 - version 2012-12-06-113706
page 2 of 6
411 series
optional reverse protection diode
Order Code
Suffix
Circuit
Comments
Available on all indicators except bi-colour
devices
01
optional diode test facility
Order Code
Suffix
Termination
Circuit
Comments
03
05
09
3 pin 908-000-00 socket
150mm flying leads, colours as shown
1000mm flying leads, colours as shown
Test positive
Not available with bi-
colour LED
04
06
10
3 pin 908-000-00 socket
150mm flying leads, colours as shown
1000mm flying leads, colours as shown
Test negative
test positive
test negative
de-rating information
Derating Graph A
Derating Graph D
Derating Graph F
55
55
50
45
40
35
30
25
20
15
10
5
55
50
45
40
35
30
25
20
15
10
5
50
45
40
35
30
25
20
15
10
5
6
0
0
0
0.0
20.0
40.0
60.0
80.0 100.0
0.0
20.0
40.0
60.0
80.0 100.0
0.0
20.0
40.0
60.0
80.0 100.0
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
Ambient Temperature Ta (°C)
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 411 - version 2012-12-06-113706
page 3 of 6
411 series
de-rating information continued
Derating Graph Q
55
50
45
40
35
30
25
20
15
10
5
0
0.0
20.0
40.0
60.0
80.0 100.0
Ambient Temperature Ta (°C)
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 411 - version 2012-12-06-113706
page 4 of 6
411 series
also available
Part numbers also available in the 411 series:
Part
Voltage
Vopr
Colour
Number
411-501-22
411-501-22-03
411-501-22-04
411-501-23-03
411-501-25
Red
Red
Red
Red
Red
24 Vdc
24 Vdc
24 Vdc
28 Vdc
110 Vdc
50 Vdc
411-501-53
Red
411-501-75
411-503-22
Red
Red
110 Vac 50 Hz
24 Vdc
411-503-22-03
411-503-22-04
411-503-22-05
411-503-22-50
411-503-22-51
411-503-23
Red
Red
Red
Red
Red
Red
24 Vdc
24 Vdc
24 Vdc
24 Vdc
24 Vdc
28 Vdc
411-503-24-03
411-503-76
411-506-20-03
411-506-22
411-506-22-03
411-509-22
411-509-22-03
411-509-22-04
411-512-22
Red
Red
48 Vdc
230 Vac 50 Hz
5/6 Vdc
24 Vdc
Orange
Orange
Orange
Yellow
Yellow
Yellow
Green
Green
Blue
24 Vdc
24 Vdc
24 Vdc
24 Vdc
24 Vdc
24 Vdc
24 Vdc
411-512-22-03
411-519-22
411-519-22-03
411-519-22-50
411-521-22-03
411-532-22-03
411-532-24-03
411-532-76
411-532-76-13
411-532-76-15
411-930-22
Blue
Blue
24 Vdc
24 Vdc
24 Vdc
24 Vdc
Yellow
Green
Green
Green
Green
Green
Blue
48 Vdc
230 Vac 50 Hz
230 Vac 50 Hz
230 Vac 50 Hz
24 Vdc
411-930-22-03
411-930-22-50
411-997-22
411-997-25
411-997-43
Blue
Blue
White
White
White
White
24 Vdc
24 Vdc
24 Vdc
110 Vdc
18 Vdc
411-997-75
110 Vac 50 Hz
Products listed above illustrate all of the options available to order. These products may have custom
modifications that alter their operation beyond the generic information contained within this datasheet.
Please contact sales for further information.
RP = Reverse Polarity
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 411 - version 2012-12-06-113706
page 5 of 6
411 series
Electro-Static Discharge (ESD)
design considerations
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of
possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual
situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood
that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and
assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing
technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have
changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.
Power De-Rating
The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is
operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the
ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address
these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be
specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, marl should
be contacted if the device is to be operated at a temperature significantly higher than 25°C. Marl accept no liability for any
product that is operated higher than the stated voltage.
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: sales@marl.co.uk w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for the intention of
providing information, which must not be copied or released to
a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order or contract and should not be regarded as a
representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl
international limited reserve the right to alter without notice the specification or any conditions of supply for product or service.
BS EN ISO 9001:2008
approved manufacturer
marl international limited - dsn 411 - version 2012-12-06-113706
page 6 of 6
相关型号:
©2020 ICPDF网 联系我们和版权申明